The Galerkin and least-squares methods are two classes of the most popular Krylov subspace methOds for solving large linear systems of equations. Unfortunately, both the methods may suffer from serious breakdowns of t...The Galerkin and least-squares methods are two classes of the most popular Krylov subspace methOds for solving large linear systems of equations. Unfortunately, both the methods may suffer from serious breakdowns of the same type: In a breakdown situation the Galerkin method is unable to calculate an approximate solution, while the least-squares method, although does not really break down, is unsucessful in reducing the norm of its residual. In this paper we first establish a unified theorem which gives a relationship between breakdowns in the two methods. We further illustrate theoretically and experimentally that if the coefficient matrix of a lienar system is of high defectiveness with the associated eigenvalues less than 1, then the restarted Galerkin and least-squares methods will be in great risks of complete breakdowns. It appears that our findings may help to understand phenomena observed practically and to derive treatments for breakdowns of this type.展开更多
The main purpose of reverse engineering is to convert discrete data pointsinto piecewise smooth, continuous surface models. Before carrying out model reconstruction it issignificant to extract geometric features becau...The main purpose of reverse engineering is to convert discrete data pointsinto piecewise smooth, continuous surface models. Before carrying out model reconstruction it issignificant to extract geometric features because the quality of modeling greatly depends on therepresentation of features. Some fitting techniques of natural quadric surfaces with least-squaresmethod are described. And these techniques can be directly used to extract quadric surfaces featuresduring the process of segmentation for point cloud.展开更多
A least-squares finite-element method （LSFEM） for the non-conservative shallow-water equations is presented. The model is capable of handling complex topography, steady and unsteady flows, subcritical and supercriti...A least-squares finite-element method （LSFEM） for the non-conservative shallow-water equations is presented. The model is capable of handling complex topography, steady and unsteady flows, subcritical and supercritical flows, and flows with smooth and sharp gradient changes. Advantages of the model include： （1） sources terms, such as the bottom slope, surface stresses and bed frictions, can be treated easily without any special treatment; （2） upwind scheme is no needed; （3） a single approximating space can be used for all variables, and its choice of approximating space is not subject to the Ladyzhenskaya-Babuska-Brezzi （LBB） condition; and （4） the resulting system of equations is symmetric and positive-definite （SPD） which can be solved efficiently with the preconditioned conjugate gradient method. The model is verified with flow over a bump, tide induced flow, and dam-break. Computed results are compared with analytic solutions or other numerical results, and show the model is conservative and accurate. The model is then used to simulate flow past a circular cylinder. Important flow charac-teristics, such as variation of water surface around the cylinder and vortex shedding behind the cylinder are investigated. Computed results compare well with experiment data and other numerical results.展开更多
Numerical solution of shallow-water equations （SWE） has been a challenging task because of its nonlinear hyperbolic nature, admitting discontinuous solution, and the need to satisfy the C-property. The presence of s...Numerical solution of shallow-water equations （SWE） has been a challenging task because of its nonlinear hyperbolic nature, admitting discontinuous solution, and the need to satisfy the C-property. The presence of source terms in momentum equations, such as the bottom slope and friction of bed, compounds the difficulties further. In this paper, a least-squares finite-element method for the space discretization and θ-method for the time integration is developed for the 2D non-conservative SWE including the source terms. Advantages of the method include： the source terms can be approximated easily with interpolation functions, no upwind scheme is needed, as well as the resulting system equations is symmetric and positive-definite, therefore, can be solved efficiently with the conjugate gradient method. The method is applied to steady and unsteady flows, subcritical and transcritical flow over a bump, 1D and 2D circular dam-break, wave past a circular cylinder, as well as wave past a hump. Computed results show good C-property, conservation property and compare well with exact solutions and other numerical results for flows with weak and mild gradient changes, but lead to inaccurate predictions for flows with strong gradient changes and discontinuities.展开更多
The purpose of this article is to develop and analyze least-squares approximations for the incompressible magnetohydrodynamic equations. The major advantage of the least-squares finite element method is that it is not...The purpose of this article is to develop and analyze least-squares approximations for the incompressible magnetohydrodynamic equations. The major advantage of the least-squares finite element method is that it is not subjected to the so-called Ladyzhenskaya-Babuska-Brezzi （LBB） condition. The authors employ least-squares functionals which involve a discrete inner product which is related to the inner product in H^-1（Ω）.展开更多
With the development of computational power, there has been an increased focus on data-fitting related seismic inversion techniques for high fidelity seismic velocity model and image, such as full-waveform inversion a...With the development of computational power, there has been an increased focus on data-fitting related seismic inversion techniques for high fidelity seismic velocity model and image, such as full-waveform inversion and least squares migration. However, though more advanced than conventional methods, these data fitting methods can be very expensive in terms of computational cost. Recently, various techniques to optimize these data-fitting seismic inversion problems have been implemented to cater for the industrial need for much improved efficiency. In this study, we propose a general stochastic conjugate gradient method for these data-fitting related inverse problems. We first prescribe the basic theory of our method and then give synthetic examples. Our numerical experiments illustrate the potential of this method for large-size seismic inversion application.展开更多
For the second-order finite volume method,implicit schemes and reconstruction methods are two main algorithms which influence the robustness and efficiency of the numerical simulations of compressible turbulent flows....For the second-order finite volume method,implicit schemes and reconstruction methods are two main algorithms which influence the robustness and efficiency of the numerical simulations of compressible turbulent flows.In this paper,a compact least-squares reconstruction method is proposed to calculate the gradients for the distribution of flow field variables approximation.The compactness of the new reconstruction method is reflected in the gradient calculation process.The geometries of the face-neighboring elements are no longer utilized,and the weighted average values at the centroid of the interfaces are used to calculate the gradients instead of the values at the centroid of the face-neighboring elements.Meanwhile,an exact Jacobian solving strategy is developed for implicit temporal discretization.The accurate processing of Jacobian matrix can extensively improve the invertibility of the Jacobian matrix and avoid introducing extra numerical errors.In addition,a modified Venkatakrishnan limiter is applied to deal with the shock which may appear in transonic flows and the applicability of the mentioned methods is enhanced further.The combination of the proposed methods makes the numerical simulations of turbulent flow converge rapidly and steadily with an adaptive increasing CFL number.The numerical results of several benchmarks indicate that the proposed methods perform well in terms of robustness,efficiency and accuracy,and have good application potential in turbulent flow simulations of complex configurations.展开更多
Scientific forecasting water yield of mine is of great significance to the safety production of mine and the colligated using of water resources. The paper established the forecasting model for water yield of mine, co...Scientific forecasting water yield of mine is of great significance to the safety production of mine and the colligated using of water resources. The paper established the forecasting model for water yield of mine, combining neural network with the partial least square method. Dealt with independent variables by the partial least square method, it can not only solve the relationship between independent variables but also reduce the input dimensions in neural network model, and then use the neural network which can solve the non-linear problem better. The result of an example shows that the prediction has higher precision in forecasting and fitting.展开更多
A least-squares mixed finite element (LSMFE) method for the numerical solution of fourth order parabolic problems analyzed and developed in this paper. The Ciarlet-Raviart mixed finite element space is used to approxi...A least-squares mixed finite element (LSMFE) method for the numerical solution of fourth order parabolic problems analyzed and developed in this paper. The Ciarlet-Raviart mixed finite element space is used to approximate. The a posteriori error estimator which is needed in the adaptive refinement algorithm is proposed. The local evaluation of the least-squares functional serves as a posteriori error estimator. The posteriori errors are effectively estimated. The convergence of the adaptive least-squares mixed finite element method is proved.展开更多
A least-squares mixed finite element method was formulated for a class of Stokes equations in two dimensional domains. The steady state and the time-dependent Stokes' equations were considered. For the stationary ...A least-squares mixed finite element method was formulated for a class of Stokes equations in two dimensional domains. The steady state and the time-dependent Stokes' equations were considered. For the stationary equation, optimal H-t and L-2-error estimates are derived under the standard regularity assumption on the finite element partition ( the LBB-condition is not required). Far the evolutionary equation, optimal L-2 estimates are derived under the conventional Raviart-Thomas spaces.展开更多
In this paper, a least-squares finite element method for the upper-convected Maxell (UCM) fluid is proposed. We first linearize the constitutive and momentum equations and then apply a least-squares method to the line...In this paper, a least-squares finite element method for the upper-convected Maxell (UCM) fluid is proposed. We first linearize the constitutive and momentum equations and then apply a least-squares method to the linearized version of the viscoelastic UCM model. The L2 least-squares functional involves the residuals of each equation multiplied by proper weights. The corresponding homogeneous functional is equivalent to a natural norm. The error estimates of the finite element solution are analyzed when the conforming piecewise polynomial elements are used for the unknowns.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
In this paper,we present a novel initial costates solver for initializing time-optimal trajectory problems in relative motion with continuous low thrust.The proposed solver consists of two primary components:training ...In this paper,we present a novel initial costates solver for initializing time-optimal trajectory problems in relative motion with continuous low thrust.The proposed solver consists of two primary components:training a Multilayer Perceptron(MLP)for generating reference sequence and Time of Flight(TOF)to the target,and deriving a system of linear algebraic equations for obtaining the initial costates.To overcome the challenge of generating training samples for the MLP,the backward generation method is proposed to obtain five different training databases.The training database and sample form are determined by analyzing the input and output correlation using the Pearson correlation coefficient.The best-performing MLP is obtained by analyzing the training results with various hyper-parameter combinations.A reference sequence starting from the initial states is obtained by integrating forward with the near-optimal control vector from the output of MLP.Finally,a system of linear algebraic equations for estimating the initial costates is derived using the reference sequence and the necessary conditions for optimality.Simulation results demonstrate that the proposed initial costates solver improves the convergence ratio and reduce the function calls of the shooting function.Furthermore,Monte-Carlo simulation illustrates that the initial costates solver is applicable to different initial velocities,demonstrating excellent generalization ability.展开更多
Many science and engineering applications involve solvinga linear least-squares system formed from some field measurements. In the distributed cyber-physical systems(CPS),each sensor node used for measurement often on...Many science and engineering applications involve solvinga linear least-squares system formed from some field measurements. In the distributed cyber-physical systems(CPS),each sensor node used for measurement often only knowspartial independent rows of the least-squares system. To solve the least-squares all the measurements must be gathered at a centralized location and then perform the computa-tion. Such data collection and computation are inefficient because of bandwidth and time constraints and sometimes areinfeasible because of data privacy concerns. Iterative methods are natural candidates for solving the aforementionedproblem and there are many studies regarding this. However,most of the proposed solutions are related to centralized/parallel computations while only a few have the potential to beapplied in distributed networks. Thus distributed computations are strongly preferred or demanded in many of the realworld applications, e.g. smart-grid, target tracking, etc. Thispaper surveys the representative iterative methods for distributed least-squares in networks.展开更多
Background:This article investigates the Least-Squares Monte Carlo Method by using different polynomial basis in American Asian Options pricing.The standard approach in the option pricing literature is to choose the b...Background:This article investigates the Least-Squares Monte Carlo Method by using different polynomial basis in American Asian Options pricing.The standard approach in the option pricing literature is to choose the basis arbitrarily.By comparing four different polynomial basis we show that the choice of basis interferes in the option's price.Methods:We assess Least-Squares Method performance in pricing four different American Asian Options by using four polynomial basis:Power,Laguerre,Legendre and Hermite A.To every American Asian Option priced,three sets of parameters are used in order to evaluate it properly.Results:We show that the choice of the basis interferes in the option's price by showing that one of them converges to the option's value faster than any other by using fewer simulated paths.In the case of an Amerasian call option,for example,we find that the preferable polynomial basis is Hermite A.For an Amerasian put option,the Power polynomial basis is recommended.Such empirical outcome is theoretically unpredictable,since in principle all basis can be indistinctly used when pricing the derivative.Conclusion:In this article The Least-Squares Monte Carlo Method performance is assessed in pricing four different types of American Asian Options by using four different polynomial basis through three different sets of parameters.Our results suggest that one polynomial basis is best suited to perform the method when pricing an American Asian option.Theoretically all basis can be indistinctly used when pricing the derivative.However,our results does not confirm these.We find that when pricing an American Asian put option,Power A is better than the other basis we have studied here whereas when pricing an American Asian call,Hermite A is better.展开更多
This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations...This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
The full-spectrum least-squares(FSLS) method is introduced to perform quantitative energy-dispersive X-ray fluorescence analysis for unknown solid samples.Based on the conventional least-squares principle, this spectr...The full-spectrum least-squares(FSLS) method is introduced to perform quantitative energy-dispersive X-ray fluorescence analysis for unknown solid samples.Based on the conventional least-squares principle, this spectrum evaluation method is able to obtain the background-corrected and interference-free net peaks, which is significant for quantization analyses. A variety of analytical parameters and functions to describe the features of the fluorescence spectra of pure elements are used and established, such as the mass absorption coefficient, the Gi factor, and fundamental fluorescence formulas. The FSLS iterative program was compiled in the C language. The content of each component should reach the convergence criterion at the end of the calculations. After a basic theory analysis and experimental preparation, 13 national standard soil samples were detected using a spectrometer to test the feasibility of using the algorithm. The results show that the calculated contents of Ti, Fe, Ni, Cu, and Zn have the same changing tendency as the corresponding standard content in the 13 reference samples. Accuracies of 0.35% and 14.03% are obtained, respectively, for Fe and Ti, whose standard concentrations are 8.82% and 0.578%, respectively. However, the calculated results of trace elements (only tens of lg/g) deviate from the standard values. This may be because of measurement accuracy and mutual effects between the elements.展开更多
A global interpolating meshless shape function based on the generalized moving least-square （GMLS） is formulated by the transformation technique. Both the shape function and its derivatives meet the Kronecker delta ...A global interpolating meshless shape function based on the generalized moving least-square （GMLS） is formulated by the transformation technique. Both the shape function and its derivatives meet the Kronecker delta function property. With the interpolating GMLS （IGMLS） shape function, an improved element-free Galerkin （EFG） method is proposed for the structural dynamic analysis. Compared with the conven- tional EFG method, the obvious advantage of the proposed method is that the essential boundary conditions including both displacements and derivatives can be imposed by the straightforward way. Meanwhile, it can greatly improve the ill-condition feature of the standard GMLS approximation, and provide good accuracy at low cost. The dynamic analyses of the Euler beam and Kirchhoff plate are performed to demonstrate the feasi- bility and effectiveness of the improved method. The comparison between the numerical results of the conventional method and the improved method shows that the proposed method has better stability, higher accuracy, and less time consumption.展开更多
文摘The Galerkin and least-squares methods are two classes of the most popular Krylov subspace methOds for solving large linear systems of equations. Unfortunately, both the methods may suffer from serious breakdowns of the same type: In a breakdown situation the Galerkin method is unable to calculate an approximate solution, while the least-squares method, although does not really break down, is unsucessful in reducing the norm of its residual. In this paper we first establish a unified theorem which gives a relationship between breakdowns in the two methods. We further illustrate theoretically and experimentally that if the coefficient matrix of a lienar system is of high defectiveness with the associated eigenvalues less than 1, then the restarted Galerkin and least-squares methods will be in great risks of complete breakdowns. It appears that our findings may help to understand phenomena observed practically and to derive treatments for breakdowns of this type.
基金This project is supported by Research Foundation for Doctoral Program of Higher Education, China (No.98033532)
文摘The main purpose of reverse engineering is to convert discrete data pointsinto piecewise smooth, continuous surface models. Before carrying out model reconstruction it issignificant to extract geometric features because the quality of modeling greatly depends on therepresentation of features. Some fitting techniques of natural quadric surfaces with least-squaresmethod are described. And these techniques can be directly used to extract quadric surfaces featuresduring the process of segmentation for point cloud.
基金the National Science Council ot Taiwan,China for funding this research(Project no.:NSC 94-2218-E-035-011)
文摘A least-squares finite-element method （LSFEM） for the non-conservative shallow-water equations is presented. The model is capable of handling complex topography, steady and unsteady flows, subcritical and supercritical flows, and flows with smooth and sharp gradient changes. Advantages of the model include： （1） sources terms, such as the bottom slope, surface stresses and bed frictions, can be treated easily without any special treatment; （2） upwind scheme is no needed; （3） a single approximating space can be used for all variables, and its choice of approximating space is not subject to the Ladyzhenskaya-Babuska-Brezzi （LBB） condition; and （4） the resulting system of equations is symmetric and positive-definite （SPD） which can be solved efficiently with the preconditioned conjugate gradient method. The model is verified with flow over a bump, tide induced flow, and dam-break. Computed results are compared with analytic solutions or other numerical results, and show the model is conservative and accurate. The model is then used to simulate flow past a circular cylinder. Important flow charac-teristics, such as variation of water surface around the cylinder and vortex shedding behind the cylinder are investigated. Computed results compare well with experiment data and other numerical results.
基金the National Science Council of Taiwan for funding this research (NSC 96-2221-E-019-061).
文摘Numerical solution of shallow-water equations （SWE） has been a challenging task because of its nonlinear hyperbolic nature, admitting discontinuous solution, and the need to satisfy the C-property. The presence of source terms in momentum equations, such as the bottom slope and friction of bed, compounds the difficulties further. In this paper, a least-squares finite-element method for the space discretization and θ-method for the time integration is developed for the 2D non-conservative SWE including the source terms. Advantages of the method include： the source terms can be approximated easily with interpolation functions, no upwind scheme is needed, as well as the resulting system equations is symmetric and positive-definite, therefore, can be solved efficiently with the conjugate gradient method. The method is applied to steady and unsteady flows, subcritical and transcritical flow over a bump, 1D and 2D circular dam-break, wave past a circular cylinder, as well as wave past a hump. Computed results show good C-property, conservation property and compare well with exact solutions and other numerical results for flows with weak and mild gradient changes, but lead to inaccurate predictions for flows with strong gradient changes and discontinuities.
基金supported by the National Basic Research Program of China (2005CB321701)NSF of mathematics research special fund of Hebei Province(08M005)
文摘The purpose of this article is to develop and analyze least-squares approximations for the incompressible magnetohydrodynamic equations. The major advantage of the least-squares finite element method is that it is not subjected to the so-called Ladyzhenskaya-Babuska-Brezzi （LBB） condition. The authors employ least-squares functionals which involve a discrete inner product which is related to the inner product in H^-1（Ω）.
基金partially supported by the National Natural Science Foundation of China (No.41230318)
文摘With the development of computational power, there has been an increased focus on data-fitting related seismic inversion techniques for high fidelity seismic velocity model and image, such as full-waveform inversion and least squares migration. However, though more advanced than conventional methods, these data fitting methods can be very expensive in terms of computational cost. Recently, various techniques to optimize these data-fitting seismic inversion problems have been implemented to cater for the industrial need for much improved efficiency. In this study, we propose a general stochastic conjugate gradient method for these data-fitting related inverse problems. We first prescribe the basic theory of our method and then give synthetic examples. Our numerical experiments illustrate the potential of this method for large-size seismic inversion application.
基金supported by the National Natural Science Foundation of China(Nos.11702329,12102247)the Shanghai Key Lab of Vehicle Aerodynamics and Vehicle Thermal Management Systems,China(No.VATLAB-2021-01)。
文摘For the second-order finite volume method,implicit schemes and reconstruction methods are two main algorithms which influence the robustness and efficiency of the numerical simulations of compressible turbulent flows.In this paper,a compact least-squares reconstruction method is proposed to calculate the gradients for the distribution of flow field variables approximation.The compactness of the new reconstruction method is reflected in the gradient calculation process.The geometries of the face-neighboring elements are no longer utilized,and the weighted average values at the centroid of the interfaces are used to calculate the gradients instead of the values at the centroid of the face-neighboring elements.Meanwhile,an exact Jacobian solving strategy is developed for implicit temporal discretization.The accurate processing of Jacobian matrix can extensively improve the invertibility of the Jacobian matrix and avoid introducing extra numerical errors.In addition,a modified Venkatakrishnan limiter is applied to deal with the shock which may appear in transonic flows and the applicability of the mentioned methods is enhanced further.The combination of the proposed methods makes the numerical simulations of turbulent flow converge rapidly and steadily with an adaptive increasing CFL number.The numerical results of several benchmarks indicate that the proposed methods perform well in terms of robustness,efficiency and accuracy,and have good application potential in turbulent flow simulations of complex configurations.
基金Supported by "863" Program of P. R. China(2002AA2Z4291)
文摘Scientific forecasting water yield of mine is of great significance to the safety production of mine and the colligated using of water resources. The paper established the forecasting model for water yield of mine, combining neural network with the partial least square method. Dealt with independent variables by the partial least square method, it can not only solve the relationship between independent variables but also reduce the input dimensions in neural network model, and then use the neural network which can solve the non-linear problem better. The result of an example shows that the prediction has higher precision in forecasting and fitting.
文摘A least-squares mixed finite element (LSMFE) method for the numerical solution of fourth order parabolic problems analyzed and developed in this paper. The Ciarlet-Raviart mixed finite element space is used to approximate. The a posteriori error estimator which is needed in the adaptive refinement algorithm is proposed. The local evaluation of the least-squares functional serves as a posteriori error estimator. The posteriori errors are effectively estimated. The convergence of the adaptive least-squares mixed finite element method is proved.
文摘A least-squares mixed finite element method was formulated for a class of Stokes equations in two dimensional domains. The steady state and the time-dependent Stokes' equations were considered. For the stationary equation, optimal H-t and L-2-error estimates are derived under the standard regularity assumption on the finite element partition ( the LBB-condition is not required). Far the evolutionary equation, optimal L-2 estimates are derived under the conventional Raviart-Thomas spaces.
文摘In this paper, a least-squares finite element method for the upper-convected Maxell (UCM) fluid is proposed. We first linearize the constitutive and momentum equations and then apply a least-squares method to the linearized version of the viscoelastic UCM model. The L2 least-squares functional involves the residuals of each equation multiplied by proper weights. The corresponding homogeneous functional is equivalent to a natural norm. The error estimates of the finite element solution are analyzed when the conforming piecewise polynomial elements are used for the unknowns.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金This study was funded by the National Natural Science Foundation of China(Nos.11972077 and 12272039).
文摘In this paper,we present a novel initial costates solver for initializing time-optimal trajectory problems in relative motion with continuous low thrust.The proposed solver consists of two primary components:training a Multilayer Perceptron(MLP)for generating reference sequence and Time of Flight(TOF)to the target,and deriving a system of linear algebraic equations for obtaining the initial costates.To overcome the challenge of generating training samples for the MLP,the backward generation method is proposed to obtain five different training databases.The training database and sample form are determined by analyzing the input and output correlation using the Pearson correlation coefficient.The best-performing MLP is obtained by analyzing the training results with various hyper-parameter combinations.A reference sequence starting from the initial states is obtained by integrating forward with the near-optimal control vector from the output of MLP.Finally,a system of linear algebraic equations for estimating the initial costates is derived using the reference sequence and the necessary conditions for optimality.Simulation results demonstrate that the proposed initial costates solver improves the convergence ratio and reduce the function calls of the shooting function.Furthermore,Monte-Carlo simulation illustrates that the initial costates solver is applicable to different initial velocities,demonstrating excellent generalization ability.
基金partially supported by US NSF under Grant No.NSF-CNS-1066391and No.NSF-CNS-0914371,NSF-CPS-1135814 and NSF-CDI-1125165
文摘Many science and engineering applications involve solvinga linear least-squares system formed from some field measurements. In the distributed cyber-physical systems(CPS),each sensor node used for measurement often only knowspartial independent rows of the least-squares system. To solve the least-squares all the measurements must be gathered at a centralized location and then perform the computa-tion. Such data collection and computation are inefficient because of bandwidth and time constraints and sometimes areinfeasible because of data privacy concerns. Iterative methods are natural candidates for solving the aforementionedproblem and there are many studies regarding this. However,most of the proposed solutions are related to centralized/parallel computations while only a few have the potential to beapplied in distributed networks. Thus distributed computations are strongly preferred or demanded in many of the realworld applications, e.g. smart-grid, target tracking, etc. Thispaper surveys the representative iterative methods for distributed least-squares in networks.
文摘Background:This article investigates the Least-Squares Monte Carlo Method by using different polynomial basis in American Asian Options pricing.The standard approach in the option pricing literature is to choose the basis arbitrarily.By comparing four different polynomial basis we show that the choice of basis interferes in the option's price.Methods:We assess Least-Squares Method performance in pricing four different American Asian Options by using four polynomial basis:Power,Laguerre,Legendre and Hermite A.To every American Asian Option priced,three sets of parameters are used in order to evaluate it properly.Results:We show that the choice of the basis interferes in the option's price by showing that one of them converges to the option's value faster than any other by using fewer simulated paths.In the case of an Amerasian call option,for example,we find that the preferable polynomial basis is Hermite A.For an Amerasian put option,the Power polynomial basis is recommended.Such empirical outcome is theoretically unpredictable,since in principle all basis can be indistinctly used when pricing the derivative.Conclusion:In this article The Least-Squares Monte Carlo Method performance is assessed in pricing four different types of American Asian Options by using four different polynomial basis through three different sets of parameters.Our results suggest that one polynomial basis is best suited to perform the method when pricing an American Asian option.Theoretically all basis can be indistinctly used when pricing the derivative.However,our results does not confirm these.We find that when pricing an American Asian put option,Power A is better than the other basis we have studied here whereas when pricing an American Asian call,Hermite A is better.
文摘This article explores the comparison between the probability method and the least squares method in the design of linear predictive models. It points out that these two approaches have distinct theoretical foundations and can lead to varied or similar results in terms of precision and performance under certain assumptions. The article underlines the importance of comparing these two approaches to choose the one best suited to the context, available data and modeling objectives.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Key R&D Project of China(No.2017YFC0602100)the National Natural Science Foundation of China(No.41774147)Sichuan Science and Technology Support Program(No.2015GZ0272)
文摘The full-spectrum least-squares(FSLS) method is introduced to perform quantitative energy-dispersive X-ray fluorescence analysis for unknown solid samples.Based on the conventional least-squares principle, this spectrum evaluation method is able to obtain the background-corrected and interference-free net peaks, which is significant for quantization analyses. A variety of analytical parameters and functions to describe the features of the fluorescence spectra of pure elements are used and established, such as the mass absorption coefficient, the Gi factor, and fundamental fluorescence formulas. The FSLS iterative program was compiled in the C language. The content of each component should reach the convergence criterion at the end of the calculations. After a basic theory analysis and experimental preparation, 13 national standard soil samples were detected using a spectrometer to test the feasibility of using the algorithm. The results show that the calculated contents of Ti, Fe, Ni, Cu, and Zn have the same changing tendency as the corresponding standard content in the 13 reference samples. Accuracies of 0.35% and 14.03% are obtained, respectively, for Fe and Ti, whose standard concentrations are 8.82% and 0.578%, respectively. However, the calculated results of trace elements (only tens of lg/g) deviate from the standard values. This may be because of measurement accuracy and mutual effects between the elements.
基金Project supported by the National Natural Science Foundation of China(No.11176035)
文摘A global interpolating meshless shape function based on the generalized moving least-square （GMLS） is formulated by the transformation technique. Both the shape function and its derivatives meet the Kronecker delta function property. With the interpolating GMLS （IGMLS） shape function, an improved element-free Galerkin （EFG） method is proposed for the structural dynamic analysis. Compared with the conven- tional EFG method, the obvious advantage of the proposed method is that the essential boundary conditions including both displacements and derivatives can be imposed by the straightforward way. Meanwhile, it can greatly improve the ill-condition feature of the standard GMLS approximation, and provide good accuracy at low cost. The dynamic analyses of the Euler beam and Kirchhoff plate are performed to demonstrate the feasi- bility and effectiveness of the improved method. The comparison between the numerical results of the conventional method and the improved method shows that the proposed method has better stability, higher accuracy, and less time consumption.
