3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evalu...3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.展开更多
This paper aims to establish a 3D evaluation method for cutting surface topography of C/C composites. The cutting surface is measured by Talyscan 150, using 3D non-contact measurement. By evaluating 2D and 3D roughnes...This paper aims to establish a 3D evaluation method for cutting surface topography of C/C composites. The cutting surface is measured by Talyscan 150, using 3D non-contact measurement. By evaluating 2D and 3D roughness of C/C composite and Duralumin, the 2D evaluation method of the cutting surface topography of C/C composite loses a lot of information, and the characteristics of the surface topography of C/C composite can be comprehensively and authentically evaluated only by the 3D evaluation method. Furthermore, 3D amplitude and spatial parameters are adopted to evaluate the surface and the results show that： the topography of the C/C composite is anisotropy and there are no obvious feeding textures but abrupt peaks and valleys on surface of the C/C composite, which indicates that the machining mecha- nism is different from that of the metal. In conclusion, The C/C composite surface is evaluated using a 3D evaluation method, the roughness error is small, and the unique topography characteristics earl be au- thentically evaluated.展开更多
The evaluation method, model and process for the flood and waterlogging disaster condition by GIS,RS and GPS technology and the method for setting up disaster condition database, dyke database and historical disaster ...The evaluation method, model and process for the flood and waterlogging disaster condition by GIS,RS and GPS technology and the method for setting up disaster condition database, dyke database and historical disaster damage database are presented. An index of flood damage degree(FDD) used to evaluate the relative degree of disaster loss and divide flood and waterlogging area is suggested. The value of flood damage degree can be calculated as follows :taking the various disaster losses of sample area in a base year as standard value and computing the ratios of various disaster loss values in different areas and years to the standard flood disaster loss values, then summing up the weighted ratios. The computed results are the value of flood damage degree in the every year. The macroscopic flood disaster distribution can be evaluated by the values of flood loss degree.展开更多
Methods for evaluating the resistance to cathodic disbondment （RCD） of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests （CDT） have some dis...Methods for evaluating the resistance to cathodic disbondment （RCD） of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests （CDT） have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method （PEM）, was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding （CD） were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.展开更多
The evaluation of urban underground space(UUS)suitability involves multiple indicators.Assigning weight to these indicators is crucial for accurate assessment.This paper presents a method for spatially variable weight...The evaluation of urban underground space(UUS)suitability involves multiple indicators.Assigning weight to these indicators is crucial for accurate assessment.This paper presents a method for spatially variable weight assignment of indicators using the order relation analysis method(G1-method),the entropy weight method,an improved grey relational analysis(GRA)and a set of spatial weight adjustment coefficients.First,the subjective and objective weights of indicators for engineering geological and hydrogeological conditions were determined by the G1-method and entropy weight method,respectively,and their combined weights were then obtained using the principle of minimum discriminatory information.This study highlighted the impact of surface restrictions,such as buildings,on UUS,and the degree of the influence of these buildings gradually decreased with the increase in depth of the rock and soil mass in UUS,which resulted in changes in weights of indicators with depth.To address this issue,a coefficient was defined as the standardized value of the ratio of additional stress applied by restrictions to the self-weight stress of soil at the same depth to modify the combined weights so that all weights of indicators could vary in space.Finally,an improved GRA was used to determine the suitability level of each evaluation cell using the maximum correlation criterion.This method was applied to the 3D suitability evaluation of UUS in Sanlong Bay,Foshan City,Guangdong Province,China,including 16 evaluation indexes.This study comprehensively considered the influence of multiple factors,thereby providing reference for evaluating the suitability of UUS in big cities.展开更多
基金Funded by the National Natural Science Foundation of China(No.50875036)
文摘3D evaluation method of cutting surface topography for C/Ph composites was established.The cutting surface was measured by Talyscan 150,using 3D non-contact measurement.Through the results of 2D and 3D roughness evaluating for C/Ph composite and Duralumin,the 2D evaluation method of the cutting surface topography of C/Ph composite loses a lot of information,the characteristics of the surface topography of C/Ph composite can be comprehensively and authentically evaluated only by 3D evaluation method.Furthermore,3D amplitude and spatial parameters were adopted to evaluate the surface.The results show that： the topography of the C/Ph composite is anisotropic,there are more valleys in the machined surface of C/Ph than that of duralumin,and there are not obvious feeding textures for C/Ph,which indicates the machining mechanism is different from the metal.In conclusion,the topography of the C/Ph composite cutting surface is anisotropic;the cutting surface of C/Ph composite needs 3D evaluation method.
基金Supported by the National Natural Science Foundation of China (No. 50875036)
文摘This paper aims to establish a 3D evaluation method for cutting surface topography of C/C composites. The cutting surface is measured by Talyscan 150, using 3D non-contact measurement. By evaluating 2D and 3D roughness of C/C composite and Duralumin, the 2D evaluation method of the cutting surface topography of C/C composite loses a lot of information, and the characteristics of the surface topography of C/C composite can be comprehensively and authentically evaluated only by the 3D evaluation method. Furthermore, 3D amplitude and spatial parameters are adopted to evaluate the surface and the results show that： the topography of the C/C composite is anisotropy and there are no obvious feeding textures but abrupt peaks and valleys on surface of the C/C composite, which indicates that the machining mecha- nism is different from that of the metal. In conclusion, The C/C composite surface is evaluated using a 3D evaluation method, the roughness error is small, and the unique topography characteristics earl be au- thentically evaluated.
文摘The evaluation method, model and process for the flood and waterlogging disaster condition by GIS,RS and GPS technology and the method for setting up disaster condition database, dyke database and historical disaster damage database are presented. An index of flood damage degree(FDD) used to evaluate the relative degree of disaster loss and divide flood and waterlogging area is suggested. The value of flood damage degree can be calculated as follows :taking the various disaster losses of sample area in a base year as standard value and computing the ratios of various disaster loss values in different areas and years to the standard flood disaster loss values, then summing up the weighted ratios. The computed results are the value of flood damage degree in the every year. The macroscopic flood disaster distribution can be evaluated by the values of flood loss degree.
基金This work is financially supported by the National Natural Science Foundation of China (No.2992021).
文摘Methods for evaluating the resistance to cathodic disbondment （RCD） of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests （CDT） have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method （PEM）, was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding （CD） were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.
基金funded by the National Key R&D Program of China(Grant No.2023YFC3007001).
文摘The evaluation of urban underground space(UUS)suitability involves multiple indicators.Assigning weight to these indicators is crucial for accurate assessment.This paper presents a method for spatially variable weight assignment of indicators using the order relation analysis method(G1-method),the entropy weight method,an improved grey relational analysis(GRA)and a set of spatial weight adjustment coefficients.First,the subjective and objective weights of indicators for engineering geological and hydrogeological conditions were determined by the G1-method and entropy weight method,respectively,and their combined weights were then obtained using the principle of minimum discriminatory information.This study highlighted the impact of surface restrictions,such as buildings,on UUS,and the degree of the influence of these buildings gradually decreased with the increase in depth of the rock and soil mass in UUS,which resulted in changes in weights of indicators with depth.To address this issue,a coefficient was defined as the standardized value of the ratio of additional stress applied by restrictions to the self-weight stress of soil at the same depth to modify the combined weights so that all weights of indicators could vary in space.Finally,an improved GRA was used to determine the suitability level of each evaluation cell using the maximum correlation criterion.This method was applied to the 3D suitability evaluation of UUS in Sanlong Bay,Foshan City,Guangdong Province,China,including 16 evaluation indexes.This study comprehensively considered the influence of multiple factors,thereby providing reference for evaluating the suitability of UUS in big cities.
