In this study,the hydraulic behavior and sand transport efficiency of the siphon automatic sand discharge device were studied by software simulation tests.By simulating the actual situation,this study analyzed how fac...In this study,the hydraulic behavior and sand transport efficiency of the siphon automatic sand discharge device were studied by software simulation tests.By simulating the actual situation,this study analyzed how factors such as the difference in water level,sediment concentration,and pipeline layout affected the sediment discharge effect.The results show that the sediment discharge device can effectively discharge sediment under diverse operating conditions and show adaptability to different environmental conditions,which indicates that it is suitable for various types of reservoir environments.展开更多
The hybrid CO_(2) thermal technique has achieved considerable success globally in extracting residual heavy oil from reserves following a long-term steam stimulation process.Using microscopic visualization experiments...The hybrid CO_(2) thermal technique has achieved considerable success globally in extracting residual heavy oil from reserves following a long-term steam stimulation process.Using microscopic visualization experiments and molecular dynamics(MD)simulations,this study investigates the microscopic enhanced oil recovery(EOR)mechanisms underlying residual oil removal using hybrid CO_(2) thermal systems.Based on the experimental models for the occurrence of heavy oil,this study evaluates the performance of hybrid CO_(2) thermal systems under various conditions using MD simulations.The results demonstrate that introducing CO_(2) molecules into heavy oil can effectively penetrate and decompose dense aggregates that are originally formed on hydrophobic surfaces.A stable miscible hybrid CO_(2) thermal system,with a high effective distribution ratio of CO_(2),proficiently reduces the interaction energies between heavy oil and rock surfaces,as well as within heavy oil.A visualization analysis of the interactions reveals that strong van der Waals(vdW)attractions occur between CO_(2) and heavy oil molecules,effectively promoting the decomposition and swelling of heavy oil.This unlocks the residual oil on the hydrophobic surfaces.Considering the impacts of temperature and CO_(2) concentration,an optimal gas-to-steam injection ratio(here,the CO_(2):steam ratio)ranging between 1:6 and 1:9 is recommended.This study examines the microscopic mechanisms underlying the hybrid CO_(2) thermal technique at a molecular scale,providing a significant theoretical guide for its expanded application in EOR.展开更多
With the increasing development of deepburied engineering projects,rockburst disasters have become a frequent concern.Studies have indicated that tunnel diameter is a critical factor influencing the occurrence of rock...With the increasing development of deepburied engineering projects,rockburst disasters have become a frequent concern.Studies have indicated that tunnel diameter is a critical factor influencing the occurrence of rockbursts.To investigate the influence of tunnel diameter on the deformation and failure characteristics of surrounding rock,large-sized rocklike gypsum specimens were tested using a selfdeveloped true triaxial rockburst loading system containing circular tunnels with three different diameters(D=0.07 m,0.11 m,and 0.15 m).Acoustic emission monitoring,together with a miniature intelligent camera,was employed to analyze the entire process,focusing on macroscopic failure patterns,fragment characteristics,and underlying failure mechanisms.In addition,theoretical analyses were carried out and combined with numerical simulations to investigate the differences in energy evolution associated with rockburst physical models.The results indicate that:(1)The rockburst process with different tunnel diameters consistently evolved through three distinct stages—initial particle ejection,crack propagation accompanied by flake spalling,and,finally,fragment ejection leading to the formation of a‘V'-shaped notch.(2)Increasing tunnel diameter reduces rockburst failure load while increasing surrounding rock damage extent,total mass and average size of ejected fragments.Additionally,shear failure proportion decreases with tensile failure becoming increasingly dominant.(3)Larger tunnel diameters reduce the attenuation rate of elastic strain energy,thereby expanding the zone of elastic strain energy accumulation and disturbance and creating conditions for larger volume rockburst.(4)Larger tunnel diameters result in a smaller principal stress ratio at equivalent distances in the surrounding rock,indicating a higher likelihood of tensile failure.(5)Numerical analyses further reveal that larger tunnel diameters reduce the maximum elastic strain energy density around the tunnel,lowering the energy released per unit volume of rockburst fragments and their ejection velocities.However,both the total failure volume and overall energy release from rockburst increase.Model experiments with different tunnel diameters are of great significance for optimizing engineering design and parameter selection,as well as guiding tunnel construction under complex geological conditions.展开更多
Materials that are difficult to cut,such as titanium alloys,are widely used in large load-bearing integral components of aircraft,leading to great challenges for manufacturing.Electrochemical milling is a way for mach...Materials that are difficult to cut,such as titanium alloys,are widely used in large load-bearing integral components of aircraft,leading to great challenges for manufacturing.Electrochemical milling is a way for machining difficult-to-cut materials through Computer Numerical Control(CNC)trajectory motion.Using a tilted large cathode machining surface and the cut-in feed mode,an efficient and low-cost method is obtained for machining the large integral components.A novel crossed and inclined structure of the flow mode is designed to realize electrochemical milling with a large tilted cathode surface.Compared to the vertical flow mode with one inlet,the proposed flow mode has two inlets that independently supply electrolytes,and the inclined channels make the flow field more stable.Flow field simulations are performed for both the vertical and proposed flow modes.The results show that the proposed flow mode avoids the random diversion of electrolytes and the ultralow flow velocity at both ends of the nozzle area,improving the velocity,uniformity,and stability of the electrolytes.The inclination angle of the crossed and inclined flow field is optimized.Finally,limit feed rate experiments are conducted in two modes,and the limit feed rate is 70 mm/min in the proposed mode.A sector workpiece of a large circular surface with approximately 8.77 mm thickness is machined 9 times by the cut-in electrochemical milling,the material removal rate is 4872 mm^(3)/min,and the surface roughness is superior to 1.15μm.展开更多
Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical cha...Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical charges on the tunnel blast wave loads and to develop a quantitative calculation method, this study carried out experimental and numerical research. Initially, external explosion experiments were conducted using both 35 kg spherical charges and cylindrical charges with aspect ratio of 4.8 at two different distances from the tunnel entrance. Comparative analysis of the blast wave parameters in the tunnel revealed that the explosive equivalent of the cylindrical charges was significantly higher than that of the spherical charges. To address this, an equivalent coefficient κ based on the spherical charges was proposed for the cylindrical charges. Subsequently, numerical simulations were conducted for the experimental conditions, and the numerical simulation results match the experiments well. Through numerical calculations, the reliability of the equivalent coefficient κ under the experimental conditions was verified, and comparison analysis indicated that the explosion energy of cylindrical charges spreads more radially, resulting in more explosion energy entering the tunnel, which is the fundamental reason for the increase in tunnel blast wave loads. Additionally, analyzing the explosion energy ratio entering the tunnel is an effective method for calculating the equivalent coefficient κ. Finally, through more than one hundred sets of numerical calculation results, the impact of the proportional distance λ and the ratio of charge mass to the tunnel cross-section dimension φ on the equivalence coefficients κ was investigated. An empirical formula for the equivalence coefficient κ was derived through fitting, and the accuracy of the formula was validated through literature experimental results. The research findings of this paper will provide valuable guidance for the calculation of blast wave loads in tunnel.展开更多
Sloshing experiment is crucial to determine the reaction performance of regeneration columns on an offshore floating platform.A novel type of column motion simulating device and a Marine Predator Algorithm-based Slidi...Sloshing experiment is crucial to determine the reaction performance of regeneration columns on an offshore floating platform.A novel type of column motion simulating device and a Marine Predator Algorithm-based Sliding Mode Controller(MPA-SMC)are proposed for such sloshing experiments.The simulator consists of a Stewart platform and a steel framework.The Stewart platform is located at the column's center of gravity(CoG)and supported by the steel framework.The platform's hydraulic servo system is controlled by a sliding mode controller with parameters optimized by MPA to improve robustness and precision.A numerical sloshing experiment is conducted using the proposed device and controller.The results show that the novel motion simulator has lower torque during the column sloshes,and the proposed controller performs better than a well-tuned PID controller in terms of target tracking precision and anti-interference capability.展开更多
This study aims to elucidate the dynamic evolution mechanism of the fracturing fracture system during the exploration and development of complex oil and gas reservoirs.By integrating methods of rock mechanical testing...This study aims to elucidate the dynamic evolution mechanism of the fracturing fracture system during the exploration and development of complex oil and gas reservoirs.By integrating methods of rock mechanical testing,logging calculation,and seismic inversion technology,we obtained the current insitu stress characteristics of a single well and rock mechanical parameters.Simultaneously,significant controlling factors of rock mechanical properties were analyzed.Subsequently,by coupling hydraulic fracturing physical experiments with finite element numerical simulation,three different fracturing models were configured:single-cluster,double-cluster,and triple-cluster perforations.Combined with acoustic emission technology,the fracture initiation mode and evolution characteristics during the loading process were determined.The results indicate the following findings:(1)The extension direction and length of the fracture are significantly controlled by the direction of the maximum horizontal principal stress.(2)Areas with poor cementation and compactness exhibit complex fracture morphology,prone to generating network fractures.(3)The interlayer development of fracturing fractures is controlled by the strata occurrence.(4)Increasing the displacement of fracturing fluid enlarges the fracturing fracture length and height.This research provides theoretical support and effective guidance for hydraulic fracturing design in tight oil and gas reservoirs.展开更多
This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as co...This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as colored Mises stress nephograms,were obtained.These resources were integrated into the original curriculum to conduct teaching experiments.The results show that the use of digital resources significantly improved the quality of teaching in EM.The integration of simulation technology in EM teaching provides a promising direction for the improvement of vocational education and the cultivation of high-quality skilled talents.The development and application of more simulation-based teaching cases should be studied by scholars.展开更多
Virtual simulation experiment,as a new way to promote the digital transformation of education,has a broad development prospect and application value.The civil engineering experimental volume and space are huge,it has ...Virtual simulation experiment,as a new way to promote the digital transformation of education,has a broad development prospect and application value.The civil engineering experimental volume and space are huge,it has a long construction period,is highly dangerous,and is difficult to experiment with.In order to solve the contradiction between the traditional theory teaching of civil engineering and the engineering training of students,the construction of virtual simulation experimental teaching courses with a high degree of realism,intuition,and accuracy can be used as a useful supplement and innovation of experimental and practical teaching.This paper takes the virtual simulation experimental teaching course of urban overpasses as an example,introduces the necessity and practicability of the course construction,and describes the experimental principle structure of the course,the simulation scene design,the experimental teaching process,the experimental method,etc.The course has achieved good application results,and it has been recognized as the first-class virtual simulation teaching course of the Chongqing Municipal Government,which provides certain references to the construction of the same type of courses in the civil engineering profession.展开更多
A simulated experimental reduction of and the synthesis of uraninite by a sulfate-reducing bacteria, Desulfovibrio desulfuricans DSM 642, are first reported. The simulated physicochemical experimental conditions were:...A simulated experimental reduction of and the synthesis of uraninite by a sulfate-reducing bacteria, Desulfovibrio desulfuricans DSM 642, are first reported. The simulated physicochemical experimental conditions were: 35°C, pH=7.0-7.4, corresponding to the environments of formation of the sandstone-hosted interlayer oxidation-zone type uranium deposits in Xinjiang, NW China. Uraninite was formed on the surface of the host bacteria after a one-week's incubation. Therefore, sulfate-reducing bacteria, which existed extensively in Jurassic sandstone-producing environments, might have participated in the biomineralization of this uranium deposit. There is an important difference in the order- disorder of the crystalline structure between the uraninite produced by Desulfovibrio desulfuricans and naturally occurring uraninite. Long time and slow precipitation and growth of uraninite in the geological environment might have resulted in larger uraninite crystals, with uraninite nanocrystals arranged in order, whereas the experimentally produced uraninite is composed of unordered uraninite nanocrystals which, in contrast, result from the short time span of formation and rapid precipitation and growth of uraninite. The discovery has important implications for understanding genetic significance in mineralogy, and also indicates that in-situ bioremediation of U-contaminated environments and use of biotechnology in the treatment of radioactive liquid waste is being contemplated.展开更多
In order to investigate the controlling mechanism of temperature, fluid and other factors on water-rock interaction in the diagenetic process, we performed a series of simulated experiments on the interaction between ...In order to investigate the controlling mechanism of temperature, fluid and other factors on water-rock interaction in the diagenetic process, we performed a series of simulated experiments on the interaction between two kinds of fluids with different salinity and a composite mineral system （simulated sandstone）, which contains albite, K-feldspar and other minerals. The experimental results showed that acidity was the most important factor that affected the dissolution of minerals in the composite mineral system. The lower the pH value, the more easily the minerals dissolved. At the same pH value, the dissolution abilities of different acids for various mineral components were also different. Compared to hydrochloric acid （inorganic acid）, oxalic acid （organic acid） was more able to dissolve aluminosilicate minerals. However, the dissolution ability of oxalic acid for carbonate minerals was lower than that of hydrochloric acid. In the process of fluid-rock interaction, dissolution of feldspar was relatively complicated. Increase of temperature would accelerate the dissolution of feldspar. Under acidic conditions, albite had a higher dissolution rate than K-feldspar. K-feldspar could dissolve and convert into montmorillonite and kaolinite, while albite could dissolve and convert into kaolinite both at 40℃ and 80℃. Presence of organic acid, and decrease of pH value and water salinity were all favorable for the dissolution of feldspar, but weakened the ability to form clay minerals.展开更多
[Objective] This study aimed to explore the effects of soil erosion on the productivity of sloping field. [Method] Through removing of and covering with topsoil in a micro-plot experiment, the effect of soil erosion o...[Objective] This study aimed to explore the effects of soil erosion on the productivity of sloping field. [Method] Through removing of and covering with topsoil in a micro-plot experiment, the effect of soil erosion on productivity of sloping field was studied. [Result] The results showed that there was extremely significantly posi- tive correlation between the thicknesses of covered topsoil with either the yield of maize seeds or the yield of maize stalks, which indicated that the yields of maize seeds and maize stalks decreased extremely significantly with the increase of the amount of surface soil loss caused by erosion on the sloping field. The yields of maize seeds and maize stalks decreased by 29.62% and 24.46% respectively in the treatment with removal of a 15 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks decreased by 17.31% and 20.14% re- spectively in the treatment with removal of a 10 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks decreased by 12.69% and 11.51% respectively in the treatment with removal of a 5 cm thick layer of ma- ture topsoil in the plow layer; the yields of maize seeds and maize stalks increased by 10.00% and 9.35% respectively in the treatment with covering with a 5 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks increased by 15.77% and 16.19% respectively in the treatment with covering with a 10 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks increased by 17.69% and 25.18% respectively in the treat- ment with covering with a 15 cm thick layer of mature topsoil in the plow layer. [Conclusion] This study provides a basis for assessing the effect of soil erosion on sloping field.展开更多
A series of experiments and numerical simulations are carried out in a high-speed axial compressor to systematically investigate the influence and underlying flow mechanisms of micro tip injection on enhancing compres...A series of experiments and numerical simulations are carried out in a high-speed axial compressor to systematically investigate the influence and underlying flow mechanisms of micro tip injection on enhancing compressor stability.Different geometric structures of micro tip injection have been investigated,including the axial positions of injector port,injected mass flow rate and injector diameter.First,seven designed micro tip injection structures and one solid wall casing are tested in the compressor test rig to elucidate the influence of different micro tip injection parameters on the compressor stability.Then,numerical simulations are conducted to analyze the underlying flow mechanisms of micro tip injection with different design parameters on enhancing the compressor stability.The experimental and numerical investigation reveal that when the injection port is located upstream of the low-speed region,the compressor stability is significantly enhanced.The tip injection with larger injected mass flow can obtain higher stall margin improvement.Smaller injector diameter produces higher injection momentum and velocity,contributing to greater improvement on the compressor stability.展开更多
The flow field around a spur dike has three-dimensional characteristics. In order to analyze the influence of the flow field on pollutant transport, based on a compressive volume of fluid （VOF） scheme, the three-dim...The flow field around a spur dike has three-dimensional characteristics. In order to analyze the influence of the flow field on pollutant transport, based on a compressive volume of fluid （VOF） scheme, the three-dimensional transient compressive pollutant transport model （CPTM） and the cubic equation （CE） bounded differencing scheme were developed. For the calibration and validation of CPTM, laboratory experiments were carried out in a flume with a non-submerged spur dike. The spur dike was angled at 60°, 90°, and 120° from the upstream direction. The simulation results agreed with the experimental results. The simulations and experiments showed that the distribution of pollutant concentration was determined by circumfluence and the main flow. Concentration decay in the circumfluenee zone was slower than that in the main flow. Downstream of the spur dike, the concentration fluctuation became intensive with the increase of spur dike angle.展开更多
In order to improve our understanding of rock fracture and fault instability driven by high-pressure fluid sources, the authors carried out rock fracture tests using granite under a confining pressure of 80 MPa with f...In order to improve our understanding of rock fracture and fault instability driven by high-pressure fluid sources, the authors carried out rock fracture tests using granite under a confining pressure of 80 MPa with fluid injection in the laboratory. Furthermore, we tested a number of numerical models using the FLAC;modeling software to find the best model to represent the experimental results. The high-speed multichannel acoustic emission（AE） waveform recording system used in this study made it possible to examine the total fracture process through detailed monitoring of AE hypocenters and seismic velocity.The experimental results show that injecting high-pressure oil into the rock sample can induce AE activity at very low stress levels and can dramatically reduce the strength of the rock. The results of the numerical simulations show that major experimental results, including the strength, the temporal and spatial patterns of the AE events, and the role of the fluid can be represented fairly well by a model involving（1） randomly distributed defect elements to model pre-existing cracks,（2） random modification of rock properties to represent inhomogeneity introduced by different mineral grains, and（3）macroscopic inhomogeneity. Our study, which incorporates laboratory experiments and numerical simulations, indicates that such an approach is helpful in finding a better model not only for simulating experimental results but also for upscaling purposes.展开更多
With the development of cold region engineering,it is crucial to study the mechanical properties of frozen soil.In practice,frozen soil is inevitably subject to impact loading,making the study of frozen soil under imp...With the development of cold region engineering,it is crucial to study the mechanical properties of frozen soil.In practice,frozen soil is inevitably subject to impact loading,making the study of frozen soil under impact loading necessary for engineering in cold regions.The split–Hopkinson pressure bar(SHPB)is an important experimental means for obtaining the dynamic performance of materials.In this study,an SHPB experiment was conducted on frozen soil under confining pressure.The frozen soil exhibited an evident strain rate effect and temperature effect under confining pressure.The SHPB experiment on frozen soil under confining pressure was simulated numerically using LS-DYNA software and the Holmquist–Johnson–Cook(HJC)material model.A loading simulation with passive confining pressure and active confining pressure was completed by adding an aluminum sleeve and applying a constant load.The simulation results obtained using the above methods were in good agreement with the experimental results.The strength of the frozen soil under confining pressure was greater than that of the uniaxial impact,and there was an evident confining pressure effect.Furthermore,the confining pressure provided by passive confinement was larger than that provided by active confinement.The passive confining pressure energy absorption efficiency was higher than for the active confining pressure due to the need to absorb more energy under the same damage conditions.The frozen soil exhibited viscoplastic failure characteristics under confining pressure.展开更多
A planar passive walking model with straight legs and round feet was discussed. This model can walk down steps, both on stairs with even steps and with random steps. Simulations showed that models with small moments o...A planar passive walking model with straight legs and round feet was discussed. This model can walk down steps, both on stairs with even steps and with random steps. Simulations showed that models with small moments of inertia can navigate large height steps. Period-doubling has been observed when the space between steps grows. This period-doubling has been validated by experiments, and the results of experiments were coincident with the simulation.展开更多
Sesquiterpanes are ubiquitous components of crude oils and ancient sediments.Liquid saturated hydrocarbons from simulated pyrolysis experiments on immature organic-rich mudstone collected from the Lower Cretaceous Hes...Sesquiterpanes are ubiquitous components of crude oils and ancient sediments.Liquid saturated hydrocarbons from simulated pyrolysis experiments on immature organic-rich mudstone collected from the Lower Cretaceous Hesigewula Sag were analyzed by gas chromatography-mass spectrometry(GC-MS).C14 bicyclic sesquiterpanes,namely,8β(H)-drimane,8β(H)-homodrimane,and 8 a(H)-homodrimane were detected and identified on basis of their diagnostic fragment ions(m/z123,179,193,and 207),and previously published mass spectra data,and these bicyclic sesquiterpanes presented relatively regular characteristics in their thermal evolution.The ratios 8β(H)-drimane/8β(H)-homodrimane,8β(H)-homodrimane/8 a(H)-homodrimane,and 8β(H)-drimane/8 a(H)-homodrimane all show a clear upward trend with increasing temperature below the temperature turning point.Thus,all these ratios can be used as evolution indexes of source rocks in the immature-lowmaturity stage.However,the last two ratios may be more suitable than the first ratio as valid parameters for measuring the extent of thermal evolution of organic matter in the immature-low-maturity stage because their change amplitude with increasing temperature is more obvious.展开更多
To investigate the metal flow during the railway wheel forming process, experiments and finite element method （FEM） simulation were carried out. An axisymmetric modeling for the wheel rolling process was proposed to...To investigate the metal flow during the railway wheel forming process, experiments and finite element method （FEM） simulation were carried out. An axisymmetric modeling for the wheel rolling process was proposed to predict the metal flow in radial direction, by which the whole multi-stage forming process could be simulated in axisymmetric and integral way. The result shows that the axisymmetric simulation method was an effective method to explore the metal flow in radial direction and to analyze the relationships of tools motion during the wheel rolling. The detail information about metal flow in railway wheel forming process was obtained. The metal in the wheel web was from the area near the half radius of the original billet; the chill zone of the billet became an envelope of the rim and part of the web with a maximum thickness of about 6 mm below the tread. At the wheel rolling stage, the metal in the rim flowed towards the web; the metal near the surfaces of the conjunction region between the web and rim suffered severe shear deformation.展开更多
基金Supported by the National Undergraduate Innovation Training Program(Project No.202211437036).
文摘In this study,the hydraulic behavior and sand transport efficiency of the siphon automatic sand discharge device were studied by software simulation tests.By simulating the actual situation,this study analyzed how factors such as the difference in water level,sediment concentration,and pipeline layout affected the sediment discharge effect.The results show that the sediment discharge device can effectively discharge sediment under diverse operating conditions and show adaptability to different environmental conditions,which indicates that it is suitable for various types of reservoir environments.
基金financially supported by the National Natural Science Foundation of China(No.U20B6003)the China Scholarship Council(No.202306440015)a project of the China Petroleum&Chemical Corporation(No.P22174)。
文摘The hybrid CO_(2) thermal technique has achieved considerable success globally in extracting residual heavy oil from reserves following a long-term steam stimulation process.Using microscopic visualization experiments and molecular dynamics(MD)simulations,this study investigates the microscopic enhanced oil recovery(EOR)mechanisms underlying residual oil removal using hybrid CO_(2) thermal systems.Based on the experimental models for the occurrence of heavy oil,this study evaluates the performance of hybrid CO_(2) thermal systems under various conditions using MD simulations.The results demonstrate that introducing CO_(2) molecules into heavy oil can effectively penetrate and decompose dense aggregates that are originally formed on hydrophobic surfaces.A stable miscible hybrid CO_(2) thermal system,with a high effective distribution ratio of CO_(2),proficiently reduces the interaction energies between heavy oil and rock surfaces,as well as within heavy oil.A visualization analysis of the interactions reveals that strong van der Waals(vdW)attractions occur between CO_(2) and heavy oil molecules,effectively promoting the decomposition and swelling of heavy oil.This unlocks the residual oil on the hydrophobic surfaces.Considering the impacts of temperature and CO_(2) concentration,an optimal gas-to-steam injection ratio(here,the CO_(2):steam ratio)ranging between 1:6 and 1:9 is recommended.This study examines the microscopic mechanisms underlying the hybrid CO_(2) thermal technique at a molecular scale,providing a significant theoretical guide for its expanded application in EOR.
基金funded by the National Natural Science Foundation of China(Nos.42077228,52174085)。
文摘With the increasing development of deepburied engineering projects,rockburst disasters have become a frequent concern.Studies have indicated that tunnel diameter is a critical factor influencing the occurrence of rockbursts.To investigate the influence of tunnel diameter on the deformation and failure characteristics of surrounding rock,large-sized rocklike gypsum specimens were tested using a selfdeveloped true triaxial rockburst loading system containing circular tunnels with three different diameters(D=0.07 m,0.11 m,and 0.15 m).Acoustic emission monitoring,together with a miniature intelligent camera,was employed to analyze the entire process,focusing on macroscopic failure patterns,fragment characteristics,and underlying failure mechanisms.In addition,theoretical analyses were carried out and combined with numerical simulations to investigate the differences in energy evolution associated with rockburst physical models.The results indicate that:(1)The rockburst process with different tunnel diameters consistently evolved through three distinct stages—initial particle ejection,crack propagation accompanied by flake spalling,and,finally,fragment ejection leading to the formation of a‘V'-shaped notch.(2)Increasing tunnel diameter reduces rockburst failure load while increasing surrounding rock damage extent,total mass and average size of ejected fragments.Additionally,shear failure proportion decreases with tensile failure becoming increasingly dominant.(3)Larger tunnel diameters reduce the attenuation rate of elastic strain energy,thereby expanding the zone of elastic strain energy accumulation and disturbance and creating conditions for larger volume rockburst.(4)Larger tunnel diameters result in a smaller principal stress ratio at equivalent distances in the surrounding rock,indicating a higher likelihood of tensile failure.(5)Numerical analyses further reveal that larger tunnel diameters reduce the maximum elastic strain energy density around the tunnel,lowering the energy released per unit volume of rockburst fragments and their ejection velocities.However,both the total failure volume and overall energy release from rockburst increase.Model experiments with different tunnel diameters are of great significance for optimizing engineering design and parameter selection,as well as guiding tunnel construction under complex geological conditions.
基金co-supported by National Natural Science Foundation of China(No.52075253)National Natural Science Foundation of China for Creative Research Groups(No.51921003).
文摘Materials that are difficult to cut,such as titanium alloys,are widely used in large load-bearing integral components of aircraft,leading to great challenges for manufacturing.Electrochemical milling is a way for machining difficult-to-cut materials through Computer Numerical Control(CNC)trajectory motion.Using a tilted large cathode machining surface and the cut-in feed mode,an efficient and low-cost method is obtained for machining the large integral components.A novel crossed and inclined structure of the flow mode is designed to realize electrochemical milling with a large tilted cathode surface.Compared to the vertical flow mode with one inlet,the proposed flow mode has two inlets that independently supply electrolytes,and the inclined channels make the flow field more stable.Flow field simulations are performed for both the vertical and proposed flow modes.The results show that the proposed flow mode avoids the random diversion of electrolytes and the ultralow flow velocity at both ends of the nozzle area,improving the velocity,uniformity,and stability of the electrolytes.The inclination angle of the crossed and inclined flow field is optimized.Finally,limit feed rate experiments are conducted in two modes,and the limit feed rate is 70 mm/min in the proposed mode.A sector workpiece of a large circular surface with approximately 8.77 mm thickness is machined 9 times by the cut-in electrochemical milling,the material removal rate is 4872 mm^(3)/min,and the surface roughness is superior to 1.15μm.
文摘Most of the existing studies on tunnel blast wave are based on spherical or grouped charges, however,conventional weapons are mostly cylindrical rather than spherical. In order to analyze the impact of cylindrical charges on the tunnel blast wave loads and to develop a quantitative calculation method, this study carried out experimental and numerical research. Initially, external explosion experiments were conducted using both 35 kg spherical charges and cylindrical charges with aspect ratio of 4.8 at two different distances from the tunnel entrance. Comparative analysis of the blast wave parameters in the tunnel revealed that the explosive equivalent of the cylindrical charges was significantly higher than that of the spherical charges. To address this, an equivalent coefficient κ based on the spherical charges was proposed for the cylindrical charges. Subsequently, numerical simulations were conducted for the experimental conditions, and the numerical simulation results match the experiments well. Through numerical calculations, the reliability of the equivalent coefficient κ under the experimental conditions was verified, and comparison analysis indicated that the explosion energy of cylindrical charges spreads more radially, resulting in more explosion energy entering the tunnel, which is the fundamental reason for the increase in tunnel blast wave loads. Additionally, analyzing the explosion energy ratio entering the tunnel is an effective method for calculating the equivalent coefficient κ. Finally, through more than one hundred sets of numerical calculation results, the impact of the proportional distance λ and the ratio of charge mass to the tunnel cross-section dimension φ on the equivalence coefficients κ was investigated. An empirical formula for the equivalence coefficient κ was derived through fitting, and the accuracy of the formula was validated through literature experimental results. The research findings of this paper will provide valuable guidance for the calculation of blast wave loads in tunnel.
文摘Sloshing experiment is crucial to determine the reaction performance of regeneration columns on an offshore floating platform.A novel type of column motion simulating device and a Marine Predator Algorithm-based Sliding Mode Controller(MPA-SMC)are proposed for such sloshing experiments.The simulator consists of a Stewart platform and a steel framework.The Stewart platform is located at the column's center of gravity(CoG)and supported by the steel framework.The platform's hydraulic servo system is controlled by a sliding mode controller with parameters optimized by MPA to improve robustness and precision.A numerical sloshing experiment is conducted using the proposed device and controller.The results show that the novel motion simulator has lower torque during the column sloshes,and the proposed controller performs better than a well-tuned PID controller in terms of target tracking precision and anti-interference capability.
基金supported by the Major Scientific and Technological Projects of CNPC under grant ZD2019-183-006the National Science and Technology Major Project of China(2016ZX05014002-006)the National Natural Science Foundation of China(42072234)。
文摘This study aims to elucidate the dynamic evolution mechanism of the fracturing fracture system during the exploration and development of complex oil and gas reservoirs.By integrating methods of rock mechanical testing,logging calculation,and seismic inversion technology,we obtained the current insitu stress characteristics of a single well and rock mechanical parameters.Simultaneously,significant controlling factors of rock mechanical properties were analyzed.Subsequently,by coupling hydraulic fracturing physical experiments with finite element numerical simulation,three different fracturing models were configured:single-cluster,double-cluster,and triple-cluster perforations.Combined with acoustic emission technology,the fracture initiation mode and evolution characteristics during the loading process were determined.The results indicate the following findings:(1)The extension direction and length of the fracture are significantly controlled by the direction of the maximum horizontal principal stress.(2)Areas with poor cementation and compactness exhibit complex fracture morphology,prone to generating network fractures.(3)The interlayer development of fracturing fractures is controlled by the strata occurrence.(4)Increasing the displacement of fracturing fluid enlarges the fracturing fracture length and height.This research provides theoretical support and effective guidance for hydraulic fracturing design in tight oil and gas reservoirs.
基金Science and Technology Key Project of Beijing Polytechnic(Project number:2024X008-KXZ)。
文摘This paper explores the integration of simulation technology in Engineering Mechanics(EM)teaching in vocational colleges.A case study was conducted using the tensile test as an example,and digital resources,such as colored Mises stress nephograms,were obtained.These resources were integrated into the original curriculum to conduct teaching experiments.The results show that the use of digital resources significantly improved the quality of teaching in EM.The integration of simulation technology in EM teaching provides a promising direction for the improvement of vocational education and the cultivation of high-quality skilled talents.The development and application of more simulation-based teaching cases should be studied by scholars.
基金Chongqing Institute of Technology’s 2022 Virtual Simulation Experiment“Golden Course”Construction Project“Virtual Simulation Experiment of Urban Overpass Vehicle Passage”2023 Teaching Method Reform and“Information Technology+”Smart Teaching Special Research Project Information Technology Multi-Dimensional Research Results of“Enabling Virtual Simulation Experiment Smart Teaching Reform and Practice”。
文摘Virtual simulation experiment,as a new way to promote the digital transformation of education,has a broad development prospect and application value.The civil engineering experimental volume and space are huge,it has a long construction period,is highly dangerous,and is difficult to experiment with.In order to solve the contradiction between the traditional theory teaching of civil engineering and the engineering training of students,the construction of virtual simulation experimental teaching courses with a high degree of realism,intuition,and accuracy can be used as a useful supplement and innovation of experimental and practical teaching.This paper takes the virtual simulation experimental teaching course of urban overpasses as an example,introduces the necessity and practicability of the course construction,and describes the experimental principle structure of the course,the simulation scene design,the experimental teaching process,the experimental method,etc.The course has achieved good application results,and it has been recognized as the first-class virtual simulation teaching course of the Chongqing Municipal Government,which provides certain references to the construction of the same type of courses in the civil engineering profession.
基金the National Science Foundation.USA.(NSF Grant EAR 02-10820)the National Natural ScienceFoundation of China(NSFC Grant No.40173031)+1 种基金the International Cooperative Research Foundation of NSFC(Grant No.2002-40210104086) the Ph.D.Base Foundation of the Ministry of Education of China(Grant No.20020284036).
文摘A simulated experimental reduction of and the synthesis of uraninite by a sulfate-reducing bacteria, Desulfovibrio desulfuricans DSM 642, are first reported. The simulated physicochemical experimental conditions were: 35°C, pH=7.0-7.4, corresponding to the environments of formation of the sandstone-hosted interlayer oxidation-zone type uranium deposits in Xinjiang, NW China. Uraninite was formed on the surface of the host bacteria after a one-week's incubation. Therefore, sulfate-reducing bacteria, which existed extensively in Jurassic sandstone-producing environments, might have participated in the biomineralization of this uranium deposit. There is an important difference in the order- disorder of the crystalline structure between the uraninite produced by Desulfovibrio desulfuricans and naturally occurring uraninite. Long time and slow precipitation and growth of uraninite in the geological environment might have resulted in larger uraninite crystals, with uraninite nanocrystals arranged in order, whereas the experimentally produced uraninite is composed of unordered uraninite nanocrystals which, in contrast, result from the short time span of formation and rapid precipitation and growth of uraninite. The discovery has important implications for understanding genetic significance in mineralogy, and also indicates that in-situ bioremediation of U-contaminated environments and use of biotechnology in the treatment of radioactive liquid waste is being contemplated.
基金supported by China Postdoctoral ScienceFoundation-funded projects (No.20070420492)NationalNatural Science Foundation (No.40772088)
文摘In order to investigate the controlling mechanism of temperature, fluid and other factors on water-rock interaction in the diagenetic process, we performed a series of simulated experiments on the interaction between two kinds of fluids with different salinity and a composite mineral system （simulated sandstone）, which contains albite, K-feldspar and other minerals. The experimental results showed that acidity was the most important factor that affected the dissolution of minerals in the composite mineral system. The lower the pH value, the more easily the minerals dissolved. At the same pH value, the dissolution abilities of different acids for various mineral components were also different. Compared to hydrochloric acid （inorganic acid）, oxalic acid （organic acid） was more able to dissolve aluminosilicate minerals. However, the dissolution ability of oxalic acid for carbonate minerals was lower than that of hydrochloric acid. In the process of fluid-rock interaction, dissolution of feldspar was relatively complicated. Increase of temperature would accelerate the dissolution of feldspar. Under acidic conditions, albite had a higher dissolution rate than K-feldspar. K-feldspar could dissolve and convert into montmorillonite and kaolinite, while albite could dissolve and convert into kaolinite both at 40℃ and 80℃. Presence of organic acid, and decrease of pH value and water salinity were all favorable for the dissolution of feldspar, but weakened the ability to form clay minerals.
基金Supported by the Special Fund of International Plant Nutrition Institute Fund (NMS-Yunnan200801)~~
文摘[Objective] This study aimed to explore the effects of soil erosion on the productivity of sloping field. [Method] Through removing of and covering with topsoil in a micro-plot experiment, the effect of soil erosion on productivity of sloping field was studied. [Result] The results showed that there was extremely significantly posi- tive correlation between the thicknesses of covered topsoil with either the yield of maize seeds or the yield of maize stalks, which indicated that the yields of maize seeds and maize stalks decreased extremely significantly with the increase of the amount of surface soil loss caused by erosion on the sloping field. The yields of maize seeds and maize stalks decreased by 29.62% and 24.46% respectively in the treatment with removal of a 15 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks decreased by 17.31% and 20.14% re- spectively in the treatment with removal of a 10 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks decreased by 12.69% and 11.51% respectively in the treatment with removal of a 5 cm thick layer of ma- ture topsoil in the plow layer; the yields of maize seeds and maize stalks increased by 10.00% and 9.35% respectively in the treatment with covering with a 5 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks increased by 15.77% and 16.19% respectively in the treatment with covering with a 10 cm thick layer of mature topsoil in the plow layer; the yields of maize seeds and maize stalks increased by 17.69% and 25.18% respectively in the treat- ment with covering with a 15 cm thick layer of mature topsoil in the plow layer. [Conclusion] This study provides a basis for assessing the effect of soil erosion on sloping field.
基金supported by National Natural Science Foundation of China(No.52076179)National Science and Technology Major Projects of China(No.J2019-I-0011).
文摘A series of experiments and numerical simulations are carried out in a high-speed axial compressor to systematically investigate the influence and underlying flow mechanisms of micro tip injection on enhancing compressor stability.Different geometric structures of micro tip injection have been investigated,including the axial positions of injector port,injected mass flow rate and injector diameter.First,seven designed micro tip injection structures and one solid wall casing are tested in the compressor test rig to elucidate the influence of different micro tip injection parameters on the compressor stability.Then,numerical simulations are conducted to analyze the underlying flow mechanisms of micro tip injection with different design parameters on enhancing the compressor stability.The experimental and numerical investigation reveal that when the injection port is located upstream of the low-speed region,the compressor stability is significantly enhanced.The tip injection with larger injected mass flow can obtain higher stall margin improvement.Smaller injector diameter produces higher injection momentum and velocity,contributing to greater improvement on the compressor stability.
基金supported by the Eleventh Five-year Scientific and Technical Plan (Grant No. 2006BAK01B02-03)the Course Foundation of Nanjing University of Technology (Grant No. 39714004)
文摘The flow field around a spur dike has three-dimensional characteristics. In order to analyze the influence of the flow field on pollutant transport, based on a compressive volume of fluid （VOF） scheme, the three-dimensional transient compressive pollutant transport model （CPTM） and the cubic equation （CE） bounded differencing scheme were developed. For the calibration and validation of CPTM, laboratory experiments were carried out in a flume with a non-submerged spur dike. The spur dike was angled at 60°, 90°, and 120° from the upstream direction. The simulation results agreed with the experimental results. The simulations and experiments showed that the distribution of pollutant concentration was determined by circumfluence and the main flow. Concentration decay in the circumfluenee zone was slower than that in the main flow. Downstream of the spur dike, the concentration fluctuation became intensive with the increase of spur dike angle.
基金supported by State Key Laboratory of Earthquake Dynamics,China
文摘In order to improve our understanding of rock fracture and fault instability driven by high-pressure fluid sources, the authors carried out rock fracture tests using granite under a confining pressure of 80 MPa with fluid injection in the laboratory. Furthermore, we tested a number of numerical models using the FLAC;modeling software to find the best model to represent the experimental results. The high-speed multichannel acoustic emission（AE） waveform recording system used in this study made it possible to examine the total fracture process through detailed monitoring of AE hypocenters and seismic velocity.The experimental results show that injecting high-pressure oil into the rock sample can induce AE activity at very low stress levels and can dramatically reduce the strength of the rock. The results of the numerical simulations show that major experimental results, including the strength, the temporal and spatial patterns of the AE events, and the role of the fluid can be represented fairly well by a model involving（1） randomly distributed defect elements to model pre-existing cracks,（2） random modification of rock properties to represent inhomogeneity introduced by different mineral grains, and（3）macroscopic inhomogeneity. Our study, which incorporates laboratory experiments and numerical simulations, indicates that such an approach is helpful in finding a better model not only for simulating experimental results but also for upscaling purposes.
基金This work was supported by the National Natural Science Foundation of China(Grants 11672253 and 11972028)the Opening Foundation of the State Key Laboratory of Frozen Soil Engineering(Grant SKLFSE201918)and the Opening Foundation of the State Key Laboratory for Strength and Vibration of Mechanical Structures(Grant SV2019-KF-19).
文摘With the development of cold region engineering,it is crucial to study the mechanical properties of frozen soil.In practice,frozen soil is inevitably subject to impact loading,making the study of frozen soil under impact loading necessary for engineering in cold regions.The split–Hopkinson pressure bar(SHPB)is an important experimental means for obtaining the dynamic performance of materials.In this study,an SHPB experiment was conducted on frozen soil under confining pressure.The frozen soil exhibited an evident strain rate effect and temperature effect under confining pressure.The SHPB experiment on frozen soil under confining pressure was simulated numerically using LS-DYNA software and the Holmquist–Johnson–Cook(HJC)material model.A loading simulation with passive confining pressure and active confining pressure was completed by adding an aluminum sleeve and applying a constant load.The simulation results obtained using the above methods were in good agreement with the experimental results.The strength of the frozen soil under confining pressure was greater than that of the uniaxial impact,and there was an evident confining pressure effect.Furthermore,the confining pressure provided by passive confinement was larger than that provided by active confinement.The passive confining pressure energy absorption efficiency was higher than for the active confining pressure due to the need to absorb more energy under the same damage conditions.The frozen soil exhibited viscoplastic failure characteristics under confining pressure.
文摘A planar passive walking model with straight legs and round feet was discussed. This model can walk down steps, both on stairs with even steps and with random steps. Simulations showed that models with small moments of inertia can navigate large height steps. Period-doubling has been observed when the space between steps grows. This period-doubling has been validated by experiments, and the results of experiments were coincident with the simulation.
基金supported by the National Natural Science Foundation of China (Grant Nos. 41672117 and 41503034)the Hubei Provincial Natural Science Foundation of China (Project No. 2017CFA027)+1 种基金the Open Subject of Shandong Provincial Key Laboratory of Depositional Mineralization & Sedimentary Mineral (Baojun Liu Geoscience Science Foundation) (DMSM2017084)the Open Subject of the State Key Laboratory of Petroleum Resources and Prospecting (PRP/open-1509)
文摘Sesquiterpanes are ubiquitous components of crude oils and ancient sediments.Liquid saturated hydrocarbons from simulated pyrolysis experiments on immature organic-rich mudstone collected from the Lower Cretaceous Hesigewula Sag were analyzed by gas chromatography-mass spectrometry(GC-MS).C14 bicyclic sesquiterpanes,namely,8β(H)-drimane,8β(H)-homodrimane,and 8 a(H)-homodrimane were detected and identified on basis of their diagnostic fragment ions(m/z123,179,193,and 207),and previously published mass spectra data,and these bicyclic sesquiterpanes presented relatively regular characteristics in their thermal evolution.The ratios 8β(H)-drimane/8β(H)-homodrimane,8β(H)-homodrimane/8 a(H)-homodrimane,and 8β(H)-drimane/8 a(H)-homodrimane all show a clear upward trend with increasing temperature below the temperature turning point.Thus,all these ratios can be used as evolution indexes of source rocks in the immature-lowmaturity stage.However,the last two ratios may be more suitable than the first ratio as valid parameters for measuring the extent of thermal evolution of organic matter in the immature-low-maturity stage because their change amplitude with increasing temperature is more obvious.
基金Sponsored by National High-tech Research and Development Program(863 Program)of China(2008AA030703)
文摘To investigate the metal flow during the railway wheel forming process, experiments and finite element method （FEM） simulation were carried out. An axisymmetric modeling for the wheel rolling process was proposed to predict the metal flow in radial direction, by which the whole multi-stage forming process could be simulated in axisymmetric and integral way. The result shows that the axisymmetric simulation method was an effective method to explore the metal flow in radial direction and to analyze the relationships of tools motion during the wheel rolling. The detail information about metal flow in railway wheel forming process was obtained. The metal in the wheel web was from the area near the half radius of the original billet; the chill zone of the billet became an envelope of the rim and part of the web with a maximum thickness of about 6 mm below the tread. At the wheel rolling stage, the metal in the rim flowed towards the web; the metal near the surfaces of the conjunction region between the web and rim suffered severe shear deformation.
