Designing and fabricating high-performance photovoltaic devices have remained a major challenge in organic solar cell technologies. In this work, the photovoltaic performances of BTBPD-PC61BM system were theoretically...Designing and fabricating high-performance photovoltaic devices have remained a major challenge in organic solar cell technologies. In this work, the photovoltaic performances of BTBPD-PC61BM system were theoretically investigated by means of density functional theory calculations coupled with the Marcus charge transfer model in order to seek novel photovoltaic systems. Moreover, the hole-transfer properties of BTBPD thin-film were also studied by an amorphous cell with 100 BTBPD molecules. Results revealed that the BTBPD- PC61BM system possessed a middle-sized open-circuit voltage of 0.70 V, large short-circuit current density of 16.874 mA/cm2, large fill factor of 0.846, and high power conversion effi- ciency of 10%. With the Marcus model, the charge-dissociation rate constant was predicted to be as fast as 3.079×10^13 s^-1 in the BTBPD-PC61BM interface, which was as 3-5 orders of magnitude large as the decay （radiative and non-radiative） rate constant （108-10^10 s^-1）, indicating very high charge-dissociation efficiency （-100%） in the BTBPD-PC61BM system. Furthermore, by the molecular dynamics simulation, the hole mobility for BTBPD thin-film was predicted to be as high as 3.970× 10^-3 cm^2V^-1s^-1, which can be attributed to its tight packing in solid state.展开更多
以废打印机壳PC/ABS再生粒子(R-PC/ABS)为基体材料,对苯二酚双(二苯基磷酸脂)(HDP)和梯形倍半硅氧烷(TSQ)为阻燃剂,采用熔融共混制备了无卤阻燃PC/ABS,对其阻燃性能、力学性能、尺寸稳定性和负荷热变形温度(HDT)进行分析,结果发现,TSQ...以废打印机壳PC/ABS再生粒子(R-PC/ABS)为基体材料,对苯二酚双(二苯基磷酸脂)(HDP)和梯形倍半硅氧烷(TSQ)为阻燃剂,采用熔融共混制备了无卤阻燃PC/ABS,对其阻燃性能、力学性能、尺寸稳定性和负荷热变形温度(HDT)进行分析,结果发现,TSQ可以阻燃R-PC/ABS,并且,对力学性能、尺寸稳定性和HDT影响较小,R-PC/ABS/0.8TSQ的LOI为29.8%,阻燃达到3.0 mm V-0和2.0 mm V-1级;HDP可以有效地阻燃R-PC/ABS,但是,对力学性能、尺寸稳定性和HDT的负面影响较大,R-PC/ABS/12HDP的LOI为36.1%,阻燃可达到UL 941.0 mm V-0级,与R-PC/ABS相比,HDT、拉伸强度、弯曲强度、弯曲模量和缺口冲击强度分别降低了20.2℃、26.6%、14.5%、16.9%和60.9%;R-PC/ABS/0.8TSQ/6HDP的LOI为35.7%,阻燃级别达到UL 941.0 mm V-0级,与R-PC/ABS/12HDP相比,模后收缩率(PMS)降低了19.7%,HDT、拉伸强度、弯曲强度、弯曲模量和缺口冲击强度分别提高了13℃、21.0%、11.3%、14.3%和85.9%。展开更多
As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modul...As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modular architecture controllers （OMAC）. First, the software and hardware platform is chosen and software realization methodology for the CNC system is determined. Second, static modeling methods of an open architecture controller inclusive of object-oriented （OO） programming technology, dynamic link library （DLL） technology and system modules partition are investigated. Third, the dynamical behavioral modeling and the data flow representation of open architecture controller are discussed, which are both described in hierarchy fmite state machine （FSM） model. Fourth, a reusable software module model is established to develop software function module library. Finally, a 3-axis milling machine tool test-bed, named for HIT-CNC, is successfully designed by means of the constructed software function module library and the system configuring method. The experimental results show that, besides increasing the degree of reusability and openness, application of above-mentioned method- ology leads to significant decrease of development time as well as maintenance cost.展开更多
A computational strategy is presented for the nonlinear dynamic analysis of large- scale combined finite/discrete element systems on a PC cluster.In this strategy,a dual-level domain decomposition scheme is adopted to...A computational strategy is presented for the nonlinear dynamic analysis of large- scale combined finite/discrete element systems on a PC cluster.In this strategy,a dual-level domain decomposition scheme is adopted to implement the dynamic domain decomposition.The domain decomposition approach perfectly matches the requirement of reducing the memory size per processor of the calculation.To treat the contact between boundary elements in neighbouring subdomains,the elements in a subdomain are classified into internal,interfacial and external elements.In this way,all the contact detect algorithms developed for a sequential computation could be adopted directly in the parallel computation.Numerical examples show that this implementation is suitable for simulating large-scale problems.Two typical numerical examples are given to demonstrate the parallel efficiency and scalability on a PC cluster.展开更多
In this paper,an embedded real-time control system for automatic rotor balancing was studied.Benefiting from the modular design,this system can be easily re-constituted or expanded under different working conditions.T...In this paper,an embedded real-time control system for automatic rotor balancing was studied.Benefiting from the modular design,this system can be easily re-constituted or expanded under different working conditions.The special designed hardware resists harsh environment.As an embedded application,it was very important to save system consumptions on both hardware and software,so the algorithms for unbalance vibration identification and attenuation were deduced,meantime a unified fast algorithm structure was achieved through the geometric analysis.Based on this structure,the signal processing algorithm was tested by an open data source,while the control algorithm was simulated using a basic rotor model,and then connected to a hyper gravity machine running online auto-balancing.The result confirms that the unbalancing vibration is effectively restrained.展开更多
基金This work was supported by the National Natural Science Foundation of China （No.21373132, No.21502109, No.21603133）, the Education Department of Shmunxi Provincial Government Research Projects （No.16JK1142, No.16JK1134）, and the Scientific Research Foundation of Shaanxi University of Technology for Recruited Talents （No.SLGKYQD2-13, No.SLGKYQD2-10, No.SLGQD14-10）.
文摘Designing and fabricating high-performance photovoltaic devices have remained a major challenge in organic solar cell technologies. In this work, the photovoltaic performances of BTBPD-PC61BM system were theoretically investigated by means of density functional theory calculations coupled with the Marcus charge transfer model in order to seek novel photovoltaic systems. Moreover, the hole-transfer properties of BTBPD thin-film were also studied by an amorphous cell with 100 BTBPD molecules. Results revealed that the BTBPD- PC61BM system possessed a middle-sized open-circuit voltage of 0.70 V, large short-circuit current density of 16.874 mA/cm2, large fill factor of 0.846, and high power conversion effi- ciency of 10%. With the Marcus model, the charge-dissociation rate constant was predicted to be as fast as 3.079×10^13 s^-1 in the BTBPD-PC61BM interface, which was as 3-5 orders of magnitude large as the decay （radiative and non-radiative） rate constant （108-10^10 s^-1）, indicating very high charge-dissociation efficiency （-100%） in the BTBPD-PC61BM system. Furthermore, by the molecular dynamics simulation, the hole mobility for BTBPD thin-film was predicted to be as high as 3.970× 10^-3 cm^2V^-1s^-1, which can be attributed to its tight packing in solid state.
文摘以废打印机壳PC/ABS再生粒子(R-PC/ABS)为基体材料,对苯二酚双(二苯基磷酸脂)(HDP)和梯形倍半硅氧烷(TSQ)为阻燃剂,采用熔融共混制备了无卤阻燃PC/ABS,对其阻燃性能、力学性能、尺寸稳定性和负荷热变形温度(HDT)进行分析,结果发现,TSQ可以阻燃R-PC/ABS,并且,对力学性能、尺寸稳定性和HDT影响较小,R-PC/ABS/0.8TSQ的LOI为29.8%,阻燃达到3.0 mm V-0和2.0 mm V-1级;HDP可以有效地阻燃R-PC/ABS,但是,对力学性能、尺寸稳定性和HDT的负面影响较大,R-PC/ABS/12HDP的LOI为36.1%,阻燃可达到UL 941.0 mm V-0级,与R-PC/ABS相比,HDT、拉伸强度、弯曲强度、弯曲模量和缺口冲击强度分别降低了20.2℃、26.6%、14.5%、16.9%和60.9%;R-PC/ABS/0.8TSQ/6HDP的LOI为35.7%,阻燃级别达到UL 941.0 mm V-0级,与R-PC/ABS/12HDP相比,模后收缩率(PMS)降低了19.7%,HDT、拉伸强度、弯曲强度、弯曲模量和缺口冲击强度分别提高了13℃、21.0%、11.3%、14.3%和85.9%。
基金Key Development Program of ScienceTechnology of Heilongjiang Province, China (GB05A501)
文摘As a key te..hnology in the field of advanced manufacturing, an open architecture controller is studied. In order to develop an open architecture software-CNC system on personal computer （PC） according to open modular architecture controllers （OMAC）. First, the software and hardware platform is chosen and software realization methodology for the CNC system is determined. Second, static modeling methods of an open architecture controller inclusive of object-oriented （OO） programming technology, dynamic link library （DLL） technology and system modules partition are investigated. Third, the dynamical behavioral modeling and the data flow representation of open architecture controller are discussed, which are both described in hierarchy fmite state machine （FSM） model. Fourth, a reusable software module model is established to develop software function module library. Finally, a 3-axis milling machine tool test-bed, named for HIT-CNC, is successfully designed by means of the constructed software function module library and the system configuring method. The experimental results show that, besides increasing the degree of reusability and openness, application of above-mentioned method- ology leads to significant decrease of development time as well as maintenance cost.
基金The project supported by the National Natural Science Foundation of China (10372114) and the Engineering and Physical Sciences Research Council (EPSRC) of UK (GR/R21219)
文摘A computational strategy is presented for the nonlinear dynamic analysis of large- scale combined finite/discrete element systems on a PC cluster.In this strategy,a dual-level domain decomposition scheme is adopted to implement the dynamic domain decomposition.The domain decomposition approach perfectly matches the requirement of reducing the memory size per processor of the calculation.To treat the contact between boundary elements in neighbouring subdomains,the elements in a subdomain are classified into internal,interfacial and external elements.In this way,all the contact detect algorithms developed for a sequential computation could be adopted directly in the parallel computation.Numerical examples show that this implementation is suitable for simulating large-scale problems.Two typical numerical examples are given to demonstrate the parallel efficiency and scalability on a PC cluster.
基金National Natural Science Foundation of China(No.50635010)
文摘In this paper,an embedded real-time control system for automatic rotor balancing was studied.Benefiting from the modular design,this system can be easily re-constituted or expanded under different working conditions.The special designed hardware resists harsh environment.As an embedded application,it was very important to save system consumptions on both hardware and software,so the algorithms for unbalance vibration identification and attenuation were deduced,meantime a unified fast algorithm structure was achieved through the geometric analysis.Based on this structure,the signal processing algorithm was tested by an open data source,while the control algorithm was simulated using a basic rotor model,and then connected to a hyper gravity machine running online auto-balancing.The result confirms that the unbalancing vibration is effectively restrained.
