Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utili...Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utilizing the reactive power capability of PV inverters to mitigate voltage deviations is being promoted.In recent years,droop control of inverter-based distributed energy resources has emerged as an essential tool for use in this study.The participation of PV systems in voltage regulation and its coordination with existing controllers,such as on-load tap changers,is paramount for controlling the voltage within specified limits.In this work,control strategies are presented that can be coordinated with the existing controls in a distributed manner.The effectiveness of the proposed method was demonstrated through simulation results on a distribution system.展开更多
The underwater tapping machine is composed of a center bit, a tapping cutter, a seal box, a main drive box, a boring bar assembly, a envelop, a gear case, a counter and so on. The drive system in underwater tapping ma...The underwater tapping machine is composed of a center bit, a tapping cutter, a seal box, a main drive box, a boring bar assembly, a envelop, a gear case, a counter and so on. The drive system in underwater tapping machine consists of a worm drive, a gear drive system and a screw drive. The worm drive is in the main drive box. The worm is connected with a hydraulic motor and driven by the hydraulic motor. The gear drive system is a combined gear train which is the combinations of the fixed axes and differential gear train in the gear case. On the one hand, by means of the fixed axes gear trains the turn and power of transmission shaft are transferred to the boring bar and the screw rod, causing differential turn between the boring bar and the screw rod. On the other hand, the turns of the boring bar and the screw rod are transferred to the differential gear train. The differential gear train is used to drive a special counter to count axial travel of the boring bar. The screw drive is composed of a feed screw and a nut on the boring bar. There is the differential turn between the boring bar and the feed screw. By means of the nut, the boring bar can feed automatically. With the movement of the sliding gear 7 in the gear case, the designed drive system can also be provided with the ability of fast forward and fast backward movement of the boring bar in its idle motion, resulting in the increase of the tapping efficiency.展开更多
A technique using artificial neural networks trained with parameters derived from delay tap plots for optical performance monitoring in 40 Gbit/s duobinary system is demonstrated. Firstly, the optical signal is delay ...A technique using artificial neural networks trained with parameters derived from delay tap plots for optical performance monitoring in 40 Gbit/s duobinary system is demonstrated. Firstly, the optical signal is delay tap sampled to obtain two-dimensional histogram, known as delay tap plots. Secondly, the features of delay tap plots are extracted to train the feed forward, three-layer preceptor structure artificial neural networks. Finally, the outputs of trained neural network are used to monitor optical duobinary signal impairments. Simulation of optical signal noise ratio （ OSNR）, chromatic dispersion （CD）, and differential group delay （DGD） monitoring in 40 Gbit/s optical duo- binary system is presented. The proposed monitoring scheme can accurately identify simultaneous impairments without requiring synchronous sampling or data clock recovery. The proposed technique is simple, cost-effective and suitable for in-service distributed OPM.展开更多
黑碳(BC)作为可吸入颗粒物PM_(2.5)的重要组成部分,由于其特殊的理化性质,对大气环境和人类健康构成严重威胁。目前,我国尚未建立完善的大气黑碳浓度地面观测网络和数据共享体系,区域尺度黑碳浓度产品的精度验证和适用性评价比较有限。...黑碳(BC)作为可吸入颗粒物PM_(2.5)的重要组成部分,由于其特殊的理化性质,对大气环境和人类健康构成严重威胁。目前,我国尚未建立完善的大气黑碳浓度地面观测网络和数据共享体系,区域尺度黑碳浓度产品的精度验证和适用性评价比较有限。本文从已发表文献中提取我国126个站点的1616个BC月监测数据,时间跨度为2000−2020年,对MERRA-2(Modern-Era Retrospective Analysis for Research and Applications,Version 2)和TAP(Tracking Air Pollution in China)的BC数据进行全面的精度验证和适用性评价。结果表明:①MERRA-2与TAP均低估了我国大气BC浓度,其中MERRA-2低估程度为8.13%,TAP低估程度为19.51%。TAP的大气BC浓度与地面站点监测数据的相关性〔R=0.62,模拟实测两倍因子(FAC2)=0.69〕高于MERRA-2(R=0.46,FAC2=0.58),MERRA-2的20年平均大气BC浓度(3.61μg/m^(3))更接近地面站点平均大气BC浓度(3.97μg/m^(3))。②MERRA-2和TAP的大气BC浓度在我国不同地区的精度存在较大差别,MERRA-2在我国华北和西南地区的精度优于TAP。两个数据集在西南地区都有较高的精度(R为0.68~0.84,FAC2为0.71~0.79),在华北地区精度均较低(R为0.41~0.48,FAC2为0.64~0.77)。③MERRA-2与TAP大气BC浓度在全国大部分地区呈显著正相关,其中,二者在四川省大气BC浓度差异(0.0045μg/m^(3))最小,在北京市差异(2.11μg/m^(3))最大。研究显示,MERRA-2有更长的时间跨度,而TAP更能准确表现大气BC浓度的空间分布,且二者在不同地区表现出较大差异。展开更多
Oversampling is commonly encountered in orthogonal frequency division multiplexing (OFDM) systems to ease various performance characteristics. In this paper, we investigate the performance and complexity of one tap ze...Oversampling is commonly encountered in orthogonal frequency division multiplexing (OFDM) systems to ease various performance characteristics. In this paper, we investigate the performance and complexity of one tap zero-forcing (ZF) and minimum mean-square error (MMSE) equalizers in oversampled OFDM systems. Theoretical analysis and simulation results show that oversampling not only reduces the noise at equalizer output but also helps mitigate ill effects of spectral nulls. One tap equalizers therefore yield improved symbol-error-rate (SER) performance with the increase in oversampling rate, but at the expense of increased system bandwidth and modest complexity requirements.展开更多
Groundwater,surface water and tap water contamination by PTEs(Potentially Toxic Elements)was assessed in Kipushi town and Lupoto locality of Kipushi administrative territory in the Upper-Katanga province,Democratic Re...Groundwater,surface water and tap water contamination by PTEs(Potentially Toxic Elements)was assessed in Kipushi town and Lupoto locality of Kipushi administrative territory in the Upper-Katanga province,Democratic Republic of Congo.A total of fifty four water samples including thirty two samples from drilled water wells,ten samples from spade-sunk water wells,six samples from supplied tap water,four samples from a mine effluent and two samples from a river were collected from both localities in November and December 2017 and in January,February and March 2018.Then the samples were analyzed for their PTE contents by ICP-SF-MS(Inductively Coupled Plasma-Sector Field Mass Spectrometry).Twenty PTEs including aluminum,arsenic,barium,bismuth,cadmium,cesium,chromium,cobalt,copper,iron,lead,manganese,molybdenum,nickel,strontium,thallium,tungsten,uranium,vanadium and zinc were detected at various concentrations in each one of the samples.Many samples had concentrations and mean concentrations of PTE,such as arsenic,aluminum,cadmium,iron,lead,manganese and zinc,higher than the respective acceptable limits set for drinking water by the EU(European Union),the USEPA(United States Environmental Protection Agency),and the WHO(World Health Organization)standards.Most PTEs being deleterious to human health even at very low concentrations,people who use the groundwater,surface water and tap water to meet their water needs in both localities are at risk.展开更多
As an emerging environmental contaminant,antibiotic resistance genes(ARGs)in tap water have attracted great attention.Although studies have provided ARG profiles in tap water,research on their abundance levels,composi...As an emerging environmental contaminant,antibiotic resistance genes(ARGs)in tap water have attracted great attention.Although studies have provided ARG profiles in tap water,research on their abundance levels,composition characteristics,and potential threat is still insufficient.Here,9 household tap water samples were collected from the Guangdong-Hong Kong-Macao Greater Bay Area(GBA)in China.Additionally,75 sets of environmental sample data(9 types)were downloaded from the public database.Metagenomics was then performed to explore the differences in the abundance and composition of ARGs.221 ARG subtypes consisting of 17 types were detected in tap water.Although the ARG abundance in tap water was not significantly different from that found in drinking water plants and reservoirs,their composition varied.In tap water samples,the three most abundant classes of resistance genes were multidrug,fosfomycin and MLS(macrolide-lincosamidestreptogramin)ARGs,and their corresponding subtypes ompR,fosX and macB were also the most abundant ARG subtypes.Regarding the potential mobility,vanS had the highest abundance on plasmids and viruses,but the absence of key genes rendered resistance to vancomycin ineffective.Generally,the majority of ARGs present in tap water were those that have not been assessed and are currently not listed as high-threat level ARG families based on the World Health Organization Guideline.Although the current potential threat to human health posed by ARGs in tap water is limited,with persistent transfer and accumulation,especially in pathogens,the potential danger to human health posed by ARGs should not be ignored.展开更多
2025年11月,中国科学院杭州医学研究所余陈欢团队在《Carbohydrate Polymers》(IF=12.5)上发表题为“A new fucosylated glucuronoxylomannan from the fruit bodies of Tremella aurantia:structural characterization and immunoenhan...2025年11月,中国科学院杭州医学研究所余陈欢团队在《Carbohydrate Polymers》(IF=12.5)上发表题为“A new fucosylated glucuronoxylomannan from the fruit bodies of Tremella aurantia:structural characterization and immunoenhancing activity on seasonal influenza mRNA vaccine”的研究论文。展开更多
利用2013、2016、2019、2023年对橡胶种植户调查的数据,分析农户胶园结构以及割胶生产、胶园管理等方面的行为变化,结果发现:胶园树龄结构逐渐进入老龄化,自主选育品种的面积占比逐步提高,海南民营胶园10年间每公顷有效株数减少48株;橡...利用2013、2016、2019、2023年对橡胶种植户调查的数据,分析农户胶园结构以及割胶生产、胶园管理等方面的行为变化,结果发现:胶园树龄结构逐渐进入老龄化,自主选育品种的面积占比逐步提高,海南民营胶园10年间每公顷有效株数减少48株;橡胶园流转频率低、面积小,2022年正常割胶的农户比重较2018年有所提高,2 d 1刀仍是海南民营胶园和西双版纳胶园的最重要割制,但西双版纳地区2022年采用3 d 1刀的农户比重较2018年增加25个百分点;2018年和2022年有施肥的农户比重较2012年明显下降,其中西双版纳2018年和2022年有施肥农户占比不足2012年的一半,但胶农都重视胶园杂草管理。展开更多
The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the paramet...The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the parameter optimization of tap structures is also correlated with the variation of tapping forces. Therefore, the study of tapping forces is necessary in developing new style taps. Several experiments about some novel carbide taps are performed on a vertical machining center by a Kistler dynamometer system in blind tapping both gray cast iron and ductile cast iron. And the variations of tapping forces are analyzed in tapping-in and tapping-out periods. It indicates that cutting forces hardly vary with the tap wear in tapping cast iron. Contrarily, tapping forces are closely correlated with the holding method. Besides, it also depends on the helix angle, the flute numbers and the plasticity of the work material to some extent.展开更多
基金by a project under the scheme entitled“Developing Policies&Adaptation Strategies to Climate Change in the Baltic Sea Region”(ASTRA),Project No.ASTRA6-4(2014-2020.4.01.16-0032).
文摘Decreasing costs and favorable policies have resulted in increased penetration of solar photovoltaic(PV)power generation in distribution networks.As the PV systems penetration is likely to increase in the future,utilizing the reactive power capability of PV inverters to mitigate voltage deviations is being promoted.In recent years,droop control of inverter-based distributed energy resources has emerged as an essential tool for use in this study.The participation of PV systems in voltage regulation and its coordination with existing controllers,such as on-load tap changers,is paramount for controlling the voltage within specified limits.In this work,control strategies are presented that can be coordinated with the existing controls in a distributed manner.The effectiveness of the proposed method was demonstrated through simulation results on a distribution system.
基金supported by the National High Technology Research and Development Program of China(863 Program, Grant No.2002AA602012-2)
文摘The underwater tapping machine is composed of a center bit, a tapping cutter, a seal box, a main drive box, a boring bar assembly, a envelop, a gear case, a counter and so on. The drive system in underwater tapping machine consists of a worm drive, a gear drive system and a screw drive. The worm drive is in the main drive box. The worm is connected with a hydraulic motor and driven by the hydraulic motor. The gear drive system is a combined gear train which is the combinations of the fixed axes and differential gear train in the gear case. On the one hand, by means of the fixed axes gear trains the turn and power of transmission shaft are transferred to the boring bar and the screw rod, causing differential turn between the boring bar and the screw rod. On the other hand, the turns of the boring bar and the screw rod are transferred to the differential gear train. The differential gear train is used to drive a special counter to count axial travel of the boring bar. The screw drive is composed of a feed screw and a nut on the boring bar. There is the differential turn between the boring bar and the feed screw. By means of the nut, the boring bar can feed automatically. With the movement of the sliding gear 7 in the gear case, the designed drive system can also be provided with the ability of fast forward and fast backward movement of the boring bar in its idle motion, resulting in the increase of the tapping efficiency.
基金Supported by the National Natural Science Foundation of China (60978007 61027007 61177067)
文摘A technique using artificial neural networks trained with parameters derived from delay tap plots for optical performance monitoring in 40 Gbit/s duobinary system is demonstrated. Firstly, the optical signal is delay tap sampled to obtain two-dimensional histogram, known as delay tap plots. Secondly, the features of delay tap plots are extracted to train the feed forward, three-layer preceptor structure artificial neural networks. Finally, the outputs of trained neural network are used to monitor optical duobinary signal impairments. Simulation of optical signal noise ratio （ OSNR）, chromatic dispersion （CD）, and differential group delay （DGD） monitoring in 40 Gbit/s optical duo- binary system is presented. The proposed monitoring scheme can accurately identify simultaneous impairments without requiring synchronous sampling or data clock recovery. The proposed technique is simple, cost-effective and suitable for in-service distributed OPM.
文摘黑碳(BC)作为可吸入颗粒物PM_(2.5)的重要组成部分,由于其特殊的理化性质,对大气环境和人类健康构成严重威胁。目前,我国尚未建立完善的大气黑碳浓度地面观测网络和数据共享体系,区域尺度黑碳浓度产品的精度验证和适用性评价比较有限。本文从已发表文献中提取我国126个站点的1616个BC月监测数据,时间跨度为2000−2020年,对MERRA-2(Modern-Era Retrospective Analysis for Research and Applications,Version 2)和TAP(Tracking Air Pollution in China)的BC数据进行全面的精度验证和适用性评价。结果表明:①MERRA-2与TAP均低估了我国大气BC浓度,其中MERRA-2低估程度为8.13%,TAP低估程度为19.51%。TAP的大气BC浓度与地面站点监测数据的相关性〔R=0.62,模拟实测两倍因子(FAC2)=0.69〕高于MERRA-2(R=0.46,FAC2=0.58),MERRA-2的20年平均大气BC浓度(3.61μg/m^(3))更接近地面站点平均大气BC浓度(3.97μg/m^(3))。②MERRA-2和TAP的大气BC浓度在我国不同地区的精度存在较大差别,MERRA-2在我国华北和西南地区的精度优于TAP。两个数据集在西南地区都有较高的精度(R为0.68~0.84,FAC2为0.71~0.79),在华北地区精度均较低(R为0.41~0.48,FAC2为0.64~0.77)。③MERRA-2与TAP大气BC浓度在全国大部分地区呈显著正相关,其中,二者在四川省大气BC浓度差异(0.0045μg/m^(3))最小,在北京市差异(2.11μg/m^(3))最大。研究显示,MERRA-2有更长的时间跨度,而TAP更能准确表现大气BC浓度的空间分布,且二者在不同地区表现出较大差异。
文摘Oversampling is commonly encountered in orthogonal frequency division multiplexing (OFDM) systems to ease various performance characteristics. In this paper, we investigate the performance and complexity of one tap zero-forcing (ZF) and minimum mean-square error (MMSE) equalizers in oversampled OFDM systems. Theoretical analysis and simulation results show that oversampling not only reduces the noise at equalizer output but also helps mitigate ill effects of spectral nulls. One tap equalizers therefore yield improved symbol-error-rate (SER) performance with the increase in oversampling rate, but at the expense of increased system bandwidth and modest complexity requirements.
文摘Groundwater,surface water and tap water contamination by PTEs(Potentially Toxic Elements)was assessed in Kipushi town and Lupoto locality of Kipushi administrative territory in the Upper-Katanga province,Democratic Republic of Congo.A total of fifty four water samples including thirty two samples from drilled water wells,ten samples from spade-sunk water wells,six samples from supplied tap water,four samples from a mine effluent and two samples from a river were collected from both localities in November and December 2017 and in January,February and March 2018.Then the samples were analyzed for their PTE contents by ICP-SF-MS(Inductively Coupled Plasma-Sector Field Mass Spectrometry).Twenty PTEs including aluminum,arsenic,barium,bismuth,cadmium,cesium,chromium,cobalt,copper,iron,lead,manganese,molybdenum,nickel,strontium,thallium,tungsten,uranium,vanadium and zinc were detected at various concentrations in each one of the samples.Many samples had concentrations and mean concentrations of PTE,such as arsenic,aluminum,cadmium,iron,lead,manganese and zinc,higher than the respective acceptable limits set for drinking water by the EU(European Union),the USEPA(United States Environmental Protection Agency),and the WHO(World Health Organization)standards.Most PTEs being deleterious to human health even at very low concentrations,people who use the groundwater,surface water and tap water to meet their water needs in both localities are at risk.
基金supported by the National Key R&D Program of China(No.2022YFE0103200)the Hubei Provincial Natural Science Foundation of China(No.2021CFB016)the National Natural Science Foundation of China(No.52100217).
文摘As an emerging environmental contaminant,antibiotic resistance genes(ARGs)in tap water have attracted great attention.Although studies have provided ARG profiles in tap water,research on their abundance levels,composition characteristics,and potential threat is still insufficient.Here,9 household tap water samples were collected from the Guangdong-Hong Kong-Macao Greater Bay Area(GBA)in China.Additionally,75 sets of environmental sample data(9 types)were downloaded from the public database.Metagenomics was then performed to explore the differences in the abundance and composition of ARGs.221 ARG subtypes consisting of 17 types were detected in tap water.Although the ARG abundance in tap water was not significantly different from that found in drinking water plants and reservoirs,their composition varied.In tap water samples,the three most abundant classes of resistance genes were multidrug,fosfomycin and MLS(macrolide-lincosamidestreptogramin)ARGs,and their corresponding subtypes ompR,fosX and macB were also the most abundant ARG subtypes.Regarding the potential mobility,vanS had the highest abundance on plasmids and viruses,but the absence of key genes rendered resistance to vancomycin ineffective.Generally,the majority of ARGs present in tap water were those that have not been assessed and are currently not listed as high-threat level ARG families based on the World Health Organization Guideline.Although the current potential threat to human health posed by ARGs in tap water is limited,with persistent transfer and accumulation,especially in pathogens,the potential danger to human health posed by ARGs should not be ignored.
文摘2025年11月,中国科学院杭州医学研究所余陈欢团队在《Carbohydrate Polymers》(IF=12.5)上发表题为“A new fucosylated glucuronoxylomannan from the fruit bodies of Tremella aurantia:structural characterization and immunoenhancing activity on seasonal influenza mRNA vaccine”的研究论文。
文摘利用2013、2016、2019、2023年对橡胶种植户调查的数据,分析农户胶园结构以及割胶生产、胶园管理等方面的行为变化,结果发现:胶园树龄结构逐渐进入老龄化,自主选育品种的面积占比逐步提高,海南民营胶园10年间每公顷有效株数减少48株;橡胶园流转频率低、面积小,2022年正常割胶的农户比重较2018年有所提高,2 d 1刀仍是海南民营胶园和西双版纳胶园的最重要割制,但西双版纳地区2022年采用3 d 1刀的农户比重较2018年增加25个百分点;2018年和2022年有施肥的农户比重较2012年明显下降,其中西双版纳2018年和2022年有施肥农户占比不足2012年的一半,但胶农都重视胶园杂草管理。
文摘The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the parameter optimization of tap structures is also correlated with the variation of tapping forces. Therefore, the study of tapping forces is necessary in developing new style taps. Several experiments about some novel carbide taps are performed on a vertical machining center by a Kistler dynamometer system in blind tapping both gray cast iron and ductile cast iron. And the variations of tapping forces are analyzed in tapping-in and tapping-out periods. It indicates that cutting forces hardly vary with the tap wear in tapping cast iron. Contrarily, tapping forces are closely correlated with the holding method. Besides, it also depends on the helix angle, the flute numbers and the plasticity of the work material to some extent.
