Sustainable development is an important component of the Belt and Road Initiative(BRI)and is of great significance for evaluating the levels of sustainable development of countries along this route(henceforth,BRI coun...Sustainable development is an important component of the Belt and Road Initiative(BRI)and is of great significance for evaluating the levels of sustainable development of countries along this route(henceforth,BRI countries).Therefore,this study aims to identify the factors that influence the levels of sustainable development of BRI countries in a reasonable and objective manner.Eventually,this study employs the super efficiency slacks-based measure(Super-SBM)model,which considers unexpected outputs to measure the level of sustainable development of BRI countries.The dynamic change and composition of the sustainable development level of these countries are calculated using the global Malmquist-Luenberger index.Furthermore,the Tobit model is used to identify the factors influencing the level of sustainable development of BRI countries in general and in various categories.The empirical results suggest the following points.(a)The overall level of sustainable development of BRI countries is low,whereas those of high-income and middle-and high-income countries are relatively high.(b)The overall sustainable development levels of BRI countries declined to a certain extent in 2008 owing to the effect of the financial crisis,.However,the sustainable development level of other countries,barring low-income countries,has gradually increased since 2011.(c)Since 2008,technological progress has replaced technical efficiency as the main driving force behind the improvement of the sustainable development level of BRI countries.(d)A U-shaped relationship is observed between the economic and sustainable development levels of these countries.(e)The level of science and technology and the proportion of renewable energy consumption can promote the sustainable development of these countries.Moreover,a negative correlation exists between the level of opening to the outside world and that of sustainable development of countries that mainly export resource-based products and are dominated by labor-intensive export industries.Barring low-income countries,the energy structure plays an effective role in improving the level of sustainable development.Finally,the study presents suggestions for China in the process of coping with the sustainable development of relevant countries during its promotion of the BRI.展开更多
The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable...The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable calibration parameters. To compensate for the deficiency of one measurement model, the multiple measurement models are built by the Denavit-Hartenberg＇s notation, the homemade standard rod components are used as a calibration tool and the Levenberg-Marquardt calibration algorithm is applied to solve the structural parameters in the measurement models. During the tests of multiple measurement models, the sample areas are selected in two situations. It is found that the measurement errors＇ sigma value（0.083 4 ram） dealt with one measurement model is nearly two times larger than that of the multiple measurement models（0.043 1 ram） in the same sample area. While in the different sample area, the measurement errors＇ sigma value（0.054 0 ram） dealt with the multiple measurement models is about 40% of one measurement model（0.137 3 mm）. The preliminary results suggest that the measurement accuracy of AACMM dealt with multiple measurement models is superior to the accuracy of the existing machine with one measurement model. This paper proposes the multiple measurement models to improve the measurement accuracy of AACMM without increasing any hardware cost.展开更多
Based on optimized forecast method of unascertained classifying,a unascer- tained measurement classifying model (UMC) to predict mining induced goaf collapse was established,The discriminated factors of the model are ...Based on optimized forecast method of unascertained classifying,a unascer- tained measurement classifying model (UMC) to predict mining induced goaf collapse was established,The discriminated factors of the model are influential factors including over- burden layer type,overburden layer thickness,the complex degree of geologic structure, the inclination angle of coal bed,volume rate of the cavity region,the vertical goaf depth from the surface and space superposition layer of the goaf region.Unascertained mea- surement (UM) function of each factor was calculated.The unascertained measurement to indicate the classification center and the grade of waiting forecast sample was determined by the UM distance between the synthesis index of waiting forecast samples and index of every classification.The training samples were tested by the established model,and the correct rate is 100%.Furthermore,the seven waiting forecast samples were predicted by the UMC model.The results show that the forecast results are fully consistent with the ac- tual situation.展开更多
Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ri...Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.展开更多
As a key factor of economic growth, productivity has been valued in the academic community. Today, with the rapid development of service industry, the research for service productivity has also attracted wide attentio...As a key factor of economic growth, productivity has been valued in the academic community. Today, with the rapid development of service industry, the research for service productivity has also attracted wide attention. However, in the service industry, because of its own characteristics and properties, measurement of service productivity could not apply for the traditional productivity measurement methods simply. This research first has put out the constitution model of service productivity, and thus put out the measurement model of service productivity. And explains that service productivity is a function which contains internal efficiency, external efficiency, and capacity efficiency. In service productivity, external efficiency is the key one, internal efficie and capacity efficiency should also be given considerations. Eventually, the strategy of implementing measurement of service productivity have been proposed ncy the展开更多
Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC...Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.展开更多
While cellular networks have continuously evolved in re- cent years, the industry has clearly seen unprecedented chal- lenges to meet the exponentially growing expectations in the near future. The 5G system is facing ...While cellular networks have continuously evolved in re- cent years, the industry has clearly seen unprecedented chal- lenges to meet the exponentially growing expectations in the near future. The 5G system is facing grand challenges such as the ever-increasing traffic volumes and remarkably diver- sified services connecting humans and machines alike. As a result, the future network has to deliver massively increased capacity, greater flexibility, incorporated computing capabili- ty, support of significantly extended battery lifetime, and ac- commodation of varying payloads with fast setup and low latency, etc. In particular, as 5G requires more spectrum resource, higher frequency bands are desirable. Nowadays, millimeter wave has been widely accepted as one of the main communication bands for 5G.展开更多
While cellular networks have continuously evolved in recent years, the industry has clearly seen unprecedented challenges to meet the exponentially growing expectations in the near future.
Integrated continuous stirred-tank reactors and distillation columns with recycle(CSTR-DC-recycle)are essential components in chemical processes.This paper proposes a method to establish a normal operating zone(NOZ)mo...Integrated continuous stirred-tank reactors and distillation columns with recycle(CSTR-DC-recycle)are essential components in chemical processes.This paper proposes a method to establish a normal operating zone(NOZ)model to represent allowable variations of the CSTR-DC-recycle chemical processes.The NOZ is a geometric space containing all safe operating points of the CSTR-DC-recycle chemical processes,so that it is an effective model for process monitoring.The novelty of the proposed method is to establish the NOZ model based on boundary points.The boundary points make it possible to capture the actual geometric space irrespective of the space shape.In contrast,existing methods represent the NOZ of processes by fixed mathematical models such as ellipsoidal and convex-hull models;they are not suitable for the CSTR-DC-recycle chemical processes whose NOZs cannot be exactly defined by fixed mathematical structures.Simulated case studies based on Aspen Hysys software are given to illustrate the proposed method.展开更多
Urbanization development quality(UDQ) of urban agglomeration(UA) is one of the important indexes to evaluate if the UA urbanization speed is reasonable,if the population urbanization process is sound,if the economic u...Urbanization development quality(UDQ) of urban agglomeration(UA) is one of the important indexes to evaluate if the UA urbanization speed is reasonable,if the population urbanization process is sound,if the economic urbanization process is efficient,if the social urbanization process is harmonious and fair,which is generally composed of three parts,including economic urbanization development quality,social urbanization development quality and spa-tial urbanization security quality.With the research of evolution rules of UDQ,through the analysis on the interactive coordination relation between UDQ and urbanization level,the paper proposes three dimensional index ball and stan-dard value of comprehensive measures of UDQ,which is composed of three categories of indexes.By introducing At-kinson model,this paper constructs the sub-element measure model and segmental measure model of UDQ,and fur-ther makes an overall evaluation on the characteristic of UDQ of UAs in China.Results show that:1) UDQ of UAs lied at optimization and upgrading phase during 1995-2008 and the quality was low.Population urbanization level did not reflect the UDQ of UAs;2) the improving speed of the spatial urbanization security quality was higher than the so-cial urbanization development quality,and the improving speed of economic urbanization development quality was the lowest;3) the coordination between UDQ and urbanization level was not so good;4) there was a weak correlation re-lation between UDQ and UA scale,and it was not true that the bigger the UA was,the better the UDQ was.展开更多
Due to the complex features of rock mass blastability assessment systems, an evaluation model of rock mass blastability was established on the basis of the unascertained measurement （UM） theory and the actual charac...Due to the complex features of rock mass blastability assessment systems, an evaluation model of rock mass blastability was established on the basis of the unascertained measurement （UM） theory and the actual characteristics of the project. Considering a comprehensive range of intact rock properties and discontinuous structures of rock mass, twelve main factors influencing the evaluation blastability of rock mass were taken into account in the UM model, and the blastability evaluation index system of rock mass was constructed. The unascertained evaluation indices corresponding to the selected factors for the actual situation were solved both qualitatively and quantitatively. Then, the UM function of each evaluation index was obtained based on the initial data for the analysis of the blastability of six rock mass at a highway improvement cutting site in North Wales. The index weights of the factors were calculated by entropy theory, and credible degree identification （CDI） criteria were established according to the UM theory. The results of rock mass blastability evaluation were obtained by the CDI criteria. The results show that the UM model assessment results agree well with the actual records, and are consistent with those of the fuzzy sets evaluation method. Meanwhile, the unascertained superiority degree of rock mass blastability of samples S1-$6 which can be calculated by scoring criteria are 3.428 5, 3.453 3, 4.058 7, 3.675 9, 3.516 7 and 3.289 7, respectively. Furthermore, the proposed method can take into account large amount of uncertain information in blastability evaluation, which can provide an effective, credible and feasible way for estimating the blastability of rock mass. Engineering practices show that it can complete the blastability assessment systematically and scientifically without any assumption by the proposed model, which can be applied to practical engineering.展开更多
According to the principle, “The failure data is the basis of software reliability analysis”, we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out...According to the principle, “The failure data is the basis of software reliability analysis”, we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out the conclusion from the fitting results of failure data of a software project, the SRES can recommend users “the most suitable model” as a software reliability measurement model. We believe that the SRES can overcome the inconsistency in applications of software reliability models well. We report investigation results of singularity and parameter estimation methods of experimental models in SRES.展开更多
Study of the thermodynamic behaviour of CaCl2-H2O-CO2 systems is important in different scientific areas in the chemical and petroleum engineering fields. For example, a system including salt- H20-CO2 is a common syst...Study of the thermodynamic behaviour of CaCl2-H2O-CO2 systems is important in different scientific areas in the chemical and petroleum engineering fields. For example, a system including salt- H20-CO2 is a common system in CO2 geological storage. During carbonate matrix acidizing, this mixture also appears as the spent acid. Hence, study of the behaviour of this system and the solubility of CO2 in CaCl2 brine in different thermodynamic conditions is critical. In this study, CO2 solubility in 0, 1.90 and 4.80 mol/L CaCl2 solutions at 328.15 to 375.15 K and 68.9 to 206.8 bar were measured. These values are normal for oil reservoirs. A popular thermodynamic model is available in the literature for estimating the CO2 solubility in pure water and NaC1 solutions. In this paper, the available model was modified by experimental work to be applicable for CaCl2 as well. Based on the measured data, the component interaction parameters in the base model were adjusted for a CaCl2-H2O-CO2 system. The developed model could predict CO2 solubility in different conditions with remarkable accuracy, particularly for high concentration solutions and at high pressures. This improvement is up to 65% better than in the base model. This model can be used in Darcy scale models for predicting wormhole propagation during carbonate matrix acidizing.展开更多
The accuracy of model attitude measurement has an important impact on wind tunnel test results. Microelectromechanical System Inertial Measurement Unit(MEMS IMU) provides a feasible way to measure model attitudes with...The accuracy of model attitude measurement has an important impact on wind tunnel test results. Microelectromechanical System Inertial Measurement Unit(MEMS IMU) provides a feasible way to measure model attitudes with high accuracy. However, the installation error between MEMS IMU coordinate system and the body coordinate system of test models can make the accuracy of the model attitude measurement decrease. In wind tunnel tests, the installation error depends on the relationship between the IMU and the model mechanism before tests. Therefore, infield calibration in wind tunnel tests is necessary to reduce installation errors. To improve attitude measurement accuracy, the least squares quaternion calibration method based on MEMS IMU and six-position calibration procedure are proposed. High-precision three-axis turntable tests are performed. The pitch accuracy after calibration is higher than that before calibration in the angle of attack sweeping tests. The Root-Mean-Square Errors(RMSE) in the roll and yaw are within0.01°, which are smaller than those before calibration. In the roll sweeping tests, RMSE of three attitude angles decrease significantly. In hypersonic wind tunnel tests, the pitch errors before and after calibration are within 0.05° and 0.02° in the angle of attack sweeping tests without wind. In five angle of attack sweeping tests with wind, the deviation between the mean of the pitch and the pitch after the elastic angle correction is within 0.03° and the standard deviation of five tests is within 0.01°. The proposed method is confirmed to enhance the accuracy of attitude measurement effectively, which is convenient for engineering applications.展开更多
An aerodynamic force and moment measurement was conducted in JF12 long-testduration detonation-driven shock tunnel of Institute of Mechanics,Chinese Academy of Sciences.The test duration of JF12 is 100–130 ms.The nom...An aerodynamic force and moment measurement was conducted in JF12 long-testduration detonation-driven shock tunnel of Institute of Mechanics,Chinese Academy of Sciences.The test duration of JF12 is 100–130 ms.The nominal Mach number is 7.0 and the exit diameter of the contoured nozzle is 2.5 m.The total enthalpy is 2.5 MJ/kg which duplicates the hypersonic flight conditions of Mach number 7.0 at 35 km altitude.The test model is the standard aerodynamic force model of 10° half-angle sharp cone.The length of the test model is 1500 mm and the weight is 57 kg.The aerodynamic forces were measured with a six-component strain balance.The angles of attack were set to be à5°,0°,5°,10° and 14°,respectively.The experimental results show that in the 100–130 ms test duration,the signals of strain balance have 3–4 complete vibration cycles.So,the aerodynamic forces and moments can be obtained directly by averaging the signals of balance without acceleration compensation.The force measurement error of repeatability of JF12 is less than 2%.The aerodynamic force coefficients of JF12 are in good agreement with those of conventional hypersonic wind tunnels.For this test model at Mach number 7.0 and total enthalpy of 2.5 MJ/kg,the real-gas effects on aerodynamic force characteristics are not very evident.展开更多
Laser self-mixing interference（SMI） wave plate measurement method is a burgeoning technique for its simplicity and efficiency. But for the non-coated sample, the reflected light from the surface can seriously affect...Laser self-mixing interference（SMI） wave plate measurement method is a burgeoning technique for its simplicity and efficiency. But for the non-coated sample, the reflected light from the surface can seriously affect the measurement results.To analyze the reason theoretically, a self-consistent model for laser operation with a sub-external and an external cavity is established, and the sub-external cavity formed by the sample and a cavity mirror is proved to be the main error source.A synchronous tuning method is proposed to eliminate the sub-external cavity effect. Experiments are carried out on the synchronously tuning double external cavities self-mixing interference system, and the error of the system is in the range of -0.435°~0.387° compared with the ellipsometer. The research plays an important role in improving the performance and enlarging the application range of the laser self-mixing interference system.展开更多
In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring meth...In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring method was proposed in this study,and the major steps of the monitoring method include:firstly,time-series images of the similarity model in the test were obtained by a camera,and secondly,measuring points marked as artificial targets were automatically tracked and recognized from time-series images.Finally,the real-time plane displacement field was calculated by the fixed magnification between objects and images under the specific conditions.And then the application device of the method was designed and tested.At the same time,a sub-pixel location method and a distortion error model were used to improve the measuring accuracy.The results indicate that this method may record the entire test,especially the detailed non-uniform deformation and sudden deformation.Compared with traditional methods this method has a number of advantages,such as greater measurement accuracy and reliability,less manual intervention,higher automation,strong practical properties,much more measurement information and so on.展开更多
The paper builds up a cost-benefit measuring model of green products in manufacturing industry throughout its full life cycle, which can quantify green products＇ cost and benefit completely and correctly under the ci...The paper builds up a cost-benefit measuring model of green products in manufacturing industry throughout its full life cycle, which can quantify green products＇ cost and benefit completely and correctly under the circumstance of satisfying enterprise, customer, environment and society. It also puts forth an operable method to estimate social benefit by opportunity cost and establishes a profit maximization-programming model. The model can be applied to justify whether some kinds of green products should be developed and produced.展开更多
It is extensively approved that Channel State Information(CSI) plays an important role for synergetic transmission and interference management. However, pilot overhead to obtain CSI with enough precision is a signific...It is extensively approved that Channel State Information(CSI) plays an important role for synergetic transmission and interference management. However, pilot overhead to obtain CSI with enough precision is a significant issue for wireless communication networks with massive antennas and ultra-dense cell. This paper proposes a learning- based channel model, which can estimate, refine, and manage CSI for a synergetic transmission system. It decomposes the channel impulse response into multiple paths, and uses a learning-based algorithm to estimate paths' parameters without notable degradation caused by sparse pilots. Both indoor measurement and outdoor measurement are conducted to verify the feasibility of the proposed channel model preliminarily.展开更多
According to the principle, “The failure data is the basis of software reliabilityanalysis”, we built a software reliability expert system (SRES) by adopting the artificialtechnology. By reasoning out the conclusion...According to the principle, “The failure data is the basis of software reliabilityanalysis”, we built a software reliability expert system (SRES) by adopting the artificialtechnology. By reasoning out the conclusion from the fitting results of failure data of asoftware project, the SRES can recommend users “the most suitable model” as a softwarereliability measurement model. We believe that the SRES can overcome the inconsistency inapplications of software reliability models well. We report investigation results of singularity and parameter estimation methods of models, LVLM and LVQM.展开更多
文摘Sustainable development is an important component of the Belt and Road Initiative(BRI)and is of great significance for evaluating the levels of sustainable development of countries along this route(henceforth,BRI countries).Therefore,this study aims to identify the factors that influence the levels of sustainable development of BRI countries in a reasonable and objective manner.Eventually,this study employs the super efficiency slacks-based measure(Super-SBM)model,which considers unexpected outputs to measure the level of sustainable development of BRI countries.The dynamic change and composition of the sustainable development level of these countries are calculated using the global Malmquist-Luenberger index.Furthermore,the Tobit model is used to identify the factors influencing the level of sustainable development of BRI countries in general and in various categories.The empirical results suggest the following points.(a)The overall level of sustainable development of BRI countries is low,whereas those of high-income and middle-and high-income countries are relatively high.(b)The overall sustainable development levels of BRI countries declined to a certain extent in 2008 owing to the effect of the financial crisis,.However,the sustainable development level of other countries,barring low-income countries,has gradually increased since 2011.(c)Since 2008,technological progress has replaced technical efficiency as the main driving force behind the improvement of the sustainable development level of BRI countries.(d)A U-shaped relationship is observed between the economic and sustainable development levels of these countries.(e)The level of science and technology and the proportion of renewable energy consumption can promote the sustainable development of these countries.Moreover,a negative correlation exists between the level of opening to the outside world and that of sustainable development of countries that mainly export resource-based products and are dominated by labor-intensive export industries.Barring low-income countries,the energy structure plays an effective role in improving the level of sustainable development.Finally,the study presents suggestions for China in the process of coping with the sustainable development of relevant countries during its promotion of the BRI.
基金Supported by National Natural Science Foundation of China(Grant No.51265017)Jiangxi Provincial Science and Technology Planning Project,China(Grant No.GJJ12468)Science and Technology Planning Project of Ji’an City,China(Grant No.20131828)
文摘The existing articulated arm coordinate measuring machines（AACMM） with one measurement model are easy to cause low measurement accuracy because the whole sampling space is much bigger than the result in the unstable calibration parameters. To compensate for the deficiency of one measurement model, the multiple measurement models are built by the Denavit-Hartenberg＇s notation, the homemade standard rod components are used as a calibration tool and the Levenberg-Marquardt calibration algorithm is applied to solve the structural parameters in the measurement models. During the tests of multiple measurement models, the sample areas are selected in two situations. It is found that the measurement errors＇ sigma value（0.083 4 ram） dealt with one measurement model is nearly two times larger than that of the multiple measurement models（0.043 1 ram） in the same sample area. While in the different sample area, the measurement errors＇ sigma value（0.054 0 ram） dealt with the multiple measurement models is about 40% of one measurement model（0.137 3 mm）. The preliminary results suggest that the measurement accuracy of AACMM dealt with multiple measurement models is superior to the accuracy of the existing machine with one measurement model. This paper proposes the multiple measurement models to improve the measurement accuracy of AACMM without increasing any hardware cost.
基金the National Natural Science Foundation of China(50490274)Mittal Innovative and Enterprising Project at Center South University(07MX14)
文摘Based on optimized forecast method of unascertained classifying,a unascer- tained measurement classifying model (UMC) to predict mining induced goaf collapse was established,The discriminated factors of the model are influential factors including over- burden layer type,overburden layer thickness,the complex degree of geologic structure, the inclination angle of coal bed,volume rate of the cavity region,the vertical goaf depth from the surface and space superposition layer of the goaf region.Unascertained mea- surement (UM) function of each factor was calculated.The unascertained measurement to indicate the classification center and the grade of waiting forecast sample was determined by the UM distance between the synthesis index of waiting forecast samples and index of every classification.The training samples were tested by the established model,and the correct rate is 100%.Furthermore,the seven waiting forecast samples were predicted by the UMC model.The results show that the forecast results are fully consistent with the ac- tual situation.
基金Project(51205299)supported by the National Natural Science Foundation of ChinaProject(2015M582643)supported by the China Postdoctoral Science Foundation+2 种基金Project(2014BAA008)supported by the Science and Technology Support Program of Hubei Province,ChinaProject(2014-IV-144)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2012AAA07-01)supported by the Major Science and Technology Achievements Transformation&Industrialization Program of Hubei Province,China
文摘Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.
文摘As a key factor of economic growth, productivity has been valued in the academic community. Today, with the rapid development of service industry, the research for service productivity has also attracted wide attention. However, in the service industry, because of its own characteristics and properties, measurement of service productivity could not apply for the traditional productivity measurement methods simply. This research first has put out the constitution model of service productivity, and thus put out the measurement model of service productivity. And explains that service productivity is a function which contains internal efficiency, external efficiency, and capacity efficiency. In service productivity, external efficiency is the key one, internal efficie and capacity efficiency should also be given considerations. Eventually, the strategy of implementing measurement of service productivity have been proposed ncy the
文摘Method of VSC (Voltage Shorted Compaction)can be used to determine the intrinsic temperature dependence ofconductivity ofpolycrystalline compaction. The experimental conditions and technical key for preparation of VSC device and its physical model as well as its applications in conducting polymers are discussed in detail.
文摘While cellular networks have continuously evolved in re- cent years, the industry has clearly seen unprecedented chal- lenges to meet the exponentially growing expectations in the near future. The 5G system is facing grand challenges such as the ever-increasing traffic volumes and remarkably diver- sified services connecting humans and machines alike. As a result, the future network has to deliver massively increased capacity, greater flexibility, incorporated computing capabili- ty, support of significantly extended battery lifetime, and ac- commodation of varying payloads with fast setup and low latency, etc. In particular, as 5G requires more spectrum resource, higher frequency bands are desirable. Nowadays, millimeter wave has been widely accepted as one of the main communication bands for 5G.
文摘While cellular networks have continuously evolved in recent years, the industry has clearly seen unprecedented challenges to meet the exponentially growing expectations in the near future.
基金partially funded by the National Natural Science Foundation of China(62273215)。
文摘Integrated continuous stirred-tank reactors and distillation columns with recycle(CSTR-DC-recycle)are essential components in chemical processes.This paper proposes a method to establish a normal operating zone(NOZ)model to represent allowable variations of the CSTR-DC-recycle chemical processes.The NOZ is a geometric space containing all safe operating points of the CSTR-DC-recycle chemical processes,so that it is an effective model for process monitoring.The novelty of the proposed method is to establish the NOZ model based on boundary points.The boundary points make it possible to capture the actual geometric space irrespective of the space shape.In contrast,existing methods represent the NOZ of processes by fixed mathematical models such as ellipsoidal and convex-hull models;they are not suitable for the CSTR-DC-recycle chemical processes whose NOZs cannot be exactly defined by fixed mathematical structures.Simulated case studies based on Aspen Hysys software are given to illustrate the proposed method.
基金Under the auspices of National Natural Science Foundation of China (No. 40971101)Key Direction in Knowledge Innovation Programs of Chinese Academy of Sciences (No. KZCX2-YW-321-05)
文摘Urbanization development quality(UDQ) of urban agglomeration(UA) is one of the important indexes to evaluate if the UA urbanization speed is reasonable,if the population urbanization process is sound,if the economic urbanization process is efficient,if the social urbanization process is harmonious and fair,which is generally composed of three parts,including economic urbanization development quality,social urbanization development quality and spa-tial urbanization security quality.With the research of evolution rules of UDQ,through the analysis on the interactive coordination relation between UDQ and urbanization level,the paper proposes three dimensional index ball and stan-dard value of comprehensive measures of UDQ,which is composed of three categories of indexes.By introducing At-kinson model,this paper constructs the sub-element measure model and segmental measure model of UDQ,and fur-ther makes an overall evaluation on the characteristic of UDQ of UAs in China.Results show that:1) UDQ of UAs lied at optimization and upgrading phase during 1995-2008 and the quality was low.Population urbanization level did not reflect the UDQ of UAs;2) the improving speed of the spatial urbanization security quality was higher than the so-cial urbanization development quality,and the improving speed of economic urbanization development quality was the lowest;3) the coordination between UDQ and urbanization level was not so good;4) there was a weak correlation re-lation between UDQ and UA scale,and it was not true that the bigger the UA was,the better the UDQ was.
基金Project(50934006) supported by the National Natural Science Foundation of ChinaProject(2010CB732004) supported by the National Basic Research Program of China+1 种基金Project(2009ssxt230) supported by the Central South University Innovation Fund,ChinaProject(CX2011B119) supported by the Graduated Students’Research and Innovation Fund of Hunan Province,China
文摘Due to the complex features of rock mass blastability assessment systems, an evaluation model of rock mass blastability was established on the basis of the unascertained measurement （UM） theory and the actual characteristics of the project. Considering a comprehensive range of intact rock properties and discontinuous structures of rock mass, twelve main factors influencing the evaluation blastability of rock mass were taken into account in the UM model, and the blastability evaluation index system of rock mass was constructed. The unascertained evaluation indices corresponding to the selected factors for the actual situation were solved both qualitatively and quantitatively. Then, the UM function of each evaluation index was obtained based on the initial data for the analysis of the blastability of six rock mass at a highway improvement cutting site in North Wales. The index weights of the factors were calculated by entropy theory, and credible degree identification （CDI） criteria were established according to the UM theory. The results of rock mass blastability evaluation were obtained by the CDI criteria. The results show that the UM model assessment results agree well with the actual records, and are consistent with those of the fuzzy sets evaluation method. Meanwhile, the unascertained superiority degree of rock mass blastability of samples S1-$6 which can be calculated by scoring criteria are 3.428 5, 3.453 3, 4.058 7, 3.675 9, 3.516 7 and 3.289 7, respectively. Furthermore, the proposed method can take into account large amount of uncertain information in blastability evaluation, which can provide an effective, credible and feasible way for estimating the blastability of rock mass. Engineering practices show that it can complete the blastability assessment systematically and scientifically without any assumption by the proposed model, which can be applied to practical engineering.
基金the National Natural Science Foundation of China
文摘According to the principle, “The failure data is the basis of software reliability analysis”, we built a software reliability expert system (SRES) by adopting the artificial intelligence technology. By reasoning out the conclusion from the fitting results of failure data of a software project, the SRES can recommend users “the most suitable model” as a software reliability measurement model. We believe that the SRES can overcome the inconsistency in applications of software reliability models well. We report investigation results of singularity and parameter estimation methods of experimental models in SRES.
文摘Study of the thermodynamic behaviour of CaCl2-H2O-CO2 systems is important in different scientific areas in the chemical and petroleum engineering fields. For example, a system including salt- H20-CO2 is a common system in CO2 geological storage. During carbonate matrix acidizing, this mixture also appears as the spent acid. Hence, study of the behaviour of this system and the solubility of CO2 in CaCl2 brine in different thermodynamic conditions is critical. In this study, CO2 solubility in 0, 1.90 and 4.80 mol/L CaCl2 solutions at 328.15 to 375.15 K and 68.9 to 206.8 bar were measured. These values are normal for oil reservoirs. A popular thermodynamic model is available in the literature for estimating the CO2 solubility in pure water and NaC1 solutions. In this paper, the available model was modified by experimental work to be applicable for CaCl2 as well. Based on the measured data, the component interaction parameters in the base model were adjusted for a CaCl2-H2O-CO2 system. The developed model could predict CO2 solubility in different conditions with remarkable accuracy, particularly for high concentration solutions and at high pressures. This improvement is up to 65% better than in the base model. This model can be used in Darcy scale models for predicting wormhole propagation during carbonate matrix acidizing.
文摘The accuracy of model attitude measurement has an important impact on wind tunnel test results. Microelectromechanical System Inertial Measurement Unit(MEMS IMU) provides a feasible way to measure model attitudes with high accuracy. However, the installation error between MEMS IMU coordinate system and the body coordinate system of test models can make the accuracy of the model attitude measurement decrease. In wind tunnel tests, the installation error depends on the relationship between the IMU and the model mechanism before tests. Therefore, infield calibration in wind tunnel tests is necessary to reduce installation errors. To improve attitude measurement accuracy, the least squares quaternion calibration method based on MEMS IMU and six-position calibration procedure are proposed. High-precision three-axis turntable tests are performed. The pitch accuracy after calibration is higher than that before calibration in the angle of attack sweeping tests. The Root-Mean-Square Errors(RMSE) in the roll and yaw are within0.01°, which are smaller than those before calibration. In the roll sweeping tests, RMSE of three attitude angles decrease significantly. In hypersonic wind tunnel tests, the pitch errors before and after calibration are within 0.05° and 0.02° in the angle of attack sweeping tests without wind. In five angle of attack sweeping tests with wind, the deviation between the mean of the pitch and the pitch after the elastic angle correction is within 0.03° and the standard deviation of five tests is within 0.01°. The proposed method is confirmed to enhance the accuracy of attitude measurement effectively, which is convenient for engineering applications.
基金supported by the National Natural Science Foundation of China(Nos.11672312,11532014)
文摘An aerodynamic force and moment measurement was conducted in JF12 long-testduration detonation-driven shock tunnel of Institute of Mechanics,Chinese Academy of Sciences.The test duration of JF12 is 100–130 ms.The nominal Mach number is 7.0 and the exit diameter of the contoured nozzle is 2.5 m.The total enthalpy is 2.5 MJ/kg which duplicates the hypersonic flight conditions of Mach number 7.0 at 35 km altitude.The test model is the standard aerodynamic force model of 10° half-angle sharp cone.The length of the test model is 1500 mm and the weight is 57 kg.The aerodynamic forces were measured with a six-component strain balance.The angles of attack were set to be à5°,0°,5°,10° and 14°,respectively.The experimental results show that in the 100–130 ms test duration,the signals of strain balance have 3–4 complete vibration cycles.So,the aerodynamic forces and moments can be obtained directly by averaging the signals of balance without acceleration compensation.The force measurement error of repeatability of JF12 is less than 2%.The aerodynamic force coefficients of JF12 are in good agreement with those of conventional hypersonic wind tunnels.For this test model at Mach number 7.0 and total enthalpy of 2.5 MJ/kg,the real-gas effects on aerodynamic force characteristics are not very evident.
文摘Laser self-mixing interference（SMI） wave plate measurement method is a burgeoning technique for its simplicity and efficiency. But for the non-coated sample, the reflected light from the surface can seriously affect the measurement results.To analyze the reason theoretically, a self-consistent model for laser operation with a sub-external and an external cavity is established, and the sub-external cavity formed by the sample and a cavity mirror is proved to be the main error source.A synchronous tuning method is proposed to eliminate the sub-external cavity effect. Experiments are carried out on the synchronously tuning double external cavities self-mixing interference system, and the error of the system is in the range of -0.435°~0.387° compared with the ellipsometer. The research plays an important role in improving the performance and enlarging the application range of the laser self-mixing interference system.
基金provided by the Program for New Century Excellent Talents in University (No. NCET-06-0477)the Independent Research Project of the State Key Laboratory of Coal Resources and Mine Safety of China University of Mining and Technology (No. SKLCRSM09X01)the Fundamental Research Funds for the Central Universities
文摘In order to compensate for the deficiency of present methods of monitoring plane displacement in similarity model tests,such as inadequate real-time monitoring and more manual intervention,an effective monitoring method was proposed in this study,and the major steps of the monitoring method include:firstly,time-series images of the similarity model in the test were obtained by a camera,and secondly,measuring points marked as artificial targets were automatically tracked and recognized from time-series images.Finally,the real-time plane displacement field was calculated by the fixed magnification between objects and images under the specific conditions.And then the application device of the method was designed and tested.At the same time,a sub-pixel location method and a distortion error model were used to improve the measuring accuracy.The results indicate that this method may record the entire test,especially the detailed non-uniform deformation and sudden deformation.Compared with traditional methods this method has a number of advantages,such as greater measurement accuracy and reliability,less manual intervention,higher automation,strong practical properties,much more measurement information and so on.
基金This paper is supported by National Nature Science Foundation of China （No.70472034）.
文摘The paper builds up a cost-benefit measuring model of green products in manufacturing industry throughout its full life cycle, which can quantify green products＇ cost and benefit completely and correctly under the circumstance of satisfying enterprise, customer, environment and society. It also puts forth an operable method to estimate social benefit by opportunity cost and establishes a profit maximization-programming model. The model can be applied to justify whether some kinds of green products should be developed and produced.
基金supported by National Basic Research Program of China (NO 2012CB316002)China’s 863 Project (NO 2014AA01A703)+2 种基金National Major Projec (NO. 2014ZX03003002-002)Program for New Century Excellent Talents in University (NCET-13-0321)Tsinghua University Initiative Scientific Research Program (2011THZ02-2)
文摘It is extensively approved that Channel State Information(CSI) plays an important role for synergetic transmission and interference management. However, pilot overhead to obtain CSI with enough precision is a significant issue for wireless communication networks with massive antennas and ultra-dense cell. This paper proposes a learning- based channel model, which can estimate, refine, and manage CSI for a synergetic transmission system. It decomposes the channel impulse response into multiple paths, and uses a learning-based algorithm to estimate paths' parameters without notable degradation caused by sparse pilots. Both indoor measurement and outdoor measurement are conducted to verify the feasibility of the proposed channel model preliminarily.
基金Supported by the National Natural Science Foundation of China
文摘According to the principle, “The failure data is the basis of software reliabilityanalysis”, we built a software reliability expert system (SRES) by adopting the artificialtechnology. By reasoning out the conclusion from the fitting results of failure data of asoftware project, the SRES can recommend users “the most suitable model” as a softwarereliability measurement model. We believe that the SRES can overcome the inconsistency inapplications of software reliability models well. We report investigation results of singularity and parameter estimation methods of models, LVLM and LVQM.
