Influence of multiple structural parameters on the performance of a gun launch system driven by highpressure reactive gases is important for structural design and performance adjustment.A coupled lumped parameter mode...Influence of multiple structural parameters on the performance of a gun launch system driven by highpressure reactive gases is important for structural design and performance adjustment.A coupled lumped parameter model was utilized to predict the propellant combustion,and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel.The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS.The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments.Based on the coupled model,the influence of structural parameters of a medium-caliber gun on the system performance was investigated.In order to reduce the research costs,orthogonal tests were designed to investigate the comprehensive effects of the parameters.According to statistical analysis,the important order of the structural parameters on the launching process was obtained.The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun.The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance.展开更多
In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of w...In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of warm compacted samples was studied. According to the orthogonal test method, the authors systematically study the influence of the different compaction pressure, condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process, and put forward the optimal process parameter of warm compaction experiment. It is found that, a high compaction pressure （≥700 MPa）, die wall lubrication combined with a small amount of internal lubricants, and fitting compaction temperature by different condition of lubrication, are the optimal parameters in warm compaction process.展开更多
Triaxial tests,a staple in rock engineering,are labor-intensive,sample-demanding,and costly,making their optimization highly advantageous.These tests are essential for characterizing rock strength,and by adopting a fa...Triaxial tests,a staple in rock engineering,are labor-intensive,sample-demanding,and costly,making their optimization highly advantageous.These tests are essential for characterizing rock strength,and by adopting a failure criterion,they allow for the derivation of criterion parameters through regression,facilitating their integration into modeling programs.In this study,we introduce the application of an underutilized statistical technique—orthogonal regression—well-suited for analyzing triaxial test data.Additionally,we present an innovation in this technique by minimizing the Euclidean distance while incorporating orthogonality between vectors as a constraint,for the case of orthogonal linear regression.Also,we consider the Modified Least Squares method.We exemplify this approach by developing the necessary equations to apply the Mohr-Coulomb,Murrell,Hoek-Brown,andÚcar criteria,and implement these equations in both spreadsheet calculations and R scripts.Finally,we demonstrate the technique's application using five datasets of varied lithologies from specialized literature,showcasing its versatility and effectiveness.展开更多
To investigate the impact of guide vane geometry—specifically,outlet angle,blade count,and radial height—on the performance of a Pump as Turbine(PAT),radial guide vanes were introduced upstream of the impeller in an...To investigate the impact of guide vane geometry—specifically,outlet angle,blade count,and radial height—on the performance of a Pump as Turbine(PAT),radial guide vanes were introduced upstream of the impeller in an IS80-50-315 low-specific-speed centrifugal PAT.Using an orthogonal test design,numerical simulations were conducted on 16 different PAT configurations,and the influence of vane geometry on performance was analyzed through a range analysis to determine the optimal parameter combinations.The results indicate that the number of guide vane blades significantly affects both the hydraulic efficiency and water head of the PAT under optimal operating conditions.Notably,the hydraulic efficiency of Configuration No.1(featuring five guide vane blades,a 6°outlet angle,and a 46 mm radial height)is 4.31%higher than that of Configuration No.13(with the same blade count but a 9°outlet angle and a 52 mm radial height).Additionally,Configuration No.1 exhibits lower turbulence kinetic energy dissipation and reduced blade loading.Furthermore,the study reveals that a smaller guide vane outlet angle and reduced radial height contribute to improved operational stability.展开更多
The uniaxial compressive strength(UCS)of rocks is a vital geomechanical parameter widely used for rock mass classification,stability analysis,and engineering design in rock engineering.Various UCS testing methods and ...The uniaxial compressive strength(UCS)of rocks is a vital geomechanical parameter widely used for rock mass classification,stability analysis,and engineering design in rock engineering.Various UCS testing methods and apparatuses have been proposed over the past few decades.The objective of the present study is to summarize the status and development in theories,test apparatuses,data processing of the existing testing methods for UCS measurement.It starts with elaborating the theories of these test methods.Then the test apparatus and development trends for UCS measurement are summarized,followed by a discussion on rock specimens for test apparatus,and data processing methods.Next,the method selection for UCS measurement is recommended.It reveals that the rock failure mechanism in the UCS testing methods can be divided into compression-shear,compression-tension,composite failure mode,and no obvious failure mode.The trends of these apparatuses are towards automation,digitization,precision,and multi-modal test.Two size correction methods are commonly used.One is to develop empirical correlation between the measured indices and the specimen size.The other is to use a standard specimen to calculate the size correction factor.Three to five input parameters are commonly utilized in soft computation models to predict the UCS of rocks.The selection of the test methods for the UCS measurement can be carried out according to the testing scenario and the specimen size.The engineers can gain a comprehensive understanding of the UCS testing methods and its potential developments in various rock engineering endeavors.展开更多
This paper introduces a kind of substitute bench testing method for vehicle application development and testing method of the test requirements,including battery fast conversion cycle test equipment,enter type incubat...This paper introduces a kind of substitute bench testing method for vehicle application development and testing method of the test requirements,including battery fast conversion cycle test equipment,enter type incubator,liquid-cooled machine and ancillary equipment composed of a set of test system,through the walk-in constant temperature box to simulate the new energy vehicles under different environmental conditions of the test requirements,Liquid-cooled machine and auxiliary parts to complete the battery thermal management system need cooling fluid conditions,the battery conversion cycle test equipment to simulate the dc fast charging way of filling pile,complete battery thermal management system test,shorten the filling fast charging time and improve battery fast charge security,for troubleshooting and data collection and analysis,Improve work efficiency,save costs,and eliminate customer anxiety about battery life and charging time.展开更多
An analytical model for contact area and contact stress considering the loading history in incremental sheet forming(ISF)was established.Then,by integrating with the directional characteristics of friction force and h...An analytical model for contact area and contact stress considering the loading history in incremental sheet forming(ISF)was established.Then,by integrating with the directional characteristics of friction force and horizontal force in the process,a friction test method reflecting the forming characteristics of ISF was proposed.Friction coefficients during the forming processes of parts with different wall angles were measured under various plane curves,process paths,and lubrication conditions.Furthermore,the accuracy of the analytical model,as well as the measured friction coefficients and their variation trends,was verified through comparative analysis with experimental results,simulation data,and outcomes from other existing models.The results indicate that the influence of the plane curve characteristics and process paths of parts on the friction condition is not significant.Under the lubrication conditions of L-HM46 oil,MoS_(2)grease,graphite powder,and dry friction,the friction coefficient shows a gradually increasing trend.Notably,when the wall angle is≤40°,the friction coefficient remains relatively constant;however,when the wall angle exceeds 40°,the friction coefficient increases progressively.展开更多
During fully mechanized caving mining of thick coal seams,a large amount of strain energy accumulates in the roof,especially when the roof is thick and hard,making it difficultfor the roof to collapse naturally.When t...During fully mechanized caving mining of thick coal seams,a large amount of strain energy accumulates in the roof,especially when the roof is thick and hard,making it difficultfor the roof to collapse naturally.When the roof eventually collapses,the accumulated energy is released instantaneously,exerting a strong impact on the roadway.To address this issue,we proposed the synergistic control method of directional comprehensive pressure relief and energy-absorbing support(PREA)for roadways with hard roofs.In this study,we developed a three-dimensional physical model test apparatus for roof cutting and pressure relief.The 122108 ventilation roadway at the Caojiatan Coal Mine,which has a thick and hard roof,was taken as the engineering example.We analyzed the evolution patterns of stress and displacement in both the stope and the roadway surrounding rocks under different schemes.The PREA reinforcement mechanism for the roadway was investigated through comparative model tests between the new and original methods.The results showed that,compared to the original method,the new method reduced surrounding rock stress by up to 60.4%,and the roadway convergence decreased by up to 52.1%.Based on these results,we proposed corresponding engineering recommendations,which can guide fieldreinforcement design and application.The results demonstrate that the PREA method effectively reduces stress and ensures the safety and stability of the roadway.展开更多
The purpose of this study is to evaluate the price and composition of blood glucose meters and blood glucose test papers in Hubei Province,so as to improve the affordability of blood glucose monitoring for diabetes pa...The purpose of this study is to evaluate the price and composition of blood glucose meters and blood glucose test papers in Hubei Province,so as to improve the affordability of blood glucose monitoring for diabetes patients.Using the standard survey method jointly developed by the World Health Organization(WHO)and Health Action International(HAI)for drug price composition analysis,central level data was collected through literature review,policy review,and interviews with key informants.Field research was conducted in Wuhan and Yichang to trace price data at various levels of the supply chain.At the central level,data shows that China has implemented multiple policies related to the management and pricing of blood glucose meters and test strips,but has not yet introduced price restrictions for blood glucose meters and test strips;At the supply chain level,data shows that the price composition of blood glucose meters and test strips in Hubei Province is mainly composed of manufacturer prices and retail markups,followed by supply chain taxes and wholesale markups.It can be seen from this that China has established a comprehensive medical device registration,sales,quality control and management standard system through a series of policies.At present,China has not issued price policies for blood glucose meters and blood glucose test papers.Therefore,we can reduce product prices by including medical insurance,government subsidies,competitive bidding,and reducing supply chain taxes,thus improving the affordability of blood glucose monitoring for diabetes patients.展开更多
Fuzzy analysis method for orthogonal test was used to study the effect of different sowing depth, seed soaking time, illumination intensity and culture soil on the seed germination rate of Eurya chinensis. The results...Fuzzy analysis method for orthogonal test was used to study the effect of different sowing depth, seed soaking time, illumination intensity and culture soil on the seed germination rate of Eurya chinensis. The results showed that the effect of seed soaking time on the sowing and seedling of Eurya chinensis was the biggest, and the ethers were illumination intensity, sowing depth and culture soil. The germi- nation rate was the highest when composite soil was used as culture soil and seeds were soaked for 48 h and sowed in topsoil, and a layer of sunshade net was used.展开更多
[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol ...[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol times and extraction time were investigated by HPLC-MS combined with orthogonal test to optimize extraction process using the content of monoester alkaloids( the sum of benzoyl neoaconitine,benzoyl hypoaconitine and benzoyl aconitine) as an index.[Results]The optimum ethanol extraction technology was as follows: 75% ethanol,ethanol amount 25 times of the medicinal material,and each extraction for 1. 5 h.[Conclusions] The optimal extraction technology is simple,feasible,stable and reliable. It can provide reference for the industrial production and quality control of monoester alkaloids from Radix Aconiti Preparata.展开更多
At present,there is currently a lack of unified standard methods for the determination of antimony content in groundwater in China.The precision and trueness of related detection technologies have not yet been systema...At present,there is currently a lack of unified standard methods for the determination of antimony content in groundwater in China.The precision and trueness of related detection technologies have not yet been systematically and quantitatively evaluated,which limits the effective implementation of environmental monitoring.In response to this key technical gap,this study aimed to establish a standardized method for determining antimony in groundwater using Hydride Generation–Atomic Fluorescence Spectrometry(HG-AFS).Ten laboratories participated in inter-laboratory collaborative tests,and the statistical analysis of the test data was carried out in strict accordance with the technical specifications of GB/T 6379.2—2004 and GB/T 6379.4—2006.The consistency and outliers of the data were tested by Mandel's h and k statistics,the Grubbs test and the Cochran test,and the outliers were removed to optimize the data,thereby significantly improving the reliability and accuracy.Based on the optimized data,parameters such as the repeatability limit(r),reproducibility limit(R),and method bias value(δ)were determined,and the trueness of the method was statistically evaluated.At the same time,precision-function relationships were established,and all results met the requirements.The results show that the lower the antimony content,the lower the repeatability limit(r)and reproducibility limit(R),indicating that the measurement error mainly originates from the detection limit of the method and instrument sensitivity.Therefore,improving the instrument sensitivity and reducing the detection limit are the keys to controlling the analytical error and improving precision.This study provides reliable data support and a solid technical foundation for the establishment and evaluation of standardized methods for the determination of antimony content in groundwater.展开更多
[Objective] This study was to screen the economic or stable PCR system of rice and detect the generality of the selected system in different molecular markers based on PCR.[Method] With DNA extracted from rice leaves ...[Objective] This study was to screen the economic or stable PCR system of rice and detect the generality of the selected system in different molecular markers based on PCR.[Method] With DNA extracted from rice leaves by CTAB method as the template,PCR system was optimized by L16(45)orthogonal design.[Result] Clear bands were amplified from 16 different combinations,but the amplification effects and yields had difference.The most economic and applicable system was as follows:20 ng DNA template,150 μmol/L dNT...展开更多
In order to investigate the permanent deformation behavior of asphalt mixtures from discontinuity, the virtual rutting test of asphalt mixtures is developed by the discrete element method （DEM）. A digital specimen g...In order to investigate the permanent deformation behavior of asphalt mixtures from discontinuity, the virtual rutting test of asphalt mixtures is developed by the discrete element method （DEM）. A digital specimen generation procedure considering aggregate gradation and irregular shape is developed based on the probability theory and the Monte Carlo method. The virtual rutting test is then conducted based on the generated digital specimen. In addition, on the basis of the time-temperature superposition （TTS） principle, a calculation method is used to reduce the computation time of the virtual rutting test. The simulation results are compared with the laboratory measurements. The results show that the calculation method based on the TFS principle in the discrete element （DE） viscoelastic model can significantly reduce the computation time. The deformation law of asphalt mixtures in the virtual rutting test is similar to the laboratory measurements, and the deformation and the dynamic stability of the virtual rutting test are slightly greater than the laboratory measurements. The two-dimensional virtual rutting test can predict the permanent deformation performance of asphalt mixtures.展开更多
Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method br...Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.展开更多
Aim To improve the efficiency of fatigue material tests and relevant statistical treatment of test data. Methods\ Least square approach and other special treatments were used. Results and Conclusion\ The concepts...Aim To improve the efficiency of fatigue material tests and relevant statistical treatment of test data. Methods\ Least square approach and other special treatments were used. Results and Conclusion\ The concepts of each phase in fatigue tests and statistical treatment are clarified. The method proposed leads to three important properties. Reduced number of specimens brings to the advantage of lowering test expenditures. The whole test procedure has more flexibility for there is no need to conduct many tests at the same stress level as in traditional cases.展开更多
In order to find the test cube for industrial robots as specified by ISO 9283, a seed cube is grown up in an irregular working space of the robot, provided that the corners of the cube do not exceed the boundary of t...In order to find the test cube for industrial robots as specified by ISO 9283, a seed cube is grown up in an irregular working space of the robot, provided that the corners of the cube do not exceed the boundary of the working space. All possible cubes are searched, and the cube with the maximum volume is selected. The calculation examples show that the method of growth can be used for a variety of industrial robots. The method of growth can determine the test cube and test points of irregular working space according to ISO 9283, and can avoid blindness and randomness in the selection of test points.展开更多
[Objective] This study was conducted to establish a microbial limit test method for Bupi Qiangli Ointment. [Method] The conventional method and medium dilution method were used for bacterial, mold and yeast counting i...[Objective] This study was conducted to establish a microbial limit test method for Bupi Qiangli Ointment. [Method] The conventional method and medium dilution method were used for bacterial, mold and yeast counting in sample recovery test. [Result] The medium dilution method （1：10 test solution, 0.5 ml/plate） could effectively eliminate the inhibition effect of the Bupi Qiangli Ointment, and the recovery of Staphylococcus aureus was greater than 70% in the 3 batches of samples; and the conventional method exhibited the recoveries of E. coil, Bacillus subtilis, Candida albicans and Aspergillus greater than 70% in the 3 batches of samples. [Conclusion] Due to Bupi Qiangli Ointment has strongly antibacterial effect on Staphylococcus au- reus, the medium dilution method was used for bacterial counting, and the conventional method was used for mold and yeast counting; and the conventional method was used for controlled bacterium examination of E. coll.展开更多
A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the opti...A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the optimal liposome preparation conditions by considering all the evaluation indexes. Liposomes were made by the modified reverse-phase evaporation method and the properties of liposomes including size, encapsulation efficiency and physical stability were selected as the evaluation indexes to indicate the quality of liposomes. The experimental data of these properties were analyzed by three different methods including direct observation, variance analysis and fuzzy analytical method. The optimal preparation conditions obtained from these methods were validated with further experiments. The results of all possible combinations of levels for all factors in orthogonal experiments were acquired by the fuzzy analytical method. All evaluation indexes were taken into account and the optimal preparation condition was obtained. The optimal preparation conditions from direct observation and fuzzy analytical method were different and further validation studies indicated that the optimal conditions obtained from the fuzzy analytical method were in agreement with that from traditional statistical analysis. Fuzzy analytical method avoided the problem resulted from the traditional method, in which different levels of the same factor were obtained when considering different evaluation indexes. More information could be obtained from the fuzzy analytical method and the blind area within the experimental range was eliminated. As a result, fuzzy analytical method can be applied in the optimization processes of liposome preparation.展开更多
基金the financial support from the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYLX_0399)
文摘Influence of multiple structural parameters on the performance of a gun launch system driven by highpressure reactive gases is important for structural design and performance adjustment.A coupled lumped parameter model was utilized to predict the propellant combustion,and a dynamic finite element method was applied to approximate the mechanical interactions between the projectile and the barrel.The combustion and the mechanical interactions were coupled through a user subroutine interface in ABAQUS.The correctness and the capability of the finite element approximations in capturing small structural changes were validated by comparing predicted resistance with experiments.Based on the coupled model,the influence of structural parameters of a medium-caliber gun on the system performance was investigated.In order to reduce the research costs,orthogonal tests were designed to investigate the comprehensive effects of the parameters.According to statistical analysis,the important order of the structural parameters on the launching process was obtained.The results indicate that the influence of the width of the rotating band stands out among the studied parameters in the gun.The work provides a method to investigate the influence of multiple parameters on system performance and gives guidance for controlling the system performance.
基金the National Scientific and Technological Project(No.MKPT-2004-09ZD)the Innovative Engineering Program of Central South University
文摘In order to achieve higher density of P/M steels using the die wall lubrication compacting method or powder lubricant in warm compaction process, the influence of different process parameters on the green density of warm compacted samples was studied. According to the orthogonal test method, the authors systematically study the influence of the different compaction pressure, condition of lubrication and compaction temperature on the green density of the sample in the warm compaction process, and put forward the optimal process parameter of warm compaction experiment. It is found that, a high compaction pressure （≥700 MPa）, die wall lubrication combined with a small amount of internal lubricants, and fitting compaction temperature by different condition of lubrication, are the optimal parameters in warm compaction process.
文摘Triaxial tests,a staple in rock engineering,are labor-intensive,sample-demanding,and costly,making their optimization highly advantageous.These tests are essential for characterizing rock strength,and by adopting a failure criterion,they allow for the derivation of criterion parameters through regression,facilitating their integration into modeling programs.In this study,we introduce the application of an underutilized statistical technique—orthogonal regression—well-suited for analyzing triaxial test data.Additionally,we present an innovation in this technique by minimizing the Euclidean distance while incorporating orthogonality between vectors as a constraint,for the case of orthogonal linear regression.Also,we consider the Modified Least Squares method.We exemplify this approach by developing the necessary equations to apply the Mohr-Coulomb,Murrell,Hoek-Brown,andÚcar criteria,and implement these equations in both spreadsheet calculations and R scripts.Finally,we demonstrate the technique's application using five datasets of varied lithologies from specialized literature,showcasing its versatility and effectiveness.
基金support of the Innovation Fund for College Teachers of Department Education of Gansu(No.2024A-021)Colleges and Universities Industrial Support Program Projects of Gansu Province(Grant No.2020C-20)+1 种基金Key Laboratory of Fluid and Power Machinery,Ministry of Education,Xihua University(Grant Nos.szjj2019-016,LTDL2020-007)Key Research and Development Program of Gansu Province-Industrial Project(No.25YFGA021).
文摘To investigate the impact of guide vane geometry—specifically,outlet angle,blade count,and radial height—on the performance of a Pump as Turbine(PAT),radial guide vanes were introduced upstream of the impeller in an IS80-50-315 low-specific-speed centrifugal PAT.Using an orthogonal test design,numerical simulations were conducted on 16 different PAT configurations,and the influence of vane geometry on performance was analyzed through a range analysis to determine the optimal parameter combinations.The results indicate that the number of guide vane blades significantly affects both the hydraulic efficiency and water head of the PAT under optimal operating conditions.Notably,the hydraulic efficiency of Configuration No.1(featuring five guide vane blades,a 6°outlet angle,and a 46 mm radial height)is 4.31%higher than that of Configuration No.13(with the same blade count but a 9°outlet angle and a 52 mm radial height).Additionally,Configuration No.1 exhibits lower turbulence kinetic energy dissipation and reduced blade loading.Furthermore,the study reveals that a smaller guide vane outlet angle and reduced radial height contribute to improved operational stability.
基金the National Natural Science Foundation of China(Grant Nos.52308403 and 52079068)the Yunlong Lake Laboratory of Deep Underground Science and Engineering(No.104023005)the China Postdoctoral Science Foundation(Grant No.2023M731998)for funding provided to this work.
文摘The uniaxial compressive strength(UCS)of rocks is a vital geomechanical parameter widely used for rock mass classification,stability analysis,and engineering design in rock engineering.Various UCS testing methods and apparatuses have been proposed over the past few decades.The objective of the present study is to summarize the status and development in theories,test apparatuses,data processing of the existing testing methods for UCS measurement.It starts with elaborating the theories of these test methods.Then the test apparatus and development trends for UCS measurement are summarized,followed by a discussion on rock specimens for test apparatus,and data processing methods.Next,the method selection for UCS measurement is recommended.It reveals that the rock failure mechanism in the UCS testing methods can be divided into compression-shear,compression-tension,composite failure mode,and no obvious failure mode.The trends of these apparatuses are towards automation,digitization,precision,and multi-modal test.Two size correction methods are commonly used.One is to develop empirical correlation between the measured indices and the specimen size.The other is to use a standard specimen to calculate the size correction factor.Three to five input parameters are commonly utilized in soft computation models to predict the UCS of rocks.The selection of the test methods for the UCS measurement can be carried out according to the testing scenario and the specimen size.The engineers can gain a comprehensive understanding of the UCS testing methods and its potential developments in various rock engineering endeavors.
文摘This paper introduces a kind of substitute bench testing method for vehicle application development and testing method of the test requirements,including battery fast conversion cycle test equipment,enter type incubator,liquid-cooled machine and ancillary equipment composed of a set of test system,through the walk-in constant temperature box to simulate the new energy vehicles under different environmental conditions of the test requirements,Liquid-cooled machine and auxiliary parts to complete the battery thermal management system need cooling fluid conditions,the battery conversion cycle test equipment to simulate the dc fast charging way of filling pile,complete battery thermal management system test,shorten the filling fast charging time and improve battery fast charge security,for troubleshooting and data collection and analysis,Improve work efficiency,save costs,and eliminate customer anxiety about battery life and charging time.
基金the National Key R&D Program of China(No.2023YFB3407003)the National Natural Science Foundation of China(No.52375378).
文摘An analytical model for contact area and contact stress considering the loading history in incremental sheet forming(ISF)was established.Then,by integrating with the directional characteristics of friction force and horizontal force in the process,a friction test method reflecting the forming characteristics of ISF was proposed.Friction coefficients during the forming processes of parts with different wall angles were measured under various plane curves,process paths,and lubrication conditions.Furthermore,the accuracy of the analytical model,as well as the measured friction coefficients and their variation trends,was verified through comparative analysis with experimental results,simulation data,and outcomes from other existing models.The results indicate that the influence of the plane curve characteristics and process paths of parts on the friction condition is not significant.Under the lubrication conditions of L-HM46 oil,MoS_(2)grease,graphite powder,and dry friction,the friction coefficient shows a gradually increasing trend.Notably,when the wall angle is≤40°,the friction coefficient remains relatively constant;however,when the wall angle exceeds 40°,the friction coefficient increases progressively.
基金supported by the National Natural Science Foundation of China(Grant Nos.U24A2088 and 42277174)the Fundamental Research Funds for the Central Universities,China(Grant No.2024JCCXSB01).
文摘During fully mechanized caving mining of thick coal seams,a large amount of strain energy accumulates in the roof,especially when the roof is thick and hard,making it difficultfor the roof to collapse naturally.When the roof eventually collapses,the accumulated energy is released instantaneously,exerting a strong impact on the roadway.To address this issue,we proposed the synergistic control method of directional comprehensive pressure relief and energy-absorbing support(PREA)for roadways with hard roofs.In this study,we developed a three-dimensional physical model test apparatus for roof cutting and pressure relief.The 122108 ventilation roadway at the Caojiatan Coal Mine,which has a thick and hard roof,was taken as the engineering example.We analyzed the evolution patterns of stress and displacement in both the stope and the roadway surrounding rocks under different schemes.The PREA reinforcement mechanism for the roadway was investigated through comparative model tests between the new and original methods.The results showed that,compared to the original method,the new method reduced surrounding rock stress by up to 60.4%,and the roadway convergence decreased by up to 52.1%.Based on these results,we proposed corresponding engineering recommendations,which can guide fieldreinforcement design and application.The results demonstrate that the PREA method effectively reduces stress and ensures the safety and stability of the roadway.
基金Hubei Provincial Medical Institutions at all levels of basic drugs and drug bridging support policy projectsResearch on the Integrated Development of Disease Prevention and Control and Medical Services in the XPCC under the Background of Healthy China (Grant No. BTJKJ2024003)。
文摘The purpose of this study is to evaluate the price and composition of blood glucose meters and blood glucose test papers in Hubei Province,so as to improve the affordability of blood glucose monitoring for diabetes patients.Using the standard survey method jointly developed by the World Health Organization(WHO)and Health Action International(HAI)for drug price composition analysis,central level data was collected through literature review,policy review,and interviews with key informants.Field research was conducted in Wuhan and Yichang to trace price data at various levels of the supply chain.At the central level,data shows that China has implemented multiple policies related to the management and pricing of blood glucose meters and test strips,but has not yet introduced price restrictions for blood glucose meters and test strips;At the supply chain level,data shows that the price composition of blood glucose meters and test strips in Hubei Province is mainly composed of manufacturer prices and retail markups,followed by supply chain taxes and wholesale markups.It can be seen from this that China has established a comprehensive medical device registration,sales,quality control and management standard system through a series of policies.At present,China has not issued price policies for blood glucose meters and blood glucose test papers.Therefore,we can reduce product prices by including medical insurance,government subsidies,competitive bidding,and reducing supply chain taxes,thus improving the affordability of blood glucose monitoring for diabetes patients.
基金Supported by Project of Forestry Science and Technology Plan of Guangdong Province(2005-15)~~
文摘Fuzzy analysis method for orthogonal test was used to study the effect of different sowing depth, seed soaking time, illumination intensity and culture soil on the seed germination rate of Eurya chinensis. The results showed that the effect of seed soaking time on the sowing and seedling of Eurya chinensis was the biggest, and the ethers were illumination intensity, sowing depth and culture soil. The germi- nation rate was the highest when composite soil was used as culture soil and seeds were soaked for 48 h and sowed in topsoil, and a layer of sunshade net was used.
基金Supported by Traditional Chinese Medicine Science and Technology Development Program of Shandong Province (2017-1982019-0400)Major Science and Technology Innovation Project of Shandong Province (2018CXGC1304)。
文摘[Objectives] This study was conducted to optimize the ethanol extraction technology of monoester alkaloids from Radix Aconiti Preparata. [Methods]On the basis of defined extraction times,ethanol concentration,ethanol times and extraction time were investigated by HPLC-MS combined with orthogonal test to optimize extraction process using the content of monoester alkaloids( the sum of benzoyl neoaconitine,benzoyl hypoaconitine and benzoyl aconitine) as an index.[Results]The optimum ethanol extraction technology was as follows: 75% ethanol,ethanol amount 25 times of the medicinal material,and each extraction for 1. 5 h.[Conclusions] The optimal extraction technology is simple,feasible,stable and reliable. It can provide reference for the industrial production and quality control of monoester alkaloids from Radix Aconiti Preparata.
基金supported by the National Natural Science Foundation of China(Project No.42307555).
文摘At present,there is currently a lack of unified standard methods for the determination of antimony content in groundwater in China.The precision and trueness of related detection technologies have not yet been systematically and quantitatively evaluated,which limits the effective implementation of environmental monitoring.In response to this key technical gap,this study aimed to establish a standardized method for determining antimony in groundwater using Hydride Generation–Atomic Fluorescence Spectrometry(HG-AFS).Ten laboratories participated in inter-laboratory collaborative tests,and the statistical analysis of the test data was carried out in strict accordance with the technical specifications of GB/T 6379.2—2004 and GB/T 6379.4—2006.The consistency and outliers of the data were tested by Mandel's h and k statistics,the Grubbs test and the Cochran test,and the outliers were removed to optimize the data,thereby significantly improving the reliability and accuracy.Based on the optimized data,parameters such as the repeatability limit(r),reproducibility limit(R),and method bias value(δ)were determined,and the trueness of the method was statistically evaluated.At the same time,precision-function relationships were established,and all results met the requirements.The results show that the lower the antimony content,the lower the repeatability limit(r)and reproducibility limit(R),indicating that the measurement error mainly originates from the detection limit of the method and instrument sensitivity.Therefore,improving the instrument sensitivity and reducing the detection limit are the keys to controlling the analytical error and improving precision.This study provides reliable data support and a solid technical foundation for the establishment and evaluation of standardized methods for the determination of antimony content in groundwater.
基金Supported by the Key Project from Department of Science and Technology of Heilongjiang Province(GA06B102-3-4)the Key Project from Heilongjiang Provincial Reclamation General Administration(HNKXIV-01-01-02)~~
文摘[Objective] This study was to screen the economic or stable PCR system of rice and detect the generality of the selected system in different molecular markers based on PCR.[Method] With DNA extracted from rice leaves by CTAB method as the template,PCR system was optimized by L16(45)orthogonal design.[Result] Clear bands were amplified from 16 different combinations,but the amplification effects and yields had difference.The most economic and applicable system was as follows:20 ng DNA template,150 μmol/L dNT...
基金The National Natural Science Foundation of China(No.51108081)
文摘In order to investigate the permanent deformation behavior of asphalt mixtures from discontinuity, the virtual rutting test of asphalt mixtures is developed by the discrete element method （DEM）. A digital specimen generation procedure considering aggregate gradation and irregular shape is developed based on the probability theory and the Monte Carlo method. The virtual rutting test is then conducted based on the generated digital specimen. In addition, on the basis of the time-temperature superposition （TTS） principle, a calculation method is used to reduce the computation time of the virtual rutting test. The simulation results are compared with the laboratory measurements. The results show that the calculation method based on the TFS principle in the discrete element （DE） viscoelastic model can significantly reduce the computation time. The deformation law of asphalt mixtures in the virtual rutting test is similar to the laboratory measurements, and the deformation and the dynamic stability of the virtual rutting test are slightly greater than the laboratory measurements. The two-dimensional virtual rutting test can predict the permanent deformation performance of asphalt mixtures.
文摘Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.
文摘Aim To improve the efficiency of fatigue material tests and relevant statistical treatment of test data. Methods\ Least square approach and other special treatments were used. Results and Conclusion\ The concepts of each phase in fatigue tests and statistical treatment are clarified. The method proposed leads to three important properties. Reduced number of specimens brings to the advantage of lowering test expenditures. The whole test procedure has more flexibility for there is no need to conduct many tests at the same stress level as in traditional cases.
文摘In order to find the test cube for industrial robots as specified by ISO 9283, a seed cube is grown up in an irregular working space of the robot, provided that the corners of the cube do not exceed the boundary of the working space. All possible cubes are searched, and the cube with the maximum volume is selected. The calculation examples show that the method of growth can be used for a variety of industrial robots. The method of growth can determine the test cube and test points of irregular working space according to ISO 9283, and can avoid blindness and randomness in the selection of test points.
基金Supported by Traditional Chinese Medicine and Ethnic Minority Medicine Technology Research Subject of Guizhou Administrative Bureau(QZYY2013-70,QZYY-2014-026)Joint Application of Basic Research Fund of Science and Technology Department o Yunnan Province-Guiyang University of Chinese Medicine(QKHLHZ[2014]7323)~~
文摘[Objective] This study was conducted to establish a microbial limit test method for Bupi Qiangli Ointment. [Method] The conventional method and medium dilution method were used for bacterial, mold and yeast counting in sample recovery test. [Result] The medium dilution method （1：10 test solution, 0.5 ml/plate） could effectively eliminate the inhibition effect of the Bupi Qiangli Ointment, and the recovery of Staphylococcus aureus was greater than 70% in the 3 batches of samples; and the conventional method exhibited the recoveries of E. coil, Bacillus subtilis, Candida albicans and Aspergillus greater than 70% in the 3 batches of samples. [Conclusion] Due to Bupi Qiangli Ointment has strongly antibacterial effect on Staphylococcus au- reus, the medium dilution method was used for bacterial counting, and the conventional method was used for mold and yeast counting; and the conventional method was used for controlled bacterium examination of E. coll.
文摘A new statistical method, the fuzzy analytical method, was introduced in the optimization processes of liposome preparation. It took the full advantage of the information from orthogonal experiments to obtain the optimal liposome preparation conditions by considering all the evaluation indexes. Liposomes were made by the modified reverse-phase evaporation method and the properties of liposomes including size, encapsulation efficiency and physical stability were selected as the evaluation indexes to indicate the quality of liposomes. The experimental data of these properties were analyzed by three different methods including direct observation, variance analysis and fuzzy analytical method. The optimal preparation conditions obtained from these methods were validated with further experiments. The results of all possible combinations of levels for all factors in orthogonal experiments were acquired by the fuzzy analytical method. All evaluation indexes were taken into account and the optimal preparation condition was obtained. The optimal preparation conditions from direct observation and fuzzy analytical method were different and further validation studies indicated that the optimal conditions obtained from the fuzzy analytical method were in agreement with that from traditional statistical analysis. Fuzzy analytical method avoided the problem resulted from the traditional method, in which different levels of the same factor were obtained when considering different evaluation indexes. More information could be obtained from the fuzzy analytical method and the blind area within the experimental range was eliminated. As a result, fuzzy analytical method can be applied in the optimization processes of liposome preparation.
