In wave-equation migration and demigration,the cross-correlation imaging/forwarding step implicitly injects an additional copy of the source wavelet,so that the amplitude spectrum of the wavelet is applied redundantly...In wave-equation migration and demigration,the cross-correlation imaging/forwarding step implicitly injects an additional copy of the source wavelet,so that the amplitude spectrum of the wavelet is applied redundantly(effectively imposing a wavelet-spectrum weighting,often akin to an amplitude-squared bias).This redundancy degrades structural fidelity and amplitude balance yet is frequently overlooked.We(i)formalize the mechanism by which cross-correlation duplicates the source-wavelet amplitude effect in both migration and demigration,and(ii)introduce a source-equalized operator that removes the redundancy by deconvolving(or dividing by)the wavelet amplitude spectrum in the imaging condition and its demigration counterpart,while leaving phase/kinematics intact.Using a band-limited Ricker wavelet on a two-layer model and on Marmousi,we show that,if unmanaged,the redundant wavelet spectrum broadens main lobes,introduces ringing,and suppresses vertical resolution in migrated images,and inflates spectrum mismatches between demigrated and observed data even when peak times agree.With our correction,images recover observed-data-consistent bandwidth and sharpened interfaces,and demigrated data also exhibit improved spectrum conformity and reduced amplitude misfit.The results clarify when source amplitudes matter,why cross-correlation makes them redundantly matter,and how a lightweight spectral correction restores physically meaningful amplitude behavior in wave-equation migration/demigration.展开更多
The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurren...The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurrent flow in annulus is carried out under different working conditions to reveal how the wellbore inclination angle,liquid phase property and countercurrent liquid velocity affect the bubble deformation and bubble migration trajectory/velocity,and to establish a bubble migration velocity prediction model.The bubbles in the countercurrent flow mainly migrate in two modes:free rising of isolated bubbles,and interactive rising of multiple bubbles.The bubbles migrate by an S-shaped trajectory in the countercurrent flow.With the increase of countercurrent liquid velocity,the lateral oscillation of bubbles is intensified.The increases of wellbore inclination angle,liquid density and liquid viscosity make the bubble migration trajectory gradually to be linear.The bubble is generally ellipsoidal during its rising.The wellbore inclination angle has little effect on the degree of bubble deformation.The bubbles are ellipsoidal during rising,with little influence of wellbore inclination angle on bubble deformation.With the increase of liquid viscosity and density,the aspect ratio of the bubble decreases.As the wellbore inclination angle increases,the bubble migration velocity gradually decreases.As the liquid viscosity increases,the bubble migration velocity decreases.As the liquid density increases,the bubble migration velocity increases slightly.The established bubble migration velocity prediction model yields errors within±15%,and demonstrates broad applicability across a wide range of operating conditions.展开更多
Population migration data derived from location-based services has often been used to delineate population flows between cities or construct intercity relationship networks to reveal and explore the complex interactio...Population migration data derived from location-based services has often been used to delineate population flows between cities or construct intercity relationship networks to reveal and explore the complex interaction patterns underlying human activities.Nevertheless,the inherent heterogeneity in multimodal migration big data has been ignored.This study conducts an in-depth comparison and quantitative analysis through a comprehensive lens of spatial association.Initially,the intercity interactive networks in China were constructed,utilizing migration data from Baidu and AutoNavi collected during the same time period.Subsequently,the characteristics and spatial structure similarities of the two types of intercity interactive networks were quantitatively assessed and analyzed from overall(network)and local(node)perspectives.Furthermore,the precision of these networks at the local scale is corroborated by constructing an intercity network from mobile phone(MP)data.Results indicate that the intercity interactive networks in China,as delineated by Baidu and AutoNavi migration flows,exhibit a high degree of structure equivalence.The correlation coefficient between these two networks is 0.874.Both networks exhibit a pronounced spatial polarization trend and hierarchical structure.This is evident in their distinct core and peripheral structures,as well as in the varying importance and influence of different nodes within the networks.Nevertheless,there are notable differences worthy of attention.Baidu intercity interactive network exhibits pronounced cross-regional effects,and its high-level interactions are characterized by a“rich-club”phenomenon.The AutoNavi intercity interactive network presents a more significant distance attenuation effect,and the high-level interactions display a gradient distribution pattern.Notably,there exists a substantial correlation between the AutoNavi and MP networks at the local scale,evidenced by a high correlation coefficient of 0.954.Furthermore,the“spatial dislocations”phenomenon was observed within the spatial structures at different levels,extracted from the Baidu and AutoNavi intercity networks.However,the measured results of network spatial structure similarity from three dimensions,namely,node location,node size,and local structure,indicate a relatively high similarity and consistency between the two networks.展开更多
As the primary functional component of a fusion reactor,the fusion blanket pebble bed,composed of numerous particles,is crucial for tritium breeding,neutron multiplication,and radiation shielding.Particles within trit...As the primary functional component of a fusion reactor,the fusion blanket pebble bed,composed of numerous particles,is crucial for tritium breeding,neutron multiplication,and radiation shielding.Particles within tritium-breeding pebble beds are subjected to prolonged neutron irradiation,high thermal loads,and strong magnetic fields in fusion environments.Such conditions render them susceptible to pulverization and fragmentation.The resulting fragments and powders migrate and are deposited into the gas channel,driven by the purge gas.The reduction in the effective flow area of the gas increases the flow resistance,resulting in tritium retention,degraded heat transfer,and other adverse effects.These conditions impair the thermodynamic properties of the pebble beds and hinder the self-maintenance of tritium.Limited information exists on powder migration and clogging mechanisms in fusion blanket pebble beds,particularly under diverse physical conditions.The aim of this study was to use a computational fluid dynamics model coupled with the discrete element method(CFD-DEM)to numerically explore powder migration and clogging in pebble beds.The model considers factors such as breeder orientation,purge velocity,powder size distribution,and friction coefficient.We propose two migration and clogging mechanisms.One involves powder with a large particle size,and the other does not.The results indicate that the powder migration velocity progresses through three stages:rapid decay,linear decay,and stability.Pebble-bed clogging manifests in two forms:extensive superficial clogging and uniform internal clogging.Two fitted curves were used to depict the migration and clogging tendencies.The powder size distribution significantly influenced the powder migration.The breeder orientation,powder size,and friction coefficient affected the distribution of the clogging powders.However,the impact of the purge velocity on powder migration and clogging in pebble beds was limited,and this effect varied significantly with different particle size ratios.Based on the analysis,a formula is proposed to characterize the behavior of the powder in the pebble beds.The results of this study can aid in analyzing and predicting powder dynamics in pebble beds.展开更多
To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator a...To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.展开更多
A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard...A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard k-εmodel and volume of fluid model.The bubble distribution was tracked by discrete phase model.Electromagnetic field was applied in the up-leg snorkel to enhance the effect of vacuum refining.The effect of swirling flow nozzles combined with electromagnetic stirring(EMS)on the flow characteristics of molten steel and bubble distribution was analyzed.The erosion of the up-leg snorkel was compared.The results show that when the swirling flow nozzles are used,the bubbles exhibit a distinct adherent rising behavior,and the refining efficiency decreases.In addition,the electromagnetic field can significantly improve the refining efficiency,but it brings stronger erosion to the up-leg snorkel.Nevertheless,when using the swirling flow nozzles combined with EMS,the refining performance is further optimized,and the erosion of the up-leg snorkel is also reduced due to its characteristic of bubble distribution.Compared to conventional nozzles,the mixing time was shortened by 16.2%,the recirculation rate increased by 12.5%.and the swirling intensity was strengthened by 8.9%.展开更多
Breast cancer(BRCA)is characterized by high heterogeneity,with aggressive subtypes frequently showing poor prognosis and resistance to conventional therapies,making the discovery of new therapeutic targets and strateg...Breast cancer(BRCA)is characterized by high heterogeneity,with aggressive subtypes frequently showing poor prognosis and resistance to conventional therapies,making the discovery of new therapeutic targets and strategies imperative.Although elevated expression of discs large homolog 3(DLG3)has been reported in BRCA,its functional role in disease progression remains unclear.We performed bioinformatic analyses of clinical datasets to evaluate the prognostic significance of DLG3 expression in BRCA patients.In vitro gain-and loss-of-function experiments were conducted to assess the impact of DLG3 on BRCA cell proliferation,migration,and colony formation.Transcriptomic profiling,coupled with pharmacological inhibition,was employed to identify and validate downstream signaling pathways.Additionally,we extended our validation to an in vivo model to assess the role of DLG3 in tumor progression.We found that elevated DLG3 levels correlated with poor prognosis in breast cancer patients.Functionally,DLG3 overexpression significantly promoted cell proliferation and migration in estrogen receptor-positive MCF7 and triple-negative MDA-MB-231 breast cancer cells,whereas its knockdown suppressed these effects.Transcriptomic analyses revealed that DLG3 activates signal transducer and activator of transcription 3(STAT3)signaling,a finding further corroborated by Western blot.Critically,treatment with the STAT3 inhibitor Stattic attenuated DLG3-driven proliferation and migration,supporting a DLG3-STAT3 oncogenic axis.Furthermore,in vivo studies validated the role of DLG3 in promoting tumor growth and its correlation with elevated STAT3 signaling,consistent with our in vitro findings.Our findings establish DLG3 as a novel driver of breast cancer progression that directly activates STAT3 signaling.DLG3 thus represents both a potential prognostic biomarker and a promising therapeutic target for aggressive breast cancer subtypes,including triple-negative breast cancer.展开更多
The global clustering of inventive talent shapes innovation capacity and drives economic growth.For China,this process is especially crucial in sustaining its development momentum.This paper draws on data from the EPO...The global clustering of inventive talent shapes innovation capacity and drives economic growth.For China,this process is especially crucial in sustaining its development momentum.This paper draws on data from the EPO Worldwide Patent Statistical Database(PATSTAT)to extract global inventive talent mobility information and analyzes the spatial structural evolution of the global inventive talent flow network.The study finds that this network is undergoing a multi-polar transformation,characterized by the rising importance of a few central countries-such as the United States,Germany,and China-and the increasing marginalization of many peripheral countries.In response to this typical phenomenon,the paper constructs an endogenous migration model and conducts empirical testing using the Temporal Exponential Random Graph Model(TERGM).The results reveal several endogenous mechanisms driving global inventive talent flows,including reciprocity,path dependence,convergence effects,transitivity,and cyclic structures,all of which contribute to the network’s multi-polar trend.In addition,differences in regional industrial structures significantly influence talent mobility choices and are a decisive factor in the formation of poles within the multi-polar landscape.Based on these findings,it is suggested that efforts be made to foster two-way channels for talent exchange between China and other global innovation hubs,in order to enhance international collaboration and knowledge flow.We should aim to reduce the migration costs and institutional barriers faced by R&D personnel,thereby encouraging greater mobility of high-skilled talent.Furthermore,the government is advised to strategically leverage regional strengths in high-tech industries as a lever to capture competitive advantages in emerging technologies and products,ultimately strengthening the country’s position in the global innovation landscape.展开更多
To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(...To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(NMR)technology has been developed.The apparatus combines sample evacuation,rapid pressurization and saturation,and controlled displacement,enabling systematic investigation of single-phase shale oil flow under representative reservoir conditions.Related experiments allow proper quantification of the activation thresholds and relative contributions of different pore types to flow.A movable fluid index(MFI),defined using dual T_(2) cutoff values,is introduced accordingly and linked to key flow parameters.The results reveal distinct multi-scale characteristics of single-phase shale oil transport,namely micro-scale graded displacement and macro-scale segmented nonlinear behavior.As the injection-production pressure difference increases,flow pathways are activated progressively,beginning with fractures,followed by large and then smaller macropores,leading to a pronounced enhancement in apparent permeability.Although mesopores and micropores contribute little to direct flow,their indirect influence becomes increasingly important,and apparent permeability gradually approaches a stable limit at higher pressure difference.It is also shown that the MFI exhibits a strong negative correlation with the starting pressure gradient and a positive correlation with apparent permeability,providing a rapid and reliable indicator of shale oil flow capacity.Samples containing through-going fractures display consistently higher MFI values and superior flowability compared with those dominated by laminated fractures,highlighting the pivotal role of well-connected fracture networks generated by large-scale hydraulic fracturing in improving shale oil production.展开更多
Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section...Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.展开更多
The published article titled“MicroRNA-133b Inhibits Proliferation,Cellular Migration,and Invasion via Targeting LASP1 in Hepatocarcinoma Cells”has been retracted from Oncology Research,Vol.25,No.8,2017,pp.1269–1282.
The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet ...The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet dynamics,are demonstrated in the current research.Hereby,the 2nd Stokes problem assumes that the surface,with a thin shared layer of the fluid on it,oscillates in a harmonic manner along the x-axis of the rivulet flow,which coincides with the main flow direction streaming down the underlying surface.We obtain the exact extension of the rivulet flow family,clarifying the structure of the pressure field,which fully absorbs the arising perturbation.The profile of the velocity field is assumed to be Gaussian-type with a non-zero level of plasticity.Hence,the absolutely non-Newtonian case of the viscoplastic flow solution,which satisfies the motion and continuity equations,is considered(with particular cases of exact solutions for pressure).The perturbed governing equations of motion for rivulet flows then result in the Riccati-type ordinary differential equation(ODE),describing the dynamics of the coordinate x(t).The approximated schematic dynamics are presented in graphical plots.展开更多
Adult neurogenesis continuously produces new neurons critical for cognitive plasticity in adult rodents.While it is known transforming growth factor-βsignaling is important in embryonic neurogenesis,its role in postn...Adult neurogenesis continuously produces new neurons critical for cognitive plasticity in adult rodents.While it is known transforming growth factor-βsignaling is important in embryonic neurogenesis,its role in postnatal neurogenesis remains unclear.In this study,to define the precise role of transforming growth factor-βsignaling in postnatal neurogenesis at distinct stages of the neurogenic cascade both in vitro and in vivo,we developed two novel inducible and cell type-specific mouse models to specifically silence transforming growth factor-βsignaling in neural stem cells in(mGFAPcre-ALK5fl/fl-Ai9)or immature neuroblasts in(DCXcreERT2-ALK5fl/fl-Ai9).Our data showed that exogenous transforming growth factor-βtreatment led to inhibition of the proliferation of primary neural stem cells while stimulating their migration.These effects were abolished in activin-like kinase 5(ALK5)knockout primary neural stem cells.Consistent with this,inhibition of transforming growth factor-βsignaling with SB-431542 in wild-type neural stem cells stimulated proliferation while inhibited the migration of neural stem cells.Interestingly,deletion of transforming growth factor-βreceptor in neural stem cells in vivo inhibited the migration of postnatal born neurons in mGFAPcre-ALK5fl/fl-Ai9 mice,while abolishment of transforming growth factor-βsignaling in immature neuroblasts in DCXcreERT2-ALK5fl/fl-Ai9 mice did not affect the migration of these cells in the hippocampus.In summary,our data supports a dual role of transforming growth factor-βsignaling in the proliferation and migration of neural stem cells in vitro.Moreover,our data provides novel insights on cell type-specific-dependent requirements of transforming growth factor-βsignaling on neural stem cell proliferation and migration in vivo.展开更多
High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiat...High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiation resistance.Recent experimental studies have demonstrated that W-Ta-Cr-V alloys exhibit excellent irradiation resistance under helium(He)ion irradiation.However,the underlying mechanisms,especially the migration behavior of He atoms,remain unclear.In this work,the influences of uniaxial tensile and compressive strain on He migration in W-Ta-Cr-V complex alloys have been systematically studied through first-principles calculations.Our results demonstrate that He atoms preferentially occupy the tetrahedral interstitial sites,with interstitial formation energies significantly reduced compared to pure W.The introduction of Ta,Cr,and V alloying elements markedly increases the He migration barriers,effectively suppressing He diffusion.Compressive strain increases the migration barriers,inhibiting He bubbles nucleation and growth,while tensile strain decreases the barriers,facilitating bubble formation.Compared to pure W,the W-Ta-Cr-V alloys exhibit both lower He interstitial formation energies and higher migration barriers,with further enhancement under compressive strain.Specifically,compressive strain of 6%increases the He migration barrier of the W-Ta-Cr-V alloy by 0.166 e V,which further widens the difference relative to pure W.These findings provide a theoretical explanation for the superior irradiation resistance of tungsten-based alloys observed experimentally and promote the understanding of irradiation damage in these alloys under strain.展开更多
The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a...The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a few hundred MeV/u up to 1 GeV/u.It aims to facilitate research on the quantum chromodynamics(QCD)phase structure in the high-baryondensity region.Collective flow is a fundamental observable in heavy-ion collision experiments,providing information on the bulk properties of the produced matter.Although the standard event plane method has been widely used to measure collective flow,it is still important to validate and optimize this method for the CEE spectrometer.In this paper,we study the experimental procedures for measuring directed flow in^(238)U+^(238)U collisions at 500 MeV/u,using event planes reconstructed by Multi-Wire Drift Chamber and Zero Degree Calorimeter,respectively.Jet AA Microscopic(JAM)transport generator is used to generate events,and the detector response is simulated by the CEE Fast Simulation(CFS)package.Finally,the optimal kinematic region for proton directed flow measurements is discussed for the future CEE experiment.展开更多
The Reynolds-averaged Navier-Stokes(RANS)technique enables critical engineering predictions and is widely adopted.However,since this iterative computation relies on the fixed-point iteration,it may converge to unexpec...The Reynolds-averaged Navier-Stokes(RANS)technique enables critical engineering predictions and is widely adopted.However,since this iterative computation relies on the fixed-point iteration,it may converge to unexpected non-physical phase points in practice.We conduct an analysis on the phase-space characteristics and the fixed-point theory underlying the k-ε turbulence model,and employ the classical Kolmogorov flow as a framework,leveraging its direct numerical simulation(DNS)data to construct a one-dimensional(1D)system under periodic/fixed boundary conditions.The RANS results demonstrate that under periodic boundary conditions,the k-ε model exhibits only a unique trivial fixed point,with asymptotes capturing the phase portraits.The stability of this trivial fixed point is determined by a mathematically derived stability phase diagram,indicating the fact that the k-ε model will never converge to correct values under periodic conditions.In contrast,under fixed boundary conditions,the model can yield a stable non-trivial fixed point.The evolutionary mechanisms and their relationship with boundary condition settings systematically explain the inherent limitations of the k-ε model,i.e.,its deficiency in computing the flow field under periodic boundary conditions and sensitivity to boundary-value specifications under fixed boundary conditions.These conclusions are finally validated with the open-source code OpenFOAM.展开更多
Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechani...Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechanism underlying the synergistic reaction remains a critical issue.This study introduces a photothermal synergistic system for the removal of ethyl acetate(EA)by synthesizing Cu-doped OMS-2(denoted as Cu-OMS-2).Under ultraviolet-visible(UV–Vis)irradiation in a flow system,the Cu-OMS-2 catalyst exhibited significantly enhanced performance in the EA degradation process,nearly doubling the effectiveness of pure OMS-2,and increasing carbon dioxide yield by 20%.This exceptional performance is attributed to the synergistic effect of increased oxygen vacancies(OV)at OMS-2 active sites and Cu doping,as confirmed by H2-TPR,O_(2)-TPD,and CO consump-tion measurements.This study clarifies the catalytic mechanism of light-assisted thermocatalysis and offers a novel strategy for designing photothermal catalysts with homogeneous Cu-doped nanorods for VOC removal.展开更多
Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath...Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.展开更多
基金supported by the National Natural Science Foundation of China(42430303)Strategy Priority Research Program(Category B)of the Chinese Academy of Sciences(XDB0710000)+2 种基金National Natural Science Foundation of China(42288201)the National Key R&D Program of China(2023YFF0803203)the IGGCAS start-up funding(Grant No.E251510101).
文摘In wave-equation migration and demigration,the cross-correlation imaging/forwarding step implicitly injects an additional copy of the source wavelet,so that the amplitude spectrum of the wavelet is applied redundantly(effectively imposing a wavelet-spectrum weighting,often akin to an amplitude-squared bias).This redundancy degrades structural fidelity and amplitude balance yet is frequently overlooked.We(i)formalize the mechanism by which cross-correlation duplicates the source-wavelet amplitude effect in both migration and demigration,and(ii)introduce a source-equalized operator that removes the redundancy by deconvolving(or dividing by)the wavelet amplitude spectrum in the imaging condition and its demigration counterpart,while leaving phase/kinematics intact.Using a band-limited Ricker wavelet on a two-layer model and on Marmousi,we show that,if unmanaged,the redundant wavelet spectrum broadens main lobes,introduces ringing,and suppresses vertical resolution in migrated images,and inflates spectrum mismatches between demigrated and observed data even when peak times agree.With our correction,images recover observed-data-consistent bandwidth and sharpened interfaces,and demigrated data also exhibit improved spectrum conformity and reduced amplitude misfit.The results clarify when source amplitudes matter,why cross-correlation makes them redundantly matter,and how a lightweight spectral correction restores physically meaningful amplitude behavior in wave-equation migration/demigration.
基金Supported by the National Natural Science Foundation of China(U21B2069,52274020,52288101,52274022)National Key Research and Development Program of China(2022YFC2806504)。
文摘The gas-liquid countercurrent flow pattern is complex and the bubble migration velocity is difficult to predict in the process of bullheading well killing.The experiment on bubble migration in gas-liquid countercurrent flow in annulus is carried out under different working conditions to reveal how the wellbore inclination angle,liquid phase property and countercurrent liquid velocity affect the bubble deformation and bubble migration trajectory/velocity,and to establish a bubble migration velocity prediction model.The bubbles in the countercurrent flow mainly migrate in two modes:free rising of isolated bubbles,and interactive rising of multiple bubbles.The bubbles migrate by an S-shaped trajectory in the countercurrent flow.With the increase of countercurrent liquid velocity,the lateral oscillation of bubbles is intensified.The increases of wellbore inclination angle,liquid density and liquid viscosity make the bubble migration trajectory gradually to be linear.The bubble is generally ellipsoidal during its rising.The wellbore inclination angle has little effect on the degree of bubble deformation.The bubbles are ellipsoidal during rising,with little influence of wellbore inclination angle on bubble deformation.With the increase of liquid viscosity and density,the aspect ratio of the bubble decreases.As the wellbore inclination angle increases,the bubble migration velocity gradually decreases.As the liquid viscosity increases,the bubble migration velocity decreases.As the liquid density increases,the bubble migration velocity increases slightly.The established bubble migration velocity prediction model yields errors within±15%,and demonstrates broad applicability across a wide range of operating conditions.
基金National Natural Science Foundation of China,No.42361040。
文摘Population migration data derived from location-based services has often been used to delineate population flows between cities or construct intercity relationship networks to reveal and explore the complex interaction patterns underlying human activities.Nevertheless,the inherent heterogeneity in multimodal migration big data has been ignored.This study conducts an in-depth comparison and quantitative analysis through a comprehensive lens of spatial association.Initially,the intercity interactive networks in China were constructed,utilizing migration data from Baidu and AutoNavi collected during the same time period.Subsequently,the characteristics and spatial structure similarities of the two types of intercity interactive networks were quantitatively assessed and analyzed from overall(network)and local(node)perspectives.Furthermore,the precision of these networks at the local scale is corroborated by constructing an intercity network from mobile phone(MP)data.Results indicate that the intercity interactive networks in China,as delineated by Baidu and AutoNavi migration flows,exhibit a high degree of structure equivalence.The correlation coefficient between these two networks is 0.874.Both networks exhibit a pronounced spatial polarization trend and hierarchical structure.This is evident in their distinct core and peripheral structures,as well as in the varying importance and influence of different nodes within the networks.Nevertheless,there are notable differences worthy of attention.Baidu intercity interactive network exhibits pronounced cross-regional effects,and its high-level interactions are characterized by a“rich-club”phenomenon.The AutoNavi intercity interactive network presents a more significant distance attenuation effect,and the high-level interactions display a gradient distribution pattern.Notably,there exists a substantial correlation between the AutoNavi and MP networks at the local scale,evidenced by a high correlation coefficient of 0.954.Furthermore,the“spatial dislocations”phenomenon was observed within the spatial structures at different levels,extracted from the Baidu and AutoNavi intercity networks.However,the measured results of network spatial structure similarity from three dimensions,namely,node location,node size,and local structure,indicate a relatively high similarity and consistency between the two networks.
文摘As the primary functional component of a fusion reactor,the fusion blanket pebble bed,composed of numerous particles,is crucial for tritium breeding,neutron multiplication,and radiation shielding.Particles within tritium-breeding pebble beds are subjected to prolonged neutron irradiation,high thermal loads,and strong magnetic fields in fusion environments.Such conditions render them susceptible to pulverization and fragmentation.The resulting fragments and powders migrate and are deposited into the gas channel,driven by the purge gas.The reduction in the effective flow area of the gas increases the flow resistance,resulting in tritium retention,degraded heat transfer,and other adverse effects.These conditions impair the thermodynamic properties of the pebble beds and hinder the self-maintenance of tritium.Limited information exists on powder migration and clogging mechanisms in fusion blanket pebble beds,particularly under diverse physical conditions.The aim of this study was to use a computational fluid dynamics model coupled with the discrete element method(CFD-DEM)to numerically explore powder migration and clogging in pebble beds.The model considers factors such as breeder orientation,purge velocity,powder size distribution,and friction coefficient.We propose two migration and clogging mechanisms.One involves powder with a large particle size,and the other does not.The results indicate that the powder migration velocity progresses through three stages:rapid decay,linear decay,and stability.Pebble-bed clogging manifests in two forms:extensive superficial clogging and uniform internal clogging.Two fitted curves were used to depict the migration and clogging tendencies.The powder size distribution significantly influenced the powder migration.The breeder orientation,powder size,and friction coefficient affected the distribution of the clogging powders.However,the impact of the purge velocity on powder migration and clogging in pebble beds was limited,and this effect varied significantly with different particle size ratios.Based on the analysis,a formula is proposed to characterize the behavior of the powder in the pebble beds.The results of this study can aid in analyzing and predicting powder dynamics in pebble beds.
文摘To investigate the influence of Al-Zn-Mg-Cu alloy with as-homogenized and as-rolled initial microstructures on the tensile flow behavior,isothermal tensile tests were conducted on a GLEEBLE-3500 isothermal simulator at temperatures of 380-440℃and strain rates of 0.05-1 s^(−1).The Johnson-Cook model,Hensel-Spittel model,strain-compensated Arrhenius model,and critical fracture strain model were established.Results show that through the evaluation of the models using the correlation coefficient(R)and the average absolute relative error,the strain-compensated Arrhenius model can represent the flow behavior of the alloy more accurately.Shear bands are more pronounced in the as-homogenized specimens,whereas dynamic recrystallization is predominantly observed in as-rolled specimens.Fracture morphology analysis reveals that a mixed fracture mechanism is prevalent in the as-homogenized specimen,whereas a ductile fracture mechanism is predominant in the as-rolled specimen.The processing maps indicate that the unstable region is reduced in the as-rolled specimens compared with that in the as-homogenized specimens.The optimal hot working windows for the as-homogenized and as-rolled specimens are determined as 410-440℃/0.14-1 s^(−1)and 380-400℃/0.05-0.29 s^(−1),respectively.
基金support from the National Natural Science Foundation of China(No.52174305).
文摘A 3D mathematical model was established to investigate the gas-liquid two-phase flow in Ruhrstahl-Heraeus(RH)vacuum refining process.The flow characteristics of molten steel were calculated using the coupled standard k-εmodel and volume of fluid model.The bubble distribution was tracked by discrete phase model.Electromagnetic field was applied in the up-leg snorkel to enhance the effect of vacuum refining.The effect of swirling flow nozzles combined with electromagnetic stirring(EMS)on the flow characteristics of molten steel and bubble distribution was analyzed.The erosion of the up-leg snorkel was compared.The results show that when the swirling flow nozzles are used,the bubbles exhibit a distinct adherent rising behavior,and the refining efficiency decreases.In addition,the electromagnetic field can significantly improve the refining efficiency,but it brings stronger erosion to the up-leg snorkel.Nevertheless,when using the swirling flow nozzles combined with EMS,the refining performance is further optimized,and the erosion of the up-leg snorkel is also reduced due to its characteristic of bubble distribution.Compared to conventional nozzles,the mixing time was shortened by 16.2%,the recirculation rate increased by 12.5%.and the swirling intensity was strengthened by 8.9%.
文摘Breast cancer(BRCA)is characterized by high heterogeneity,with aggressive subtypes frequently showing poor prognosis and resistance to conventional therapies,making the discovery of new therapeutic targets and strategies imperative.Although elevated expression of discs large homolog 3(DLG3)has been reported in BRCA,its functional role in disease progression remains unclear.We performed bioinformatic analyses of clinical datasets to evaluate the prognostic significance of DLG3 expression in BRCA patients.In vitro gain-and loss-of-function experiments were conducted to assess the impact of DLG3 on BRCA cell proliferation,migration,and colony formation.Transcriptomic profiling,coupled with pharmacological inhibition,was employed to identify and validate downstream signaling pathways.Additionally,we extended our validation to an in vivo model to assess the role of DLG3 in tumor progression.We found that elevated DLG3 levels correlated with poor prognosis in breast cancer patients.Functionally,DLG3 overexpression significantly promoted cell proliferation and migration in estrogen receptor-positive MCF7 and triple-negative MDA-MB-231 breast cancer cells,whereas its knockdown suppressed these effects.Transcriptomic analyses revealed that DLG3 activates signal transducer and activator of transcription 3(STAT3)signaling,a finding further corroborated by Western blot.Critically,treatment with the STAT3 inhibitor Stattic attenuated DLG3-driven proliferation and migration,supporting a DLG3-STAT3 oncogenic axis.Furthermore,in vivo studies validated the role of DLG3 in promoting tumor growth and its correlation with elevated STAT3 signaling,consistent with our in vitro findings.Our findings establish DLG3 as a novel driver of breast cancer progression that directly activates STAT3 signaling.DLG3 thus represents both a potential prognostic biomarker and a promising therapeutic target for aggressive breast cancer subtypes,including triple-negative breast cancer.
基金supported by the Major Project of the National Social Science Fund of China,titled“Design Path Selection for the Mechanism of New and Old Growth Driver Conversion”(Grant No.18ZDA077)by the Joint Special Major Research Project of the Yangtze River Delta Economics and Social Development Research Center at Nanjing University and the Collaborative Innovation Center for China Economy(CICCE),titled“Practicing Innovation in China’s Development Economics for the Yangtze River Delta:From Industrial Clusters to Technological Clusters”(Grant No.CYD2022006).
文摘The global clustering of inventive talent shapes innovation capacity and drives economic growth.For China,this process is especially crucial in sustaining its development momentum.This paper draws on data from the EPO Worldwide Patent Statistical Database(PATSTAT)to extract global inventive talent mobility information and analyzes the spatial structural evolution of the global inventive talent flow network.The study finds that this network is undergoing a multi-polar transformation,characterized by the rising importance of a few central countries-such as the United States,Germany,and China-and the increasing marginalization of many peripheral countries.In response to this typical phenomenon,the paper constructs an endogenous migration model and conducts empirical testing using the Temporal Exponential Random Graph Model(TERGM).The results reveal several endogenous mechanisms driving global inventive talent flows,including reciprocity,path dependence,convergence effects,transitivity,and cyclic structures,all of which contribute to the network’s multi-polar trend.In addition,differences in regional industrial structures significantly influence talent mobility choices and are a decisive factor in the formation of poles within the multi-polar landscape.Based on these findings,it is suggested that efforts be made to foster two-way channels for talent exchange between China and other global innovation hubs,in order to enhance international collaboration and knowledge flow.We should aim to reduce the migration costs and institutional barriers faced by R&D personnel,thereby encouraging greater mobility of high-skilled talent.Furthermore,the government is advised to strategically leverage regional strengths in high-tech industries as a lever to capture competitive advantages in emerging technologies and products,ultimately strengthening the country’s position in the global innovation landscape.
基金supported by the National Science and Technology Major Project of China(Grant No.2024ZD 1004302)the Key Scientific and Technological Research project of SINOPEC(Grant No.P25186).
文摘To clarify fluid flow mechanisms and establish effective development conditions in continental shale oil reservoirs,a high-temperature,high-pressure steady-state flow system integrated with nuclear magnetic resonance(NMR)technology has been developed.The apparatus combines sample evacuation,rapid pressurization and saturation,and controlled displacement,enabling systematic investigation of single-phase shale oil flow under representative reservoir conditions.Related experiments allow proper quantification of the activation thresholds and relative contributions of different pore types to flow.A movable fluid index(MFI),defined using dual T_(2) cutoff values,is introduced accordingly and linked to key flow parameters.The results reveal distinct multi-scale characteristics of single-phase shale oil transport,namely micro-scale graded displacement and macro-scale segmented nonlinear behavior.As the injection-production pressure difference increases,flow pathways are activated progressively,beginning with fractures,followed by large and then smaller macropores,leading to a pronounced enhancement in apparent permeability.Although mesopores and micropores contribute little to direct flow,their indirect influence becomes increasingly important,and apparent permeability gradually approaches a stable limit at higher pressure difference.It is also shown that the MFI exhibits a strong negative correlation with the starting pressure gradient and a positive correlation with apparent permeability,providing a rapid and reliable indicator of shale oil flow capacity.Samples containing through-going fractures display consistently higher MFI values and superior flowability compared with those dominated by laminated fractures,highlighting the pivotal role of well-connected fracture networks generated by large-scale hydraulic fracturing in improving shale oil production.
基金financially supported by Youth Science“Research on Failure Mechanism and Evaluation Method of Sand Control Measures for Railway Machinery in Sandy Area”(12302511)Ningxia Transportation Department Science and Technology Project(20200173)The Central Guidance on Local Science and Technology Development Funds(22ZY1QA005)。
文摘Investigating the wind-sand flow response regularity in the longitudinal slope sections of desert highways provides a scientific basis for selecting the slope of desert roads.This study uses the Tengger Desert section of the Wuhai-Maqin Expressway as a case study,employing CFD numerical simulation methods to calculate and analyze the wind-sand flow field distribution characteristics in different longitudinal slope sections.The results show that:(1)Along with the direction of the incoming flow,the windward and leeward slope toes of the embankment are low-wind-speed zones,with the wind speed at the leeward slope toe being even lower.The higher the embankment,the larger the low-wind-speed zone at the windward and leeward slope toes.As the longitudinal slope increases,the extent of the lowwind-speed zone at the same location along the route also increases.(2)Along the route direction,the wind speed at the windward and leeward slope toes decreases as embankment height increases.At the embankment toe,sand particles are transported from the top to the bottom of the longitudinal slope,and the greater the longitudinal slope,the stronger the transport effect.(3)Along the route direction,the sand accumulation around the embankment gradually gathers toward the bottom of the longitudinal slope as the slope increases.When the longitudinal slope is 3%and 4%,the trend of sand accumulation moving from the windward side at the end of the route to the leeward side at the start of the route is more significant.When the longitudinal slope is less than or equal to 3%,severe sand accumulation within the embankment range is reduced by 86.4%or more compared to when the slope is 4%.(4)Under the same longitudinal slope,the higher the embankment height,the smaller its transport rate.When the embankment height is the same,the greater the longitudinal slope,the greater the embankment transport rate.
文摘The published article titled“MicroRNA-133b Inhibits Proliferation,Cellular Migration,and Invasion via Targeting LASP1 in Hepatocarcinoma Cells”has been retracted from Oncology Research,Vol.25,No.8,2017,pp.1269–1282.
文摘The newly formulated non-Newtonian rivulet flows streaming down an inclined planar surface,with additional periodic perturbations arising from the application of the 2nd Stokes problem to the investigation of rivulet dynamics,are demonstrated in the current research.Hereby,the 2nd Stokes problem assumes that the surface,with a thin shared layer of the fluid on it,oscillates in a harmonic manner along the x-axis of the rivulet flow,which coincides with the main flow direction streaming down the underlying surface.We obtain the exact extension of the rivulet flow family,clarifying the structure of the pressure field,which fully absorbs the arising perturbation.The profile of the velocity field is assumed to be Gaussian-type with a non-zero level of plasticity.Hence,the absolutely non-Newtonian case of the viscoplastic flow solution,which satisfies the motion and continuity equations,is considered(with particular cases of exact solutions for pressure).The perturbed governing equations of motion for rivulet flows then result in the Riccati-type ordinary differential equation(ODE),describing the dynamics of the coordinate x(t).The approximated schematic dynamics are presented in graphical plots.
基金supported by NIH grants,Nos.R01NS125074,R01AG083164,R01NS107365,and R21NS127177(to YL),1F31NS129204-01A1(to KW)and Albert Ryan Fellowship(to KW).
文摘Adult neurogenesis continuously produces new neurons critical for cognitive plasticity in adult rodents.While it is known transforming growth factor-βsignaling is important in embryonic neurogenesis,its role in postnatal neurogenesis remains unclear.In this study,to define the precise role of transforming growth factor-βsignaling in postnatal neurogenesis at distinct stages of the neurogenic cascade both in vitro and in vivo,we developed two novel inducible and cell type-specific mouse models to specifically silence transforming growth factor-βsignaling in neural stem cells in(mGFAPcre-ALK5fl/fl-Ai9)or immature neuroblasts in(DCXcreERT2-ALK5fl/fl-Ai9).Our data showed that exogenous transforming growth factor-βtreatment led to inhibition of the proliferation of primary neural stem cells while stimulating their migration.These effects were abolished in activin-like kinase 5(ALK5)knockout primary neural stem cells.Consistent with this,inhibition of transforming growth factor-βsignaling with SB-431542 in wild-type neural stem cells stimulated proliferation while inhibited the migration of neural stem cells.Interestingly,deletion of transforming growth factor-βreceptor in neural stem cells in vivo inhibited the migration of postnatal born neurons in mGFAPcre-ALK5fl/fl-Ai9 mice,while abolishment of transforming growth factor-βsignaling in immature neuroblasts in DCXcreERT2-ALK5fl/fl-Ai9 mice did not affect the migration of these cells in the hippocampus.In summary,our data supports a dual role of transforming growth factor-βsignaling in the proliferation and migration of neural stem cells in vitro.Moreover,our data provides novel insights on cell type-specific-dependent requirements of transforming growth factor-βsignaling on neural stem cell proliferation and migration in vivo.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11505003 and 52325103)the Anhui Provincial Natural Science Foundation(Grant No.2108085MA25)。
文摘High-performance intelligent protective materials are vital for nuclear energy systems exposed to extreme irradiation.Among them,tungsten-based alloys demonstrate exceptional potential owing to their superior irradiation resistance.Recent experimental studies have demonstrated that W-Ta-Cr-V alloys exhibit excellent irradiation resistance under helium(He)ion irradiation.However,the underlying mechanisms,especially the migration behavior of He atoms,remain unclear.In this work,the influences of uniaxial tensile and compressive strain on He migration in W-Ta-Cr-V complex alloys have been systematically studied through first-principles calculations.Our results demonstrate that He atoms preferentially occupy the tetrahedral interstitial sites,with interstitial formation energies significantly reduced compared to pure W.The introduction of Ta,Cr,and V alloying elements markedly increases the He migration barriers,effectively suppressing He diffusion.Compressive strain increases the migration barriers,inhibiting He bubbles nucleation and growth,while tensile strain decreases the barriers,facilitating bubble formation.Compared to pure W,the W-Ta-Cr-V alloys exhibit both lower He interstitial formation energies and higher migration barriers,with further enhancement under compressive strain.Specifically,compressive strain of 6%increases the He migration barrier of the W-Ta-Cr-V alloy by 0.166 e V,which further widens the difference relative to pure W.These findings provide a theoretical explanation for the superior irradiation resistance of tungsten-based alloys observed experimentally and promote the understanding of irradiation damage in these alloys under strain.
基金supported in part by the National Key R&D Program of China(No.2024YFA1610700)the National Natural Science Foundation of China(No.12475147)。
文摘The Cooling-Storage-Ring External-target Experiment(CEE)at the Heavy Ion Research Facility in Lanzhou(HIRFL)is designed to study the properties of nuclear matter created in heavy-ion collisions at beam energies from a few hundred MeV/u up to 1 GeV/u.It aims to facilitate research on the quantum chromodynamics(QCD)phase structure in the high-baryondensity region.Collective flow is a fundamental observable in heavy-ion collision experiments,providing information on the bulk properties of the produced matter.Although the standard event plane method has been widely used to measure collective flow,it is still important to validate and optimize this method for the CEE spectrometer.In this paper,we study the experimental procedures for measuring directed flow in^(238)U+^(238)U collisions at 500 MeV/u,using event planes reconstructed by Multi-Wire Drift Chamber and Zero Degree Calorimeter,respectively.Jet AA Microscopic(JAM)transport generator is used to generate events,and the detector response is simulated by the CEE Fast Simulation(CFS)package.Finally,the optimal kinematic region for proton directed flow measurements is discussed for the future CEE experiment.
基金Project supported by the National Natural Science Foundation of China(Nos.12372214 and U2341231)。
文摘The Reynolds-averaged Navier-Stokes(RANS)technique enables critical engineering predictions and is widely adopted.However,since this iterative computation relies on the fixed-point iteration,it may converge to unexpected non-physical phase points in practice.We conduct an analysis on the phase-space characteristics and the fixed-point theory underlying the k-ε turbulence model,and employ the classical Kolmogorov flow as a framework,leveraging its direct numerical simulation(DNS)data to construct a one-dimensional(1D)system under periodic/fixed boundary conditions.The RANS results demonstrate that under periodic boundary conditions,the k-ε model exhibits only a unique trivial fixed point,with asymptotes capturing the phase portraits.The stability of this trivial fixed point is determined by a mathematically derived stability phase diagram,indicating the fact that the k-ε model will never converge to correct values under periodic conditions.In contrast,under fixed boundary conditions,the model can yield a stable non-trivial fixed point.The evolutionary mechanisms and their relationship with boundary condition settings systematically explain the inherent limitations of the k-ε model,i.e.,its deficiency in computing the flow field under periodic boundary conditions and sensitivity to boundary-value specifications under fixed boundary conditions.These conclusions are finally validated with the open-source code OpenFOAM.
基金supported by the Qilu University of Technology(Shandong Academy of Sciences),the Basic Research Project of Science,Education and Industry Integration Pilot Project(No.2022PY047).
文摘Photothermal synergistic catalytic systems for treating volatile organic compounds(VOCs)have attracted signif-icant attention due to their energy efficiency and potential to reduce carbon emissions.However,the mechanism underlying the synergistic reaction remains a critical issue.This study introduces a photothermal synergistic system for the removal of ethyl acetate(EA)by synthesizing Cu-doped OMS-2(denoted as Cu-OMS-2).Under ultraviolet-visible(UV–Vis)irradiation in a flow system,the Cu-OMS-2 catalyst exhibited significantly enhanced performance in the EA degradation process,nearly doubling the effectiveness of pure OMS-2,and increasing carbon dioxide yield by 20%.This exceptional performance is attributed to the synergistic effect of increased oxygen vacancies(OV)at OMS-2 active sites and Cu doping,as confirmed by H2-TPR,O_(2)-TPD,and CO consump-tion measurements.This study clarifies the catalytic mechanism of light-assisted thermocatalysis and offers a novel strategy for designing photothermal catalysts with homogeneous Cu-doped nanorods for VOC removal.
基金supported by the National Natural Science Foundation of China(Grant No.52374317).
文摘Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.
