Population growth and expanding urbanization have caused persistent shortages and contamination of groundwater resources in Mali,Africa.The increase in groundwater salinity makes it more difficult for residents to obt...Population growth and expanding urbanization have caused persistent shortages and contamination of groundwater resources in Mali,Africa.The increase in groundwater salinity makes it more difficult for residents to obtain drinking water,it is necessary to clarify the causes and control factors of groundwater mineralization in Gao region,northern Mali.Based on the analysis of the hydrochemical composition of groundwater in 24 boreholes,Piper and Sch?eller diagrams,principal component analysis(PCA)and hierarchical cluster analysis(HCA)are used to carry out multivariate statistical analysis on the main ions.The results show that the groundwater samples are weakly alkaline,with pH values ranging from 5.83 to 8.40,and the average values of boreholes are 7.50,respectively.The average electrical conductivity(EC)value is 354.4(μS/cm),and the extreme value is between 124.0 and 1247(μS/cm).Water is usually mineralized and presents nine types of water phase.The three principal components explain 84.42%of the total variance for 13 parameters.The factor F1(58.85%),the factor F2(16.88%)and the factor F3(8.69%)present for the majority of the total data set.In addition,multivariate statistical analysis confirmed the genetic relationship among aquifers and identified three main clusters.Clustering related to groundwater mineralization(F1),clustering related to oxide reduction and iron enrichment(F2),and clustering of groundwater pollution caused by nitrate and magnesium(F3).We found that agriculture,weathering activities and dissolution of geological materials promote the mineralization of groundwater.Groundwater quality in the Gao region is becoming less and less potable because of increasing salinity.展开更多
Three-point bending fatigue experiments were conducted on a typical Zr-based bulk metallic glass(BMG)at ambient temperature to investigate the fatigue behavior under cyclic loading conditions.Results show that the str...Three-point bending fatigue experiments were conducted on a typical Zr-based bulk metallic glass(BMG)at ambient temperature to investigate the fatigue behavior under cyclic loading conditions.Results show that the stress amplitude-cycles to failure(S-N)curve of the Zr-based BMG is determined,and the fatigue endurance limit is 442 MPa(stress amplitude).To evaluate the probability-stress amplitude-cycles to failure(P-S-N)curve,an estimation method based on maximum likelihood was proposed,which relies on statistical principles to estimate the fatigue life of the material and allows for a reduction in the number of samples required,offering a cost-effective and efficient alternative to traditional testing methods.The experimental results align with the American Society for Testing and Materials(ASTM)standard,indicating the reliability and accuracy of this estimation method in evaluating the fatigue behavior of Zr-based BMG.展开更多
This study focuses on designing a solution to the perennial issue of clothing fit in Fashion Industry using tools offered by digital technology and statistical analysis, in particular, the data gathered on Asian women...This study focuses on designing a solution to the perennial issue of clothing fit in Fashion Industry using tools offered by digital technology and statistical analysis, in particular, the data gathered on Asian women (Bangladeshi and Chinese). The study reveals that managing information can significantly enhance the capability of the industry to cater to the needs of its consumers and increase diversity. It centers on the effectiveness of turning dressmaking patterns into digital ones, thus transecting from traditional cutting and stitching to remote techniques. This entails the requirement to have correct self-measures and probable errors, which can arise in the process. Thus, with the help of regression analysis, the study identifies, which measurements are incorrect and influence the fit of the clothes, and, therefore, digital pattern creation is more accurate. Altogether, it can be observed how digitalization and statistical methods are crucial to transforming the way clothes are created to approach an ideal standard of measurements that fulfill every customer’s needs to make operational and efficient the clothing sector.展开更多
Statistical Energy Analysis(SEA) is one of the conventional tools for predicting vehicle high-frequency acoustic responses.This study proposes a new method that can provide customized optimization solutions to meet NV...Statistical Energy Analysis(SEA) is one of the conventional tools for predicting vehicle high-frequency acoustic responses.This study proposes a new method that can provide customized optimization solutions to meet NVH targets based on the specific needs of different project teams during the initial project stages.This approach innovatively integrates dynamic optimization,Radial Basis Function(RBF),and Fuzzy Design Variables Genetic Algorithm(FDVGA) into the optimization process of Statistical Energy Analysis(SEA),and also takes vehicle sheet metal into account in the optimization of sound packages.In the implementation process,a correlation model is established through Python scripts to link material density with acoustic parameters,weight,and cost.By combining Optimus and VaOne software,an optimization design workflow is constructed and the optimization design process is successfully executed.Under various constraints related to acoustic performance,weight and cost,a globally optimal design is achieved.This technology has been effectively applied in the field of Battery Electric Vehicle(BEV).展开更多
The Okiep Copper District is the oldest mining district in South Africa with a legacy of more than 150 years of mining.This legacy can be felt in the presence of large tailings dams scattered throughout the area.These...The Okiep Copper District is the oldest mining district in South Africa with a legacy of more than 150 years of mining.This legacy can be felt in the presence of large tailings dams scattered throughout the area.These tailings have a deleterious impact on the surrounding environment.To use geochemical methods in determining the scale of the impact, pre-mining background levels need to be determined. This is especially difficult in areas for which展开更多
[Objective] The study aimed to compare several statistical analysis models for estimating the sugarcane （Saccharum spp.） genotypic stability. [Method] The data of sugarcane regional trials in Guangdong, in 2009 was ...[Objective] The study aimed to compare several statistical analysis models for estimating the sugarcane （Saccharum spp.） genotypic stability. [Method] The data of sugarcane regional trials in Guangdong, in 2009 was analyzed by three models respectively： Finlay and Wilkinson model： the additive main effects and multiplicative interaction （AMMI） model and linear regression-principal components analysis （LR- PCA） model, so as to compare the models. [Result] The Finlay and Wilkinson model was easier, but the analysis of the other two models was more comprehensive, and there was a bit difference between the additive main effects and multiplicative inter- action （AMMI） model and linear regression-principal components analysis （LR-PCA） model. [Conclusion] In practice, while the proper statistical method was usually con- sidered according to the different data, it should be also considered that the same data should be analyzed with different statistical methods in order to get a more reasonable result by comparison.展开更多
Based on tidal data statistical analysis for 20 years of Tanggu Marine Environmental Monitoring Station from 1991 to 2010, we concluded that an average of nearly 10 days of 100 cm above water increase took place at Ti...Based on tidal data statistical analysis for 20 years of Tanggu Marine Environmental Monitoring Station from 1991 to 2010, we concluded that an average of nearly 10 days of 100 cm above water increase took place at Tianjin coast every year. The maximum high tide and average tide of Tianjin coast occurred in summer and autumn, and the maximum water increase also occurred in summer and autumn. Days with water increase more than 100 cm mostly occurred in spring, autumn and winter. Then we summarized the causes of coastal storm surge disaster in Tianjin based on astronomical tide factors, meteorological factors, sea level rise, land subsidence, and geographic factors, et al. Finally, we proposed storm surge disaster prevention measures.展开更多
The neutron capture resonance parameters for 159Tb are crucial for validating nuclear models,nucleosynthesis during the neutron capture process,and nuclear technology applications.In this study,resonance analyses were...The neutron capture resonance parameters for 159Tb are crucial for validating nuclear models,nucleosynthesis during the neutron capture process,and nuclear technology applications.In this study,resonance analyses were performed for the neutron capture cross sections of 159Tb measured at the China Spallation Neutron Source(CSNS)backscattering white neutron beamline(Back-n)facility.The resonance parameters were extracted from the R-Matrix code SAMMY and fitted to the experimental capture yield up to the 1.2 keV resolved resonance region(RRR).The average resonance parameters were determined by performing statistical analysis on the set of the resonance parameters in the RRR.These results were used to fit the measured average capture cross sections using the FITACS code in the unresolved resonance region from 2 keV to 1 MeV.The contributions of partial waves l=0,1,2 to the average capture cross sections are reported.展开更多
[Objectives]To study the factors influencing the tourism economy in Henan Province.[Methods]Using tourism-related data from Henan Province covering the period from 2000 to 2020,this study constructs a regression model...[Objectives]To study the factors influencing the tourism economy in Henan Province.[Methods]Using tourism-related data from Henan Province covering the period from 2000 to 2020,this study constructs a regression model based on multivariate statistical methods to investigate the determinants of the tourism economy.The dependent variable in the model is the domestic tourism revenue of Henan Province,while the independent variables comprise the number of tourist arrivals,total operational railway mileage,the number of travel agencies,and the per capita disposable income of urban residents.[Results]Both the total railway mileage and the per capita disposable income of urban residents are the primary factors influencing the development of Henan's tourism economy.[Conclusions]It is recommended to reduce uncertainty and liquidity constraints to mitigate residents'precautionary savings behavior,actively expand domestic demand to leverage tourism as an economic driver,and improve infrastructure to support tourism development.展开更多
BACKGROUND Meta-analysis is a critical tool in evidence-based medicine,particularly in cardiology,where it synthesizes data from multiple studies to inform clinical decisions.This study explored the potential of using...BACKGROUND Meta-analysis is a critical tool in evidence-based medicine,particularly in cardiology,where it synthesizes data from multiple studies to inform clinical decisions.This study explored the potential of using ChatGPT to streamline and enhance the meta-analysis process.AIM To investigate the potential of ChatGPT to conduct meta-analyses in interventional cardiology by comparing the results of ChatGPT-generated analyses with those of randomly selected,human-conducted meta-analyses on the same topic.METHODS We systematically searched PubMed for meta-analyses on interventional cardiology published in 2024.Five metaanalyses were randomly chosen.ChatGPT 4.0 was used to perform meta-analyses on the extracted data.We compared the results from ChatGPT with the original meta-analyses,focusing on key effect sizes,such as risk ratios(RR),hazard ratios,and odds ratios,along with their confidence intervals(CI)and P values.RESULTS The ChatGPT results showed high concordance with those of the original meta-analyses.For most outcomes,the effect measures and P values generated by ChatGPT closely matched those of the original studies,except for the RR of stent thrombosis in the Sreenivasan et al study,where ChatGPT reported a non-significant effect size,while the original study found it to be statistically significant.While minor discrepancies were observed in specific CI and P values,these differences did not alter the overall conclusions drawn from the analyses.CONCLUSION Our findings suggest the potential of ChatGPT in conducting meta-analyses in interventional cardiology.However,further research is needed to address the limitations of transparency and potential data quality issues,ensuring that AI-generated analyses are robust and trustworthy for clinical decision-making.展开更多
Multi-angle statistical analysis of tropical cyclones(TCs)and their distant thermodynamic disturbances over Northwest Pacific from July to September during 2001-2020 was conducted.The results show that TCs could trigg...Multi-angle statistical analysis of tropical cyclones(TCs)and their distant thermodynamic disturbances over Northwest Pacific from July to September during 2001-2020 was conducted.The results show that TCs could trigger distant thermodynamic disturbances,which mainly caused an increase in air pressure and a rise in temperature in northern China.The distant thermodynamic disturbances triggered by TCs differed in spatial distribution and intensity in different months.In the same month,the spatial distribution of such disturbances triggered by high-intensity TCs was consistent with the overall pattern,and there was a significant increase in intensity and area.From the probability of TC activities and the significance test of variance of analysis under different levels of P-J index,it is found that TC activities could stimulate the increase of P-J teleconnection index.There was a significant positive correlation between them,which was accompanied by a step effect.展开更多
Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently d...Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.展开更多
The use of statistics has received increasing attention in the studies of linguistics and applied linguistics. However,due to its complexity and preciseness,there are many problems of application of statistics. The pr...The use of statistics has received increasing attention in the studies of linguistics and applied linguistics. However,due to its complexity and preciseness,there are many problems of application of statistics. The present paper tries to discuss the application of statistics in a M.A. dissertation and aims to explain how to apply statistics to linguistics research normatively,scientifically,and precisely.展开更多
Understanding the controlling factor of groundwater quality can enhance promoting sustainable development of groundwater resources. To this end, multivariate statistical analysis（MA） and hydrochemical analysis were ...Understanding the controlling factor of groundwater quality can enhance promoting sustainable development of groundwater resources. To this end, multivariate statistical analysis（MA） and hydrochemical analysis were introduced in this work. The results indicate that the canonical discriminant function with 7 parameters was established using the discriminant analysis（DA） method, which can afford 100% correct assignation according to the 3 different clusters（good water（GW）, poor water（PW）, and very poor water（VPW）） obtained from cluster analysis（CA）. According to factor analysis（FA）, 8 factors were extracted from 25 hydrochemical elements and account for 80.897% of the total data variance, suggesting that groundwater with higher concentrations of sodium, calcium, magnesium, chloride, and sulfate in southeastern study area are mainly affected by the natural process; the higher level of arsenic and chromium in groundwater extracted from northwestern part of study area are derived by industrial activities; domestic and agriculture sewage have important contribution to copper, iron, iodine, and phosphate in the northern study area. Therefore, this work can help identify the main controlling factor of groundwater quality in North China plain so as to make better and more informed decisions about how to achieve groundwater resources sustainable development.展开更多
How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interio...How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis （SEA） model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics （CFD） and sensitivity analysis of acoustic contribution.展开更多
Based on the Tropical Cyclone(TC briefly thereafter)Yearbook 1980-2009,this paper first analyzes the number and intensity change of the TCs which passed directly over or by the side of Poyang Lake(the distance of TC c...Based on the Tropical Cyclone(TC briefly thereafter)Yearbook 1980-2009,this paper first analyzes the number and intensity change of the TCs which passed directly over or by the side of Poyang Lake(the distance of TC center is less than 1°longitude or 1°latitude from the Lake)among all the landfalling TCs in China during the past 30 years.Two cases are examined in detail in this paper.One is severe typhoon Rananim with a speed of 3.26 m/s and a change of 1 hPa in intensity when it was passing the Lake.The other is super typhoon Saomai with a faster moving speed of 6.50 m/s and a larger change in intensity of 6 hPa.Through numerical simulation experiments,this paper analyzes how the change of underlying surface from water to land contributes to the differences in intensity,speed and mesoscale convection of the two TCs when they passed the Lake.Results show that the moisture and dynamic condition above the Lake were favorable for the maintenance of the intensity when Rananim was passing through Poyang Lake,despite the moisture supply from the ocean was cut off.As a result,there was strong convection around the lake which led to a rainfall spinning counter-clockwise as it was affected by the TC movement.However,little impact was seen in the Saomai case.These results indicate that for the TCs coming ashore on Poyang Lake with a slow speed,the large water body is conducive to the sustaining of the intensity and strengthening of the convection around the TC center and the subsequent heavy rainfall.On the contrary,a fast-moving TC is less likely to be influenced by the underlying surface in terms of intensity and speed.展开更多
This paper summarizes a few spatial statistical analysis methods for to measuring spatial autocorrelation and spatial association, discusses the criteria for the identification of spatial association by the use of glo...This paper summarizes a few spatial statistical analysis methods for to measuring spatial autocorrelation and spatial association, discusses the criteria for the identification of spatial association by the use of global Moran Coefficient, Local Moran and Local Geary. Furthermore, a user-friendly statistical module, combining spatial statistical analysis methods with GIS visual techniques, is developed in Arcview using Avenue. An example is also given to show the usefulness of this module in identifying and quantifying the underlying spatial association patterns between economic units.展开更多
The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence t...The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence that is applied to medical study was built by the authors. An example was given to demonstrate it. The superiority of GRA was recounted briefly.展开更多
[Objective] To introduce a convenient and easy way for the statistical anal- ysis on field efficacy trials of pesticide by using Visual Basic. [Method] The calcula- tion procedure of using Visual Basic to conduct stat...[Objective] To introduce a convenient and easy way for the statistical anal- ysis on field efficacy trials of pesticide by using Visual Basic. [Method] The calcula- tion procedure of using Visual Basic to conduct statistical analysis on the field efficacy of pesticides was introduced, and an example was used to illustrate the usage and skill of the program. [Result] The procedure could quickly and accurately con- duct statistical analysis on the field efficacy of pesticide by only inputting initial data of the test, and it could compare the significance of differences between various fac- tors. Its calculated results were consistent with the results of the specialized statisti- cal software DPS. [Conclusion] It is a quick and simple method with high accuracy and reliability, which can greatly improve the efficiency of pesticide formulation opti- mization.展开更多
Abstract Data-driven tools, such as principal component analysis （PCA） and independent component analysis （ICA） have been applied to different benchmarks as process monitoring methods. The difference between the t...Abstract Data-driven tools, such as principal component analysis （PCA） and independent component analysis （ICA） have been applied to different benchmarks as process monitoring methods. The difference between the two methods is that the components of PCA are still dependent while ICA has no orthogonality constraint and its latentvariables are independent. Process monitoring with PCA often supposes that process data or principal components is Gaussian distribution. However, this kind of constraint cannot be satisfied by several practical processes. To ex-tend the use of PCA, a nonparametric method is added to PCA to overcome the difficulty, and kernel density estimation （KDE） is rather a good choice. Though ICA is based on non-Gaussian distribution intormation, .KDE can help in the close monitoring of the data. Methods, such as PCA, ICA, PCA.with .KDE（KPCA）, and ICA with KDE,（KICA）, are demonstrated and. compared by applying them to a practical industnal Spheripol craft polypropylene catalyzer reactor instead of a laboratory emulator.展开更多
基金funded by the China's National Natural Science Foundation(No.41440027)。
文摘Population growth and expanding urbanization have caused persistent shortages and contamination of groundwater resources in Mali,Africa.The increase in groundwater salinity makes it more difficult for residents to obtain drinking water,it is necessary to clarify the causes and control factors of groundwater mineralization in Gao region,northern Mali.Based on the analysis of the hydrochemical composition of groundwater in 24 boreholes,Piper and Sch?eller diagrams,principal component analysis(PCA)and hierarchical cluster analysis(HCA)are used to carry out multivariate statistical analysis on the main ions.The results show that the groundwater samples are weakly alkaline,with pH values ranging from 5.83 to 8.40,and the average values of boreholes are 7.50,respectively.The average electrical conductivity(EC)value is 354.4(μS/cm),and the extreme value is between 124.0 and 1247(μS/cm).Water is usually mineralized and presents nine types of water phase.The three principal components explain 84.42%of the total variance for 13 parameters.The factor F1(58.85%),the factor F2(16.88%)and the factor F3(8.69%)present for the majority of the total data set.In addition,multivariate statistical analysis confirmed the genetic relationship among aquifers and identified three main clusters.Clustering related to groundwater mineralization(F1),clustering related to oxide reduction and iron enrichment(F2),and clustering of groundwater pollution caused by nitrate and magnesium(F3).We found that agriculture,weathering activities and dissolution of geological materials promote the mineralization of groundwater.Groundwater quality in the Gao region is becoming less and less potable because of increasing salinity.
基金Guangdong Basic and Applied Basic Research Foundation(2022A1515010207)Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices(AFMD-KFJJ-22204)。
文摘Three-point bending fatigue experiments were conducted on a typical Zr-based bulk metallic glass(BMG)at ambient temperature to investigate the fatigue behavior under cyclic loading conditions.Results show that the stress amplitude-cycles to failure(S-N)curve of the Zr-based BMG is determined,and the fatigue endurance limit is 442 MPa(stress amplitude).To evaluate the probability-stress amplitude-cycles to failure(P-S-N)curve,an estimation method based on maximum likelihood was proposed,which relies on statistical principles to estimate the fatigue life of the material and allows for a reduction in the number of samples required,offering a cost-effective and efficient alternative to traditional testing methods.The experimental results align with the American Society for Testing and Materials(ASTM)standard,indicating the reliability and accuracy of this estimation method in evaluating the fatigue behavior of Zr-based BMG.
文摘This study focuses on designing a solution to the perennial issue of clothing fit in Fashion Industry using tools offered by digital technology and statistical analysis, in particular, the data gathered on Asian women (Bangladeshi and Chinese). The study reveals that managing information can significantly enhance the capability of the industry to cater to the needs of its consumers and increase diversity. It centers on the effectiveness of turning dressmaking patterns into digital ones, thus transecting from traditional cutting and stitching to remote techniques. This entails the requirement to have correct self-measures and probable errors, which can arise in the process. Thus, with the help of regression analysis, the study identifies, which measurements are incorrect and influence the fit of the clothes, and, therefore, digital pattern creation is more accurate. Altogether, it can be observed how digitalization and statistical methods are crucial to transforming the way clothes are created to approach an ideal standard of measurements that fulfill every customer’s needs to make operational and efficient the clothing sector.
文摘Statistical Energy Analysis(SEA) is one of the conventional tools for predicting vehicle high-frequency acoustic responses.This study proposes a new method that can provide customized optimization solutions to meet NVH targets based on the specific needs of different project teams during the initial project stages.This approach innovatively integrates dynamic optimization,Radial Basis Function(RBF),and Fuzzy Design Variables Genetic Algorithm(FDVGA) into the optimization process of Statistical Energy Analysis(SEA),and also takes vehicle sheet metal into account in the optimization of sound packages.In the implementation process,a correlation model is established through Python scripts to link material density with acoustic parameters,weight,and cost.By combining Optimus and VaOne software,an optimization design workflow is constructed and the optimization design process is successfully executed.Under various constraints related to acoustic performance,weight and cost,a globally optimal design is achieved.This technology has been effectively applied in the field of Battery Electric Vehicle(BEV).
文摘The Okiep Copper District is the oldest mining district in South Africa with a legacy of more than 150 years of mining.This legacy can be felt in the presence of large tailings dams scattered throughout the area.These tailings have a deleterious impact on the surrounding environment.To use geochemical methods in determining the scale of the impact, pre-mining background levels need to be determined. This is especially difficult in areas for which
基金Supported by the Guangdong Technological Program (2009B02001002)the Special Funds of National Agricultural Department for Commonweal Trade Research (nyhyzx07-019)the Earmarked Fund for Modern Agro-industry Technology Research System~~
文摘[Objective] The study aimed to compare several statistical analysis models for estimating the sugarcane （Saccharum spp.） genotypic stability. [Method] The data of sugarcane regional trials in Guangdong, in 2009 was analyzed by three models respectively： Finlay and Wilkinson model： the additive main effects and multiplicative interaction （AMMI） model and linear regression-principal components analysis （LR- PCA） model, so as to compare the models. [Result] The Finlay and Wilkinson model was easier, but the analysis of the other two models was more comprehensive, and there was a bit difference between the additive main effects and multiplicative inter- action （AMMI） model and linear regression-principal components analysis （LR-PCA） model. [Conclusion] In practice, while the proper statistical method was usually con- sidered according to the different data, it should be also considered that the same data should be analyzed with different statistical methods in order to get a more reasonable result by comparison.
文摘Based on tidal data statistical analysis for 20 years of Tanggu Marine Environmental Monitoring Station from 1991 to 2010, we concluded that an average of nearly 10 days of 100 cm above water increase took place at Tianjin coast every year. The maximum high tide and average tide of Tianjin coast occurred in summer and autumn, and the maximum water increase also occurred in summer and autumn. Days with water increase more than 100 cm mostly occurred in spring, autumn and winter. Then we summarized the causes of coastal storm surge disaster in Tianjin based on astronomical tide factors, meteorological factors, sea level rise, land subsidence, and geographic factors, et al. Finally, we proposed storm surge disaster prevention measures.
基金supported by the National Natural Science Foundation of China(Nos.12365018,U2032146,12465024)Natural Science Foundation of Inner Mongolia(Nos.2023MS01005,2024ZD23,2024FX30)the program of Innovative Research Team and Young Talents of Science and Technology in Universities of Inner Mongolia Autonomous Region(Nos.NMGIRT2217,NJYT23109)。
文摘The neutron capture resonance parameters for 159Tb are crucial for validating nuclear models,nucleosynthesis during the neutron capture process,and nuclear technology applications.In this study,resonance analyses were performed for the neutron capture cross sections of 159Tb measured at the China Spallation Neutron Source(CSNS)backscattering white neutron beamline(Back-n)facility.The resonance parameters were extracted from the R-Matrix code SAMMY and fitted to the experimental capture yield up to the 1.2 keV resolved resonance region(RRR).The average resonance parameters were determined by performing statistical analysis on the set of the resonance parameters in the RRR.These results were used to fit the measured average capture cross sections using the FITACS code in the unresolved resonance region from 2 keV to 1 MeV.The contributions of partial waves l=0,1,2 to the average capture cross sections are reported.
文摘[Objectives]To study the factors influencing the tourism economy in Henan Province.[Methods]Using tourism-related data from Henan Province covering the period from 2000 to 2020,this study constructs a regression model based on multivariate statistical methods to investigate the determinants of the tourism economy.The dependent variable in the model is the domestic tourism revenue of Henan Province,while the independent variables comprise the number of tourist arrivals,total operational railway mileage,the number of travel agencies,and the per capita disposable income of urban residents.[Results]Both the total railway mileage and the per capita disposable income of urban residents are the primary factors influencing the development of Henan's tourism economy.[Conclusions]It is recommended to reduce uncertainty and liquidity constraints to mitigate residents'precautionary savings behavior,actively expand domestic demand to leverage tourism as an economic driver,and improve infrastructure to support tourism development.
文摘BACKGROUND Meta-analysis is a critical tool in evidence-based medicine,particularly in cardiology,where it synthesizes data from multiple studies to inform clinical decisions.This study explored the potential of using ChatGPT to streamline and enhance the meta-analysis process.AIM To investigate the potential of ChatGPT to conduct meta-analyses in interventional cardiology by comparing the results of ChatGPT-generated analyses with those of randomly selected,human-conducted meta-analyses on the same topic.METHODS We systematically searched PubMed for meta-analyses on interventional cardiology published in 2024.Five metaanalyses were randomly chosen.ChatGPT 4.0 was used to perform meta-analyses on the extracted data.We compared the results from ChatGPT with the original meta-analyses,focusing on key effect sizes,such as risk ratios(RR),hazard ratios,and odds ratios,along with their confidence intervals(CI)and P values.RESULTS The ChatGPT results showed high concordance with those of the original meta-analyses.For most outcomes,the effect measures and P values generated by ChatGPT closely matched those of the original studies,except for the RR of stent thrombosis in the Sreenivasan et al study,where ChatGPT reported a non-significant effect size,while the original study found it to be statistically significant.While minor discrepancies were observed in specific CI and P values,these differences did not alter the overall conclusions drawn from the analyses.CONCLUSION Our findings suggest the potential of ChatGPT in conducting meta-analyses in interventional cardiology.However,further research is needed to address the limitations of transparency and potential data quality issues,ensuring that AI-generated analyses are robust and trustworthy for clinical decision-making.
基金the National Natural Science Foundation of China(42305011).
文摘Multi-angle statistical analysis of tropical cyclones(TCs)and their distant thermodynamic disturbances over Northwest Pacific from July to September during 2001-2020 was conducted.The results show that TCs could trigger distant thermodynamic disturbances,which mainly caused an increase in air pressure and a rise in temperature in northern China.The distant thermodynamic disturbances triggered by TCs differed in spatial distribution and intensity in different months.In the same month,the spatial distribution of such disturbances triggered by high-intensity TCs was consistent with the overall pattern,and there was a significant increase in intensity and area.From the probability of TC activities and the significance test of variance of analysis under different levels of P-J index,it is found that TC activities could stimulate the increase of P-J teleconnection index.There was a significant positive correlation between them,which was accompanied by a step effect.
基金supported in part by the National Science Fund for Distinguished Young Scholars of China(62225303)the National Natural Science Fundation of China(62303039,62433004)+2 种基金the China Postdoctoral Science Foundation(BX20230034,2023M730190)the Fundamental Research Funds for the Central Universities(buctrc202201,QNTD2023-01)the High Performance Computing Platform,College of Information Science and Technology,Beijing University of Chemical Technology
文摘Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.
文摘The use of statistics has received increasing attention in the studies of linguistics and applied linguistics. However,due to its complexity and preciseness,there are many problems of application of statistics. The present paper tries to discuss the application of statistics in a M.A. dissertation and aims to explain how to apply statistics to linguistics research normatively,scientifically,and precisely.
基金supported by the Major State Basic Research Development Program (No. 2010CB428800)the Geological Survey Projects Foundation of Institute of Hydrogeology and Environmental Geology (No. SK201308)
文摘Understanding the controlling factor of groundwater quality can enhance promoting sustainable development of groundwater resources. To this end, multivariate statistical analysis（MA） and hydrochemical analysis were introduced in this work. The results indicate that the canonical discriminant function with 7 parameters was established using the discriminant analysis（DA） method, which can afford 100% correct assignation according to the 3 different clusters（good water（GW）, poor water（PW）, and very poor water（VPW）） obtained from cluster analysis（CA）. According to factor analysis（FA）, 8 factors were extracted from 25 hydrochemical elements and account for 80.897% of the total data variance, suggesting that groundwater with higher concentrations of sodium, calcium, magnesium, chloride, and sulfate in southeastern study area are mainly affected by the natural process; the higher level of arsenic and chromium in groundwater extracted from northwestern part of study area are derived by industrial activities; domestic and agriculture sewage have important contribution to copper, iron, iodine, and phosphate in the northern study area. Therefore, this work can help identify the main controlling factor of groundwater quality in North China plain so as to make better and more informed decisions about how to achieve groundwater resources sustainable development.
基金supported by National Natural Science Foundation of China (Grant No. 51175214)Scientific and Technological Planning Project of China (Grant No. 2011BAG03B01-1)Based Research Operation Expenses Project of Jilin University, China (Grant No. 421032572415)
文摘How to simulate interior aerodynamic noise accurately is an important question of a car interior noise reduction. The unsteady aerodynamic pressure on body surfaces is proved to be the key effect factor of car interior aerodynamic noise control in high frequency on high speed. In this paper, a detail statistical energy analysis （SEA） model is built. And the vibra-acoustic power inputs are loaded on the model for the valid result of car interior noise analysis. The model is the solid foundation for further optimization on car interior noise control. After the most sensitive subsystems for the power contribution to car interior noise are pointed by SEA comprehensive analysis, the sound pressure level of car interior aerodynamic noise can be reduced by improving their sound and damping characteristics. The further vehicle testing results show that it is available to improve the interior acoustic performance by using detailed SEA model, which comprised by more than 80 subsystems, with the unsteady aerodynamic pressure calculation on body surfaces and the materials improvement of sound/damping properties. It is able to acquire more than 2 dB reduction on the central frequency in the spectrum over 800 Hz. The proposed optimization method can be looked as a reference of car interior aerodynamic noise control by the detail SEA model integrated unsteady computational fluid dynamics （CFD） and sensitivity analysis of acoustic contribution.
基金China National Science Foundation(40730948,41075037,41175063)Special Project of Chinese Academy of Meteorological Sciences(2007Y006)
文摘Based on the Tropical Cyclone(TC briefly thereafter)Yearbook 1980-2009,this paper first analyzes the number and intensity change of the TCs which passed directly over or by the side of Poyang Lake(the distance of TC center is less than 1°longitude or 1°latitude from the Lake)among all the landfalling TCs in China during the past 30 years.Two cases are examined in detail in this paper.One is severe typhoon Rananim with a speed of 3.26 m/s and a change of 1 hPa in intensity when it was passing the Lake.The other is super typhoon Saomai with a faster moving speed of 6.50 m/s and a larger change in intensity of 6 hPa.Through numerical simulation experiments,this paper analyzes how the change of underlying surface from water to land contributes to the differences in intensity,speed and mesoscale convection of the two TCs when they passed the Lake.Results show that the moisture and dynamic condition above the Lake were favorable for the maintenance of the intensity when Rananim was passing through Poyang Lake,despite the moisture supply from the ocean was cut off.As a result,there was strong convection around the lake which led to a rainfall spinning counter-clockwise as it was affected by the TC movement.However,little impact was seen in the Saomai case.These results indicate that for the TCs coming ashore on Poyang Lake with a slow speed,the large water body is conducive to the sustaining of the intensity and strengthening of the convection around the TC center and the subsequent heavy rainfall.On the contrary,a fast-moving TC is less likely to be influenced by the underlying surface in terms of intensity and speed.
文摘This paper summarizes a few spatial statistical analysis methods for to measuring spatial autocorrelation and spatial association, discusses the criteria for the identification of spatial association by the use of global Moran Coefficient, Local Moran and Local Geary. Furthermore, a user-friendly statistical module, combining spatial statistical analysis methods with GIS visual techniques, is developed in Arcview using Avenue. An example is also given to show the usefulness of this module in identifying and quantifying the underlying spatial association patterns between economic units.
文摘The concept, fundamental theory, analytical steps and formulae of grey relational analysis (GRA)-a new statistical method or multifactorial analysis in the field of medicine were introduced. GRA of grouping sequence that is applied to medical study was built by the authors. An example was given to demonstrate it. The superiority of GRA was recounted briefly.
基金Supported by the Scientific and Technological Foundation for Special Basic Research of Chinese Academy of Tropical Agricultural Science(2012hzs1J002)the National Natural Science Foundation of China(31101465)the Research Fund for Welfare Industry(Agriculture)(201103026)~~
文摘[Objective] To introduce a convenient and easy way for the statistical anal- ysis on field efficacy trials of pesticide by using Visual Basic. [Method] The calcula- tion procedure of using Visual Basic to conduct statistical analysis on the field efficacy of pesticides was introduced, and an example was used to illustrate the usage and skill of the program. [Result] The procedure could quickly and accurately con- duct statistical analysis on the field efficacy of pesticide by only inputting initial data of the test, and it could compare the significance of differences between various fac- tors. Its calculated results were consistent with the results of the specialized statisti- cal software DPS. [Conclusion] It is a quick and simple method with high accuracy and reliability, which can greatly improve the efficiency of pesticide formulation opti- mization.
基金Supported by the National Natural Science Foundation of China （No.60574047） and the Doctorate Foundation of the State Education Ministry of China （No.20050335018）.
文摘Abstract Data-driven tools, such as principal component analysis （PCA） and independent component analysis （ICA） have been applied to different benchmarks as process monitoring methods. The difference between the two methods is that the components of PCA are still dependent while ICA has no orthogonality constraint and its latentvariables are independent. Process monitoring with PCA often supposes that process data or principal components is Gaussian distribution. However, this kind of constraint cannot be satisfied by several practical processes. To ex-tend the use of PCA, a nonparametric method is added to PCA to overcome the difficulty, and kernel density estimation （KDE） is rather a good choice. Though ICA is based on non-Gaussian distribution intormation, .KDE can help in the close monitoring of the data. Methods, such as PCA, ICA, PCA.with .KDE（KPCA）, and ICA with KDE,（KICA）, are demonstrated and. compared by applying them to a practical industnal Spheripol craft polypropylene catalyzer reactor instead of a laboratory emulator.
