单相开路故障的五相永磁同步电机(permanent-magnet synchronous motor,PMSM)采用有限集模型预测转矩和磁链控制(finite-control-set model predictive torque and flux control,FCS-MPTFC)策略,存在转矩脉动大、价值函数的权重系数整...单相开路故障的五相永磁同步电机(permanent-magnet synchronous motor,PMSM)采用有限集模型预测转矩和磁链控制(finite-control-set model predictive torque and flux control,FCS-MPTFC)策略,存在转矩脉动大、价值函数的权重系数整定困难、迭代计算量大以及共模电压(commonmode voltage,CMV)高等问题。为此,该文提出一种简化FCS-MPTFC策略。首先,建立五相PMSM在单相开路故障情况下的数学模型,并分析CMV产生的机理。其次,以抑制3次谐波电流的原则合成等幅值虚拟电压矢量(virtual voltage vector,V^(3)),并将转矩和磁链价值函数等效转化为电压价值函数,同时采用无差拍控制思想计算出参考电压矢量,进而通过合理划分扇区,直接获得最优V^(3)。最后,选择方向相反的两个基电压矢量代替零矢量,以减小开路故障下的CMV。仿真和实验结果表明:所提控制策略不仅能抑制单相开路故障导致的转矩脉动、降低计算负荷和CMV、抑制电流谐波,而且具有优良的稳态和动态性能。展开更多
In permanent magnet synchronous motor(PMSM)control,the jitter problem affects the system performance,so a novel reaching lawis proposed to construct a non-singular fast terminal slidingmode controller(NFTSMC)to reduce...In permanent magnet synchronous motor(PMSM)control,the jitter problem affects the system performance,so a novel reaching lawis proposed to construct a non-singular fast terminal slidingmode controller(NFTSMC)to reduce the jitter.To enhance the immunity of the system,a disturbance observer is designed to observe and compensate for the disturbance to the sliding mode controller.In addition,considering that the controller parameters are difficult to adjust,and the traditional zebra optimization algorithm(ZOA)is prone to converge prematurely and fall into local optimum when solving the optimal solution,the improved zebra optimization algorithm(IZOA)is proposed,and the ability of the IZOA in practical applications is verified by using international standard test functions.To verify the performance of IZOA,firstly,the adjustment time of IZOA is reduced by 71.67%compared with ZOA through the step response,and secondly,the tracking error of IZOA is reduced by 51.52%compared with ZOA through the sinusoidal signal following.To verify the performance of the designed controller based on disturbance observer,the designed controller reduces the speed overshoot from 2.5%to 0.63%compared with the traditional NFTSMC in the speed mutation experiment,which is a performance improvement of 70.8%,and the designed controller outperforms the traditional NFTSMC in the load mutation experiment,which is a performance improvement of 60.0%in the case of sudden load addition,and a performance improvement of 90.0%in the case of load release,which verifies that the designed controller outperforms the traditional NFTSMC.展开更多
This article investigates the radial electromagnetic force,vibration,and noise phenomenon in a low-speed,hightorque density spoke-type permanent magnet synchronous machine(ST-PMSM)designed with assisted poles having s...This article investigates the radial electromagnetic force,vibration,and noise phenomenon in a low-speed,hightorque density spoke-type permanent magnet synchronous machine(ST-PMSM)designed with assisted poles having symmetric and asymmetric topologies.Firstly,an analytical expression for the machine radial electromagnetic force(REMF)is derived to quickly estimate the REMF characteristics for the ST-PMSM with assisted poles having symmetric and asymmetric topologies.The 2D-Fourier decomposition method is applied to investigate the radial electromagnetic force harmonics(REMFHs).Secondly,Finite element(FE)models are designed for the machine structural analysis.Subsequently,the FE models and modal analysis are explored for different design cases of the analyzed machine.Lastly,vibration and noise behavior are investigated using an FE approach for the machine designs under symmetric and asymmetric assisted poles topologies.The findings indicate an increase in the richness of REMFHs,alongside a decrease in both the fundamental frequency and the lowest non-zero order of REMF,attributed to the presence of asymmetric assisted poles.Consequently,it is investigated that while considering the vibration and noise response in STPMSMs designed with asymmetric assisted poles topologies,it is essential to thoroughly account for induced non-zero low-order harmonics and their optimization for better vibration and noise performance.展开更多
For permanent magnet synchronous machines(PMSMs),accurate inductance is critical for control design and condition monitoring.Owing to magnetic saturation,existing methods require nonlinear saturation model and measure...For permanent magnet synchronous machines(PMSMs),accurate inductance is critical for control design and condition monitoring.Owing to magnetic saturation,existing methods require nonlinear saturation model and measurements from multiple load/current conditions,and the estimation is relying on the accuracy of saturation model and other machine parameters in the model.Speed harmonic produced by harmonic currents is inductance-dependent,and thus this paper explores the use of magnitude and phase angle of the speed harmonic for accurate inductance estimation.Two estimation models are built based on either the magnitude or phase angle,and the inductances can be from d-axis voltage and the magnitude or phase angle,in which the filter influence in harmonic extraction is considered to ensure the estimation performance.The inductances can be estimated from the measurements under one load condition,which is free of saturation model.Moreover,the inductance estimation is robust to the change of other machine parameters.The proposed approach can effectively improve estimation accuracy especially under the condition with low current magnitude.Experiments and comparisons are conducted on a test PMSM to validate the proposed approach.展开更多
This article investigates the anti-disturbance and stabilization problems for the nonlinear uncertain permanent magnet synchronous motor(PMSM)with stator voltage saturation and unknown load.A smooth switching mechanis...This article investigates the anti-disturbance and stabilization problems for the nonlinear uncertain permanent magnet synchronous motor(PMSM)with stator voltage saturation and unknown load.A smooth switching mechanism is presented to structure the adaptive integral terminal sliding mode control(SMC)strategy.The control design consists of compensation control and nominal control,which improves the rapidity and accuracy of trajectory tracking.The smooth saturation model based on the error function is applied to approximate the voltage saturation phenomenon.Additionally,to deal with the adverse effects of various unknown disturbances,including model parameter uncertainties and unknown external load disturbances,an improved disturbance observer(DO)is proposed.This observer effectively suppresses the fluctuations caused by fixed gain during the starting period of the system.Finally,the experimental results under different conditions show that the proposed strategy has good tracking and disturbance suppression performances.展开更多
For the traditional methods of rotor position estimation for permanent magnet synchronous motor(PMSM),the phase shift caused by the introduction of filter will affect the accuracy of rotor position estimation to some ...For the traditional methods of rotor position estimation for permanent magnet synchronous motor(PMSM),the phase shift caused by the introduction of filter will affect the accuracy of rotor position estimation to some extent.This paper presents an improved rotor position estimation method for high frequency square wave signal injection without filter.Firstly,the traditional method injects high-frequency pulse vibration signals into the estimated shafting,and the proposed method injects high-frequency square wave signals into the estimated shafting to avoid the introduction of filters in the process of extracting rotor position information.Then,the rotor position signal is decoupled in the stationary shafting,and the rotor position error after demodulation is processed by PLL.The system realized the signal processing of rotor position without filter,which improved the convergence speed and estimation precision of rotor position and the dynamic response performance of the system.The simulation results showed that the proposed method had fast convergence speed and small phase delay,and better improved the precision of rotor position detection.展开更多
文摘单相开路故障的五相永磁同步电机(permanent-magnet synchronous motor,PMSM)采用有限集模型预测转矩和磁链控制(finite-control-set model predictive torque and flux control,FCS-MPTFC)策略,存在转矩脉动大、价值函数的权重系数整定困难、迭代计算量大以及共模电压(commonmode voltage,CMV)高等问题。为此,该文提出一种简化FCS-MPTFC策略。首先,建立五相PMSM在单相开路故障情况下的数学模型,并分析CMV产生的机理。其次,以抑制3次谐波电流的原则合成等幅值虚拟电压矢量(virtual voltage vector,V^(3)),并将转矩和磁链价值函数等效转化为电压价值函数,同时采用无差拍控制思想计算出参考电压矢量,进而通过合理划分扇区,直接获得最优V^(3)。最后,选择方向相反的两个基电压矢量代替零矢量,以减小开路故障下的CMV。仿真和实验结果表明:所提控制策略不仅能抑制单相开路故障导致的转矩脉动、降低计算负荷和CMV、抑制电流谐波,而且具有优良的稳态和动态性能。
基金supported by the Key Technology of Flexible Regulation of Energy in Green High-Efficiency/Carbon-Efficient Buildings under the Smart Park System of PowerChina Guiyang Co.,Ltd.(YJ2022-12)the Science and Technology Support Plan of Guizhou Province“Research and Application Development of Key Technologies for Flexible Regulation of Energy in High-Efficiency/Carbon-Efficient Buildings”(Guizhou Science and Technology Cooperation Support[2023]General 409).
文摘In permanent magnet synchronous motor(PMSM)control,the jitter problem affects the system performance,so a novel reaching lawis proposed to construct a non-singular fast terminal slidingmode controller(NFTSMC)to reduce the jitter.To enhance the immunity of the system,a disturbance observer is designed to observe and compensate for the disturbance to the sliding mode controller.In addition,considering that the controller parameters are difficult to adjust,and the traditional zebra optimization algorithm(ZOA)is prone to converge prematurely and fall into local optimum when solving the optimal solution,the improved zebra optimization algorithm(IZOA)is proposed,and the ability of the IZOA in practical applications is verified by using international standard test functions.To verify the performance of IZOA,firstly,the adjustment time of IZOA is reduced by 71.67%compared with ZOA through the step response,and secondly,the tracking error of IZOA is reduced by 51.52%compared with ZOA through the sinusoidal signal following.To verify the performance of the designed controller based on disturbance observer,the designed controller reduces the speed overshoot from 2.5%to 0.63%compared with the traditional NFTSMC in the speed mutation experiment,which is a performance improvement of 70.8%,and the designed controller outperforms the traditional NFTSMC in the load mutation experiment,which is a performance improvement of 60.0%in the case of sudden load addition,and a performance improvement of 90.0%in the case of load release,which verifies that the designed controller outperforms the traditional NFTSMC.
基金supported by the National Key Research and Developmen Program of China(2022YFB3403100)。
文摘This article investigates the radial electromagnetic force,vibration,and noise phenomenon in a low-speed,hightorque density spoke-type permanent magnet synchronous machine(ST-PMSM)designed with assisted poles having symmetric and asymmetric topologies.Firstly,an analytical expression for the machine radial electromagnetic force(REMF)is derived to quickly estimate the REMF characteristics for the ST-PMSM with assisted poles having symmetric and asymmetric topologies.The 2D-Fourier decomposition method is applied to investigate the radial electromagnetic force harmonics(REMFHs).Secondly,Finite element(FE)models are designed for the machine structural analysis.Subsequently,the FE models and modal analysis are explored for different design cases of the analyzed machine.Lastly,vibration and noise behavior are investigated using an FE approach for the machine designs under symmetric and asymmetric assisted poles topologies.The findings indicate an increase in the richness of REMFHs,alongside a decrease in both the fundamental frequency and the lowest non-zero order of REMF,attributed to the presence of asymmetric assisted poles.Consequently,it is investigated that while considering the vibration and noise response in STPMSMs designed with asymmetric assisted poles topologies,it is essential to thoroughly account for induced non-zero low-order harmonics and their optimization for better vibration and noise performance.
基金supported in part by the National Natural Science Foundation of China(62473387)the Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(SML2023SP241)the Department of Science and Technology of Guangdong Province(2021QN020085)。
文摘For permanent magnet synchronous machines(PMSMs),accurate inductance is critical for control design and condition monitoring.Owing to magnetic saturation,existing methods require nonlinear saturation model and measurements from multiple load/current conditions,and the estimation is relying on the accuracy of saturation model and other machine parameters in the model.Speed harmonic produced by harmonic currents is inductance-dependent,and thus this paper explores the use of magnitude and phase angle of the speed harmonic for accurate inductance estimation.Two estimation models are built based on either the magnitude or phase angle,and the inductances can be from d-axis voltage and the magnitude or phase angle,in which the filter influence in harmonic extraction is considered to ensure the estimation performance.The inductances can be estimated from the measurements under one load condition,which is free of saturation model.Moreover,the inductance estimation is robust to the change of other machine parameters.The proposed approach can effectively improve estimation accuracy especially under the condition with low current magnitude.Experiments and comparisons are conducted on a test PMSM to validate the proposed approach.
基金supported by the National Natural Science Foundation under Grant 62273189the Shandong Province Natural Science Foundation under Grant ZR2021MF005Systems Science Plus Joint Research Program of Qingdao University under Grant XT2024201 of China supporting this research work.
文摘This article investigates the anti-disturbance and stabilization problems for the nonlinear uncertain permanent magnet synchronous motor(PMSM)with stator voltage saturation and unknown load.A smooth switching mechanism is presented to structure the adaptive integral terminal sliding mode control(SMC)strategy.The control design consists of compensation control and nominal control,which improves the rapidity and accuracy of trajectory tracking.The smooth saturation model based on the error function is applied to approximate the voltage saturation phenomenon.Additionally,to deal with the adverse effects of various unknown disturbances,including model parameter uncertainties and unknown external load disturbances,an improved disturbance observer(DO)is proposed.This observer effectively suppresses the fluctuations caused by fixed gain during the starting period of the system.Finally,the experimental results under different conditions show that the proposed strategy has good tracking and disturbance suppression performances.
基金supported by National Natural Science Foundation of China(No.61863023)Lanzhou Talent Innovation and Entrepreneurship Project Task Contract(No.2019-RC-103).
文摘For the traditional methods of rotor position estimation for permanent magnet synchronous motor(PMSM),the phase shift caused by the introduction of filter will affect the accuracy of rotor position estimation to some extent.This paper presents an improved rotor position estimation method for high frequency square wave signal injection without filter.Firstly,the traditional method injects high-frequency pulse vibration signals into the estimated shafting,and the proposed method injects high-frequency square wave signals into the estimated shafting to avoid the introduction of filters in the process of extracting rotor position information.Then,the rotor position signal is decoupled in the stationary shafting,and the rotor position error after demodulation is processed by PLL.The system realized the signal processing of rotor position without filter,which improved the convergence speed and estimation precision of rotor position and the dynamic response performance of the system.The simulation results showed that the proposed method had fast convergence speed and small phase delay,and better improved the precision of rotor position detection.
