Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the ...Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.展开更多
The northern segment of the North-South Seismic Belt is characterized by intense crustal deformation,well-developed active tectonics,and frequent occurrences of strong earthquakes.Therefore,conducting a Probabilistic ...The northern segment of the North-South Seismic Belt is characterized by intense crustal deformation,well-developed active tectonics,and frequent occurrences of strong earthquakes.Therefore,conducting a Probabilistic Seismic Hazard Analysis(PSHA)for this region is of significant importance for supporting seismic fortification in major engineering projects and formulating disaster prevention and mitigation policies.In this study,a composite seismic source model was constructed by integrating data on historical earthquakes,active faults,and paleoseismicity.Furthermore,a logic tree framework was employed to quantify epistemic uncertainties,enabling a systematic seismic hazard assessment of the region.To more accurately characterize the spatial heterogeneity of seismic activity,improvements were made to both the Circular Spatial Smoothing Model(CSSM)with a fixed radius and the Adaptive Spatial Smoothing Model(ASSM),with full consideration given to the spatiotemporal completeness of historical earthquake magnitudes.Regarding the CSSM,for scenarios involving small sample sizes in earthquake catalogs,the cross-validation method proposed in this study demonstrated higher robustness than the maximum likelihood method in determining the optimal correlation distance.Performance evaluation results indicate that while both models effectively characterize seismic activity,the ASSM exhibits superior overall predictive performance compared to the CSSM,owing to its ability to adaptively adjust the smoothing radius according to seismic density.Significant discrepancies were observed in the Peak Ground Acceleration(PGA)results calculated with a 10%probability of exceedance in 50 years across different combinations of seismic source models.The single spatially smoothed point-source model yielded a maximum PGA of approximately 0.52 g,with high-value areas concentrated near historical epicenters,thereby significantly underestimating the hazard associated with major fault zones.When combined with the simple fault-source model,the maximum PGA increased to 0.8 g,with high-value zones exhibiting a zonal distribution along faults;however,the risk remained underestimated for faults with low slip rates that are nevertheless approaching their recurrence cycles.Following the introduction of the time-dependent characteristic fault-source model,local PGA values for faults in the middle-to-late stages of their recurrence cycles increased by a factor of 2 to 7 compared to the single model.These results demonstrate that the characteristic fault-source model reasonably delineates the time-dependence of large earthquake recurrence,thereby providing a more accurate assessment of imminent seismic risks.By comprehensively applying the improved spatially smoothed pointsource model,the simple fault-source model,and the characteristic fault-source model,the following faults within the region were identified as having high seismic hazard:the Huangxianggou,Zhangxian,and Tianshui segments of the Xiqinling northern edge fault;the Maqin-Maqu segment of the Dongkunlun fault;the Longriqu fault;the Maoergai fault;the Elashan fault;the Riyueshan fault;the eastern segment of the Lenglongling fault;the Maxianshan segment of the Maxianshan northern Margin fault;and the Maomaoshan-Jinqianghe segment of the Laohushan-Maomaoshan fault.As these faults are located within seismic gaps or are approaching the recurrence periods of large earthquakes,they should be prioritized for current and future seismic monitoring as well as disaster prevention and mitigation efforts.展开更多
We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers...We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.展开更多
39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.Ar...39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.ArcGIS inverse distance weight difference method was used to analyze the characteristics of pollution distribution,and single-factor pollution index,Nemerow comprehensive pollution index,ground accumulation index,and potential ecological risk index were selected to evaluate the characteristics of heavy metal pollution.Based on correlation analysis,the absolute principal component-multiple linear regression(APCS-MLR)and positive definite matrix factorization(PMF)models were used to analyze the sources of soil heavy metals.The results showed that the average concentrations of all eight heavy metals exceeded both national and Guangxi soil background values.Hg,Cd,and Zn exhibited high variation(greater than 0.5),indicating significant external disturbances,and their spatial distribution was closely related to mining activity locations.The single-factor pollution index evaluation indicated varying degrees of pollution risk for Cd,Zn,and As,with Cd and Zn being the most severe pollutants,as 69.23%and 30.77%of the samples fell into the moderate pollution or higher category.The geoaccumulation index analysis ranked the mean pollution levels of the eight elements as follows:Zn>Cd>Ni>Pb>Cu>Cr>Hg>As,with Cd and Zn showing the most severe contamination,and 51.28%of the samples exhibiting moderate or higher pollution levels.The Nemerow comprehensive pollution index evaluation showed that 74.35%of soil samples were classified as moderate to heavy pollution.The potential ecological risk index assessment indicated significant ecological risks posed by Cd and Zn,with 82.05%and 5.12%of the samples classified as causing strong to extreme ecological risks,respectively.The source apportionment analysis revealed minor differences between the two models.The APCS-MLR model identified three pollution sources and their contribution rates:anthropogenic mining sources(31.13%),parent material sources(40.38%),and unidentified sources(28.49%).The PMF model identified three pollution sources with contribution rates of anthropogenic mining sources(26.10%),parent material sources(46.96%),and a combined traffic and agricultural source(26.61%).Pb,Hg,Cd,and Zn mainly originated from mining activities;Cr,As,and Ni were primarily derived from the parent material,while Cu was predominantly attributed to traffic and agricultural sources.These findings provide a scientific basis for the prevention and control of heavy metal pollution in mining areas.展开更多
The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.Howeve...The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.However,the inversion for the ES model suffers from nonuniqueness and instability,which remain unresolved.To mitigate these issues,we introduce both the minimum and flattest models into the model objective function as an alternative regularization approach in the spherical ES method.We first present the methods,then analyze the accuracy of forward calculation and test the proposed ES method in this study by using synthetic data.The experimental results from simulation data indicate that our proposed regularization effectively suppresses the Backus effect and mitigates inversion instability in the low-latitude region.Finally,we apply the proposed method to magnetic anomaly data from China Seismo-Electromagnetic Satellite-1(CSES-1)and Macao Science Satellite-1(MSS-1)magnetic measurements over Africa by constructing an ES model of the large-scale lithospheric magnetic field.Compared with existing global lithospheric magnetic field models,our ES model demonstrates good consistency at high altitudes and predicts more stable fields at low altitudes.Furthermore,we derive the reduction to the pole(RTP)magnetic anomaly fields and the apparent susceptibility contrast distribution based on the ES model.The latter correlates well with the regional tectonic framework in Africa and surroundings.展开更多
Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions...Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions,and modeling of the source rocks in the second member of the Eocene Wenchang Formation(Wen 2 Member)in the Northern Shunde Subsag at the southwestern margin of the Pearl River Mouth Basin.The Wen 2 Member hosts excellent,thick lacustrine source rocks with strong longitudinal heterogeneity and an average total organic carbon(TOC)content of over 4.9%.The Wen 2 Member can be divided into three units(I,II,III)from bottom to top.Unit I features excellent source rocks with Type I organic matters(average TOC of 5.9%)primarily sourced from lake organisms;Unit II hosts source rocks dominated by Type II2 organic matters(average TOC of 2.2%),which are originated from mixed sources dominated by terrestrial input.Unit III contains good to excellent source rocks dominated by Type II1 organic matters(average TOC of 4.9%),which are mainly contributed by lake organisms and partially by terrestrial input.Under the background of rapid subsidence and limited source supply during intense rifting period in the Eocene,excellent source rocks were developed in Wen 2 Member in the Northern Shunde Subsag under the coordinated control of warm and humid climate,volcanic activity,and deep-water reducing conditions.During the deposition of Unit I,the warm and humid climate and volcanic activity promoted the proliferation of lake algaes,primarily Granodiscus,resulting in high initial productivity,and deep-water reducing conditions enabled satisfactory preservation of organic matters.These factors jointly controlled the development and occurrence of excellent source rocks.During the deposition of Unit II,a transition from warm to cool and semi-arid paleoclimatic conditions led to a decrease in lake algaes and initial productivity.Additionally,enhanced terrestrial input and shallow-water,weakly oxidizing water conditions caused a significant dilution and decomposition of organic matters,degrading the quality of source rocks.During the deposition of Unit III,when the paleoclimatic conditions are cool and humid,Pediastrum and Botryococcus began to thrive,leading to an increase in productivity.Meanwhile,the reducing environment of semi-deep water facilitated the preservation of excellent source rocks,albeit slightly inferior to those in Unit I.The study results clarify the differential origins and development models of various source rocks in the Shunde Sag,offering valuable guidance for evaluating source rocks and selecting petroleum exploration targets in similar marginal sags.展开更多
The present study investigated the effects of varying protein source combinations and feeding strategies on the growth,health and organoleptic quality of the large yellow croaker(Larimichthys crocea).Three iso-nitroge...The present study investigated the effects of varying protein source combinations and feeding strategies on the growth,health and organoleptic quality of the large yellow croaker(Larimichthys crocea).Three iso-nitrogenous and iso-lipidic diets were formulated.The control diet was made with 62%fish meal(FM).The other two experimental diets were formulated by replacing 45%FM with 22.5%mealworm(TM)and 22.5%cottonseed protein concentrate(CPC),or with 22.5%TM and 22.5%Clostridium autoethanogenum protein(CAP),respectively.The three kinds of diet were named as A1,A2 and A3,respectively.Five groups of large yellow croaker were fed with two different strategies:the first three groups were continuously fed with A1,A2 and A3 diets,respectively.The fourth group was alternately fed with A1 and A2 diet every 5 days.The fifth group was alternately fed with A1 and A3diet every 5 days.The five groups were named D1,D2,D3,D1-2 and D1-3,respectively.Results showed that D2 and D3 groups exhibited significantly lower weight gain rate(WGR)and higher feed conversion ratios(FCR)compared to the D1 group.The D1-2 and D1-3 groups exhibited improved WGR and significantly reduced FCR compared to the D2 and D3 groups.The A2 and A3 diets significantly suppressed digestive enzymes'activities compared to A1,whereas alternate-feeding groups significantly enhanced the enzyme activities.Compared to the D1 group,D2 and D3 groups significantly downregulated mRNA expression levels of intestinal antiinflammatory cytokines and upregulated the expression of pro-inflammatory mediators.The anti-inflammatory abilities in the D1-2and D1-3 groups were significantly higher than those in the D2 and D3 groups.Additionally,diets containing TM+CAP and TM+CPC protein sources enhanced ventral redness and yellowness indices.Considering the growth,digestion,immunity and organoleptic quality of large yellow croaker,it is recommended to replace up to 45%of FM with TM+CPC and use an alternate-feeding strategy.展开更多
Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters...Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters to estimate source depth accurately.Unlike traditional matched field processing(MFP)and matched mode processing(MMP),the proposed approach can estimate source depth directly from the data received by sensors without requiring complete environmental information.Firstly,the broadband Stokes parameters(BSP)are established using the normal mode theory.Then the nonstationary phase approximation is used to simplify the theoretical derivation,which is necessary when dealing with broadband integrals.Additionally,range terms of the BSP are eliminated by normalization.By analyzing the depth distribution of the normalized broadband Stokes parameters(NBSP),it is found that the NBSP exhibit extreme values at the source depth,which can be used for source depth estimation.So the proposed depth estimation method is based on searching the peaks of the NBSP.Simulations show that this method is effective in relatively simple shallow water environments.Finally,the effect of source range,frequency bandwidth,sound speed profile(SSP),water depth,and signal-to-noise ratio(SNR)are studied.The findings indicate that the proposed method can accurately estimate the source depth when the SNR is greater than-5 d B and does not need to consider model mismatch issues.Additionally,variations in environmental parameters have minimal impact on estimation accuracy.Compared to MFP,the proposed method requires a higher SNR,but demonstrates superior robustness against fluctuations in environmental parameters.展开更多
The diversion effect caused by the linked structure in a metro tunnel with cross-passage complicates the impact of longitudinal fire source location on the smoke backflow layering behavior that has not been clarified,...The diversion effect caused by the linked structure in a metro tunnel with cross-passage complicates the impact of longitudinal fire source location on the smoke backflow layering behavior that has not been clarified,despite the fact that the scenario exists in practice.A series of laboratory-scale experiments were conducted in this study to investigate the smoke back-layering length in a model tunnel with cross-passage.The heat release rate,the velocity of longitudinal air flow,and the location of the fire source were all varied.It was found that the behavior of smoke backflow for the fire source located at the upstream of bifurcation point resembles a single-hole tunnel fire.As the fire source’s position shifts downstream from the bifurcation point,the length of smoke back-layering progressively increases.A competitive interaction exists between airflow diversion and smoke diversion during smoke backflow,significantly affecting the smoke back-layering length in the main tunnel.The dimensionless smoke back-layering length model was formulated in a tunnel featuring a cross-passage,taking into account the positions of longitudinal fire sources.The dimensionless smoke back-layering length exhibits a positive correlation with the 17/18 power of total heat release rate Q and a negative correlation with the 5/2 power of longitudinal ventilation velocity V.展开更多
The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer r...The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.展开更多
This study examined a case of ventilator-associated pneumonia caused by Ralstonia mannitolilytica in a neonatal department in order to determine the source of infection and mode of transmission.Symptoms of infection b...This study examined a case of ventilator-associated pneumonia caused by Ralstonia mannitolilytica in a neonatal department in order to determine the source of infection and mode of transmission.Symptoms of infection began to appear on day 16 of admission,and both sputum and catheter tip cultures revealed R.mannitolilytica.The infection control department of the hospital later sampled and identified R.mannitolilytica in the ventilator tube that was used by the patient with the exact gene sequence as the infecting strain.These findings indicate that ventilator tubing is a significant contamination source of this pathogen,and hospitals need to enhance their disinfection methods of ventilator-related devices.展开更多
The Southern Advanced Photon Source(SAPS)is a diffraction-limited synchrotron light source under design,which employs longitudinal injection as its primary injection scheme.This kind of injection scheme requires that ...The Southern Advanced Photon Source(SAPS)is a diffraction-limited synchrotron light source under design,which employs longitudinal injection as its primary injection scheme.This kind of injection scheme requires that the injected beam has a short bunch length and low emittance,and the preferred injector should offer high stability and low cost.Therefore,an injector based on a booster synchrotron was developed.The proposed injector includes a 250 MeV linac,a booster synchrotron that ramps the beam energy to 3.5 GeV,and two beam transport lines to ensure efficient beam delivery and beam quality preservation.The linac utilizes a thermionic high-voltage DC gun for reliable operation and features a bunching system with an advanced focusing system to preserve the emittance.To meet the injection requirements of the SAPS,a comprehensive design for the booster has been conducted.The booster synchrotron employs a threefold lattice structure,incorporating modified theoretical minimum emittance cells with a small momentum compaction factor and a high voltage to achieve an emittance of 3.98 nm rad and a bunch length of 4.8 mm.The injector has the potential to deliver a high charge,reducing the injection period of the storage ring to less than 1 min.Simulations demonstrated the expected performance,with a transmission efficiency of 90%,confirming its capability to meet the injection requirement of the SAPS storage ring.This design offers a stable and efficient solution for the SAPS.展开更多
In wave-equation migration and demigration,the cross-correlation imaging/forwarding step implicitly injects an additional copy of the source wavelet,so that the amplitude spectrum of the wavelet is applied redundantly...In wave-equation migration and demigration,the cross-correlation imaging/forwarding step implicitly injects an additional copy of the source wavelet,so that the amplitude spectrum of the wavelet is applied redundantly(effectively imposing a wavelet-spectrum weighting,often akin to an amplitude-squared bias).This redundancy degrades structural fidelity and amplitude balance yet is frequently overlooked.We(i)formalize the mechanism by which cross-correlation duplicates the source-wavelet amplitude effect in both migration and demigration,and(ii)introduce a source-equalized operator that removes the redundancy by deconvolving(or dividing by)the wavelet amplitude spectrum in the imaging condition and its demigration counterpart,while leaving phase/kinematics intact.Using a band-limited Ricker wavelet on a two-layer model and on Marmousi,we show that,if unmanaged,the redundant wavelet spectrum broadens main lobes,introduces ringing,and suppresses vertical resolution in migrated images,and inflates spectrum mismatches between demigrated and observed data even when peak times agree.With our correction,images recover observed-data-consistent bandwidth and sharpened interfaces,and demigrated data also exhibit improved spectrum conformity and reduced amplitude misfit.The results clarify when source amplitudes matter,why cross-correlation makes them redundantly matter,and how a lightweight spectral correction restores physically meaningful amplitude behavior in wave-equation migration/demigration.展开更多
We present the preparation and measurement of the radioactive isotope^(37)Ar,which was produced using thermal neutrons from a reactor,as a calibration source for liquid xenon time projection chambers.^(37)Ar is a low-...We present the preparation and measurement of the radioactive isotope^(37)Ar,which was produced using thermal neutrons from a reactor,as a calibration source for liquid xenon time projection chambers.^(37)Ar is a low-energy calibration source with a half-life of 35.01 days,making it suitable for calibration in the low-energy region of liquid xenon dark-matter experiments.Radioactive isotope^(37)Ar was produced by irradiating ^(36)Ar with thermal neutrons.It was subsequently measured in a gaseous xenon time projection chamber(GXe TPC)to validate its radioactivity.Our results demonstrate that^(37)Ar is an effective and viable calibration source that offers precise calibration capabilities in the low-energy domain of xenon-based detectors.展开更多
We conducted a field campaign to investigate the chemical composition,sources,and light absorption of submicron aerosols(PM_(1))from early 2022 in Nanjing,China.The average concentration of PM_(1) was 31μg m^(−3),org...We conducted a field campaign to investigate the chemical composition,sources,and light absorption of submicron aerosols(PM_(1))from early 2022 in Nanjing,China.The average concentration of PM_(1) was 31μg m^(−3),organics(33%)constituted the largest fraction,followed by nitrate(30%),sulfate(18%),ammonium(15%),chloride(3%),and rBC(2%).Four organic aerosol(OA)subcomponents were identified,including two primary OA(POA)and two secondary OA(SOA).The less-oxidized SOA(LO-OOA)contributes the most to the total OA mass(59%).LO-OOA is tightly correlated with the tracer ion C_(2)H_(4)O_(2)^(+)from levoglucosan,and another aged biomass-burning derived species,K_(3)SO_(4)^(+),suggesting it was likely influenced by aged biomass-burning OA.Our study also revealed that fireworks during the Spring Festival have a detrimental impact on air quality,contributing to secondary formation and accumulation under static winter meteorological conditions,prolonging the pollution duration.Also,LO-OOA was found to have the strongest light-absorbing ability.Our results highlight that the light absorption of LO-OOA can mainly be attributed to the C_(x)H_(y)N^(+) family,increased with the double-bond equivalent value.The more-oxidized SOA(MO-OOA)exhibited a negligible light absorption and was strongly correlated with daytime photochemical processes,implying a light-bleaching effect.This study enhances our understanding of the regional contribution of biomass combustion and fireworks to PM_(1) pollution in Nanjing,a typical megacity in the Yangtze River Delta region,during winter,aiding in the development of strategies for long-term air quality improvement in the region.展开更多
The Mianhuakeng uranium deposit,characterized by uranium-rich granite,serves as a key site for research into crustal radioactive heating.Based on 45 rock samples,this study reviews that the host granite in the Mianhua...The Mianhuakeng uranium deposit,characterized by uranium-rich granite,serves as a key site for research into crustal radioactive heating.Based on 45 rock samples,this study reviews that the host granite in the Mianhuakeng uranium deposit has a high radioactive heat production rate(avg.5.50μW/m³)and a low Th/U ratio(avg.2.62).Uranium-rich granite and its alteration zone within the upper crust(0-5 km depth)contribute about 45%of the total radioactive heat production,wich is crucial for controlling geothermal resource distribution.For uranium-thermal at tectonic plate margins,a symbiotic geological model was proposed:Firstly,subduction of the Pacific Plate caused upwelling of the asthenosphere,generating a high heat-flow background.Secondly,heat transfer is enhanced by major faults such as the Youdong and Mianhuakeng faults.Subsequently,uranium was mobilized,transported,and enriched within the granite through deep siliceous hydrothermal activity and associated alteration.Ultimately,the uranium enrichment in granite leads to increased radioactive heat production,resulting in local thermal anomalies.This model provides a theoretical support for exploring and developing uranium-thermal symbiotic resources in South China.展开更多
This study investigated the heterogeneous responses of organic matter(OM)in highly-to over-mature source rocks during thermal maturation.An integrated analysis was conducted on the Raman spectroscopic and geochemical ...This study investigated the heterogeneous responses of organic matter(OM)in highly-to over-mature source rocks during thermal maturation.An integrated analysis was conducted on the Raman spectroscopic and geochemical signatures of shales from the Lower Silurian Longmaxi Formation and the Lower Cambrian Qiongzhusi Formation,as well as anthracites from the Lower Permian Shanxi–Formation and the Upper Carboniferous Taiyuan Formation(collectively referred to as the Shanxi Taiyuan Formations).Additionally,burial and thermal evolution modeling was employed to support the analysis.A systematic assessment of Raman spectral parameters(e.g.,the positions and intensity ratio of the D and G bands)revealed robust correlations between the thermal history patterns of source rocks and molecular structural evolution parameters.The subsequent mechanistic quantification demonstrated that the maturation state of the source rocks was subjected to the hierarchical control of three principal factors:Peak heating temperature,the duration of sustained thermal intensity,and effective maturation duration.In addition,comparative analyses demonstrated that the anthracites attained higher structural ordering under sustained thermal conditions.This contrasts with the disordered carbon matrices observed in the intermittently heated shales.Raman spectroscopy further revealed broader variations in the D and G band intensities of the Longmaxi Formation compared to the Qiongzhusi Formation.This difference is associated with their different thermal histories.The thermal burial histories confirm that shales in the Longmaxi Formation underwent thermal exposure at lower peak temperatures over a shorter duration compared to those in the Qiongzhusi Formation.Finally,this study established a maturity calibration model for over-mature source rocks through a systematic correlation between Raman peak height ratios(R_(D/G))and vitrinite reflectance(R_(o)).展开更多
Intervention strategies to control non-point source nitrogen(N)and phosphorus(P)pollution in agriculture are expensive and there is a trade-off between engineering cost and treatment effectiveness.Implementing strateg...Intervention strategies to control non-point source nitrogen(N)and phosphorus(P)pollution in agriculture are expensive and there is a trade-off between engineering cost and treatment effectiveness.Implementing strategies often result in unsatisfactory outcomes and massive engineering costs when managing diffusive pollution in agricultural catchments.To address this issue,this paper proposes a robust,handy,catchment N&P decision support system(CNPDSS),an Android-based smartphone system integrated with a web-based geographic information system(GIS).The CNPDSS aims to provide artificial intelligence-driven decisions that minimize N&P loadings and engineering costs for mitigating pollution in agricultural catchments.It consists of four components:a general user interface(GUI),GIS,N&P pollution modeling(NPPM),and a DSS.The CNPDSS simplifies the GUI and integrates GIS modules to create a user-friendly interface,enabling non-professional users to operate the system easily through intuitive actions.The NPPM uses straightforward empirical models to predict N&P loadings,enhancing efficiency by avoiding excessive parameters.Taking into account the N&P movement pathway in the catchment,the DSS incorporates three control measures:source reduction in farmland(before migration stage),process retention by ecological ditch(midway transport stage),and down-end purification by constructed wetland(waterbody discharge stage),to formulate a comprehensive ternary controlling strategy.To optimize the cost-effectiveness of any proposed N&P control strategies for sub-catchments,a differential evolution algorithm(DEA)is employed in CNPDSS to carry out a dual-objective decision-making optimization computation.In this study,the CNPDSS is applied to a case study in an agricultural catchment in Central China to develop the most cost-effective ternary N&P control strategies that ensure the catchment water quality within Criterion Ⅲ of the Chinese Surface Water Quality Standard GB3838-2002 is met(total N concentration≤1.0 mg L^(-1)and total P concentration≤0.2 mg L^(-1)).Our results demonstrate that the CNPDSS is feasible and also possesses an adaptive design and flexible architecture to enable its generalization and extension to support strong hands-on applications in other catchments.展开更多
The identification of rock mass hazard sources is fundamental for preventing rockfall and landslide disasters in mountainous regions,with rock mass structural characteristics playing a vital role in hazard assessment....The identification of rock mass hazard sources is fundamental for preventing rockfall and landslide disasters in mountainous regions,with rock mass structural characteristics playing a vital role in hazard assessment.In this study,terrestrial laser scanning(TLS)and unmanned aerial vehicle(UAV)technologies were integrated to enhance the evaluation methodology for rock mass hazard sources,focusing on the Sichuan Yanjiang Expressway project in China.The findings demonstrate that TLS-UAV technology enhanced both spatial coverage and data density in slope modeling.Through integrated algorithmic analysis,rock discontinuities within heterogeneous datasets were systematically identified,enabling quantitative extraction and statistical analysis of key geometric parameters,including orientation,trace length,spacing,and roughness.Furthermore,quantitative models were developed for cohesion,friction angle and the morphology parameter M of in situ discontinuities,respectively,facilitating efficient mechanical parameter acquisition.A novel rock mass hazard index(RHI)was developed incorporating discontinuity geometric rating(DGR),discontinuity mechanical rating(DMR),and slope mass rating(SMR).Field validation confirmed the methodology's effectiveness in evaluating risk levels and spatial heterogeneity of rock mass hazard sources,revealing the contribution of different discontinuity sets to the rock mass hazard and identifying the primary discontinuity sets controlling instability mechanisms.This study is of great significance for evaluating discontinuity-controlled rock mass hazard sources and preventing rockfall disasters.展开更多
The movement of global ocean circulation in the Earth’s main magnetic field generates a measurable induced magnetic field(about 2 nT at geomagnetic satellite altitudes).However,this ocean circulation-induced magnetic...The movement of global ocean circulation in the Earth’s main magnetic field generates a measurable induced magnetic field(about 2 nT at geomagnetic satellite altitudes).However,this ocean circulation-induced magnetic field has not been previously estimated or incorporated into geomagnetic field models,potentially causing leakage into the core field model.Here,we present a method to account for the circulation-induced magnetic field during geomagnetic field modeling.First,a forward model of the circulation-induced magnetic field is constructed by numerically solving electromagnetic induction equations based on a realistic ocean circulation model.Then,this forward model is subtracted from the observed data.Finally,the core and lithospheric fields,magnetospheric and Earth’s mantle-induced fields,and the ocean tide-induced magnetic field are co-estimated.Applying our method to over 20 years of MSS-1,Swarm,CryoSat-2,and CHAMP satellite magnetic data,we derive a new multisource geomagnetic field model(MGFM).We find that incorporating a forward model of the circulation-induced magnetic field marginally improves the fit to the data.Furthermore,we demonstrate that neglecting the circulation-induced magnetic field in geomagnetic field modeling results in leakage into the core field model.The highlights of the MGFM model include:(i)a good agreement with the widely used CHAOS model series;(ii)the incorporation of magnetic fields induced by both ocean tides and circulation;and(iii)the suppression of leakage of the circulation-induced magnetic field into the core field model.展开更多
文摘Theauthor proposes a dual layer source grid load storage collaborative planning model based on Benders decomposition to optimize the low-carbon and economic performance of the distribution network.The model plans the configuration of photovoltaic(3.8 MW),wind power(2.5 MW),energy storage(2.2 MWh),and SVC(1.2 Mvar)through interaction between upper and lower layers,and modifies lines 2–3,8–9,etc.to improve transmission capacity and voltage stability.The author uses normal distribution and Monte Carlo method to model load uncertainty,and combines Weibull distribution to describe wind speed characteristics.Compared to the traditional three-layer model(TLM),Benders decomposition-based two-layer model(BLBD)has a 58.1%reduction in convergence time(5.36 vs.12.78 h),a 51.1%reduction in iteration times(23 vs.47 times),a 8.07%reduction in total cost(12.436 vs.13.528 million yuan),and a 9.62%reduction in carbon emissions(12,456 vs.13,782 t).After optimization,the peak valley difference decreased from4.1 to 2.9MW,the renewable energy consumption rate reached 93.4%,and the energy storage efficiency was 87.6%.Themodel has been validated in the IEEE 33 node system,demonstrating its superiority in terms of economy,low-carbon,and reliability.
基金supported by the National Key R&D Program of China(No.2022YFC3003502).
文摘The northern segment of the North-South Seismic Belt is characterized by intense crustal deformation,well-developed active tectonics,and frequent occurrences of strong earthquakes.Therefore,conducting a Probabilistic Seismic Hazard Analysis(PSHA)for this region is of significant importance for supporting seismic fortification in major engineering projects and formulating disaster prevention and mitigation policies.In this study,a composite seismic source model was constructed by integrating data on historical earthquakes,active faults,and paleoseismicity.Furthermore,a logic tree framework was employed to quantify epistemic uncertainties,enabling a systematic seismic hazard assessment of the region.To more accurately characterize the spatial heterogeneity of seismic activity,improvements were made to both the Circular Spatial Smoothing Model(CSSM)with a fixed radius and the Adaptive Spatial Smoothing Model(ASSM),with full consideration given to the spatiotemporal completeness of historical earthquake magnitudes.Regarding the CSSM,for scenarios involving small sample sizes in earthquake catalogs,the cross-validation method proposed in this study demonstrated higher robustness than the maximum likelihood method in determining the optimal correlation distance.Performance evaluation results indicate that while both models effectively characterize seismic activity,the ASSM exhibits superior overall predictive performance compared to the CSSM,owing to its ability to adaptively adjust the smoothing radius according to seismic density.Significant discrepancies were observed in the Peak Ground Acceleration(PGA)results calculated with a 10%probability of exceedance in 50 years across different combinations of seismic source models.The single spatially smoothed point-source model yielded a maximum PGA of approximately 0.52 g,with high-value areas concentrated near historical epicenters,thereby significantly underestimating the hazard associated with major fault zones.When combined with the simple fault-source model,the maximum PGA increased to 0.8 g,with high-value zones exhibiting a zonal distribution along faults;however,the risk remained underestimated for faults with low slip rates that are nevertheless approaching their recurrence cycles.Following the introduction of the time-dependent characteristic fault-source model,local PGA values for faults in the middle-to-late stages of their recurrence cycles increased by a factor of 2 to 7 compared to the single model.These results demonstrate that the characteristic fault-source model reasonably delineates the time-dependence of large earthquake recurrence,thereby providing a more accurate assessment of imminent seismic risks.By comprehensively applying the improved spatially smoothed pointsource model,the simple fault-source model,and the characteristic fault-source model,the following faults within the region were identified as having high seismic hazard:the Huangxianggou,Zhangxian,and Tianshui segments of the Xiqinling northern edge fault;the Maqin-Maqu segment of the Dongkunlun fault;the Longriqu fault;the Maoergai fault;the Elashan fault;the Riyueshan fault;the eastern segment of the Lenglongling fault;the Maxianshan segment of the Maxianshan northern Margin fault;and the Maomaoshan-Jinqianghe segment of the Laohushan-Maomaoshan fault.As these faults are located within seismic gaps or are approaching the recurrence periods of large earthquakes,they should be prioritized for current and future seismic monitoring as well as disaster prevention and mitigation efforts.
基金funded by Scientific Research Deanship at University of Ha’il-Saudi Arabia through project number(RG-24014).
文摘We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.
文摘39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.ArcGIS inverse distance weight difference method was used to analyze the characteristics of pollution distribution,and single-factor pollution index,Nemerow comprehensive pollution index,ground accumulation index,and potential ecological risk index were selected to evaluate the characteristics of heavy metal pollution.Based on correlation analysis,the absolute principal component-multiple linear regression(APCS-MLR)and positive definite matrix factorization(PMF)models were used to analyze the sources of soil heavy metals.The results showed that the average concentrations of all eight heavy metals exceeded both national and Guangxi soil background values.Hg,Cd,and Zn exhibited high variation(greater than 0.5),indicating significant external disturbances,and their spatial distribution was closely related to mining activity locations.The single-factor pollution index evaluation indicated varying degrees of pollution risk for Cd,Zn,and As,with Cd and Zn being the most severe pollutants,as 69.23%and 30.77%of the samples fell into the moderate pollution or higher category.The geoaccumulation index analysis ranked the mean pollution levels of the eight elements as follows:Zn>Cd>Ni>Pb>Cu>Cr>Hg>As,with Cd and Zn showing the most severe contamination,and 51.28%of the samples exhibiting moderate or higher pollution levels.The Nemerow comprehensive pollution index evaluation showed that 74.35%of soil samples were classified as moderate to heavy pollution.The potential ecological risk index assessment indicated significant ecological risks posed by Cd and Zn,with 82.05%and 5.12%of the samples classified as causing strong to extreme ecological risks,respectively.The source apportionment analysis revealed minor differences between the two models.The APCS-MLR model identified three pollution sources and their contribution rates:anthropogenic mining sources(31.13%),parent material sources(40.38%),and unidentified sources(28.49%).The PMF model identified three pollution sources with contribution rates of anthropogenic mining sources(26.10%),parent material sources(46.96%),and a combined traffic and agricultural source(26.61%).Pb,Hg,Cd,and Zn mainly originated from mining activities;Cr,As,and Ni were primarily derived from the parent material,while Cu was predominantly attributed to traffic and agricultural sources.These findings provide a scientific basis for the prevention and control of heavy metal pollution in mining areas.
基金supported by the National Natural Science Foundation of China(Grant Nos.42250103 and 42174090)the Opening Fund of Key Laboratory of Geological Survey and Evaluation of Ministry of Education(Grant No.GLAB2023ZR02)the MOST Special Fund from the State Key Laboratory of Geological Processes and Mineral Resources(Grant No.MSFGPMR2022-4).
文摘The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.However,the inversion for the ES model suffers from nonuniqueness and instability,which remain unresolved.To mitigate these issues,we introduce both the minimum and flattest models into the model objective function as an alternative regularization approach in the spherical ES method.We first present the methods,then analyze the accuracy of forward calculation and test the proposed ES method in this study by using synthetic data.The experimental results from simulation data indicate that our proposed regularization effectively suppresses the Backus effect and mitigates inversion instability in the low-latitude region.Finally,we apply the proposed method to magnetic anomaly data from China Seismo-Electromagnetic Satellite-1(CSES-1)and Macao Science Satellite-1(MSS-1)magnetic measurements over Africa by constructing an ES model of the large-scale lithospheric magnetic field.Compared with existing global lithospheric magnetic field models,our ES model demonstrates good consistency at high altitudes and predicts more stable fields at low altitudes.Furthermore,we derive the reduction to the pole(RTP)magnetic anomaly fields and the apparent susceptibility contrast distribution based on the ES model.The latter correlates well with the regional tectonic framework in Africa and surroundings.
基金Supported by the Research Project of China National Offshore Oil Corporation(SCKY-2023-HN-3)。
文摘Based on the comprehensive analysis of data from petrology and mineralogy,well logging,seismic surveys,paleontology,and geochemistry,a detailed research was conducted on paleoenvironmental and paleoclimatic conditions,and modeling of the source rocks in the second member of the Eocene Wenchang Formation(Wen 2 Member)in the Northern Shunde Subsag at the southwestern margin of the Pearl River Mouth Basin.The Wen 2 Member hosts excellent,thick lacustrine source rocks with strong longitudinal heterogeneity and an average total organic carbon(TOC)content of over 4.9%.The Wen 2 Member can be divided into three units(I,II,III)from bottom to top.Unit I features excellent source rocks with Type I organic matters(average TOC of 5.9%)primarily sourced from lake organisms;Unit II hosts source rocks dominated by Type II2 organic matters(average TOC of 2.2%),which are originated from mixed sources dominated by terrestrial input.Unit III contains good to excellent source rocks dominated by Type II1 organic matters(average TOC of 4.9%),which are mainly contributed by lake organisms and partially by terrestrial input.Under the background of rapid subsidence and limited source supply during intense rifting period in the Eocene,excellent source rocks were developed in Wen 2 Member in the Northern Shunde Subsag under the coordinated control of warm and humid climate,volcanic activity,and deep-water reducing conditions.During the deposition of Unit I,the warm and humid climate and volcanic activity promoted the proliferation of lake algaes,primarily Granodiscus,resulting in high initial productivity,and deep-water reducing conditions enabled satisfactory preservation of organic matters.These factors jointly controlled the development and occurrence of excellent source rocks.During the deposition of Unit II,a transition from warm to cool and semi-arid paleoclimatic conditions led to a decrease in lake algaes and initial productivity.Additionally,enhanced terrestrial input and shallow-water,weakly oxidizing water conditions caused a significant dilution and decomposition of organic matters,degrading the quality of source rocks.During the deposition of Unit III,when the paleoclimatic conditions are cool and humid,Pediastrum and Botryococcus began to thrive,leading to an increase in productivity.Meanwhile,the reducing environment of semi-deep water facilitated the preservation of excellent source rocks,albeit slightly inferior to those in Unit I.The study results clarify the differential origins and development models of various source rocks in the Shunde Sag,offering valuable guidance for evaluating source rocks and selecting petroleum exploration targets in similar marginal sags.
基金financially supported by the Key Research and Development Program of Shandong,China(No.2021SFGC0701)。
文摘The present study investigated the effects of varying protein source combinations and feeding strategies on the growth,health and organoleptic quality of the large yellow croaker(Larimichthys crocea).Three iso-nitrogenous and iso-lipidic diets were formulated.The control diet was made with 62%fish meal(FM).The other two experimental diets were formulated by replacing 45%FM with 22.5%mealworm(TM)and 22.5%cottonseed protein concentrate(CPC),or with 22.5%TM and 22.5%Clostridium autoethanogenum protein(CAP),respectively.The three kinds of diet were named as A1,A2 and A3,respectively.Five groups of large yellow croaker were fed with two different strategies:the first three groups were continuously fed with A1,A2 and A3 diets,respectively.The fourth group was alternately fed with A1 and A2 diet every 5 days.The fifth group was alternately fed with A1 and A3diet every 5 days.The five groups were named D1,D2,D3,D1-2 and D1-3,respectively.Results showed that D2 and D3 groups exhibited significantly lower weight gain rate(WGR)and higher feed conversion ratios(FCR)compared to the D1 group.The D1-2 and D1-3 groups exhibited improved WGR and significantly reduced FCR compared to the D2 and D3 groups.The A2 and A3 diets significantly suppressed digestive enzymes'activities compared to A1,whereas alternate-feeding groups significantly enhanced the enzyme activities.Compared to the D1 group,D2 and D3 groups significantly downregulated mRNA expression levels of intestinal antiinflammatory cytokines and upregulated the expression of pro-inflammatory mediators.The anti-inflammatory abilities in the D1-2and D1-3 groups were significantly higher than those in the D2 and D3 groups.Additionally,diets containing TM+CAP and TM+CPC protein sources enhanced ventral redness and yellowness indices.Considering the growth,digestion,immunity and organoleptic quality of large yellow croaker,it is recommended to replace up to 45%of FM with TM+CPC and use an alternate-feeding strategy.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12274348 and 12004335)the National Key Research and Development Program of China(Grant No.2024YFC2813800)。
文摘Presented in this study is a novel method for estimating the depth of single underwater source in shallow water,utilizing vector sensors.The approach leverages the depth distribution of the broadband Stokes parameters to estimate source depth accurately.Unlike traditional matched field processing(MFP)and matched mode processing(MMP),the proposed approach can estimate source depth directly from the data received by sensors without requiring complete environmental information.Firstly,the broadband Stokes parameters(BSP)are established using the normal mode theory.Then the nonstationary phase approximation is used to simplify the theoretical derivation,which is necessary when dealing with broadband integrals.Additionally,range terms of the BSP are eliminated by normalization.By analyzing the depth distribution of the normalized broadband Stokes parameters(NBSP),it is found that the NBSP exhibit extreme values at the source depth,which can be used for source depth estimation.So the proposed depth estimation method is based on searching the peaks of the NBSP.Simulations show that this method is effective in relatively simple shallow water environments.Finally,the effect of source range,frequency bandwidth,sound speed profile(SSP),water depth,and signal-to-noise ratio(SNR)are studied.The findings indicate that the proposed method can accurately estimate the source depth when the SNR is greater than-5 d B and does not need to consider model mismatch issues.Additionally,variations in environmental parameters have minimal impact on estimation accuracy.Compared to MFP,the proposed method requires a higher SNR,but demonstrates superior robustness against fluctuations in environmental parameters.
基金funded by the National Natural Science Foundation of China(NSFC)under Grant No.52278415the National Key Research and Development Program of China under Grant No.2022YFC3801104+2 种基金Hebei Provincial Department of Education Project under Grant No.QN2025304the Innovation Fund Project of Hebei University of Engineering under Grant No.SJ2401002066the Sichuan Science and Technology Program under Grant No.2023YFS0407。
文摘The diversion effect caused by the linked structure in a metro tunnel with cross-passage complicates the impact of longitudinal fire source location on the smoke backflow layering behavior that has not been clarified,despite the fact that the scenario exists in practice.A series of laboratory-scale experiments were conducted in this study to investigate the smoke back-layering length in a model tunnel with cross-passage.The heat release rate,the velocity of longitudinal air flow,and the location of the fire source were all varied.It was found that the behavior of smoke backflow for the fire source located at the upstream of bifurcation point resembles a single-hole tunnel fire.As the fire source’s position shifts downstream from the bifurcation point,the length of smoke back-layering progressively increases.A competitive interaction exists between airflow diversion and smoke diversion during smoke backflow,significantly affecting the smoke back-layering length in the main tunnel.The dimensionless smoke back-layering length model was formulated in a tunnel featuring a cross-passage,taking into account the positions of longitudinal fire sources.The dimensionless smoke back-layering length exhibits a positive correlation with the 17/18 power of total heat release rate Q and a negative correlation with the 5/2 power of longitudinal ventilation velocity V.
基金supported by the National Natural Science Foundation of China(Grant No.42130312)。
文摘The complexity of the seismicity pattern for the subduction zone along the oceanic plate triggered the outer rise events and revealed cyclic tectonic deformation conditions along the plate subduction zones.The outer rise earthquakes have been observed along the Sunda arc,following the estimated rupture area of the 2005 M_(W)8.6 Nias earthquakes.Here,we used kinematic waveform inversion(KIWI)to obtain the source parameters of the 14 May 2021 M_(W)6.6 event off the west coast of northern Sumatra and to define the fault plane that triggered this outer rise event.The KIWI algorithm allows two types of seismic source to be configured:the moment tensor model to describe the type of shear with six moment tensor components and the Eikonal model for the rupture of pure double-couple sources.This method was chosen for its flexibility to be applied for different sources of seismicity and also for the automated full-moment tensor solution with real-time monitoring.We used full waveform traces from 8 broadband seismic stations within 1000 km epicentral distances sourced from the Incorporated Research Institutions for Seismology(IRIS-IDA)and Geofon GFZ seismic record databases.The initial origin time and hypocenter values are obtained from the IRIS-IDA.The synthetic seismograms used in the inversion process are based on the existing regional green function database model and were accessed from the KIWI Tools Green's Function Database.The obtained scalar seismic moment value is 1.18×10^(19)N·m,equivalent to a moment magnitude M_(W)6.6.The source parameters are 140°,44°,and−99°for the strike,dip,and rake values at a centroid depth of 10.2 km,indicating that this event is a normal fault earthquake that occurred in the outer rise area.The outer rise events with normal faults typically occur at the shallow part of the plate,with nodal-plane dips predominantly in the range of 30°-60°on the weak oceanic lithosphere due to hydrothermal alteration.The stress regime around the plate subduction zone varies both temporally and spatially due to the cyclic influences of megathrust earthquakes.Tensional outer rise earthquakes tend to occur after the megathrust events.The relative timing of these events is not known due to the viscous relaxation of the down going slab and poroelastic response in the trench slope region.The occurrence of the 14 May 2021 earthquake shows the seismicity in the outer rise region in the strongly coupled Sunda arc subduction zone due to elastic bending stress within the duration of the seismic cycle.
文摘This study examined a case of ventilator-associated pneumonia caused by Ralstonia mannitolilytica in a neonatal department in order to determine the source of infection and mode of transmission.Symptoms of infection began to appear on day 16 of admission,and both sputum and catheter tip cultures revealed R.mannitolilytica.The infection control department of the hospital later sampled and identified R.mannitolilytica in the ventilator tube that was used by the patient with the exact gene sequence as the infecting strain.These findings indicate that ventilator tubing is a significant contamination source of this pathogen,and hospitals need to enhance their disinfection methods of ventilator-related devices.
基金supported by the Guangdong Basic and Applied Basic Research Foundation,China(No.2021B1515140007).
文摘The Southern Advanced Photon Source(SAPS)is a diffraction-limited synchrotron light source under design,which employs longitudinal injection as its primary injection scheme.This kind of injection scheme requires that the injected beam has a short bunch length and low emittance,and the preferred injector should offer high stability and low cost.Therefore,an injector based on a booster synchrotron was developed.The proposed injector includes a 250 MeV linac,a booster synchrotron that ramps the beam energy to 3.5 GeV,and two beam transport lines to ensure efficient beam delivery and beam quality preservation.The linac utilizes a thermionic high-voltage DC gun for reliable operation and features a bunching system with an advanced focusing system to preserve the emittance.To meet the injection requirements of the SAPS,a comprehensive design for the booster has been conducted.The booster synchrotron employs a threefold lattice structure,incorporating modified theoretical minimum emittance cells with a small momentum compaction factor and a high voltage to achieve an emittance of 3.98 nm rad and a bunch length of 4.8 mm.The injector has the potential to deliver a high charge,reducing the injection period of the storage ring to less than 1 min.Simulations demonstrated the expected performance,with a transmission efficiency of 90%,confirming its capability to meet the injection requirement of the SAPS storage ring.This design offers a stable and efficient solution for the SAPS.
基金supported by the National Natural Science Foundation of China(42430303)Strategy Priority Research Program(Category B)of the Chinese Academy of Sciences(XDB0710000)+2 种基金National Natural Science Foundation of China(42288201)the National Key R&D Program of China(2023YFF0803203)the IGGCAS start-up funding(Grant No.E251510101).
文摘In wave-equation migration and demigration,the cross-correlation imaging/forwarding step implicitly injects an additional copy of the source wavelet,so that the amplitude spectrum of the wavelet is applied redundantly(effectively imposing a wavelet-spectrum weighting,often akin to an amplitude-squared bias).This redundancy degrades structural fidelity and amplitude balance yet is frequently overlooked.We(i)formalize the mechanism by which cross-correlation duplicates the source-wavelet amplitude effect in both migration and demigration,and(ii)introduce a source-equalized operator that removes the redundancy by deconvolving(or dividing by)the wavelet amplitude spectrum in the imaging condition and its demigration counterpart,while leaving phase/kinematics intact.Using a band-limited Ricker wavelet on a two-layer model and on Marmousi,we show that,if unmanaged,the redundant wavelet spectrum broadens main lobes,introduces ringing,and suppresses vertical resolution in migrated images,and inflates spectrum mismatches between demigrated and observed data even when peak times agree.With our correction,images recover observed-data-consistent bandwidth and sharpened interfaces,and demigrated data also exhibit improved spectrum conformity and reduced amplitude misfit.The results clarify when source amplitudes matter,why cross-correlation makes them redundantly matter,and how a lightweight spectral correction restores physically meaningful amplitude behavior in wave-equation migration/demigration.
基金supported by National Key R&D grant from the Ministry of Science and Technology of China(Nos.2021YFA1601600,2023YFA1606200)National Science Foundation of China(Nos.12090062,12105008)the Major State Basic Research Development Program of China.
文摘We present the preparation and measurement of the radioactive isotope^(37)Ar,which was produced using thermal neutrons from a reactor,as a calibration source for liquid xenon time projection chambers.^(37)Ar is a low-energy calibration source with a half-life of 35.01 days,making it suitable for calibration in the low-energy region of liquid xenon dark-matter experiments.Radioactive isotope^(37)Ar was produced by irradiating ^(36)Ar with thermal neutrons.It was subsequently measured in a gaseous xenon time projection chamber(GXe TPC)to validate its radioactivity.Our results demonstrate that^(37)Ar is an effective and viable calibration source that offers precise calibration capabilities in the low-energy domain of xenon-based detectors.
基金support from the Natural Science Foundation of Jiangsu Province(Grant No.BK20240036)the National Natural Science Foundation of China(Grant Nos.U24A20515,22276099,and 22361162668)Guangxi Key Research and Development Program,China(Grant No.Guike AB24010074)。
文摘We conducted a field campaign to investigate the chemical composition,sources,and light absorption of submicron aerosols(PM_(1))from early 2022 in Nanjing,China.The average concentration of PM_(1) was 31μg m^(−3),organics(33%)constituted the largest fraction,followed by nitrate(30%),sulfate(18%),ammonium(15%),chloride(3%),and rBC(2%).Four organic aerosol(OA)subcomponents were identified,including two primary OA(POA)and two secondary OA(SOA).The less-oxidized SOA(LO-OOA)contributes the most to the total OA mass(59%).LO-OOA is tightly correlated with the tracer ion C_(2)H_(4)O_(2)^(+)from levoglucosan,and another aged biomass-burning derived species,K_(3)SO_(4)^(+),suggesting it was likely influenced by aged biomass-burning OA.Our study also revealed that fireworks during the Spring Festival have a detrimental impact on air quality,contributing to secondary formation and accumulation under static winter meteorological conditions,prolonging the pollution duration.Also,LO-OOA was found to have the strongest light-absorbing ability.Our results highlight that the light absorption of LO-OOA can mainly be attributed to the C_(x)H_(y)N^(+) family,increased with the double-bond equivalent value.The more-oxidized SOA(MO-OOA)exhibited a negligible light absorption and was strongly correlated with daytime photochemical processes,implying a light-bleaching effect.This study enhances our understanding of the regional contribution of biomass combustion and fireworks to PM_(1) pollution in Nanjing,a typical megacity in the Yangtze River Delta region,during winter,aiding in the development of strategies for long-term air quality improvement in the region.
基金supported by the National Natural Science Foundation of China(41902310,42372348,42372286)Deep Earth Probe and Mineral Resources Exploration-National Science and Technology Major Project(2024ZD1003607)+2 种基金China Geological Survey Projects(DD20230700802,DD20221819)the Basic Research Fund of the Chinese Academy of Geological Sciences(JKYQN202306)Key Research and Development Program of Shanxi Province,China(202102090301009).
文摘The Mianhuakeng uranium deposit,characterized by uranium-rich granite,serves as a key site for research into crustal radioactive heating.Based on 45 rock samples,this study reviews that the host granite in the Mianhuakeng uranium deposit has a high radioactive heat production rate(avg.5.50μW/m³)and a low Th/U ratio(avg.2.62).Uranium-rich granite and its alteration zone within the upper crust(0-5 km depth)contribute about 45%of the total radioactive heat production,wich is crucial for controlling geothermal resource distribution.For uranium-thermal at tectonic plate margins,a symbiotic geological model was proposed:Firstly,subduction of the Pacific Plate caused upwelling of the asthenosphere,generating a high heat-flow background.Secondly,heat transfer is enhanced by major faults such as the Youdong and Mianhuakeng faults.Subsequently,uranium was mobilized,transported,and enriched within the granite through deep siliceous hydrothermal activity and associated alteration.Ultimately,the uranium enrichment in granite leads to increased radioactive heat production,resulting in local thermal anomalies.This model provides a theoretical support for exploring and developing uranium-thermal symbiotic resources in South China.
基金supported by the National Natural Science Foundation of China(42362022)the Open Fund of the Shaanxi Key Laboratory of Petroleum Accumulation Geology(PAG-202406)the Open Fund of the Mine Geology and Environment Academician and Expert Workstation(2024OITYSZJGZZ-005)。
文摘This study investigated the heterogeneous responses of organic matter(OM)in highly-to over-mature source rocks during thermal maturation.An integrated analysis was conducted on the Raman spectroscopic and geochemical signatures of shales from the Lower Silurian Longmaxi Formation and the Lower Cambrian Qiongzhusi Formation,as well as anthracites from the Lower Permian Shanxi–Formation and the Upper Carboniferous Taiyuan Formation(collectively referred to as the Shanxi Taiyuan Formations).Additionally,burial and thermal evolution modeling was employed to support the analysis.A systematic assessment of Raman spectral parameters(e.g.,the positions and intensity ratio of the D and G bands)revealed robust correlations between the thermal history patterns of source rocks and molecular structural evolution parameters.The subsequent mechanistic quantification demonstrated that the maturation state of the source rocks was subjected to the hierarchical control of three principal factors:Peak heating temperature,the duration of sustained thermal intensity,and effective maturation duration.In addition,comparative analyses demonstrated that the anthracites attained higher structural ordering under sustained thermal conditions.This contrasts with the disordered carbon matrices observed in the intermittently heated shales.Raman spectroscopy further revealed broader variations in the D and G band intensities of the Longmaxi Formation compared to the Qiongzhusi Formation.This difference is associated with their different thermal histories.The thermal burial histories confirm that shales in the Longmaxi Formation underwent thermal exposure at lower peak temperatures over a shorter duration compared to those in the Qiongzhusi Formation.Finally,this study established a maturity calibration model for over-mature source rocks through a systematic correlation between Raman peak height ratios(R_(D/G))and vitrinite reflectance(R_(o)).
基金financially supported by the National Key Research and Development Program of China(2024YFD1700104 and 2022YFE0209200-03)the National Natural Science Foundation of China(42161144002 and 41977156)+3 种基金the Guangxi Natural Science Foundation,China(2022GXNSFBA035625)the Guangxi Technology Base and Talent Subject,China(Guike AD22035927)the Shandong Key Research and Development Project,China(2022TZXD0045)the State Key Laboratory of Earth System Numerical Modeling and Application,Institute of Atmospheric Physics,Chinese Academy of Sciences。
文摘Intervention strategies to control non-point source nitrogen(N)and phosphorus(P)pollution in agriculture are expensive and there is a trade-off between engineering cost and treatment effectiveness.Implementing strategies often result in unsatisfactory outcomes and massive engineering costs when managing diffusive pollution in agricultural catchments.To address this issue,this paper proposes a robust,handy,catchment N&P decision support system(CNPDSS),an Android-based smartphone system integrated with a web-based geographic information system(GIS).The CNPDSS aims to provide artificial intelligence-driven decisions that minimize N&P loadings and engineering costs for mitigating pollution in agricultural catchments.It consists of four components:a general user interface(GUI),GIS,N&P pollution modeling(NPPM),and a DSS.The CNPDSS simplifies the GUI and integrates GIS modules to create a user-friendly interface,enabling non-professional users to operate the system easily through intuitive actions.The NPPM uses straightforward empirical models to predict N&P loadings,enhancing efficiency by avoiding excessive parameters.Taking into account the N&P movement pathway in the catchment,the DSS incorporates three control measures:source reduction in farmland(before migration stage),process retention by ecological ditch(midway transport stage),and down-end purification by constructed wetland(waterbody discharge stage),to formulate a comprehensive ternary controlling strategy.To optimize the cost-effectiveness of any proposed N&P control strategies for sub-catchments,a differential evolution algorithm(DEA)is employed in CNPDSS to carry out a dual-objective decision-making optimization computation.In this study,the CNPDSS is applied to a case study in an agricultural catchment in Central China to develop the most cost-effective ternary N&P control strategies that ensure the catchment water quality within Criterion Ⅲ of the Chinese Surface Water Quality Standard GB3838-2002 is met(total N concentration≤1.0 mg L^(-1)and total P concentration≤0.2 mg L^(-1)).Our results demonstrate that the CNPDSS is feasible and also possesses an adaptive design and flexible architecture to enable its generalization and extension to support strong hands-on applications in other catchments.
基金support from the National Natural Science Foundation of China(Grant Nos.42177142 and 52378477)the Key Research and Development Program of Shaanxi(Grant No.2023-YBSF-486).
文摘The identification of rock mass hazard sources is fundamental for preventing rockfall and landslide disasters in mountainous regions,with rock mass structural characteristics playing a vital role in hazard assessment.In this study,terrestrial laser scanning(TLS)and unmanned aerial vehicle(UAV)technologies were integrated to enhance the evaluation methodology for rock mass hazard sources,focusing on the Sichuan Yanjiang Expressway project in China.The findings demonstrate that TLS-UAV technology enhanced both spatial coverage and data density in slope modeling.Through integrated algorithmic analysis,rock discontinuities within heterogeneous datasets were systematically identified,enabling quantitative extraction and statistical analysis of key geometric parameters,including orientation,trace length,spacing,and roughness.Furthermore,quantitative models were developed for cohesion,friction angle and the morphology parameter M of in situ discontinuities,respectively,facilitating efficient mechanical parameter acquisition.A novel rock mass hazard index(RHI)was developed incorporating discontinuity geometric rating(DGR),discontinuity mechanical rating(DMR),and slope mass rating(SMR).Field validation confirmed the methodology's effectiveness in evaluating risk levels and spatial heterogeneity of rock mass hazard sources,revealing the contribution of different discontinuity sets to the rock mass hazard and identifying the primary discontinuity sets controlling instability mechanisms.This study is of great significance for evaluating discontinuity-controlled rock mass hazard sources and preventing rockfall disasters.
基金supported by the National Natural Science Foundation of China(42250101,42250102)the Macao Foundation.
文摘The movement of global ocean circulation in the Earth’s main magnetic field generates a measurable induced magnetic field(about 2 nT at geomagnetic satellite altitudes).However,this ocean circulation-induced magnetic field has not been previously estimated or incorporated into geomagnetic field models,potentially causing leakage into the core field model.Here,we present a method to account for the circulation-induced magnetic field during geomagnetic field modeling.First,a forward model of the circulation-induced magnetic field is constructed by numerically solving electromagnetic induction equations based on a realistic ocean circulation model.Then,this forward model is subtracted from the observed data.Finally,the core and lithospheric fields,magnetospheric and Earth’s mantle-induced fields,and the ocean tide-induced magnetic field are co-estimated.Applying our method to over 20 years of MSS-1,Swarm,CryoSat-2,and CHAMP satellite magnetic data,we derive a new multisource geomagnetic field model(MGFM).We find that incorporating a forward model of the circulation-induced magnetic field marginally improves the fit to the data.Furthermore,we demonstrate that neglecting the circulation-induced magnetic field in geomagnetic field modeling results in leakage into the core field model.The highlights of the MGFM model include:(i)a good agreement with the widely used CHAOS model series;(ii)the incorporation of magnetic fields induced by both ocean tides and circulation;and(iii)the suppression of leakage of the circulation-induced magnetic field into the core field model.
