Aluminum nitride （AIN） nanowires, serrated nanoribbons, and nanoribbons were selectively obtained through a simple chloride assisted chemical vapor deposition process. The morphologies of the products could be contr...Aluminum nitride （AIN） nanowires, serrated nanoribbons, and nanoribbons were selectively obtained through a simple chloride assisted chemical vapor deposition process. The morphologies of the products could be controlled by adjusting the deposition position and the flux of the reactant gas. The morphologies and structures of the AIN products were investigated in detail. The formation mechanism of the as-prepared different morphologies of AIN one-dimensional （ID） nanostructures was discussed on the basis of the experimental results.展开更多
In recent years,one-dimensional(1D)nanomaterials have raised researcher's interest because of their unique structur-al characteristic to generate and confine the optical signal and their promising prospects in pho...In recent years,one-dimensional(1D)nanomaterials have raised researcher's interest because of their unique structur-al characteristic to generate and confine the optical signal and their promising prospects in photonic applications.In this re-view,we summarized the recent research advances on the spectroscopy and carrier dynamics of 1D nanostructures.First,the condensation and propagation of exciton-polaritons in nanowires(NWs)are introduced.Second,we discussed the properties of 1D photonic crystal(PC)and applications in photonic-plasmonic structures.Third,the observation of topological edge states in 1D topological structures is introduced.Finally,the perspective on the potential opportunities and remaining chal-lenges of 1D nanomaterials is proposed.展开更多
Low-toxicity single crystal Sn S nanowires had been successfully synthesized by the catalystassistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using Sn S powder and...Low-toxicity single crystal Sn S nanowires had been successfully synthesized by the catalystassistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using Sn S powder and S powder as forerunners. The structure, morphology and optical properties of the prepared Sn S nanowires were characterized. The experimental results show the as-synthesized nanowires are single crystalline with a preferential orientation. The synthesized Sn S nanowires show strong absorption in the visible and nearinfrared spectral region, and the direct energy band gap of Sn S nanowires is 1.46 e V.展开更多
Catalysts play decisive roles in determining the energy conversion efficiencies of energy devices.Up to now,various types of nanostructured materials have been studied as advanced electrocatalysts.This review highligh...Catalysts play decisive roles in determining the energy conversion efficiencies of energy devices.Up to now,various types of nanostructured materials have been studied as advanced electrocatalysts.This review highlights the application of one‐dimensional(1D)metal electrocatalysts in energy conversion,focusing on two important reaction systems-direct methanol fuel cells and water splitting.In this review,we first give a broad introduction of electrochemical energy conversion.In the second section,we summarize the recent significant advances in the area of 1D metal nanostructured electrocatalysts for the electrochemical reactions involved in fuel cells and water splitting systems,including the oxygen reduction reaction,methanol oxidation reaction,hydrogen evolution reaction,and oxygen evolution reaction.Finally,based on the current studies on 1D nanostructures for energy electrocatalysis,we present a brief outlook on the research trend in 1D nanoelectrocatalysts for the two clean electrochemical energy conversion systems mentioned above.展开更多
One-dimensional(1D)Pt-based electrocatalysts demonstrate outstanding catalytic activities and stability toward the oxygen reduction reaction(ORR).Advances in three-dimensional(3D)ordered electrodes based on 1D Pt-base...One-dimensional(1D)Pt-based electrocatalysts demonstrate outstanding catalytic activities and stability toward the oxygen reduction reaction(ORR).Advances in three-dimensional(3D)ordered electrodes based on 1D Pt-based nanostructure arrays have revealed great potential for developing highperformance proton exchange membrane fuel cells(PEMFCs),in particular for addressing the mass transfer and durability challenges of Pt/C nanoparticle electrodes.This paper reviews recent progress in the field,with a focus on the 3D ordered electrodes based on self-standing Pt nanowire arrays.Nanostructured thin-film(NSTF)catalysts are discussed along with electrodes made from Pt-based nanoparticles deposited on arrays of polymer nanowires,and carbon and TiO2 nanotubes.Achievements on electrodes from Pt-based nanotube arrays are also reviewed.The importance of size,surface properties,and the distribution control of 1D catalyst nanostructures is indicated.Finally,challenges and future development opportunities are addressed regarding increasing electrochemical surface area(ECSA)and quantifying oxygen mass transport resistance for 1D nanostructure array electrodes.展开更多
This review discusses the recent reports on one-dimensional(1D) nanostructures with unusual flexibility.We discuss the importance that flexibility could have in future applications of nanowires and other nanostructure...This review discusses the recent reports on one-dimensional(1D) nanostructures with unusual flexibility.We discuss the importance that flexibility could have in future applications of nanowires and other nanostructures,and detail the two main approaches that have been followed to this day to synthesize highly flexible 1D nanostructures.One approach is based on making crystals in which one or two dimensions of the structure are comparable in size with the unit cell.Such thinness has been shown to provide unusual flexibility.The other approach conjoins hard nanostructures with flexible joints.展开更多
Searching for one-dimensional(1D)nanostructure with ferromagnetic(FM)half-metallicity is of significance for the development of miniature spintronic devices.Here,based on the first-principles calculations,we propose t...Searching for one-dimensional(1D)nanostructure with ferromagnetic(FM)half-metallicity is of significance for the development of miniature spintronic devices.Here,based on the first-principles calculations,we propose that the 1D CrN nanostructure is a FM half-metal,which can generate the fully spin-polarized current.The ab initio molecular dynamic simulation and the phonon spectrum calculation demonstrate that the 1D CrN nanostructure is thermodynamically stable.The partially occupied Cr-d orbitals endow the nanostructure with FM half-metallicity,in which the half-metallic gap(?s)reaches up to 1.58 eV.The ferromagnetism in the nanostructure is attributed to the superexchange interaction between the magnetic Cr atoms,and a sizable magnetocrystalline anisotropy energy(MAE)is obtained.Moreover,the transverse stretching of nanostructure can effectively modulate?s and MAE,accompanied by the preservation of half-metallicity.A nanocable is designed by encapsulating the CrN nanostructure with a BN nanotube,and the intriguing magnetic and electronic properties of the nanostructure are retained.These novel characteristics render the 1D CrN nanostructure as a compelling candidate for exploiting high-performance spintronic devices.展开更多
The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters we...The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.展开更多
One-dimensional （1D） nanomaterials and nanostructures have received much attention due to their potential interest for understanding fundamental physical concepts and for applications in constructing nanoscale elect...One-dimensional （1D） nanomaterials and nanostructures have received much attention due to their potential interest for understanding fundamental physical concepts and for applications in constructing nanoscale electric and optoelectronic devices. Zinc sulfide （ZnS） is an important semiconductor compound of Ⅱ-Ⅵ group, and the synthesis of 1D ZnS nanomaterials and nanostructures has been of growing interest owing to their promising application in nanoscale optoelectronic devices. This paper reviews the recent progress on 1D ZnS nanomaterials and nanostructures, including nanowires, nanowire arrays, nanorods, nanobelts or nanoribbons, nanocables, and hierarchical nanostructures etc. This article begins with a survey of various methods that have been developed for generating 1D nanomaterials and nanostructures, and then mainly focuses on structures, synthesis, characterization, formation mechanisms and optical property tuning, and luminescence mechanisms of 1D ZnS nanomaterials and nanostructures. Finally, this review concludes with personal views towards future research on 1D ZnS nanomaterials and nanostructures.展开更多
The synthesis of one-dimensional （1D） semiconductor nanostructures has been studied intensively for a wide range of materials due to their unique structural and physical properties and promising potential for future...The synthesis of one-dimensional （1D） semiconductor nanostructures has been studied intensively for a wide range of materials due to their unique structural and physical properties and promising potential for future technological applications. Among various strategies for synthesizing 1D semiconductor nanostructures, solution-phase synthetic routes are advantageous in terms of cost, throughput, modulation of composition, and the potential for large-scale and environmentally benign production. This article gives a concise review on the recent developments in the solution-phase synthesis of ID semiconductor nanostructures of different compositions, sizes, shapes, and architectures. We first introduce several typical solution-phase synthetic routes based on controlled precipitation from homogeneous solutions, including hydrothermal/solvothermal process, solution-liquid-solid （SLS） process, high-temperature organic-solution process, and low-temperature aqueous-solution process. Subsequently, we discuss two solution-phase synthetic strategies involving solid tem- plates or substrates, such as the chemical transformation of 1D sacrificial templates and the oriented growth of 1D nanostructure arrays on solid substrates. Finally, prospects of the solution-phase approaches to 1D semiconductor nanostructures will be briefly discussed.展开更多
In this review, the progress made during the last two years with respect to the syntheses and novel properties of one-dimensional （1D） ZnS nanostructures is presented. Primarily the research on 1D ZnS nanostructures...In this review, the progress made during the last two years with respect to the syntheses and novel properties of one-dimensional （1D） ZnS nanostructures is presented. Primarily the research on 1D ZnS nanostructures has been of growing interest owing to their promising applications in nanoscale optoelectronic devices. Diverse 1D ZnS nanostructures with delicately-tuned morphologies, sizes, and microstructures have been synthesized through relatively simple and well-controlled techniques. Some novel properties of the nanomaterials have been explored and the relationships between their structural features and functions have been understood gradually.展开更多
Uniform ZnO toothed-nanobelts and nanocombs were fabricated respectively through pure zinc powder evaporation without catalyst at temperature of 600-650℃. Scanning electron microscopy （SEM） and high-resolution tran...Uniform ZnO toothed-nanobelts and nanocombs were fabricated respectively through pure zinc powder evaporation without catalyst at temperature of 600-650℃. Scanning electron microscopy （SEM） and high-resolution transmission electron microscopy （HRTEM） observations show that such ZnO nanostructures have several types in morphology, and all of them are single crystalline. The experimental results reveal that the growth of the ZnO nanostructures was controlled by vapor-solid mechanism. Room temperature photoluminescence spectra of the toothed-nanobelts show a UV emission at - 390 nm and a broad green emission with 4 subordinate peaks at 455-495 nm.展开更多
Semiconductor nanowires, with their unique capability to bridge the nanoscopic and macroscopic worlds, have been demonstrated to have potential applications in energy conversion, electronics, optoelectronics, and bios...Semiconductor nanowires, with their unique capability to bridge the nanoscopic and macroscopic worlds, have been demonstrated to have potential applications in energy conversion, electronics, optoelectronics, and biosensing devices. Onedimensional（1D） ZnO nanostructures, with coupled semiconducting and piezoelectric properties, have been extensively investigated and widely used to fabricate nanoscale optoelectronic devices. In this article, we review recent developments in 1D ZnO nanostructure based photodetectors and device performance enhancement by strain engineering piezoelectric polarization and interface modulation. The emphasis is on a fundamental understanding of electrical and optical phenomena, interfacial and contact behaviors, and device characteristics. Finally, the prospects of 1D ZnO nanostructure devices and new challenges are proposed.展开更多
The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs)...The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.展开更多
The optical waveguide behaviors of CdS and CdSxSe1?x nanostructures are studied using near-field optical microscopy. Optical measurements demonstrate that light may be guided on sub-wavelength scales along CdS nanorib...The optical waveguide behaviors of CdS and CdSxSe1?x nanostructures are studied using near-field optical microscopy. Optical measurements demonstrate that light may be guided on sub-wavelength scales along CdS nanoribbons in straight or bent structures. The photoluminescence (PL) spectra from nanoribbon emission using scanning near-field optical microscopy are analyzed under different incident laser intensities. The PL spectra along Se-doped and undoped CdS nanoribbons at different propagation distances are investigated. Both the guided PL spectra of Se-doped and undoped CdS nanoribbons show red-shifts because of the band-edge absorption. Our results are useful for the development of new kinds of functional nano devices.展开更多
A facile method is reported to controllably fabricate one dimensional （1D） polymer nan,astructures via metallogel template polymerization. The metallogel was prepared through coordination interactions between silver...A facile method is reported to controllably fabricate one dimensional （1D） polymer nan,astructures via metallogel template polymerization. The metallogel was prepared through coordination interactions between silver ions and a ligand （L） bearing three pyridyl groups in tetrahydrofuran （THF）. The diameters of the metallogel nanofibers could be tuned by the gel concentration （GC）. Due to its high thermal stability and facility of removal, the metallogel was used as the template for radical polymerization of diacryolyl-2,6-diaminopyridine （DADAP） to form poly-diacryolyl-2,6-diaminopyridine （PDADAP） nanostructures. The gradually eroding of the templates by PDADAP provided us an effective way to fabricate various nanostructures of the polymer. We have demonstrated that different 1D nanostructures, including n^noribbons, nanotubes and nanowires, could be selectively fabricated by adjusting polymerization time, monomer concentration and GC. The rheological properties of the gel samples were tested by a rheometer. As prolonging the reaction time, more and more polymers were formed and the strength of the resulting polymer gels became higher and higher. The simple preparation process, easy controlled microstructures and adequate gel strength would make it a facile synthetic method for different 1D polymer nanosturctures.展开更多
Rolling contact fatigue performance is among the most important issues for applications of bearing steels.In this work,a recently developed surface modification technique,surface mechanical rolling treatment,was appli...Rolling contact fatigue performance is among the most important issues for applications of bearing steels.In this work,a recently developed surface modification technique,surface mechanical rolling treatment,was applied on a rare-earth addition bearing steel.And rolling contact fatigue behavior of treated samples was compared with that of as-received counterparts at different contacting stresses.The results demonstrated that a 700μm-thick gradient nanostructured surface layer is produced on samples by surface mechanical rolling treatment.The grain size decreases while the microhardness increases gradually with decreasing depth,reaching~23 nm and~10.2 GPa,respectively,at the top surface.Consequently,the rolling contact fatigue property is significantly enhanced.The characteristic life of treated samples is~3.2 times that of untreated counterparts according to Weibull curves at 5.6 GPa.Analyses of fatigue mechanisms demonstrated that the gradient nanostructured surface layer might not only retard material degradation and microcrack formation,but also prolong the steady-state elastic response stage under rolling contact fatigue.展开更多
In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are c...In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are closely related to the hydrogen bonds(H-bonds)network between water molecules.Therefore,it is crucial to analyze the relationship between these two aspects.In this paper,the infrared spectrum and motion characteristics of the stretching vibrations of the O-H bonds in one-dimensional confined water(1DCW)and bulk water(BW)in(6,6)single-walled carbon nanotubes(SWNT)are studied by molecular dynamics simulations.The results show that the stretching vibrations of the two O-H bonds in 1DCW exhibit different frequencies in the infrared spectrum,while the O-H bonds in BW display two identical main frequency peaks.Further analysis using the spring oscillator model reveals that the difference in the stretching amplitude of the O-H bonds is the main factor causing the change in vibration frequency,where an increase in stretching amplitude leads to a decrease in spring stiffness and,consequently,a lower vibration frequency.A more in-depth study found that the interaction of H-bonds between water molecules is the fundamental cause of the increased stretching amplitude and decreased vibration frequency of the O-H bonds.Finally,by analyzing the motion trajectory of the H atoms,the dynamic differences between 1DCW and BW are clearly revealed.These findings provide a new perspective for understanding the behavior of water molecules at the nanoscale and are of significant importance in advancing the development of infrared spectroscopy detection technology.展开更多
High-pressure β-Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression.However,the mechanism and transit...High-pressure β-Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression.However,the mechanism and transition kinetics remain poorly understood.Here,we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β-Sn Ge under rapid decompression at different rates.High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures:an almost perfect st12 Ge crystal,nanosized bc8/r8 structures with amorphous boundaries,and amorphous Ge with nanosized clusters (0.8–2.5 nm).Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate,temperature,and stress.This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.展开更多
基金the National Natural Science Foundation of China under grant Nos.10674138 and 20571022.
文摘Aluminum nitride （AIN） nanowires, serrated nanoribbons, and nanoribbons were selectively obtained through a simple chloride assisted chemical vapor deposition process. The morphologies of the products could be controlled by adjusting the deposition position and the flux of the reactant gas. The morphologies and structures of the AIN products were investigated in detail. The formation mechanism of the as-prepared different morphologies of AIN one-dimensional （ID） nanostructures was discussed on the basis of the experimental results.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences(XDB36000000)National Natural Science Foundation of China(22073022,11874130,12074086,22173025)+3 种基金the Support by the DNL Cooperation Fund,CAS(DNL202016)China Postdoctoral Science Foundation(2022M710925)Beijing Municipal Natural Science Foundation(1222030)the CAS Instrument Development Project(No.Y950291).
文摘In recent years,one-dimensional(1D)nanomaterials have raised researcher's interest because of their unique structur-al characteristic to generate and confine the optical signal and their promising prospects in photonic applications.In this re-view,we summarized the recent research advances on the spectroscopy and carrier dynamics of 1D nanostructures.First,the condensation and propagation of exciton-polaritons in nanowires(NWs)are introduced.Second,we discussed the properties of 1D photonic crystal(PC)and applications in photonic-plasmonic structures.Third,the observation of topological edge states in 1D topological structures is introduced.Finally,the perspective on the potential opportunities and remaining chal-lenges of 1D nanomaterials is proposed.
基金partially supported by the National Science Foundation of China(No.50902117,No.11104126 and No.50825101)the Natural Science Foundation of Fujian Province of China(Grant No.2009J01263)+1 种基金the National Basic Research Program of China(No.2012CB933103)Scientific and Technological Innovation Platform of Fujian Province(2006L2003)
文摘Low-toxicity single crystal Sn S nanowires had been successfully synthesized by the catalystassistant chemical vapor deposition. Au nanoparticles were applied on the ITO surface as the catalysis, using Sn S powder and S powder as forerunners. The structure, morphology and optical properties of the prepared Sn S nanowires were characterized. The experimental results show the as-synthesized nanowires are single crystalline with a preferential orientation. The synthesized Sn S nanowires show strong absorption in the visible and nearinfrared spectral region, and the direct energy band gap of Sn S nanowires is 1.46 e V.
基金supported by the National Natural Science Foundation of China(21575134,21633008,21773224)National Key R&D Program of China(2016YFA0203200)K.C.Wong Education Foundation~~
文摘Catalysts play decisive roles in determining the energy conversion efficiencies of energy devices.Up to now,various types of nanostructured materials have been studied as advanced electrocatalysts.This review highlights the application of one‐dimensional(1D)metal electrocatalysts in energy conversion,focusing on two important reaction systems-direct methanol fuel cells and water splitting.In this review,we first give a broad introduction of electrochemical energy conversion.In the second section,we summarize the recent significant advances in the area of 1D metal nanostructured electrocatalysts for the electrochemical reactions involved in fuel cells and water splitting systems,including the oxygen reduction reaction,methanol oxidation reaction,hydrogen evolution reaction,and oxygen evolution reaction.Finally,based on the current studies on 1D nanostructures for energy electrocatalysis,we present a brief outlook on the research trend in 1D nanoelectrocatalysts for the two clean electrochemical energy conversion systems mentioned above.
基金The author would like to acknowledge the support from the Engineering and Physical Sciences Research Council(EPSRC)(EP/L015749/1).
文摘One-dimensional(1D)Pt-based electrocatalysts demonstrate outstanding catalytic activities and stability toward the oxygen reduction reaction(ORR).Advances in three-dimensional(3D)ordered electrodes based on 1D Pt-based nanostructure arrays have revealed great potential for developing highperformance proton exchange membrane fuel cells(PEMFCs),in particular for addressing the mass transfer and durability challenges of Pt/C nanoparticle electrodes.This paper reviews recent progress in the field,with a focus on the 3D ordered electrodes based on self-standing Pt nanowire arrays.Nanostructured thin-film(NSTF)catalysts are discussed along with electrodes made from Pt-based nanoparticles deposited on arrays of polymer nanowires,and carbon and TiO2 nanotubes.Achievements on electrodes from Pt-based nanotube arrays are also reviewed.The importance of size,surface properties,and the distribution control of 1D catalyst nanostructures is indicated.Finally,challenges and future development opportunities are addressed regarding increasing electrochemical surface area(ECSA)and quantifying oxygen mass transport resistance for 1D nanostructure array electrodes.
基金supported by Iowa State University of Science and Technology through startup funds
文摘This review discusses the recent reports on one-dimensional(1D) nanostructures with unusual flexibility.We discuss the importance that flexibility could have in future applications of nanowires and other nanostructures,and detail the two main approaches that have been followed to this day to synthesize highly flexible 1D nanostructures.One approach is based on making crystals in which one or two dimensions of the structure are comparable in size with the unit cell.Such thinness has been shown to provide unusual flexibility.The other approach conjoins hard nanostructures with flexible joints.
基金the National Natural Science Foundation of China(Grant Nos.12004137,62071200,and 12104236)Shandong Provincial Natural Science Foundation of China(Grant Nos.ZR2020QA052,ZR2020ZD28,ZR2021MA040,and ZR2021MA060).
文摘Searching for one-dimensional(1D)nanostructure with ferromagnetic(FM)half-metallicity is of significance for the development of miniature spintronic devices.Here,based on the first-principles calculations,we propose that the 1D CrN nanostructure is a FM half-metal,which can generate the fully spin-polarized current.The ab initio molecular dynamic simulation and the phonon spectrum calculation demonstrate that the 1D CrN nanostructure is thermodynamically stable.The partially occupied Cr-d orbitals endow the nanostructure with FM half-metallicity,in which the half-metallic gap(?s)reaches up to 1.58 eV.The ferromagnetism in the nanostructure is attributed to the superexchange interaction between the magnetic Cr atoms,and a sizable magnetocrystalline anisotropy energy(MAE)is obtained.Moreover,the transverse stretching of nanostructure can effectively modulate?s and MAE,accompanied by the preservation of half-metallicity.A nanocable is designed by encapsulating the CrN nanostructure with a BN nanotube,and the intriguing magnetic and electronic properties of the nanostructure are retained.These novel characteristics render the 1D CrN nanostructure as a compelling candidate for exploiting high-performance spintronic devices.
基金Project (2012CB932800) supported by the National Basic Research Program of ChinaProject (2012M521330) supported by China Postdoctoral Science Foundation
文摘The fabrication of a new type of one-dimensional Au-Ag porous nanotube（NPT） structure was presented based on a facile combination of nanocrystal growth and surface modification.Ag nanowires with various diameters were firstly served as the chemical plating templates via a polyol-process.Then,one-dimensional（1D） Au-Ag porous nanostructures with tailored structural features could be prepared by controlling the individual steps involved in this process,such as nanowire growth,surface modification,thermal diffusion,and dealloying.Structural characterizations reveal these Au-Ag porous nanotubes,non-porous nanotubes and porous nanowires possess novel nano-architectures with multimodal open porosity and excellent structural continuity and integrity,which make them particularly desirable as novel 1D nanocarriers for biomedical,drug delivery and sensing applications.
基金The authors acknowledge the support from the National Major Project of Fundamental Research:Nanomaterials and Nanostructures(Grant No.2005CB623603)the National Natural Science Foundation of China(Grant Nos.10304018,10574131)Special Fund for President Scholarship,Chinese Academy of Sciences.
文摘One-dimensional （1D） nanomaterials and nanostructures have received much attention due to their potential interest for understanding fundamental physical concepts and for applications in constructing nanoscale electric and optoelectronic devices. Zinc sulfide （ZnS） is an important semiconductor compound of Ⅱ-Ⅵ group, and the synthesis of 1D ZnS nanomaterials and nanostructures has been of growing interest owing to their promising application in nanoscale optoelectronic devices. This paper reviews the recent progress on 1D ZnS nanomaterials and nanostructures, including nanowires, nanowire arrays, nanorods, nanobelts or nanoribbons, nanocables, and hierarchical nanostructures etc. This article begins with a survey of various methods that have been developed for generating 1D nanomaterials and nanostructures, and then mainly focuses on structures, synthesis, characterization, formation mechanisms and optical property tuning, and luminescence mechanisms of 1D ZnS nanomaterials and nanostructures. Finally, this review concludes with personal views towards future research on 1D ZnS nanomaterials and nanostructures.
文摘The synthesis of one-dimensional （1D） semiconductor nanostructures has been studied intensively for a wide range of materials due to their unique structural and physical properties and promising potential for future technological applications. Among various strategies for synthesizing 1D semiconductor nanostructures, solution-phase synthetic routes are advantageous in terms of cost, throughput, modulation of composition, and the potential for large-scale and environmentally benign production. This article gives a concise review on the recent developments in the solution-phase synthesis of ID semiconductor nanostructures of different compositions, sizes, shapes, and architectures. We first introduce several typical solution-phase synthetic routes based on controlled precipitation from homogeneous solutions, including hydrothermal/solvothermal process, solution-liquid-solid （SLS） process, high-temperature organic-solution process, and low-temperature aqueous-solution process. Subsequently, we discuss two solution-phase synthetic strategies involving solid tem- plates or substrates, such as the chemical transformation of 1D sacrificial templates and the oriented growth of 1D nanostructure arrays on solid substrates. Finally, prospects of the solution-phase approaches to 1D semiconductor nanostructures will be briefly discussed.
基金World Premier International Research Center Initiative(WPI Initiative)on Materials Nanoarchitronics,MEXT,Japanthe Japan Society for the Promotion of Science (JSPS)for a support in the form of a fellowship tenable at the National Institute for Materials Science,Tsukuba,Japan.
文摘In this review, the progress made during the last two years with respect to the syntheses and novel properties of one-dimensional （1D） ZnS nanostructures is presented. Primarily the research on 1D ZnS nanostructures has been of growing interest owing to their promising applications in nanoscale optoelectronic devices. Diverse 1D ZnS nanostructures with delicately-tuned morphologies, sizes, and microstructures have been synthesized through relatively simple and well-controlled techniques. Some novel properties of the nanomaterials have been explored and the relationships between their structural features and functions have been understood gradually.
基金Funded by the National Science Fund for Distinguished Young Scholars (No.50325209) ,the National Natural Science Foundationof China ( No.50232030) , the Science and Technology Fund ofMinistry of Education of China (104022) andthe Fundfor ReturnedOverseas Scholar of Ministry of Education of China (01-498)
文摘Uniform ZnO toothed-nanobelts and nanocombs were fabricated respectively through pure zinc powder evaporation without catalyst at temperature of 600-650℃. Scanning electron microscopy （SEM） and high-resolution transmission electron microscopy （HRTEM） observations show that such ZnO nanostructures have several types in morphology, and all of them are single crystalline. The experimental results reveal that the growth of the ZnO nanostructures was controlled by vapor-solid mechanism. Room temperature photoluminescence spectra of the toothed-nanobelts show a UV emission at - 390 nm and a broad green emission with 4 subordinate peaks at 455-495 nm.
基金Project supported by the National Major Research Program of China(Grant No.2013CB932602)the National Key Research and Development Program of China(Grant No.2016YFA0202701)+6 种基金the Program of Introducing Talents of Discipline to Universities,China(Grant No.B14003)the National Natural Science Foundation of China(Grant Nos.51527802,51232001,51602020,51672026,and 51372020)China Postdoctoral Science Foundation(Grant Nos.2015M580981 and 2016T90033)Beijing Municipal Science&Technology Commission,Chinathe State Key Laboratory for Advanced Metals and Materials,China(Grant No.2016Z-06)the Fundamental Research Funds for the Central Universities,ChinaJST in Japan,Research and Education Consortium for Innovation of Advanced Integrated Science
文摘Semiconductor nanowires, with their unique capability to bridge the nanoscopic and macroscopic worlds, have been demonstrated to have potential applications in energy conversion, electronics, optoelectronics, and biosensing devices. Onedimensional（1D） ZnO nanostructures, with coupled semiconducting and piezoelectric properties, have been extensively investigated and widely used to fabricate nanoscale optoelectronic devices. In this article, we review recent developments in 1D ZnO nanostructure based photodetectors and device performance enhancement by strain engineering piezoelectric polarization and interface modulation. The emphasis is on a fundamental understanding of electrical and optical phenomena, interfacial and contact behaviors, and device characteristics. Finally, the prospects of 1D ZnO nanostructure devices and new challenges are proposed.
基金supported by the National Natural Science Foundation of China(61904166,22209145)the Natural Science Foundation of Sichuan Province(2022NSFSC0258)the Fundamental Research Funds for the Central Universities(YJ2021129)。
文摘The unique advantages of one-dimensional(1D)oriented nanostructures in light-trapping and chargetransport make them competitive candidates in photovoltaic(PV)devices.Since the emergence of perovskite solar cells(PSCs),1D nanostructured electron transport materials(ETMs)have drawn tremendous interest.However,the power conversion efficiencies(PCEs)of these devices have always significantly lagged behind their mesoscopic and planar counterparts.High-efficiency PSCs with 1D ETMs showing efficiency over 22%were just realized in the most recent studies.It yet lacks a comprehensive review covering the development of 1D ETMs and their application in PSCs.We hence timely summarize the advances in 1D ETMs-based solar cells,emphasizing on the fundamental and optimization issues of charge separation and collection ability,and their influence on PV performance.After sketching the classification and requirements for high-efficiency 1D nanostructured solar cells,we highlight the applicability of 1D TiO_(2)nanostructures in PSCs,including nanotubes,nanorods,nanocones,and nanopyramids,and carefully analyze how the electrostatic field affects cell performance.Other kinds of oriented nanostructures,e.g.,ZnO and SnO_(2)ETMs,are also described.Finally,we discuss the challenges and propose some potential strategies to further boost device performance.This review provides a broad range of valuable work in this fast-developing field,which we hope will stimulate research enthusiasm to push PSCs to an unprecedented level.
基金Supported by the National Natural Science Foundation of China (Grant Nos.10574002,90406007,and 50602015)the National Basic Research Program of China (Grant No.2007CB936800)
文摘The optical waveguide behaviors of CdS and CdSxSe1?x nanostructures are studied using near-field optical microscopy. Optical measurements demonstrate that light may be guided on sub-wavelength scales along CdS nanoribbons in straight or bent structures. The photoluminescence (PL) spectra from nanoribbon emission using scanning near-field optical microscopy are analyzed under different incident laser intensities. The PL spectra along Se-doped and undoped CdS nanoribbons at different propagation distances are investigated. Both the guided PL spectra of Se-doped and undoped CdS nanoribbons show red-shifts because of the band-edge absorption. Our results are useful for the development of new kinds of functional nano devices.
基金financially supported by the National Natural Science Foundation of China(Nos.20874055 and 21174079)Hi-tech Research and Development Program(863 plan) of China(No.2009AA062903)
文摘A facile method is reported to controllably fabricate one dimensional （1D） polymer nan,astructures via metallogel template polymerization. The metallogel was prepared through coordination interactions between silver ions and a ligand （L） bearing three pyridyl groups in tetrahydrofuran （THF）. The diameters of the metallogel nanofibers could be tuned by the gel concentration （GC）. Due to its high thermal stability and facility of removal, the metallogel was used as the template for radical polymerization of diacryolyl-2,6-diaminopyridine （DADAP） to form poly-diacryolyl-2,6-diaminopyridine （PDADAP） nanostructures. The gradually eroding of the templates by PDADAP provided us an effective way to fabricate various nanostructures of the polymer. We have demonstrated that different 1D nanostructures, including n^noribbons, nanotubes and nanowires, could be selectively fabricated by adjusting polymerization time, monomer concentration and GC. The rheological properties of the gel samples were tested by a rheometer. As prolonging the reaction time, more and more polymers were formed and the strength of the resulting polymer gels became higher and higher. The simple preparation process, easy controlled microstructures and adequate gel strength would make it a facile synthetic method for different 1D polymer nanosturctures.
基金The financial supports by the Chinese Academy of Sciences(Nos.XDC04030300 and XDB0510303)CAS-HK Joint Laboratory of Nanomaterials and MechanicsShenyang National Laboratory for Materials Science are acknowledged.
文摘Rolling contact fatigue performance is among the most important issues for applications of bearing steels.In this work,a recently developed surface modification technique,surface mechanical rolling treatment,was applied on a rare-earth addition bearing steel.And rolling contact fatigue behavior of treated samples was compared with that of as-received counterparts at different contacting stresses.The results demonstrated that a 700μm-thick gradient nanostructured surface layer is produced on samples by surface mechanical rolling treatment.The grain size decreases while the microhardness increases gradually with decreasing depth,reaching~23 nm and~10.2 GPa,respectively,at the top surface.Consequently,the rolling contact fatigue property is significantly enhanced.The characteristic life of treated samples is~3.2 times that of untreated counterparts according to Weibull curves at 5.6 GPa.Analyses of fatigue mechanisms demonstrated that the gradient nanostructured surface layer might not only retard material degradation and microcrack formation,but also prolong the steady-state elastic response stage under rolling contact fatigue.
基金Supported by the Natural Science Foundation of China(51705326,52075339)。
文摘In sub nanometer carbon nanotubes,water exhibits unique dynamic characteristics,and in the high-frequency region of the infrared spectrum,where the stretching vibrations of the internal oxygen-hydrogen(O-H)bonds are closely related to the hydrogen bonds(H-bonds)network between water molecules.Therefore,it is crucial to analyze the relationship between these two aspects.In this paper,the infrared spectrum and motion characteristics of the stretching vibrations of the O-H bonds in one-dimensional confined water(1DCW)and bulk water(BW)in(6,6)single-walled carbon nanotubes(SWNT)are studied by molecular dynamics simulations.The results show that the stretching vibrations of the two O-H bonds in 1DCW exhibit different frequencies in the infrared spectrum,while the O-H bonds in BW display two identical main frequency peaks.Further analysis using the spring oscillator model reveals that the difference in the stretching amplitude of the O-H bonds is the main factor causing the change in vibration frequency,where an increase in stretching amplitude leads to a decrease in spring stiffness and,consequently,a lower vibration frequency.A more in-depth study found that the interaction of H-bonds between water molecules is the fundamental cause of the increased stretching amplitude and decreased vibration frequency of the O-H bonds.Finally,by analyzing the motion trajectory of the H atoms,the dynamic differences between 1DCW and BW are clearly revealed.These findings provide a new perspective for understanding the behavior of water molecules at the nanoscale and are of significant importance in advancing the development of infrared spectroscopy detection technology.
基金supported by the National Nature Science Foundation of China(NSFC)(Grant No.11974033)Xuqiang Liu acknowledges support from the National Postdoctoral Foundation Project of China under Grant No.GZC20230215+2 种基金the National Nature Science Foundation of China under Grants No.12404001The XRD measurements at room and high temperatures were performed at the 4W2 HPStation of the Beijing Synchrotron Radiation Facility(BSRF)and beamline 15U1 of the Shanghai Synchrotron Radiation Facility(SSRF)In situ high-pressure,low-temperature XRD measurements were conducted at sector 16 ID-B,HPCAT of the Advanced Photon Source,and were supported by DOE-NNSA under Award No.DE-NA0001974.
文摘High-pressure β-Sn germanium may transform into diverse metastable allotropes with distinctive nanostructures and unique physical properties via multiple pathways under decompression.However,the mechanism and transition kinetics remain poorly understood.Here,we investigate the formation of metastable phases and nanostructures in germanium via controllable transition pathways of β-Sn Ge under rapid decompression at different rates.High-resolution transmission electron microscopy reveals three distinct metastable phases with the distinctive nanostructures:an almost perfect st12 Ge crystal,nanosized bc8/r8 structures with amorphous boundaries,and amorphous Ge with nanosized clusters (0.8–2.5 nm).Fast in situ x-ray diffraction and x-ray absorption measurements indicate that these nanostructured products form in certain pressure regions via distinct kinetic pathways and are strongly correlated with nucleation rates and electronic transitions mediated by compression rate,temperature,and stress.This work provides deep insight into the controllable synthesis of metastable materials with unique crystal symmetries and nanostructures for potential applications.
