In this paper a recursive state-space model identification method is proposed for non-uniformly sampled systems in industrial applications. Two cases for measuring all states and only output(s) of such a system are co...In this paper a recursive state-space model identification method is proposed for non-uniformly sampled systems in industrial applications. Two cases for measuring all states and only output(s) of such a system are considered for identification. In the case of state measurement, an identification algorithm based on the singular value decomposition(SVD) is developed to estimate the model parameter matrices by using the least-squares fitting. In the case of output measurement only, another identification algorithm is given by combining the SVD approach with a hierarchical identification strategy. An example is used to demonstrate the effectiveness of the proposed identification method.展开更多
Based on Recursive Radial Basis Function(RRBF)neural network,the Reduced Order Model(ROM)of compressor cascade was established to meet the urgent demand of highly efficient prediction of unsteady aerodynamics performa...Based on Recursive Radial Basis Function(RRBF)neural network,the Reduced Order Model(ROM)of compressor cascade was established to meet the urgent demand of highly efficient prediction of unsteady aerodynamics performance of turbomachinery.One novel ROM called ASA-RRBF model based on Adaptive Simulated Annealing(ASA)algorithm was developed to enhance the generalization ability of the unsteady ROM.The ROM was verified by predicting the unsteady aerodynamics performance of a highly-loaded compressor cascade.The results show that the RRBF model has higher accuracy in identification of the dimensionless total pressure and dimensionless static pressure of compressor cascade under nonlinear and unsteady conditions,and the model behaves higher stability and computational efficiency.However,for the strong nonlinear characteristics of aerodynamic parameters,the RRBF model presents lower accuracy.Additionally,the RRBF model predicts with a large error in the identification of aerodynamic parameters under linear and unsteady conditions.For ASA-RRBF,by introducing a small-amplitude and highfrequency sinusoidal signal as validation sample,the width of the basis function of the RRBF model is optimized to improve the generalization ability of the ROM under linear unsteady conditions.Besides,this model improves the predicting accuracy of dimensionless static pressure which has strong nonlinear characteristics.The ASA-RRBF model has higher prediction accuracy than RRBF model without significantly increasing the total time consumption.This novel model can predict the linear hysteresis of dimensionless static pressure happened in the harmonic condition,but it cannot accurately predict the beat frequency of dimensionless total pressure.展开更多
The strap-down inertial navigation system (SINS) error of ballistic missile is generated by the mutual influence of gyroscope and accelerometer, and the recursive model is completely different from that of gimbaled IN...The strap-down inertial navigation system (SINS) error of ballistic missile is generated by the mutual influence of gyroscope and accelerometer, and the recursive model is completely different from that of gimbaled INS. In the paper, a discrete error recursive model was obtained by studying the applied SINS error model of ballistic missile, and the discrete Kalman filtering simulation based on the model was carried out. The simulated results show that the model can depict the SINS error exactly and provide the advantages for research on integrated guidance and improved hit accuracy.展开更多
Kalman filter is commonly used in data filtering and parameters estimation of nonlinear system,such as projectile's trajectory estimation and control.While there is a drawback that the prior error covariance matri...Kalman filter is commonly used in data filtering and parameters estimation of nonlinear system,such as projectile's trajectory estimation and control.While there is a drawback that the prior error covariance matrix and filter parameters are difficult to be determined,which may result in filtering divergence.As to the problem that the accuracy of state estimation for nonlinear ballistic model strongly depends on its mathematical model,we improve the weighted least squares method(WLSM)with minimum model error principle.Invariant embedding method is adopted to solve the cost function including the model error.With the knowledge of measurement data and measurement error covariance matrix,we use gradient descent algorithm to determine the weighting matrix of model error.The uncertainty and linearization error of model are recursively estimated by the proposed method,thus achieving an online filtering estimation of the observations.Simulation results indicate that the proposed recursive estimation algorithm is insensitive to initial conditions and of good robustness.展开更多
A new recursive algorithm of multi variable time varying AR model is proposed. By changing the form of AR model, the parameter estimation can be regarded as state estimation of state equations. Then the Kalman filte...A new recursive algorithm of multi variable time varying AR model is proposed. By changing the form of AR model, the parameter estimation can be regarded as state estimation of state equations. Then the Kalman filter is used to estimate the variation of展开更多
In this article, the problem on the estimation of the convolution model parameters is considered. The recursive algorithm for estimating model parameters is introduced from the orthogonal procedure of the data, the co...In this article, the problem on the estimation of the convolution model parameters is considered. The recursive algorithm for estimating model parameters is introduced from the orthogonal procedure of the data, the convergence of this algorithm is theoretically discussed, and a sufficient condition for the convergence criterion of the orthogonal procedure is given. According to this condition, the recursive algorithm is convergent to model wavelet A- = （1, α1,..., αq）.展开更多
Theoretical results related to properties of a regularized recursive algorithm for estimation of a high dimensional vector of parameters are presented and proved. The recursive character of the procedure is proposed t...Theoretical results related to properties of a regularized recursive algorithm for estimation of a high dimensional vector of parameters are presented and proved. The recursive character of the procedure is proposed to overcome the difficulties with high dimension of the observation vector in computation of a statistical regularized estimator. As to deal with high dimension of the vector of unknown parameters, the regularization is introduced by specifying a priori non-negative covariance structure for the vector of estimated parameters. Numerical example with Monte-Carlo simulation for a low-dimensional system as well as the state/parameter estimation in a very high dimensional oceanic model is presented to demonstrate the efficiency of the proposed approach.展开更多
The present work is much motivated by finding an explicit way in the construction of the Jack symmetric function,which is the spectrum generating function for the Calogero-Sutherland (CS) model.To accomplish this work...The present work is much motivated by finding an explicit way in the construction of the Jack symmetric function,which is the spectrum generating function for the Calogero-Sutherland (CS) model.To accomplish this work,the hidden Virasoro structure in the CS model is much explored.In particular,we found that the Virasoro singular vectors form a skew hierarchy in the CS model.Literally,skew is analogous to coset,but here specifically refer to the operation on the Young tableaux.In fact,based on the construction of the Virasoro singular vectors,this hierarchical structure can be used to give a complete construction of the CS states,i.e.the Jack symmetric functions,recursively.The construction is given both in operator formalism as well as in integral representation.This new integral representation for the Jack symmetric functions may shed some insights on the spectrum constructions for the other integrable systems.展开更多
Recursive formulations have significantly helped in achieving real-time computations and model-based control laws. The recursive dynamics simulator （ReDySim） is a MATLAB-based recur- sive solver for dynamic analysis...Recursive formulations have significantly helped in achieving real-time computations and model-based control laws. The recursive dynamics simulator （ReDySim） is a MATLAB-based recur- sive solver for dynamic analysis of multibody systems. ReDySim delves upon the decoupled natural orthogonal complement approach originally developed for serial-chain manipulators. In comparison to the commercially available software, dynamic analyses in ReDySim can be performed without creating solid model. The input parameters are specified in MATLAB environment. ReDySim has capability to incorporate any control algorithm with utmost ease. In this work, the capabilities of ReDySim for solving open-loop and closed-loop systems are shown by examples of robotic gripper, KUKA KR5 industrial manipulator and four-bar mechanism. ReDySim can be downloaded for free from http：//www.redysim.co.nr and can be used almost instantly.展开更多
A polynomial model, time origin shifting model(TOSM, is used to describe the trajectory of a moving target .Based on TOSM, a recursive laeast squares(RLS) algorithm with varied forgetting factor is derived for tracki...A polynomial model, time origin shifting model(TOSM, is used to describe the trajectory of a moving target .Based on TOSM, a recursive laeast squares(RLS) algorithm with varied forgetting factor is derived for tracking of a non-maneuvering target. In order to apply this algorithm to maneuvering targets tracking ,a tracking signal is performed on-line to determine what kind of TOSm will be in effect to track a target with different dynamics. An effective multiple model least squares filtering and forecasting method dadpted to real tracking of a maneuvering target is formulated. The algorithm is computationally more effcient than Kalman filter and the percentage improvement from simulations show both of them are considerably alike to some extent.展开更多
A two-dimensional （2-D） polynomial regression model is set up to approximate the time-frequency response of slowly time-varying orthogonal frequency-division multiplexing （OFDM） systems. With this model the estima...A two-dimensional （2-D） polynomial regression model is set up to approximate the time-frequency response of slowly time-varying orthogonal frequency-division multiplexing （OFDM） systems. With this model the estimation of the OFDM time-frequency response is turned into the optimization of some time-invariant model parameters. A new algorithm based on the expectation-maximization （EM） method is proposed to obtain the maximum-likelihood （ML） estimation of the polynomial model parameters over the 2-D observed data. At the same time, in order to reduce the complexity and avoid the computation instability, a novel recursive approach （RPEMTO） is given to calculate the values of the parameters. It is further shown that this 2-D polynomial EM-based algorithm for time-varying OFDM （PEMTO） can be simplified mathematically to handle the one-dimensional sequential estimation. Simulations illustrate that the proposed algorithms achieve a lower bit error rate （BER） than other blind algorithms.展开更多
Based on analyzing the limitations of the commonly used back-propagation neural network （BPNN）, a wavelet neural network （WNN） is adopted as the nonlinear river channel flood forecasting method replacing the BPNN....Based on analyzing the limitations of the commonly used back-propagation neural network （BPNN）, a wavelet neural network （WNN） is adopted as the nonlinear river channel flood forecasting method replacing the BPNN. The WNN has the characteristics of fast convergence and improved capability of nonlinear approximation. For the purpose of adapting the timevarying characteristics of flood routing, the WNN is coupled with an AR real-time correction model. The AR model is utilized to calculate the forecast error. The coefficients of the AR real-time correction model are dynamically updated by an adaptive fading factor recursive least square（RLS） method. The application of the flood forecasting method in the cross section of Xijiang River at Gaoyao shows its effectiveness.展开更多
Electro-hydraulic control systems are nonlinear in nature and their mathematic models have unknown parameters. Existing research of modeling and identification of the electro-hydraulic control system is mainly based o...Electro-hydraulic control systems are nonlinear in nature and their mathematic models have unknown parameters. Existing research of modeling and identification of the electro-hydraulic control system is mainly based on theoretical state space model, and the parameters identification is hard due to its demand on internal states measurement. Moreover, there are also some hard-to-model nonlinearities in theoretical model, which needs to be overcome. Modeling and identification of the electro-hydraulic control system of an excavator arm based on block-oriented nonlinear（BONL） models is investigated. The nonlinear state space model of the system is built first, and field tests are carried out to reveal the nonlinear characteristics of the system. Based on the physic insight into the system, three BONL models are adopted to describe the highly nonlinear system. The Hammerstein model is composed of a two-segment polynomial nonlinearity followed by a linear dynamic subsystem. The Hammerstein-Wiener（H-W） model is represented by the Hammerstein model in cascade with another single polynomial nonlinearity. A novel Pseudo-Hammerstein-Wiener（P-H-W） model is developed by replacing the single polynomial of the H-W model by a non-smooth backlash function. The key term separation principle is applied to simplify the BONL models into linear-in-parameters struc^tres. Then, a modified recursive least square algorithm（MRLSA） with iterative estimation of internal variables is developed to identify the all the parameters simultaneously. The identification results demonstrate that the BONL models with two-segment polynomial nonlinearities are able to capture the system behavior, and the P-H-W model has the best prediction accuracy. Comparison experiments show that the velocity prediction error of the P-H-W model is reduced by 14%, 30% and 75% to the H-W model, Hammerstein model, and extended auto-regressive （ARX） model, respectively. This research is helpful in controller design, system monitoring and diagnosis.展开更多
A multi-loop adaptive internal model control (IMC) strategy based on a dynamic partial least squares (PLS) frame-work is proposed to account for plant model errors caused by slow aging,drift in operational conditions,...A multi-loop adaptive internal model control (IMC) strategy based on a dynamic partial least squares (PLS) frame-work is proposed to account for plant model errors caused by slow aging,drift in operational conditions,or environmental changes.Since PLS decomposition structure enables multi-loop controller design within latent spaces,a multivariable adaptive control scheme can be converted easily into several independent univariable control loops in the PLS space.In each latent subspace,once the model error exceeds a specific threshold,online adaptation rules are implemented separately to correct the plant model mismatch via a recursive least squares (RLS) algorithm.Because the IMC extracts the inverse of the minimum part of the internal model as its structure,the IMC controller is self-tuned by explicitly updating the parameters,which are parts of the internal model.Both parameter convergence and system stability are briefly analyzed,and proved to be effective.Finally,the proposed control scheme is tested and evaluated using a widely-used benchmark of a multi-input multi-output (MIMO) system with pure delay.展开更多
In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive fun...In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive functional control(AFPFC) scheme for multivariable nonlinear systems was proposed.Firstly,multivariable nonlinear systems were described based on Takagi-Sugeno(T-S) fuzzy models;assuming that the antecedent parameters of T-S models were kept,the consequent parameters were identified on-line by using the weighted recursive least square(WRLS) method.Secondly,the identified T-S models were linearized to be time-varying state space model at each sampling instant.Finally,by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established.The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015;the tracking ability of the proposed AFPFC is superior to that of non-AFPFC(NAFPFC) for pH process without disturbances,the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC;when the process parameters of AFPFC vary with time the integrated absolute error(IAE) performance index still retains to be less than 200 compared with that of NAFPFC.展开更多
The output feedback model predictive control(MPC),for a linear parameter varying(LPV) process system including unmeasurable model parameters and disturbance(all lying in known polytopes),is considered.Some previously ...The output feedback model predictive control(MPC),for a linear parameter varying(LPV) process system including unmeasurable model parameters and disturbance(all lying in known polytopes),is considered.Some previously developed tools,including the norm-bounding technique for relaxing the disturbance-related constraint handling,the dynamic output feedback law,the notion of quadratic boundedness for specifying the closed-loop stability,and the ellipsoidal state estimation error bound for guaranteeing the recursive feasibility,are merged in the control design.Some previous approaches are shown to be the special cases.An example of continuous stirred tank reactor(CSTR) is given to show the effectiveness of the proposed approaches.展开更多
This paper presents a novel approach to structure determination of linear systems along with the choice of system orders and parameters. AutoRegressive （AR）, Moving Average （MA） or AutoRegressive-Moving Average （...This paper presents a novel approach to structure determination of linear systems along with the choice of system orders and parameters. AutoRegressive （AR）, Moving Average （MA） or AutoRegressive-Moving Average （ARMA） model structure can be extracted blindly from the Third Order Cumulants （TOC） of the system output ts, where the unknown system is driven by an unobservable stationary independent identically distributed （i.i.d.） non-Gaussian signal. By means of the system order recursion, whether the system has an AR structure or has AR part of an ARMA structure is firstly investigated. MA features in the TOC domain is then applied as a threshold to decide if the system is an MA model or has MA part of an ARMA model. Numerical simulations illustrate the generality of the proposed blind structure identification methodology that may serve as a guideline for blind, linear system modeling.展开更多
In this paper, we made a new breakthrough, which proposes a new recursion–transform（RT） method with potential parameters to evaluate the nodal potential in arbitrary resistor networks. For the first time, we found ...In this paper, we made a new breakthrough, which proposes a new recursion–transform（RT） method with potential parameters to evaluate the nodal potential in arbitrary resistor networks. For the first time, we found the exact potential formulae of arbitrary m × n cobweb and fan networks by the RT method, and the potential formulae of infinite and semi-infinite networks are derived. As applications, a series of interesting corollaries of potential formulae are given by using the general formula, the equivalent resistance formula is deduced by using the potential formula, and we find a new trigonometric identity by comparing two equivalence results with different forms.展开更多
In this paper, we apply the recursive genetic programming (RGP) approach to the cognition of a system, and then proceed to the detecting procedure for structural changes in the system whose components are of long memo...In this paper, we apply the recursive genetic programming (RGP) approach to the cognition of a system, and then proceed to the detecting procedure for structural changes in the system whose components are of long memory. This approach is adaptive and model-free, which can simulate the individual activities of the system's participants, therefore, it has strong ability to recognize the operating mechanism of the system. Based on the previous cognition about the system, a testing statistic is developed for the detection of structural changes in the system. Furthermore, an example is presented to illustrate the validity and practical value of the proposed.展开更多
基金Supported in part by the National Thousand Talents Program of Chinathe National Natural Science Foundation of China(61473054)the Fundamental Research Funds for the Central Universities of China
文摘In this paper a recursive state-space model identification method is proposed for non-uniformly sampled systems in industrial applications. Two cases for measuring all states and only output(s) of such a system are considered for identification. In the case of state measurement, an identification algorithm based on the singular value decomposition(SVD) is developed to estimate the model parameter matrices by using the least-squares fitting. In the case of output measurement only, another identification algorithm is given by combining the SVD approach with a hierarchical identification strategy. An example is used to demonstrate the effectiveness of the proposed identification method.
基金co-National Science and Technology Major Project(No.2017-II-0009-0023)Innovation Guidance Support Project for Taicang Top Research Institutes(No.TC2019DYDS09)。
文摘Based on Recursive Radial Basis Function(RRBF)neural network,the Reduced Order Model(ROM)of compressor cascade was established to meet the urgent demand of highly efficient prediction of unsteady aerodynamics performance of turbomachinery.One novel ROM called ASA-RRBF model based on Adaptive Simulated Annealing(ASA)algorithm was developed to enhance the generalization ability of the unsteady ROM.The ROM was verified by predicting the unsteady aerodynamics performance of a highly-loaded compressor cascade.The results show that the RRBF model has higher accuracy in identification of the dimensionless total pressure and dimensionless static pressure of compressor cascade under nonlinear and unsteady conditions,and the model behaves higher stability and computational efficiency.However,for the strong nonlinear characteristics of aerodynamic parameters,the RRBF model presents lower accuracy.Additionally,the RRBF model predicts with a large error in the identification of aerodynamic parameters under linear and unsteady conditions.For ASA-RRBF,by introducing a small-amplitude and highfrequency sinusoidal signal as validation sample,the width of the basis function of the RRBF model is optimized to improve the generalization ability of the ROM under linear unsteady conditions.Besides,this model improves the predicting accuracy of dimensionless static pressure which has strong nonlinear characteristics.The ASA-RRBF model has higher prediction accuracy than RRBF model without significantly increasing the total time consumption.This novel model can predict the linear hysteresis of dimensionless static pressure happened in the harmonic condition,but it cannot accurately predict the beat frequency of dimensionless total pressure.
文摘The strap-down inertial navigation system (SINS) error of ballistic missile is generated by the mutual influence of gyroscope and accelerometer, and the recursive model is completely different from that of gimbaled INS. In the paper, a discrete error recursive model was obtained by studying the applied SINS error model of ballistic missile, and the discrete Kalman filtering simulation based on the model was carried out. The simulated results show that the model can depict the SINS error exactly and provide the advantages for research on integrated guidance and improved hit accuracy.
基金This work is supported by Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX18_0467)Jiangsu Province,China.During the revision of this paper,the author is supported by China Scholarship Council(No.201906840021)China to continue some research related to data processing.
文摘Kalman filter is commonly used in data filtering and parameters estimation of nonlinear system,such as projectile's trajectory estimation and control.While there is a drawback that the prior error covariance matrix and filter parameters are difficult to be determined,which may result in filtering divergence.As to the problem that the accuracy of state estimation for nonlinear ballistic model strongly depends on its mathematical model,we improve the weighted least squares method(WLSM)with minimum model error principle.Invariant embedding method is adopted to solve the cost function including the model error.With the knowledge of measurement data and measurement error covariance matrix,we use gradient descent algorithm to determine the weighting matrix of model error.The uncertainty and linearization error of model are recursively estimated by the proposed method,thus achieving an online filtering estimation of the observations.Simulation results indicate that the proposed recursive estimation algorithm is insensitive to initial conditions and of good robustness.
文摘A new recursive algorithm of multi variable time varying AR model is proposed. By changing the form of AR model, the parameter estimation can be regarded as state estimation of state equations. Then the Kalman filter is used to estimate the variation of
基金Project supported by Scientific Research Fund of Chongqing Municipal Education Commission (kj0604-16)
文摘In this article, the problem on the estimation of the convolution model parameters is considered. The recursive algorithm for estimating model parameters is introduced from the orthogonal procedure of the data, the convergence of this algorithm is theoretically discussed, and a sufficient condition for the convergence criterion of the orthogonal procedure is given. According to this condition, the recursive algorithm is convergent to model wavelet A- = （1, α1,..., αq）.
文摘Theoretical results related to properties of a regularized recursive algorithm for estimation of a high dimensional vector of parameters are presented and proved. The recursive character of the procedure is proposed to overcome the difficulties with high dimension of the observation vector in computation of a statistical regularized estimator. As to deal with high dimension of the vector of unknown parameters, the regularization is introduced by specifying a priori non-negative covariance structure for the vector of estimated parameters. Numerical example with Monte-Carlo simulation for a low-dimensional system as well as the state/parameter estimation in a very high dimensional oceanic model is presented to demonstrate the efficiency of the proposed approach.
基金Supported by the Chinese Academy of Sciences Program "Frontier Topics in Mathematical Physics" (KJCX3-SYW-S03)Supported Partially by the National Natural Science Foundation of China under Grant No.11035008
文摘The present work is much motivated by finding an explicit way in the construction of the Jack symmetric function,which is the spectrum generating function for the Calogero-Sutherland (CS) model.To accomplish this work,the hidden Virasoro structure in the CS model is much explored.In particular,we found that the Virasoro singular vectors form a skew hierarchy in the CS model.Literally,skew is analogous to coset,but here specifically refer to the operation on the Young tableaux.In fact,based on the construction of the Virasoro singular vectors,this hierarchical structure can be used to give a complete construction of the CS states,i.e.the Jack symmetric functions,recursively.The construction is given both in operator formalism as well as in integral representation.This new integral representation for the Jack symmetric functions may shed some insights on the spectrum constructions for the other integrable systems.
文摘Recursive formulations have significantly helped in achieving real-time computations and model-based control laws. The recursive dynamics simulator （ReDySim） is a MATLAB-based recur- sive solver for dynamic analysis of multibody systems. ReDySim delves upon the decoupled natural orthogonal complement approach originally developed for serial-chain manipulators. In comparison to the commercially available software, dynamic analyses in ReDySim can be performed without creating solid model. The input parameters are specified in MATLAB environment. ReDySim has capability to incorporate any control algorithm with utmost ease. In this work, the capabilities of ReDySim for solving open-loop and closed-loop systems are shown by examples of robotic gripper, KUKA KR5 industrial manipulator and four-bar mechanism. ReDySim can be downloaded for free from http：//www.redysim.co.nr and can be used almost instantly.
文摘A polynomial model, time origin shifting model(TOSM, is used to describe the trajectory of a moving target .Based on TOSM, a recursive laeast squares(RLS) algorithm with varied forgetting factor is derived for tracking of a non-maneuvering target. In order to apply this algorithm to maneuvering targets tracking ,a tracking signal is performed on-line to determine what kind of TOSm will be in effect to track a target with different dynamics. An effective multiple model least squares filtering and forecasting method dadpted to real tracking of a maneuvering target is formulated. The algorithm is computationally more effcient than Kalman filter and the percentage improvement from simulations show both of them are considerably alike to some extent.
基金The National Natural Science Foundation of China(No60472026)
文摘A two-dimensional （2-D） polynomial regression model is set up to approximate the time-frequency response of slowly time-varying orthogonal frequency-division multiplexing （OFDM） systems. With this model the estimation of the OFDM time-frequency response is turned into the optimization of some time-invariant model parameters. A new algorithm based on the expectation-maximization （EM） method is proposed to obtain the maximum-likelihood （ML） estimation of the polynomial model parameters over the 2-D observed data. At the same time, in order to reduce the complexity and avoid the computation instability, a novel recursive approach （RPEMTO） is given to calculate the values of the parameters. It is further shown that this 2-D polynomial EM-based algorithm for time-varying OFDM （PEMTO） can be simplified mathematically to handle the one-dimensional sequential estimation. Simulations illustrate that the proposed algorithms achieve a lower bit error rate （BER） than other blind algorithms.
基金The National Natural Science Foundation of China(No.50479017).
文摘Based on analyzing the limitations of the commonly used back-propagation neural network （BPNN）, a wavelet neural network （WNN） is adopted as the nonlinear river channel flood forecasting method replacing the BPNN. The WNN has the characteristics of fast convergence and improved capability of nonlinear approximation. For the purpose of adapting the timevarying characteristics of flood routing, the WNN is coupled with an AR real-time correction model. The AR model is utilized to calculate the forecast error. The coefficients of the AR real-time correction model are dynamically updated by an adaptive fading factor recursive least square（RLS） method. The application of the flood forecasting method in the cross section of Xijiang River at Gaoyao shows its effectiveness.
基金supported by National Natural Science Foundation of China(Grant No.51175511)
文摘Electro-hydraulic control systems are nonlinear in nature and their mathematic models have unknown parameters. Existing research of modeling and identification of the electro-hydraulic control system is mainly based on theoretical state space model, and the parameters identification is hard due to its demand on internal states measurement. Moreover, there are also some hard-to-model nonlinearities in theoretical model, which needs to be overcome. Modeling and identification of the electro-hydraulic control system of an excavator arm based on block-oriented nonlinear（BONL） models is investigated. The nonlinear state space model of the system is built first, and field tests are carried out to reveal the nonlinear characteristics of the system. Based on the physic insight into the system, three BONL models are adopted to describe the highly nonlinear system. The Hammerstein model is composed of a two-segment polynomial nonlinearity followed by a linear dynamic subsystem. The Hammerstein-Wiener（H-W） model is represented by the Hammerstein model in cascade with another single polynomial nonlinearity. A novel Pseudo-Hammerstein-Wiener（P-H-W） model is developed by replacing the single polynomial of the H-W model by a non-smooth backlash function. The key term separation principle is applied to simplify the BONL models into linear-in-parameters struc^tres. Then, a modified recursive least square algorithm（MRLSA） with iterative estimation of internal variables is developed to identify the all the parameters simultaneously. The identification results demonstrate that the BONL models with two-segment polynomial nonlinearities are able to capture the system behavior, and the P-H-W model has the best prediction accuracy. Comparison experiments show that the velocity prediction error of the P-H-W model is reduced by 14%, 30% and 75% to the H-W model, Hammerstein model, and extended auto-regressive （ARX） model, respectively. This research is helpful in controller design, system monitoring and diagnosis.
基金Project supported by the National Natural Science Foundation of China (No.60574047)the National High-Tech R & D Program (863)of China (No.2007AA04Z168)the Research Fund for the Doctoral Program of Higher Education of China (No.20050335018)
文摘A multi-loop adaptive internal model control (IMC) strategy based on a dynamic partial least squares (PLS) frame-work is proposed to account for plant model errors caused by slow aging,drift in operational conditions,or environmental changes.Since PLS decomposition structure enables multi-loop controller design within latent spaces,a multivariable adaptive control scheme can be converted easily into several independent univariable control loops in the PLS space.In each latent subspace,once the model error exceeds a specific threshold,online adaptation rules are implemented separately to correct the plant model mismatch via a recursive least squares (RLS) algorithm.Because the IMC extracts the inverse of the minimum part of the internal model as its structure,the IMC controller is self-tuned by explicitly updating the parameters,which are parts of the internal model.Both parameter convergence and system stability are briefly analyzed,and proved to be effective.Finally,the proposed control scheme is tested and evaluated using a widely-used benchmark of a multi-input multi-output (MIMO) system with pure delay.
基金Project(2007AA04Z162) supported by the National High-Tech Research and Development Program of ChinaProjects(2006T089, 2009T062) supported by the University Innovation Team in the Educational Department of Liaoning Province, China
文摘In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive functional control(AFPFC) scheme for multivariable nonlinear systems was proposed.Firstly,multivariable nonlinear systems were described based on Takagi-Sugeno(T-S) fuzzy models;assuming that the antecedent parameters of T-S models were kept,the consequent parameters were identified on-line by using the weighted recursive least square(WRLS) method.Secondly,the identified T-S models were linearized to be time-varying state space model at each sampling instant.Finally,by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established.The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015;the tracking ability of the proposed AFPFC is superior to that of non-AFPFC(NAFPFC) for pH process without disturbances,the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC;when the process parameters of AFPFC vary with time the integrated absolute error(IAE) performance index still retains to be less than 200 compared with that of NAFPFC.
基金Supported by the National High Technology Research and Development Program of China(2014AA041802)the National Natural Science Foundation of China(61573269)
文摘The output feedback model predictive control(MPC),for a linear parameter varying(LPV) process system including unmeasurable model parameters and disturbance(all lying in known polytopes),is considered.Some previously developed tools,including the norm-bounding technique for relaxing the disturbance-related constraint handling,the dynamic output feedback law,the notion of quadratic boundedness for specifying the closed-loop stability,and the ellipsoidal state estimation error bound for guaranteeing the recursive feasibility,are merged in the control design.Some previous approaches are shown to be the special cases.An example of continuous stirred tank reactor(CSTR) is given to show the effectiveness of the proposed approaches.
基金Supported by the National Natural Science Foundation of China (No.60575006).
文摘This paper presents a novel approach to structure determination of linear systems along with the choice of system orders and parameters. AutoRegressive （AR）, Moving Average （MA） or AutoRegressive-Moving Average （ARMA） model structure can be extracted blindly from the Third Order Cumulants （TOC） of the system output ts, where the unknown system is driven by an unobservable stationary independent identically distributed （i.i.d.） non-Gaussian signal. By means of the system order recursion, whether the system has an AR structure or has AR part of an ARMA structure is firstly investigated. MA features in the TOC domain is then applied as a threshold to decide if the system is an MA model or has MA part of an ARMA model. Numerical simulations illustrate the generality of the proposed blind structure identification methodology that may serve as a guideline for blind, linear system modeling.
基金Project supported by the Natural Science Foundation of Jiangsu Province,China(Grant No.BK20161278)
文摘In this paper, we made a new breakthrough, which proposes a new recursion–transform（RT） method with potential parameters to evaluate the nodal potential in arbitrary resistor networks. For the first time, we found the exact potential formulae of arbitrary m × n cobweb and fan networks by the RT method, and the potential formulae of infinite and semi-infinite networks are derived. As applications, a series of interesting corollaries of potential formulae are given by using the general formula, the equivalent resistance formula is deduced by using the potential formula, and we find a new trigonometric identity by comparing two equivalence results with different forms.
文摘In this paper, we apply the recursive genetic programming (RGP) approach to the cognition of a system, and then proceed to the detecting procedure for structural changes in the system whose components are of long memory. This approach is adaptive and model-free, which can simulate the individual activities of the system's participants, therefore, it has strong ability to recognize the operating mechanism of the system. Based on the previous cognition about the system, a testing statistic is developed for the detection of structural changes in the system. Furthermore, an example is presented to illustrate the validity and practical value of the proposed.
