The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurode...The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.展开更多
With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance s...With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance strategies often struggle to accurately predict the degradation process of equipment,leading to excessive maintenance costs or potential failure risks.However,existing prediction methods based on statistical models are difficult to adapt to nonlinear degradation processes.To address these challenges,this study proposes a novel condition-based maintenance framework for planetary gearboxes.A comprehensive full-lifecycle degradation experiment was conducted to collect raw vibration signals,which were then processed using a temporal convolutional network autoencoder with multi-scale perception capability to extract deep temporal degradation features,enabling the collaborative extraction of longperiod meshing frequencies and short-term impact features from the vibration signals.Kernel principal component analysis was employed to fuse and normalize these features,enhancing the characterization of degradation progression.A nonlinear Wiener process was used to model the degradation trajectory,with a threshold decay function introduced to dynamically adjust maintenance strategies,and model parameters optimized through maximum likelihood estimation.Meanwhile,the maintenance strategy was optimized to minimize costs per unit time,determining the optimal maintenance timing and preventive maintenance threshold.The comprehensive indicator of degradation trends extracted by this method reaches 0.756,which is 41.2%higher than that of traditional time-domain features;the dynamic threshold strategy reduces the maintenance cost per unit time to 55.56,which is 8.9%better than that of the static threshold optimization.Experimental results demonstrate significant reductions in maintenance costs while enhancing system reliability and safety.This study realizes the organic integration of deep learning and reliability theory in the maintenance of planetary gearboxes,provides an interpretable solution for the predictive maintenance of complex mechanical systems,and promotes the development of condition-based maintenance strategies for planetary gearboxes.展开更多
Acrylamide(AA)is a neurotoxin and carcinogen that formed during the thermal food processing.Conventional quantification techniques are difficult to realize on-site detection of AA.Herein,a flower-like bimetallic FeCu ...Acrylamide(AA)is a neurotoxin and carcinogen that formed during the thermal food processing.Conventional quantification techniques are difficult to realize on-site detection of AA.Herein,a flower-like bimetallic FeCu nanozyme(FeCuzyme)sensor and portable platform were developed for naked-eye and on-site detection of AA.The FeCuzyme was successfully prepared and exhibited flower-like structure with 3D catalytic centers.Fe/Cu atoms were considered as active center and ligand frameworks were used as cofactor,resulting in collaborative substrate-binding features and remarkably peroxidase-like activity.During the catalytic process,the 3,3′,5,5′-tetrame-thylbenzidine(TMB)oxidation can be quenched by glutathione(GSH),and then restored after thiolene Michael addition reaction between GSH and AA.Given the“on–off–on”effect for TMB oxidation and high PODlike activity,FeCuzyme sensor exhibited a wide linear relationship from 0.50 to 18.00μM(R^(2)=0.9987)and high sensitivity(LOD=0.2360μM)with high stability.The practical application of FeCuzyme sensor was successfully validated by HPLC method.Furthermore,a FeCuzyme portable platform was designed with smartphone/laptop,and which can be used for naked-eye and on-site quantitative determination of AA in real food samples.This research provides a way for rational design of a novel nanozyme-based sensing platform for AA detection.展开更多
Background Pain sensitivity is critical for preventing non-suicidal self-injury(NSSI)behaviours;however,individuals engaging in such behaviours often exhibit decreased pain sensitivity,which may undermine this natural...Background Pain sensitivity is critical for preventing non-suicidal self-injury(NSSI)behaviours;however,individuals engaging in such behaviours often exhibit decreased pain sensitivity,which may undermine this natural safeguard.The dorsolateral prefrontal cortex(DLPFC)is a key region involved in pain regulation,and recent approaches using transcranial direct current stimulation(tDCS)to target the DLPFC have shown potential for modulating pain processing and restoring normal pain perception for individuals engaging in NSSI behaviours.Aims This study aimed to explore the immediate and short-term effects of a single session of tDCS on pain sensitivity in individuals with NSSI,as well as its secondary effects on mood and NSSI-related factors.Methods In this randomised,double-blind,parallel,sham-controlled clinical trial,participants with a history of NSSI were randomly assigned to receive either active or sham tDCS.The intervention consisted of a single 20 min tDCS session targeting the left DLPFC.The primary outcome was pain sensitivity,measured by the pressure pain threshold(PPT)and heat pain score(HPS).Secondary and additional outcomes included NSSI urges,NSSI resistance,self-efficacy in resisting NSSI,mood-related variables and exploratory cognitive-affective processes such as rumination,self-criticism and self-perceived pain sensitivity,assessed at baseline,immediately post-intervention,and at 24 hours,1 week and 2 weeks follow-ups.Results For the primary outcomes,no significant differences between groups were observed for pain sensitivity(PPT,padj=0.812;HPS,padj=0.608).However,an exploratory sensitivity analysis treating each trial as an individual observation revealed a significant effect on HPS(padj=0.036).For the secondary and additional outcomes,although there were initial improvements in joyful feelings and reductions in negative affect at 2 weeks post-intervention,these effects did not remain significant after multiple comparison corrections.Notably,reductions in rumination were statistically significant at both 1-week and 2-week follow-ups(1 week,p_(adj)=0.040;2 weeks,p_(adj)=0.042).There were no significant effects on NSSI urges,NSSI resistance,self-efficacy in resisting NSSI or self-criticism.Conclusions A single session of tDCS over the left DLPFC did not produce significant changes in pain sensitivity in individuals with NSSI.A sensitivity analysis indicated an effect on heat pain sensitivity,possibly reflecting changes in brain activity,warranting confirmation through neuroimaging.These findings suggest that tDCS warrants further investigation for its potential to influence pain-related cognitive-affective processes in individuals with NSSI.展开更多
A new severe plastic deformation （SPD） method that is extrusion-shearing （ES）, which includes initial forward extrusion and shearing process subsequently, was developed to fabricate the fine grained AZ31 Mg alloys...A new severe plastic deformation （SPD） method that is extrusion-shearing （ES）, which includes initial forward extrusion and shearing process subsequently, was developed to fabricate the fine grained AZ31 Mg alloys. The components of ES die were manufactured and installed to gleeble1500D thermo-mechanical simulator. Microstructure observations were carried out in different positions of ES formed rods. The results show that homogeneous microstructures with mean grain size of 2 μm are obtained at lower temperature as the accumulated true strain is 2.44. Occurring of continuous dynamic recrystallization （DRX） is the main reason for grain refinement during ES process. The experimental results show that the ES process effectively refines the grains of AZ31 magnesium. The production results of ES extrusion with industrial extruder under different extrusion conditions show that the ES extrusion can be applied in large-scale industry.展开更多
Embodied Language Comprehension Theory claims that language is grounded in bodily activity and meaning is grounded in sensory motor system in modality.This study aims to examine whether EFL(English as a Foreign Langua...Embodied Language Comprehension Theory claims that language is grounded in bodily activity and meaning is grounded in sensory motor system in modality.This study aims to examine whether EFL(English as a Foreign Language)learners triggered Action-Sentence Compatibility Effect(ACE)during sentence comprehension.The English sentences including concrete and abstract verbs are taken as stimuli.Reaction time and accuracy rate of the participants were collected as the experimental data.Two groups of students with different English proficiencies participated in the study.The results indicate that(1)While processing concrete-verb sentences,both groups triggered ACE.(2)There is no significant ACE in processing abstract-verb sentences.(3)High proficiency group responded faster with a higher accuracy.(4)It is difficult for EFL learners to process abstract actions.To conclude,the present study shows that mental simulation is activated while EFL learners with certain language proficiency are processing sentences.In foreign language comprehension,mental simulation would be facilitated with higher language proficiency.展开更多
一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家...一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。展开更多
Laser multiple processing, i.e. laser surface texturing and then Laser Shock Processing (LSP), is a new surface processing technology for the preparation of bionic non-smooth surfaces. Based on engineering bionics, sa...Laser multiple processing, i.e. laser surface texturing and then Laser Shock Processing (LSP), is a new surface processing technology for the preparation of bionic non-smooth surfaces. Based on engineering bionics, samples of bionic non-smooth surfaces of stainless steel 0Crl 8Ni9 were manufactured in the form of reseau structure by laser multiple processing. The mechanical properties (including microhardness, residual stress, surface roughness) and microstructure of the samples treated by laser multiple processing were compared with those of the samples without LSP The results show that the mechanical properties of these samples by laser multiple processing were clearly improved in comparison with those of the samples without LSP The mechanisms underlying the improved surface microhardness and surface residual stress were analyzed, and the relations between hardness, comnressive residual stress and roughness were also presented.展开更多
The optimum parameters were determined for synthesizing ZrN-Si3N4 composite powder from zircon by carbothermal reduction-nitridation （CTRN） process. The samples were prepared by mixing the carbon black of an average...The optimum parameters were determined for synthesizing ZrN-Si3N4 composite powder from zircon by carbothermal reduction-nitridation （CTRN） process. The samples were prepared by mixing the carbon black of an average particle size less than 30 μm and the zircon of 40 μm with C/ZrSiO4 mass ratios of 0.2, 0.3, 0.4, and 0.5. The prepared samples were subjected to the CTRN process at temperatures of 1673, 1723, 1753, and 1773 K for 6, 9, and 12 h. The CTRN process was conducted in an atmosphere-controlled tubular furnace in a nitrogen gas flow of 1.0 L/rain. All the products were examined by X-ray powder diffraction to determine the transformation. The results showed that the proper transformation of ZrN-Si3N4 occurred at 1773 K for 12 h with a C/ZrSiO4 mass ratio of 0.4.展开更多
Dye wastewater containing heavy metal ions is a common industrial effluent with complex physicochemical properties. The treatment of metal-dye binary wastewater is difficult. In this work, a novel in-situ ferrite proc...Dye wastewater containing heavy metal ions is a common industrial effluent with complex physicochemical properties. The treatment of metal-dye binary wastewater is difficult. In this work, a novel in-situ ferrite process （IFP） was applied to treat Methylene Blue （MB）-Cu（II） binary wastewater, and the operational parameters were optimized for MB removal. Results showed that the optimum operating conditions were OH/M of 1.72, Cu2＋/Fe2＋ ratio of 1/2.5, reaction time of 90 min, aeration intensity of 320 mL/min, and reaction temperature of 40℃. Moreover, the presence of Ca2＋ and Mg2＋ moderately influenced the MB removal. Physical characterization results indicated that the precipitates yielded in IFP presented high surface area {232.50 m2/g） and a multi-porous structure. Based on the Langmuir model, the maximum adsorption capacity toward MB was 347.82 mg/g for the precipitates produced in IFP, which outperformed most other adsorbents. Furthermore, IFP rapidly sequestered MB with removal efficiency 5 to 10 times greater than that by general ferrite adsorption, which suggested a strong enhancement of MB removal by IFP. The MB removal process by IFP showed two different high removal stages, each with a corresponding removal mechanism. In the first brief stage （〈5 min）, the initial high MB removal （～95%） was achieved by predominantly electrostatic interactions. Then the sweep effect and encapsulation were dominant in the second longer stage.展开更多
This study examined spatial variations in the concentration,grain size and heavy mineral assemblages on Cedar Beach（Lake Erie,Canada）.Magnetic studies of heavy mineral-enriched,dark-reddish sands present on the beac...This study examined spatial variations in the concentration,grain size and heavy mineral assemblages on Cedar Beach（Lake Erie,Canada）.Magnetic studies of heavy mineral-enriched,dark-reddish sands present on the beach showed that magnetite（～150μm） is the dominant magnetic mineral.Surficial magnetic susceptibility values defined three zones：a lakeward region close to the water line（Zone 1）,the upper swash zone（Zone 2） and the region landwards of the upper swash zone （Zone 3）.Zone 2 showed the highest bulk and mass susceptibility（κ,χ） and the highest mass percentage of smaller grain-size（250μm） fractions in the bulk sand sample.Susceptibility（i.e.κandχ） values decreased and grain size coarsened from Zone 2 lakewards（into Zone 1） and landwards （into Zone 3）,and correlated with the distribution of the heavy mineral assemblage,most probably reflecting preferential separation of large,less dense particles by waves and currents both along and across the beach.The eroded western section of Cedar Beach showed much higher concentrations of heavy minerals including magnetite,and finer sand grain sizes than the accreting eastern section, suggesting that magnetic techniques could be used as a rapid,cost-effective way of examining erosion along sensitive coastline areas.展开更多
The Zhaxikang Pb-Zn-Sb polymetallic deposit is one of the most important deposits in the newly recognized southern Tibet antimony-gold metallogenic belt.Compared to the porphyry deposits in the Gangdese belt,much less...The Zhaxikang Pb-Zn-Sb polymetallic deposit is one of the most important deposits in the newly recognized southern Tibet antimony-gold metallogenic belt.Compared to the porphyry deposits in the Gangdese belt,much less researches have addressed these deposits,and the genesis of the Zhaxikang deposit is still controversial.Based on field investigation,petrographic,microthermometric,Laser Raman Microprobe（LRM） and SEM/EDS analyses of fluid,melt-fluid,melt and solid inclusions in quartz and beryl from pegmatite,this paper documents the characteristics and the evolution of primary magmatic fluid which was genetically related to greisenization,pegmatitization,and silification in the area.The results show that the primary magmatic fluids were derived from unmixing between melt and fluid and underwent a phase separation process soon after the exsolution.The primary magmatic fluids are of low salinity,high temperature,and can be approximated by the H_2O-NaCl-CO_2 system.The presence of Mn-Fe carbonate in melt-fluid inclusions and a Zn-bearing mineral（gahnite） trapped in beryl and in inclusions from pegmatite indicates high Mn,Fe,and Zn concentrations in the parent magma and magmatic fluids,and implies a genetic link between pegmatite and Pb-Zn-Sb mineralization.High B and F concentrations in the parent magma largely lower the solidus of the magma and lead to late fluid exsolution,thus the primary magmatic fluids related to pegmatite have much lower temperature than those in most porphyry systems.Boiling of the primary magmatic fluids leads to high-salinity and high-temperature fluids which have high capacity to transport Pb,Zn and Sb.The decrease in temperature and mixing with fluids from other sources may have caused the precipitation of Pb-Zn-Sn（Au） minerals in the distal fault systems surrounding the causative intrusion.展开更多
In this article, the population-size-dependent bisexual Galton-Watson processes are considered. Under some suitable conditions on the mating functions and the offspring distribution, existence of the limit of mean gro...In this article, the population-size-dependent bisexual Galton-Watson processes are considered. Under some suitable conditions on the mating functions and the offspring distribution, existence of the limit of mean growth rate per mating unit is proved. And based on the limit, a criterion to identify whether the process admits ultimate extinct with probability one is obtained.展开更多
In order to study water transfer characteristics inside non-saturated media during methane hydrate formation and dissociation processes,water changes on the top,middle and bottom locations of experimental media during...In order to study water transfer characteristics inside non-saturated media during methane hydrate formation and dissociation processes,water changes on the top,middle and bottom locations of experimental media during the reaction processes were continuously followed with a novel apparatus with three pF-meter sensors.Coarse sand,fine sand and loess were chosen as experimental media.It was experimentally observed that methane hydrate was easier formed inside coarse sand and fine sand than inside loess.Methane hydrate formation configuration and water transfer characteristics during methane hydrate formation processes were very different among the different non-saturated media,which were important for understanding methane hydrate formation and dissociation mechanism inside sediments in nature.展开更多
In this work, the current understanding and development of fliction-stir welding and processing of Ti- 6Al-4V alloy are briefly reviewed. The critical issues of these processes are addressed, including welding tool ma...In this work, the current understanding and development of fliction-stir welding and processing of Ti- 6Al-4V alloy are briefly reviewed. The critical issues of these processes are addressed, including welding tool materials and design, tool wea,, processing temperature, material flow, processing window and residual stresses. A particular emphasis is given to microstructural aspects and microstructure-properties relationship. Potential engineering applications are highlighted.展开更多
The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detecte...The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.展开更多
针对近连续流过渡区多尺度绕流问题,学界发展了N-S(Navier-Stokes)/DSMC(direct simulation Monte Carlo)耦合方法,大多数此类求解器面临着耦合界面波动失稳的难题,因此对复杂外形和耦合界面的通用性值得重点研究。鉴于非结构网格面向...针对近连续流过渡区多尺度绕流问题,学界发展了N-S(Navier-Stokes)/DSMC(direct simulation Monte Carlo)耦合方法,大多数此类求解器面临着耦合界面波动失稳的难题,因此对复杂外形和耦合界面的通用性值得重点研究。鉴于非结构网格面向复杂外形高度的贴体性、优良适应性以及工程领域对过渡流区高效通用型计算方法的需求,提出并实现了一套三维复杂界面四面体非结构网格N-S/DSMC耦合方法用于模拟高超声速过渡流。该方法使用局部克努森数作为连续失效参数划分连续/稀薄区域,并生成三维复杂N-S/DSMC耦合界面,沿分界面两侧分别推进一层或多层界面信息传递单元,基于边界状态法进行信息耦合。该耦合方法无需对复杂不规则分界面作光滑和修型处理,具备对复杂过渡流区工程问题数值模拟的通用性。分别对三维高超声速圆球和钝锥绕流进行模拟,数值结果显示:与参考文献中的DSMC方法相比,激波处数值和壁面特征值基本一致,最大误差不超过8%,但计算效率分别提高了1.74倍和2.28倍,验证了该耦合方法的正确性和高效性。展开更多
A detailed microstructural characterisation of the emerging weld-line grain structure,for bead-upon-plate welds in Ti-6Al-4V(Ti64)of differing plate thickness,was performed.The microstructure studied was formed during...A detailed microstructural characterisation of the emerging weld-line grain structure,for bead-upon-plate welds in Ti-6Al-4V(Ti64)of differing plate thickness,was performed.The microstructure studied was formed during both steady state and non-steady state sections within the weld path,with the non-steady state portion being taken from the end of the plate as the weld bead and heat source overhang the edge of the plate.This allows for the effects of welding process conditions on the microstructural evolution to be determined.The weld pool geometry and 3D tomography of the weld-induced defects have been investigated.Detailed characterisation of microstructure and texture for different welding parameters and for steady and non-steady states have been used to identify physical parameters for the microstructure predictions that are difficult to obtain otherwise.The different states significantly affect the weld crown shape and formation,weld toe,weld bead depth and width.However,the heat affected zone(HAZ)re-mains unchanged.Regarding the microstructural evolution,both the steady and non-steady states have similar microstructure and texture.No defects were observed in the steady state section of welds,but sub-surface spherical pores have been observed in the non-steady state section of a weld.Finite element modelling to simulate the thermal-metallurgical-mechanical fields within the steady and non-steady state sections of the welds was considered,and the cooling rates predicted within steady state and non-steady sections were interrogated to improve the theoretical understanding of the microstructure and defect formation differences in these Ti64 EB weld regions.展开更多
文摘The aging process is an inexorable fact throughout our lives and is considered a major factor in develo ping neurological dysfunctions associated with cognitive,emotional,and motor impairments.Aging-associated neurodegenerative diseases are characterized by the progressive loss of neuronal structure and function.
基金funded by scientific research projects under Grant JY2024B011.
文摘With the increasing complexity of industrial automation,planetary gearboxes play a vital role in largescale equipment transmission systems,directly impacting operational efficiency and safety.Traditional maintenance strategies often struggle to accurately predict the degradation process of equipment,leading to excessive maintenance costs or potential failure risks.However,existing prediction methods based on statistical models are difficult to adapt to nonlinear degradation processes.To address these challenges,this study proposes a novel condition-based maintenance framework for planetary gearboxes.A comprehensive full-lifecycle degradation experiment was conducted to collect raw vibration signals,which were then processed using a temporal convolutional network autoencoder with multi-scale perception capability to extract deep temporal degradation features,enabling the collaborative extraction of longperiod meshing frequencies and short-term impact features from the vibration signals.Kernel principal component analysis was employed to fuse and normalize these features,enhancing the characterization of degradation progression.A nonlinear Wiener process was used to model the degradation trajectory,with a threshold decay function introduced to dynamically adjust maintenance strategies,and model parameters optimized through maximum likelihood estimation.Meanwhile,the maintenance strategy was optimized to minimize costs per unit time,determining the optimal maintenance timing and preventive maintenance threshold.The comprehensive indicator of degradation trends extracted by this method reaches 0.756,which is 41.2%higher than that of traditional time-domain features;the dynamic threshold strategy reduces the maintenance cost per unit time to 55.56,which is 8.9%better than that of the static threshold optimization.Experimental results demonstrate significant reductions in maintenance costs while enhancing system reliability and safety.This study realizes the organic integration of deep learning and reliability theory in the maintenance of planetary gearboxes,provides an interpretable solution for the predictive maintenance of complex mechanical systems,and promotes the development of condition-based maintenance strategies for planetary gearboxes.
基金supported by the National Natural Science Foundation of China(32060577 and 32360619)Natural Science Foundation of Jiangxi Province(20224ACB203016 and 20212BAB203034)the Open Project of China Food Flavor and Nutrition Health Innovation Center(CFC2023B-013).
文摘Acrylamide(AA)is a neurotoxin and carcinogen that formed during the thermal food processing.Conventional quantification techniques are difficult to realize on-site detection of AA.Herein,a flower-like bimetallic FeCu nanozyme(FeCuzyme)sensor and portable platform were developed for naked-eye and on-site detection of AA.The FeCuzyme was successfully prepared and exhibited flower-like structure with 3D catalytic centers.Fe/Cu atoms were considered as active center and ligand frameworks were used as cofactor,resulting in collaborative substrate-binding features and remarkably peroxidase-like activity.During the catalytic process,the 3,3′,5,5′-tetrame-thylbenzidine(TMB)oxidation can be quenched by glutathione(GSH),and then restored after thiolene Michael addition reaction between GSH and AA.Given the“on–off–on”effect for TMB oxidation and high PODlike activity,FeCuzyme sensor exhibited a wide linear relationship from 0.50 to 18.00μM(R^(2)=0.9987)and high sensitivity(LOD=0.2360μM)with high stability.The practical application of FeCuzyme sensor was successfully validated by HPLC method.Furthermore,a FeCuzyme portable platform was designed with smartphone/laptop,and which can be used for naked-eye and on-site quantitative determination of AA in real food samples.This research provides a way for rational design of a novel nanozyme-based sensing platform for AA detection.
基金supported by National Natural Science Foundation of China(82471564)YT is supported by National Natural Science Foundation of China(32322035,32171078).
文摘Background Pain sensitivity is critical for preventing non-suicidal self-injury(NSSI)behaviours;however,individuals engaging in such behaviours often exhibit decreased pain sensitivity,which may undermine this natural safeguard.The dorsolateral prefrontal cortex(DLPFC)is a key region involved in pain regulation,and recent approaches using transcranial direct current stimulation(tDCS)to target the DLPFC have shown potential for modulating pain processing and restoring normal pain perception for individuals engaging in NSSI behaviours.Aims This study aimed to explore the immediate and short-term effects of a single session of tDCS on pain sensitivity in individuals with NSSI,as well as its secondary effects on mood and NSSI-related factors.Methods In this randomised,double-blind,parallel,sham-controlled clinical trial,participants with a history of NSSI were randomly assigned to receive either active or sham tDCS.The intervention consisted of a single 20 min tDCS session targeting the left DLPFC.The primary outcome was pain sensitivity,measured by the pressure pain threshold(PPT)and heat pain score(HPS).Secondary and additional outcomes included NSSI urges,NSSI resistance,self-efficacy in resisting NSSI,mood-related variables and exploratory cognitive-affective processes such as rumination,self-criticism and self-perceived pain sensitivity,assessed at baseline,immediately post-intervention,and at 24 hours,1 week and 2 weeks follow-ups.Results For the primary outcomes,no significant differences between groups were observed for pain sensitivity(PPT,padj=0.812;HPS,padj=0.608).However,an exploratory sensitivity analysis treating each trial as an individual observation revealed a significant effect on HPS(padj=0.036).For the secondary and additional outcomes,although there were initial improvements in joyful feelings and reductions in negative affect at 2 weeks post-intervention,these effects did not remain significant after multiple comparison corrections.Notably,reductions in rumination were statistically significant at both 1-week and 2-week follow-ups(1 week,p_(adj)=0.040;2 weeks,p_(adj)=0.042).There were no significant effects on NSSI urges,NSSI resistance,self-efficacy in resisting NSSI or self-criticism.Conclusions A single session of tDCS over the left DLPFC did not produce significant changes in pain sensitivity in individuals with NSSI.A sensitivity analysis indicated an effect on heat pain sensitivity,possibly reflecting changes in brain activity,warranting confirmation through neuroimaging.These findings suggest that tDCS warrants further investigation for its potential to influence pain-related cognitive-affective processes in individuals with NSSI.
基金Project (2007CB613700) supported by the National Basic Research Program of ChinaProject (50725413)supported by the National Natural Science Foundation of China+2 种基金Project (CQ CSTC,2010BB4301)supported by National Science Foundation of Chongqing, ChinaProject (CSTC2009AB4008) supported by Chongqing Sci & Tech Development Program, ChinaProject (2010CSTC-HDLS)supported by Chongqing Sci & Tech Commission, China
文摘A new severe plastic deformation （SPD） method that is extrusion-shearing （ES）, which includes initial forward extrusion and shearing process subsequently, was developed to fabricate the fine grained AZ31 Mg alloys. The components of ES die were manufactured and installed to gleeble1500D thermo-mechanical simulator. Microstructure observations were carried out in different positions of ES formed rods. The results show that homogeneous microstructures with mean grain size of 2 μm are obtained at lower temperature as the accumulated true strain is 2.44. Occurring of continuous dynamic recrystallization （DRX） is the main reason for grain refinement during ES process. The experimental results show that the ES process effectively refines the grains of AZ31 magnesium. The production results of ES extrusion with industrial extruder under different extrusion conditions show that the ES extrusion can be applied in large-scale industry.
文摘Embodied Language Comprehension Theory claims that language is grounded in bodily activity and meaning is grounded in sensory motor system in modality.This study aims to examine whether EFL(English as a Foreign Language)learners triggered Action-Sentence Compatibility Effect(ACE)during sentence comprehension.The English sentences including concrete and abstract verbs are taken as stimuli.Reaction time and accuracy rate of the participants were collected as the experimental data.Two groups of students with different English proficiencies participated in the study.The results indicate that(1)While processing concrete-verb sentences,both groups triggered ACE.(2)There is no significant ACE in processing abstract-verb sentences.(3)High proficiency group responded faster with a higher accuracy.(4)It is difficult for EFL learners to process abstract actions.To conclude,the present study shows that mental simulation is activated while EFL learners with certain language proficiency are processing sentences.In foreign language comprehension,mental simulation would be facilitated with higher language proficiency.
文摘一、作为哲学的AI for Process(一)郭为的哲学思想1.郭为是谁郭为是谁?他是一位哲学家。顺便说,他同时还领导着神州数码。为什么说郭为是哲学家呢?因为他在著作中谈到高深的哲学,如“数据如水,奔流不息,无界融合”。他引述古希腊哲学家赫拉克利特所说的“万物流转”,又说“你不能两次踏进同一条河流,因为新的水不断地流过你的身旁”,他所表达的意思是“世界上唯一不变的就是变化”。
基金supported by the National Natural Science Foundation of China (Grant No.50705038,50735001 and 10804037)the Foundation of Jiangsu Province (Grant No.06-D-023,BK2007512 and BG2007033)+2 种基金The 8th Student Research Train Program of Jiangsu University (Grant No.08A172)the Innovation Program of Graduated Student of Jiangsu Province (Grant No.XM2006-45)the Open Foundation of Jiangsu Key Laboratory of Advanced Numerical Control Technology (Grant No.KXJ07126)
文摘Laser multiple processing, i.e. laser surface texturing and then Laser Shock Processing (LSP), is a new surface processing technology for the preparation of bionic non-smooth surfaces. Based on engineering bionics, samples of bionic non-smooth surfaces of stainless steel 0Crl 8Ni9 were manufactured in the form of reseau structure by laser multiple processing. The mechanical properties (including microhardness, residual stress, surface roughness) and microstructure of the samples treated by laser multiple processing were compared with those of the samples without LSP The results show that the mechanical properties of these samples by laser multiple processing were clearly improved in comparison with those of the samples without LSP The mechanisms underlying the improved surface microhardness and surface residual stress were analyzed, and the relations between hardness, comnressive residual stress and roughness were also presented.
基金supported by the National Natural Science Foundation of China (No. 50274021)
文摘The optimum parameters were determined for synthesizing ZrN-Si3N4 composite powder from zircon by carbothermal reduction-nitridation （CTRN） process. The samples were prepared by mixing the carbon black of an average particle size less than 30 μm and the zircon of 40 μm with C/ZrSiO4 mass ratios of 0.2, 0.3, 0.4, and 0.5. The prepared samples were subjected to the CTRN process at temperatures of 1673, 1723, 1753, and 1773 K for 6, 9, and 12 h. The CTRN process was conducted in an atmosphere-controlled tubular furnace in a nitrogen gas flow of 1.0 L/rain. All the products were examined by X-ray powder diffraction to determine the transformation. The results showed that the proper transformation of ZrN-Si3N4 occurred at 1773 K for 12 h with a C/ZrSiO4 mass ratio of 0.4.
基金supported by National Key Research and Development Program of China(No.2016YFA0203204)the National Natural Science Foundation of China(Nos.51478041 and 51678053)
文摘Dye wastewater containing heavy metal ions is a common industrial effluent with complex physicochemical properties. The treatment of metal-dye binary wastewater is difficult. In this work, a novel in-situ ferrite process （IFP） was applied to treat Methylene Blue （MB）-Cu（II） binary wastewater, and the operational parameters were optimized for MB removal. Results showed that the optimum operating conditions were OH/M of 1.72, Cu2＋/Fe2＋ ratio of 1/2.5, reaction time of 90 min, aeration intensity of 320 mL/min, and reaction temperature of 40℃. Moreover, the presence of Ca2＋ and Mg2＋ moderately influenced the MB removal. Physical characterization results indicated that the precipitates yielded in IFP presented high surface area {232.50 m2/g） and a multi-porous structure. Based on the Langmuir model, the maximum adsorption capacity toward MB was 347.82 mg/g for the precipitates produced in IFP, which outperformed most other adsorbents. Furthermore, IFP rapidly sequestered MB with removal efficiency 5 to 10 times greater than that by general ferrite adsorption, which suggested a strong enhancement of MB removal by IFP. The MB removal process by IFP showed two different high removal stages, each with a corresponding removal mechanism. In the first brief stage （〈5 min）, the initial high MB removal （～95%） was achieved by predominantly electrostatic interactions. Then the sweep effect and encapsulation were dominant in the second longer stage.
基金supported by funding from the 111 Project B07011 of Ministry of Education of China,the China Scholarship Council(CSC) to SWZ (NCIS No.2007103928)an NSERC grant to MTC. D.Chevalier is thanked for her help in sampling. Laboratory assistance was provided bv K.Kawasaki and S.Joshi
文摘This study examined spatial variations in the concentration,grain size and heavy mineral assemblages on Cedar Beach（Lake Erie,Canada）.Magnetic studies of heavy mineral-enriched,dark-reddish sands present on the beach showed that magnetite（～150μm） is the dominant magnetic mineral.Surficial magnetic susceptibility values defined three zones：a lakeward region close to the water line（Zone 1）,the upper swash zone（Zone 2） and the region landwards of the upper swash zone （Zone 3）.Zone 2 showed the highest bulk and mass susceptibility（κ,χ） and the highest mass percentage of smaller grain-size（250μm） fractions in the bulk sand sample.Susceptibility（i.e.κandχ） values decreased and grain size coarsened from Zone 2 lakewards（into Zone 1） and landwards （into Zone 3）,and correlated with the distribution of the heavy mineral assemblage,most probably reflecting preferential separation of large,less dense particles by waves and currents both along and across the beach.The eroded western section of Cedar Beach showed much higher concentrations of heavy minerals including magnetite,and finer sand grain sizes than the accreting eastern section, suggesting that magnetic techniques could be used as a rapid,cost-effective way of examining erosion along sensitive coastline areas.
基金financially supported by the State Basic Research Plan(973 project)(No.2011CB403100)IGCP/SIDA-600 project
文摘The Zhaxikang Pb-Zn-Sb polymetallic deposit is one of the most important deposits in the newly recognized southern Tibet antimony-gold metallogenic belt.Compared to the porphyry deposits in the Gangdese belt,much less researches have addressed these deposits,and the genesis of the Zhaxikang deposit is still controversial.Based on field investigation,petrographic,microthermometric,Laser Raman Microprobe（LRM） and SEM/EDS analyses of fluid,melt-fluid,melt and solid inclusions in quartz and beryl from pegmatite,this paper documents the characteristics and the evolution of primary magmatic fluid which was genetically related to greisenization,pegmatitization,and silification in the area.The results show that the primary magmatic fluids were derived from unmixing between melt and fluid and underwent a phase separation process soon after the exsolution.The primary magmatic fluids are of low salinity,high temperature,and can be approximated by the H_2O-NaCl-CO_2 system.The presence of Mn-Fe carbonate in melt-fluid inclusions and a Zn-bearing mineral（gahnite） trapped in beryl and in inclusions from pegmatite indicates high Mn,Fe,and Zn concentrations in the parent magma and magmatic fluids,and implies a genetic link between pegmatite and Pb-Zn-Sb mineralization.High B and F concentrations in the parent magma largely lower the solidus of the magma and lead to late fluid exsolution,thus the primary magmatic fluids related to pegmatite have much lower temperature than those in most porphyry systems.Boiling of the primary magmatic fluids leads to high-salinity and high-temperature fluids which have high capacity to transport Pb,Zn and Sb.The decrease in temperature and mixing with fluids from other sources may have caused the precipitation of Pb-Zn-Sn（Au） minerals in the distal fault systems surrounding the causative intrusion.
文摘In this article, the population-size-dependent bisexual Galton-Watson processes are considered. Under some suitable conditions on the mating functions and the offspring distribution, existence of the limit of mean growth rate per mating unit is proved. And based on the limit, a criterion to identify whether the process admits ultimate extinct with probability one is obtained.
基金supported by the CAS Knowledge Innovation Key Project (Grant No.KZCX2-YW-330)the National Science Fund Fostering Talents in Basic Research to Glaciology and Geocryology (Grant No.J0630966)
文摘In order to study water transfer characteristics inside non-saturated media during methane hydrate formation and dissociation processes,water changes on the top,middle and bottom locations of experimental media during the reaction processes were continuously followed with a novel apparatus with three pF-meter sensors.Coarse sand,fine sand and loess were chosen as experimental media.It was experimentally observed that methane hydrate was easier formed inside coarse sand and fine sand than inside loess.Methane hydrate formation configuration and water transfer characteristics during methane hydrate formation processes were very different among the different non-saturated media,which were important for understanding methane hydrate formation and dissociation mechanism inside sediments in nature.
文摘In this work, the current understanding and development of fliction-stir welding and processing of Ti- 6Al-4V alloy are briefly reviewed. The critical issues of these processes are addressed, including welding tool materials and design, tool wea,, processing temperature, material flow, processing window and residual stresses. A particular emphasis is given to microstructural aspects and microstructure-properties relationship. Potential engineering applications are highlighted.
基金Supported by the National Natural Science Foundation of China
文摘The Chang＇e-3 Visible and Near-infrared Imaging Spectrometer （VNIS） is one of the four payloads on the Yutu rover. After traversing the landing site during the first two lunar days, four different areas are detected, and Level 2A and 2B ra- diance data have been released to the scientific community. The released data have been processed by dark current subtraction, correction for the effect of temperature, radiometric calibration and geometric calibration. We emphasize approaches for re- flectance analysis and mineral identification for in-situ analysis with VNIS. Then the preliminary spectral and mineralogical results from the landing site are derived. After comparing spectral data from VNIS with data collected by the Ma instrument and samples of mare that were returned from the Apollo program, all the reflectance data have been found to have similar absorption features near 1000 nm except lunar sample 71061. In addition, there is also a weak absorption feature between 1750-2400nm on VNIS, but the slopes of VNIS and Ma reflectance at longer wavelengths are lower than data taken from samples of lunar mare. Spectral parameters such as Band Centers and Integrated Band Depth Ratios are used to analyze mineralogical features. The results show that detection points E and N205 are mixtures of high-Ca pyroxene and olivine, and the composition of olivineat point N205 is higher than that at point E, but the compositions of detection points S3 and N203 are mainly olivine-rich. Since there are no obvious absorption features near 1250 nm, plagioclase is not directly identified at the landing site.
文摘针对近连续流过渡区多尺度绕流问题,学界发展了N-S(Navier-Stokes)/DSMC(direct simulation Monte Carlo)耦合方法,大多数此类求解器面临着耦合界面波动失稳的难题,因此对复杂外形和耦合界面的通用性值得重点研究。鉴于非结构网格面向复杂外形高度的贴体性、优良适应性以及工程领域对过渡流区高效通用型计算方法的需求,提出并实现了一套三维复杂界面四面体非结构网格N-S/DSMC耦合方法用于模拟高超声速过渡流。该方法使用局部克努森数作为连续失效参数划分连续/稀薄区域,并生成三维复杂N-S/DSMC耦合界面,沿分界面两侧分别推进一层或多层界面信息传递单元,基于边界状态法进行信息耦合。该耦合方法无需对复杂不规则分界面作光滑和修型处理,具备对复杂过渡流区工程问题数值模拟的通用性。分别对三维高超声速圆球和钝锥绕流进行模拟,数值结果显示:与参考文献中的DSMC方法相比,激波处数值和壁面特征值基本一致,最大误差不超过8%,但计算效率分别提高了1.74倍和2.28倍,验证了该耦合方法的正确性和高效性。
基金support under the Manufacturing Portfolio collaborative project between Rolls-Royce plc,Partnership for Research in Simulation of Manufacturing and Materials (PRISM2),the University of Birmingham
文摘A detailed microstructural characterisation of the emerging weld-line grain structure,for bead-upon-plate welds in Ti-6Al-4V(Ti64)of differing plate thickness,was performed.The microstructure studied was formed during both steady state and non-steady state sections within the weld path,with the non-steady state portion being taken from the end of the plate as the weld bead and heat source overhang the edge of the plate.This allows for the effects of welding process conditions on the microstructural evolution to be determined.The weld pool geometry and 3D tomography of the weld-induced defects have been investigated.Detailed characterisation of microstructure and texture for different welding parameters and for steady and non-steady states have been used to identify physical parameters for the microstructure predictions that are difficult to obtain otherwise.The different states significantly affect the weld crown shape and formation,weld toe,weld bead depth and width.However,the heat affected zone(HAZ)re-mains unchanged.Regarding the microstructural evolution,both the steady and non-steady states have similar microstructure and texture.No defects were observed in the steady state section of welds,but sub-surface spherical pores have been observed in the non-steady state section of a weld.Finite element modelling to simulate the thermal-metallurgical-mechanical fields within the steady and non-steady state sections of the welds was considered,and the cooling rates predicted within steady state and non-steady sections were interrogated to improve the theoretical understanding of the microstructure and defect formation differences in these Ti64 EB weld regions.
