Titanium(Ti)and its alloys are frequently utilized as critical components in a variety of engineering ap-plications because of their high specific strength and excellent corrosion resistance.Compared to conven-tional ...Titanium(Ti)and its alloys are frequently utilized as critical components in a variety of engineering ap-plications because of their high specific strength and excellent corrosion resistance.Compared to conven-tional surface strengthening technologies,laser shock peening(LSP)has increasingly attracted attention from researchers and industries,since it significantly improves the surface strength,biocompatibility,fa-tigue resistance,and anti-corrosion ability of Ti and its alloys.Despite numerous studies that have been carried out to elucidate the effects of LSP on microstructural evolution and mechanical properties of Ti and its alloys in recent years,a comprehensive review of recent advancements in the field of Ti and its alloys subjected to LSP is still lacking.In this review,the standard LSP and the novel process designs of LSP assisted by thermal,cryogenic,electropulsing and magnetic fields are discussed and compared.Microstructural evolution,with focuses on the dislocation dynamics,deformation twinning,grain refine-ment and surface amorphization,during LSP processing of Ti alloys is reviewed.Furthermore,the en-hanced engineering performance of the L SP-processed(L SPed)Ti alloys,including surface hardness,wear resistance,fatigue life and corrosion resistance are summarized.Finally,this review concludes by present-ing an overview of the current challenges encountered in this field and offering insights into anticipated future trends.展开更多
The hot deformation behavior of the premium GH4738 alloy was investigated in the temperature range of 1313 to 1353 K at strain rates of 0.01 to 1 s^(−1)using the hot compression test.To accurately predict flow stress,...The hot deformation behavior of the premium GH4738 alloy was investigated in the temperature range of 1313 to 1353 K at strain rates of 0.01 to 1 s^(−1)using the hot compression test.To accurately predict flow stress,three novel strain compensation constitutive equations were developed and rigorously assessed.The results indicate that the power function model(correlation coefficients r=0.98544)demonstrates greater prediction accuracy compared to other functions,with a calculated average activation energy of 507.968 kJ mol−1.Additionally,electron backscattered diffraction technology and transmission electron microscopy were used to analyze the evolution of the alloy microstructure during dynamic recrystallization under different deformation conditions.The results show that under high-temperature and large deformation conditions,the dislocation density and the degree of grain rotation increase,which promotes the formation and growth of new recrystallized grains,so that recrystallization is completed when the deformation amount reaches 30%.Besides,the increase in the temperature not only enhances the thermal activation mechanism,but also improves the grain size uniformity and texture consistency.Meanwhile,the carbide inhibits grain overgrowth by pinning grain boundaries,maintaining a fine and uniform grain structure of the alloy,and thereby improving the plasticity of the material.展开更多
Solution and aging treatment were conducted on the laser directed energy deposition(LDED)-prepared carbon nanotubes(CNTs)-reinforced WE43(CNTs/WE43)layers to optimize their microstructure and surface properties in thi...Solution and aging treatment were conducted on the laser directed energy deposition(LDED)-prepared carbon nanotubes(CNTs)-reinforced WE43(CNTs/WE43)layers to optimize their microstructure and surface properties in this study.The microstructure of the WE43 and CNTs/WE43 layers was systematically compared.The dissolution of divorced eutectics at the grain boundaries was retarded by CNTs during solution treatment.The spot segregation composed of Mg_(24)Y_(5),CNTs,and Zr cores in the solution treated CNTs/WE43 layer presented a slight decreasing in Y content.The grain growth of both types of layers underwent three stages:slow,rapid,and steady-state.The significant inhibitory effect of CNTs on the grain growth of the LDED WE43 matrix was more pronounced than the promoting effect of temperature,resulting in a 47%increase at 510℃ and a 35%increase at 540℃ in the grain growth exponent compared to the WE43 layers at 510℃.During the subsequent aging treatment at 225℃,the precipitation sequences from plate-shaped β″to plate-shaped and globular β′ were observed in both types of layers.CNTs can facilitate an increase in the nucleation rate of precipitates,but without accelerating precipitation hardening rate.The long and short diameters of the precipitates in peak-aged state were decreased by 48.5%and 43.1%by addition of CNTs,respectively.The wear resistance of both the WE43 and CNTs/WE43 layers can be significantly enhanced through solution and aging treatment.The enhancement in wear resistance for the CNTs/WE43 layers is considerably greater than that of the WE43 layers.展开更多
The microstructure evolution and deformation mechanism of a DZ125 superalloy during high-temperature creep were studied by means of microstructure observation and creep-property tests.The results show that at the init...The microstructure evolution and deformation mechanism of a DZ125 superalloy during high-temperature creep were studied by means of microstructure observation and creep-property tests.The results show that at the initial stage of high-temperature creep,two sets of dislocations with different Burgers vectors move and meet inγmatrix channels,and react to form a quadrilateral dislocation network.Andγ′phases with raft-like microstructure are generated after the formation of dislocation networks.As creep progresses,the quadrilateral dislocation network is gradually transformed into hexagonal and quadrilateral dislocation networks.During steady stage of creep,the superalloy undergoes deformation with the mechanism that a great number of dislocations slip and climb in the matrix across the raft-likeγ′phases.At the later stage of creep,the raft-likeγ′phases are sheared by dislocations at the breakage of dislocation networks,and then alternate slip occurs,which distorts and breaks the raft-likeγ′/γphases,resulting in the accumulation of micropores at the raft-likeγ′/γinterfaces and the formation of microcracks.As creep continues,the microcracks continue to expand until creep fracture occurs,which is the damage and fracture mechanism of the alloy at the later stage of creep at high temperature.展开更多
The hot deformation behavior of as-extruded Ti-6554 alloy was investigated through isothermal compression at 700–950°C and 0.001–1 s^(−1).The temperature rise under different deformation conditions was calculat...The hot deformation behavior of as-extruded Ti-6554 alloy was investigated through isothermal compression at 700–950°C and 0.001–1 s^(−1).The temperature rise under different deformation conditions was calculated,and the curve was corrected.The strain compensation constitutive model of as-extruded Ti-6554 alloy based on temperature rise correction was established.The microstructure evolution under different conditions was analyzed,and the dynamic recrystallization(DRX)mechanism was revealed.The results show that the flow stress decreases with the increase in strain rate and the decrease in deformation temperature.The deformation temperature rise gradually increases with the increase in strain rate and the decrease in deformation temperature.At 700°C/1 s^(−1),the temperature rise reaches 100°C.The corrected curve value is higher than the measured value,and the strain compensation constitutive model has high prediction accuracy.The precipitation of theαphase occurs during deformation in the twophase region,which promotes DRX process of theβphase.At low strain rate,the volume fraction of dynamic recrystallization increases with the increase in deformation temperature.DRX mechanism includes continuous DRX and discontinuous DRX.展开更多
The hot compression curves and deformed microstructures were investigated under various hot deformation conditions in three states:hot isostatic pressing(HIP,A1),HIP+hot extrusion at 1100℃(A2),and HIP+hot extrusion a...The hot compression curves and deformed microstructures were investigated under various hot deformation conditions in three states:hot isostatic pressing(HIP,A1),HIP+hot extrusion at 1100℃(A2),and HIP+hot extrusion at 1150℃(A3).The results show that A2 sample,extruded at 1100℃ with uniform γ+γ′duplex microstructures,demonstrates excellent hot deformation behavior at both 1050 and 1100℃.The true stress-true strain curves of A2 sample maintain a hardening-softening equilibrium over a larger strain range,with post-deformation average grain size of 5μm.The as-HIPed A1 sample and 1150℃ extruded A3 sample exhibit a softening region in deformation curves at 1050℃,and the grain microstructures reflect an incomplete recrystallized state,i.e.combination of fine recrystallized grains and initial larger grains,characterized by a necklace-like microstructure.The predominant recrystallization mechanism for these samples is strain-induced boundary migration.At 1150℃ with a strain rate of 0.001 s^(-1),the influence of the initial microstructure on hot deformation behavior and resultant microstructure is relatively less pronounced,and postdeformation microstructures are fully recrystallized grains.Fine-grained microstructures are conducive to maximizing the hot deformation potential of alloy.By judiciously adjusting deformation regimes,a fine and uniform deformed microstructure can be obtained.展开更多
The microstructure evolution and strengthening ability of natural aging(NA),delayed aging(DA),and DA after pre-aging(PDA)of Al-Mg-Si alloy were studied.Results show that small and unstable atomic clusters are generate...The microstructure evolution and strengthening ability of natural aging(NA),delayed aging(DA),and DA after pre-aging(PDA)of Al-Mg-Si alloy were studied.Results show that small and unstable atomic clusters are generated during NA,leading to the formation of low-density coarseβʺandβ′phases,thus reducing the strength of DA alloy.However,atomic clusters and GP zones with larger sizes and high Mg/Si molar ratio form during pre-aging treatment.They prevent the generation of clusters during NA and can serve as effective nucleation sites in subsequent artificial aging,which elevates the number density of fineβʺprecipitates and improves the alloy strength.After pre-aging at 175°C,the strengthening capacity of PDA alloy is restored,with hardness and yield strength reaching 95.1%and 101.9%of peak-aged alloy.展开更多
Magnesium is distinguished by its highly anisotropic inelastic deformation involving a profuse activity of deformation twinning.Instrumented micro/nano-indentation technique has been widely applied to characterize the...Magnesium is distinguished by its highly anisotropic inelastic deformation involving a profuse activity of deformation twinning.Instrumented micro/nano-indentation technique has been widely applied to characterize the mechanical properties of magnesium,typically through the analysis of the indentation load-depth response,surface topography,and less commonly,the post-mortem microstructure within the bulk material.However,experimental limitations prevent the real-time observation of the evolving microstructure.To bridge this gap,we employ a recently-developed finite-strain model that couples the phase-field method and conventional crystal plasticity to simulate the evolution of the indentation-induced twin microstructure and its interaction with plastic slip in a magnesium single-crystal.Particular emphasis is placed on two aspects:orientation-dependent inelastic deformation and indentation size effects.Several outcomes of our 2D computational study are consistent with prior experimental observations.Chief among them is the intricate morphology of twin microstructure obtained at large spatial scales,which,to our knowledge,represents a level of detail that has not been captured in previous modeling studies.To further elucidate on size effects,we extend the model by incorporating gradient-enhanced crystal plasticity,and re-examine the notion of‘smaller is stronger’.The corresponding results underscore the dominant influence of gradient plasticity over the interfacial energy of twin boundaries in governing the size-dependent mechanical response.展开更多
Li/MnO_(2) primary batteries are widely used in industry for their high specific capacity and safety.However,a deep comprehension of the Li^(+)insertion mechanism and the high self-discharge rate of the batteries is s...Li/MnO_(2) primary batteries are widely used in industry for their high specific capacity and safety.However,a deep comprehension of the Li^(+)insertion mechanism and the high self-discharge rate of the batteries is still needed.Here,the storage mechanism of Li^(+)in the tunnel structure of MnO_(2) as well as the dissolution and migration of Mn-ions were investigated based on multi-scale approaches.The Li/Mn ratio(at%)is determined at about 0.82 when the discharge voltage decreases to 2 V.The limited Li-ions transport rate in the bulk MnO_(2) restrains the reduction reaction,resulting in a low practical specific capacity.Moreover,utilizing spherical aberration-corrected transmission electron microscopy(TEM)coupled with electron energy loss spectroscopy(EELS),the presence of a mixed valence state layer of Mn^(2+)/Mn^(3+)/Mn^(4+)on the surface of the original 20 nm MnO_(2) particles was identified,which could contribute to the initial dissolution of Mn-ions.The battery separator exhibited channels for Mn-ions migration and diffusion and aggregated Mn particles.We put forward the discharge and degradation route in the ways of Mn-ions trajectories,and our findings provide a deep understanding of the high self-discharge rates and the capacity decay of Li-Mn primary batteries.展开更多
The corrosion behavior of the tungsten inert gas(TIG)welded Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy with different post-weld heat treatments was systematically investigated.The results show that the corrosion resistance of the s...The corrosion behavior of the tungsten inert gas(TIG)welded Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy with different post-weld heat treatments was systematically investigated.The results show that the corrosion resistance of the sand-cast base material(BM)was inferior to that of the fusion zone(FZ),which was attributed to the larger grain size and exacerbated galvanic corrosion caused by coarser Mg_3(Nd,Gd)eutectic phases and numerousβprecipitates.It is found that post-weld solid-solution(T4)treatment could significantly enhance the corrosion resistance of the joint due to the dissolution of the cathodic second phases and the denser protective film abundant in RE oxides generated in corrosive solution.The precipitation of nanosized phases and Zn-Zr clusters would slightly increase the susceptibility to localized corrosion of the peak-aged(T6) joint.As the main corrosion products,MgO and Mg(OH)_(2) are distributed throughout the whole corrosion film,while RE oxides and RE hydroxides are mainly distributed in the inner layer,which can be explained by inward oxidation and replacement reactions between RE elements and MgO/Mg(OH)_(2).Based on the composition and structure of the corrosion product film,a physical model has been proposed for depicting the microstructure evolution associated with the corresponding corrosion behavior of the joints.This work could promote the applications of welded Mg-RE alloy joint in some corrosion environments.展开更多
The hot deformation behavior of GH3230 superalloy under selected deformation conditions ranging from 950 to 1150℃with strain rates ranging from 0.01 to 10 s^(–1)was studied through isothermal hot compression experim...The hot deformation behavior of GH3230 superalloy under selected deformation conditions ranging from 950 to 1150℃with strain rates ranging from 0.01 to 10 s^(–1)was studied through isothermal hot compression experiments.Based on the obtained flow stresses,a strain-compensated Arrhenius-type model was developed for the description of hot deformation behavior,and the consistency of the predicted flow stresses with the experimental values confirms the accuracy of the developed model.Furthermore,the processing maps were constructed and classified into the instability domain,low-dissipation stability domain and high-dissipation stability domain in accordance with the dynamic material model and the instability criterion.Microstructure observations indicated that the instability domain exhibits the adiabatic shear bands formation,and the low-power dissipation domain exhibits partial dynamic recrystallization(DRX),with the temperature increase/strain rate decrease being favorable for the DRX.The high-dissipation stability domain was occupied by uniformly fine equiaxed grains,and was identified as the optimal processing window,which corresponds to the deformation conditions at 1070–1150℃ with strain rates ranging from 0.01 to 0.15 s^(–1).Moreover,various DRX mechanisms are observed to occur during the hot deformation,which include the discontinuous dynamic recrystallization,characterized by nucleation at bulged boundaries,the continuous dynamic recrystallization with subgrain progressive rotation and the particle stimulated nucleation mechanism with stimulated nucleation of carbide particles.展开更多
Multimodal ultrasonic vibration(UV)assisted micro-forming has been widely investigated for its advantages of further reducing forming loads and improving forming quality.However,the influence mechanism of different UV...Multimodal ultrasonic vibration(UV)assisted micro-forming has been widely investigated for its advantages of further reducing forming loads and improving forming quality.However,the influence mechanism of different UV modes on microstructure evolution and mechanical properties was still unclear.Mul-timodal UV assisted micro-compression tests on T2 copper with different grains and sample sizes were conducted in this study.The microstructure evolution for different UV modes was observed by EBSD.The results showed that the true stress reduction caused by UV was increased sequentially with tool ultrasonic vibration(TV),mold ultrasonic vibration(MV)and compound ultrasonic vibration(CV).The region of grain deformation was shifted along the direction of UV,and the MV promoted the uniform distribution of deformation stress.The grain refinement,fiber streamline density,grain deformation and rotation degree were further enhanced under CV,due to the synergistic effect of TV and MV.Additionally,a coupled theoretical model considering both acoustic softening effect and size effect was proposed for describing the mechanical properties.And a physical model of dislocation motion in different UV modes was developed for describing the microstructure evolution.The maximum error between the theoretical and experimental results was only 2.39%.This study provides a theoretical basis for the optimization of UV assisted micro-forming process.展开更多
Casting experiments and macro-micro numerical simulations were conducted to examine the microstructure characteristics of K439B nickel-based superalloy casting with varying cross-sections during the gravity investment...Casting experiments and macro-micro numerical simulations were conducted to examine the microstructure characteristics of K439B nickel-based superalloy casting with varying cross-sections during the gravity investment casting process.Firstly,microstructure analysis was conducted on the casting using scanning electron microscopy(SEM)and electron backscatter diffraction(EBSD).Subsequently,calculation of the phase diagram and differential scanning calorimetry(DSC)tests were conducted to determine the macro-micro simulation parameters of the K439B alloy,and the cellular automaton finite element(CAFE)method was employed to develop macro-micro modeling of K439B nickel-based superalloy casting with varying cross-sections.The experimental results revealed that the ratio of the average grain area increased from the edge to the center of the sections as the ratio of the cross-sectional area increased.The simulation results indicated that the average grain area increased from 0.885 to 0.956 mm^(2)as the ratio of the cross-sections increased from 6꞉1 to 12꞉1.The experiment and simulation results showed that the grain size became more heterogeneous and the grain shape became more irregular with an increase in the ratio of the cross-sectional area of the casting.CAFE modeling was an effective method to simulate the microstructure evolution of the K439B alloy and ensure the accuracy of the simulation.展开更多
The Cu/1010 steel bimetal laminated composites(BLCs)were rolled to different thicknesses to investigate the effect of rolling direction and reduction on the microstructure evolution and mechanical properties.The diffe...The Cu/1010 steel bimetal laminated composites(BLCs)were rolled to different thicknesses to investigate the effect of rolling direction and reduction on the microstructure evolution and mechanical properties.The difference of mechanical properties between the Cu and 1010 steel causes different thickness reductions,percentage spread,and cladding ratios.The formation of strong texture induces larger strength of the rolled samples,and as the volume fraction of 1010 steel is larger in Route-A,its strength is consistently greater than that in Route-B.The obstruction of interface to crystal and dislocation slip results in the formation of interface distortion,inducing dislocation density gradient when the rolling reduction is low in Route-A.The slip planes of the Cu and 1010 steel are more prone to suffer the normal strain,while the shear strain of other crystal planes is obviously larger than the normal strain under rolling load near the interface.展开更多
This article reports a systematic investigation on the relationship between the microstructure evolution and mechanical properties of as-cast Mg-9.5Gd-2.3Y-1Zn-0.5Zr(VW92,wt.%)alloy during aging treatment.The results ...This article reports a systematic investigation on the relationship between the microstructure evolution and mechanical properties of as-cast Mg-9.5Gd-2.3Y-1Zn-0.5Zr(VW92,wt.%)alloy during aging treatment.The results indicate that the alloy exhibits obvious double peak-aging characteristics at 180℃,200℃,and 220℃;the first peak-aging appeared at 96 h,48 h,and 48 h,respectively,while the second peak-aging occurred at 204 h,180 h,and 180 h,respectively.Moreover,the strengths of the first peak-aging were higher than those of the second peak-aging.Consequently,the first peak-aging at 200℃ achieved the best mechanical properties,with ultimate tensile strength(UTS),yield strength(YS),and elongation(EL)of 380(±2.0)MPa,255(±1.8)MPa,and 12.8(±1.7)%,respectively.While the strength decreased in the second peak-aging,the elongation increased to 17.2(±0.5)%.The first peak-aging strengthening is ascribed to the participation of the nano-β' phases in the matrix and the long period stacking ordered(LPSO)phases at grain boundaries(GBs).Additionally,the second peak-aging strengthening is associated with the emergence of a relatively new 3D structure comprising longchain-like structural phases β'+β'_(F) tβ_(1),γ' phases,and LPSO phases within the grain,combined with the fine and uniform LPSO phases at the GBs.展开更多
In dry storage,spent fuel is typically stored in casks constructed from neutron absorbing materials(NAMs).The(B_(4)C+Al_(2)O_(3))/Al composite,which incorporates in-situ amorphous Al_(2)O_(3)(am-Al_(2)O_(3))formed on ...In dry storage,spent fuel is typically stored in casks constructed from neutron absorbing materials(NAMs).The(B_(4)C+Al_(2)O_(3))/Al composite,which incorporates in-situ amorphous Al_(2)O_(3)(am-Al_(2)O_(3))formed on fine aluminum powder as a reinforcing phase,can serve as an integrated structural and functional NAM for dry storage applications.Welding is crucial in the fabrication of these casks.In this study,friction stir welding was performed on(B_(4)C+Al_(2)O_(3))/Al composite sheets at a welding speed of 50 mm/min and rotation rates ranging from 500 to 1000 r/min.The microstructure of the weld joints was analyzed,and the intrinsic relationship between fracture behavior and microstructure was elucidated.Results showed that defect-free joints were achieved at rotation rates of 500 and 750 r/min,while tunnel defects were observed at 1000 r/min.The ultimate tensile strength of the joint welded at 500 r/min was 205.7 MPa,with a strength efficiency of 82%.Microstructural analysis revealed that the grains within the nugget zones(NZs)coarsened and the Al_(2)O_(3)network was disrupted due to the welding thermo-mechanical effect,resulting in softening within the NZs.Fracture locations for all three joints were consistently observed at the NZ boundary on the advancing side(AS).Finite element simulations confirmed that cracks propagated along the NZ boundary on the AS,where stress concentration occurred during tensile testing.展开更多
The flow stress behavior and microstructure development of Al-5Zn-2Mg （7005） aluminum alloy were studied by hot compression tests at deformation temperatures between 300-500 ＆#176;C and strain rates between 0.05-50...The flow stress behavior and microstructure development of Al-5Zn-2Mg （7005） aluminum alloy were studied by hot compression tests at deformation temperatures between 300-500 ＆#176;C and strain rates between 0.05-50 s-1. The deformed structures of the samples were observed by optical microscopy （OM）, transmission electron microscopy （TEM） and electron backscattering diffraction （EBSD） analysis. The calculated activation energy is 147 kJ/mol, which is very close to the activation energy for lattice self-diffusion in aluminum （142 kJ/mol）. Dynamic recovery is the dominant restoration mechanism during the deformation. At high strain rate of 50 s-1, temperature rise due to deformation heating leads to a significant flow softening. Microstructure observations indicated that the remaining softening after deformation heating correction at high strain rate and the softening observed at high temperature are associated with grain coarsening induced by grain boundary migration during dynamic recovery process.展开更多
The creep properties of nickel-based single crystal superalloy with [001] orientation was investigated at different test conditions. The microstructure evolution of γ′ phase, TCP phase and dislocation characteristic...The creep properties of nickel-based single crystal superalloy with [001] orientation was investigated at different test conditions. The microstructure evolution of γ′ phase, TCP phase and dislocation characteristic after creep rupture was studied by SEM and TEM. The results show that the alloy has excellent creep properties. Two different types of creep behavior can be shown in the creep curves. The primary creep is characterized by the high amplitude at test conditions of (760 °C, 600 MPa) and (850 °C, 550 MPa) and the primary creep strain is limited at (980 °C, 250 MPa), (1100 °C, 140 MPa) and (1120 °C, 120 MPa). A little change ofγ′precipitate morphology occurs at (760 °C, 600 MPa). The lateral merging of the γ′ precipitate has already begun at (850 °C, 550 MPa). Theγphase is surrounded by theγ′phase at (980 °C, 250 MPa). Theγphase is no longer continuous tested at (1070 °C, 140 MPa). At (1100 °C, 120 MPa), the thickness ofγphase continues to increase. No TCP phase precipitates in the specimens at (760 °C, 600 MPa), (850 °C, 550 MPa) and (980 °C, 250 MPa). Needle shaped TCP phase precipitates in the specimens tested at (1070 °C, 140 MPa) and (1100 °C, 120 MPa). The dislocation shear mechanism including stacking fault formation is operative at lower temperature and high stress. The dislocation by-passing mechanism occurs to form networks atγ/γ′interface under the condition of high temperature and lower stress.展开更多
A series of Co-Sn alloys with Sn content ranging from 12% to 32%（mole fraction） were undercooled to different degrees below the equilibrium liquidus temperature and the solidification behaviors were investigated by ...A series of Co-Sn alloys with Sn content ranging from 12% to 32%（mole fraction） were undercooled to different degrees below the equilibrium liquidus temperature and the solidification behaviors were investigated by monitoring the temperature recalescence and examing the solidification microstructures.A boundary clearly exists,which separates the coupled growth zone from the decoupled growth zone of eutectic phases for the alloys with Sn content ranging from 14% to 31%（mole fraction）.The other Co-Sn alloys out of this content range are hard to be undercooled into the coupled growth zone in the experiment.It is found that the so-called non-reciprocal nucleation phenomenon does not happen in the solidification of undercooled Co-Sn off-eutectic alloys.展开更多
The effects of the solid solution conditions on the microstructure and tensile properties of Al?Zn?Mg?Cu aluminum alloy were investigated by in-situ resistivity measurement, optical microscopy (OM), scanning electron ...The effects of the solid solution conditions on the microstructure and tensile properties of Al?Zn?Mg?Cu aluminum alloy were investigated by in-situ resistivity measurement, optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and tensile test. A radial basis function artificial neural network (RBF-ANN) model was developed for the analysis and prediction of the electrical resistivity of the tested alloy during the solid solution process. The results show that the model is capable of predicting the electrical resistivity with remarkable success. The correlation coefficient between the predicted results and experimental data is 0.9958 and the relative error is 0.33%. The predicted data were adopted to construct a novel physical picture which was defined as “solution resistivity map”. As revealed by the map, the optimum domain for the solid solution of the tested alloy is in the temperature range of 465?475 °C and solution time range of 50?60 min. In this domain, the solution of second particles and the recrystallization phenomenon will reach equilibrium.展开更多
基金supported by the National Key R&D Plan of China(No.2022YFB3705603)the National Natural Science Foundation of China(No.52101046)+1 种基金the Excellent Youth Overseas Project of National Science and Natural Foundation of China,the Baowu Special Metallurgy Cooperation Limited(No.22H010101336)the Medicine-Engineering Interdisciplinary Project of Shanghai Jiao Tong University(No.YG2022QN076).
文摘Titanium(Ti)and its alloys are frequently utilized as critical components in a variety of engineering ap-plications because of their high specific strength and excellent corrosion resistance.Compared to conven-tional surface strengthening technologies,laser shock peening(LSP)has increasingly attracted attention from researchers and industries,since it significantly improves the surface strength,biocompatibility,fa-tigue resistance,and anti-corrosion ability of Ti and its alloys.Despite numerous studies that have been carried out to elucidate the effects of LSP on microstructural evolution and mechanical properties of Ti and its alloys in recent years,a comprehensive review of recent advancements in the field of Ti and its alloys subjected to LSP is still lacking.In this review,the standard LSP and the novel process designs of LSP assisted by thermal,cryogenic,electropulsing and magnetic fields are discussed and compared.Microstructural evolution,with focuses on the dislocation dynamics,deformation twinning,grain refine-ment and surface amorphization,during LSP processing of Ti alloys is reviewed.Furthermore,the en-hanced engineering performance of the L SP-processed(L SPed)Ti alloys,including surface hardness,wear resistance,fatigue life and corrosion resistance are summarized.Finally,this review concludes by present-ing an overview of the current challenges encountered in this field and offering insights into anticipated future trends.
基金supported by the National Key R&D Program of China(No.2021YFB3700403).
文摘The hot deformation behavior of the premium GH4738 alloy was investigated in the temperature range of 1313 to 1353 K at strain rates of 0.01 to 1 s^(−1)using the hot compression test.To accurately predict flow stress,three novel strain compensation constitutive equations were developed and rigorously assessed.The results indicate that the power function model(correlation coefficients r=0.98544)demonstrates greater prediction accuracy compared to other functions,with a calculated average activation energy of 507.968 kJ mol−1.Additionally,electron backscattered diffraction technology and transmission electron microscopy were used to analyze the evolution of the alloy microstructure during dynamic recrystallization under different deformation conditions.The results show that under high-temperature and large deformation conditions,the dislocation density and the degree of grain rotation increase,which promotes the formation and growth of new recrystallized grains,so that recrystallization is completed when the deformation amount reaches 30%.Besides,the increase in the temperature not only enhances the thermal activation mechanism,but also improves the grain size uniformity and texture consistency.Meanwhile,the carbide inhibits grain overgrowth by pinning grain boundaries,maintaining a fine and uniform grain structure of the alloy,and thereby improving the plasticity of the material.
基金supported by the National Natural Science Foundation of China(52005264).
文摘Solution and aging treatment were conducted on the laser directed energy deposition(LDED)-prepared carbon nanotubes(CNTs)-reinforced WE43(CNTs/WE43)layers to optimize their microstructure and surface properties in this study.The microstructure of the WE43 and CNTs/WE43 layers was systematically compared.The dissolution of divorced eutectics at the grain boundaries was retarded by CNTs during solution treatment.The spot segregation composed of Mg_(24)Y_(5),CNTs,and Zr cores in the solution treated CNTs/WE43 layer presented a slight decreasing in Y content.The grain growth of both types of layers underwent three stages:slow,rapid,and steady-state.The significant inhibitory effect of CNTs on the grain growth of the LDED WE43 matrix was more pronounced than the promoting effect of temperature,resulting in a 47%increase at 510℃ and a 35%increase at 540℃ in the grain growth exponent compared to the WE43 layers at 510℃.During the subsequent aging treatment at 225℃,the precipitation sequences from plate-shaped β″to plate-shaped and globular β′ were observed in both types of layers.CNTs can facilitate an increase in the nucleation rate of precipitates,but without accelerating precipitation hardening rate.The long and short diameters of the precipitates in peak-aged state were decreased by 48.5%and 43.1%by addition of CNTs,respectively.The wear resistance of both the WE43 and CNTs/WE43 layers can be significantly enhanced through solution and aging treatment.The enhancement in wear resistance for the CNTs/WE43 layers is considerably greater than that of the WE43 layers.
基金Guizhou Province Science and Technology Plan Project(QKHJC-ZK[2024]yiban604)Guizhou Province Science and Technology Plan Project(CXTD[2021]008)+4 种基金Bijie City Science and Technology Project(BKLH[2023]9)Technology Project of Bijie City(BKLH[2023]36)Natural Science Research Project of Guizhou Higher Education Institutions of China(QJJ[2023]047)Science and Technology Project of Guizhou Department of Transportation(2022-121-011)Sanmenxia City Science and Technology Bureau Science and Technology Research Project(2022002005)。
文摘The microstructure evolution and deformation mechanism of a DZ125 superalloy during high-temperature creep were studied by means of microstructure observation and creep-property tests.The results show that at the initial stage of high-temperature creep,two sets of dislocations with different Burgers vectors move and meet inγmatrix channels,and react to form a quadrilateral dislocation network.Andγ′phases with raft-like microstructure are generated after the formation of dislocation networks.As creep progresses,the quadrilateral dislocation network is gradually transformed into hexagonal and quadrilateral dislocation networks.During steady stage of creep,the superalloy undergoes deformation with the mechanism that a great number of dislocations slip and climb in the matrix across the raft-likeγ′phases.At the later stage of creep,the raft-likeγ′phases are sheared by dislocations at the breakage of dislocation networks,and then alternate slip occurs,which distorts and breaks the raft-likeγ′/γphases,resulting in the accumulation of micropores at the raft-likeγ′/γinterfaces and the formation of microcracks.As creep continues,the microcracks continue to expand until creep fracture occurs,which is the damage and fracture mechanism of the alloy at the later stage of creep at high temperature.
基金National Key R&D Program of China(2022YFB3706901)National Natural Science Foundation of China(52274382)Key Research and Development Program of Hubei Province(2022BAA024)。
文摘The hot deformation behavior of as-extruded Ti-6554 alloy was investigated through isothermal compression at 700–950°C and 0.001–1 s^(−1).The temperature rise under different deformation conditions was calculated,and the curve was corrected.The strain compensation constitutive model of as-extruded Ti-6554 alloy based on temperature rise correction was established.The microstructure evolution under different conditions was analyzed,and the dynamic recrystallization(DRX)mechanism was revealed.The results show that the flow stress decreases with the increase in strain rate and the decrease in deformation temperature.The deformation temperature rise gradually increases with the increase in strain rate and the decrease in deformation temperature.At 700°C/1 s^(−1),the temperature rise reaches 100°C.The corrected curve value is higher than the measured value,and the strain compensation constitutive model has high prediction accuracy.The precipitation of theαphase occurs during deformation in the twophase region,which promotes DRX process of theβphase.At low strain rate,the volume fraction of dynamic recrystallization increases with the increase in deformation temperature.DRX mechanism includes continuous DRX and discontinuous DRX.
基金Shenzhen Science and Technology Program(KJZD20230923113900001)Project of Industry and Information Technology Bureau of Shenzhen Municipality(201806071403422960)。
文摘The hot compression curves and deformed microstructures were investigated under various hot deformation conditions in three states:hot isostatic pressing(HIP,A1),HIP+hot extrusion at 1100℃(A2),and HIP+hot extrusion at 1150℃(A3).The results show that A2 sample,extruded at 1100℃ with uniform γ+γ′duplex microstructures,demonstrates excellent hot deformation behavior at both 1050 and 1100℃.The true stress-true strain curves of A2 sample maintain a hardening-softening equilibrium over a larger strain range,with post-deformation average grain size of 5μm.The as-HIPed A1 sample and 1150℃ extruded A3 sample exhibit a softening region in deformation curves at 1050℃,and the grain microstructures reflect an incomplete recrystallized state,i.e.combination of fine recrystallized grains and initial larger grains,characterized by a necklace-like microstructure.The predominant recrystallization mechanism for these samples is strain-induced boundary migration.At 1150℃ with a strain rate of 0.001 s^(-1),the influence of the initial microstructure on hot deformation behavior and resultant microstructure is relatively less pronounced,and postdeformation microstructures are fully recrystallized grains.Fine-grained microstructures are conducive to maximizing the hot deformation potential of alloy.By judiciously adjusting deformation regimes,a fine and uniform deformed microstructure can be obtained.
基金supported by the National Natural Science Foundation of China(No.52261007)the Science and Technology Project of Guangxi,China(No.GKAD22035039)the Opening Fund for Key Laboratory of New Processing Technology for Nonferrous Metal&Materials,Ministry of Education,Guilin University of Technology,China(Nos.22KF-11,22KF-14).
文摘The microstructure evolution and strengthening ability of natural aging(NA),delayed aging(DA),and DA after pre-aging(PDA)of Al-Mg-Si alloy were studied.Results show that small and unstable atomic clusters are generated during NA,leading to the formation of low-density coarseβʺandβ′phases,thus reducing the strength of DA alloy.However,atomic clusters and GP zones with larger sizes and high Mg/Si molar ratio form during pre-aging treatment.They prevent the generation of clusters during NA and can serve as effective nucleation sites in subsequent artificial aging,which elevates the number density of fineβʺprecipitates and improves the alloy strength.After pre-aging at 175°C,the strengthening capacity of PDA alloy is restored,with hardness and yield strength reaching 95.1%and 101.9%of peak-aged alloy.
文摘Magnesium is distinguished by its highly anisotropic inelastic deformation involving a profuse activity of deformation twinning.Instrumented micro/nano-indentation technique has been widely applied to characterize the mechanical properties of magnesium,typically through the analysis of the indentation load-depth response,surface topography,and less commonly,the post-mortem microstructure within the bulk material.However,experimental limitations prevent the real-time observation of the evolving microstructure.To bridge this gap,we employ a recently-developed finite-strain model that couples the phase-field method and conventional crystal plasticity to simulate the evolution of the indentation-induced twin microstructure and its interaction with plastic slip in a magnesium single-crystal.Particular emphasis is placed on two aspects:orientation-dependent inelastic deformation and indentation size effects.Several outcomes of our 2D computational study are consistent with prior experimental observations.Chief among them is the intricate morphology of twin microstructure obtained at large spatial scales,which,to our knowledge,represents a level of detail that has not been captured in previous modeling studies.To further elucidate on size effects,we extend the model by incorporating gradient-enhanced crystal plasticity,and re-examine the notion of‘smaller is stronger’.The corresponding results underscore the dominant influence of gradient plasticity over the interfacial energy of twin boundaries in governing the size-dependent mechanical response.
基金supported by the National Natural Science Foundation of China(Nos.U2030206,12104022,52271014 and 22075003)the Presidential Foundation of CAEP(No.YZJJZL2023173)Sichuan Science and Technology Program(No.2021YFH0092).
文摘Li/MnO_(2) primary batteries are widely used in industry for their high specific capacity and safety.However,a deep comprehension of the Li^(+)insertion mechanism and the high self-discharge rate of the batteries is still needed.Here,the storage mechanism of Li^(+)in the tunnel structure of MnO_(2) as well as the dissolution and migration of Mn-ions were investigated based on multi-scale approaches.The Li/Mn ratio(at%)is determined at about 0.82 when the discharge voltage decreases to 2 V.The limited Li-ions transport rate in the bulk MnO_(2) restrains the reduction reaction,resulting in a low practical specific capacity.Moreover,utilizing spherical aberration-corrected transmission electron microscopy(TEM)coupled with electron energy loss spectroscopy(EELS),the presence of a mixed valence state layer of Mn^(2+)/Mn^(3+)/Mn^(4+)on the surface of the original 20 nm MnO_(2) particles was identified,which could contribute to the initial dissolution of Mn-ions.The battery separator exhibited channels for Mn-ions migration and diffusion and aggregated Mn particles.We put forward the discharge and degradation route in the ways of Mn-ions trajectories,and our findings provide a deep understanding of the high self-discharge rates and the capacity decay of Li-Mn primary batteries.
基金supported by the National Natural Science Foundation of China(Nos.U2037601,U2241231,and 51821001)。
文摘The corrosion behavior of the tungsten inert gas(TIG)welded Mg-3Nd-3Gd-0.2Zn-0.5Zr alloy with different post-weld heat treatments was systematically investigated.The results show that the corrosion resistance of the sand-cast base material(BM)was inferior to that of the fusion zone(FZ),which was attributed to the larger grain size and exacerbated galvanic corrosion caused by coarser Mg_3(Nd,Gd)eutectic phases and numerousβprecipitates.It is found that post-weld solid-solution(T4)treatment could significantly enhance the corrosion resistance of the joint due to the dissolution of the cathodic second phases and the denser protective film abundant in RE oxides generated in corrosive solution.The precipitation of nanosized phases and Zn-Zr clusters would slightly increase the susceptibility to localized corrosion of the peak-aged(T6) joint.As the main corrosion products,MgO and Mg(OH)_(2) are distributed throughout the whole corrosion film,while RE oxides and RE hydroxides are mainly distributed in the inner layer,which can be explained by inward oxidation and replacement reactions between RE elements and MgO/Mg(OH)_(2).Based on the composition and structure of the corrosion product film,a physical model has been proposed for depicting the microstructure evolution associated with the corresponding corrosion behavior of the joints.This work could promote the applications of welded Mg-RE alloy joint in some corrosion environments.
基金the National Key Research and Development Program of China(No.2016YFB0700505)the National Natural Science Foundation of China(No.51571020).
文摘The hot deformation behavior of GH3230 superalloy under selected deformation conditions ranging from 950 to 1150℃with strain rates ranging from 0.01 to 10 s^(–1)was studied through isothermal hot compression experiments.Based on the obtained flow stresses,a strain-compensated Arrhenius-type model was developed for the description of hot deformation behavior,and the consistency of the predicted flow stresses with the experimental values confirms the accuracy of the developed model.Furthermore,the processing maps were constructed and classified into the instability domain,low-dissipation stability domain and high-dissipation stability domain in accordance with the dynamic material model and the instability criterion.Microstructure observations indicated that the instability domain exhibits the adiabatic shear bands formation,and the low-power dissipation domain exhibits partial dynamic recrystallization(DRX),with the temperature increase/strain rate decrease being favorable for the DRX.The high-dissipation stability domain was occupied by uniformly fine equiaxed grains,and was identified as the optimal processing window,which corresponds to the deformation conditions at 1070–1150℃ with strain rates ranging from 0.01 to 0.15 s^(–1).Moreover,various DRX mechanisms are observed to occur during the hot deformation,which include the discontinuous dynamic recrystallization,characterized by nucleation at bulged boundaries,the continuous dynamic recrystallization with subgrain progressive rotation and the particle stimulated nucleation mechanism with stimulated nucleation of carbide particles.
基金supported by the National Key Research and Development Program(No.2022YFB4602502)the Guangdong Basic and Applied Basic Research Foundation(No.2021A1515011991)+2 种基金the Key Research and Development Program Fund of Hubei Province(No.2022BAA057)the state Key Lab-oratory of Solidification Processing in NPU(No.SKLSP202325)the China Scholarship Council Visiting PhD Program(No.202306410136).
文摘Multimodal ultrasonic vibration(UV)assisted micro-forming has been widely investigated for its advantages of further reducing forming loads and improving forming quality.However,the influence mechanism of different UV modes on microstructure evolution and mechanical properties was still unclear.Mul-timodal UV assisted micro-compression tests on T2 copper with different grains and sample sizes were conducted in this study.The microstructure evolution for different UV modes was observed by EBSD.The results showed that the true stress reduction caused by UV was increased sequentially with tool ultrasonic vibration(TV),mold ultrasonic vibration(MV)and compound ultrasonic vibration(CV).The region of grain deformation was shifted along the direction of UV,and the MV promoted the uniform distribution of deformation stress.The grain refinement,fiber streamline density,grain deformation and rotation degree were further enhanced under CV,due to the synergistic effect of TV and MV.Additionally,a coupled theoretical model considering both acoustic softening effect and size effect was proposed for describing the mechanical properties.And a physical model of dislocation motion in different UV modes was developed for describing the microstructure evolution.The maximum error between the theoretical and experimental results was only 2.39%.This study provides a theoretical basis for the optimization of UV assisted micro-forming process.
基金supported by the National Science and Technology Major Project of China(No.J2019-VI-0004-0117)。
文摘Casting experiments and macro-micro numerical simulations were conducted to examine the microstructure characteristics of K439B nickel-based superalloy casting with varying cross-sections during the gravity investment casting process.Firstly,microstructure analysis was conducted on the casting using scanning electron microscopy(SEM)and electron backscatter diffraction(EBSD).Subsequently,calculation of the phase diagram and differential scanning calorimetry(DSC)tests were conducted to determine the macro-micro simulation parameters of the K439B alloy,and the cellular automaton finite element(CAFE)method was employed to develop macro-micro modeling of K439B nickel-based superalloy casting with varying cross-sections.The experimental results revealed that the ratio of the average grain area increased from the edge to the center of the sections as the ratio of the cross-sectional area increased.The simulation results indicated that the average grain area increased from 0.885 to 0.956 mm^(2)as the ratio of the cross-sections increased from 6꞉1 to 12꞉1.The experiment and simulation results showed that the grain size became more heterogeneous and the grain shape became more irregular with an increase in the ratio of the cross-sectional area of the casting.CAFE modeling was an effective method to simulate the microstructure evolution of the K439B alloy and ensure the accuracy of the simulation.
基金the National Key Research and Development Program of China(No.2018YFE0306103)the National Natural Science Foundation of China(No.52071050)+1 种基金the Science and Technology Innovation Project of Ningbo,China(No.2021Z032)the Program of China Scholarships Council(No.202106060148).
文摘The Cu/1010 steel bimetal laminated composites(BLCs)were rolled to different thicknesses to investigate the effect of rolling direction and reduction on the microstructure evolution and mechanical properties.The difference of mechanical properties between the Cu and 1010 steel causes different thickness reductions,percentage spread,and cladding ratios.The formation of strong texture induces larger strength of the rolled samples,and as the volume fraction of 1010 steel is larger in Route-A,its strength is consistently greater than that in Route-B.The obstruction of interface to crystal and dislocation slip results in the formation of interface distortion,inducing dislocation density gradient when the rolling reduction is low in Route-A.The slip planes of the Cu and 1010 steel are more prone to suffer the normal strain,while the shear strain of other crystal planes is obviously larger than the normal strain under rolling load near the interface.
基金supported by National Natural Science Foundation of China(No.U21A2048)the Science and Technology Research Program of the Chongqing Municipal Education Commission(No.KJZDK202201108)+2 种基金Academician in Chongqing Leaded Guidance Project of Science,Technology Innovation(No.CSTB2023YSZX-JCX0006)the Science and Technology Research Project of Chongqing Municipal Education Commission(No.KJQN202101126)Chongqing Natural Science Foundation(No.CSTB2024NSCQ-MSX0574).
文摘This article reports a systematic investigation on the relationship between the microstructure evolution and mechanical properties of as-cast Mg-9.5Gd-2.3Y-1Zn-0.5Zr(VW92,wt.%)alloy during aging treatment.The results indicate that the alloy exhibits obvious double peak-aging characteristics at 180℃,200℃,and 220℃;the first peak-aging appeared at 96 h,48 h,and 48 h,respectively,while the second peak-aging occurred at 204 h,180 h,and 180 h,respectively.Moreover,the strengths of the first peak-aging were higher than those of the second peak-aging.Consequently,the first peak-aging at 200℃ achieved the best mechanical properties,with ultimate tensile strength(UTS),yield strength(YS),and elongation(EL)of 380(±2.0)MPa,255(±1.8)MPa,and 12.8(±1.7)%,respectively.While the strength decreased in the second peak-aging,the elongation increased to 17.2(±0.5)%.The first peak-aging strengthening is ascribed to the participation of the nano-β' phases in the matrix and the long period stacking ordered(LPSO)phases at grain boundaries(GBs).Additionally,the second peak-aging strengthening is associated with the emergence of a relatively new 3D structure comprising longchain-like structural phases β'+β'_(F) tβ_(1),γ' phases,and LPSO phases within the grain,combined with the fine and uniform LPSO phases at the GBs.
基金support of the National Natural Science Foundation of China(Grant Nos.52171056 and 52203385)the Joint Funds of the National Natural Science Foundation of China(Grant Nos.U2341255 and U22A20114)+1 种基金the Young Elite Scientists Sponsorship Program by CAST(Grant No.YESS20220225)the IMR Innovation Fund(Grant No.2021-ZD02).
文摘In dry storage,spent fuel is typically stored in casks constructed from neutron absorbing materials(NAMs).The(B_(4)C+Al_(2)O_(3))/Al composite,which incorporates in-situ amorphous Al_(2)O_(3)(am-Al_(2)O_(3))formed on fine aluminum powder as a reinforcing phase,can serve as an integrated structural and functional NAM for dry storage applications.Welding is crucial in the fabrication of these casks.In this study,friction stir welding was performed on(B_(4)C+Al_(2)O_(3))/Al composite sheets at a welding speed of 50 mm/min and rotation rates ranging from 500 to 1000 r/min.The microstructure of the weld joints was analyzed,and the intrinsic relationship between fracture behavior and microstructure was elucidated.Results showed that defect-free joints were achieved at rotation rates of 500 and 750 r/min,while tunnel defects were observed at 1000 r/min.The ultimate tensile strength of the joint welded at 500 r/min was 205.7 MPa,with a strength efficiency of 82%.Microstructural analysis revealed that the grains within the nugget zones(NZs)coarsened and the Al_(2)O_(3)network was disrupted due to the welding thermo-mechanical effect,resulting in softening within the NZs.Fracture locations for all three joints were consistently observed at the NZ boundary on the advancing side(AS).Finite element simulations confirmed that cracks propagated along the NZ boundary on the AS,where stress concentration occurred during tensile testing.
基金Project(51075132)supported by the National Natural Science Foundation of ChinaProject(20090161110027)supported by the Doctoral Fund of Ministry of Education of ChinaProject(2011BAG03B02)supported by National Key Technology R&D Program during the 12th Five-Year Plan Period,China
文摘The flow stress behavior and microstructure development of Al-5Zn-2Mg （7005） aluminum alloy were studied by hot compression tests at deformation temperatures between 300-500 ＆#176;C and strain rates between 0.05-50 s-1. The deformed structures of the samples were observed by optical microscopy （OM）, transmission electron microscopy （TEM） and electron backscattering diffraction （EBSD） analysis. The calculated activation energy is 147 kJ/mol, which is very close to the activation energy for lattice self-diffusion in aluminum （142 kJ/mol）. Dynamic recovery is the dominant restoration mechanism during the deformation. At high strain rate of 50 s-1, temperature rise due to deformation heating leads to a significant flow softening. Microstructure observations indicated that the remaining softening after deformation heating correction at high strain rate and the softening observed at high temperature are associated with grain coarsening induced by grain boundary migration during dynamic recovery process.
文摘The creep properties of nickel-based single crystal superalloy with [001] orientation was investigated at different test conditions. The microstructure evolution of γ′ phase, TCP phase and dislocation characteristic after creep rupture was studied by SEM and TEM. The results show that the alloy has excellent creep properties. Two different types of creep behavior can be shown in the creep curves. The primary creep is characterized by the high amplitude at test conditions of (760 °C, 600 MPa) and (850 °C, 550 MPa) and the primary creep strain is limited at (980 °C, 250 MPa), (1100 °C, 140 MPa) and (1120 °C, 120 MPa). A little change ofγ′precipitate morphology occurs at (760 °C, 600 MPa). The lateral merging of the γ′ precipitate has already begun at (850 °C, 550 MPa). Theγphase is surrounded by theγ′phase at (980 °C, 250 MPa). Theγphase is no longer continuous tested at (1070 °C, 140 MPa). At (1100 °C, 120 MPa), the thickness ofγphase continues to increase. No TCP phase precipitates in the specimens at (760 °C, 600 MPa), (850 °C, 550 MPa) and (980 °C, 250 MPa). Needle shaped TCP phase precipitates in the specimens tested at (1070 °C, 140 MPa) and (1100 °C, 120 MPa). The dislocation shear mechanism including stacking fault formation is operative at lower temperature and high stress. The dislocation by-passing mechanism occurs to form networks atγ/γ′interface under the condition of high temperature and lower stress.
基金Project(50874073) supported by the National Natural Science Foundation of ChinaProject(2011CB610405) supported by the National Basic Research Program of ChinaProject(2011M500074) supported by China Postdoctoral Science Foundation
文摘A series of Co-Sn alloys with Sn content ranging from 12% to 32%（mole fraction） were undercooled to different degrees below the equilibrium liquidus temperature and the solidification behaviors were investigated by monitoring the temperature recalescence and examing the solidification microstructures.A boundary clearly exists,which separates the coupled growth zone from the decoupled growth zone of eutectic phases for the alloys with Sn content ranging from 14% to 31%（mole fraction）.The other Co-Sn alloys out of this content range are hard to be undercooled into the coupled growth zone in the experiment.It is found that the so-called non-reciprocal nucleation phenomenon does not happen in the solidification of undercooled Co-Sn off-eutectic alloys.
基金Project(51344004)supported by the National Natural Science Foundation of China
文摘The effects of the solid solution conditions on the microstructure and tensile properties of Al?Zn?Mg?Cu aluminum alloy were investigated by in-situ resistivity measurement, optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and tensile test. A radial basis function artificial neural network (RBF-ANN) model was developed for the analysis and prediction of the electrical resistivity of the tested alloy during the solid solution process. The results show that the model is capable of predicting the electrical resistivity with remarkable success. The correlation coefficient between the predicted results and experimental data is 0.9958 and the relative error is 0.33%. The predicted data were adopted to construct a novel physical picture which was defined as “solution resistivity map”. As revealed by the map, the optimum domain for the solid solution of the tested alloy is in the temperature range of 465?475 °C and solution time range of 50?60 min. In this domain, the solution of second particles and the recrystallization phenomenon will reach equilibrium.
