The recently reported silicon/graphite(Si/Gr)composite electrode with a layered structure is a promising approach to achieve high capacity and stable cycling of Si-based electrodes in lithium-ion batteries.However,the...The recently reported silicon/graphite(Si/Gr)composite electrode with a layered structure is a promising approach to achieve high capacity and stable cycling of Si-based electrodes in lithium-ion batteries.However,there is still a need to clarify why particular layered structures are effective and why others are ineffective or even detrimental.In this work,an unreported mechanism dominated by the porosity evolution of electrodes is proposed for the degradation behavior of layered Si/Gr electrodes.First,the effect of layering sequence on the overall electrode performance is investigated experimentally,and the results suggest that the cycling performance of the silicon-on-graphite(SG)electrode is much superior to that of the graphite-on-silicon electrode.To explain this phenomenon,a coupled mechanical-electrochemical porous electrode model is developed,in which the porosity is affected by the silicon expansion and the local constraints.The modeling results suggest that the weaker constraint of the silicon layer in the SG electrode leads to a more insignificant decrease in porosity,and consequently,the more stable cycling performance.The findings of this work provide new insights into the structural design of Si-based electrodes.展开更多
Acetolactate synthase(ALS)-targeting herbicides are among the most widely used weed-control chemicals globally.Mutations in the ALS gene can confer herbicide resistance in crops,thereby allowing selective elimination ...Acetolactate synthase(ALS)-targeting herbicides are among the most widely used weed-control chemicals globally.Mutations in the ALS gene can confer herbicide resistance in crops,thereby allowing selective elimination of weeds without harming crops.Herbicide-resistant ALS alleles were initially discovered in weeds and subsequently developed through artificial mutagenesis techniques.With the advancement of CRISPR/Cas technologies,various genome-editing tools are now available to introduce these resistant alleles,as well as novel variants,into diverse crop species.Moreover,emerging methodologies,such as directed evolution,enable the generation and screening of large populations of random ALS mutants.Consequently,ALS has become one of the most extensively targeted genes in plant gene evolution.This paper provides a comprehensive overview of both conventional and recently developed strategies for ALS evolution,with particular emphasis on CRISPR/Cas-based genome editing and directed evolution.Future perspectives on technological application are also discussed.By advancing our understanding of herbicide-resistant ALS allele development for crop improvement,these methodologies may also pave the way for their application to the evolution of other agronomically important genes.展开更多
A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and...A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.展开更多
Combining the phase-field method and the moving boundary method,a three-dimensional phase-field simulation was conducted for the growth and grain evolution of Ti films deposited by physical vapor deposition under diff...Combining the phase-field method and the moving boundary method,a three-dimensional phase-field simulation was conducted for the growth and grain evolution of Ti films deposited by physical vapor deposition under different deposition rates and grain orientations.The evolution of grain morphology and grain orientation was also taken into consideration.Simulation results show that at lower deposition rates,the surface of the formed Ti film exhibits a distinct oriented texture structure.The surface roughness of the Ti film is positively correlated with the grain misorientation.Moreover,the surface roughness obtained from the simulation is in good agreement with the experiment results.展开更多
The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecul...The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecules and{[Co2(BINDI)(DMA)_(2)]·DMA}_(n)(Co-MOF,H4BINDI=N,N'-bis(5-isophthalic acid)naphthalenediimide,DMA=N,N-dimethylacetamide)was synthesized via a one-pot method,leveragingπ-πinteractions between pyrene and Co-MOF to modulate electrical conductivity.Results demonstrate that the Py@Co-MOF catalyst exhibited significantly enhanced OER performance compared to pure Co-MOF or pyrene-based electrodes,achieving an overpotential of 246 mV at a current density of 10 mA·cm^(-2) along with excellent stability.Density functional theory(DFT)calculations reveal that the formation of O*in the second step is the rate-determining step(RDS)during the OER process on Co-MOF,with an energy barrier of 0.85 eV due to the weak adsorption affinity of the OH*intermediate for Co sites.CCDC:2419276.展开更多
A new,cost-effective porous polymer composite was developed by reinforcing polypropylene(PP)with cenosphere particles.This study investigates how the composite’s dielectric properties are affected by their porosity.D...A new,cost-effective porous polymer composite was developed by reinforcing polypropylene(PP)with cenosphere particles.This study investigates how the composite’s dielectric properties are affected by their porosity.Dielectric constant(ε′)measurements were taken over a range of frequencies at roomtemperature.A theoreticalmodel was developed to explain the electrical conductivity of the porous PP/cenosphere composites.The study thoroughly examined how the inclusion of cenosphere particles influenced key electrical parameters,including dielectric constant,dissipation factor(tanδ),DC(direct current)conductivity,and AC(alternating current)conductivity.The results revealed that increasing the cenosphere content caused a decrease in the dielectric constant,while the dissipation factor increased.The developed porous PP/cenosphere composite exhibits a unique balance of low dielectric constant,lightweight structure making it suitable for several practical applications.Its low dielectric constant and reduced DC conductivity make it an excellent candidate for electronic packaging,insulating layers,and high-frequency components,where minimal energy loss and signal interference are required.The lightweight nature of the cenosphere-reinforced structure also suggests potential use in aerospace and automotive industries for lightweight insulation panels or structural components.Furthermore,its cost-effectiveness and tunable porosity could enable applications in microwave substrates,radar-absorbing materials,and energy-efficient building materials where dielectric control and weight reduction are critical.Additionally,DC conductivity was found to decline with higher cenosphere concentrations.The theoretical model was in good agreement with the experimental data.展开更多
The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor ...The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.展开更多
The augmented evolution equation is established under the framework of the Variation Evolving Method(VEM)that seeks optimal solutions by solving the transformed Initial-Value Problems(IVPs).To improve the numerical pe...The augmented evolution equation is established under the framework of the Variation Evolving Method(VEM)that seeks optimal solutions by solving the transformed Initial-Value Problems(IVPs).To improve the numerical performance,its compact form is developed herein.Through replacing the states and costates variation evolution with that of the controls,the dimension-reduced Evolution Partial Differential Equation(EPDE)only solves the control variables along the variation time to get the optimal solution,and the initial conditions for the definite solution may be arbitrary.With this equation,the scale of the resulting IVPs,obtained via the semi-discrete method,is significantly reduced and they may be solved with common Ordinary Differential Equation(ODE)integration methods conveniently.Meanwhile,the state and the costate dynamics share consistent stability in the numerical computation and this avoids the intrinsic numerical difficulty as in the indirect methods.Numerical examples are solved and it is shown that the compact form evolution equation outperforms the primary form in the precision,and the efficiency may be higher for the dense discretization.Actually,it is uncovered that the compact form of the augmented evolution equation is a continuous realization of the Newton type iteration mechanism.展开更多
While methodology for determining the mode of evolution in coding sequences has been well established,evaluation of adaptation events in emerging types of phenotype data needs further development.Here,we propose an an...While methodology for determining the mode of evolution in coding sequences has been well established,evaluation of adaptation events in emerging types of phenotype data needs further development.Here,we propose an analysis framework(expression variance decomposition,EVaDe)for comparative single-cell expression data based on phenotypic evolution theory.After decomposing the gene expression variance into separate components,we use two strategies to identify genes exhibiting large between-taxon expression divergence and small within-cell-type expression noise in certain cell types,attributing this pattern to putative adaptive evolution.In a dataset of primate prefrontal cortex,we find that such humanspecific key genes enrich with neurodevelopment-related functions,while most other genes exhibit neutral evolution patterns.Specific neuron types are found to harbor more of these key genes than other cell types,thus likely to have experienced more extensive adaptation.Reassuringly,at the molecular sequence level,the key genes are significantly associated with the rapidly evolving conserved non-coding elements.An additional case analysis comparing the naked mole-rat(NMR)with the mouse suggests that innateimmunity-related genes and cell types have undergone putative expression adaptation in NMR.Overall,the EVaDe framework may effectively probe adaptive evolution mode in single-cell expression data.展开更多
The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-cast...The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-casting research.In this work,the combined effect of shot sleeve materials and slow shot speeds on porosity,microstructure and mechanical properties of a newly designed HPDC Al-Si alloy was investigated.Results show that employing a ceramic shot sleeve or increasing the slow shot speed significantly reduces both the average size and area fraction of externally solidified crystals(ESCs),as well as the average pore size and volume fraction.When the slow shot speed is increased from 0.05 m·s^(-1)to 0.1 m·s^(-1),the pore volume fraction decreases by 10.2%in steel-shot-sleeve samples,compared to a substantial 67.1%reduction in ceramic-shot-sleeve samples.At a slow shot speed of 0.1 m·s^(-1),castings produced with a ceramic shot sleeve exhibit superior mechanical properties:8.3%higher yield strength,17.4%greater tensile strength,and an 81.4%improvement in elongation,relative to those from a steel shot sleeve.These findings provide valuable insights for minimizing porosity and coarse ESCs in die castings,offering promising potential for broader industrial applications.展开更多
Chlorite coats are believed to inhibit quartz cementation and preserve deeply-buried sandstone porosity.However,geologists face numerous challenges in evaluating the influences of chlorite coats in real cases.To tackl...Chlorite coats are believed to inhibit quartz cementation and preserve deeply-buried sandstone porosity.However,geologists face numerous challenges in evaluating the influences of chlorite coats in real cases.To tackle these challenges,this work reviewed a large number of case studies to discuss the proper way to evaluate their role using petrography.The following five main conclusions were drawn:(1)Compared to other coat parameters,coat coverage is more reliable in evaluating the influence of chlorite coats on quartz cements.(2)In addition to chlorite coats,quartz growth is influenced by multiple factors such as temperature,while sandstone porosity is affected by various factors including mechanical compaction;therefore,when evaluating the influence of chlorite coats,geologists should take these factors into account.(3)Even if no negative correlation exists between chlorite coats and quartz cements,and no positive correlation is observed between chlorite coats and sandstone porosity,one cannot simply conclude that chlorite coats do not inhibit quartz cements and protect sandstone porosity.(4)Chlorite coats can significantly occupy pore space,leading to a net porosity decrease.(5)Chlorite coats can undergo significantly dissolution,while whether this phenomenon is ubiquitous remains underexplored.展开更多
In modern construction,Lightweight Aggregate Concrete(LWAC)has been recognized as a vital material of concern because of its unique properties,such as reduced density and improved thermal insulation.Despite the extens...In modern construction,Lightweight Aggregate Concrete(LWAC)has been recognized as a vital material of concern because of its unique properties,such as reduced density and improved thermal insulation.Despite the extensive knowledge regarding its macroscopic properties,there is a wide knowledge gap in understanding the influence of microscale parameters like aggregate porosity and volume ratio on the mechanical response of LWAC.This study aims to bridge this knowledge gap,spurred by the need to enhance the predictability and applicability of LWAC in various construction environments.With the help of advanced numerical methods,including the finite element method and a random circular aggregate model,this study critically evaluates the role played by these microscale factors.We found that an increase in the aggregate porosity from 23.5%to 48.5%leads to a drastic change of weakness from the bonding interface to the aggregate,reducing compressive strength by up to 24.2%and tensile strength by 27.8%.Similarly,the increase in the volume ratio of lightweight aggregate from 25%to 40%leads to a reduction in compressive strength by 13.0%and tensile strength by 9.23%.These results highlight the imperative role of microscale properties on the mechanical properties of LWAC.By supplying precise quantitative details on the effect of porosity and aggregate volume ratio,this research makes significant contributions to construction materials science by providing useful recommendations for the creation and optimization of LWAC with improved performance and sustainability in construction.展开更多
This study presents a comprehensive phylogenetic analysis on Batrachospermaceae based on key taxonomic identifiers(rbcL,psaA,psbA,and COI-5P)from some genera.To systematically explore the phylogenetic relationships an...This study presents a comprehensive phylogenetic analysis on Batrachospermaceae based on key taxonomic identifiers(rbcL,psaA,psbA,and COI-5P)from some genera.To systematically explore the phylogenetic relationships and taxonomy within Batrachospermaceae,we integrated molecular and morphological data,and explored the phylogeny,character evolution,and ancestral geographical origin and provided a theoretical support for the classification and geographic origination of Batrachospermaceae.Our findings reveal distinct relationships within the phylogenetic tree.Notably,10 genera(Sirodotia,Batrachospermum,Tuomeya,Volatus,Lympha,Nothocladus,Torularia,Sheathia,Nocturama,and Petrohua)are closely associated in the rbcL phylogenetic tree.Additionally,four genera(Kumanoa,Hoefkenia,Notohesperus,and Virescentia)exhibit high support ratios,indicating their close interrelations.Other genera,including Paludicola,Visia,Acarposporophycos,Macrosporophycos,Visioidea,Balliopsis,and Psilosiphon,exhibit clustering traits.Furthermore,the multigene sequences provide a robust support for Montagnia that forms a monophyletic group.Ancestral reconstruction of morphological characters identifies nine primitive character states,including whorl,fascicle length,cortical cells,secondary fascicles,the shape of carpogonical branch,spermatangia,carposporophyte,carpogonium and trichogyne,with Visia likely representing ancestral traits in Batrachospermaceae.Furthermore,geographical origin maps suggest a potential common ancestral of Batrachospermaceae origin in the American continent.Additional to conventional analyses,including evolutionary and ancestral reconstruction investigations into key morphological characters,we attempt to reconstruct the biogeography within the Batrachospermaceae,thus contributing to a nuanced understanding of its origin.展开更多
Developing catalysts with excellent stability while significantly reducing the overpotential of the oxygen evolution reaction(OER) is crucial for advancing overall water splitting(OWS) systems.In this study,we synthes...Developing catalysts with excellent stability while significantly reducing the overpotential of the oxygen evolution reaction(OER) is crucial for advancing overall water splitting(OWS) systems.In this study,we synthesized the electrode material Ce-NiCo-LDHs@SnO_(2)/NF through a two-step hydrothermal reaction,where Ce-doped NiCo-LDHs are grown on nickel foam modified by a SnO_(2) layer.Ce doping adjusts the internal electronic distribution of Ni Co-LDHs,while the introduction of the SnO_(2) layer enhances electron transfer capability.Together,these factors contribute to the reduction of the OER energy barrier and experimental evidence confirms that the reaction proceeds via the lattice oxygen evolution mechanism(LOM).Consequently,Ce-NiCo-LDHs@SnO_(2)/NF exhibits high level electrochemical performance in OER,requiring only 234 m V overpotential to achieve a current density of 10 m A/cm^(2),with a Tafel slope of just 27.39 m V/dec.When paired with Pt/C/NF,an external potential of only 1.54 V is needed to drive OWS to attain a current density amounting to 10 m A/cm^(2).Furthermore,the catalyst demonstrates stability for 100 h during the OWS stability test.This study underscores the feasibility of enhancing the OER performance through Ce doping and the introduction of a conductive SnO_(2) layer.展开更多
Developing efficient and durable electrocatalysts for acidic oxygen evolution reaction(OER)is pivotal for advancing proton exchange membrane water electrolysis(PEMWEs),yet balancing activity and stability remains a fo...Developing efficient and durable electrocatalysts for acidic oxygen evolution reaction(OER)is pivotal for advancing proton exchange membrane water electrolysis(PEMWEs),yet balancing activity and stability remains a formidable challenge.Herein,we propose a dual-engineering strategy to stabilize Ru-based catalysts by synergizing the oxygen vacancy site-synergized mechanism-lattice oxygen mechanism(OVSM-LOM)with Ru-N bond stabilization.The engineered RuO_(2)@NCC catalyst exhibits exceptional OER performance in 0.5 M H2SO4,achieving an ultralow overpotential of 215 mV at 10 mA cm^(-2) and prolonged stability for over 327 h.The catalyst delivers 300 h of continuous operation at 1 A cm^(-2),with a negligible degradation rate of only 0.067 mV h-1,further demonstrating its potential for practical application.Oxygen vacancies unlock the OVSM-LOM pathway,bypassing the sluggish adsorbate evolution mechanism(AEM)and accelerating reaction kinetics,while the Ru-N bonds suppress Ru dissolution by anchoring low-valent Ru centers.Quasi-in situ X-ray photoelectron spectroscopy(XPS),X-ray absorption spectroscopy(XAS),and isotopic labeling experiments confirm the lattice oxygen participation with *O formation as the rate-determining step.The Ru-N bonds reinforce the structural integrity by stabilizing low-valent Ru centers and inhibiting overoxidation.Theoretical calculations further verify that the synergistic interaction between OVs and Ru-O(N)active sites optimizes the Ru d-band center and stabilizes intermediates,while Ru-N coordination enhances structural integrity.This study establishes a novel paradigm for designing robust acidic OER catalysts through defect and coordination engineering,bridging the gap between activity and stability for sustainable energy technologies.展开更多
Gibbons are small,arboreal apes that play a critical role in tropical biodiversity and ecosystem ecology.However,nearly all species of gibbons are threatened by habitat loss,illegal trade,hunting,and other human activ...Gibbons are small,arboreal apes that play a critical role in tropical biodiversity and ecosystem ecology.However,nearly all species of gibbons are threatened by habitat loss,illegal trade,hunting,and other human activities.Long-term poor understanding of their genetics and evolution undermines effective conservation efforts.In this study,we analyse comparative population genomic data of four Nomascus species.Our results reveal strong genetic differentiation and gene flow among Nomascus species.Additionally,we identify genomic features that are potentially related to natural selection linked to vocalization,fructose metabolism,motor balance,and body size,consistent with the unique phenotype and adaptability of gibbons.Inbreeding,coupled with population declines due to climate change and historical human activities,leads to reduced genetic diversity and the accumulation of deleterious variations that likely affect cardiovascular disease and the reproductive potential of gibbons and further reduce their fitness,highlighting the urgent need for effective conservation strategies.展开更多
Current quantitative characterization methods for the mechanical response and damage evolution of coal seams at different burial depths under mining-induced stress remains insufficient.To address this,this study estab...Current quantitative characterization methods for the mechanical response and damage evolution of coal seams at different burial depths under mining-induced stress remains insufficient.To address this,this study establishes a quantitative characterization model for the evolution of mechanical properties in gas-bearing coal masses at varying burial depths.It innovatively introduces a dual damage quantification technique and develops a coupled damage evolution model that comprehensively considers energy evolution,effective mining-induced stress,permeability,and a damage sensitivity coefficient,followed by extensive analysis.Key findings include:coal damage exhibits heterogeneous evolutionary characteristics under mining-induced stress;based on the theory of irreversible deformation,the proposed damage characterization equation can effectively determine the critical damage threshold of coal;the three-parameter EXP function model is more suitable for characterizing the time-dependent damage process of coal under mining-induced stress;a new characterization method for the coal brittleness evaluation index is proposed,revealing an 800 m burial depth boundary for the coal brittleness index;at the microscopic level,achieving quantitative characterization of the correlation between peak stress and the average reduction in functional groups during mining-induced failure of coal at different burial depths.Finally,the mapping relationship between laboratory experimental parameters and field monitoring indicators for early warning of coal mine dynamic disasters is established.展开更多
Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular....Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular.However,due to its manufacturing process and thermal nature,internal voids and pores are formed within the thermoplastic materials being fabricated,potentially leading to a decrease in mechanical properties.This paper discussed the effect of printing parameters on the porosity and the mechanical properties of the 3D printed polylactic acid(PLA)through micro-computed tomography(microCT),computational image analysis,and Charpy impact testing.The results for both tests were correlated to investigate the relationship between porosity and Charpy impact strength.PLA samples of 1 cm^(3)×1 cm^(3)×1 cm^(3) were 3D printed at printing temperatures of 180℃,200℃,220℃,and 240℃,and at printing speeds of 50,80,and 110 mm/s,while porosity was measured frommicroCT-reconstructed data.Additionally,impact strength was assessed using a notched Charpy impact tester following ASTMD6610-18.In general,results show that higher printing temperatures and lower printing speeds reduced pore size by improving material flow and fusion,while also increasing impact strength due to better thermal bonding and interlayer adhesion.A maximum 36.8% reduction in mean pore size and a 114% improvement in impact strength were observed at 110 mm/s and 220℃.Conversely,increasing printing speed led to lowerCharpy impact strength.Optimal impact behavior andminimal voids were observed at a printing temperature of 220℃ and a printing speed of 50 mm/s.展开更多
This investigation utilizes non-equilibrium molecular dynamics(NEMD)simulations to explore shockinduced spallation in single-crystal tantalumacross shock velocities of 0.75–4 km/s and initial temperatures from300 to ...This investigation utilizes non-equilibrium molecular dynamics(NEMD)simulations to explore shockinduced spallation in single-crystal tantalumacross shock velocities of 0.75–4 km/s and initial temperatures from300 to 2000 K.Two spallation modes emerge:classical spallation for shock velocity below 1.5 km/s,with solid-state reversible Body-Centered Cubic(BCC)to Face-Centered Cubic(FCC)orHexagonal Close-Packed(HCP)phase transformations and discrete void nucleation-coalescence;micro-spallation for shock velocity above 3.0 km/s,featuring complete shock-induced melting and fragmentation,with a transitional regime(2.0-2.5 km/s)of partial melting.Spall strength decreases monotonically with temperature due to thermal softening.Elevated temperatures delay void nucleation but increase density,expanding spall regions and enhancing structural disorder with reduced BCC recovery.For microspallation,melting exacerbates damage,causing smaller voids and intensified atomic ejection,which increases with temperature.Free surface velocity profiles indicate damage:in classical spallation,first drop marks nucleation,and pullback signals spall layers.In micro-spallation,the first drop is irrelevant,but remains valid.Temperature delays pullback signals and weakens Hugoniot Elastic Limit.This study clarifies temperature-shock coupling in Ta spallation,aiding failure prediction in high-temperature shock environments.展开更多
To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,w...To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,we report a hollow-structured Ni_(x)Co_(1−x)O/Ni_(3)S_(2)/Co_(9)S_(8)heterostructure synthesized via sequential template-assisted growth,thermal oxidation,and controlled sulfidation process.The abundant bimetallic heterointerfaces not only provide additional active sites but also promote electronic modulation via charge redistribution.Additionally,the porous and hollow architecture enhances active surface area and mass transfer ability,thereby increasing the number of accessible active sites for alkaline OER.As a result,the prepared electrocatalyst achieves low overpotential of 310 mV at 10 mA cm^(−2)and small Tafel slope of 55.94 mV dec^(−1),demonstrating the exceptional electrocatalytic performance for alkaline OER.When integrated as the anode in an AEMWE cell,it delivers outstanding performance with only 1.657 V at 1.0 A cm^(−2)and reaches high current density of 5.0 A cm^(−2)at 1.989 V,surpassing those of commercial RuO_(2).The cell also shows excellent long-term durability over 100 h with minimal degradation.This study highlights the strong potential of rationally engineered oxide/sulfide heterostructures for next-generation alkaline water electrolysis.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12072183,12472174,and 12421002).
文摘The recently reported silicon/graphite(Si/Gr)composite electrode with a layered structure is a promising approach to achieve high capacity and stable cycling of Si-based electrodes in lithium-ion batteries.However,there is still a need to clarify why particular layered structures are effective and why others are ineffective or even detrimental.In this work,an unreported mechanism dominated by the porosity evolution of electrodes is proposed for the degradation behavior of layered Si/Gr electrodes.First,the effect of layering sequence on the overall electrode performance is investigated experimentally,and the results suggest that the cycling performance of the silicon-on-graphite(SG)electrode is much superior to that of the graphite-on-silicon electrode.To explain this phenomenon,a coupled mechanical-electrochemical porous electrode model is developed,in which the porosity is affected by the silicon expansion and the local constraints.The modeling results suggest that the weaker constraint of the silicon layer in the SG electrode leads to a more insignificant decrease in porosity,and consequently,the more stable cycling performance.The findings of this work provide new insights into the structural design of Si-based electrodes.
基金Guangdong Basic and Applied Basic Research Foundation(2023B1515120050,2023A1515110529 and 2024A1515012454)Shenzhen Science and Technology Program(JCYJ20230807145759008 and KJZD20240903100206009).
文摘Acetolactate synthase(ALS)-targeting herbicides are among the most widely used weed-control chemicals globally.Mutations in the ALS gene can confer herbicide resistance in crops,thereby allowing selective elimination of weeds without harming crops.Herbicide-resistant ALS alleles were initially discovered in weeds and subsequently developed through artificial mutagenesis techniques.With the advancement of CRISPR/Cas technologies,various genome-editing tools are now available to introduce these resistant alleles,as well as novel variants,into diverse crop species.Moreover,emerging methodologies,such as directed evolution,enable the generation and screening of large populations of random ALS mutants.Consequently,ALS has become one of the most extensively targeted genes in plant gene evolution.This paper provides a comprehensive overview of both conventional and recently developed strategies for ALS evolution,with particular emphasis on CRISPR/Cas-based genome editing and directed evolution.Future perspectives on technological application are also discussed.By advancing our understanding of herbicide-resistant ALS allele development for crop improvement,these methodologies may also pave the way for their application to the evolution of other agronomically important genes.
文摘A composite electrocatalyst,CoMoNiO-S/NF-110(NF is nickel foam),was synthesized through electrodeposition,followed by pyrolysis and then the vulcanization process.CoMoNiO-S/NF-110 exhibited a structure where Ni3S2 and Mo2S3 nanoparticles were integrated at the edges of Co3O4 nanosheets,creating a rich,heterogeneous interface that enhances the synergistic effects of each component.In an alkaline electrolyte,the synthesized CoMoNiO-S/NF-110 exhibited superior electrocatalytic performance for oxygen evolution reaction(OER),achieving current densities of 100 and 200 mA·cm^(-2) with low overpotentials of 199.4 and 224.4 mV,respectively,outperforming RuO2 and several high-performance Mo and Ni-based catalysts.This excellent performance is attributed to the rich interface formed between the components and active sites exposed by the defect structure.
基金National MCF Energy R&D Program of China(2018YFE0306100)Natural Science Foundation of Hunan Province for Distinguished Young Scholars(2021JJ10062)+1 种基金National Natural Science Foundation of China(52101028)China Postdoctoral Science Foundation(2021M703628)。
文摘Combining the phase-field method and the moving boundary method,a three-dimensional phase-field simulation was conducted for the growth and grain evolution of Ti films deposited by physical vapor deposition under different deposition rates and grain orientations.The evolution of grain morphology and grain orientation was also taken into consideration.Simulation results show that at lower deposition rates,the surface of the formed Ti film exhibits a distinct oriented texture structure.The surface roughness of the Ti film is positively correlated with the grain misorientation.Moreover,the surface roughness obtained from the simulation is in good agreement with the experiment results.
文摘The poor electrical conductivity of metal-organic frameworks(MOFs)limits their electrocatalytic performance in the oxygen evolution reaction(OER).In this study,a Py@Co-MOF composite material based on pyrene(Py)molecules and{[Co2(BINDI)(DMA)_(2)]·DMA}_(n)(Co-MOF,H4BINDI=N,N'-bis(5-isophthalic acid)naphthalenediimide,DMA=N,N-dimethylacetamide)was synthesized via a one-pot method,leveragingπ-πinteractions between pyrene and Co-MOF to modulate electrical conductivity.Results demonstrate that the Py@Co-MOF catalyst exhibited significantly enhanced OER performance compared to pure Co-MOF or pyrene-based electrodes,achieving an overpotential of 246 mV at a current density of 10 mA·cm^(-2) along with excellent stability.Density functional theory(DFT)calculations reveal that the formation of O*in the second step is the rate-determining step(RDS)during the OER process on Co-MOF,with an energy barrier of 0.85 eV due to the weak adsorption affinity of the OH*intermediate for Co sites.CCDC:2419276.
文摘A new,cost-effective porous polymer composite was developed by reinforcing polypropylene(PP)with cenosphere particles.This study investigates how the composite’s dielectric properties are affected by their porosity.Dielectric constant(ε′)measurements were taken over a range of frequencies at roomtemperature.A theoreticalmodel was developed to explain the electrical conductivity of the porous PP/cenosphere composites.The study thoroughly examined how the inclusion of cenosphere particles influenced key electrical parameters,including dielectric constant,dissipation factor(tanδ),DC(direct current)conductivity,and AC(alternating current)conductivity.The results revealed that increasing the cenosphere content caused a decrease in the dielectric constant,while the dissipation factor increased.The developed porous PP/cenosphere composite exhibits a unique balance of low dielectric constant,lightweight structure making it suitable for several practical applications.Its low dielectric constant and reduced DC conductivity make it an excellent candidate for electronic packaging,insulating layers,and high-frequency components,where minimal energy loss and signal interference are required.The lightweight nature of the cenosphere-reinforced structure also suggests potential use in aerospace and automotive industries for lightweight insulation panels or structural components.Furthermore,its cost-effectiveness and tunable porosity could enable applications in microwave substrates,radar-absorbing materials,and energy-efficient building materials where dielectric control and weight reduction are critical.Additionally,DC conductivity was found to decline with higher cenosphere concentrations.The theoretical model was in good agreement with the experimental data.
文摘The efficiency and stability of catalysts for photocatalytic hydrogen evolution(PHE)are largely governed by the charge transfer behaviors across the heterojunction interfaces.In this study,CuO,a typical semiconductor featuring a broad spectral absorption range,is successfully employed as the electron acceptor to combine with CdS for constructing a S-scheme heterojunction.The optimized photocatalyst(CdSCuO2∶1)delivers an exceptional hydrogen evolution rate of 18.89 mmol/(g·h),4.15-fold higher compared with bare CdS.X-ray photoelectron spectroscopy(XPS)and ultraviolet-visible diffuse reflection absorption spectroscopy(UV-vis DRS)confirmed the S-scheme band structure of the composites.Moreover,the surface photovoltage(SPV)and electron paramagnetic resonance(EPR)indicated that the photogenerated electrons and photogenerated holes of CdS-CuO2∶1 were respectively transferred to the conduction band(CB)of CdS with a higher reduction potential and the valence band(VB)of CuO with a higher oxidation potential under illumination,as expected for the S-scheme mechanism.Density-functional-theory calculations of the electron density difference(EDD)disclose an interfacial electric field oriented from CdS to CuO.This built-in field suppresses charge recombination and accelerates carrier migration,rationalizing the markedly enhanced PHE activity.This study offers a novel strategy for designing S-scheme heterojunctions with high light harvesting and charge utilization toward sustainable solar-tohydrogen conversion.
基金supported by the National Nature Science Foundation of China under Grant No.11902332。
文摘The augmented evolution equation is established under the framework of the Variation Evolving Method(VEM)that seeks optimal solutions by solving the transformed Initial-Value Problems(IVPs).To improve the numerical performance,its compact form is developed herein.Through replacing the states and costates variation evolution with that of the controls,the dimension-reduced Evolution Partial Differential Equation(EPDE)only solves the control variables along the variation time to get the optimal solution,and the initial conditions for the definite solution may be arbitrary.With this equation,the scale of the resulting IVPs,obtained via the semi-discrete method,is significantly reduced and they may be solved with common Ordinary Differential Equation(ODE)integration methods conveniently.Meanwhile,the state and the costate dynamics share consistent stability in the numerical computation and this avoids the intrinsic numerical difficulty as in the indirect methods.Numerical examples are solved and it is shown that the compact form evolution equation outperforms the primary form in the precision,and the efficiency may be higher for the dense discretization.Actually,it is uncovered that the compact form of the augmented evolution equation is a continuous realization of the Newton type iteration mechanism.
文摘While methodology for determining the mode of evolution in coding sequences has been well established,evaluation of adaptation events in emerging types of phenotype data needs further development.Here,we propose an analysis framework(expression variance decomposition,EVaDe)for comparative single-cell expression data based on phenotypic evolution theory.After decomposing the gene expression variance into separate components,we use two strategies to identify genes exhibiting large between-taxon expression divergence and small within-cell-type expression noise in certain cell types,attributing this pattern to putative adaptive evolution.In a dataset of primate prefrontal cortex,we find that such humanspecific key genes enrich with neurodevelopment-related functions,while most other genes exhibit neutral evolution patterns.Specific neuron types are found to harbor more of these key genes than other cell types,thus likely to have experienced more extensive adaptation.Reassuringly,at the molecular sequence level,the key genes are significantly associated with the rapidly evolving conserved non-coding elements.An additional case analysis comparing the naked mole-rat(NMR)with the mouse suggests that innateimmunity-related genes and cell types have undergone putative expression adaptation in NMR.Overall,the EVaDe framework may effectively probe adaptive evolution mode in single-cell expression data.
基金the National Key Research and Development Program of China(Grant No.2022YFB3404201)the National Natural Science Foundation of China(Grant Nos.52175335,52405342)+1 种基金the Natural Science Foundation Joint Foundation of Liaoning province(Grant No.2023-B SB A-108)the Fundamental Research Funds for the Central Universities(Grant No.N2402005)。
文摘The effects of the high pressure die casting(HPDC)processes on porosity,microstructure,and mechanical properties of heat-treatment-free aluminum silicon(Al-Si)alloys have long been a focal point in automotive die-casting research.In this work,the combined effect of shot sleeve materials and slow shot speeds on porosity,microstructure and mechanical properties of a newly designed HPDC Al-Si alloy was investigated.Results show that employing a ceramic shot sleeve or increasing the slow shot speed significantly reduces both the average size and area fraction of externally solidified crystals(ESCs),as well as the average pore size and volume fraction.When the slow shot speed is increased from 0.05 m·s^(-1)to 0.1 m·s^(-1),the pore volume fraction decreases by 10.2%in steel-shot-sleeve samples,compared to a substantial 67.1%reduction in ceramic-shot-sleeve samples.At a slow shot speed of 0.1 m·s^(-1),castings produced with a ceramic shot sleeve exhibit superior mechanical properties:8.3%higher yield strength,17.4%greater tensile strength,and an 81.4%improvement in elongation,relative to those from a steel shot sleeve.These findings provide valuable insights for minimizing porosity and coarse ESCs in die castings,offering promising potential for broader industrial applications.
基金financially supported by the Hubei Provincial 100-Talent Program 2025National Natural Science Foundation of China(No.42502111)+2 种基金National Postdoctoral Researchers Program(No.GZC20250293)China Postdoctoral Science Foundation(No.2025M770446)Melbourne Research Scholarship(No.396349)。
文摘Chlorite coats are believed to inhibit quartz cementation and preserve deeply-buried sandstone porosity.However,geologists face numerous challenges in evaluating the influences of chlorite coats in real cases.To tackle these challenges,this work reviewed a large number of case studies to discuss the proper way to evaluate their role using petrography.The following five main conclusions were drawn:(1)Compared to other coat parameters,coat coverage is more reliable in evaluating the influence of chlorite coats on quartz cements.(2)In addition to chlorite coats,quartz growth is influenced by multiple factors such as temperature,while sandstone porosity is affected by various factors including mechanical compaction;therefore,when evaluating the influence of chlorite coats,geologists should take these factors into account.(3)Even if no negative correlation exists between chlorite coats and quartz cements,and no positive correlation is observed between chlorite coats and sandstone porosity,one cannot simply conclude that chlorite coats do not inhibit quartz cements and protect sandstone porosity.(4)Chlorite coats can significantly occupy pore space,leading to a net porosity decrease.(5)Chlorite coats can undergo significantly dissolution,while whether this phenomenon is ubiquitous remains underexplored.
基金supported by National Science Foundation of China(10972015,11172015)the Beijing Natural Science Foundation(8162008).
文摘In modern construction,Lightweight Aggregate Concrete(LWAC)has been recognized as a vital material of concern because of its unique properties,such as reduced density and improved thermal insulation.Despite the extensive knowledge regarding its macroscopic properties,there is a wide knowledge gap in understanding the influence of microscale parameters like aggregate porosity and volume ratio on the mechanical response of LWAC.This study aims to bridge this knowledge gap,spurred by the need to enhance the predictability and applicability of LWAC in various construction environments.With the help of advanced numerical methods,including the finite element method and a random circular aggregate model,this study critically evaluates the role played by these microscale factors.We found that an increase in the aggregate porosity from 23.5%to 48.5%leads to a drastic change of weakness from the bonding interface to the aggregate,reducing compressive strength by up to 24.2%and tensile strength by 27.8%.Similarly,the increase in the volume ratio of lightweight aggregate from 25%to 40%leads to a reduction in compressive strength by 13.0%and tensile strength by 9.23%.These results highlight the imperative role of microscale properties on the mechanical properties of LWAC.By supplying precise quantitative details on the effect of porosity and aggregate volume ratio,this research makes significant contributions to construction materials science by providing useful recommendations for the creation and optimization of LWAC with improved performance and sustainability in construction.
基金Supported by the National Natural Science Foundation of China(No.32170204)。
文摘This study presents a comprehensive phylogenetic analysis on Batrachospermaceae based on key taxonomic identifiers(rbcL,psaA,psbA,and COI-5P)from some genera.To systematically explore the phylogenetic relationships and taxonomy within Batrachospermaceae,we integrated molecular and morphological data,and explored the phylogeny,character evolution,and ancestral geographical origin and provided a theoretical support for the classification and geographic origination of Batrachospermaceae.Our findings reveal distinct relationships within the phylogenetic tree.Notably,10 genera(Sirodotia,Batrachospermum,Tuomeya,Volatus,Lympha,Nothocladus,Torularia,Sheathia,Nocturama,and Petrohua)are closely associated in the rbcL phylogenetic tree.Additionally,four genera(Kumanoa,Hoefkenia,Notohesperus,and Virescentia)exhibit high support ratios,indicating their close interrelations.Other genera,including Paludicola,Visia,Acarposporophycos,Macrosporophycos,Visioidea,Balliopsis,and Psilosiphon,exhibit clustering traits.Furthermore,the multigene sequences provide a robust support for Montagnia that forms a monophyletic group.Ancestral reconstruction of morphological characters identifies nine primitive character states,including whorl,fascicle length,cortical cells,secondary fascicles,the shape of carpogonical branch,spermatangia,carposporophyte,carpogonium and trichogyne,with Visia likely representing ancestral traits in Batrachospermaceae.Furthermore,geographical origin maps suggest a potential common ancestral of Batrachospermaceae origin in the American continent.Additional to conventional analyses,including evolutionary and ancestral reconstruction investigations into key morphological characters,we attempt to reconstruct the biogeography within the Batrachospermaceae,thus contributing to a nuanced understanding of its origin.
基金supported by the National Natural Science Foundation of China (No.52274304)。
文摘Developing catalysts with excellent stability while significantly reducing the overpotential of the oxygen evolution reaction(OER) is crucial for advancing overall water splitting(OWS) systems.In this study,we synthesized the electrode material Ce-NiCo-LDHs@SnO_(2)/NF through a two-step hydrothermal reaction,where Ce-doped NiCo-LDHs are grown on nickel foam modified by a SnO_(2) layer.Ce doping adjusts the internal electronic distribution of Ni Co-LDHs,while the introduction of the SnO_(2) layer enhances electron transfer capability.Together,these factors contribute to the reduction of the OER energy barrier and experimental evidence confirms that the reaction proceeds via the lattice oxygen evolution mechanism(LOM).Consequently,Ce-NiCo-LDHs@SnO_(2)/NF exhibits high level electrochemical performance in OER,requiring only 234 m V overpotential to achieve a current density of 10 m A/cm^(2),with a Tafel slope of just 27.39 m V/dec.When paired with Pt/C/NF,an external potential of only 1.54 V is needed to drive OWS to attain a current density amounting to 10 m A/cm^(2).Furthermore,the catalyst demonstrates stability for 100 h during the OWS stability test.This study underscores the feasibility of enhancing the OER performance through Ce doping and the introduction of a conductive SnO_(2) layer.
基金support from the National Natural Science Foundation of China(Nos.12305373 and 52276220)the Guangzhou Basic Research Program(No.SL2024A04J00234).
文摘Developing efficient and durable electrocatalysts for acidic oxygen evolution reaction(OER)is pivotal for advancing proton exchange membrane water electrolysis(PEMWEs),yet balancing activity and stability remains a formidable challenge.Herein,we propose a dual-engineering strategy to stabilize Ru-based catalysts by synergizing the oxygen vacancy site-synergized mechanism-lattice oxygen mechanism(OVSM-LOM)with Ru-N bond stabilization.The engineered RuO_(2)@NCC catalyst exhibits exceptional OER performance in 0.5 M H2SO4,achieving an ultralow overpotential of 215 mV at 10 mA cm^(-2) and prolonged stability for over 327 h.The catalyst delivers 300 h of continuous operation at 1 A cm^(-2),with a negligible degradation rate of only 0.067 mV h-1,further demonstrating its potential for practical application.Oxygen vacancies unlock the OVSM-LOM pathway,bypassing the sluggish adsorbate evolution mechanism(AEM)and accelerating reaction kinetics,while the Ru-N bonds suppress Ru dissolution by anchoring low-valent Ru centers.Quasi-in situ X-ray photoelectron spectroscopy(XPS),X-ray absorption spectroscopy(XAS),and isotopic labeling experiments confirm the lattice oxygen participation with *O formation as the rate-determining step.The Ru-N bonds reinforce the structural integrity by stabilizing low-valent Ru centers and inhibiting overoxidation.Theoretical calculations further verify that the synergistic interaction between OVs and Ru-O(N)active sites optimizes the Ru d-band center and stabilizes intermediates,while Ru-N coordination enhances structural integrity.This study establishes a novel paradigm for designing robust acidic OER catalysts through defect and coordination engineering,bridging the gap between activity and stability for sustainable energy technologies.
基金supported by Science and Technology Program from the Forestry Administration of Guangdong Province(2024KJQT0012)the Guangdong Provincial Key R&D Program(2022B1111040001)+2 种基金the National Forestry Administration rare and endangered species field rescue and breeding project(Gui lin hu yu O10)the National Natural Science Foundation of China(32200337)a fellowship from the China Postdoctoral Science Foundation(2022M712003).
文摘Gibbons are small,arboreal apes that play a critical role in tropical biodiversity and ecosystem ecology.However,nearly all species of gibbons are threatened by habitat loss,illegal trade,hunting,and other human activities.Long-term poor understanding of their genetics and evolution undermines effective conservation efforts.In this study,we analyse comparative population genomic data of four Nomascus species.Our results reveal strong genetic differentiation and gene flow among Nomascus species.Additionally,we identify genomic features that are potentially related to natural selection linked to vocalization,fructose metabolism,motor balance,and body size,consistent with the unique phenotype and adaptability of gibbons.Inbreeding,coupled with population declines due to climate change and historical human activities,leads to reduced genetic diversity and the accumulation of deleterious variations that likely affect cardiovascular disease and the reproductive potential of gibbons and further reduce their fitness,highlighting the urgent need for effective conservation strategies.
文摘Current quantitative characterization methods for the mechanical response and damage evolution of coal seams at different burial depths under mining-induced stress remains insufficient.To address this,this study establishes a quantitative characterization model for the evolution of mechanical properties in gas-bearing coal masses at varying burial depths.It innovatively introduces a dual damage quantification technique and develops a coupled damage evolution model that comprehensively considers energy evolution,effective mining-induced stress,permeability,and a damage sensitivity coefficient,followed by extensive analysis.Key findings include:coal damage exhibits heterogeneous evolutionary characteristics under mining-induced stress;based on the theory of irreversible deformation,the proposed damage characterization equation can effectively determine the critical damage threshold of coal;the three-parameter EXP function model is more suitable for characterizing the time-dependent damage process of coal under mining-induced stress;a new characterization method for the coal brittleness evaluation index is proposed,revealing an 800 m burial depth boundary for the coal brittleness index;at the microscopic level,achieving quantitative characterization of the correlation between peak stress and the average reduction in functional groups during mining-induced failure of coal at different burial depths.Finally,the mapping relationship between laboratory experimental parameters and field monitoring indicators for early warning of coal mine dynamic disasters is established.
文摘Additive Manufacturing,also known as 3D printing,has transformed conventional manufacturing by building objects layer by layer,with material extrusion or fused deposition modeling standing out as particularly popular.However,due to its manufacturing process and thermal nature,internal voids and pores are formed within the thermoplastic materials being fabricated,potentially leading to a decrease in mechanical properties.This paper discussed the effect of printing parameters on the porosity and the mechanical properties of the 3D printed polylactic acid(PLA)through micro-computed tomography(microCT),computational image analysis,and Charpy impact testing.The results for both tests were correlated to investigate the relationship between porosity and Charpy impact strength.PLA samples of 1 cm^(3)×1 cm^(3)×1 cm^(3) were 3D printed at printing temperatures of 180℃,200℃,220℃,and 240℃,and at printing speeds of 50,80,and 110 mm/s,while porosity was measured frommicroCT-reconstructed data.Additionally,impact strength was assessed using a notched Charpy impact tester following ASTMD6610-18.In general,results show that higher printing temperatures and lower printing speeds reduced pore size by improving material flow and fusion,while also increasing impact strength due to better thermal bonding and interlayer adhesion.A maximum 36.8% reduction in mean pore size and a 114% improvement in impact strength were observed at 110 mm/s and 220℃.Conversely,increasing printing speed led to lowerCharpy impact strength.Optimal impact behavior andminimal voids were observed at a printing temperature of 220℃ and a printing speed of 50 mm/s.
基金funded by the Changsha Municipal Natural Science Foundation(Grant No.kq2402024)Chengdu Polytechnic Scientific Research Platform(23KYPT01).
文摘This investigation utilizes non-equilibrium molecular dynamics(NEMD)simulations to explore shockinduced spallation in single-crystal tantalumacross shock velocities of 0.75–4 km/s and initial temperatures from300 to 2000 K.Two spallation modes emerge:classical spallation for shock velocity below 1.5 km/s,with solid-state reversible Body-Centered Cubic(BCC)to Face-Centered Cubic(FCC)orHexagonal Close-Packed(HCP)phase transformations and discrete void nucleation-coalescence;micro-spallation for shock velocity above 3.0 km/s,featuring complete shock-induced melting and fragmentation,with a transitional regime(2.0-2.5 km/s)of partial melting.Spall strength decreases monotonically with temperature due to thermal softening.Elevated temperatures delay void nucleation but increase density,expanding spall regions and enhancing structural disorder with reduced BCC recovery.For microspallation,melting exacerbates damage,causing smaller voids and intensified atomic ejection,which increases with temperature.Free surface velocity profiles indicate damage:in classical spallation,first drop marks nucleation,and pullback signals spall layers.In micro-spallation,the first drop is irrelevant,but remains valid.Temperature delays pullback signals and weakens Hugoniot Elastic Limit.This study clarifies temperature-shock coupling in Ta spallation,aiding failure prediction in high-temperature shock environments.
基金supported by the Korea Institute for Advancement of Technology (KIAT)the Ministry of Trade,Industry&Energy (MOTIE) of the Republic of Korea (No. P0022130)by the Institute of Information&Communications Technology Planning&Evaluation(IITP)-Innovative Human Resource Development for Local Intellectualization program grant funded by the Korea government (MSIT)(IITP-2025-RS-2023-00259678)
文摘To realize the practical application of anion exchange membrane water electrolysis(AEMWE),it is essential to develop highly active,durable,and cost-effective electrocatalyst for oxygen evolution reaction(OER).Herein,we report a hollow-structured Ni_(x)Co_(1−x)O/Ni_(3)S_(2)/Co_(9)S_(8)heterostructure synthesized via sequential template-assisted growth,thermal oxidation,and controlled sulfidation process.The abundant bimetallic heterointerfaces not only provide additional active sites but also promote electronic modulation via charge redistribution.Additionally,the porous and hollow architecture enhances active surface area and mass transfer ability,thereby increasing the number of accessible active sites for alkaline OER.As a result,the prepared electrocatalyst achieves low overpotential of 310 mV at 10 mA cm^(−2)and small Tafel slope of 55.94 mV dec^(−1),demonstrating the exceptional electrocatalytic performance for alkaline OER.When integrated as the anode in an AEMWE cell,it delivers outstanding performance with only 1.657 V at 1.0 A cm^(−2)and reaches high current density of 5.0 A cm^(−2)at 1.989 V,surpassing those of commercial RuO_(2).The cell also shows excellent long-term durability over 100 h with minimal degradation.This study highlights the strong potential of rationally engineered oxide/sulfide heterostructures for next-generation alkaline water electrolysis.
