[Objective] The aim was to study the formation and development of a heavy snow in Benxi area. [Method] Based on conventional meteorological data, the formation and development of a heavy snow in Benxi area from Decemb...[Objective] The aim was to study the formation and development of a heavy snow in Benxi area. [Method] Based on conventional meteorological data, the formation and development of a heavy snow in Benxi area from December 4th to 5th in 2009 were analyzed from the aspects of weather situation evolution and physical quantity field feature. [Result] The heavy snow was caused by upper trough and North China cyclone. In this process, there was upper level divergence and lower level convergence over Benxi area, and it was warm at low attitude and cold at high attitude; southwest jet at low attitude transported water vapor from Bohai Sea to eastern Liaoning, which provided good water vapor condition for snow, but it didn’t reach heavy snow due to inadequate ascending force. The development of Ural Mountains high ridge played an important role in the snow process and the strengthened high ridge moving northward was beneficial to the southward movement of cold air and deepening of upper trough. Analysis on physical quantity field could provide reference for predicting beginning and ending time and strength of heavy snow. [Conclusion] The study could provide basis for the forecast of heavy snow.展开更多
In India, with ever increasing population and stress on natural resources, especially water, rejuvenation of rainwater harvesting (RWH) technique which was forgotten over the days is becoming very essential. Large num...In India, with ever increasing population and stress on natural resources, especially water, rejuvenation of rainwater harvesting (RWH) technique which was forgotten over the days is becoming very essential. Large number of RWH methods that are available in the literature are demand specific and site specific, since RWH system depends on the topography, land use, land cover, rainfall and demand pattern. Thus for each and every case, a detailed evaluation of RWH structures is required for implementation, including the analy-sis of hydrology, topography and other aspects like site availability and economics, however a common methodology could be evolved. The present study was aimed at evaluation of various RWH techniques in order to identify the most appropriate technique suitable for a large scale industrial area to meet its daily wa-ter demand. An attempt is made to determine the volume of water to be stored using mass balance method, Ripple diagram method, analytical method, and sequent peak algorithm method. Based on various satisfying criteria, analytical hierarchy process (AHP) is employed to determine the most appropriate type of RWH method and required number of RWH structures in the study area. If economy alone is considered along with hydrological and site specific parameters, recharging the aquifer has resulted as a better choice. However other criteria namely risk, satisfaction in obtaining required volume of water for immediate utilization etc. has resulted in opting for concrete storage structures method. From the results it is found that AHP, if used with all possible criteria can result in a better tool for evaluation of RWH methods and structures. This RWH structures not only meets the demand but saves transportation cost of water and reduces the dependability of the industry on irrigation reservoir. Besides monetary benefits it is hoped that the micro environment inside the industry will improve due to the cooling effect of the stored water.展开更多
Mechanism of frictional vibration and the difference of kinctic-static friction is an open question. Research shows that the change of real area of contact during transition process of friction results in the phenomen...Mechanism of frictional vibration and the difference of kinctic-static friction is an open question. Research shows that the change of real area of contact during transition process of friction results in the phenomena mentioned above. In substance, the F-Vr, descent and F-T ascent characters are caused by A-Vr, and A-T characters respectively. Based on ultrasonic experiment the mechanism of the phenomena is explained and the frictional formulas using the parameter-real area of contact are given in this article.展开更多
[Objective] The research aimed to study winter operation process of the surface flow constructed wetland in ＂rianjin area. [Method] In view of climate characteristics in Tianjin, by the way of running under the ice, ...[Objective] The research aimed to study winter operation process of the surface flow constructed wetland in ＂rianjin area. [Method] In view of climate characteristics in Tianjin, by the way of running under the ice, winter operation experiment of the surface flow constructed wetland in Tianjin was conducted, with the expectation to get some useful process parameters to run such systems in North China in winter. [ Result] Although purification effect of the sewage by surface flow constructed wetland in winter was worse than that in other seasons （ average reduction of about 20%）, surface flow constructed wetland running under the ice was feasible in Tianjin area. When surface flow constructed wetland in North China ran under ice in winter, it was suggested that the outlet must be located in a low position to prevent to be completely frozen, and running water depth should not be less than 50 -60 cm. The hydraulic load could be raised on the basis of reflux, and hydraulic retention time should maintain less than 4 d to keep water-soil interface not freezing. Inlet water depth should be increased as much as possible to improve temperature in the system. V Conclusion1 The research could provide reference for promotion and application of the surface flow constructed wetland in North China.展开更多
Marine strata in the Jianghan Plain area are widely distributed with a total depth of more than 8,000 m from the Upper Sinian to the Middle Triassic. Six reservoir caprock units, named Z-C2, C2-O, S, D--C, P and T1, c...Marine strata in the Jianghan Plain area are widely distributed with a total depth of more than 8,000 m from the Upper Sinian to the Middle Triassic. Six reservoir caprock units, named Z-C2, C2-O, S, D--C, P and T1, can be identified with each epoch. The geology, stratigraphy, drilling, oil testing and other basic data as well as the measured inclusion and strontium isotope data in the study area are used in the analysis of the formation and evolution process of marine petroliferous reservoirs in the Jianghan Plain area. This study aims to provide a scientific basis for the further exploration of hydrocarbons in the Jianghan Plain and reduce the risks by analyzing the key factors for hydrocarbon accumulation in the marine strata. Our findings show that in the Lower Palaeozoic hydrocarbon reservoir, oil/gas migration and accumulation chiefly occurred in the early period of the Early Yanshanian, and the hydrocarbon reservoir was destroyed in the middle-late period of the Early Yanshanian. In the Lower Triassic-Carboniferous hydrocarbon reservoir, oil/gas migration and accumulation chiefly occurred in the Early Yanshanian, and the hydrocarbon reservoir suffered destruction from the Late Yanshanian to the Early Himalayanian. The preservation conditions of the marine strata in the Jianghan Plain area have been improved since the Late Himalayanian. However, because all source beds have missed the oil/gas generation fastigium and lost the capacity to generate secondary hydrocarbon, no reaccumulation of hydrocarbons can be detected in the study area＇s marine strata. No industrially exploitable oil/gas reservoir has been discovered in the marine strata of Jianghan Plain area since exploration began in 1958. This study confirms that petroliferous reservoirs in the marine strata have been completely destroyed, and that poor preservation conditions are the primary factor leading to unsuccessful hydrocarbon exploration. It is safely concluded that hydrocarbon exploration in the marine strata of the study area is quite risky.展开更多
The transport and deposition of particulate organic matter (POM) in river streams has recently received much attention as one of important ecological processes in rivers. We focused on interacted behaviors of sand par...The transport and deposition of particulate organic matter (POM) in river streams has recently received much attention as one of important ecological processes in rivers. We focused on interacted behaviors of sand particles in bed load and POM in vegetated area on sand bars. The purpose of this study is to clarify the characteristics of deposition of POM with bed load on sandbars with the riparian vegetation. A basic experiment on POM transport and deposition with vegetation is conducted in a laboratory flume. It demonstrates that several issues still remain to be future investigated. In particular, the shear due to the bed roughness in the vegetated area and the transport and deposition process of sand particles and POM are required to be described by the proper modeling which will be introduced into a simulation model of various fluvial processes. The main results of this study are that ripples are formed by bed load in riparian vegetation and POM deposition is promoted by ripple behavior. Based on these results, the POM deposition with ripples in vegetated area is described by a conceptual model which will affect various aspects in ecosystem management based on fluvial processes.展开更多
文摘[Objective] The aim was to study the formation and development of a heavy snow in Benxi area. [Method] Based on conventional meteorological data, the formation and development of a heavy snow in Benxi area from December 4th to 5th in 2009 were analyzed from the aspects of weather situation evolution and physical quantity field feature. [Result] The heavy snow was caused by upper trough and North China cyclone. In this process, there was upper level divergence and lower level convergence over Benxi area, and it was warm at low attitude and cold at high attitude; southwest jet at low attitude transported water vapor from Bohai Sea to eastern Liaoning, which provided good water vapor condition for snow, but it didn’t reach heavy snow due to inadequate ascending force. The development of Ural Mountains high ridge played an important role in the snow process and the strengthened high ridge moving northward was beneficial to the southward movement of cold air and deepening of upper trough. Analysis on physical quantity field could provide reference for predicting beginning and ending time and strength of heavy snow. [Conclusion] The study could provide basis for the forecast of heavy snow.
文摘In India, with ever increasing population and stress on natural resources, especially water, rejuvenation of rainwater harvesting (RWH) technique which was forgotten over the days is becoming very essential. Large number of RWH methods that are available in the literature are demand specific and site specific, since RWH system depends on the topography, land use, land cover, rainfall and demand pattern. Thus for each and every case, a detailed evaluation of RWH structures is required for implementation, including the analy-sis of hydrology, topography and other aspects like site availability and economics, however a common methodology could be evolved. The present study was aimed at evaluation of various RWH techniques in order to identify the most appropriate technique suitable for a large scale industrial area to meet its daily wa-ter demand. An attempt is made to determine the volume of water to be stored using mass balance method, Ripple diagram method, analytical method, and sequent peak algorithm method. Based on various satisfying criteria, analytical hierarchy process (AHP) is employed to determine the most appropriate type of RWH method and required number of RWH structures in the study area. If economy alone is considered along with hydrological and site specific parameters, recharging the aquifer has resulted as a better choice. However other criteria namely risk, satisfaction in obtaining required volume of water for immediate utilization etc. has resulted in opting for concrete storage structures method. From the results it is found that AHP, if used with all possible criteria can result in a better tool for evaluation of RWH methods and structures. This RWH structures not only meets the demand but saves transportation cost of water and reduces the dependability of the industry on irrigation reservoir. Besides monetary benefits it is hoped that the micro environment inside the industry will improve due to the cooling effect of the stored water.
文摘Mechanism of frictional vibration and the difference of kinctic-static friction is an open question. Research shows that the change of real area of contact during transition process of friction results in the phenomena mentioned above. In substance, the F-Vr, descent and F-T ascent characters are caused by A-Vr, and A-T characters respectively. Based on ultrasonic experiment the mechanism of the phenomena is explained and the frictional formulas using the parameter-real area of contact are given in this article.
基金Supported by Special Project of the Science Research in Public Service Industry,Ministry of Water Resources,China(2011-BH140002)
文摘[Objective] The research aimed to study winter operation process of the surface flow constructed wetland in ＂rianjin area. [Method] In view of climate characteristics in Tianjin, by the way of running under the ice, winter operation experiment of the surface flow constructed wetland in Tianjin was conducted, with the expectation to get some useful process parameters to run such systems in North China in winter. [ Result] Although purification effect of the sewage by surface flow constructed wetland in winter was worse than that in other seasons （ average reduction of about 20%）, surface flow constructed wetland running under the ice was feasible in Tianjin area. When surface flow constructed wetland in North China ran under ice in winter, it was suggested that the outlet must be located in a low position to prevent to be completely frozen, and running water depth should not be less than 50 -60 cm. The hydraulic load could be raised on the basis of reflux, and hydraulic retention time should maintain less than 4 d to keep water-soil interface not freezing. Inlet water depth should be increased as much as possible to improve temperature in the system. V Conclusion1 The research could provide reference for promotion and application of the surface flow constructed wetland in North China.
基金the subsidization of a Major Project of Chinese National Programs for Fundamental Research and Development (973 Program, No. 2012CB214805)supported by the Chinese National Natural Science Foundation (No. 41372141)
文摘Marine strata in the Jianghan Plain area are widely distributed with a total depth of more than 8,000 m from the Upper Sinian to the Middle Triassic. Six reservoir caprock units, named Z-C2, C2-O, S, D--C, P and T1, can be identified with each epoch. The geology, stratigraphy, drilling, oil testing and other basic data as well as the measured inclusion and strontium isotope data in the study area are used in the analysis of the formation and evolution process of marine petroliferous reservoirs in the Jianghan Plain area. This study aims to provide a scientific basis for the further exploration of hydrocarbons in the Jianghan Plain and reduce the risks by analyzing the key factors for hydrocarbon accumulation in the marine strata. Our findings show that in the Lower Palaeozoic hydrocarbon reservoir, oil/gas migration and accumulation chiefly occurred in the early period of the Early Yanshanian, and the hydrocarbon reservoir was destroyed in the middle-late period of the Early Yanshanian. In the Lower Triassic-Carboniferous hydrocarbon reservoir, oil/gas migration and accumulation chiefly occurred in the Early Yanshanian, and the hydrocarbon reservoir suffered destruction from the Late Yanshanian to the Early Himalayanian. The preservation conditions of the marine strata in the Jianghan Plain area have been improved since the Late Himalayanian. However, because all source beds have missed the oil/gas generation fastigium and lost the capacity to generate secondary hydrocarbon, no reaccumulation of hydrocarbons can be detected in the study area＇s marine strata. No industrially exploitable oil/gas reservoir has been discovered in the marine strata of Jianghan Plain area since exploration began in 1958. This study confirms that petroliferous reservoirs in the marine strata have been completely destroyed, and that poor preservation conditions are the primary factor leading to unsuccessful hydrocarbon exploration. It is safely concluded that hydrocarbon exploration in the marine strata of the study area is quite risky.
文摘The transport and deposition of particulate organic matter (POM) in river streams has recently received much attention as one of important ecological processes in rivers. We focused on interacted behaviors of sand particles in bed load and POM in vegetated area on sand bars. The purpose of this study is to clarify the characteristics of deposition of POM with bed load on sandbars with the riparian vegetation. A basic experiment on POM transport and deposition with vegetation is conducted in a laboratory flume. It demonstrates that several issues still remain to be future investigated. In particular, the shear due to the bed roughness in the vegetated area and the transport and deposition process of sand particles and POM are required to be described by the proper modeling which will be introduced into a simulation model of various fluvial processes. The main results of this study are that ripples are formed by bed load in riparian vegetation and POM deposition is promoted by ripple behavior. Based on these results, the POM deposition with ripples in vegetated area is described by a conceptual model which will affect various aspects in ecosystem management based on fluvial processes.
