Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the ...Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the effects of different additives on mullite formation,as well as the microstructure and properties of the ceramic thin plates.Additionally,the study explored the toughening and strengthening mechanisms induced by the additives,providing a theoretical foundation for further optimizing the toughness of ceramic thin plates.The results showed that the D4 sample fired at 1220℃(with an addition of 20 wt% α-Al_(2)O_(3))exhibited the best performance,with a water absorption rate of 0.07%,apparent porosity of 0.18%,bulk density of 2.75 g·cm^(-3),firing shrinkage of 12.76%,bending strength reaching 101.93 MPa,and fracture toughness of 2.51 MPa·m^(1/2).As the amount ofα-Al_(2)O_(3) additive increased,the ceramic thin plates exhibited a greater abundance of short rod-like mullite and corundum grains,which were tightly packed together,forming a framework for the ceramic thin plates.This microstructure enhanced pathways for crack propagation,dispersed internal stresses,and increased fracture surface energy,resulting in significant improvements in both strength and fracture toughness of the ceramic thin plates.展开更多
This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A...This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A key objective is to develop a computationally efficient finite element framework capable of accurately capturing the complex behavior of 3D-FGSW plates.The studied configuration features a two-dimensional functionally graded material(2D-FGM)core between two threedimensional functionally graded material(3D-FGM)face layers.Nonlinear geometric effects,including mid-plane stretching,are modeled using von K arm an-type assumptions,and the governing equations are formulated via Hamilton's principle within an improved first-order shear deformation theory(iFSDT).The accuracy and computational efficiency of the proposed method are validated through comparison with existing benchmark solutions.Subsequently,a comprehensive parametric study is carried out to examine the effects of geometric dimensions,material properties,foundation sizes,and boundary conditions(BCs)on the nonlinear vibration of 3D-FGSW plates.The findings of this work are expected to provide valuable insights for the design and manufacturing of advanced sandwich structures subjected to BL.展开更多
A 32-channel charge-sensitive amplifier(CSA)is designed for fast timing in the delay-line readout of a parallel plate avalanche counter(PPAC)array.It is realized on a PCB with operational amplifiers and other discrete...A 32-channel charge-sensitive amplifier(CSA)is designed for fast timing in the delay-line readout of a parallel plate avalanche counter(PPAC)array.It is realized on a PCB with operational amplifiers and other discrete components.Each channel consists of an integrator,a pole-zero cancellation net,and a linear amplification stage,which can be adapted to accommodate either positive or negative input signals.The RMS equivalent input noise charges are 3.3 fC,the conversion gains are approximately±2 mV∕fC,and the intrinsic time resolution reaches 32 ps.In the prototype PPAC application,the CSA performs as well as the commercial FTA820A amplifier,providing a position resolution as good as 0.17 mm,and exhibiting reliable stability during several hours of continuous data acquisition.展开更多
A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The resu...A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.展开更多
In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regiona...In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
High-Mg andesites(HMAs)typically originate in subduction-related tectonic settings,including active continental margins and island arcs,and studies of HMAs can constrain the tectonic evolution of the South China Block...High-Mg andesites(HMAs)typically originate in subduction-related tectonic settings,including active continental margins and island arcs,and studies of HMAs can constrain the tectonic evolution of the South China Block and Paleo-Tethyan Ocean.This paper presents new chronological and geochemical data for high-Mg gabbroic diorites in the Funing area,southern South China.The gabbroic diorites yield ages of 254-249 Ma,and have moderate SiO2 contents(51.3%-57.8%),high MgO contents(4.6%-10.2%)and Mg^(#)values(52-75),enrichment in large-ion lithophile elements and light rare earth elements,and depletion in high-field-strength elements-collectively displaying geochemical signatures typical of sanukites.The gabbroic diorites have radiogenic initial Sr and Pb isotopic compositions,and negativeεNd(t)andεHf(t)values.These characteristics distinguish the Funing gabbroic diorites from subduction-related igneous rocks in the Paleo-Pacific tectonic domain.Instead,they are isotopically similar to HMAs and basalts along the Paleo-Tethys suture.We propose the high-Mg gabbroic diorites and basaltic andesites in Funing area share a common mantle source,linked to subduction and rollback of the Paleo-Tethyan plate beneath the South China Block,which triggered back-arc rifting and partial melting of the metasomatized lithospheric mantle during the Late Permian to Early Triassic.展开更多
We investigate the effects of projectile material on high-speed penetration/perforation of Inconel 718 alloy(IN718)plates.High-speed ballistic impact tests are conducted on 2 mm-thickness IN718 plates with 5-mm-diamet...We investigate the effects of projectile material on high-speed penetration/perforation of Inconel 718 alloy(IN718)plates.High-speed ballistic impact tests are conducted on 2 mm-thickness IN718 plates with 5-mm-diameter stainless steel 304(SS304),Ti alloy TC4,and Al alloy AA1060 spherical projectiles.The impact processes are captured with high-speed photography.Optical and scanning electron microscopy and laser scan are conducted on recovered projectiles and targets.Finite element models of the ballistic impact are established based on the coupled Eulerian-Lagrangian algorithm with the Johnson-Cook constitutive model and failure criterion,and can well reproduce the experimental results.The experimental and simulated data related to projectile dynamics,and the geometries of postmortem projectiles and bullet holes are analyzed with phenomenological models.Projectile velocity evolution can be described with hydrodynamic models of penetration.Dimensional analysis reveals a universal relationship between the bullet hole expansion coefficient and the normalized dynamic pressure,regardless of the projectile material.However,the projectile material does affect projectile deformation,bullet hole size,and energy absorption of target.展开更多
In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-f...In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.展开更多
A high-order hybrid numerical framework is developed by coupling a three-stage exponential time integrator with a Runge–Kutta scheme for the efficient solution of partial differential equations involving first-order ...A high-order hybrid numerical framework is developed by coupling a three-stage exponential time integrator with a Runge–Kutta scheme for the efficient solution of partial differential equations involving first-order time derivatives.The proposed scheme attains third-order temporal accuracy and is rigorously validated through stability and convergence analyses for both scalar and coupled systems.Its effectiveness is demonstrated by simulating unsteady Eyring-Prandtl non-Newtonian nanofluid flow over a Riga plate with coupled heat and mass transfer under electromagnetic actuation.The physical model accounts for Brownian motion and thermophoresis,and the nanofluid considered is a Prandtl-type non-Newtonian base fluid containing suspended nanoparticles,with heat and mass transport governed by coupled momentum,energy,and concentration equations.Numerical simulations are performed over practically relevant parameter ranges,with the Reynolds number fixed at Re=5 and the Prandtl number set to Pr=3 to represent moderate inertial and thermal diffusion effects typical of nanofluid transport systems.To enhance computational efficiency,an artificial neural network(ANN)-based surrogate model is developed to predict the skin friction coefficient and local Sherwood number as functions of Reynolds number,Prandtl number,Schmidt number,Brownian motion,and thermophoresis parameters.The training dataset is generated entirely from high-fidelity numerical simulations produced by the proposed hybrid scheme.The data are systematically partitioned into 70%for training,15%for validation,and 15%for testing,ensuring reliable generalization.Regression analysis yields a near-unity correlation coefficient(R≈0.99),while error histograms exhibit tightly clustered residuals around zero,confirming high predictive accuracy.Furthermore,a benchmark convergence study using Stokes’first problem demonstrates that the proposed scheme consistently achieves lower global error norms than the classical Runge–Kutta method for identical spatial and temporal resolutions.Overall,this study introduces a novel computational intelligence framework that integrates high-order numerical solvers with machine learning,offering a robust and time-efficient tool for advanced modeling and real-time prediction of non-Newtonian nanofluid transport phenomena under electromagnetic flow control.展开更多
With the continuous increase in performance requirements for power systems in the aerospace and low-altitude economy sectors,designing lightweight and highstrength blade structures with excellent dynamic characteristi...With the continuous increase in performance requirements for power systems in the aerospace and low-altitude economy sectors,designing lightweight and highstrength blade structures with excellent dynamic characteristics has become critical.This paper puts forward a dynamic model for a rotating functionally graded graphenereinforced(FG-GPR)sandwich metal porous cantilever pre-twisted plate(PTP),aiming to analyze its natural vibration characteristics.To this end,the mixture principle and the revised Halpin-Tsai model are used to determine the parameters of graphene and porosity distributions in the core layer.With the classical plate theory,the Rayleigh-Ritz method,and the polynomials,the dynamic equations are derived to solve for the free vibration mode shapes and frequencies of the rotating FG-GPR sandwich metal porous cantilever PTP.The comparison of natural frequencies and mode shapes with available literature results confirms the precision of the theoretical formulation and numerical computations.The bending stiffnesses are analyzed.Finally,the effects of different graphene/pore distributions,length-to-thickness/width ratios,layer thickness ratios,twist angles,and rotational speeds on the natural frequencies of the system are systematically investigated.展开更多
Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding str...Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.展开更多
On January 7,2025,01:05:15 UTC(9:05 a.m.local time)southern Tibet was rocked by a M_(W)7.1 earthquake(M_(W)=moment magnitude,USGS)centered(28.639°N 87.361°E)in the Lhasa Block north of the India/Eurasia Plat...On January 7,2025,01:05:15 UTC(9:05 a.m.local time)southern Tibet was rocked by a M_(W)7.1 earthquake(M_(W)=moment magnitude,USGS)centered(28.639°N 87.361°E)in the Lhasa Block north of the India/Eurasia Plate boundary,in a remote area about 180 km SW of Xigaze,in Dingri County of Shigatse of the Xizang Autonomous Region(Figure 1).展开更多
On February 8,2025,a remote area in the Caribbean Sea was rocked by a large M_(W)7.6(USGS,2025) earthquake,centered 209 km SSW of Georgetown,the capital of the Cayman Islands,and the largest city(population~41 000) of...On February 8,2025,a remote area in the Caribbean Sea was rocked by a large M_(W)7.6(USGS,2025) earthquake,centered 209 km SSW of Georgetown,the capital of the Cayman Islands,and the largest city(population~41 000) of the British Overseas Territories(Figure 1).The earthquake was significant due to its large magnitude,potential regional impact,and the possibility of generating a tsunami.展开更多
As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A s...As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A synergistic optimization structure of“inlet plate-channel spoiler columns”is proposed for the local hot spot problem during the operation of Insulated Gate Bipolar Transistor(IGBT),combined with the inherent defect of uneven flow distribution of the traditional U-type liquid cooling plate in this paper.The influences of the shape,height(H),and spacing from the spoiler column(b)of the plate on the comprehensive heat dissipation performance of the liquid cooling plate are analyzed at different Reynolds numbers,A dual heat source strategy is introduced and the effect of the optimized structure is evaluated by the temperature inhomogeneity coefficient(Φ).The results show that the optimum effect is achieved when the shape of the plate is square,H=4.5 mm,b=2 mm,and u=0.05 m/s,at which the HTPE=1.09 and Φ are reduced by 40%.In contrast,the maximum temperatures of the IGBT and the FWD(Free Wheeling Diode)chips are reduced by 8.7 and 8.4 K,respectively,and ΔP rises by only 1.58 Pa while keeping ΔT not significantly increased.This optimized configuration achieves a significant reduction in the critical chip temperature and optimization of the flow field uniformity with almost no change in the system flow resistance.It breaks through the limitation of single structure optimization of the traditional liquid cooling plate and effectively solves the problem of uneven flow in the U-shaped cooling plate,which provides a new solution with important engineering value for the thermal management of IGBT modules.展开更多
Since the initial observation of carbon nanotubes(CNTs)and graphene platelets(GPLs)in the 1990 and 2000s,the demand for high-performance structural applications and multifunctional materials has driven significant int...Since the initial observation of carbon nanotubes(CNTs)and graphene platelets(GPLs)in the 1990 and 2000s,the demand for high-performance structural applications and multifunctional materials has driven significant interest in composite structures reinforced with GPLs and CNTs.Incorporating these nanofillers into matrix materials markedly enhances the mechanical properties of the structures.To further improve efficiency and functionality,func-tionally graded(FG)distributions of CNTs and GPLs have been proposed.This study presents an extensive review of computational approaches developed to predict the global behavior of composite structural components enhanced with CNT and GPL nanofillers.The analysis focuses on key structural elements,such as plate-type configurations,cylindrical and curved shells,and beams,emphasizing the computational techniques utilized to simulate their mechanical behavior.The utilization of three-dimensional elasticity theories and equivalent single-layer(ESL)frameworks,which are widely employed in the modeling and analysis of these composites,is comprehensively discussed.Additionally,the paper examines various mechanical performance aspects,including static,buckling,post-buckling,vibrational,and dynamic responses for the mentioned structures.The unique features of hybrid nanocomposites,combining CNTs and GPLs,are also analyzed.Furthermore,the study delves into the fabrication and processing techniques of these materials,with a particular focus on strategies to mitigate nanofiller agglomeration.The review extends to cover thermal and electrical properties,durability under environmental exposure,fatigue resistance,and vibration-damping characteristics.In conclusion,the paper underscores the necessity for ongoing advancements in computational modeling to facilitate improved design,analysis,and optimization of nanocomposite structures.Future research opportunities in this rapidly advancing domain are also outlined.展开更多
Throughout the 20th century, several large megathrust earthquakes were observed in the Colombia–Ecuador subduction zone which widely ruptured plate interfaces, causing considerable damage and loss of life. The occurr...Throughout the 20th century, several large megathrust earthquakes were observed in the Colombia–Ecuador subduction zone which widely ruptured plate interfaces, causing considerable damage and loss of life. The occurrence of earthquakes in subduction zones is thought to be closely related to the thermal structure of the incoming plate. However, in the case of the subducting Nazca Plate beneath the Colombia–Ecuador zone, the thermal structure remains unclear, especially its hydraulic distribution. On the basis of 3D thermal models, we present new insights into the plate interface conditions of Colombia–Ecuador interplate and megathrust earthquakes. We show that the plate geometry strongly affects the along-strike thermal structure of the slab beneath Colombia and Ecuador, with the subduction of the Carnegie Ridge playing an important role. Our results further reveal that the unique geometry of the Nazca Plate is the primary reason for the relatively high temperatures of the slab beneath Colombia. We suggest that the positions of the100–200 ℃ and 350–450 ℃ isotherms on the plate interface determine the updip and downdip limits of the seismogenic zone. For Colombia–Ecuador interplate earthquakes, the released fluids control the distribution of shallow-depth earthquakes, whereas the age and geometry of the slab control the distribution of intermediate-depth earthquakes. The average temperature of the plate interface at the upper limit of large megathrust earthquakes is hotter than previously thought, which is more consistent with our understanding of the Colombia–Ecuador subduction zone. We predict that the potential location of future large seismic events could be in the rupture zone of past seismic events or offshore of northern Colombia.展开更多
Intraplate deformation, influenced by tectonic, geological, and environmental factors, presents significant challenges for geodesy and geodynamics. This study focuses on quantifying intraplate deformation within the N...Intraplate deformation, influenced by tectonic, geological, and environmental factors, presents significant challenges for geodesy and geodynamics. This study focuses on quantifying intraplate deformation within the Nubian Plate using residual velocity fields derived from two GPS-based velocity models,MIDAS and HECTOR, referenced to the ITRF2014 frame. This research analyzes 20 years of daily GPS coordinate time series(2000-2021) from 25 continuously operating stations across West Africa, offering a detailed regional perspective. The primary objectives include generating outlier-free coordinate time series from station daily geocentric coordinate data, evaluating noise characteristics using spectral analysis to assess station stability, and modeling horizontal and vertical deformation patterns using residual velocity analysis. An examination of the noise patterns in the GPS coordinate time series data revealed flicker noise to be the dominant type, confirming the fairly stability of GPS stations for precise geodetic measurements. Horizontal deformation rates were found to range from 0 to 2.0 mm/yr, while vertical rates varied between-1.3 and 3.0 mm/yr, indicating localized subsidence and uplift influenced by tectonics, sediment loading, and groundwater extraction. Both MIDAS and HECTOR models captured consistent deformation patterns with an average deformation rate of 0.8 mm/yr in all coordinate components but revealed marginal regional discrepancies, reflecting differences in velocity modeling approaches. Residual velocity statistics indicate greater variability in horizontal deformation with a standard deviation of 1.6 mm/yr compared to vertical deformation with a standard deviation of 0.9 mm/yr. The larger horizontal standard deviations, 1.7 times greater than the vertical, may be due to the simultaneous use of ITRF-and GPS-based velocities to estimate the residual velocities, unlike the vertical component, which relies solely on GPS data. This study highlights the importance of integrating localized deformation data into geodetic infrastructure designs, advocating for GPS upgrades and advanced processing to improve measurement precision, enhance hazard assessments, and support resilient infrastructure development in West Africa.展开更多
The Pamir Plateau is situated at the northwestern edge of the India-Eurasia Plate collision zone,making it a key region for studying continental collision and plateau uplift.The deep structure and dynamic processes of...The Pamir Plateau is situated at the northwestern edge of the India-Eurasia Plate collision zone,making it a key region for studying continental collision and plateau uplift.The deep structure and dynamic processes of this region have long been of great scientific interest.This paper synthesizes recent advancements in the application of geophysical techniques to investigate the deep structure of the Pamir Plateau.The study focuses on the heterogeneity of the crust and lithosphere,the morphology of the Moho and the double Moho structure,the depth variations of the lithosphere-asthenosphere boundary(LAB),and the complex features of the mantle transition zone(MTZ).The results indicate that the deep tectonic structure of the Pamir region is closely associated with subduction of the Indian Plate,the southward compression of the Asian lithosphere,and lateral tectonic interactions from the Tarim Basin,which jointly drive the region’s uplift and deformation.The paper further examines the deep interactions between the Pamir Plateau and adjacent regions.Additionally,the study discuss key controversies in current research,such as the spatial relationship between the Moho and deep seismic zones,the mechanisms of lithosphere delamination,and its effects on shallow structural deformation,etc.展开更多
In southern Asia,there are three large-scale wave-like mountains ranging from the Tibetan Plateau westward to the Iranian Plateau and the Armenian Plateau.On the southern side between plateaus,there are the Indian Pen...In southern Asia,there are three large-scale wave-like mountains ranging from the Tibetan Plateau westward to the Iranian Plateau and the Armenian Plateau.On the southern side between plateaus,there are the Indian Peninsula and the Arabian Peninsula.What dynamic mechanisms form the directional alignment of the three plateaus with the two peninsulas remains a mystery.In the early stages of the Earth’s geological evolution,the internal structure of the Earth was that the center was a solid core,and the outmost layer was a thin equatorial crust zone separated by two thick pristine continents in polar areas,while the middle part was a deep magma fluid layer.Within the magma fluid layer,thermal and dynamic differences triggered planetary-scale vertical magma cells and led to the core-magma angular momentum exchange.When the core loses angular momentum and the magma layer gains angular momentum,the movement of upper magma fluids to the east and the tropical convergence zone(TCZ)drives the split and drift of two thick pristine continents,eventually forming the current combination of these plateaus and peninsulas and their wave-like arrangement along the east-west direction.Among them,the horizontal orthogonal convergence(collision)of upper magma fluids from the two hemispheres excited the vertical shear stress along the magma TCZ,which is the dynamic mechanism of mountain uplifts on the north side and plate subductions on the south side.To confirm this mechanism,two examples of low-level winds are used to calculate the correspondence between cyclone/anticyclonic systems generated by the orthogonal collision of airflows along the atmospheric TCZ and satellite-observed cloud systems.Such comparison can help us revisit the geological history of continental drift and orogeny.展开更多
基金Funded by the National Key Technology Research and Development Program of the Ministry of Science and Technology of China(No.2023YFB4204302)。
文摘Ceramic thin plates were prepared using kaolin,potassium sodium feldspar and quartz powder as the main raw materials and kaolin,α-Al_(2)O_(3),MoO_(3) and AlF_(3)·3H_(2)O as additives.The experiment examined the effects of different additives on mullite formation,as well as the microstructure and properties of the ceramic thin plates.Additionally,the study explored the toughening and strengthening mechanisms induced by the additives,providing a theoretical foundation for further optimizing the toughness of ceramic thin plates.The results showed that the D4 sample fired at 1220℃(with an addition of 20 wt% α-Al_(2)O_(3))exhibited the best performance,with a water absorption rate of 0.07%,apparent porosity of 0.18%,bulk density of 2.75 g·cm^(-3),firing shrinkage of 12.76%,bending strength reaching 101.93 MPa,and fracture toughness of 2.51 MPa·m^(1/2).As the amount ofα-Al_(2)O_(3) additive increased,the ceramic thin plates exhibited a greater abundance of short rod-like mullite and corundum grains,which were tightly packed together,forming a framework for the ceramic thin plates.This microstructure enhanced pathways for crack propagation,dispersed internal stresses,and increased fracture surface energy,resulting in significant improvements in both strength and fracture toughness of the ceramic thin plates.
文摘This paper aims to explore and quantify the nonlinear vibration response of tri-directional functionally graded sandwich(3D-FGSW)plates partially supported by a Pasternak foundation(PF)subjected to blast loading(BL).A key objective is to develop a computationally efficient finite element framework capable of accurately capturing the complex behavior of 3D-FGSW plates.The studied configuration features a two-dimensional functionally graded material(2D-FGM)core between two threedimensional functionally graded material(3D-FGM)face layers.Nonlinear geometric effects,including mid-plane stretching,are modeled using von K arm an-type assumptions,and the governing equations are formulated via Hamilton's principle within an improved first-order shear deformation theory(iFSDT).The accuracy and computational efficiency of the proposed method are validated through comparison with existing benchmark solutions.Subsequently,a comprehensive parametric study is carried out to examine the effects of geometric dimensions,material properties,foundation sizes,and boundary conditions(BCs)on the nonlinear vibration of 3D-FGSW plates.The findings of this work are expected to provide valuable insights for the design and manufacturing of advanced sandwich structures subjected to BL.
基金supported by the National Natural Science Foundation of China(Nos.U2167202,12225504,12005276)the Natural Science Foundation of Shandong Province(No.ZR2024QA172)the Fundamental Research Funds of Shandong University.
文摘A 32-channel charge-sensitive amplifier(CSA)is designed for fast timing in the delay-line readout of a parallel plate avalanche counter(PPAC)array.It is realized on a PCB with operational amplifiers and other discrete components.Each channel consists of an integrator,a pole-zero cancellation net,and a linear amplification stage,which can be adapted to accommodate either positive or negative input signals.The RMS equivalent input noise charges are 3.3 fC,the conversion gains are approximately±2 mV∕fC,and the intrinsic time resolution reaches 32 ps.In the prototype PPAC application,the CSA performs as well as the commercial FTA820A amplifier,providing a position resolution as good as 0.17 mm,and exhibiting reliable stability during several hours of continuous data acquisition.
基金supported by Guangdong Major Project of Basic and Applied Basic Research, China (No. 2020B0301030006)Fundamental Research Funds for the Central Universities, China (No. SWU-XDJH202313)+1 种基金Chongqing Postdoctoral Science Foundation Funded Project, China (No. 2112012728014435)the Chongqing Postgraduate Research and Innovation Project, China (No. CYS23197)。
文摘A new method was proposed for preparing AZ31/1060 composite plates with a corrugated interface,which involved cold-pressing a corrugated surface on the Al plate and then hot-pressing the assembled Mg/Al plate.The results show that cold-pressing produces intense plastic deformation near the corrugated surface of the Al plate,which promotes dynamic recrystallization of the Al substrate near the interface during the subsequent hot-pressing.In addition,the initial corrugation on the surface of the Al plate also changes the local stress state near the interface during hot pressing,which has a large effect on the texture components of the substrates near the corrugated interface.The construction of the corrugated interface can greatly enhance the shear strength by 2−4 times due to the increased contact area and the strong“mechanical gearing”effect.Moreover,the mechanical properties are largely depended on the orientation relationship between corrugated direction and loading direction.
文摘In this paper,we define for the trace operator,the solution of certain models of vibrating plates standards with initial data in a strategic region spaces of weak regularities.Indeed,we know that the notion of regional controllability is more adapted to systems described by dynamic systems.Regional controllability results in a strategic area were established for vibrating plates by the Hilbertian Uniqueness Method.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金supported by the National Natural Science Foundation of China (42473063)Guike AD24010023, the Seventh Guangxi Zhuang Autonomous Region Bagui Scholars Program (to LIU Xijun)the Guangxi Natural Science Foundations of China (2025GXNSFBA069054)
文摘High-Mg andesites(HMAs)typically originate in subduction-related tectonic settings,including active continental margins and island arcs,and studies of HMAs can constrain the tectonic evolution of the South China Block and Paleo-Tethyan Ocean.This paper presents new chronological and geochemical data for high-Mg gabbroic diorites in the Funing area,southern South China.The gabbroic diorites yield ages of 254-249 Ma,and have moderate SiO2 contents(51.3%-57.8%),high MgO contents(4.6%-10.2%)and Mg^(#)values(52-75),enrichment in large-ion lithophile elements and light rare earth elements,and depletion in high-field-strength elements-collectively displaying geochemical signatures typical of sanukites.The gabbroic diorites have radiogenic initial Sr and Pb isotopic compositions,and negativeεNd(t)andεHf(t)values.These characteristics distinguish the Funing gabbroic diorites from subduction-related igneous rocks in the Paleo-Pacific tectonic domain.Instead,they are isotopically similar to HMAs and basalts along the Paleo-Tethys suture.We propose the high-Mg gabbroic diorites and basaltic andesites in Funing area share a common mantle source,linked to subduction and rollback of the Paleo-Tethyan plate beneath the South China Block,which triggered back-arc rifting and partial melting of the metasomatized lithospheric mantle during the Late Permian to Early Triassic.
基金supported by National Natural Science Foundation of China(No.12402465)Sichuan Science and Technology Program(No.2023NSFSC1284)。
文摘We investigate the effects of projectile material on high-speed penetration/perforation of Inconel 718 alloy(IN718)plates.High-speed ballistic impact tests are conducted on 2 mm-thickness IN718 plates with 5-mm-diameter stainless steel 304(SS304),Ti alloy TC4,and Al alloy AA1060 spherical projectiles.The impact processes are captured with high-speed photography.Optical and scanning electron microscopy and laser scan are conducted on recovered projectiles and targets.Finite element models of the ballistic impact are established based on the coupled Eulerian-Lagrangian algorithm with the Johnson-Cook constitutive model and failure criterion,and can well reproduce the experimental results.The experimental and simulated data related to projectile dynamics,and the geometries of postmortem projectiles and bullet holes are analyzed with phenomenological models.Projectile velocity evolution can be described with hydrodynamic models of penetration.Dimensional analysis reveals a universal relationship between the bullet hole expansion coefficient and the normalized dynamic pressure,regardless of the projectile material.However,the projectile material does affect projectile deformation,bullet hole size,and energy absorption of target.
基金supported by the National Natural Science Foundation of China(Grant Nos.52271307,52061135107,52192692,11802025)the Liao Ning Excellent Youth Fund Program(Grant No.2023JH3/10200012)+1 种基金the Liao Ning Revitalization Tal-ents Program(Grant No.XLYC1908027)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20RC(3)025,DUT20TD108,DUT20LAB308)。
文摘In order to investigate the penetration performance of Linear-Shaped Charge(LSC),Embowed LinearShaped Charge(ELSC),and Embowed Linear Explosively Formed Projectile(ELEFP)on T-shaped stiffened plates,a series of near-field air-burst experiments are conducted.The damage modes and characteristics of the target plates are compared and analyzed.Each flat plate section is completely punctured,resulting in a penetration hole.The damage modes induced by the three charge types on the stiffened plate structure are consistent,characterized by shear failure in the central region of the flat plate due to penetration by the penetrator,localized plastic deformation of the flat plate,and local penetration failure resulting from partial perforation of the central stiffener.The penetration lengths caused by ELSC and ELEFP are 45.1%and 46.1% larger than that of LSC,while the half-width of the penetration hole generated by ELEFP is 54.2% and 24.7% smaller than that of ELSC and LSC,respectively.The penetration height caused by ELEFP are 17.5%and 62.1% larger than that of ELSC and LSC,respectively.The stiffener effectively segments the damage area,enhancing the local structural strength and limiting the extent of plastic deformation in the flat plate section.The comparative results show that the ELSC proves to be more effective for efficient large-scale damage,and ELEFP is more suitable for achieving efficient localized damage.
基金supported and funded by the Deanship of Scientific Research at Imam Mohammad Ibn Saud Islamic University(IMSIU)(grant number IMSIU-DDRSP2603).
文摘A high-order hybrid numerical framework is developed by coupling a three-stage exponential time integrator with a Runge–Kutta scheme for the efficient solution of partial differential equations involving first-order time derivatives.The proposed scheme attains third-order temporal accuracy and is rigorously validated through stability and convergence analyses for both scalar and coupled systems.Its effectiveness is demonstrated by simulating unsteady Eyring-Prandtl non-Newtonian nanofluid flow over a Riga plate with coupled heat and mass transfer under electromagnetic actuation.The physical model accounts for Brownian motion and thermophoresis,and the nanofluid considered is a Prandtl-type non-Newtonian base fluid containing suspended nanoparticles,with heat and mass transport governed by coupled momentum,energy,and concentration equations.Numerical simulations are performed over practically relevant parameter ranges,with the Reynolds number fixed at Re=5 and the Prandtl number set to Pr=3 to represent moderate inertial and thermal diffusion effects typical of nanofluid transport systems.To enhance computational efficiency,an artificial neural network(ANN)-based surrogate model is developed to predict the skin friction coefficient and local Sherwood number as functions of Reynolds number,Prandtl number,Schmidt number,Brownian motion,and thermophoresis parameters.The training dataset is generated entirely from high-fidelity numerical simulations produced by the proposed hybrid scheme.The data are systematically partitioned into 70%for training,15%for validation,and 15%for testing,ensuring reliable generalization.Regression analysis yields a near-unity correlation coefficient(R≈0.99),while error histograms exhibit tightly clustered residuals around zero,confirming high predictive accuracy.Furthermore,a benchmark convergence study using Stokes’first problem demonstrates that the proposed scheme consistently achieves lower global error norms than the classical Runge–Kutta method for identical spatial and temporal resolutions.Overall,this study introduces a novel computational intelligence framework that integrates high-order numerical solvers with machine learning,offering a robust and time-efficient tool for advanced modeling and real-time prediction of non-Newtonian nanofluid transport phenomena under electromagnetic flow control.
基金Project supported by the National Natural Science Foundation of China(Nos.12272056 and 11832002)。
文摘With the continuous increase in performance requirements for power systems in the aerospace and low-altitude economy sectors,designing lightweight and highstrength blade structures with excellent dynamic characteristics has become critical.This paper puts forward a dynamic model for a rotating functionally graded graphenereinforced(FG-GPR)sandwich metal porous cantilever pre-twisted plate(PTP),aiming to analyze its natural vibration characteristics.To this end,the mixture principle and the revised Halpin-Tsai model are used to determine the parameters of graphene and porosity distributions in the core layer.With the classical plate theory,the Rayleigh-Ritz method,and the polynomials,the dynamic equations are derived to solve for the free vibration mode shapes and frequencies of the rotating FG-GPR sandwich metal porous cantilever PTP.The comparison of natural frequencies and mode shapes with available literature results confirms the precision of the theoretical formulation and numerical computations.The bending stiffnesses are analyzed.Finally,the effects of different graphene/pore distributions,length-to-thickness/width ratios,layer thickness ratios,twist angles,and rotational speeds on the natural frequencies of the system are systematically investigated.
基金supported by the National Key R&D Program of China (No. 2018YFA0707300)the National Natural Science Foundation of China (No. 52374376)the Introduction Plan for High end Foreign Experts, China (No. G2023105001L)。
文摘Titanium plates with a Ti−O solid solution surface-hardened layer were cold roll-bonded with 304 stainless steel plates with high work hardening rates.The evolution and mechanisms affecting the interfacial bonding strength in titanium/stainless steel laminated composites were investigated.Results indicate that the hardened layer reduces the interfacial bonding strength from over 261 MPa to less than 204 MPa.During the cold roll-bonding process,the hardened layer fractures,leading to the formation of multi-scale cracks that are difficult for the stainless steel to fill.This not only hinders the development of an interlocking interface but also leads to the presence of numerous microcracks and hardened blocks along the nearly straight interface,consequently weakening the interfacial bonding strength.In metals with high work hardening rates,the conventional approach of enhancing interface interlocking and improving interfacial bonding strength by using a surface-hardened layer becomes less effective.
文摘On January 7,2025,01:05:15 UTC(9:05 a.m.local time)southern Tibet was rocked by a M_(W)7.1 earthquake(M_(W)=moment magnitude,USGS)centered(28.639°N 87.361°E)in the Lhasa Block north of the India/Eurasia Plate boundary,in a remote area about 180 km SW of Xigaze,in Dingri County of Shigatse of the Xizang Autonomous Region(Figure 1).
文摘On February 8,2025,a remote area in the Caribbean Sea was rocked by a large M_(W)7.6(USGS,2025) earthquake,centered 209 km SSW of Georgetown,the capital of the Cayman Islands,and the largest city(population~41 000) of the British Overseas Territories(Figure 1).The earthquake was significant due to its large magnitude,potential regional impact,and the possibility of generating a tsunami.
基金supported by Tianjin Science and Technology Planning Project(22YDTPJC0020).
文摘As a core power device in strategic industries such as new energy power generation and electric vehicles,the thermal reliability of IGBT modules directly determines the performance and lifetime of the whole system.A synergistic optimization structure of“inlet plate-channel spoiler columns”is proposed for the local hot spot problem during the operation of Insulated Gate Bipolar Transistor(IGBT),combined with the inherent defect of uneven flow distribution of the traditional U-type liquid cooling plate in this paper.The influences of the shape,height(H),and spacing from the spoiler column(b)of the plate on the comprehensive heat dissipation performance of the liquid cooling plate are analyzed at different Reynolds numbers,A dual heat source strategy is introduced and the effect of the optimized structure is evaluated by the temperature inhomogeneity coefficient(Φ).The results show that the optimum effect is achieved when the shape of the plate is square,H=4.5 mm,b=2 mm,and u=0.05 m/s,at which the HTPE=1.09 and Φ are reduced by 40%.In contrast,the maximum temperatures of the IGBT and the FWD(Free Wheeling Diode)chips are reduced by 8.7 and 8.4 K,respectively,and ΔP rises by only 1.58 Pa while keeping ΔT not significantly increased.This optimized configuration achieves a significant reduction in the critical chip temperature and optimization of the flow field uniformity with almost no change in the system flow resistance.It breaks through the limitation of single structure optimization of the traditional liquid cooling plate and effectively solves the problem of uneven flow in the U-shaped cooling plate,which provides a new solution with important engineering value for the thermal management of IGBT modules.
文摘Since the initial observation of carbon nanotubes(CNTs)and graphene platelets(GPLs)in the 1990 and 2000s,the demand for high-performance structural applications and multifunctional materials has driven significant interest in composite structures reinforced with GPLs and CNTs.Incorporating these nanofillers into matrix materials markedly enhances the mechanical properties of the structures.To further improve efficiency and functionality,func-tionally graded(FG)distributions of CNTs and GPLs have been proposed.This study presents an extensive review of computational approaches developed to predict the global behavior of composite structural components enhanced with CNT and GPL nanofillers.The analysis focuses on key structural elements,such as plate-type configurations,cylindrical and curved shells,and beams,emphasizing the computational techniques utilized to simulate their mechanical behavior.The utilization of three-dimensional elasticity theories and equivalent single-layer(ESL)frameworks,which are widely employed in the modeling and analysis of these composites,is comprehensively discussed.Additionally,the paper examines various mechanical performance aspects,including static,buckling,post-buckling,vibrational,and dynamic responses for the mentioned structures.The unique features of hybrid nanocomposites,combining CNTs and GPLs,are also analyzed.Furthermore,the study delves into the fabrication and processing techniques of these materials,with a particular focus on strategies to mitigate nanofiller agglomeration.The review extends to cover thermal and electrical properties,durability under environmental exposure,fatigue resistance,and vibration-damping characteristics.In conclusion,the paper underscores the necessity for ongoing advancements in computational modeling to facilitate improved design,analysis,and optimization of nanocomposite structures.Future research opportunities in this rapidly advancing domain are also outlined.
基金benefited from the financial support of the CAS Pioneer Hundred Talents Program and the Second Tibetan Plateau Scientific Expedition and Research Program (2019QZKK0708)。
文摘Throughout the 20th century, several large megathrust earthquakes were observed in the Colombia–Ecuador subduction zone which widely ruptured plate interfaces, causing considerable damage and loss of life. The occurrence of earthquakes in subduction zones is thought to be closely related to the thermal structure of the incoming plate. However, in the case of the subducting Nazca Plate beneath the Colombia–Ecuador zone, the thermal structure remains unclear, especially its hydraulic distribution. On the basis of 3D thermal models, we present new insights into the plate interface conditions of Colombia–Ecuador interplate and megathrust earthquakes. We show that the plate geometry strongly affects the along-strike thermal structure of the slab beneath Colombia and Ecuador, with the subduction of the Carnegie Ridge playing an important role. Our results further reveal that the unique geometry of the Nazca Plate is the primary reason for the relatively high temperatures of the slab beneath Colombia. We suggest that the positions of the100–200 ℃ and 350–450 ℃ isotherms on the plate interface determine the updip and downdip limits of the seismogenic zone. For Colombia–Ecuador interplate earthquakes, the released fluids control the distribution of shallow-depth earthquakes, whereas the age and geometry of the slab control the distribution of intermediate-depth earthquakes. The average temperature of the plate interface at the upper limit of large megathrust earthquakes is hotter than previously thought, which is more consistent with our understanding of the Colombia–Ecuador subduction zone. We predict that the potential location of future large seismic events could be in the rupture zone of past seismic events or offshore of northern Colombia.
文摘Intraplate deformation, influenced by tectonic, geological, and environmental factors, presents significant challenges for geodesy and geodynamics. This study focuses on quantifying intraplate deformation within the Nubian Plate using residual velocity fields derived from two GPS-based velocity models,MIDAS and HECTOR, referenced to the ITRF2014 frame. This research analyzes 20 years of daily GPS coordinate time series(2000-2021) from 25 continuously operating stations across West Africa, offering a detailed regional perspective. The primary objectives include generating outlier-free coordinate time series from station daily geocentric coordinate data, evaluating noise characteristics using spectral analysis to assess station stability, and modeling horizontal and vertical deformation patterns using residual velocity analysis. An examination of the noise patterns in the GPS coordinate time series data revealed flicker noise to be the dominant type, confirming the fairly stability of GPS stations for precise geodetic measurements. Horizontal deformation rates were found to range from 0 to 2.0 mm/yr, while vertical rates varied between-1.3 and 3.0 mm/yr, indicating localized subsidence and uplift influenced by tectonics, sediment loading, and groundwater extraction. Both MIDAS and HECTOR models captured consistent deformation patterns with an average deformation rate of 0.8 mm/yr in all coordinate components but revealed marginal regional discrepancies, reflecting differences in velocity modeling approaches. Residual velocity statistics indicate greater variability in horizontal deformation with a standard deviation of 1.6 mm/yr compared to vertical deformation with a standard deviation of 0.9 mm/yr. The larger horizontal standard deviations, 1.7 times greater than the vertical, may be due to the simultaneous use of ITRF-and GPS-based velocities to estimate the residual velocities, unlike the vertical component, which relies solely on GPS data. This study highlights the importance of integrating localized deformation data into geodetic infrastructure designs, advocating for GPS upgrades and advanced processing to improve measurement precision, enhance hazard assessments, and support resilient infrastructure development in West Africa.
基金supported by the Alliance of International Science Organizations(ANSO)Project(Grant No.ANSO-CR-PP-2022-04)the National Natural Science Foundation of China(Grant No.42174126)+1 种基金the Deep Earth Probe and Mineral Resources Exploration National Science and Technology Major Project(2024ZD1002206,2024ZD1002201)Key R&D Program of Xinjiang Uyghur Autonomous Region(Grant No.2024B03013-2).
文摘The Pamir Plateau is situated at the northwestern edge of the India-Eurasia Plate collision zone,making it a key region for studying continental collision and plateau uplift.The deep structure and dynamic processes of this region have long been of great scientific interest.This paper synthesizes recent advancements in the application of geophysical techniques to investigate the deep structure of the Pamir Plateau.The study focuses on the heterogeneity of the crust and lithosphere,the morphology of the Moho and the double Moho structure,the depth variations of the lithosphere-asthenosphere boundary(LAB),and the complex features of the mantle transition zone(MTZ).The results indicate that the deep tectonic structure of the Pamir region is closely associated with subduction of the Indian Plate,the southward compression of the Asian lithosphere,and lateral tectonic interactions from the Tarim Basin,which jointly drive the region’s uplift and deformation.The paper further examines the deep interactions between the Pamir Plateau and adjacent regions.Additionally,the study discuss key controversies in current research,such as the spatial relationship between the Moho and deep seismic zones,the mechanisms of lithosphere delamination,and its effects on shallow structural deformation,etc.
文摘In southern Asia,there are three large-scale wave-like mountains ranging from the Tibetan Plateau westward to the Iranian Plateau and the Armenian Plateau.On the southern side between plateaus,there are the Indian Peninsula and the Arabian Peninsula.What dynamic mechanisms form the directional alignment of the three plateaus with the two peninsulas remains a mystery.In the early stages of the Earth’s geological evolution,the internal structure of the Earth was that the center was a solid core,and the outmost layer was a thin equatorial crust zone separated by two thick pristine continents in polar areas,while the middle part was a deep magma fluid layer.Within the magma fluid layer,thermal and dynamic differences triggered planetary-scale vertical magma cells and led to the core-magma angular momentum exchange.When the core loses angular momentum and the magma layer gains angular momentum,the movement of upper magma fluids to the east and the tropical convergence zone(TCZ)drives the split and drift of two thick pristine continents,eventually forming the current combination of these plateaus and peninsulas and their wave-like arrangement along the east-west direction.Among them,the horizontal orthogonal convergence(collision)of upper magma fluids from the two hemispheres excited the vertical shear stress along the magma TCZ,which is the dynamic mechanism of mountain uplifts on the north side and plate subductions on the south side.To confirm this mechanism,two examples of low-level winds are used to calculate the correspondence between cyclone/anticyclonic systems generated by the orthogonal collision of airflows along the atmospheric TCZ and satellite-observed cloud systems.Such comparison can help us revisit the geological history of continental drift and orogeny.
