It is well known that the overbreak caused by the blasting damage during tunnel excavation increases costs associated with filling the collapsed area with shotcrete and results in filing of a claim by the contractor. ...It is well known that the overbreak caused by the blasting damage during tunnel excavation increases costs associated with filling the collapsed area with shotcrete and results in filing of a claim by the contractor. This paper outlines a new approach for prediction the overbreak depth during tunnel construction. Hence, firstly excavation damage zone(EDZ) are determined by average specific charge in each zone. Numerical modelling is used to simulate the EDZ around tunnel boundary and the overbreak depth are calculated by the rock strength factor. The predicted overbreak depth compared with observed field data from a case study. The results show that there exists an approximately up to 40% difference between the prediction and the observed volume of overbreak depth. Therefore, the method can be well used to predict the overbreak depth to estimate more precision of shotcrete and concrete volumes in tunnelling cost during design phase.展开更多
To estimate the near-fault inelastic response spectra, the accuracy of six existing strength reduction factors （R） proposed by different investigators were evaluated by using a suite of near-fault earthquake records...To estimate the near-fault inelastic response spectra, the accuracy of six existing strength reduction factors （R） proposed by different investigators were evaluated by using a suite of near-fault earthquake records with directivity-induced pulses. In the evaluation, the force-deformation relationship is modelled by elastic-perfectly plastic, bilinear and stiffness degrading models, and two site conditions, rock and soil, are considered. The R-value ratio （ratio of the R value obtained from the existing R-expressions （or the R-p-T relationships） to that from inelastic analyses） is used as a measurement parameter. Results show that the R-expressions proposed by Ordaz ＆ Perez-Rocha are the most suitable for near-fault ground motions, followed by the Newmark ＆ Hall and the Berrill et al. relationships. Based on an analysis using the near-fault ground motion dataset, new expressions of R that consider the effects of site conditions are presented and verified.展开更多
The strength reduction factors are not only the key factors in determining seismic action for force-based seismic design, but also the key parameters to derive the inelastic response spectra for performance-based seis...The strength reduction factors are not only the key factors in determining seismic action for force-based seismic design, but also the key parameters to derive the inelastic response spectra for performance-based seismic design. In this paper, with a high quality ground motion database that includes a reasonable-sized set of records from China, a statistical study on the strength reduction factors is conducted and a new expression of strength reduction factors involving classification of design earthquake, which is an important concept to determine design spectra in Chinese seismic design code, is proposed. The expression of strength reduction factors can reflect the ground motion characteristics of China to a certain extent and is particularly suitable for Chinese seismic design. Then, the influence effects of site condition, classification of design earthquake, period of vibration, ductility level, earthquake magnitude and distance to fault on strength reduction factors are investigated. It is concluded that the effect of site condition on the strength reduction factors cannot be neglected, especially for the short-period structures of higher ductility. The classification of design earthquake also has an important effect on strength reduction factors and it may be unsuitable to use the existing expressions of strength reduction factors to the design spectra of current Chinese seismic code. The earthquake magnitude has no practical effect on strength reduction factors and if the near-fault records with forward directivity effect are not taken into consideration, the effect of distance to fault on strength reduction factors can also be neglected.展开更多
Sinter body strength, which reflects the strength of sinter, plays an important role in the improvement of sinter. In this study, the sinter body strengths of iron ores were measured using a microsintering method. The...Sinter body strength, which reflects the strength of sinter, plays an important role in the improvement of sinter. In this study, the sinter body strengths of iron ores were measured using a microsintering method. The relationship between the chemical composition and sinter body strength was discussed. Moreover, sinter-pot tests were performed. The effects of sinter body strength on the sintering indexes were then elucidated, and the bottom limit of sinter body strength of blending ores was confirmed. In the results, the compressive strengths（CSs） of iron ores are observed to decrease with the increasing of the contents of loss on ignition（LOI）, SiO 2, and Al2O3; however, LOI of less than 3wt% does not substantially influence the CSs of fine ores. In the case of similar mineral composition, the porosity, in particular, the ratio between the number of large pores and the total number of pores, strongly influences the sinter body strength. With an increase of the blending-ore CSs used in sinter-pot tests, the yield, productivity, and tumbler strength increase, and the solid fuel consumption decreases. The CSs of the blending ores only slightly affect the sintering time. The CS bottom limit of the blending ores is 310 N. When the CSs of the blending ores increase by 10%, the yield, productivity, and tumbler index increase by 1.9%, 2.8%, and 2.0%, respectively, and the solid fuel consumption decreases by 1.9%.展开更多
Framed structures are usually infilled with masonry walls. They may cause a significant increase in both stiffness and strength, reducing the deformation demand and increasing the energy dissipation capacity of the sy...Framed structures are usually infilled with masonry walls. They may cause a significant increase in both stiffness and strength, reducing the deformation demand and increasing the energy dissipation capacity of the system. On the other hand, irregular arrangements of the masonry panels may lead to the concentration of damage in some regions, with negative effects; for example soft story mechanisms and shear failures in short columns. Therefore, the presence ofinfill walls should not be neglected, especially in regions of moderate and high seismicity. To this aim, simple models are available for solid infills walls, such as the diagonal no-tension strut model, while infilled frames with openings have not been adequately investigated. In this study, the effect of openings on the strength and stiffness of infilled frames is investigated by means of about 150 experimental and numerical tests. The main parameters involved are identified and a simple model to take into account the openings in the infills is developed and compared with other models proposed by different researchers. The model, which is based on the use of strength and stiffness reduction factors, takes into account the opening dimensions and presence of reinforcing elements around the opening. An example of an application of the proposed reduction factors is also presented.展开更多
The undrained shear strength （su） of fine-grained soils that can be measured in situ and in laboratory isone of the key geotechnical parameters. The unconfined compression test （UCT） is widely used in laboratoryto...The undrained shear strength （su） of fine-grained soils that can be measured in situ and in laboratory isone of the key geotechnical parameters. The unconfined compression test （UCT） is widely used in laboratoryto measure this parameter due to its simplicity; however, it is severely affected by sampledisturbance. The vane shear test （VST） technique that is less sensitive to sample disturbance involves acorrection factor against the soil plasticity, commonly known as the Bjerrum＇s correction factor, m. Thisstudy aims to reevaluate the Bjerrum＇s correction factor in consideration of a different approach and arelatively new method of testing. Atterberg limits test, miniature VST, and reverse extrusion test （RET）were conducted on 120 remolded samples. The effect of soil plasticity on undrained shear strength wasexamined using the liquidity index instead of Bjerrum＇s correction factor. In comparison with the resultobatined using the Bjerrum＇s correction factor, the undrained shear strength was better representedwhen su values were correlated with the liquidity index. The results were validated by the RET, whichwas proven to take into account soil plasticity with a reliable degree of accuracy. This study also showsthat the RET has strong promise as a new tool for testing undrained shear strength of fine-grained soils.展开更多
Residual fatigue strength of 48MnV crankshaft was studied and analyzed based on safety factor. Three different status crankshafts were used to the hop-up tests, which maintain new after 500h hop-up tests and after 1...Residual fatigue strength of 48MnV crankshaft was studied and analyzed based on safety factor. Three different status crankshafts were used to the hop-up tests, which maintain new after 500h hop-up tests and after 1000h hop-up tests. Then, crankshafts were cut into unit cranks. The unit cranks were used to do endurance bending tests to get the residual fatigue strength. Finally, the results were analyzed based on safety factor. The results show that safety factor of crankshaft descends a little with the increase of the running time, and the residual safety factor is still much bigger than the endurable safety factor. Furthermore, after the crankshaft accomplishes a full life cycle, the residual fatigue strength of the crankshaft is enough to remanufacture and fulfill the next life cycle.展开更多
It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performan...It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades. However, no investigation has yet been carried out for the case of soil-structure systems. In the present study, through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns, including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils, the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated. The results of this study show that depending on the level of inelasticity, soil flexibility and number of degrees-of-freedoms (DOFs), structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems. It is also found that at high levels of inelasticity, the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.展开更多
When the slope is in critical limit equilibrium(LE) state, the strength parameters have different contribution to each other on maintaining slope stability. That is to say that the strength parameters are not simultan...When the slope is in critical limit equilibrium(LE) state, the strength parameters have different contribution to each other on maintaining slope stability. That is to say that the strength parameters are not simultaneously reduced. Hence, the LE stress method is established to analyze the slope stability by employing the double strengthreduction(DSR) technique in this work. For calculation model of slope stability under the DSR technique, the general nonlinear Mohr–Coulomb(M–C) criterion is used to describe the shear failure of slope. Meanwhile, the average and polar diameter methods via the DSR technique are both adopted to calculate the comprehensive factor of safety(FOS) of slope. To extend the application of the polar diameter method, the original method is improved in the proposed method. After comparison and analysis on some slope examples, the proposed method's feasibility is verified. Thereafter, the stability charts of slope suitable for engineering application are drawn. Moreover, the studies show that:(1) the average method yields similar results as that of the polardiameter method;(2) compared with the traditional uniform strength-reduction(USR) technique, the slope stability obtained using the DSR techniquetends to be more unsafe; and(3) for a slope in the critical LE state, the strength parameter φ, i.e., internal friction angle, has greater contribution on the slope stability than the strength parameters c, i.e., cohesion.展开更多
Lime-fly ash loess is composed of fly ash, lime and loess. It is a new material in subgrade backfill. Main factors to influence the strength of lime-fly ash loess are age, amount of fly ash and lime, ratio of fly ash ...Lime-fly ash loess is composed of fly ash, lime and loess. It is a new material in subgrade backfill. Main factors to influence the strength of lime-fly ash loess are age, amount of fly ash and lime, ratio of fly ash to lime (1:K), and moisture content. In order to observe the effect of each factor influencing the strength of lime-fly ash loess and find out the relationship between each other, this paper adopted orthogonal test design to conduct unconfined compression tests. The result shows that 90d strength can be considered to calculate the strength of lime-fly ash loess in practice. And the most important factor to influence the 90d strength of lime-fly ash loess is the amount of fly ash and lime, the second is moisture content, and then is the ratio of fly ash to lime (1:K). These achievements are significant to the design and application of lime-fly ash loess in subgrade construction of loess areas.展开更多
Experimental and analytical investigations on the residual strength of the stiffened LY12CZ aluminum alloy panels with widespread fatigue damage （WFD） are conducted. Nine stiffened LY12CZ aluminum alloy panels with ...Experimental and analytical investigations on the residual strength of the stiffened LY12CZ aluminum alloy panels with widespread fatigue damage （WFD） are conducted. Nine stiffened LY12CZ aluminum alloy panels with three different types of damage are tested for residual strength. Each specimen is pre-cracked at rivet holes by saw cuts and subjected to a monotonically increasing tensile load until failure is occurred and the failure load is recorded. The stress intensity factors at the tips of the lead crack and the adjacent WFD cracks of the stiffened aluminum alloy panels are calculated by compounding approach and finite element method （FEM） respectively. The residual strength of the stiffened panels with WFD is evaluated by the engineering method with plastic zone linkup criterion and the FEM with apparent fracture toughness criterion respectively. The predicted residual strength agrees well with the experiment results. It indicates that in engineering practice these methods can be used for residual strength evaluation with the acceptable accuracy. It can be seen from this research that WFD can significantly reduce the residual strength and the critical crack length of the stiffened panels with WFD. The effect of WFD crack length on residual strength is also studied.展开更多
反应堆一回路中部分管道长期承受冷热流体的交替冲刷,局部可能出现的热分层现象使管道中的热应力进一步加大,由此产生的应力集中及疲劳问题可能危害反应堆的安全运行。基于热流固多物理场耦合方法结合ASME(American Society of Mechanic...反应堆一回路中部分管道长期承受冷热流体的交替冲刷,局部可能出现的热分层现象使管道中的热应力进一步加大,由此产生的应力集中及疲劳问题可能危害反应堆的安全运行。基于热流固多物理场耦合方法结合ASME(American Society of Mechanical Engineers)规范中适用于核一级承压设备的相关标准和分析流程,对某型号反应堆的管道系统开展了结构强度校核及疲劳分析,数值结果表明:当前工况参数及出现次数叠加作用下管道系统的应力分类结果满足规范要求,不会出现不可逆的结构损伤,且关键结构不连续位置的疲劳累积使用因子均小于1,未出现累积使用因子超限问题。展开更多
文摘It is well known that the overbreak caused by the blasting damage during tunnel excavation increases costs associated with filling the collapsed area with shotcrete and results in filing of a claim by the contractor. This paper outlines a new approach for prediction the overbreak depth during tunnel construction. Hence, firstly excavation damage zone(EDZ) are determined by average specific charge in each zone. Numerical modelling is used to simulate the EDZ around tunnel boundary and the overbreak depth are calculated by the rock strength factor. The predicted overbreak depth compared with observed field data from a case study. The results show that there exists an approximately up to 40% difference between the prediction and the observed volume of overbreak depth. Therefore, the method can be well used to predict the overbreak depth to estimate more precision of shotcrete and concrete volumes in tunnelling cost during design phase.
基金Foundation for Research and Science and Technology of New Zealand, Contract Number: C05X0208 and C05X0301the Foundation for Western Transportation Science and Technology Research, Contract No. 200831800098
文摘To estimate the near-fault inelastic response spectra, the accuracy of six existing strength reduction factors （R） proposed by different investigators were evaluated by using a suite of near-fault earthquake records with directivity-induced pulses. In the evaluation, the force-deformation relationship is modelled by elastic-perfectly plastic, bilinear and stiffness degrading models, and two site conditions, rock and soil, are considered. The R-value ratio （ratio of the R value obtained from the existing R-expressions （or the R-p-T relationships） to that from inelastic analyses） is used as a measurement parameter. Results show that the R-expressions proposed by Ordaz ＆ Perez-Rocha are the most suitable for near-fault ground motions, followed by the Newmark ＆ Hall and the Berrill et al. relationships. Based on an analysis using the near-fault ground motion dataset, new expressions of R that consider the effects of site conditions are presented and verified.
基金National Natural Science Foundation of China (50538050), Science Foundation of Heilongjiang Province (ZJG03-03)
文摘The strength reduction factors are not only the key factors in determining seismic action for force-based seismic design, but also the key parameters to derive the inelastic response spectra for performance-based seismic design. In this paper, with a high quality ground motion database that includes a reasonable-sized set of records from China, a statistical study on the strength reduction factors is conducted and a new expression of strength reduction factors involving classification of design earthquake, which is an important concept to determine design spectra in Chinese seismic design code, is proposed. The expression of strength reduction factors can reflect the ground motion characteristics of China to a certain extent and is particularly suitable for Chinese seismic design. Then, the influence effects of site condition, classification of design earthquake, period of vibration, ductility level, earthquake magnitude and distance to fault on strength reduction factors are investigated. It is concluded that the effect of site condition on the strength reduction factors cannot be neglected, especially for the short-period structures of higher ductility. The classification of design earthquake also has an important effect on strength reduction factors and it may be unsuitable to use the existing expressions of strength reduction factors to the design spectra of current Chinese seismic code. The earthquake magnitude has no practical effect on strength reduction factors and if the near-fault records with forward directivity effect are not taken into consideration, the effect of distance to fault on strength reduction factors can also be neglected.
基金financially supported by the Fundamental Research Funds for the Central Universities of China (No. FRF-IC-14-006)
文摘Sinter body strength, which reflects the strength of sinter, plays an important role in the improvement of sinter. In this study, the sinter body strengths of iron ores were measured using a microsintering method. The relationship between the chemical composition and sinter body strength was discussed. Moreover, sinter-pot tests were performed. The effects of sinter body strength on the sintering indexes were then elucidated, and the bottom limit of sinter body strength of blending ores was confirmed. In the results, the compressive strengths（CSs） of iron ores are observed to decrease with the increasing of the contents of loss on ignition（LOI）, SiO 2, and Al2O3; however, LOI of less than 3wt% does not substantially influence the CSs of fine ores. In the case of similar mineral composition, the porosity, in particular, the ratio between the number of large pores and the total number of pores, strongly influences the sinter body strength. With an increase of the blending-ore CSs used in sinter-pot tests, the yield, productivity, and tumbler strength increase, and the solid fuel consumption decreases. The CSs of the blending ores only slightly affect the sintering time. The CS bottom limit of the blending ores is 310 N. When the CSs of the blending ores increase by 10%, the yield, productivity, and tumbler index increase by 1.9%, 2.8%, and 2.0%, respectively, and the solid fuel consumption decreases by 1.9%.
基金The financial support of the Ministry of the Instruction, University and Research of Italy (MIUR)
文摘Framed structures are usually infilled with masonry walls. They may cause a significant increase in both stiffness and strength, reducing the deformation demand and increasing the energy dissipation capacity of the system. On the other hand, irregular arrangements of the masonry panels may lead to the concentration of damage in some regions, with negative effects; for example soft story mechanisms and shear failures in short columns. Therefore, the presence ofinfill walls should not be neglected, especially in regions of moderate and high seismicity. To this aim, simple models are available for solid infills walls, such as the diagonal no-tension strut model, while infilled frames with openings have not been adequately investigated. In this study, the effect of openings on the strength and stiffness of infilled frames is investigated by means of about 150 experimental and numerical tests. The main parameters involved are identified and a simple model to take into account the openings in the infills is developed and compared with other models proposed by different researchers. The model, which is based on the use of strength and stiffness reduction factors, takes into account the opening dimensions and presence of reinforcing elements around the opening. An example of an application of the proposed reduction factors is also presented.
文摘The undrained shear strength （su） of fine-grained soils that can be measured in situ and in laboratory isone of the key geotechnical parameters. The unconfined compression test （UCT） is widely used in laboratoryto measure this parameter due to its simplicity; however, it is severely affected by sampledisturbance. The vane shear test （VST） technique that is less sensitive to sample disturbance involves acorrection factor against the soil plasticity, commonly known as the Bjerrum＇s correction factor, m. Thisstudy aims to reevaluate the Bjerrum＇s correction factor in consideration of a different approach and arelatively new method of testing. Atterberg limits test, miniature VST, and reverse extrusion test （RET）were conducted on 120 remolded samples. The effect of soil plasticity on undrained shear strength wasexamined using the liquidity index instead of Bjerrum＇s correction factor. In comparison with the resultobatined using the Bjerrum＇s correction factor, the undrained shear strength was better representedwhen su values were correlated with the liquidity index. The results were validated by the RET, whichwas proven to take into account soil plasticity with a reliable degree of accuracy. This study also showsthat the RET has strong promise as a new tool for testing undrained shear strength of fine-grained soils.
文摘Residual fatigue strength of 48MnV crankshaft was studied and analyzed based on safety factor. Three different status crankshafts were used to the hop-up tests, which maintain new after 500h hop-up tests and after 1000h hop-up tests. Then, crankshafts were cut into unit cranks. The unit cranks were used to do endurance bending tests to get the residual fatigue strength. Finally, the results were analyzed based on safety factor. The results show that safety factor of crankshaft descends a little with the increase of the running time, and the residual safety factor is still much bigger than the endurable safety factor. Furthermore, after the crankshaft accomplishes a full life cycle, the residual fatigue strength of the crankshaft is enough to remanufacture and fulfill the next life cycle.
文摘It is known that structural stiffness and strength distributions have an important role in the seismic response of buildings. The effect of using different code-specified lateral load patterns on the seismic performance of fixed-base buildings has been investigated by researchers during the past two decades. However, no investigation has yet been carried out for the case of soil-structure systems. In the present study, through intensive parametric analyses of 21,600 linear and nonlinear MDOF systems and considering five different shear strength and stiffness distribution patterns, including three code-specified patterns as well as uniform and concentric patterns subjected to a group of earthquakes recorded on alluvium and soft soils, the effect of structural characteristics distribution on the strength demand and ductility reduction factor of MDOF fixed-base and soil-structure systems are parametrically investigated. The results of this study show that depending on the level of inelasticity, soil flexibility and number of degrees-of-freedoms (DOFs), structural characteristics distribution can significantly affect the strength demand and ductility reduction factor of MDOF systems. It is also found that at high levels of inelasticity, the ductility reduction factor of low-rise MDOF soil-structure systems could be significantly less than that of fixed-base structures and the reduction is less pronounced as the number of stories increases.
基金funded by the National Natural Science Foundation of China (Grant No. 51608541)the Postdoctoral Science Foundation of China (Grant No. 2015M580702)the Guizhou Provincial Department of Transportation of China (Grant No. 2014122006)
文摘When the slope is in critical limit equilibrium(LE) state, the strength parameters have different contribution to each other on maintaining slope stability. That is to say that the strength parameters are not simultaneously reduced. Hence, the LE stress method is established to analyze the slope stability by employing the double strengthreduction(DSR) technique in this work. For calculation model of slope stability under the DSR technique, the general nonlinear Mohr–Coulomb(M–C) criterion is used to describe the shear failure of slope. Meanwhile, the average and polar diameter methods via the DSR technique are both adopted to calculate the comprehensive factor of safety(FOS) of slope. To extend the application of the polar diameter method, the original method is improved in the proposed method. After comparison and analysis on some slope examples, the proposed method's feasibility is verified. Thereafter, the stability charts of slope suitable for engineering application are drawn. Moreover, the studies show that:(1) the average method yields similar results as that of the polardiameter method;(2) compared with the traditional uniform strength-reduction(USR) technique, the slope stability obtained using the DSR techniquetends to be more unsafe; and(3) for a slope in the critical LE state, the strength parameter φ, i.e., internal friction angle, has greater contribution on the slope stability than the strength parameters c, i.e., cohesion.
文摘Lime-fly ash loess is composed of fly ash, lime and loess. It is a new material in subgrade backfill. Main factors to influence the strength of lime-fly ash loess are age, amount of fly ash and lime, ratio of fly ash to lime (1:K), and moisture content. In order to observe the effect of each factor influencing the strength of lime-fly ash loess and find out the relationship between each other, this paper adopted orthogonal test design to conduct unconfined compression tests. The result shows that 90d strength can be considered to calculate the strength of lime-fly ash loess in practice. And the most important factor to influence the 90d strength of lime-fly ash loess is the amount of fly ash and lime, the second is moisture content, and then is the ratio of fly ash to lime (1:K). These achievements are significant to the design and application of lime-fly ash loess in subgrade construction of loess areas.
文摘Experimental and analytical investigations on the residual strength of the stiffened LY12CZ aluminum alloy panels with widespread fatigue damage （WFD） are conducted. Nine stiffened LY12CZ aluminum alloy panels with three different types of damage are tested for residual strength. Each specimen is pre-cracked at rivet holes by saw cuts and subjected to a monotonically increasing tensile load until failure is occurred and the failure load is recorded. The stress intensity factors at the tips of the lead crack and the adjacent WFD cracks of the stiffened aluminum alloy panels are calculated by compounding approach and finite element method （FEM） respectively. The residual strength of the stiffened panels with WFD is evaluated by the engineering method with plastic zone linkup criterion and the FEM with apparent fracture toughness criterion respectively. The predicted residual strength agrees well with the experiment results. It indicates that in engineering practice these methods can be used for residual strength evaluation with the acceptable accuracy. It can be seen from this research that WFD can significantly reduce the residual strength and the critical crack length of the stiffened panels with WFD. The effect of WFD crack length on residual strength is also studied.
文摘反应堆一回路中部分管道长期承受冷热流体的交替冲刷,局部可能出现的热分层现象使管道中的热应力进一步加大,由此产生的应力集中及疲劳问题可能危害反应堆的安全运行。基于热流固多物理场耦合方法结合ASME(American Society of Mechanical Engineers)规范中适用于核一级承压设备的相关标准和分析流程,对某型号反应堆的管道系统开展了结构强度校核及疲劳分析,数值结果表明:当前工况参数及出现次数叠加作用下管道系统的应力分类结果满足规范要求,不会出现不可逆的结构损伤,且关键结构不连续位置的疲劳累积使用因子均小于1,未出现累积使用因子超限问题。
