In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the annulus.Once cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,an...In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the annulus.Once cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial operations.Cuttings bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring effects.This paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning effect.Firstly,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was designed.Next,an evaluation method of hole cleaning effect of remover was established.After that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were investigated.The results demonstrate that the new type of remover with streamline blade performs better than conventional removers.The efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling fluid.While higher rate of penetration and large wellbore size result in worse hole cleaning.These findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.展开更多
Cuttings accumulation in horizontal drilling of a shale gas well is one of the main reasons for high drilling torque and drag and serious backing pressure and consequently influencing the rate of penetration(ROP),so i...Cuttings accumulation in horizontal drilling of a shale gas well is one of the main reasons for high drilling torque and drag and serious backing pressure and consequently influencing the rate of penetration(ROP),so inhibiting the generation of a cuttings bed and keeping the hole clean is an important prerequisite to ensure the smooth and safe drilling of horizontal section.In order to improve the hole cleaning efficiency of horizontal sections,this paper studied the decay laws of helical flow induced by helix angles and rotation speed of a newly developed cuttings bed remover with V-shaped blades for horizontal wells and their influences on the resuspension distribution of cuttings particles by virtue of the CFD numerical simulation method and EulereEuler binary-fluid model,combined with the theory of particle dynamics.Then,the parameters such as blade rotation speed and blade helix angle were optimized.And the following research results were obtained.First,with the increase of the rotation speed,cuttings deposit at the bottom of the annulus deflects to a certain degree.And the higher the rotation speed,the more obvious the deflection.Second,annulus pressure drop loss increases with the increase of the helix angle.And this phenomenon is more obvious when the helix angle is larger.Third,the field test results in Well Changning H25-7 of the southern Sichuan Basin show that after the application of the newly developed cuttings bed remover for horizontal wells,the drilling friction is decreased by 33%,the tripping is smooth without sticking.And in the process of its application,no complex downhole accident happened.Obviously,it provides good hole cleaning to ensure the safe and smooth implementation of the later casing running operation.In conclusion,this newly developed cuttings bed remover can satisfy the demand of cutting bed cleaning and drilling cost reduction and efficiency improvement of horizontal wells,so it is worth popularizing and applying.What's more,it provides guidance and reference for the design of similar cuttings bed removers.展开更多
In order to solve the problem of limited makeup removal ability of a single surfactant of Peg-20 glyceryl triisostearate in makeup remover,an efficient system was prepared which contained PEG-20 glyceryl triisostearat...In order to solve the problem of limited makeup removal ability of a single surfactant of Peg-20 glyceryl triisostearate in makeup remover,an efficient system was prepared which contained PEG-20 glyceryl triisostearate and a combination of Sorbeth-30 tetraoleate and Peg-5 glyceryl triisostearate.Leather test,skin colorimeter test and consumer self-evaluation were used to assess the makeup removal ability,rinsing performance and softness skin feel of the efficient makeup remover base.The results showed that a 7%combination of Sorbeth-30 tetraoleate and PEG-5 glyceryl triisostearate could significantly improve the comprehensive performance of single PEG-20 glyceryl triisostearate makeup remover system,furthermore,they performed best at the ratio of 6:1.We hope the findings can have guiding significance for the development of makeup remover products.展开更多
With the extensive application of polymer flooding technology in offshore oilfields,the plugging in polymer injection wells has become more and more severe,which seriously affects the oil displacement effect and regul...With the extensive application of polymer flooding technology in offshore oilfields,the plugging in polymer injection wells has become more and more severe,which seriously affects the oil displacement effect and regular production of oilfields.In this paper,a new kind of blockage remover has been developed and evaluated by rheological behavior experiments,dissolution experiments and core flooding experiments.The results reveal that this new blockage remover can effectively reduce the viscosity of polymer and completely degrade the reservoir blockage with low corrosion rate.It is beneficial to long-term production of oil wells in offshore oilfield.Results of core flooding experiments show that this new blockage remover can relieve polymer damage and improve permeability.The agent has been applied in LD10-1 oilfield in 2016,the daily injection rate increased significantly after stimulation.展开更多
It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,...It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,and FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbents were prepared by coupling fly ash-based Si-Al carriers.The active components Fe-Ce-La oxides and Si-Al carriers were characterized by TPD,TG,XRF,BET and XPS,respectively.The effects of temperature,Si/Al ratio and FeCeLaO loading rate on the sulfur resistance were investigated.Results show that the SO_(2) promotes the arsenic removal of Fe_(2)O_(3),CeLaO and FeCeLaO.At 400℃,the arsenic removal efficiencies of the three oxides increase from 45.3%,72.5% and 81.3% without SO_(2) to 62.6%,80.5%and 91.0%,respectively.The SO_(2) inhibits the arsenic removal of La_(2)O_(2)CO_(3) and FeLaO,and the inhibition effect is pronounced at high temperatures.The sulfur poisoning resistance of Si-Al carriers increases with the increase of Si/Al ratio.When the Si/Al ratio is increased to 9.74,the arsenic removal efficiency in the SO_(2) environment is 13.9% higher than that in the absence of SO_(2).Introducing FeCeLaO active components is beneficial for enhancing the SO_(2) poisoning resistance of Si-Al carriers.The strong sulfur resistance of the FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbent results from multiple factors:protective effects of Ce on Fe,La and Al;sulfation-induced generation of Ce^(3+)and surface-adsorbed oxygen;and strong surface acidity of SiO_(2).展开更多
To address the problems with catalytic degradation,such as poisoning and inactivation,a simple and efficient gas purging regeneration technique was developed for iron-based catalyst in-situ regeneration.Specifically,t...To address the problems with catalytic degradation,such as poisoning and inactivation,a simple and efficient gas purging regeneration technique was developed for iron-based catalyst in-situ regeneration.Specifically,the effects of carrier gas types,regeneration temperatures,and granular activated carbon(GAC)addition on iron-based catalyst regeneration were investigated.The Fe_(3)O_(4)/𝛾-Al_(2)O_(3) regenerated at 550°C with additional GAC and 15%water vapor exhibited the optimal degradation efficiency towards polychlorinated biphenyls(PCBs),with an increase from 41.2%to 93.5%,compared with non-regenerated Fe_(3)O_(4)/𝛾-Al_(2)O_(3).In addition,the 60-hour stability test revealed a well-recovered catalytic activity.During the Fe_(3)O_(4)/𝛾-Al_(2)O_(3) regeneration,the coke on the catalyst surface was oxidized and removed in the form of CO_(2),and meanwhile the oxidized Fe(III)was reduced into Fe(II)in the catalyst.This study provides a safe and efficient iron-based catalyst regeneration technology for PCB off-gas degradation and reveals the catalytic activity recovery mechanism during catalyst regeneration.展开更多
Environmental pollution,energy consumption,and greenhouse gas emissions are critical global issues.To address these challenges,optimizing skimmer coatings is a major step in commercializing cleaning oil stains.This re...Environmental pollution,energy consumption,and greenhouse gas emissions are critical global issues.To address these challenges,optimizing skimmer coatings is a major step in commercializing cleaning oil stains.This research presents a novel approach to creating and refining oil absorbent coatings,introducing a unique oil spill removal skimmer enhanced with a super hydrophobic polyaniline(PANI)nanofiber coating.The goal of this study was to improve oil absorption performance,increase the contact angle,lower drag,reduce energy consumption,achieve high desirability,and lower production costs.PANI treated with hydrochloric acid was a key focus as it resulted in higher porosity and smaller pore diameters,providing a larger surface area,which are crucial factors for boosting oil absorption and minimizing drag.To optimize optimal nanofiber morphology,PANI synthesized with methanesulfonic acid was first dedoped and then redoped with hydrochloric acid.After optimization,the most effective skimmer coating was achieved using a formulation consisting of 0.1%PANI,an ammonium persulfate/aniline ratio of 0.4,and an acid/aniline ratio of 9.689,along with redoped PANI nanofibers.The optimized skimmer exhibited a remarkable contact angle of 177.477°.The coating achieved drag reduction of 32%,oil absorption of 88.725%,a cost of$1.710,and a desirability rating of 78.5%.In this study,an optimized skimmer coat containing super hydrophobic coat-PANI nanofibers was fabricated.By enhancing contact angle and reducing drag,these coatings increased the skimmer performance by improving oil absorption and reducing fuel consumption.展开更多
Microglia are the macrophages that populate the brain parenchyma.Research in the past decades has identified them as both essential guardians of the brain and significant contributors to various neurological diseases....Microglia are the macrophages that populate the brain parenchyma.Research in the past decades has identified them as both essential guardians of the brain and significant contributors to various neurological diseases.A highly versatile cell type,microglia have been shown to fulfill a multitude of critical roles in the central nervous system,including facilitating neurogenesis and myelination,pruning synapses,removing debris and waste,modulating neuronal activity,supporting the blood-brain barrier,repairing tissue damage,and surveilling against microbial invasions under physiological conditions(Prinz et al.,2021;Paolicelli et al.,2022).展开更多
Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generat...Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.展开更多
AIM:To investigate the effects of shortening the duration of silicone oil tamponade on retinal structure and function in patients undergoing silicone oil removal(SOR)after surgery for primary rhegmatogenous retinal de...AIM:To investigate the effects of shortening the duration of silicone oil tamponade on retinal structure and function in patients undergoing silicone oil removal(SOR)after surgery for primary rhegmatogenous retinal detachment(RRD).METHODS:A total of 58 eligible patients were enrolled and randomly assigned to two groups based on tamponade duration:the short-term group(30-45d)and the conventional group(≥90d).Comprehensive evaluations were performed before and after SOR,including slitlamp examination,best-corrected visual acuity(BCVA)measurement,intraocular pressure(IOP)testing,optical coherence tomography(OCT),optical coherence tomography angiography(OCTA),microperimetry,electroretinography(ERG),and visual evoked potential(VEP)assessment.RESULTS:A total of 33 patients(23 males and 10 females;33 eyes)were enrolled in the short-term SO tamponade group with mean age of 52.45±9.35y,and 25 patients(15 males and 10 females;25 eyes)were enrolled in the conventional SO tamponade group with mean age of 50.80±12.06y.Compared with the conventional group,the short-term silicone oil tamponade group had a significantly lower incidence of silicone oil emulsification and cataract progression,with no significant difference in retinal reattachment success rate.Structurally,short-term tamponade was associated with increased thickness of the retinal ganglion cell layer(RGCL)in the nasal and superior macular regions and improved recovery of superficial retinal vascular density in these areas.Functionally,the shortterm group showed better BCVA and retinal sensitivity both before and 1mo after SOR;additionally,the P100 amplitude in VEP tests was significantly increased in this group.CONCLUSION:Shortening the duration of silicone oil tamponade effectively reduces damage to retinal structure and function without compromising the success rate of retinal reattachment in patients with primary RRD.展开更多
Soil greenhouse gas(GHG)emissions contribute profoundly to global warming;however,how plant detritus input alters GHG emissions is poorly understood.Here,we used detritus input and removal treatments(i.e.,DIRT:control...Soil greenhouse gas(GHG)emissions contribute profoundly to global warming;however,how plant detritus input alters GHG emissions is poorly understood.Here,we used detritus input and removal treatments(i.e.,DIRT:control,CK;double litter,DL;no roots with double litter,NRDL;no litter,NL;no roots,NR;no roots and no litter,NRNL)to assess the effects of litter and root inputs on soil CO_(2),CH_(4),and N_(2)O fluxes in soils in a coniferous(Pinus yunnanensis)and a broad-leaf forest(Quercus pannosa)in a subalpine region in southwestern China.Litter addition increased CO_(2) emissions on average 22.22%,but did not significantly alter CH_(4) uptake and N_(2)O emission compared to the CK.Litter removal(NL and NRNL)significantly reduced CO_(2) emissions on average 30.22%and N_(2)O emissions on average 31.16%from both forest soils,but did not significantly affect soil CH_(4) uptake.Root removal(NR and NRNL)generally decreased these three soil GHG fluxes.Changes inβ-1,4-glucosidase(BG)involved in C and phospholipid fatty acid(PLFAs)biomass were projected to influence CO_(2) emissions,while soil microclimates(temperature and moisture)combined with BG activity mainly regulated CH_(4) uptake.Alterations in dissolved organic nitrogen,microbial biomass nitrogen and BG were mainly responsible for changes in N_(2)O emissions.Interestingly,coniferous forest soil seemed to promote CH_(4) uptake more than the broad-leaf forest soil,but CO_(2) and N_(2)O fluxes were not significantly affected by the forest types.As expected,litter addition significantly increased the warming potential,while litter removal relatively lowered it.These findings revealed the divergent roles of plant detritus input and forest type in shaping soil GHG fluxes,thereby providing insights into forest management and predicting contributions of subalpine forests to global warming.展开更多
A temperature-sensitive mud cake remover(G315)was developed using ethyl lactate as the primary component.Based on this,a temperature-sensitive acidic completion fluid(CF-G315)was formulated.Core evaluation tests,mud c...A temperature-sensitive mud cake remover(G315)was developed using ethyl lactate as the primary component.Based on this,a temperature-sensitive acidic completion fluid(CF-G315)was formulated.Core evaluation tests,mud cake dissolution tests and corrosion tests were conducted to analyze the mud cake removal performance of G315,the removal efficiency of CF-G315,and its ability to modify the near-wellbore reservoirs,corrosion to casing and hydrolysis performance.Results indicate that ethyl lactate in G315 exhibits weak acidity at room temperature and decomposes into lactic acid under high temperatures.The lactic acid reacts with the calcium carbonate in the mud cake,generating bubbles that dislodge the mud cake and form soluble salts that are subsequently removed by fluid flow,thereby ensuring effective mud cake clearance.CF-G315 removes mud cake efficiently and enhances near-wellbore reservoir permeability.It demonstrates low corrosivity and environmental compatibility,contributing to equipment safety,simplified operational procedures and reduced operational risks.CF-G315 is promising for application in scenarios such as horizontal wells,open-hole completions and gravel pack completions.展开更多
The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and med...The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and medical sectors.However,conventional machining of titanium alloys leads to elevated tool wear,development of surface defects,and reduced machining efficiency due to their low heat conductivity,and chemical affinity.These issues can be somewhat counteracted by integrating ultrasonic vibration in the conventional machining of titanium alloys and also enhance sustainability.This review article offers a holistic evaluation of the influence of ultrasonic vibration-assisted milling and turning on cutting forces,temperature,tool wear,and surface integrity,encompassing surface morphology,surface roughness,surface residual stress,surface hardness,and surface tribological properties during titanium alloys machining.Furthermore,it investigates the sustainability aspect that has not been previously examined.Studies on the performance of ultrasonic-assisted cutting revealed several advantages,including decreased cutting forces and cutting temperature,improved tool life,and a better-machined surface during machining.Consequently,the sustainability factor is improved due to minimized energy consumption and residual waste.In conclusion,the key challenges and future prospects in the ultrasonic-assisted cutting of titanium alloys are also discussed.This review article provides beneficial knowledge for manufactur-ers and researchers regarding ultrasonic vibration-assisted cutting of titanium alloy and will play an important role in achieving sustainability in the industry.展开更多
Anaerobic ammonia oxidation(Anammox)is an economical and sustainablewastewater nitrogen removal technology,and its application in the mainstream process is the inevitable trend of the development of Anammox.However,ho...Anaerobic ammonia oxidation(Anammox)is an economical and sustainablewastewater nitrogen removal technology,and its application in the mainstream process is the inevitable trend of the development of Anammox.However,how to effectively enriching Anammox bacteria from the activated sludge remains challenging and restricts its extensive applications.In this study,the rapid and efficient enrichment of Anammox bacteriawas achieved by raising the reflux ratio and nitrogen loading rate(NLR)using conventional activated sludge as the inoculant.In the screening phase(days 1–90),the reflux ratio was increased to discharge partial floc sludge,resulting in the relative abundance of Candidatus Brocadiaceae increased from0.04%to 22.54%,which effectively reduced thematrix and spatial competition between other microorganisms and Anammox bacteria.On day 90,the stoichiometric ratio of the Anammox process closely approached the theoretical value of 1:1.32:0.26,indicating that the Anammox reaction was the primary nitrogen removal process in the system.In the enrichment phase(days 91–238),the NLR increased from 0.43 to 1.20 kgN/(m^(3)·d)and removal efficiency was 71.89%,resulting in the relative abundance of Candidatus Brocadiaceae increased to 61.27%on day 180.The reactor operated steadily from days 444 to 498,maintaining the nitrogen removal rate(NRR)of 3.00 kgN/(m^(3)·d)and achieving successful sludge granulation with the particle size of 392.4μm.In short,this study provided a simple and efficient approach for enriching Anammox bacteria from the activated sludge,supporting to start an Anammox process efficiently.展开更多
Nitrogen removal from domestic sewage is usually limited by insufficient carbon source and electron donor.An economical solid carbon source was developed by composition of polyvinyl alcohol,sodium alginate,and corncob...Nitrogen removal from domestic sewage is usually limited by insufficient carbon source and electron donor.An economical solid carbon source was developed by composition of polyvinyl alcohol,sodium alginate,and corncob,which was utilized as external carbon source in the anaerobic anoxic oxic(AAO)-biofilter for the treatment of low carbon-to-nitrogen ratio domestic sewage,and the nitrogen removal was remarkably improved from 63.2%to 96.5%.Furthermore,the effluent chemical oxygen demand maintained at 35 mg/L or even lower,and the total nitrogenwas reduced to less than 2mg/L.Metagenomic analysis demonstrated that the microbial communities responsible for potential denitrification and organic matter degradation in both AAO and the biofilter reactors were mainly composed of Proteobacteria and Bacteroides,respectively.The solid carbon source addition resulted in relatively high abundance of functional enzymes responsible for NO_(3)^(−)-N to NO_(2)^(−)-N con-version in both AAO and the biofilter reactors,thus enabled stable reaction.The carbon source addition during glycolysis primarily led to the increase of genes associated with the metabolic conversion of fructose 1.6P2 to glycerol-3P The reactor maintained high abun-dance of genes related to the tricarboxylic acid cycle,and then guaranteed efficient carbon metabolism.The results indicate that the composite carbon source is feasible for denitri-fication enhancement of AAO-biofilter,which contribute to the theoretical foundation for practical nitrogen removal application.展开更多
Microplastics(MPs),as a new category of environmental pollutant,have been the hotspot of eco-friendly issues nowadays.Studies based on the aging process,the migration pattern of MPs in runoff rainwater,and the use of ...Microplastics(MPs),as a new category of environmental pollutant,have been the hotspot of eco-friendly issues nowadays.Studies based on the aging process,the migration pattern of MPs in runoff rainwater,and the use of bioretention cells to remove MPs from runoff rainwater are beginning to attract widespread attention.This review analyses the migration patterns of MPs in rainwater runoff through their sources,structure and characteristics.The mechanism of removing MPs from runoff stormwater,the purification efficiency of different fillers and their influencing factors,and the accumulation,fate,and aging of MPs in bioretention cells are described.Furthermore,the hazards of MP accumulation on the performance of bioretention cells are summarised.Future directions for removing MPs in bioretention cells are proposed:(1)research on MPs smaller than 100μm;(2)influence of MPs aging process on bioretention cells;(3)exploration of more effective fillers to enhance their removal efficiency;(4)research on synergistic removal mechanism of MPs and other pollution.展开更多
Current research primarily focuses on emerging organic pollutants,with limited attention to emerging inorganic pollutants (EIPs).However,due to advances in detection technology and the escalating environmental and hea...Current research primarily focuses on emerging organic pollutants,with limited attention to emerging inorganic pollutants (EIPs).However,due to advances in detection technology and the escalating environmental and health challenges posed by pollution,there is a growing interest in treating waters contaminated with EIPs.This paper explores biochar characteristics and modification methods,encompassing physical,chemical,and biological approaches for adsorbing EIPs.It offers a comprehensive review of research advancements in employing biochar for EIPs remediation in water,outlines the adsorption mechanisms of EIPs by biochar,and presents an environmental and economic analysis.It can be concluded that using biochar for the adsorption of EIPs in wastewater exhibits promising potential.Nonetheless,it is noteworthy that certain EIPs like Au(III),Rh(III),Ir(III),Ru(III),Os(III),Sc(III),and Y(III),have not been extensively investigated regarding their adsorption onto biochar.This comprehensive review will catalyze further inquiry into the biochar-based adsorption of EIPs,addressing current research deficiencies and advancing the practical implementation of biochar as a potent substrate for EIP removal from wastewater streams.展开更多
基金the financial support from the Natural Science Foundation of China(Grant Nos.52222401,52234002,52394250,52394255)Science Foundation of China University of Petroleum,Beijing(Grant No.ZXZX20230083)other projects(ZLZX2020-01-07-01)。
文摘In extended-reach or long-horizontal drilling,cuttings usually deposit at the bottom of the annulus.Once cuttings accumulate to a certain thickness,complex problems such as excessive torque and drag,tubing buckling,and pipe stuck probably occur,which results in a lot of non-productive time and remedial operations.Cuttings bed remover can efficiently destroy deposited cuttings in time through hydraulic and mechanical stirring effects.This paper aims to build a method for hole cleaning evaluation and installation spacing optimization of cuttings bed remover to improve the wellbore cleaning effect.Firstly,a Computational Fluid Dynamics approach with Eulerian—Eulerian multiphase model was utilized to investigate the mechanism of cuttings transportation,and a new type of cuttings bed remover was designed.Next,an evaluation method of hole cleaning effect of remover was established.After that,the effects of several drilling parameters on hole cleaning including flow rate of drilling fluid,rotational speed of drillpipe,rate of penetration,wellbore size,rheological property of drilling fluid,and remover eccentricity on the performance of cuttings bed remover were investigated.The results demonstrate that the new type of remover with streamline blade performs better than conventional removers.The efficiency of hole cleaning is greatly improved by increasing the rotational speed of drillpipe,flow rate of drilling fluid,remover eccentricity,and 6 rpm Fann dial reading for drilling fluid.While higher rate of penetration and large wellbore size result in worse hole cleaning.These findings can serve as an important guide for the structure optimization design of cuttings bed remover and installation spacing of removers.
基金Project supported by the National Major Science and Technology Project“Research and application of key technologies for factory-like well drilling”(No.:2016ZX05022-001)the National Major Science and Technology Project“Test and application of 3-D optimized and fast drilling technology for cluster horizontal well in shale gas reservoirs”(No.:2016ZX05062003)CNPC Major Scientific Research and Technical Development Project“Integration and demonstration of drilling speed/efficiency improvement technologies for deep well and horizontal well”(No.:2018E-2108)。
文摘Cuttings accumulation in horizontal drilling of a shale gas well is one of the main reasons for high drilling torque and drag and serious backing pressure and consequently influencing the rate of penetration(ROP),so inhibiting the generation of a cuttings bed and keeping the hole clean is an important prerequisite to ensure the smooth and safe drilling of horizontal section.In order to improve the hole cleaning efficiency of horizontal sections,this paper studied the decay laws of helical flow induced by helix angles and rotation speed of a newly developed cuttings bed remover with V-shaped blades for horizontal wells and their influences on the resuspension distribution of cuttings particles by virtue of the CFD numerical simulation method and EulereEuler binary-fluid model,combined with the theory of particle dynamics.Then,the parameters such as blade rotation speed and blade helix angle were optimized.And the following research results were obtained.First,with the increase of the rotation speed,cuttings deposit at the bottom of the annulus deflects to a certain degree.And the higher the rotation speed,the more obvious the deflection.Second,annulus pressure drop loss increases with the increase of the helix angle.And this phenomenon is more obvious when the helix angle is larger.Third,the field test results in Well Changning H25-7 of the southern Sichuan Basin show that after the application of the newly developed cuttings bed remover for horizontal wells,the drilling friction is decreased by 33%,the tripping is smooth without sticking.And in the process of its application,no complex downhole accident happened.Obviously,it provides good hole cleaning to ensure the safe and smooth implementation of the later casing running operation.In conclusion,this newly developed cuttings bed remover can satisfy the demand of cutting bed cleaning and drilling cost reduction and efficiency improvement of horizontal wells,so it is worth popularizing and applying.What's more,it provides guidance and reference for the design of similar cuttings bed removers.
文摘In order to solve the problem of limited makeup removal ability of a single surfactant of Peg-20 glyceryl triisostearate in makeup remover,an efficient system was prepared which contained PEG-20 glyceryl triisostearate and a combination of Sorbeth-30 tetraoleate and Peg-5 glyceryl triisostearate.Leather test,skin colorimeter test and consumer self-evaluation were used to assess the makeup removal ability,rinsing performance and softness skin feel of the efficient makeup remover base.The results showed that a 7%combination of Sorbeth-30 tetraoleate and PEG-5 glyceryl triisostearate could significantly improve the comprehensive performance of single PEG-20 glyceryl triisostearate makeup remover system,furthermore,they performed best at the ratio of 6:1.We hope the findings can have guiding significance for the development of makeup remover products.
基金The work is supported by National Science and Technology Major Project of the Ministry of Science and Technology of China“High Efficiency Oil Production and Supporting Technology Demonstration on Bohai Oilfield”(No.2016ZX05058-003).
文摘With the extensive application of polymer flooding technology in offshore oilfields,the plugging in polymer injection wells has become more and more severe,which seriously affects the oil displacement effect and regular production of oilfields.In this paper,a new kind of blockage remover has been developed and evaluated by rheological behavior experiments,dissolution experiments and core flooding experiments.The results reveal that this new blockage remover can effectively reduce the viscosity of polymer and completely degrade the reservoir blockage with low corrosion rate.It is beneficial to long-term production of oil wells in offshore oilfield.Results of core flooding experiments show that this new blockage remover can relieve polymer damage and improve permeability.The agent has been applied in LD10-1 oilfield in 2016,the daily injection rate increased significantly after stimulation.
文摘It is crucial to develop arsenic removal adsorbents with strong sulfur resistance under middle-low-temperature flue gas conditions(<400℃).In this work,five Fe-Ce-La oxides were prepared by co-precipitation method,and FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbents were prepared by coupling fly ash-based Si-Al carriers.The active components Fe-Ce-La oxides and Si-Al carriers were characterized by TPD,TG,XRF,BET and XPS,respectively.The effects of temperature,Si/Al ratio and FeCeLaO loading rate on the sulfur resistance were investigated.Results show that the SO_(2) promotes the arsenic removal of Fe_(2)O_(3),CeLaO and FeCeLaO.At 400℃,the arsenic removal efficiencies of the three oxides increase from 45.3%,72.5% and 81.3% without SO_(2) to 62.6%,80.5%and 91.0%,respectively.The SO_(2) inhibits the arsenic removal of La_(2)O_(2)CO_(3) and FeLaO,and the inhibition effect is pronounced at high temperatures.The sulfur poisoning resistance of Si-Al carriers increases with the increase of Si/Al ratio.When the Si/Al ratio is increased to 9.74,the arsenic removal efficiency in the SO_(2) environment is 13.9% higher than that in the absence of SO_(2).Introducing FeCeLaO active components is beneficial for enhancing the SO_(2) poisoning resistance of Si-Al carriers.The strong sulfur resistance of the FeCeLaO/SiO_(2)-Al_(2)O_(3) composite adsorbent results from multiple factors:protective effects of Ce on Fe,La and Al;sulfation-induced generation of Ce^(3+)and surface-adsorbed oxygen;and strong surface acidity of SiO_(2).
基金supported by the Fundamental Research Funds for the Central Publicinterest Scientific Institution(No.2024YSKY-44)the National Key R&D Program of China(No.2023YFC3708003).
文摘To address the problems with catalytic degradation,such as poisoning and inactivation,a simple and efficient gas purging regeneration technique was developed for iron-based catalyst in-situ regeneration.Specifically,the effects of carrier gas types,regeneration temperatures,and granular activated carbon(GAC)addition on iron-based catalyst regeneration were investigated.The Fe_(3)O_(4)/𝛾-Al_(2)O_(3) regenerated at 550°C with additional GAC and 15%water vapor exhibited the optimal degradation efficiency towards polychlorinated biphenyls(PCBs),with an increase from 41.2%to 93.5%,compared with non-regenerated Fe_(3)O_(4)/𝛾-Al_(2)O_(3).In addition,the 60-hour stability test revealed a well-recovered catalytic activity.During the Fe_(3)O_(4)/𝛾-Al_(2)O_(3) regeneration,the coke on the catalyst surface was oxidized and removed in the form of CO_(2),and meanwhile the oxidized Fe(III)was reduced into Fe(II)in the catalyst.This study provides a safe and efficient iron-based catalyst regeneration technology for PCB off-gas degradation and reveals the catalytic activity recovery mechanism during catalyst regeneration.
文摘Environmental pollution,energy consumption,and greenhouse gas emissions are critical global issues.To address these challenges,optimizing skimmer coatings is a major step in commercializing cleaning oil stains.This research presents a novel approach to creating and refining oil absorbent coatings,introducing a unique oil spill removal skimmer enhanced with a super hydrophobic polyaniline(PANI)nanofiber coating.The goal of this study was to improve oil absorption performance,increase the contact angle,lower drag,reduce energy consumption,achieve high desirability,and lower production costs.PANI treated with hydrochloric acid was a key focus as it resulted in higher porosity and smaller pore diameters,providing a larger surface area,which are crucial factors for boosting oil absorption and minimizing drag.To optimize optimal nanofiber morphology,PANI synthesized with methanesulfonic acid was first dedoped and then redoped with hydrochloric acid.After optimization,the most effective skimmer coating was achieved using a formulation consisting of 0.1%PANI,an ammonium persulfate/aniline ratio of 0.4,and an acid/aniline ratio of 9.689,along with redoped PANI nanofibers.The optimized skimmer exhibited a remarkable contact angle of 177.477°.The coating achieved drag reduction of 32%,oil absorption of 88.725%,a cost of$1.710,and a desirability rating of 78.5%.In this study,an optimized skimmer coat containing super hydrophobic coat-PANI nanofibers was fabricated.By enhancing contact angle and reducing drag,these coatings increased the skimmer performance by improving oil absorption and reducing fuel consumption.
基金funded by NIH grants HL154720-03S1, AG057587, AG074283, DK122708-03S1, BrightFocus ADR A20183775Brown Foundation 2020 Healthy Aging Initiative (to WC)
文摘Microglia are the macrophages that populate the brain parenchyma.Research in the past decades has identified them as both essential guardians of the brain and significant contributors to various neurological diseases.A highly versatile cell type,microglia have been shown to fulfill a multitude of critical roles in the central nervous system,including facilitating neurogenesis and myelination,pruning synapses,removing debris and waste,modulating neuronal activity,supporting the blood-brain barrier,repairing tissue damage,and surveilling against microbial invasions under physiological conditions(Prinz et al.,2021;Paolicelli et al.,2022).
基金financial support from the Nuclear Energy Science&Technology and Human Resource Development Project of the Japan Atomic Energy Agency/Collaborative Laboratories for Advanced Decommissioning Science(No.R04I034)The author Ruicong Xu appreciates the scholarship(financial support)from the China Scholarship Council(CSC,No.202106380073).
文摘Laser-induced aerosols,predominantly submicron in size,pose significant environmental and health risks during the decommissioning of nuclear reactors.This study experimentally investigated the removal of laser-generated aerosol particles using a water spray system integrated with an innovative system for pre-injecting electrically charged mist in our facility.To simulate aerosol generation in reactor decommissioning,a high-power laser was used to irradiate various materials(including stainless steel,carbon steel,and concrete),generating aerosol particles that were agglomerated with injected water mist and subsequently scavenged by water spray.Experimental results demonstrate enhanced aerosol removal via aerosol-mist agglomeration,with charged mist significantly improving particle capture by increasing wettability and size.The average improvements for the stainless steel,carbon steel,and concrete were 40%,44%,and 21%,respectively.The results of experiments using charged mist with different polarities(both positive and negative)and different surface coatings reveal that the dominant polarity of aerosols varies with the irradiated materials,influenced by their crystal structure and electron emission properties.Notably,surface coatings such as ZrO_(2)and CeO_(2)were found to possibly alter aerosol charging characteristics,thereby affecting aerosol removal efficiency with charged mist configurations.The innovative aerosol-mist agglomeration approach shows promise in mitigating radiation exposure,ensuring environmental safety,and reducing contaminated water during reactor dismantling.This study contributes critical knowledge for the development of advanced aerosol management strategies for nuclear reactor decommissioning.The understanding obtained in this work is also expected to be useful for various environmental and chemical engineering applications such as gas decontamination,air purification,and pollution control.
基金Supported by the Key Science&Technology Project of Guangzhou(No.202103000045)the National Natural Science Foundation of China(No.82070972,No.82271093).
文摘AIM:To investigate the effects of shortening the duration of silicone oil tamponade on retinal structure and function in patients undergoing silicone oil removal(SOR)after surgery for primary rhegmatogenous retinal detachment(RRD).METHODS:A total of 58 eligible patients were enrolled and randomly assigned to two groups based on tamponade duration:the short-term group(30-45d)and the conventional group(≥90d).Comprehensive evaluations were performed before and after SOR,including slitlamp examination,best-corrected visual acuity(BCVA)measurement,intraocular pressure(IOP)testing,optical coherence tomography(OCT),optical coherence tomography angiography(OCTA),microperimetry,electroretinography(ERG),and visual evoked potential(VEP)assessment.RESULTS:A total of 33 patients(23 males and 10 females;33 eyes)were enrolled in the short-term SO tamponade group with mean age of 52.45±9.35y,and 25 patients(15 males and 10 females;25 eyes)were enrolled in the conventional SO tamponade group with mean age of 50.80±12.06y.Compared with the conventional group,the short-term silicone oil tamponade group had a significantly lower incidence of silicone oil emulsification and cataract progression,with no significant difference in retinal reattachment success rate.Structurally,short-term tamponade was associated with increased thickness of the retinal ganglion cell layer(RGCL)in the nasal and superior macular regions and improved recovery of superficial retinal vascular density in these areas.Functionally,the shortterm group showed better BCVA and retinal sensitivity both before and 1mo after SOR;additionally,the P100 amplitude in VEP tests was significantly increased in this group.CONCLUSION:Shortening the duration of silicone oil tamponade effectively reduces damage to retinal structure and function without compromising the success rate of retinal reattachment in patients with primary RRD.
基金supported by the National Natural Science Foundation of China(32130069)the National Key Research and Development Program of China(2024YFF1306700)the Scientific Research Foundation of Education Department of Yunnan Province(2024Y004).
文摘Soil greenhouse gas(GHG)emissions contribute profoundly to global warming;however,how plant detritus input alters GHG emissions is poorly understood.Here,we used detritus input and removal treatments(i.e.,DIRT:control,CK;double litter,DL;no roots with double litter,NRDL;no litter,NL;no roots,NR;no roots and no litter,NRNL)to assess the effects of litter and root inputs on soil CO_(2),CH_(4),and N_(2)O fluxes in soils in a coniferous(Pinus yunnanensis)and a broad-leaf forest(Quercus pannosa)in a subalpine region in southwestern China.Litter addition increased CO_(2) emissions on average 22.22%,but did not significantly alter CH_(4) uptake and N_(2)O emission compared to the CK.Litter removal(NL and NRNL)significantly reduced CO_(2) emissions on average 30.22%and N_(2)O emissions on average 31.16%from both forest soils,but did not significantly affect soil CH_(4) uptake.Root removal(NR and NRNL)generally decreased these three soil GHG fluxes.Changes inβ-1,4-glucosidase(BG)involved in C and phospholipid fatty acid(PLFAs)biomass were projected to influence CO_(2) emissions,while soil microclimates(temperature and moisture)combined with BG activity mainly regulated CH_(4) uptake.Alterations in dissolved organic nitrogen,microbial biomass nitrogen and BG were mainly responsible for changes in N_(2)O emissions.Interestingly,coniferous forest soil seemed to promote CH_(4) uptake more than the broad-leaf forest soil,but CO_(2) and N_(2)O fluxes were not significantly affected by the forest types.As expected,litter addition significantly increased the warming potential,while litter removal relatively lowered it.These findings revealed the divergent roles of plant detritus input and forest type in shaping soil GHG fluxes,thereby providing insights into forest management and predicting contributions of subalpine forests to global warming.
基金Supported by National Natural Science Foundation of China(52404010).
文摘A temperature-sensitive mud cake remover(G315)was developed using ethyl lactate as the primary component.Based on this,a temperature-sensitive acidic completion fluid(CF-G315)was formulated.Core evaluation tests,mud cake dissolution tests and corrosion tests were conducted to analyze the mud cake removal performance of G315,the removal efficiency of CF-G315,and its ability to modify the near-wellbore reservoirs,corrosion to casing and hydrolysis performance.Results indicate that ethyl lactate in G315 exhibits weak acidity at room temperature and decomposes into lactic acid under high temperatures.The lactic acid reacts with the calcium carbonate in the mud cake,generating bubbles that dislodge the mud cake and form soluble salts that are subsequently removed by fluid flow,thereby ensuring effective mud cake clearance.CF-G315 removes mud cake efficiently and enhances near-wellbore reservoir permeability.It demonstrates low corrosivity and environmental compatibility,contributing to equipment safety,simplified operational procedures and reduced operational risks.CF-G315 is promising for application in scenarios such as horizontal wells,open-hole completions and gravel pack completions.
基金financially supported by the National Natural Science Foundation of China(Nos.92160301,92060203,52175415 and 52205475)the Science Center for Gas Turbine Project(No.P2023-B-IV-003-001)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20210295)the Huaqiao University Engineering Research Center of Brittle Materials Machining(MOE,2023IME-001)。
文摘The remarkable ability of titanium alloys to preserve their superior physical and chemical characteristics when subjected to extreme conditions significantly enhances their importance in the aerospace,military,and medical sectors.However,conventional machining of titanium alloys leads to elevated tool wear,development of surface defects,and reduced machining efficiency due to their low heat conductivity,and chemical affinity.These issues can be somewhat counteracted by integrating ultrasonic vibration in the conventional machining of titanium alloys and also enhance sustainability.This review article offers a holistic evaluation of the influence of ultrasonic vibration-assisted milling and turning on cutting forces,temperature,tool wear,and surface integrity,encompassing surface morphology,surface roughness,surface residual stress,surface hardness,and surface tribological properties during titanium alloys machining.Furthermore,it investigates the sustainability aspect that has not been previously examined.Studies on the performance of ultrasonic-assisted cutting revealed several advantages,including decreased cutting forces and cutting temperature,improved tool life,and a better-machined surface during machining.Consequently,the sustainability factor is improved due to minimized energy consumption and residual waste.In conclusion,the key challenges and future prospects in the ultrasonic-assisted cutting of titanium alloys are also discussed.This review article provides beneficial knowledge for manufactur-ers and researchers regarding ultrasonic vibration-assisted cutting of titanium alloy and will play an important role in achieving sustainability in the industry.
基金supported by the National Natural Science Foundation of China(No.52070149)Shaanxi Innovative Research Team for Key Science and Technology(No.2023-CXTD-36)+1 种基金Shaanxi Province Key Program for International S&T Cooperation Projects(No.2024GH-ZDXM-04)the Bureau of Science and Technology of Xi’an City of China(No.23SFSF0011).
文摘Anaerobic ammonia oxidation(Anammox)is an economical and sustainablewastewater nitrogen removal technology,and its application in the mainstream process is the inevitable trend of the development of Anammox.However,how to effectively enriching Anammox bacteria from the activated sludge remains challenging and restricts its extensive applications.In this study,the rapid and efficient enrichment of Anammox bacteriawas achieved by raising the reflux ratio and nitrogen loading rate(NLR)using conventional activated sludge as the inoculant.In the screening phase(days 1–90),the reflux ratio was increased to discharge partial floc sludge,resulting in the relative abundance of Candidatus Brocadiaceae increased from0.04%to 22.54%,which effectively reduced thematrix and spatial competition between other microorganisms and Anammox bacteria.On day 90,the stoichiometric ratio of the Anammox process closely approached the theoretical value of 1:1.32:0.26,indicating that the Anammox reaction was the primary nitrogen removal process in the system.In the enrichment phase(days 91–238),the NLR increased from 0.43 to 1.20 kgN/(m^(3)·d)and removal efficiency was 71.89%,resulting in the relative abundance of Candidatus Brocadiaceae increased to 61.27%on day 180.The reactor operated steadily from days 444 to 498,maintaining the nitrogen removal rate(NRR)of 3.00 kgN/(m^(3)·d)and achieving successful sludge granulation with the particle size of 392.4μm.In short,this study provided a simple and efficient approach for enriching Anammox bacteria from the activated sludge,supporting to start an Anammox process efficiently.
基金supported by the Special Funds for Chengde national innovation demonstration area construction of science and technology special project sustainable development agenda(No.202104F001)the National Basic Research Program of China(No.2019YFC0408602).
文摘Nitrogen removal from domestic sewage is usually limited by insufficient carbon source and electron donor.An economical solid carbon source was developed by composition of polyvinyl alcohol,sodium alginate,and corncob,which was utilized as external carbon source in the anaerobic anoxic oxic(AAO)-biofilter for the treatment of low carbon-to-nitrogen ratio domestic sewage,and the nitrogen removal was remarkably improved from 63.2%to 96.5%.Furthermore,the effluent chemical oxygen demand maintained at 35 mg/L or even lower,and the total nitrogenwas reduced to less than 2mg/L.Metagenomic analysis demonstrated that the microbial communities responsible for potential denitrification and organic matter degradation in both AAO and the biofilter reactors were mainly composed of Proteobacteria and Bacteroides,respectively.The solid carbon source addition resulted in relatively high abundance of functional enzymes responsible for NO_(3)^(−)-N to NO_(2)^(−)-N con-version in both AAO and the biofilter reactors,thus enabled stable reaction.The carbon source addition during glycolysis primarily led to the increase of genes associated with the metabolic conversion of fructose 1.6P2 to glycerol-3P The reactor maintained high abun-dance of genes related to the tricarboxylic acid cycle,and then guaranteed efficient carbon metabolism.The results indicate that the composite carbon source is feasible for denitri-fication enhancement of AAO-biofilter,which contribute to the theoretical foundation for practical nitrogen removal application.
基金supported by the National Natural Science Foundation of China(No.52070152).
文摘Microplastics(MPs),as a new category of environmental pollutant,have been the hotspot of eco-friendly issues nowadays.Studies based on the aging process,the migration pattern of MPs in runoff rainwater,and the use of bioretention cells to remove MPs from runoff rainwater are beginning to attract widespread attention.This review analyses the migration patterns of MPs in rainwater runoff through their sources,structure and characteristics.The mechanism of removing MPs from runoff stormwater,the purification efficiency of different fillers and their influencing factors,and the accumulation,fate,and aging of MPs in bioretention cells are described.Furthermore,the hazards of MP accumulation on the performance of bioretention cells are summarised.Future directions for removing MPs in bioretention cells are proposed:(1)research on MPs smaller than 100μm;(2)influence of MPs aging process on bioretention cells;(3)exploration of more effective fillers to enhance their removal efficiency;(4)research on synergistic removal mechanism of MPs and other pollution.
基金support from the earmarked fund for XJARS(No.XJARS-06)the Bingtuan Science and Technology Program(Nos.2021DB019,2022CB001-01)+1 种基金the National Natural Science Foundation of China(No.42275014)the Guangdong Foundation for Program of Science and Technology Research,China(No.2023B1212060044)。
文摘Current research primarily focuses on emerging organic pollutants,with limited attention to emerging inorganic pollutants (EIPs).However,due to advances in detection technology and the escalating environmental and health challenges posed by pollution,there is a growing interest in treating waters contaminated with EIPs.This paper explores biochar characteristics and modification methods,encompassing physical,chemical,and biological approaches for adsorbing EIPs.It offers a comprehensive review of research advancements in employing biochar for EIPs remediation in water,outlines the adsorption mechanisms of EIPs by biochar,and presents an environmental and economic analysis.It can be concluded that using biochar for the adsorption of EIPs in wastewater exhibits promising potential.Nonetheless,it is noteworthy that certain EIPs like Au(III),Rh(III),Ir(III),Ru(III),Os(III),Sc(III),and Y(III),have not been extensively investigated regarding their adsorption onto biochar.This comprehensive review will catalyze further inquiry into the biochar-based adsorption of EIPs,addressing current research deficiencies and advancing the practical implementation of biochar as a potent substrate for EIP removal from wastewater streams.
