SnO2-glaze composites were prepared by Sb-doped SnO2 and SiO2-CaO-Al2O3-B2O3 glaze. The composites changed from an electrical insulator to a conductor as the SnO2 content increased from Owt% to 90 wt% . The complex im...SnO2-glaze composites were prepared by Sb-doped SnO2 and SiO2-CaO-Al2O3-B2O3 glaze. The composites changed from an electrical insulator to a conductor as the SnO2 content increased from Owt% to 90 wt% . The complex impedance spectra of the fabricated composites were investigated in the frequency range of 100Hz-40 MHz and three kinds of typical shape of complex impedance spectra were recorded and analyzed. The ,spectrum is quite close to the model of conduction via nonohmic contactiug when the SnO2 content is relatively low, In high loading region, the spectrum shows the conduction pattern through ohmic contact chains . In the moderate loading region, the model is a mixture of the above two models. Equivalent circuit of the composite changes from resistor-capacitor circuit to resistor-inductor circuit as the content of SnO2 increases.展开更多
Compared with ordinary graphite anode,SnO_(2) possesses higher theoretical specifc capacity,rich raw materials and low price.While the severe volume expansion of SnO_(2) during lithium-ion extraction/intercalation lim...Compared with ordinary graphite anode,SnO_(2) possesses higher theoretical specifc capacity,rich raw materials and low price.While the severe volume expansion of SnO_(2) during lithium-ion extraction/intercalation limits its further application.To solve this problem,in this work the reduced graphene oxide(rGO)was introduced as volume bufer matrix of SnO_(2).Herein,SnO_(2)/rGO composite is obtained through one-step hydrothermal method.Three-dimensional structure of rGO could efectively hinder the polymerization of SnO_(2) nanoparticles and provide more lithium storage sites attributed to high specifc surface area and density defects.The initial discharge capacity of the composite cathode is 959 mA·h·g^(-1) and the capacity remained at 300 mA·h·g^(-1) after 1000 cycles at 1 C.It proved that the rGO added in the anode has a capacity contribution to the lithium-ion battery.It changes the capacity contribution mechanism from difusion process dominance to surface driven capacitive contribution.Due to the addition of rGO,the anode material gains stable structure and great conductivity.展开更多
为改善SnO_2-Fe_2O_3的电化学性能,通过一步水热法合成SnO_2-Fe_2O_3/rGO纳米复合材料,采用XRD、SEM、电化学工作站和蓝电电池测试系统,研究rGO加入量对SnO_2-Fe_2O_3/rGO复合材料的结构和电化学性能的影响.结果表明:rGO的掺入能很好地...为改善SnO_2-Fe_2O_3的电化学性能,通过一步水热法合成SnO_2-Fe_2O_3/rGO纳米复合材料,采用XRD、SEM、电化学工作站和蓝电电池测试系统,研究rGO加入量对SnO_2-Fe_2O_3/rGO复合材料的结构和电化学性能的影响.结果表明:rGO的掺入能很好地提高SnO_2-Fe_2O_3循环稳定性和倍率性能;对于SnO_2-Fe_2O_3/rGO50复合材料,在160 m A/g的电流密度下,100次循环后,放电比容量仍然保持596.9 m Ah/g,库仑效率为98%;即使在1 A/g的电流密度下,依然有366.6 m Ah/g的平均放电比容量.展开更多
The popularity of lithium–sulfur batteries has been increasing gradually due to their ultrahigh theoretical specific capacity and energy density. Nevertheless, they also have lots of drawbacks to be overcome, such as...The popularity of lithium–sulfur batteries has been increasing gradually due to their ultrahigh theoretical specific capacity and energy density. Nevertheless, they also have lots of drawbacks to be overcome, such as poor conductivity, severe volume expansion, and serious“shuttle effect”. In this work, reduced graphene oxide/molybdenum dioxide(rGO/MoO_(2)) composite is synthesized and applied to modify polypropylene separator. The modified polypropylene separator introduces synergistic tri-functions of physical adsorption, chemical interaction and catalytic effects, which can inhibit the“shuttle effect” and enhance the electrochemical performances of lithium-sulfur batteries. In the prepared r GO/MoO_(2) composite, the polar MoO_(2) chemically adsorbs the intermediate lithium polysulfide, while the rGO with good electrical conductivity not only acts as a physical barrier to prevent diffusion of polysulfide ions, but also improves the conversion efficiency of active material intercepted on the separator. As a consequence, the battery assembled with rGO/MoO_(2) modified polypropylene separator exhibits a reversible capacity of 757.5 mAh·g^(-1) after 200 cycles at0.2 C with a negligible capacity decay of 0.207% per cycle,which indicates a good long-period cycling stability. Furthermore, the rate performance and self-discharge suppression are also improved by introducing modified polypropylene separator. It shows that rGO/MoO_(2) composite is a promising material for separator modification in lithium-sulfur batteries.展开更多
SnO2-Li4Ti5O12 was prepared by sol-gel method using tin tetrachloride,lithium acetate,tetrabutylorthotitanate and aqueous ammonia as starting materials.The composite was characterized by thermogravimertric(TG)analysis...SnO2-Li4Ti5O12 was prepared by sol-gel method using tin tetrachloride,lithium acetate,tetrabutylorthotitanate and aqueous ammonia as starting materials.The composite was characterized by thermogravimertric(TG)analysis and differential thermal analysis(DTA),X-ray diffractometry(XRD)and transmission electron microscopy(TEM)combined with electrochemical tests.The results show that SnO2-Li4Ti5O12 composite derived by sol-gel technique is a nanocomposite with core-shell structure, and the amorphous Li4Ti5O12 layer with 20?40 nm in thickness is coated on the surface of SnO2 particles.Electrochemical tests show that SnO2-Li4Ti5O12 composite delivers a reversible capacity of 688.7 mA·h/g at 0.1C and 93.4%of that is retained after 60 cycles at 0.2C.The amorphous Li4Ti5O12 in composite can accommodate the volume change of SnO2 electrode and prevent the small and active Sn particles from aggregating into larger and inactive Sn clusters during the cycling effectively,and enhance the cycling stability of SnO2 electrode significantly.展开更多
Au-Pt/SnO2/GC composite electrode was prepared by self-assembling Au-Pt nanoparticles on SnO2 film, which was deposited on actived glassy carbon （GC）. Atomic force microscopy （AFM） and scanning electron microscopy...Au-Pt/SnO2/GC composite electrode was prepared by self-assembling Au-Pt nanoparticles on SnO2 film, which was deposited on actived glassy carbon （GC）. Atomic force microscopy （AFM） and scanning electron microscopy （SEM） images revealed that dense and uniform Au-Pt particles with 25-nm diameter were dispersed on SnO2 film. X-ray photoelectron spectroscopy （XPS） results proved that there was an interaction between Au-Pt nanoparticles and SnO2 support. Electrochemical experiments showed that Au-Pt/SnOz/GC composite electrode had a good electrocatalytic activity to the oxidation of methanol展开更多
All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid elect...All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid electrolytes with favorable electrode/electrolyte interface compatibility and high ionic conductivity in a simple and scalable manner.Hence,the oxygen-vacancy-rich Gd-doped SnO_(2) nanotubes(GDS NTs)are innovatively prepared and applied to the electrolyte of all-solid-state lithium metal batteries for the first time.The addition of GDS NTs can validly construct long-range co ntinuous ion transport networks in the poly(ethylene oxide)(PEO)-based system and greatly improve the mechanical properties of the electrolyte.Compared to the PEO-based electrolyte,the composite electrolyte displays a higher lithium ion conductivity of 2.41×10^(-4) S cm^(-1) at 30℃,a higher lithium ion transference number up to 0.62 and a wider electrochemical window of 5 V at 50℃.In addition,the composite electrolyte manifests outstanding compatibility with high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathode,LiFePO4 cathode and lithium metal anode.The assembled Li/Li symmetric battery exhibits stable Li plating/stripping cycling performance,which can cycle steadily for 1500 h at a capacity of 0.3 mA h cm^(-2).And Li/LiFePO4 battery still maintains a high capacity of 131.54 mA h g^(-1) at 0.5C after 800 cycles,which has a superior capacity retention rate of 93.2%.The obtained novel composite electrolyte has promising application prospects in the field of all-solid-state lithium metal cells.展开更多
基金Funded by Guangdong Provincal Natural Science Foundation(No.05006564) and Science &Technology Programof GuangdongProvince(No.2004B10301007)
文摘SnO2-glaze composites were prepared by Sb-doped SnO2 and SiO2-CaO-Al2O3-B2O3 glaze. The composites changed from an electrical insulator to a conductor as the SnO2 content increased from Owt% to 90 wt% . The complex impedance spectra of the fabricated composites were investigated in the frequency range of 100Hz-40 MHz and three kinds of typical shape of complex impedance spectra were recorded and analyzed. The ,spectrum is quite close to the model of conduction via nonohmic contactiug when the SnO2 content is relatively low, In high loading region, the spectrum shows the conduction pattern through ohmic contact chains . In the moderate loading region, the model is a mixture of the above two models. Equivalent circuit of the composite changes from resistor-capacitor circuit to resistor-inductor circuit as the content of SnO2 increases.
基金Supported by National Natural Science Foundation of China(Grant No.61774022)Natural Science Foundation of Guangdong Province(Grant No.2022A1515011449)+2 种基金Special Program for Science Research Foundation of the Higher Education Institutions of Guangdong Providence(Grant No.2020ZDZX2052)2020 Li Ka Shing Foundation Cross-Disciplinary Research Grant(Grant No.2020LKSFG01A)Research.Start-up Foundation of Shantou University(Grant No.NTF20024).
文摘Compared with ordinary graphite anode,SnO_(2) possesses higher theoretical specifc capacity,rich raw materials and low price.While the severe volume expansion of SnO_(2) during lithium-ion extraction/intercalation limits its further application.To solve this problem,in this work the reduced graphene oxide(rGO)was introduced as volume bufer matrix of SnO_(2).Herein,SnO_(2)/rGO composite is obtained through one-step hydrothermal method.Three-dimensional structure of rGO could efectively hinder the polymerization of SnO_(2) nanoparticles and provide more lithium storage sites attributed to high specifc surface area and density defects.The initial discharge capacity of the composite cathode is 959 mA·h·g^(-1) and the capacity remained at 300 mA·h·g^(-1) after 1000 cycles at 1 C.It proved that the rGO added in the anode has a capacity contribution to the lithium-ion battery.It changes the capacity contribution mechanism from difusion process dominance to surface driven capacitive contribution.Due to the addition of rGO,the anode material gains stable structure and great conductivity.
文摘为改善SnO_2-Fe_2O_3的电化学性能,通过一步水热法合成SnO_2-Fe_2O_3/rGO纳米复合材料,采用XRD、SEM、电化学工作站和蓝电电池测试系统,研究rGO加入量对SnO_2-Fe_2O_3/rGO复合材料的结构和电化学性能的影响.结果表明:rGO的掺入能很好地提高SnO_2-Fe_2O_3循环稳定性和倍率性能;对于SnO_2-Fe_2O_3/rGO50复合材料,在160 m A/g的电流密度下,100次循环后,放电比容量仍然保持596.9 m Ah/g,库仑效率为98%;即使在1 A/g的电流密度下,依然有366.6 m Ah/g的平均放电比容量.
基金financially supported by the National Natural Science Foundation of China (Nos.21606065 and 21676067)Anhui Provincial Natural Science Foundation (Nos.1708085QE98 and 1908085QE178)+1 种基金the Fundamental Research Funds for the Central Universities (Nos.JZ2017YYPY0253,JZ2017HGTB0198,JZ2018HGBZ0138 and PA2020GDGP0054)the Opening Project of CAS Key Laboratory of Materials for Energy Conversion (No.KF2018003)。
文摘The popularity of lithium–sulfur batteries has been increasing gradually due to their ultrahigh theoretical specific capacity and energy density. Nevertheless, they also have lots of drawbacks to be overcome, such as poor conductivity, severe volume expansion, and serious“shuttle effect”. In this work, reduced graphene oxide/molybdenum dioxide(rGO/MoO_(2)) composite is synthesized and applied to modify polypropylene separator. The modified polypropylene separator introduces synergistic tri-functions of physical adsorption, chemical interaction and catalytic effects, which can inhibit the“shuttle effect” and enhance the electrochemical performances of lithium-sulfur batteries. In the prepared r GO/MoO_(2) composite, the polar MoO_(2) chemically adsorbs the intermediate lithium polysulfide, while the rGO with good electrical conductivity not only acts as a physical barrier to prevent diffusion of polysulfide ions, but also improves the conversion efficiency of active material intercepted on the separator. As a consequence, the battery assembled with rGO/MoO_(2) modified polypropylene separator exhibits a reversible capacity of 757.5 mAh·g^(-1) after 200 cycles at0.2 C with a negligible capacity decay of 0.207% per cycle,which indicates a good long-period cycling stability. Furthermore, the rate performance and self-discharge suppression are also improved by introducing modified polypropylene separator. It shows that rGO/MoO_(2) composite is a promising material for separator modification in lithium-sulfur batteries.
基金Project(20873054)supported by the National Natural Science Foundation of ChinaProject(2005037700)supported by Postdoctoral Science Foundation of China+2 种基金Project(07JJ3014)supported by Hunan Provincial Natural Science Foundation of ChinaProject(07A058)supported by Scientific Research Fund of Hunan Provincial Education DepartmentProject(2004107)supported by Postdoctoral Science Foundation of Central South University
文摘SnO2-Li4Ti5O12 was prepared by sol-gel method using tin tetrachloride,lithium acetate,tetrabutylorthotitanate and aqueous ammonia as starting materials.The composite was characterized by thermogravimertric(TG)analysis and differential thermal analysis(DTA),X-ray diffractometry(XRD)and transmission electron microscopy(TEM)combined with electrochemical tests.The results show that SnO2-Li4Ti5O12 composite derived by sol-gel technique is a nanocomposite with core-shell structure, and the amorphous Li4Ti5O12 layer with 20?40 nm in thickness is coated on the surface of SnO2 particles.Electrochemical tests show that SnO2-Li4Ti5O12 composite delivers a reversible capacity of 688.7 mA·h/g at 0.1C and 93.4%of that is retained after 60 cycles at 0.2C.The amorphous Li4Ti5O12 in composite can accommodate the volume change of SnO2 electrode and prevent the small and active Sn particles from aggregating into larger and inactive Sn clusters during the cycling effectively,and enhance the cycling stability of SnO2 electrode significantly.
基金supported by the High-Tech Research and Development Program of China (No. 2007AA03Z219)the Funding Project for Academic Human Resources Development in Institutions of Higher Learning under the Jurisdiction of Beijing Municipality, and the Beijing Natural Science Foundation (No. 207001)
文摘Au-Pt/SnO2/GC composite electrode was prepared by self-assembling Au-Pt nanoparticles on SnO2 film, which was deposited on actived glassy carbon （GC）. Atomic force microscopy （AFM） and scanning electron microscopy （SEM） images revealed that dense and uniform Au-Pt particles with 25-nm diameter were dispersed on SnO2 film. X-ray photoelectron spectroscopy （XPS） results proved that there was an interaction between Au-Pt nanoparticles and SnO2 support. Electrochemical experiments showed that Au-Pt/SnOz/GC composite electrode had a good electrocatalytic activity to the oxidation of methanol
基金supported by the National Natural Science Foundation of China(52203066,51973157,61904123,51873152)the Tianjin Natural Science Foundation(18JCQNJC02900)+3 种基金the Science and Technology Plans of Tianjin(19PTSYJC00010)the Tianjin Research Innovation Project for Postgraduate Students(2021YJSB234)the Science&Technology Development Fund of Tianjin Education Commission for Higher Education(2018KJ196)State Key Laboratory of Membrane and Membrane Separation,Tiangong University。
文摘All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid electrolytes with favorable electrode/electrolyte interface compatibility and high ionic conductivity in a simple and scalable manner.Hence,the oxygen-vacancy-rich Gd-doped SnO_(2) nanotubes(GDS NTs)are innovatively prepared and applied to the electrolyte of all-solid-state lithium metal batteries for the first time.The addition of GDS NTs can validly construct long-range co ntinuous ion transport networks in the poly(ethylene oxide)(PEO)-based system and greatly improve the mechanical properties of the electrolyte.Compared to the PEO-based electrolyte,the composite electrolyte displays a higher lithium ion conductivity of 2.41×10^(-4) S cm^(-1) at 30℃,a higher lithium ion transference number up to 0.62 and a wider electrochemical window of 5 V at 50℃.In addition,the composite electrolyte manifests outstanding compatibility with high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathode,LiFePO4 cathode and lithium metal anode.The assembled Li/Li symmetric battery exhibits stable Li plating/stripping cycling performance,which can cycle steadily for 1500 h at a capacity of 0.3 mA h cm^(-2).And Li/LiFePO4 battery still maintains a high capacity of 131.54 mA h g^(-1) at 0.5C after 800 cycles,which has a superior capacity retention rate of 93.2%.The obtained novel composite electrolyte has promising application prospects in the field of all-solid-state lithium metal cells.
