The effect of heat treatment on the transformation temperature of Ti?52.2%Ni (mole fraction) alloy was studied using differential scanning calorimetry (DSC). The transformation temperatures of the alloy can be adjuste...The effect of heat treatment on the transformation temperature of Ti?52.2%Ni (mole fraction) alloy was studied using differential scanning calorimetry (DSC). The transformation temperatures of the alloy can be adjusted effectively by heat treatment. Dense and stable SiO2 coatings were deposited on the surface of the pre-oxidized TiNi alloy by sol?gel method. The bonding strength of films and matrix was (65.9±1.5) N. The electrochemical corrosion test shows that the TiNi alloy with SiO2 coating has excellent corrosion resistance in the Hank’s simulated body fluid. The release behaviors of Ni ion of the alloy with and without SiO2 coating implanted in the acoustic vesicle of guinea pig were studied by EDS testing, which was inhibited effectively by the dense and stable SiO2 coating on the alloy.展开更多
To alleviate catalytic coking on the inner surface of radiant tube for ethylene production in petrochemical plants,SiO2/S coatings were deposited on HP40 alloy specimens using dimethyldisulfide （DMDS） and tetraethox...To alleviate catalytic coking on the inner surface of radiant tube for ethylene production in petrochemical plants,SiO2/S coatings were deposited on HP40 alloy specimens using dimethyldisulfide （DMDS） and tetraethoxysilane （TEOS） by atmospheric pressure chemical vapor deposition （APCVD）. A two-dimension mathematical model was made to predict the growth rate of SiO2/S coating and to study the effects of deposition parameters on the deposition rate. The results show that the predicted deposition rate is in good agreement with the experimental one. The deposition rate mainly depends on the concentrations of precursors in the total gas flow, concentrations of intermediates on the deposition surface, total gas flow rate and deposition temperature. The weight of SiO2/S coating linearly increases with the deposition time. When the gas flow rate is below 0.3 m/s, the rate-limiting step of SiO2/S coating deposition is the diffusions of intermediates.However, the surface reactions of intermediates will be the rate-limiting step after the gas flow rate is above 0.3 m/s. When the deposition temperature is below 780℃, the rate-limiting step of SiO2/S coating deposition mainly depends on the surface reactions of intermediates. When the deposition temperature is above 780℃,the rate-limiting step depends on the diffusions of intermediates. The deposition rate increases with increasing the concentrations of the intermediates. However, when the partial pressures of the intermediates reach 8 Pa,the deposition rate keeps constant.展开更多
SiO2 coated Ce2S3 red pigment was prepared in ethanol/H2O system via sol-gel method and TEOS were used as silica sources. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy...SiO2 coated Ce2S3 red pigment was prepared in ethanol/H2O system via sol-gel method and TEOS were used as silica sources. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDX）, UV-visible spectro-photometer and automatic colorimeter were used to investigate the properties of the samples. The results showed that the compact SiO2 film formed on the surface of Ce2S3 pigment at a cerium silicon molar ratio of 2. The thermal stability temperature of Ce2S3 pigment was improved to 450 oC after SiO2 coating. In addition, the color of Ce2S3 pigment was not affected significantly through coating colorless and transparent SiO2 and it could be used as safe red pigment in higher temperature fields.展开更多
Four kinds of Mg alloys reinforced with carbon fibres were fabricated by a gas pressure infiltration technique. The fibres were pre-coated a SiO2 layer prior to fabrication. DifFerent microstructures and interactions ...Four kinds of Mg alloys reinforced with carbon fibres were fabricated by a gas pressure infiltration technique. The fibres were pre-coated a SiO2 layer prior to fabrication. DifFerent microstructures and interactions in the fibre-matrix interface of these composites were observed by transmission electron microscopy （TEM）. The results showed that the interracial interaction strongly depended on the content of Al in the Mg-based matrices. The microstructure of the interface could then be controlled by adjusting the Al content of the Mgbased matrix. In addition, fibres extracted from different Mg-based matrix all had some degradation owing to the interracial reaction and the fibre-matrix interdiffusion.展开更多
The combination of deep wet etching and a magneto-rheological finishing （MRF） process is investigated to simultaneously improve laser damage resistance of a fused-silica surface at 355 nm. The subsequently deposited...The combination of deep wet etching and a magneto-rheological finishing （MRF） process is investigated to simultaneously improve laser damage resistance of a fused-silica surface at 355 nm. The subsequently deposited SiO2 coatings are researched to clarify the impact of substrate finishing technology on the coatings. It is revealed that a deep removal proceeding from the single side or double side had a significant impact on the laser-induced damage threshold （LIDT） of the fused silica, especially for the rear surface. After the deep etching, the MRF process that followed does not actually increase the LIDT, but it does ameliorate the surface qualities without additional LIDT degradation. The combination guarantee both the integrity of the surface＇s finish and the laser damage resistance of the fused silica and subsequent SiO2 coatings.展开更多
Single-pulse and multi-pulse damage behaviors of ＂standard＂ （with A/4 stack structure） and ＂modified＂ （with reduced standing-wave field） HfO2/SiO2 mirror coatings are investigated using a commercial 50-fs, 800...Single-pulse and multi-pulse damage behaviors of ＂standard＂ （with A/4 stack structure） and ＂modified＂ （with reduced standing-wave field） HfO2/SiO2 mirror coatings are investigated using a commercial 50-fs, 800-nm Ti：sapphire laser system. Precise morphologies of damaged sites display strikingly different features when the samples are subjected to various number of incident pulses, which are explained reasonably by the standing-wave field distribution within the coatings. Meanwhile, the single-pulse laser-induced damage threshold of the ＂standard＂ mirror is improved by about 14% while suppressing the normalized electric field intensity at the outmost interface of the HfO2 and SiO2 layers by 37%. To discuss the damage mechanism, a theoretical model based on photoionization, avalanche ionization, and decays of electrons is adopted to simulate the evolution curves of the conduction-band electron densitv during r^ulse dHratian.展开更多
The anionic redox chemistry(O^2-→O^-)in P2-type sodium-ion battery cathodes has attracted much attention.However,determining how to tune the anionic redox reaction is still a major challenge.Herein,we tune the activi...The anionic redox chemistry(O^2-→O^-)in P2-type sodium-ion battery cathodes has attracted much attention.However,determining how to tune the anionic redox reaction is still a major challenge.Herein,we tune the activity and reversibility of both the anionic and cationic redox reactions of Na0.67Mn0.5Fe0.5O2 though an integrated strategy that combines the advantages of Li2SiO3 coating,Li doping and Si doping,and the initial capacity,rate performance and cycling stability are significantly improved.The in-depth modulation mechanism is revealed by means of neutron diffraction,X-ray absorption spectroscopy,in situ X-ray diffraction,electron paramagnetic resonance spectroscopy,first-principles calculations and so on.The Li2SiO3 coating alleviates the side reactions and enhances the cycling stability.Si^4+doping lowers the Na^+diffusion barrier due to the expanded interlayer spacing.Additionally,Si^4+doping improves the structural stability,oxygen redox activity and reversibility.Li^+doping in Na sites further increases the structure stability.The electron density maps confirm the greater activity of Na and O in the modified sample.Nuclear density maps and bond-valence energy landscapes identify the Na^+migration pathway from Nae site to Naf site(the positions of the Na ions in the crystal structure).The proposed insights into the modulation mechanism of the anionic and cationic redox chemistry are also instructive for designing other oxide-based cathode materials.展开更多
基金Project(81170609)supported by the National Natural Science Foundation of ChinaProject(11JJ6087)supported by the Nature Science Foundation of Hunan Province,ChinaProject supported by the Open Project of State Key Laboratory of Powder Metallurgy,Central South University,China
文摘The effect of heat treatment on the transformation temperature of Ti?52.2%Ni (mole fraction) alloy was studied using differential scanning calorimetry (DSC). The transformation temperatures of the alloy can be adjusted effectively by heat treatment. Dense and stable SiO2 coatings were deposited on the surface of the pre-oxidized TiNi alloy by sol?gel method. The bonding strength of films and matrix was (65.9±1.5) N. The electrochemical corrosion test shows that the TiNi alloy with SiO2 coating has excellent corrosion resistance in the Hank’s simulated body fluid. The release behaviors of Ni ion of the alloy with and without SiO2 coating implanted in the acoustic vesicle of guinea pig were studied by EDS testing, which was inhibited effectively by the dense and stable SiO2 coating on the alloy.
文摘To alleviate catalytic coking on the inner surface of radiant tube for ethylene production in petrochemical plants,SiO2/S coatings were deposited on HP40 alloy specimens using dimethyldisulfide （DMDS） and tetraethoxysilane （TEOS） by atmospheric pressure chemical vapor deposition （APCVD）. A two-dimension mathematical model was made to predict the growth rate of SiO2/S coating and to study the effects of deposition parameters on the deposition rate. The results show that the predicted deposition rate is in good agreement with the experimental one. The deposition rate mainly depends on the concentrations of precursors in the total gas flow, concentrations of intermediates on the deposition surface, total gas flow rate and deposition temperature. The weight of SiO2/S coating linearly increases with the deposition time. When the gas flow rate is below 0.3 m/s, the rate-limiting step of SiO2/S coating deposition is the diffusions of intermediates.However, the surface reactions of intermediates will be the rate-limiting step after the gas flow rate is above 0.3 m/s. When the deposition temperature is below 780℃, the rate-limiting step of SiO2/S coating deposition mainly depends on the surface reactions of intermediates. When the deposition temperature is above 780℃,the rate-limiting step depends on the diffusions of intermediates. The deposition rate increases with increasing the concentrations of the intermediates. However, when the partial pressures of the intermediates reach 8 Pa,the deposition rate keeps constant.
基金Project supported by National Science and Technology Support Program(2011BAE30B03)Special Fund from Shaanxi Provincial Department of Education(12JK0467the Graduate Innovation Fund of Shaanxi Universityof Science and Technology for the financial support
文摘SiO2 coated Ce2S3 red pigment was prepared in ethanol/H2O system via sol-gel method and TEOS were used as silica sources. X-ray diffraction （XRD）, scanning electron microscopy （SEM）, energy dispersive spectroscopy （EDX）, UV-visible spectro-photometer and automatic colorimeter were used to investigate the properties of the samples. The results showed that the compact SiO2 film formed on the surface of Ce2S3 pigment at a cerium silicon molar ratio of 2. The thermal stability temperature of Ce2S3 pigment was improved to 450 oC after SiO2 coating. In addition, the color of Ce2S3 pigment was not affected significantly through coating colorless and transparent SiO2 and it could be used as safe red pigment in higher temperature fields.
文摘Four kinds of Mg alloys reinforced with carbon fibres were fabricated by a gas pressure infiltration technique. The fibres were pre-coated a SiO2 layer prior to fabrication. DifFerent microstructures and interactions in the fibre-matrix interface of these composites were observed by transmission electron microscopy （TEM）. The results showed that the interracial interaction strongly depended on the content of Al in the Mg-based matrices. The microstructure of the interface could then be controlled by adjusting the Al content of the Mgbased matrix. In addition, fibres extracted from different Mg-based matrix all had some degradation owing to the interracial reaction and the fibre-matrix interdiffusion.
基金supported by the National Natural Science Foundation of China under Grant Nos.11104293 and 61308021
文摘The combination of deep wet etching and a magneto-rheological finishing （MRF） process is investigated to simultaneously improve laser damage resistance of a fused-silica surface at 355 nm. The subsequently deposited SiO2 coatings are researched to clarify the impact of substrate finishing technology on the coatings. It is revealed that a deep removal proceeding from the single side or double side had a significant impact on the laser-induced damage threshold （LIDT） of the fused silica, especially for the rear surface. After the deep etching, the MRF process that followed does not actually increase the LIDT, but it does ameliorate the surface qualities without additional LIDT degradation. The combination guarantee both the integrity of the surface＇s finish and the laser damage resistance of the fused silica and subsequent SiO2 coatings.
文摘Single-pulse and multi-pulse damage behaviors of ＂standard＂ （with A/4 stack structure） and ＂modified＂ （with reduced standing-wave field） HfO2/SiO2 mirror coatings are investigated using a commercial 50-fs, 800-nm Ti：sapphire laser system. Precise morphologies of damaged sites display strikingly different features when the samples are subjected to various number of incident pulses, which are explained reasonably by the standing-wave field distribution within the coatings. Meanwhile, the single-pulse laser-induced damage threshold of the ＂standard＂ mirror is improved by about 14% while suppressing the normalized electric field intensity at the outmost interface of the HfO2 and SiO2 layers by 37%. To discuss the damage mechanism, a theoretical model based on photoionization, avalanche ionization, and decays of electrons is adopted to simulate the evolution curves of the conduction-band electron densitv during r^ulse dHratian.
基金supported by the National Natural Science Foundation of China(11975238 and 11575192)the Scientific Instrument Developing Project(ZDKYYQ20170001)+3 种基金the International Partnership Program(211211KYSB20170060 and 211211KYSB20180020)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB28000000)the Natural Science Foundation of Beijing Municipality(2182082)The support from University of Chinese Academy of Sciences is also appreciated。
文摘The anionic redox chemistry(O^2-→O^-)in P2-type sodium-ion battery cathodes has attracted much attention.However,determining how to tune the anionic redox reaction is still a major challenge.Herein,we tune the activity and reversibility of both the anionic and cationic redox reactions of Na0.67Mn0.5Fe0.5O2 though an integrated strategy that combines the advantages of Li2SiO3 coating,Li doping and Si doping,and the initial capacity,rate performance and cycling stability are significantly improved.The in-depth modulation mechanism is revealed by means of neutron diffraction,X-ray absorption spectroscopy,in situ X-ray diffraction,electron paramagnetic resonance spectroscopy,first-principles calculations and so on.The Li2SiO3 coating alleviates the side reactions and enhances the cycling stability.Si^4+doping lowers the Na^+diffusion barrier due to the expanded interlayer spacing.Additionally,Si^4+doping improves the structural stability,oxygen redox activity and reversibility.Li^+doping in Na sites further increases the structure stability.The electron density maps confirm the greater activity of Na and O in the modified sample.Nuclear density maps and bond-valence energy landscapes identify the Na^+migration pathway from Nae site to Naf site(the positions of the Na ions in the crystal structure).The proposed insights into the modulation mechanism of the anionic and cationic redox chemistry are also instructive for designing other oxide-based cathode materials.
