As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalen...As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based sim...To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.展开更多
Software systems are vulnerable to security breaches as they expand in complexity and functionality.The confidentiality,integrity,and availability of data are gravely threatened by flaws in a system’s design,implemen...Software systems are vulnerable to security breaches as they expand in complexity and functionality.The confidentiality,integrity,and availability of data are gravely threatened by flaws in a system’s design,implementation,or configuration.To guarantee the durability&robustness of the software,vulnerability identification and fixation have become crucial areas of focus for developers,cybersecurity experts and industries.This paper presents a thorough multi-phase mathematical model for efficient patch management and vulnerability detection.To uniquely model these processes,the model incorporated the notion of the learning phenomenon in describing vulnerability fixation using a logistic learning function.Furthermore,the authors have used numerical methods to approximate the solution of the proposed framework where an analytical solution is difficult to attain.The suggested systematic architecture has been demonstrated through statistical analysis using patch datasets,which offers a solid basis for the research conclusions.According to computational research,learning dynamics improves security response and results in more effective vulnerability management.The suggested model offers a systematic approach to proactive vulnerability mitigation and has important uses in risk assessment,software maintenance,and cybersecurity.This study helps create more robust software systems by increasing patch management effectiveness,which benefits developers,cybersecurity experts,and sectors looking to reduce security threats in a growing digital world.展开更多
This review paper provides a comprehensive introduction to various numerical methods for the phase-field model used to simulate the phase separation dynamics of diblock copolymer melts.Diblock copolymer systems form c...This review paper provides a comprehensive introduction to various numerical methods for the phase-field model used to simulate the phase separation dynamics of diblock copolymer melts.Diblock copolymer systems form complex structures at the nanometer scale and play a significant role in various applications.The phase-field model,in particular,is essential for describing the formation and evolution of these structures and is widely used as a tool to effectively predict the movement of phase boundaries and the distribution of phases over time.In this paper,we discuss the principles and implementations of various numerical methodologies for this model and analyze the strengths,limitations,stability,accuracy,and computational efficiency of each method.Traditional approaches such as Fourier spectral methods,finite difference methods and alternating direction explicit methods are reviewed,as well as recent advancements such as the invariant energy quadratization method and the scalar auxiliary variable scheme are also presented.In addition,we introduce examples of the phase-field model,which are fingerprint image restoration and 3D printing.These examples demonstrate the extensive applicability of the reviewed methods and models.展开更多
The modeling of crack growth in three-dimensional(3D)space poses significant challenges in rock mechanics due to the complex numerical computation involved in simulating crack propagation and interaction in rock mater...The modeling of crack growth in three-dimensional(3D)space poses significant challenges in rock mechanics due to the complex numerical computation involved in simulating crack propagation and interaction in rock materials.In this study,we present a novel approach that introduces a 3D numerical manifold method(3D-NMM)with a geometric kernel to enhance computational efficiency.Specifically,the maximum tensile stress criterion is adopted as a crack growth criterion to achieve strong discontinuous crack growth,and a local crack tracking algorithm and an angle correction technique are incorporated to address minor limitations of the algorithm in a 3D model.The implementation of the program is carried out in Python,using object-oriented programming in two independent modules:a calculation module and a crack module.Furthermore,we propose feasible improvements to enhance the performance of the algorithm.Finally,we demonstrate the feasibility and effectiveness of the enhanced algorithm in the 3D-NMM using four numerical examples.This study establishes the potential of the 3DNMM,combined with the local tracking algorithm,for accurately modeling 3D crack propagation in brittle rock materials.展开更多
In order to solve the problem of the variable coefficient ordinary differen-tial equation on the bounded domain,the Lagrange interpolation method is used to approximate the exact solution of the equation,and the error...In order to solve the problem of the variable coefficient ordinary differen-tial equation on the bounded domain,the Lagrange interpolation method is used to approximate the exact solution of the equation,and the error between the numerical solution and the exact solution is obtained,and then compared with the error formed by the difference method,it is concluded that the Lagrange interpolation method is more effective in solving the variable coefficient ordinary differential equation.展开更多
As a pyrometallurgical process,circulating fluidized bed(CFB) roasting has good potential for application in desulfurization of high-sulfur bauxite.The gas-solid distribution and reaction during CFB roasting of high-s...As a pyrometallurgical process,circulating fluidized bed(CFB) roasting has good potential for application in desulfurization of high-sulfur bauxite.The gas-solid distribution and reaction during CFB roasting of high-sulfur bauxite were simulated using the computational particle fluid dynamics(CPFD) method.The effect of primary air flow velocity on particle velocity,particle volume distribution,furnace temperature distribution and pressure distribution were investigated.Under the condition of the same total flow of natural gas,the impact of the number of inlets on the desulfurization efficiency,atmosphere mass fraction distribution and temperature distribution in the furnace was further investigated.展开更多
After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir develo...After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir development.Conventional numerical reservoir simulation methodologies typically employ static assumptions for model construction,presuming invariant reservoir geological parameters throughout the development process while neglecting the reservoir’s temporal evolution characteristics.Although such simplifications reduce computational complexity,they introduce substantial descriptive inaccuracies.Therefore,this paper proposes a meshless numerical simulation method for reservoirs that considers time-varying characteristics.This method avoids the meshing in traditional numerical simulation methods.From the fluid flow perspective,the reservoir’s computational domain is discretized into a series of connection units.An influence domain with a certain radius centered on the nodes is selected,and one-dimensional connection units are established between the nodes to achieve the characterization of the flow topology structure of the reservoir.In order to reflect the dynamic evolution of the reservoir’s physical properties during the water injection development process,the time-varying characteristics are incorporated into the formula of the seepage characteristic parameters in the meshless calculation.The change relationship of the permeability under different surface fluxes is considered to update the calculated connection conductivity in real time.By combining with the seepage control equation for solution,a time-varying meshless numerical simulation method is formed.The results show that compared with the numerical simulationmethod of the connection elementmethod(CEM)that only considers static parameters,this method has higher simulation accuracy and can better simulate the real migration and distribution of oil and water in the reservoir.Thismethod improves the accuracy of reservoir numerical simulation and the development effect of oilfields,providing a scientific basis for optimizing the water injection strategy,adjusting the production plan,and extending the effective production cycle of the oilfield.展开更多
This article reviews the application and progress of deep learning in efficient numerical computing methods.Deep learning,as an important branch of machine learning,provides new ideas for numerical computation by cons...This article reviews the application and progress of deep learning in efficient numerical computing methods.Deep learning,as an important branch of machine learning,provides new ideas for numerical computation by constructing multi-layer neural networks to simulate the learning process of the human brain.The article explores the application of deep learning in solving partial differential equations,optimizing problems,and data-driven modeling,and analyzes its advantages in computational efficiency,accuracy,and adaptability.At the same time,this article also points out the challenges faced by deep learning numerical computation methods in terms of computational efficiency,interpretability,and generalization ability,and proposes strategies and future development directions for integrating with traditional numerical methods.展开更多
Deepwater drilling riser is the key equipment connecting the subsea wellhead and floating drilling platform.Due to complex marine environment,vortex-induced vibration(ViV)will be generated on riser,which will induce f...Deepwater drilling riser is the key equipment connecting the subsea wellhead and floating drilling platform.Due to complex marine environment,vortex-induced vibration(ViV)will be generated on riser,which will induce fatigue failure and even cause unpredictable drilling accidents.Therefore,it is important to study the ViV characteristics of deepwater drilling riser and reveal the main controlling factors for ensuring the safe and efficient operation of deepwater drilling engineering.In this paper,the ViV of deepwater drilling riser is numerically simulated in time domain based on the discrete vortex method(DvM).A hydrodynamic analysis model and governing equation of VIV is proposed with considering the effect of riser motion using DVM and slice method,where the governing equation is solved by Runge-Kutta method.Model validation is performed,which verified the correctness and accuracy of the mechanical model and the solution method.On this basis,the influence of the number of control points,current velocity,riser outer diameter,shear flow and top tension on the ViV characteristics of deepwater drilling risers are discussed in detail.The results show that with the increase of current velocity,the vibration amplitude of deepwater drilling riser decreases obviously,while the vibration frequency increases gradually.However,if the outer diameter of riser increases,the vibration amplitude increases,while the vibration frequency decreases gradually.The top tension also has great influence on the VIV of riser.When the top tension is 1.25 G,the VIV is suppressed to a certain extent.This study has guiding significance for optimal design and engineering control of deepwater drilling riser.展开更多
0 INTRODUCTION In recent years,modern railways have been actively under construction in the complex mountainous area of Southwest China.However,rockfall poses a significant threat to both construction and operation ph...0 INTRODUCTION In recent years,modern railways have been actively under construction in the complex mountainous area of Southwest China.However,rockfall poses a significant threat to both construction and operation phases of railway projects(Yan et al.,2023;Chen et al.,2022;Fanos and Pradhan,2018).展开更多
The boundary knot method(BKM)is a simple boundary-type meshless method.Due to the use of non-singular general solutions rather than singular fundamental solutions,BKM does not need to consider the artificial boundary....The boundary knot method(BKM)is a simple boundary-type meshless method.Due to the use of non-singular general solutions rather than singular fundamental solutions,BKM does not need to consider the artificial boundary.Therefore,this method has the merits of purely meshless,easy to program,high solution accuracy and so on.In this paper,we investigate the effectiveness of the BKM for solving Helmholtz-type problems under various conditions through a series of novel numerical experiments.The results demonstrate that the BKM is efficient and achieves high computational accuracy for problems with smooth or continuous boundary conditions.However,when applied to discontinuous boundary problems,the method exhibits significant numerical instability,potentially leading to substantial deviations in the computed results.Finally,three potential improvement strategies are proposed to mitigate this limitation.展开更多
The feasibility of using a problem-dependent method to solve systems of second order ODEs is corroborated by an eigen-based theory and a methodology to develop such a numerical method is constructed.The key steps of t...The feasibility of using a problem-dependent method to solve systems of second order ODEs is corroborated by an eigen-based theory and a methodology to develop such a numerical method is constructed.The key steps of this methodology are to decouple a system of ODEs of second order into a set of uncoupled ODEs of second order;next,an eigen-dependent method is proposed to approximate the solution of each uncoupled ODE of second order.It is vital to transform all eigen-dependent methods to a problem-dependent method to bypass an Eigen analysis.The development of an eigen-dependent method plays a key role in this methodology so that slow eigenmodes can be accurately integrated while there is no instability or excessive amplitude growth in fast eigenmodes.This can explain why a problem-dependent method can simultaneously combine the explicitness of each step and A-stability.Consequently,huge computational efforts can be saved for solving nonlinear stiff problems.A new family of problem-dependent methods is developed in this work so that the feasibility of the proposed methodology can be affirmed.It has almost the same performance as that of the HHT-αmethod.However,it can save more than 99.5%of CPU demand in approximating a solution for a system of 1000 nonlinear second order ODEs.展开更多
Coal underground gasification(UCG)transforms the physical extraction of coal into the chemical extraction of gas,which is effective for exploiting deep coal deposits.Numerical simulation technology for UCG is a crucia...Coal underground gasification(UCG)transforms the physical extraction of coal into the chemical extraction of gas,which is effective for exploiting deep coal deposits.Numerical simulation technology for UCG is a crucial tool for studying the complex processes involved in coal gasification.This study was conducted to determine the direction in which UCG numerical simulation is developing,specifically by reviewing the research progress and achievements made in this area and identifying the existing problems and future research directions.The findings indicate the following:(1)Research has focused on the reaction issues of coal underground gasification,considering mass and heat transfer effects and gasification cavity expansion.Chemical equilibrium,gasification block,packed bed,and gasification channel models have been developed,which have certain advantages in solving gasification reaction problems influenced by cavity structure and reasonable simplifications capable of describing local issues.(2)The dynamic description of gasification cavity structures is a challenging problem that UCG numerical simulation needs to address.The cavity expansion mechanism includes thermochemical consumption,coal spalling,roof collapse,and debris accumulation.Thermochemical consumption causes the mechanical properties of coal and rock to change,leading to spalling under stress.(3)Process models emphasize dynamic simulations of the gasification process,including cavity evolution and gasification products.The reactor combination model,continuous medium equivalent model,and multimodule integration model are primarily used.(4)Future UCG numerical simulation technology development will prioritize modularity,systematization,and intelligence.There is an urgent need to facilitate the chemical reaction kinetics of large coal blocks,the coupling of discontinuous media,and the integration of multifunctional systems,including that of numerical simulation technology with artificial intelligence.With continuous improvements,numerical simulation technology will play a greater technical supporting role in UCG industrialization.展开更多
This study examines the structural responses of a novel articulated foundation wind turbine with compliant structural design under offshore winds,waves,and seismic events.A numerical simulation analysis framework,ADRT...This study examines the structural responses of a novel articulated foundation wind turbine with compliant structural design under offshore winds,waves,and seismic events.A numerical simulation analysis framework,ADRT(Articulated Foundation Offshore Wind Turbine Dynamic Analysis and Response Prediction Tool),has been developed and validated through benchmark studies with established numerical tools,demonstrating strong correlation.The research conducts dynamic response analysis of the Articulated Foundation Offshore Wind Turbine(AFOWT)system under various seismic scenarios.Analysis reveals that response amplitude increases proportionally with seismic intensity.When wind and seismic forces act simultaneously,the system's response amplitude perpendicular to the rotor plane decreases compared with isolated seismic action,attributed to aerodynamic damping effects,except for blade deformation response.During emergency braking shutdown operations triggered by seismic excitation,the structural seismic response exceeds design safety thresholds during the shutdown feathering process,indicating that emergency shutdown procedures do not effectively mitigate the system's structural response.展开更多
Shale gas reservoirs have large burial depths,thin thickness,and low resistance,which lead to problems with weak surface observation,abnormal information,and multiple inversion solutions.The traditional electromagneti...Shale gas reservoirs have large burial depths,thin thickness,and low resistance,which lead to problems with weak surface observation,abnormal information,and multiple inversion solutions.The traditional electromagnetic method cannot effectively identify information from deep,low-resistance thin layers in terms of detection depth and accuracy.Wide field electromagnetic method(WFEM)with large depth and high precision has become the main method for deep earth exploration.This method has been widely used in the exploration of deep oil and gas energy,as well as mineral resources.However,an in-depth analysis of the various factors that affect the deep detection ability of WFEM is lacking.Therefore,the analysis of system parameters has significant theoretical importance and practical value for studying the effectiveness of WFEM in deep-layer identification.In this study,a multilayer geoelectric model is established in this study using the measured well data.The influence characteristics of different observation system parameters on the resolution of specific deep-seated targets under the WFEM_E-Ex mode are analyzed in detail through forward modeling and inversion.Results show that the resolution ability of WFEM for deep,low-resistance thin layers is affected by factors such as transceiver distance,target layer thickness,and resistivity difference between the target body and the surrounding rock,but the influence range differs.This study analyzes the influence characteristics of various system parameters.It provides targeted work scheme design and feasibility analysis for deep shale gas exploration.It also offers an important theoretical basis for optimizing construction schemes and improving the recognition ability of WFEM for deep,low-resistance targets.展开更多
The uplift resistance of the soil overlying shield tunnels significantly impacts their anti-floating stability.However,research on uplift resistance concerning special-shaped shield tunnels is limited.This study combi...The uplift resistance of the soil overlying shield tunnels significantly impacts their anti-floating stability.However,research on uplift resistance concerning special-shaped shield tunnels is limited.This study combines numerical simulation with machine learning techniques to explore this issue.It presents a summary of special-shaped tunnel geometries and introduces a shape coefficient.Through the finite element software,Plaxis3D,the study simulates six key parameters—shape coefficient,burial depth ratio,tunnel’s longest horizontal length,internal friction angle,cohesion,and soil submerged bulk density—that impact uplift resistance across different conditions.Employing XGBoost and ANN methods,the feature importance of each parameter was analyzed based on the numerical simulation results.The findings demonstrate that a tunnel shape more closely resembling a circle leads to reduced uplift resistance in the overlying soil,whereas other parameters exhibit the contrary effects.Furthermore,the study reveals a diminishing trend in the feature importance of buried depth ratio,internal friction angle,tunnel longest horizontal length,cohesion,soil submerged bulk density,and shape coefficient in influencing uplift resistance.展开更多
In this work, an efficient spectral method is proposed to solve the fourth-order eigenvalue problem in cylinder domain. Firstly, the key point of this method is to decompose the original model into a kind of decoupled...In this work, an efficient spectral method is proposed to solve the fourth-order eigenvalue problem in cylinder domain. Firstly, the key point of this method is to decompose the original model into a kind of decoupled two-dimensional eigenvalue problem by cylindrical coordinate transformation and Fourier series expansion, and deduce the crucial essential pole conditions. Secondly, we define a kind of weighted Sobolev spaces, and establish a suitable variational formula and its discrete form for each two-dimensional eigenvalue problem. Furthermore, we derive the equivalent operator formulas and obtain some prior error estimates of spectral theory of compact operators. More importantly, we further obtained error estimates for approximating eigenvalues and eigenfunctions by using two newly constructed projection operators. Finally,some numerical experiments are performed to validate our theoretical results and algorithm.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.12272393 and 52130905).
文摘As binary geological media,soil-rock mixtures(SRMs)exhibit a distinct gradational composition,leading to their unique mechanical behaviors.To appraise the stability of SRM slopes,it is essential to determine equivalent parameters of SRMs,which are typically obtained through experimental and numerical methods.In contrasted to other numerical methods,the numerical manifold method(NMM)is more effective in addressing SRM problems.This is because the high-precision regular mathematical meshes in NMM can be used without aligning with the soil-rock interfaces and boundaries of SRMs.In the current research,the equivalent strength parameters of SRMs,i.e.the equivalent cohesion ce and internal friction angleϕ_(e),are determined using NMM.Initially,an NMM triaxial numerical model is established and validated based on triaxial experiments.Subsequently,the soil and rock parameters are derived through parameter inversion.Moreover,the impacts of rock content,size,shape and rock blocks'major-axis orientation on ce andϕ_(e) of SRMs are thoroughly examined using the NMM triaxial numerical model.Additionally,a fitting function is proposed to linkϕ_(e) to the rock content and size of SRMs.When other influencing factors are fixed,the above fitting model leads to the following conclusions:(1)the predictedϕ_(e) of SRMs increase with the increase of rock content;and(2)SRM samples with smaller rocks display a higher predictedϕ_(e).
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52271317 and 52071149)the Fundamental Research Funds for the Central Universities(HUST:2019kfy XJJS007)。
文摘To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.
基金supported by grants received by the first author and third author from the Institute of Eminence,Delhi University,Delhi,India,as part of the Faculty Research Program via Ref.No./IoE/2024-25/12/FRP.
文摘Software systems are vulnerable to security breaches as they expand in complexity and functionality.The confidentiality,integrity,and availability of data are gravely threatened by flaws in a system’s design,implementation,or configuration.To guarantee the durability&robustness of the software,vulnerability identification and fixation have become crucial areas of focus for developers,cybersecurity experts and industries.This paper presents a thorough multi-phase mathematical model for efficient patch management and vulnerability detection.To uniquely model these processes,the model incorporated the notion of the learning phenomenon in describing vulnerability fixation using a logistic learning function.Furthermore,the authors have used numerical methods to approximate the solution of the proposed framework where an analytical solution is difficult to attain.The suggested systematic architecture has been demonstrated through statistical analysis using patch datasets,which offers a solid basis for the research conclusions.According to computational research,learning dynamics improves security response and results in more effective vulnerability management.The suggested model offers a systematic approach to proactive vulnerability mitigation and has important uses in risk assessment,software maintenance,and cybersecurity.This study helps create more robust software systems by increasing patch management effectiveness,which benefits developers,cybersecurity experts,and sectors looking to reduce security threats in a growing digital world.
文摘This review paper provides a comprehensive introduction to various numerical methods for the phase-field model used to simulate the phase separation dynamics of diblock copolymer melts.Diblock copolymer systems form complex structures at the nanometer scale and play a significant role in various applications.The phase-field model,in particular,is essential for describing the formation and evolution of these structures and is widely used as a tool to effectively predict the movement of phase boundaries and the distribution of phases over time.In this paper,we discuss the principles and implementations of various numerical methodologies for this model and analyze the strengths,limitations,stability,accuracy,and computational efficiency of each method.Traditional approaches such as Fourier spectral methods,finite difference methods and alternating direction explicit methods are reviewed,as well as recent advancements such as the invariant energy quadratization method and the scalar auxiliary variable scheme are also presented.In addition,we introduce examples of the phase-field model,which are fingerprint image restoration and 3D printing.These examples demonstrate the extensive applicability of the reviewed methods and models.
基金supported by the National Natural Science Foundation of China(Grant Nos.42172312 and 52211540395)support from the Institut Universitaire de France(IUF).
文摘The modeling of crack growth in three-dimensional(3D)space poses significant challenges in rock mechanics due to the complex numerical computation involved in simulating crack propagation and interaction in rock materials.In this study,we present a novel approach that introduces a 3D numerical manifold method(3D-NMM)with a geometric kernel to enhance computational efficiency.Specifically,the maximum tensile stress criterion is adopted as a crack growth criterion to achieve strong discontinuous crack growth,and a local crack tracking algorithm and an angle correction technique are incorporated to address minor limitations of the algorithm in a 3D model.The implementation of the program is carried out in Python,using object-oriented programming in two independent modules:a calculation module and a crack module.Furthermore,we propose feasible improvements to enhance the performance of the algorithm.Finally,we demonstrate the feasibility and effectiveness of the enhanced algorithm in the 3D-NMM using four numerical examples.This study establishes the potential of the 3DNMM,combined with the local tracking algorithm,for accurately modeling 3D crack propagation in brittle rock materials.
文摘In order to solve the problem of the variable coefficient ordinary differen-tial equation on the bounded domain,the Lagrange interpolation method is used to approximate the exact solution of the equation,and the error between the numerical solution and the exact solution is obtained,and then compared with the error formed by the difference method,it is concluded that the Lagrange interpolation method is more effective in solving the variable coefficient ordinary differential equation.
基金supported by the National Key Research and Development Program of China(2022YFC2904400)Guangxi Science and Technology Major Project(Gui Ke AA23023033)。
文摘As a pyrometallurgical process,circulating fluidized bed(CFB) roasting has good potential for application in desulfurization of high-sulfur bauxite.The gas-solid distribution and reaction during CFB roasting of high-sulfur bauxite were simulated using the computational particle fluid dynamics(CPFD) method.The effect of primary air flow velocity on particle velocity,particle volume distribution,furnace temperature distribution and pressure distribution were investigated.Under the condition of the same total flow of natural gas,the impact of the number of inlets on the desulfurization efficiency,atmosphere mass fraction distribution and temperature distribution in the furnace was further investigated.
基金funded by the 14th Five-Year Plan Major Science and Technology Project of CNOOC project number KJGG2021-0506.
文摘After a long period of water flooding development,the oilfield has entered the middle and high water cut stage.The physical properties of reservoirs are changed by water erosion,which directly impacts reservoir development.Conventional numerical reservoir simulation methodologies typically employ static assumptions for model construction,presuming invariant reservoir geological parameters throughout the development process while neglecting the reservoir’s temporal evolution characteristics.Although such simplifications reduce computational complexity,they introduce substantial descriptive inaccuracies.Therefore,this paper proposes a meshless numerical simulation method for reservoirs that considers time-varying characteristics.This method avoids the meshing in traditional numerical simulation methods.From the fluid flow perspective,the reservoir’s computational domain is discretized into a series of connection units.An influence domain with a certain radius centered on the nodes is selected,and one-dimensional connection units are established between the nodes to achieve the characterization of the flow topology structure of the reservoir.In order to reflect the dynamic evolution of the reservoir’s physical properties during the water injection development process,the time-varying characteristics are incorporated into the formula of the seepage characteristic parameters in the meshless calculation.The change relationship of the permeability under different surface fluxes is considered to update the calculated connection conductivity in real time.By combining with the seepage control equation for solution,a time-varying meshless numerical simulation method is formed.The results show that compared with the numerical simulationmethod of the connection elementmethod(CEM)that only considers static parameters,this method has higher simulation accuracy and can better simulate the real migration and distribution of oil and water in the reservoir.Thismethod improves the accuracy of reservoir numerical simulation and the development effect of oilfields,providing a scientific basis for optimizing the water injection strategy,adjusting the production plan,and extending the effective production cycle of the oilfield.
文摘This article reviews the application and progress of deep learning in efficient numerical computing methods.Deep learning,as an important branch of machine learning,provides new ideas for numerical computation by constructing multi-layer neural networks to simulate the learning process of the human brain.The article explores the application of deep learning in solving partial differential equations,optimizing problems,and data-driven modeling,and analyzes its advantages in computational efficiency,accuracy,and adaptability.At the same time,this article also points out the challenges faced by deep learning numerical computation methods in terms of computational efficiency,interpretability,and generalization ability,and proposes strategies and future development directions for integrating with traditional numerical methods.
基金the financial support from National Key R&D Program of China(Grant number:2024YFC2815100)Natural Science Foundation of China(Grant number:52322110)Beijing Nova Program(Grant number:20230484341).
文摘Deepwater drilling riser is the key equipment connecting the subsea wellhead and floating drilling platform.Due to complex marine environment,vortex-induced vibration(ViV)will be generated on riser,which will induce fatigue failure and even cause unpredictable drilling accidents.Therefore,it is important to study the ViV characteristics of deepwater drilling riser and reveal the main controlling factors for ensuring the safe and efficient operation of deepwater drilling engineering.In this paper,the ViV of deepwater drilling riser is numerically simulated in time domain based on the discrete vortex method(DvM).A hydrodynamic analysis model and governing equation of VIV is proposed with considering the effect of riser motion using DVM and slice method,where the governing equation is solved by Runge-Kutta method.Model validation is performed,which verified the correctness and accuracy of the mechanical model and the solution method.On this basis,the influence of the number of control points,current velocity,riser outer diameter,shear flow and top tension on the ViV characteristics of deepwater drilling risers are discussed in detail.The results show that with the increase of current velocity,the vibration amplitude of deepwater drilling riser decreases obviously,while the vibration frequency increases gradually.However,if the outer diameter of riser increases,the vibration amplitude increases,while the vibration frequency decreases gradually.The top tension also has great influence on the VIV of riser.When the top tension is 1.25 G,the VIV is suppressed to a certain extent.This study has guiding significance for optimal design and engineering control of deepwater drilling riser.
基金supported by the Open Research Fund of Key Laboratory of Geological Hazards on Three Gorges Reservoir Area(China Three Gorges University),Ministry of Education(No.2022KDZ03)the Science and Technology Projects of Yunnan Provincial Science and Technology Department(No.202401AT070328)+1 种基金the Young talents project of“Xingdian Talent Support Program”in Yunnan Province(No.YNWR-QNBJ-2020-019)the Fund Project of China Academy of Railway Sciences Co.,Ltd.(No.2021YJ178)。
文摘0 INTRODUCTION In recent years,modern railways have been actively under construction in the complex mountainous area of Southwest China.However,rockfall poses a significant threat to both construction and operation phases of railway projects(Yan et al.,2023;Chen et al.,2022;Fanos and Pradhan,2018).
基金Supported by the Key Scientific Research Plan of Colleges and Universities in Henan Province(23B140006)。
文摘The boundary knot method(BKM)is a simple boundary-type meshless method.Due to the use of non-singular general solutions rather than singular fundamental solutions,BKM does not need to consider the artificial boundary.Therefore,this method has the merits of purely meshless,easy to program,high solution accuracy and so on.In this paper,we investigate the effectiveness of the BKM for solving Helmholtz-type problems under various conditions through a series of novel numerical experiments.The results demonstrate that the BKM is efficient and achieves high computational accuracy for problems with smooth or continuous boundary conditions.However,when applied to discontinuous boundary problems,the method exhibits significant numerical instability,potentially leading to substantial deviations in the computed results.Finally,three potential improvement strategies are proposed to mitigate this limitation.
文摘The feasibility of using a problem-dependent method to solve systems of second order ODEs is corroborated by an eigen-based theory and a methodology to develop such a numerical method is constructed.The key steps of this methodology are to decouple a system of ODEs of second order into a set of uncoupled ODEs of second order;next,an eigen-dependent method is proposed to approximate the solution of each uncoupled ODE of second order.It is vital to transform all eigen-dependent methods to a problem-dependent method to bypass an Eigen analysis.The development of an eigen-dependent method plays a key role in this methodology so that slow eigenmodes can be accurately integrated while there is no instability or excessive amplitude growth in fast eigenmodes.This can explain why a problem-dependent method can simultaneously combine the explicitness of each step and A-stability.Consequently,huge computational efforts can be saved for solving nonlinear stiff problems.A new family of problem-dependent methods is developed in this work so that the feasibility of the proposed methodology can be affirmed.It has almost the same performance as that of the HHT-αmethod.However,it can save more than 99.5%of CPU demand in approximating a solution for a system of 1000 nonlinear second order ODEs.
基金supported by Natural Science Research Project of Yangzhou University Guangling College,China(Grant No.ZKZD25002)Youth Science and Technology Special Project of PetroChina(Grant No.2024DQ03221)Basic Research Project of Institute Research Institute of Exploration and Development,PetroChina(Grant No.101001cq0b52394).
文摘Coal underground gasification(UCG)transforms the physical extraction of coal into the chemical extraction of gas,which is effective for exploiting deep coal deposits.Numerical simulation technology for UCG is a crucial tool for studying the complex processes involved in coal gasification.This study was conducted to determine the direction in which UCG numerical simulation is developing,specifically by reviewing the research progress and achievements made in this area and identifying the existing problems and future research directions.The findings indicate the following:(1)Research has focused on the reaction issues of coal underground gasification,considering mass and heat transfer effects and gasification cavity expansion.Chemical equilibrium,gasification block,packed bed,and gasification channel models have been developed,which have certain advantages in solving gasification reaction problems influenced by cavity structure and reasonable simplifications capable of describing local issues.(2)The dynamic description of gasification cavity structures is a challenging problem that UCG numerical simulation needs to address.The cavity expansion mechanism includes thermochemical consumption,coal spalling,roof collapse,and debris accumulation.Thermochemical consumption causes the mechanical properties of coal and rock to change,leading to spalling under stress.(3)Process models emphasize dynamic simulations of the gasification process,including cavity evolution and gasification products.The reactor combination model,continuous medium equivalent model,and multimodule integration model are primarily used.(4)Future UCG numerical simulation technology development will prioritize modularity,systematization,and intelligence.There is an urgent need to facilitate the chemical reaction kinetics of large coal blocks,the coupling of discontinuous media,and the integration of multifunctional systems,including that of numerical simulation technology with artificial intelligence.With continuous improvements,numerical simulation technology will play a greater technical supporting role in UCG industrialization.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.42506226 and 52301321)the Natural Science Foundation of Jiangsu Province(Grant Nos.BK20251032,BK20230669 and BK20231255)。
文摘This study examines the structural responses of a novel articulated foundation wind turbine with compliant structural design under offshore winds,waves,and seismic events.A numerical simulation analysis framework,ADRT(Articulated Foundation Offshore Wind Turbine Dynamic Analysis and Response Prediction Tool),has been developed and validated through benchmark studies with established numerical tools,demonstrating strong correlation.The research conducts dynamic response analysis of the Articulated Foundation Offshore Wind Turbine(AFOWT)system under various seismic scenarios.Analysis reveals that response amplitude increases proportionally with seismic intensity.When wind and seismic forces act simultaneously,the system's response amplitude perpendicular to the rotor plane decreases compared with isolated seismic action,attributed to aerodynamic damping effects,except for blade deformation response.During emergency braking shutdown operations triggered by seismic excitation,the structural seismic response exceeds design safety thresholds during the shutdown feathering process,indicating that emergency shutdown procedures do not effectively mitigate the system's structural response.
基金supported by the Jingdezhen Science and Technology Plan Project(No.20234SF005)the Jingdezhen University Science and Technology Project(No.2023xjkt-02).
文摘Shale gas reservoirs have large burial depths,thin thickness,and low resistance,which lead to problems with weak surface observation,abnormal information,and multiple inversion solutions.The traditional electromagnetic method cannot effectively identify information from deep,low-resistance thin layers in terms of detection depth and accuracy.Wide field electromagnetic method(WFEM)with large depth and high precision has become the main method for deep earth exploration.This method has been widely used in the exploration of deep oil and gas energy,as well as mineral resources.However,an in-depth analysis of the various factors that affect the deep detection ability of WFEM is lacking.Therefore,the analysis of system parameters has significant theoretical importance and practical value for studying the effectiveness of WFEM in deep-layer identification.In this study,a multilayer geoelectric model is established in this study using the measured well data.The influence characteristics of different observation system parameters on the resolution of specific deep-seated targets under the WFEM_E-Ex mode are analyzed in detail through forward modeling and inversion.Results show that the resolution ability of WFEM for deep,low-resistance thin layers is affected by factors such as transceiver distance,target layer thickness,and resistivity difference between the target body and the surrounding rock,but the influence range differs.This study analyzes the influence characteristics of various system parameters.It provides targeted work scheme design and feasibility analysis for deep shale gas exploration.It also offers an important theoretical basis for optimizing construction schemes and improving the recognition ability of WFEM for deep,low-resistance targets.
基金Guangzhou Metro Scientific Research Project(No.JT204-100111-23001)Chongqing Municipal Special Project for Technological Innovation and Application Development(No.CSTB2022TIAD-KPX0101)Science and Technology Research and Development Program of China State Railway Group Co.,Ltd.(No.N2023G045)。
文摘The uplift resistance of the soil overlying shield tunnels significantly impacts their anti-floating stability.However,research on uplift resistance concerning special-shaped shield tunnels is limited.This study combines numerical simulation with machine learning techniques to explore this issue.It presents a summary of special-shaped tunnel geometries and introduces a shape coefficient.Through the finite element software,Plaxis3D,the study simulates six key parameters—shape coefficient,burial depth ratio,tunnel’s longest horizontal length,internal friction angle,cohesion,and soil submerged bulk density—that impact uplift resistance across different conditions.Employing XGBoost and ANN methods,the feature importance of each parameter was analyzed based on the numerical simulation results.The findings demonstrate that a tunnel shape more closely resembling a circle leads to reduced uplift resistance in the overlying soil,whereas other parameters exhibit the contrary effects.Furthermore,the study reveals a diminishing trend in the feature importance of buried depth ratio,internal friction angle,tunnel longest horizontal length,cohesion,soil submerged bulk density,and shape coefficient in influencing uplift resistance.
基金Supported by the National Natural Science Foundation of China(Grant No.12261017)the Scientific Research Foundation of Guizhou University of Finance and Economics(Grant No.2022ZCZX077)。
文摘In this work, an efficient spectral method is proposed to solve the fourth-order eigenvalue problem in cylinder domain. Firstly, the key point of this method is to decompose the original model into a kind of decoupled two-dimensional eigenvalue problem by cylindrical coordinate transformation and Fourier series expansion, and deduce the crucial essential pole conditions. Secondly, we define a kind of weighted Sobolev spaces, and establish a suitable variational formula and its discrete form for each two-dimensional eigenvalue problem. Furthermore, we derive the equivalent operator formulas and obtain some prior error estimates of spectral theory of compact operators. More importantly, we further obtained error estimates for approximating eigenvalues and eigenfunctions by using two newly constructed projection operators. Finally,some numerical experiments are performed to validate our theoretical results and algorithm.
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
