TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to es...TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.展开更多
Due to the low concentration of indoor air contaminants, photocatalytic technology shows low efficiency for indoor air purification. The application of TiO2 for photocatalytic removal of formaldehyde is limited, becau...Due to the low concentration of indoor air contaminants, photocatalytic technology shows low efficiency for indoor air purification. The application of TiO2 for photocatalytic removal of formaldehyde is limited, because TiO2 can only absorb ultraviolet （UV） light. Immobilization of TiO2 nanoparticles on the surface of graphene can improve the visible light photocatalytic activity and the adsorption capacity. In this study, rGO （reduced graphene oxide）/TiO2 was synthesized through a hydrotherrnal method using titanium tetrabutoxide and graphene oxide as precursors, and was used for the degradation of low concentration formaldehyde in indoor air under visible light illumination. Characterization of the crystalline structure and morphology of rGO/TiO2 revealed that most GO was reduced to rGO during the hydrothermal treatment, and anatase TiO2 nanoparticles （with particle size of 15-30 nm） were dispersed well on the surface of the rGO sheets, rGO/TiO2 exhibited excellent photocatalyfic activity for degradation of formaldehyde in indoor air and this can be attributed to the role ofrGO, which can act as the electron sink and transporter for separating photo-generated electron-hole pairs through interfacial charge transfer. Furthermore, rGO could adsorb formaldehyde molecules from air to produce a high concentration of formaldehyde on the surface of rGO/ TiO2. Under visible light irradiation for 240 min, the concentration of formaldehyde could be reduced to 58.5 ppbV. rGO/TiO2 showed excellent moisture-resistance behavior, and after five cycles, rGO/TiO2 maintained high photocatalytic activity for the removal of formaldehyde （84.6%）. This work suggests that the synthesized rGO/TiO2 is a promising photocatalyst for indoor formaldehyde removal.展开更多
Polyaniline （PAn） sensitized nanocrystalline TiO2 composites （TiO2/PAn） were successfully prepared and used as an efficient photocatalyst for the degradation of dye methylene blue （MB）. The results showed that P...Polyaniline （PAn） sensitized nanocrystalline TiO2 composites （TiO2/PAn） were successfully prepared and used as an efficient photocatalyst for the degradation of dye methylene blue （MB）. The results showed that PAn was able to sensitize TiO2 efficiently and the composite photocatalyst could be activated by absorbing both the ultraviolet and visible light （λ： 190 ～ 800 nm）, whereas pure TiO2 absorbed ultraviolet light only （λ 〈 380 nm）. Under the irradiation of natural light, MB could be degraded more efficiently on the TiO2/PAn composites than on the TiO2 Furthermore, it could be easily separated from the solution by simple sedimentation.展开更多
We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged stat...We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged state of graphene and/or by introducing an external electric field arising from tourmaline.A simple two‐step hydrothermal method was used to synthesize G/T/TiO2composites and poly(diallyldimethylammonium chloride)‐G/T/TiO2composites.In the photocatalytic degradation of2‐propanol(IPA),the catalytic activity of the composite containing negatively charged graphene was higher than of the composite containing positively charged graphene.The highest acetone evolution rate(223?mol/h)was achieved using the ternary composite with the optimum composition,i.e.,G0.5/T5/TiO2(0.5wt%graphene and5wt%tourmaline).The involvement of tourmaline and graphene in the composite is believed to facilitate the separation and transportation of electrons and holes photogenerated in TiO2.This synergetic effect could account for the enhanced photocatalytic activity of the G/T/TiO2composite.A mechanistic study indicated that O2??radicals and holes were the main reactive oxygen species in photocatalytic degradation of IPA.展开更多
The popularity of lithium–sulfur batteries has been increasing gradually due to their ultrahigh theoretical specific capacity and energy density. Nevertheless, they also have lots of drawbacks to be overcome, such as...The popularity of lithium–sulfur batteries has been increasing gradually due to their ultrahigh theoretical specific capacity and energy density. Nevertheless, they also have lots of drawbacks to be overcome, such as poor conductivity, severe volume expansion, and serious“shuttle effect”. In this work, reduced graphene oxide/molybdenum dioxide(rGO/MoO_(2)) composite is synthesized and applied to modify polypropylene separator. The modified polypropylene separator introduces synergistic tri-functions of physical adsorption, chemical interaction and catalytic effects, which can inhibit the“shuttle effect” and enhance the electrochemical performances of lithium-sulfur batteries. In the prepared r GO/MoO_(2) composite, the polar MoO_(2) chemically adsorbs the intermediate lithium polysulfide, while the rGO with good electrical conductivity not only acts as a physical barrier to prevent diffusion of polysulfide ions, but also improves the conversion efficiency of active material intercepted on the separator. As a consequence, the battery assembled with rGO/MoO_(2) modified polypropylene separator exhibits a reversible capacity of 757.5 mAh·g^(-1) after 200 cycles at0.2 C with a negligible capacity decay of 0.207% per cycle,which indicates a good long-period cycling stability. Furthermore, the rate performance and self-discharge suppression are also improved by introducing modified polypropylene separator. It shows that rGO/MoO_(2) composite is a promising material for separator modification in lithium-sulfur batteries.展开更多
Modern communication technologies put forward higher requirements for electromagnetic wave(EMW)absorption materials.Metal-organic framework(MOF)derivatives have been widely concerned with its diverse advantages.To bre...Modern communication technologies put forward higher requirements for electromagnetic wave(EMW)absorption materials.Metal-organic framework(MOF)derivatives have been widely concerned with its diverse advantages.To break the mindset of magneticderivative design,and make up the shortage of monometallic non-magnetic derivatives,we first try non-magnetic bimetallic MOFs derivatives to achieve efficient EMW absorption.The porous carbon-wrapped TiO2/ZrTiO4 composites derived from PCN-415(TiZr-MOFs)are qualified with a minimum reflection loss of−67.8 dB(2.16 mm,13.0 GHz),and a maximum effective absorption bandwidth of 5.9 GHz(2.70 mm).Through in-depth discussions,the synergy of enhanced interfacial polarization and other attenuation mechanisms in the composites is revealed.Therefore,this work confirms the huge potentials of nonmagnetic bimetallic MOFs derivatives in EMW absorption applications.展开更多
A nanoheterojunction composite photocatalyst Bi2O3/TiO2 working under visible-light （λ≥ 420 nm） was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2 molar ratio. Maleic acid was emplo...A nanoheterojunction composite photocatalyst Bi2O3/TiO2 working under visible-light （λ≥ 420 nm） was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2 molar ratio. Maleic acid was employed as an organic binder to unite Bi2O3 and TiO2 nanoparticles. The SEM, TEM, XRD and diffuse reflectance spectra were utilized to characterize the prepared Bi2O3/TiO2 nanoheterojunction. The nanocomposite exhibited unusual high photocatalytic activity in decomposing 2-propanol in gas phase and phenol in aqueous phase and, evolution of CO2 under visible light irradiation while the end members exhibited low photocatalytic activity. The composite was optimized to 5 mol% Bi2O3/TiO2. The remarkable high photocatalytic efficiency originates from the unique relative energy band position of Bi2O3 and TiO2 as well as the absorption of visible light by Bi2O3.展开更多
TiO2 filled polytetrafluoroethylene (PTFE) composite were fabricated for microwave circuit applications. PTFE/TiO2 composites were prepared by cold pressing and hot treating. The particle size of TiO2 varied from 5 μ...TiO2 filled polytetrafluoroethylene (PTFE) composite were fabricated for microwave circuit applications. PTFE/TiO2 composites were prepared by cold pressing and hot treating. The particle size of TiO2 varied from 5 μm to 11 μm.TiO2 powders with different sizes were prepared by the solid state ceramic route. The effects of TiO2 particle size on the microstructure, density, moisture absorption, thermal conductivity and microwave dielectric properties of PTFE/TiO2 composites were investigated. The density showed an increasing trend as the TiO2 particle size increased, while the dielectric loss (tanδ) and moisture absorption decreased with the increase of TiO2 particle size. The dielectric constant (εr) and thermal conductivity (λ) decreased up to D50 = 6.5 μm and then sharply increased. Good properties with values of εr = 6.8, tanδ = 0.0012 and λ = 0.533 W?m?1?K?1 were obtained in PTFE/TiO2 composites when the particle size of TiO2 was 11 μm.展开更多
In the present work, composites of poly (methyl methacrylate)/titanium oxide nanoparticles (100/0, 97.5/2.5, 95/5, 92.5/7.5, 90/10 and 0/100 wt/wt%)were prepared to be used as bioequivalent materials according to thei...In the present work, composites of poly (methyl methacrylate)/titanium oxide nanoparticles (100/0, 97.5/2.5, 95/5, 92.5/7.5, 90/10 and 0/100 wt/wt%)were prepared to be used as bioequivalent materials according to their importance broad practical and medical applications. Thermal properties as well as X-ray diffraction analyses were employed to characterize the structure properties of such composite. The obtained results showed variations in the glass transition temperature (Tg), the melting temperature (Tm), shape and area of thermal peaks which were attributed to the different degrees of crystallinity and the existence of interactions between PMMA and TiO2 nanoparticle molecules. The XRD patterns showed sharpening of peaks at different concentrations of nano-TiO2 powder with PMMA. This indicated changes in the crystallinity/amorphosity ratio, and also suggested that the miscibility between the amorphous components of homo- polymers PMMA and nano-TiO2 powder is possible.The results showed that nano-TiO2 powder mix with PMMA can improve the thermal stability of the homo-polymer under investigation, lead- ing to interesting technological applications.展开更多
We report a facile method for the fabrication of TiO2 nanofiber-nanoparticle composite （FP） via. simulta- neous electrospraying and electrospinning for dye-sensitized solar cell （DSC） applications. The loading of ...We report a facile method for the fabrication of TiO2 nanofiber-nanoparticle composite （FP） via. simulta- neous electrospraying and electrospinning for dye-sensitized solar cell （DSC） applications. The loading of nanoparticles on the fibers is controlled by varying their feed rates during electrospinning. The FP composites having three different particle loading are prepared by the methodology and the FP with the highest particle loading （denoted as FP-3 in the manuscript） showed the best overall efficiency of 9.15% in comparison to the other compositions of the FP （FP-2, 8.15% and FP-1, Z51%, respectively） and nanofibers （F） and nanoparticles （P） separately （7.21 and 7.81, respectively）. All the material systems are characterized by spec- troscopy, microscopy, surface area measurements and the devices are characterized by current-voltage （I-V）, incident photon-to-current conversion efficiency （IPCE）, electrochemical impedance measurements, etc. I-V, dye-loading and reflectance measurements throw light on the overall performance of the DSC devices.展开更多
Compared with ordinary graphite anode,SnO_(2) possesses higher theoretical specifc capacity,rich raw materials and low price.While the severe volume expansion of SnO_(2) during lithium-ion extraction/intercalation lim...Compared with ordinary graphite anode,SnO_(2) possesses higher theoretical specifc capacity,rich raw materials and low price.While the severe volume expansion of SnO_(2) during lithium-ion extraction/intercalation limits its further application.To solve this problem,in this work the reduced graphene oxide(rGO)was introduced as volume bufer matrix of SnO_(2).Herein,SnO_(2)/rGO composite is obtained through one-step hydrothermal method.Three-dimensional structure of rGO could efectively hinder the polymerization of SnO_(2) nanoparticles and provide more lithium storage sites attributed to high specifc surface area and density defects.The initial discharge capacity of the composite cathode is 959 mA·h·g^(-1) and the capacity remained at 300 mA·h·g^(-1) after 1000 cycles at 1 C.It proved that the rGO added in the anode has a capacity contribution to the lithium-ion battery.It changes the capacity contribution mechanism from difusion process dominance to surface driven capacitive contribution.Due to the addition of rGO,the anode material gains stable structure and great conductivity.展开更多
Silica( SiO_2) based aerogel/xerogel materials have been received ever-growing attentions for versatile applications. However,the widespread applications are narrowed by the inert properties,fragile and brittle nature...Silica( SiO_2) based aerogel/xerogel materials have been received ever-growing attentions for versatile applications. However,the widespread applications are narrowed by the inert properties,fragile and brittle natureof silica materials and cumbersome preparation processes. In this paper,titania( TiO_2) was introduced into SiO_2 matrix to form photocatalytic hybrid gels. The TiO_2/SiO_2 composites were then reinforced by the impregnation of various fibrillary reinforcements,such as glass,mullite mineral and ceramic fibers. The properties of the composites were studied systematically in terms of fiberstability,microstructure,chemical interaction and thermal conductivity. The final xerogel composites displayed improved monolithic geometry,satisfied thermal conductivity(0. 09-0. 25 W·m^(-1)·K^(-1)) and optimized photocatalytic performance(85% removal of model pollutant of methyl orange( Mo)),which could be expected to be a feasible route to multi-functional building facades in the future.展开更多
In this paper, a detailed study was carried out on the PTFE reinforced with TiO2 and CaTiO3. The filler content of ceramic powder was a fixed value of 61 wt% and the content of CaTiO3 in PTFE matrix varied from 0 wt% ...In this paper, a detailed study was carried out on the PTFE reinforced with TiO2 and CaTiO3. The filler content of ceramic powder was a fixed value of 61 wt% and the content of CaTiO3 in PTFE matrix varied from 0 wt% to 16 wt% with a step size of 4 wt%. The effects of CaTiO3 loading on the density, moisture absorption, thermal expansion, microstructure and microwave dielectric properties were investigated. As CaTiO3 loading content increased from 0 wt% to 16 wt%, the thermal expansion initially displayed a sharp increase, and showed a slight enhancement when the content of CaTiO3 exceeded 12 wt%. The density experienced a continuous decrease with the addition of CaTiO3. The moisture absorption displayed a steady increase with the increasing CaTiO3 loading amount. The changing of dielectric constant (εr) and loss tangent (tanδ) were similar to that of the moisture absorption in a manner. Good dielectric properties with values of εr = 11.60, tanδ = 0.002 were obtained in the PTFE matrix with 16 wt% CaTiO3 and 45 wt% TiO2.展开更多
Particulate composites based on isotactic polypropylene(iPP) and titanium dioxide(TiO 2) have been prepared and their morphology and thermal behavior investigated by scanning electron microscopy(SEM), differential sca...Particulate composites based on isotactic polypropylene(iPP) and titanium dioxide(TiO 2) have been prepared and their morphology and thermal behavior investigated by scanning electron microscopy(SEM), differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA). Tensile tests were performed to assess the influence of TiO 2 on the mechanical properties of the iPP.展开更多
ZrO2/TiO2 composite photocatalytic film was produced on the pure titanium substrate using in-situ Zr（OH）4 colloidal particle by the micro-arc oxidation technique and characterized by scanning electron microscope （...ZrO2/TiO2 composite photocatalytic film was produced on the pure titanium substrate using in-situ Zr（OH）4 colloidal particle by the micro-arc oxidation technique and characterized by scanning electron microscope （SEM）, energy dispersive X-ray （EDX）, X-ray diffraction （XRD） and ultraviolet-visible （UV-Vis） spectrophotometer. The composite film shows a lamellar and porous structure which consists of anatase, futile and ZrO2 phases. The optical absorption edge of film is shifted to longer wavelength when ZrO2 is introduced to TiO2. Furthermore, the photocatalytic reaction rate constants of degradation of rhodamine B solution with ZrO2/TiO2 composite film and pure TiO2 film under ultraviolet irradiation are measured as 0.0442 and 0.0186 h 1, respectively.展开更多
Solid state NMR was successfully used to determine the proton spin-lattice relaxation time in the rotating frame (T1ρH) for systems based on polypropylene (PP) and PP with titanium dioxide (TiO<sub>2</sub>...Solid state NMR was successfully used to determine the proton spin-lattice relaxation time in the rotating frame (T1ρH) for systems based on polypropylene (PP) and PP with titanium dioxide (TiO<sub>2</sub>) organically modified or unmodified incorporated, in order to understand the molecular behavior of these systems. These techniques were employed in the samples organically modified and unmodified TiO<sub>2</sub> to investigate the effect of organic modification on the dispersion and distribution of the particles in the PP matrix. The results were analyzed in terms of the effect of the particles organic modified or not according to the intermolecular interaction in the composites. According to the T1ρH values, all composites showed at least two domains: the short values were related to the rigid part, which included the crystalline and amorphous phase constricted in it, while the longer times were attributed to the amorphous region, which had higher molecular mobility compared to the rigid region of the materials. The increase in the relaxation time parameter in the composites compared to the pure PP was associated to the strong interaction between titanium dioxide particles and the polymer chains. This effect was more pronounced for the systems containing organically modified TiO<sub>2</sub>. According to the results, it could be inferred that intermolecular interaction occurred in the CH<sub>2</sub> and CH groups, being more intense with CH<sub>2</sub> groups. Finally, the solid state NMR techniques were able to evaluate the molecular dynamics of those systems.展开更多
基金Project(50802034) supported by the National Natural Science Foundation of ChinaProject(11A093) supported by the Key Project Foundation by the Education Department of Hunan Province,China
文摘TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.
基金financially supported by China Postdoctoral Science Foundation(No.2016M592496)Natural Science Foundation of Guangdong Province,China(Nos.2017A030310279,2014A030310431)+1 种基金National Natural Science Foundation of China(Nos.41501319,91645119,21207039,U1201231,51378218,51108187 and 50978103)Guangzhou science and technology plan(No.201607010095)
文摘Due to the low concentration of indoor air contaminants, photocatalytic technology shows low efficiency for indoor air purification. The application of TiO2 for photocatalytic removal of formaldehyde is limited, because TiO2 can only absorb ultraviolet （UV） light. Immobilization of TiO2 nanoparticles on the surface of graphene can improve the visible light photocatalytic activity and the adsorption capacity. In this study, rGO （reduced graphene oxide）/TiO2 was synthesized through a hydrotherrnal method using titanium tetrabutoxide and graphene oxide as precursors, and was used for the degradation of low concentration formaldehyde in indoor air under visible light illumination. Characterization of the crystalline structure and morphology of rGO/TiO2 revealed that most GO was reduced to rGO during the hydrothermal treatment, and anatase TiO2 nanoparticles （with particle size of 15-30 nm） were dispersed well on the surface of the rGO sheets, rGO/TiO2 exhibited excellent photocatalyfic activity for degradation of formaldehyde in indoor air and this can be attributed to the role ofrGO, which can act as the electron sink and transporter for separating photo-generated electron-hole pairs through interfacial charge transfer. Furthermore, rGO could adsorb formaldehyde molecules from air to produce a high concentration of formaldehyde on the surface of rGO/ TiO2. Under visible light irradiation for 240 min, the concentration of formaldehyde could be reduced to 58.5 ppbV. rGO/TiO2 showed excellent moisture-resistance behavior, and after five cycles, rGO/TiO2 maintained high photocatalytic activity for the removal of formaldehyde （84.6%）. This work suggests that the synthesized rGO/TiO2 is a promising photocatalyst for indoor formaldehyde removal.
文摘Polyaniline （PAn） sensitized nanocrystalline TiO2 composites （TiO2/PAn） were successfully prepared and used as an efficient photocatalyst for the degradation of dye methylene blue （MB）. The results showed that PAn was able to sensitize TiO2 efficiently and the composite photocatalyst could be activated by absorbing both the ultraviolet and visible light （λ： 190 ～ 800 nm）, whereas pure TiO2 absorbed ultraviolet light only （λ 〈 380 nm）. Under the irradiation of natural light, MB could be degraded more efficiently on the TiO2/PAn composites than on the TiO2 Furthermore, it could be easily separated from the solution by simple sedimentation.
基金supported by the National Basic Research Program of China (973 Program,2014CB239300)the National Natural Science Foundation of China (51572191)the Natural Science Foundation of Tianjin (13JCYBJC16600)~~
文摘We report the construction of a graphene/tourmaline/TiO2(G/T/TiO2)composite system with enhanced charge‐carrier separation,and therefore enhanced photocatalytic properties,based on tailoring the surface‐charged state of graphene and/or by introducing an external electric field arising from tourmaline.A simple two‐step hydrothermal method was used to synthesize G/T/TiO2composites and poly(diallyldimethylammonium chloride)‐G/T/TiO2composites.In the photocatalytic degradation of2‐propanol(IPA),the catalytic activity of the composite containing negatively charged graphene was higher than of the composite containing positively charged graphene.The highest acetone evolution rate(223?mol/h)was achieved using the ternary composite with the optimum composition,i.e.,G0.5/T5/TiO2(0.5wt%graphene and5wt%tourmaline).The involvement of tourmaline and graphene in the composite is believed to facilitate the separation and transportation of electrons and holes photogenerated in TiO2.This synergetic effect could account for the enhanced photocatalytic activity of the G/T/TiO2composite.A mechanistic study indicated that O2??radicals and holes were the main reactive oxygen species in photocatalytic degradation of IPA.
基金financially supported by the National Natural Science Foundation of China (Nos.21606065 and 21676067)Anhui Provincial Natural Science Foundation (Nos.1708085QE98 and 1908085QE178)+1 种基金the Fundamental Research Funds for the Central Universities (Nos.JZ2017YYPY0253,JZ2017HGTB0198,JZ2018HGBZ0138 and PA2020GDGP0054)the Opening Project of CAS Key Laboratory of Materials for Energy Conversion (No.KF2018003)。
文摘The popularity of lithium–sulfur batteries has been increasing gradually due to their ultrahigh theoretical specific capacity and energy density. Nevertheless, they also have lots of drawbacks to be overcome, such as poor conductivity, severe volume expansion, and serious“shuttle effect”. In this work, reduced graphene oxide/molybdenum dioxide(rGO/MoO_(2)) composite is synthesized and applied to modify polypropylene separator. The modified polypropylene separator introduces synergistic tri-functions of physical adsorption, chemical interaction and catalytic effects, which can inhibit the“shuttle effect” and enhance the electrochemical performances of lithium-sulfur batteries. In the prepared r GO/MoO_(2) composite, the polar MoO_(2) chemically adsorbs the intermediate lithium polysulfide, while the rGO with good electrical conductivity not only acts as a physical barrier to prevent diffusion of polysulfide ions, but also improves the conversion efficiency of active material intercepted on the separator. As a consequence, the battery assembled with rGO/MoO_(2) modified polypropylene separator exhibits a reversible capacity of 757.5 mAh·g^(-1) after 200 cycles at0.2 C with a negligible capacity decay of 0.207% per cycle,which indicates a good long-period cycling stability. Furthermore, the rate performance and self-discharge suppression are also improved by introducing modified polypropylene separator. It shows that rGO/MoO_(2) composite is a promising material for separator modification in lithium-sulfur batteries.
基金The authors acknowledge funding from the National Natural Science Foundation of China(Nos.51572157,21902085,and 51702188)Natural Science Foundation of Shandong Province(No.ZR2019QF012)+1 种基金Fundamental Research Funds for the Central Universities(No.2018JC036 and No.2018JC046)Young Scholars Program of Shandong University(No.2018WLJH25).
文摘Modern communication technologies put forward higher requirements for electromagnetic wave(EMW)absorption materials.Metal-organic framework(MOF)derivatives have been widely concerned with its diverse advantages.To break the mindset of magneticderivative design,and make up the shortage of monometallic non-magnetic derivatives,we first try non-magnetic bimetallic MOFs derivatives to achieve efficient EMW absorption.The porous carbon-wrapped TiO2/ZrTiO4 composites derived from PCN-415(TiZr-MOFs)are qualified with a minimum reflection loss of−67.8 dB(2.16 mm,13.0 GHz),and a maximum effective absorption bandwidth of 5.9 GHz(2.70 mm).Through in-depth discussions,the synergy of enhanced interfacial polarization and other attenuation mechanisms in the composites is revealed.Therefore,this work confirms the huge potentials of nonmagnetic bimetallic MOFs derivatives in EMW absorption applications.
文摘A nanoheterojunction composite photocatalyst Bi2O3/TiO2 working under visible-light （λ≥ 420 nm） was prepared by combining two semiconductors Bi2O3 and TiO2 varying the Bi2O3/TiO2 molar ratio. Maleic acid was employed as an organic binder to unite Bi2O3 and TiO2 nanoparticles. The SEM, TEM, XRD and diffuse reflectance spectra were utilized to characterize the prepared Bi2O3/TiO2 nanoheterojunction. The nanocomposite exhibited unusual high photocatalytic activity in decomposing 2-propanol in gas phase and phenol in aqueous phase and, evolution of CO2 under visible light irradiation while the end members exhibited low photocatalytic activity. The composite was optimized to 5 mol% Bi2O3/TiO2. The remarkable high photocatalytic efficiency originates from the unique relative energy band position of Bi2O3 and TiO2 as well as the absorption of visible light by Bi2O3.
文摘TiO2 filled polytetrafluoroethylene (PTFE) composite were fabricated for microwave circuit applications. PTFE/TiO2 composites were prepared by cold pressing and hot treating. The particle size of TiO2 varied from 5 μm to 11 μm.TiO2 powders with different sizes were prepared by the solid state ceramic route. The effects of TiO2 particle size on the microstructure, density, moisture absorption, thermal conductivity and microwave dielectric properties of PTFE/TiO2 composites were investigated. The density showed an increasing trend as the TiO2 particle size increased, while the dielectric loss (tanδ) and moisture absorption decreased with the increase of TiO2 particle size. The dielectric constant (εr) and thermal conductivity (λ) decreased up to D50 = 6.5 μm and then sharply increased. Good properties with values of εr = 6.8, tanδ = 0.0012 and λ = 0.533 W?m?1?K?1 were obtained in PTFE/TiO2 composites when the particle size of TiO2 was 11 μm.
文摘In the present work, composites of poly (methyl methacrylate)/titanium oxide nanoparticles (100/0, 97.5/2.5, 95/5, 92.5/7.5, 90/10 and 0/100 wt/wt%)were prepared to be used as bioequivalent materials according to their importance broad practical and medical applications. Thermal properties as well as X-ray diffraction analyses were employed to characterize the structure properties of such composite. The obtained results showed variations in the glass transition temperature (Tg), the melting temperature (Tm), shape and area of thermal peaks which were attributed to the different degrees of crystallinity and the existence of interactions between PMMA and TiO2 nanoparticle molecules. The XRD patterns showed sharpening of peaks at different concentrations of nano-TiO2 powder with PMMA. This indicated changes in the crystallinity/amorphosity ratio, and also suggested that the miscibility between the amorphous components of homo- polymers PMMA and nano-TiO2 powder is possible.The results showed that nano-TiO2 powder mix with PMMA can improve the thermal stability of the homo-polymer under investigation, lead- ing to interesting technological applications.
基金supported by Ministry of New and Renewable Energy(MNRE)the Solar Energy Research Initiative(SERI),respectively.of Govt.of India
文摘We report a facile method for the fabrication of TiO2 nanofiber-nanoparticle composite （FP） via. simulta- neous electrospraying and electrospinning for dye-sensitized solar cell （DSC） applications. The loading of nanoparticles on the fibers is controlled by varying their feed rates during electrospinning. The FP composites having three different particle loading are prepared by the methodology and the FP with the highest particle loading （denoted as FP-3 in the manuscript） showed the best overall efficiency of 9.15% in comparison to the other compositions of the FP （FP-2, 8.15% and FP-1, Z51%, respectively） and nanofibers （F） and nanoparticles （P） separately （7.21 and 7.81, respectively）. All the material systems are characterized by spec- troscopy, microscopy, surface area measurements and the devices are characterized by current-voltage （I-V）, incident photon-to-current conversion efficiency （IPCE）, electrochemical impedance measurements, etc. I-V, dye-loading and reflectance measurements throw light on the overall performance of the DSC devices.
基金Supported by National Natural Science Foundation of China(Grant No.61774022)Natural Science Foundation of Guangdong Province(Grant No.2022A1515011449)+2 种基金Special Program for Science Research Foundation of the Higher Education Institutions of Guangdong Providence(Grant No.2020ZDZX2052)2020 Li Ka Shing Foundation Cross-Disciplinary Research Grant(Grant No.2020LKSFG01A)Research.Start-up Foundation of Shantou University(Grant No.NTF20024).
文摘Compared with ordinary graphite anode,SnO_(2) possesses higher theoretical specifc capacity,rich raw materials and low price.While the severe volume expansion of SnO_(2) during lithium-ion extraction/intercalation limits its further application.To solve this problem,in this work the reduced graphene oxide(rGO)was introduced as volume bufer matrix of SnO_(2).Herein,SnO_(2)/rGO composite is obtained through one-step hydrothermal method.Three-dimensional structure of rGO could efectively hinder the polymerization of SnO_(2) nanoparticles and provide more lithium storage sites attributed to high specifc surface area and density defects.The initial discharge capacity of the composite cathode is 959 mA·h·g^(-1) and the capacity remained at 300 mA·h·g^(-1) after 1000 cycles at 1 C.It proved that the rGO added in the anode has a capacity contribution to the lithium-ion battery.It changes the capacity contribution mechanism from difusion process dominance to surface driven capacitive contribution.Due to the addition of rGO,the anode material gains stable structure and great conductivity.
基金National Natural Science Foundations of China(Nos.51308079,51408073,51678080,51678081)
文摘Silica( SiO_2) based aerogel/xerogel materials have been received ever-growing attentions for versatile applications. However,the widespread applications are narrowed by the inert properties,fragile and brittle natureof silica materials and cumbersome preparation processes. In this paper,titania( TiO_2) was introduced into SiO_2 matrix to form photocatalytic hybrid gels. The TiO_2/SiO_2 composites were then reinforced by the impregnation of various fibrillary reinforcements,such as glass,mullite mineral and ceramic fibers. The properties of the composites were studied systematically in terms of fiberstability,microstructure,chemical interaction and thermal conductivity. The final xerogel composites displayed improved monolithic geometry,satisfied thermal conductivity(0. 09-0. 25 W·m^(-1)·K^(-1)) and optimized photocatalytic performance(85% removal of model pollutant of methyl orange( Mo)),which could be expected to be a feasible route to multi-functional building facades in the future.
文摘In this paper, a detailed study was carried out on the PTFE reinforced with TiO2 and CaTiO3. The filler content of ceramic powder was a fixed value of 61 wt% and the content of CaTiO3 in PTFE matrix varied from 0 wt% to 16 wt% with a step size of 4 wt%. The effects of CaTiO3 loading on the density, moisture absorption, thermal expansion, microstructure and microwave dielectric properties were investigated. As CaTiO3 loading content increased from 0 wt% to 16 wt%, the thermal expansion initially displayed a sharp increase, and showed a slight enhancement when the content of CaTiO3 exceeded 12 wt%. The density experienced a continuous decrease with the addition of CaTiO3. The moisture absorption displayed a steady increase with the increasing CaTiO3 loading amount. The changing of dielectric constant (εr) and loss tangent (tanδ) were similar to that of the moisture absorption in a manner. Good dielectric properties with values of εr = 11.60, tanδ = 0.002 were obtained in the PTFE matrix with 16 wt% CaTiO3 and 45 wt% TiO2.
文摘Particulate composites based on isotactic polypropylene(iPP) and titanium dioxide(TiO 2) have been prepared and their morphology and thermal behavior investigated by scanning electron microscopy(SEM), differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA). Tensile tests were performed to assess the influence of TiO 2 on the mechanical properties of the iPP.
基金Project(gf200901002)supported by the Open Research Fund of National Defense Key Disciplines Laboratory of Light Alloy Processing Science and Technology of Nanchang Hangkong University,China
文摘ZrO2/TiO2 composite photocatalytic film was produced on the pure titanium substrate using in-situ Zr（OH）4 colloidal particle by the micro-arc oxidation technique and characterized by scanning electron microscope （SEM）, energy dispersive X-ray （EDX）, X-ray diffraction （XRD） and ultraviolet-visible （UV-Vis） spectrophotometer. The composite film shows a lamellar and porous structure which consists of anatase, futile and ZrO2 phases. The optical absorption edge of film is shifted to longer wavelength when ZrO2 is introduced to TiO2. Furthermore, the photocatalytic reaction rate constants of degradation of rhodamine B solution with ZrO2/TiO2 composite film and pure TiO2 film under ultraviolet irradiation are measured as 0.0442 and 0.0186 h 1, respectively.
文摘Solid state NMR was successfully used to determine the proton spin-lattice relaxation time in the rotating frame (T1ρH) for systems based on polypropylene (PP) and PP with titanium dioxide (TiO<sub>2</sub>) organically modified or unmodified incorporated, in order to understand the molecular behavior of these systems. These techniques were employed in the samples organically modified and unmodified TiO<sub>2</sub> to investigate the effect of organic modification on the dispersion and distribution of the particles in the PP matrix. The results were analyzed in terms of the effect of the particles organic modified or not according to the intermolecular interaction in the composites. According to the T1ρH values, all composites showed at least two domains: the short values were related to the rigid part, which included the crystalline and amorphous phase constricted in it, while the longer times were attributed to the amorphous region, which had higher molecular mobility compared to the rigid region of the materials. The increase in the relaxation time parameter in the composites compared to the pure PP was associated to the strong interaction between titanium dioxide particles and the polymer chains. This effect was more pronounced for the systems containing organically modified TiO<sub>2</sub>. According to the results, it could be inferred that intermolecular interaction occurred in the CH<sub>2</sub> and CH groups, being more intense with CH<sub>2</sub> groups. Finally, the solid state NMR techniques were able to evaluate the molecular dynamics of those systems.
