Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing addit...Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.展开更多
The rapid advancement of machine learning based tight-binding Hamiltonian(MLTB)methods has opened new avenues for efficient and accurate electronic structure simulations,particularly in large-scale systems and long-ti...The rapid advancement of machine learning based tight-binding Hamiltonian(MLTB)methods has opened new avenues for efficient and accurate electronic structure simulations,particularly in large-scale systems and long-time scenarios.This review begins with a concise overview of traditional tight-binding(TB)models,including both(semi-)empirical and first-principles approaches,establishing the foundation for understanding MLTB developments.We then present a systematic classification of existing MLTB methodologies,grouped into two major categories:direct prediction of TB Hamiltonian elements and inference of empirical parameters.A comparative analysis with other ML-based electronic structure models is also provided,highlighting the advancement of MLTB approaches.Finally,we explore the emerging MLTB application ecosystem,highlighting how the integration of MLTB models with a diverse suite of post-processing tools from linear-scaling solvers to quantum transport frameworks and molecular dynamics interfaces is essential for tackling complex scientific problems across different domains.The continued advancement of this integrated paradigm promises to accelerate materials discovery and open new frontiers in the predictive simulation of complex quantum phenomena.展开更多
Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presen...Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presents significant challenges.In this study,a novel research method was introduced for investigating the solidification process of ductile iron pipe,namely thermal simulation of ductile iron pipe.Comparative research was conducted on the microstructure and properties of the thermal simulation sample and the ductile iron pipe.The findings indicate that the thermal simulation sample and ductile iron pipe exhibit good heat transfer similarity and microstructure similarity.The difference of cooling rate between thermal simulation sample and ductile pipe is less than 0.24℃·s^(-1),and the difference of microstructure content of free cementite,ferrite,and pearlite is less than 5%.The tensile strength of annealed ductile iron pipe is 466 MPa,with an elongation of 16.1%and a Brinell hardness of 156.5 HBW.In comparison,the tensile strength of annealed thermal simulation sample is 482.0 MPa,with an elongation of 15.5%and a Brinell hardness of 159.0 HBW.These results suggest that the thermal simulation experimental research method is both scientific and feasible,offering an objective,reliable,and cost-effective approach to laboratory research on ductile iron pipe.展开更多
Cubic-shaped magnetic particles subjected to a dimensionless uniaxial anisotropy(Q=0.1)aligned with one of the crystallographic axes provide an ideal system for investigating magnetic equilibrium states.In this system...Cubic-shaped magnetic particles subjected to a dimensionless uniaxial anisotropy(Q=0.1)aligned with one of the crystallographic axes provide an ideal system for investigating magnetic equilibrium states.In this system,three fundamental magnetization configurations are identified:(i)the flower state,(ii)the twisted flower state,and(iii)the vortex state.This problem corresponds to standard problem No.3 proposed by the NIST Micromagnetics Modeling Group,widely adopted as a benchmark for validating computational micromagnetics methods.In this work,we approach the problem using a computational method based on direct dipolar interactions,in contrast to conventional techniques that typically compute the demagnetizing field via finite difference-based fast Fourier transform(FFT)methods,tensor grid approaches,or finite element formulations.Our results are compared with established literature data,focusing on the dimensionless parameterλ=L/l_(ex),where L is the cube edge length and l_(ex)is the exchange length of the material.To analyze equilibrium state transitions,we systematically varied the size L as a function of the simulation cell number N and intercellular spacing a,determining the criticalλvalue associated with configuration changes.Our simulations reveal that the transition between the twisted flower and vortex states occurs atλ≈8.45,consistent with values reported in the literature,validating our code(Grupo de Física da Matéeria Condensada-UFJF),and shows that this standard problem can be resolved using only interaction dipolar of a direct way without the need for sophisticated additional calculations.展开更多
This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the pred...This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.展开更多
Objectives This study aimed to compare the effectiveness of the semi-virtual simulation and traditional simulation teaching models based on the Standards of Best Practice(SOBP)according to the International Nursing As...Objectives This study aimed to compare the effectiveness of the semi-virtual simulation and traditional simulation teaching models based on the Standards of Best Practice(SOBP)according to the International Nursing Association for Clinical Simulation and Learning(INACSL)in the Adult Nursing course.Methods This study used a quasi-experimental design.A total of 94 third-year nursing students from a university in Beijing between November and December 2022 were recruited as participants.An innovative semi-virtual simulation teaching model was designed based on the SOBP established by the INACSL.In the Adult Nursing course,both the semi-virtual and traditional simulation teaching models were implemented.At the end of the simulation sessions,participants completed the Chinese version of the Simulation Effectiveness Tool-Modified(SET-M)to assess the effectiveness of the two teaching models.Results All nursing students completed the simulation sessions.There was no difference(t=−0.93,P=0.353)in the total scores between the semi-virtual simulation teaching model(50.87±5.30)and the traditional simulation teaching model(50.37±5.16).However,there was a statistically significant difference(t=−2.65,P=0.010)in the prebriefing section(semi-virtual simulation:5.60±0.71;traditional simulation:5.33±0.78).In contrast,no statistically significant differences were found for the scenario and debriefing sections(P>0.05).At the individual item level,statistical differences(P<0.05)between the two models were identified for items 1 and 9,but not for the remaining items(P>0.05).By analyzing the open-ended question,it was found that both simulation models were effective,and students’comments were similar.Conclusions The study demonstrated equivalent effectiveness between the semi-virtual and traditional simulation teaching models.Semi-virtual simulation teaching model could offer a more flexible and feasible approach to simulation teaching.展开更多
In sediment transport on a mobile erodible bed,near-bed particles tend to preferentially locate under specific flow regions and form an uneven bedform.These moving and mobile particles can significantly modulate turbu...In sediment transport on a mobile erodible bed,near-bed particles tend to preferentially locate under specific flow regions and form an uneven bedform.These moving and mobile particles can significantly modulate turbulence at various scales,from inertial large-scale motions to small viscous motions.This study analyzes the particle-resolved direct numerical simulation data of particle-laden two-phase flow with multilayers of particles in turbulent flows over static and mobile beds.The double-average method is adopted for energy transfer analysis.The result shows that the alternative streaky bedform in the spanwise directions correlates with the streak structures in the near-wall turbulence in the mobile bed case.The energy redistribution and exchange,as well as the dissipation,are analyzed in detail,and an energy transfer diagram is given in the last to summarize the energy transfer processes.In both the static and mobile bed cases,flow energy is introduced into the system via the work performed by volume forces acting on the mean flow.The viscous dissipations in the double mean and form-induced fields are more pronounced in the static bed case,and the work done by the fluid-particle interfacial stress in the double mean and turbulent fields is more pronounced in the mobile bed case.The prominent energy contribution in the form-induced field is the production by the form-induced stress on the mean strain in the mobile bed case.In addition,sediment transport involving a limited number of mobile particles is insufficient to capture the energy transfer processes that occur over the troughs and may intertwine the energy transfer processes over the mobile particles and the fixed particle bed.展开更多
As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode mate...As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode materials undergo complex ion intercalation and deintercalation processes,accompanied by defect formation and structural evolution.However,the microscopic mechanisms underlying processes such as cation disordering,lattice oxygen loss,and stage structure formation are still not fully understood.To address these challenges,we have developed the Electrode Dynamic Ion Intercalation/Deintercalation Simulator(EDIS),a software platform designed to simulate the dynamic processes of ion intercalation and deintercalation in electrode materials.Leveraging high-precision machine learning potentials,EDIS can efficiently model structural evolution and lithium-ion diffusion behavior under various states of charge and discharge,achieving accuracy approaching that of quantum mechanical methods in relevant chemical spaces.The software supports quantitative analysis of how variations in lithium-ion concentration and distribution affect lithium-ion transport properties,enables evaluation of the impact of structural defects,and allows for tracking of both structural evolution and transport characteristics during continuous cycling.EDIS is versatile and can be extended to sodium-ion batteries and related systems.By enabling in-depth analysis of these microscopic processes,EDIS provides a robust theoretical tool for mechanistic studies and the rational design of high-performance electrode materials for next-generation lithium-ion batteries.展开更多
Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical si...Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.展开更多
The stochastic extended finite-fault simulation method(EXSIM)is a widely used tool in seismological research,with applications in ground motion prediction and simulation,seismic hazard analysis,and engineering studies...The stochastic extended finite-fault simulation method(EXSIM)is a widely used tool in seismological research,with applications in ground motion prediction and simulation,seismic hazard analysis,and engineering studies.However,recent studies have revealed a significant limitation:EXSIM tends to overpredict ground motions in the low-to-intermediate frequency range,particularly for large thrust earthquakes that are often characterized by a double-corner-frequency source model.To address this issue and enhance simulation accuracy,this study introduces two key improvements:(1)a novel asperity-distributed stress-drop composite fault model and(2)a hybrid application of EXSIM with the composite fault model.The proposed method is validated through its application to the 2013 M_(w)6.7 Lushan earthquake that occurred in China and six thrust earthquakes with an M_(w)≥6.5 in Japan.By comparing the simulated ground motions with recorded data,the results demonstrate that the improved method achieves consistent accuracy across the high-and low-frequency spectrum(combined goodness-of-fit:CGOF<0.35).This study significantly broadens the applicability of stochastic finite-fault simulations,enabling more reliable predictions for a wider range of seismic scenarios,including complex thrust faulting events.展开更多
Compared to the well-studied two-dimensional(2D)ferroelectricity,the appearance of 2D antiferroelectricity is much rarer,where local dipoles from the nonequivalent sublattices within 2D monolayers are oppositely orien...Compared to the well-studied two-dimensional(2D)ferroelectricity,the appearance of 2D antiferroelectricity is much rarer,where local dipoles from the nonequivalent sublattices within 2D monolayers are oppositely oriented.Using NbOCl_(2) monolayer with competing ferroelectric(FE)and antiferroelectric(AFE)phases as a 2D material platform,we demonstrate the emergence of intrinsic antiferroelectricity in NbOCl_(2) monolayer under experimentally accessible shear strain,along with new functionality associated with electric field-induced AFE-to-FE phase transition.Specifically,the complex configuration space accommodating FE and AFE phases,polarization switching kinetics,and finite temperature thermodynamic properties of 2D NbOCl_(2) are all accurately predicted by large-scale molecular dynamics simulations based on deep learning interatomic potential model.Moreover,room temperature stable antiferroelectricity with low polarization switching barrier and one-dimensional collinear polarization arrangement is predicted in shear-deformed NbOCl_(2) monolayer.The transition from AFE to FE phase in 2D NbOCl_(2) can be triggered by a low critical electric field,leading to a double polarization–electric(P–E)loop with small hysteresis.A new type of optoelectronic device composed of AFE-NbOCl_(2) is proposed,enabling electric“writing”and nonlinear optical“reading”logical operation with fast operation speed and low power consumption.展开更多
This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
With the illustration of a specific problem, this paper demonstrates that using Monte Carlo Simulation technology will improve intuitive effect of teaching Probability and Mathematical Statistics course, and save inst...With the illustration of a specific problem, this paper demonstrates that using Monte Carlo Simulation technology will improve intuitive effect of teaching Probability and Mathematical Statistics course, and save instructors' effort as well.And it is estimated that Monte Carlo Simulation technology will be one of the major teaching methods for Probability and Mathematical Statistics course in the future.展开更多
Plant invasion refers to the phenomenon that some plants grow too fast due to they are far away from the original living environment or predators, affecting the local environment. With the development of tourism and t...Plant invasion refers to the phenomenon that some plants grow too fast due to they are far away from the original living environment or predators, affecting the local environment. With the development of tourism and trade, the harm caused by invasive plants will be more and more serious. Therefore, it is necessary to ex- plore an effective method for controlling plant invasion through qualitative and quan- titative research. In this paper, the models were established for the early and late harmful plant invasion control. The huge computation was completed by the com- puter programming to obtain the optimal solutions of the models. The real meaning of the optimal solution was further discussed. Through numerical simulations and discussion, it could be concluded that the quantitative research on the invasive plant control had a certain application value.展开更多
A three-phase reactor mathematical model was set up to simulate and design a three-phase bubble column reactor for direct synthesis of dimethyl ether （DME） from syngas, considering both the influence of part inert c...A three-phase reactor mathematical model was set up to simulate and design a three-phase bubble column reactor for direct synthesis of dimethyl ether （DME） from syngas, considering both the influence of part inert carrier backmixing on transfer and the influence of catalyst grain sedimentation on reaction. On the basis of this model, the influences of the size and reaction conditions of a 100000 t/a DME reactor on capacity were investigated. The optimized size of the 10000 t/a DME synthesis reactor was proposed as follows： diameter 3.2 m, height 20 m, built-in 400 tube heat exchanger （Ф 38×2 mm）, and inert heat carrier paraffin oil 68 t and catalyst 34.46 t. Reaction temperature and pressure were important factors influencing the reaction conversion for different size reactors. Under the condition of uniform catalyst concentration distribution, higher pressure and temperature were proposed to achieve a higher production capacity of DME. The best ratio of fresh syngas for DME synthesis was 2.04.展开更多
The object of this study was to find the optimum conditions for the production of a sandwich composite from the sheets of brass-steel-brass. The experimental data obtained during the production process were used to va...The object of this study was to find the optimum conditions for the production of a sandwich composite from the sheets of brass-steel-brass. The experimental data obtained during the production process were used to validate the simulation program, which was written to establish the relation between the interface morphology and the thickness reduction amount of the composite. For this purpose, two surfaces of a steel sheet were first prepared by scratching brushing before inserting it between two brass sheets with smooth surfaces. Three sheets were then subjected to a cold rolling process for producing a tri-layer composite with various thick- nesses. The sheet interface after rolling was studied by different techniques, and the bonding strength for each rolling condition was determined by peeling test. Moreover, a relation between interfacial bonding strength and thickness reduction was found. The simulation results were compared with the experimental data and the available theoretical models to modify the original simulation program with high application efficiency used for predicting the behavior of the interface under different pressures.展开更多
Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape not...Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.展开更多
The mathematical model for the thermal process of billets rolling has beenestablished, including transporting in air and temperature-holding cover, descaling withhigh-pressure water, and the process of rolling and coo...The mathematical model for the thermal process of billets rolling has beenestablished, including transporting in air and temperature-holding cover, descaling withhigh-pressure water, and the process of rolling and cooling in water box. The calculated data by themodel have been compared with the measured data and the results show that the model is right andcreditable. Based on the model, the main thermal characters of rolling line have been simulated andthe influence of all the parameters on the temperature of rolling has been analyzed.展开更多
基金National Key Research and Development Program of China(2022YFB4600902)Shandong Provincial Science Foundation for Outstanding Young Scholars(ZR2024YQ020)。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising approach for fabricating large-scale components.However,conventional WAAM still faces challenges in optimizing microstructural evolution,minimizing additive-induced defects,and alleviating residual stress and deformation,all of which are critical for enhancing the mechanical performance of the manufactured parts.Integrating interlayer friction stir processing(FSP)into WAAM significantly enhances the quality of deposited materials.However,numerical simulation research focusing on elucidating the associated thermomechanical coupling mechanisms remains insufficient.A comprehensive numerical model was developed to simulate the thermomechanical coupling behavior in friction stir-assisted WAAM.The influence of post-deposition FSP on the coupled thermomechanical response of the WAAM process was analyzed quantitatively.Moreover,the residual stress distribution and deformation behavior under both single-layer and multilayer deposition conditions were investigated.Thermal analysis of different deposition layers in WAAM and friction stir-assisted WAAM was conducted.Results show that subsequent layer deposition induces partial remelting of the previously solidified layer,whereas FSP does not cause such remelting.Furthermore,thermal stress and deformation analysis confirm that interlayer FSP effectively mitigates residual stresses and distortion in WAAM components,thereby improving their structural integrity and mechanical properties.
基金supported by the Advanced Materials-National Science and Technology Major Project(Grant No.2025ZD0618401)the National Natural Science Foundation of China(Grant No.12504285)+1 种基金the Natural Science Foundation of Jiangsu Province(Grant No.BK20250472)NFSG grant from BITS-Pilani,Dubai campus。
文摘The rapid advancement of machine learning based tight-binding Hamiltonian(MLTB)methods has opened new avenues for efficient and accurate electronic structure simulations,particularly in large-scale systems and long-time scenarios.This review begins with a concise overview of traditional tight-binding(TB)models,including both(semi-)empirical and first-principles approaches,establishing the foundation for understanding MLTB developments.We then present a systematic classification of existing MLTB methodologies,grouped into two major categories:direct prediction of TB Hamiltonian elements and inference of empirical parameters.A comparative analysis with other ML-based electronic structure models is also provided,highlighting the advancement of MLTB approaches.Finally,we explore the emerging MLTB application ecosystem,highlighting how the integration of MLTB models with a diverse suite of post-processing tools from linear-scaling solvers to quantum transport frameworks and molecular dynamics interfaces is essential for tackling complex scientific problems across different domains.The continued advancement of this integrated paradigm promises to accelerate materials discovery and open new frontiers in the predictive simulation of complex quantum phenomena.
基金financially supported by the National Natural Science Foundation of China(52130109)。
文摘Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presents significant challenges.In this study,a novel research method was introduced for investigating the solidification process of ductile iron pipe,namely thermal simulation of ductile iron pipe.Comparative research was conducted on the microstructure and properties of the thermal simulation sample and the ductile iron pipe.The findings indicate that the thermal simulation sample and ductile iron pipe exhibit good heat transfer similarity and microstructure similarity.The difference of cooling rate between thermal simulation sample and ductile pipe is less than 0.24℃·s^(-1),and the difference of microstructure content of free cementite,ferrite,and pearlite is less than 5%.The tensile strength of annealed ductile iron pipe is 466 MPa,with an elongation of 16.1%and a Brinell hardness of 156.5 HBW.In comparison,the tensile strength of annealed thermal simulation sample is 482.0 MPa,with an elongation of 15.5%and a Brinell hardness of 159.0 HBW.These results suggest that the thermal simulation experimental research method is both scientific and feasible,offering an objective,reliable,and cost-effective approach to laboratory research on ductile iron pipe.
基金CAPES,CNPq,and FAPEMIG(Brazilian Agencies)for their financial support。
文摘Cubic-shaped magnetic particles subjected to a dimensionless uniaxial anisotropy(Q=0.1)aligned with one of the crystallographic axes provide an ideal system for investigating magnetic equilibrium states.In this system,three fundamental magnetization configurations are identified:(i)the flower state,(ii)the twisted flower state,and(iii)the vortex state.This problem corresponds to standard problem No.3 proposed by the NIST Micromagnetics Modeling Group,widely adopted as a benchmark for validating computational micromagnetics methods.In this work,we approach the problem using a computational method based on direct dipolar interactions,in contrast to conventional techniques that typically compute the demagnetizing field via finite difference-based fast Fourier transform(FFT)methods,tensor grid approaches,or finite element formulations.Our results are compared with established literature data,focusing on the dimensionless parameterλ=L/l_(ex),where L is the cube edge length and l_(ex)is the exchange length of the material.To analyze equilibrium state transitions,we systematically varied the size L as a function of the simulation cell number N and intercellular spacing a,determining the criticalλvalue associated with configuration changes.Our simulations reveal that the transition between the twisted flower and vortex states occurs atλ≈8.45,consistent with values reported in the literature,validating our code(Grupo de Física da Matéeria Condensada-UFJF),and shows that this standard problem can be resolved using only interaction dipolar of a direct way without the need for sophisticated additional calculations.
基金supported by the National Key R&D Program of China[grant number 2023YFC3008004]。
文摘This study introduces a new ocean surface friction velocity scheme and a modified Thompson cloud microphysics parameterization scheme into the CMA-TYM model.The impact of these two parameterization schemes on the prediction of the movement track and intensity of Typhoon Kompasu in 2021 is examined.Additionally,the possible reasons for their effects on tropical cyclone(TC)intensity prediction are analyzed.Statistical results show that both parameterization schemes improve the predictions of Typhoon Kompasu’s track and intensity.The influence on track prediction becomes evident after 60 h of model integration,while the significant positive impact on intensity prediction is observed after 66 h.Further analysis reveals that these two schemes affect the timing and magnitude of extreme TC intensity values by influencing the evolution of the TC’s warm-core structure.
文摘Objectives This study aimed to compare the effectiveness of the semi-virtual simulation and traditional simulation teaching models based on the Standards of Best Practice(SOBP)according to the International Nursing Association for Clinical Simulation and Learning(INACSL)in the Adult Nursing course.Methods This study used a quasi-experimental design.A total of 94 third-year nursing students from a university in Beijing between November and December 2022 were recruited as participants.An innovative semi-virtual simulation teaching model was designed based on the SOBP established by the INACSL.In the Adult Nursing course,both the semi-virtual and traditional simulation teaching models were implemented.At the end of the simulation sessions,participants completed the Chinese version of the Simulation Effectiveness Tool-Modified(SET-M)to assess the effectiveness of the two teaching models.Results All nursing students completed the simulation sessions.There was no difference(t=−0.93,P=0.353)in the total scores between the semi-virtual simulation teaching model(50.87±5.30)and the traditional simulation teaching model(50.37±5.16).However,there was a statistically significant difference(t=−2.65,P=0.010)in the prebriefing section(semi-virtual simulation:5.60±0.71;traditional simulation:5.33±0.78).In contrast,no statistically significant differences were found for the scenario and debriefing sections(P>0.05).At the individual item level,statistical differences(P<0.05)between the two models were identified for items 1 and 9,but not for the remaining items(P>0.05).By analyzing the open-ended question,it was found that both simulation models were effective,and students’comments were similar.Conclusions The study demonstrated equivalent effectiveness between the semi-virtual and traditional simulation teaching models.Semi-virtual simulation teaching model could offer a more flexible and feasible approach to simulation teaching.
基金supported by the National Natural Science Foundation of China(Grant Nos.12388101 and 12472221)the Fundamental Research Funds for the Central Universities(Grant No.lzujbky-2024-oy10).
文摘In sediment transport on a mobile erodible bed,near-bed particles tend to preferentially locate under specific flow regions and form an uneven bedform.These moving and mobile particles can significantly modulate turbulence at various scales,from inertial large-scale motions to small viscous motions.This study analyzes the particle-resolved direct numerical simulation data of particle-laden two-phase flow with multilayers of particles in turbulent flows over static and mobile beds.The double-average method is adopted for energy transfer analysis.The result shows that the alternative streaky bedform in the spanwise directions correlates with the streak structures in the near-wall turbulence in the mobile bed case.The energy redistribution and exchange,as well as the dissipation,are analyzed in detail,and an energy transfer diagram is given in the last to summarize the energy transfer processes.In both the static and mobile bed cases,flow energy is introduced into the system via the work performed by volume forces acting on the mean flow.The viscous dissipations in the double mean and form-induced fields are more pronounced in the static bed case,and the work done by the fluid-particle interfacial stress in the double mean and turbulent fields is more pronounced in the mobile bed case.The prominent energy contribution in the form-induced field is the production by the form-induced stress on the mean strain in the mobile bed case.In addition,sediment transport involving a limited number of mobile particles is insufficient to capture the energy transfer processes that occur over the troughs and may intertwine the energy transfer processes over the mobile particles and the fixed particle bed.
基金supported by the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB1040300)the National Natural Science Foundation of China(Grant No.52172258)。
文摘As the core determinant of lithium-ion battery performance,electrode materials play a crucial role in defining the battery's capacity,cycling stability,and durability.During charging and discharging,electrode materials undergo complex ion intercalation and deintercalation processes,accompanied by defect formation and structural evolution.However,the microscopic mechanisms underlying processes such as cation disordering,lattice oxygen loss,and stage structure formation are still not fully understood.To address these challenges,we have developed the Electrode Dynamic Ion Intercalation/Deintercalation Simulator(EDIS),a software platform designed to simulate the dynamic processes of ion intercalation and deintercalation in electrode materials.Leveraging high-precision machine learning potentials,EDIS can efficiently model structural evolution and lithium-ion diffusion behavior under various states of charge and discharge,achieving accuracy approaching that of quantum mechanical methods in relevant chemical spaces.The software supports quantitative analysis of how variations in lithium-ion concentration and distribution affect lithium-ion transport properties,enables evaluation of the impact of structural defects,and allows for tracking of both structural evolution and transport characteristics during continuous cycling.EDIS is versatile and can be extended to sodium-ion batteries and related systems.By enabling in-depth analysis of these microscopic processes,EDIS provides a robust theoretical tool for mechanistic studies and the rational design of high-performance electrode materials for next-generation lithium-ion batteries.
基金financially supported by the National Key Research and Development Program of China (2022YFB3706802)。
文摘Automation and intelligence have become the primary trends in the design of investment casting processes.However,the design of gating and riser systems still lacks precise quantitative evaluation criteria.Numerical simulation plays a significant role in quantitatively evaluating current processes and making targeted improvements,but its limitations lie in the inability to dynamically reflect the formation outcomes of castings under varying process conditions,making real-time adjustments to gating and riser designs challenging.In this study,an automated design model for gating and riser systems based on integrated parametric 3D modeling-simulation framework is proposed,which enhances the flexibility and usability of evaluating the casting process by simulation.Firstly,geometric feature extraction technology is employed to obtain the geometric information of the target casting.Based on this information,an automated design framework for gating and riser systems is established,incorporating multiple structural parameters for real-time process control.Subsequently,the simulation results for various structural parameters are analyzed,and the influence of these parameters on casting formation is thoroughly investigated.Finally,the optimal design scheme is generated and validated through experimental verification.Simulation analysis and experimental results show that using a larger gate neck(24 mm in side length) and external risers promotes a more uniform temperature distribution and a more stable flow state,effectively eliminating shrinkage cavities and enhancing process yield by 15%.
基金National Key Research and Development Program of China under Grant No.2022YFC3003601National Natural Science Foundation of China under Grant No.52478570+1 种基金Heilongjiang Provincial Natural Science Foundation Outstanding Youth Program under Grant No.J020245002the Key Research and Development Program of Xinjiang Production and Construction Corps under Grant No.2024AB077。
文摘The stochastic extended finite-fault simulation method(EXSIM)is a widely used tool in seismological research,with applications in ground motion prediction and simulation,seismic hazard analysis,and engineering studies.However,recent studies have revealed a significant limitation:EXSIM tends to overpredict ground motions in the low-to-intermediate frequency range,particularly for large thrust earthquakes that are often characterized by a double-corner-frequency source model.To address this issue and enhance simulation accuracy,this study introduces two key improvements:(1)a novel asperity-distributed stress-drop composite fault model and(2)a hybrid application of EXSIM with the composite fault model.The proposed method is validated through its application to the 2013 M_(w)6.7 Lushan earthquake that occurred in China and six thrust earthquakes with an M_(w)≥6.5 in Japan.By comparing the simulated ground motions with recorded data,the results demonstrate that the improved method achieves consistent accuracy across the high-and low-frequency spectrum(combined goodness-of-fit:CGOF<0.35).This study significantly broadens the applicability of stochastic finite-fault simulations,enabling more reliable predictions for a wider range of seismic scenarios,including complex thrust faulting events.
基金supported by the National Natural Science Foundation of China (Grant No.11574244 for G.Y.G.)the XJTU Research Fund for AI Science (Grant No.2025YXYC011 for G.Y.G.)the Hong Kong Global STEM Professorship Scheme (for X.C.Z.)。
文摘Compared to the well-studied two-dimensional(2D)ferroelectricity,the appearance of 2D antiferroelectricity is much rarer,where local dipoles from the nonequivalent sublattices within 2D monolayers are oppositely oriented.Using NbOCl_(2) monolayer with competing ferroelectric(FE)and antiferroelectric(AFE)phases as a 2D material platform,we demonstrate the emergence of intrinsic antiferroelectricity in NbOCl_(2) monolayer under experimentally accessible shear strain,along with new functionality associated with electric field-induced AFE-to-FE phase transition.Specifically,the complex configuration space accommodating FE and AFE phases,polarization switching kinetics,and finite temperature thermodynamic properties of 2D NbOCl_(2) are all accurately predicted by large-scale molecular dynamics simulations based on deep learning interatomic potential model.Moreover,room temperature stable antiferroelectricity with low polarization switching barrier and one-dimensional collinear polarization arrangement is predicted in shear-deformed NbOCl_(2) monolayer.The transition from AFE to FE phase in 2D NbOCl_(2) can be triggered by a low critical electric field,leading to a double polarization–electric(P–E)loop with small hysteresis.A new type of optoelectronic device composed of AFE-NbOCl_(2) is proposed,enabling electric“writing”and nonlinear optical“reading”logical operation with fast operation speed and low power consumption.
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
文摘With the illustration of a specific problem, this paper demonstrates that using Monte Carlo Simulation technology will improve intuitive effect of teaching Probability and Mathematical Statistics course, and save instructors' effort as well.And it is estimated that Monte Carlo Simulation technology will be one of the major teaching methods for Probability and Mathematical Statistics course in the future.
文摘Plant invasion refers to the phenomenon that some plants grow too fast due to they are far away from the original living environment or predators, affecting the local environment. With the development of tourism and trade, the harm caused by invasive plants will be more and more serious. Therefore, it is necessary to ex- plore an effective method for controlling plant invasion through qualitative and quan- titative research. In this paper, the models were established for the early and late harmful plant invasion control. The huge computation was completed by the com- puter programming to obtain the optimal solutions of the models. The real meaning of the optimal solution was further discussed. Through numerical simulations and discussion, it could be concluded that the quantitative research on the invasive plant control had a certain application value.
基金This work was supported by the National Basic Research Program of China (2005CB221205)
文摘A three-phase reactor mathematical model was set up to simulate and design a three-phase bubble column reactor for direct synthesis of dimethyl ether （DME） from syngas, considering both the influence of part inert carrier backmixing on transfer and the influence of catalyst grain sedimentation on reaction. On the basis of this model, the influences of the size and reaction conditions of a 100000 t/a DME reactor on capacity were investigated. The optimized size of the 10000 t/a DME synthesis reactor was proposed as follows： diameter 3.2 m, height 20 m, built-in 400 tube heat exchanger （Ф 38×2 mm）, and inert heat carrier paraffin oil 68 t and catalyst 34.46 t. Reaction temperature and pressure were important factors influencing the reaction conversion for different size reactors. Under the condition of uniform catalyst concentration distribution, higher pressure and temperature were proposed to achieve a higher production capacity of DME. The best ratio of fresh syngas for DME synthesis was 2.04.
文摘The object of this study was to find the optimum conditions for the production of a sandwich composite from the sheets of brass-steel-brass. The experimental data obtained during the production process were used to validate the simulation program, which was written to establish the relation between the interface morphology and the thickness reduction amount of the composite. For this purpose, two surfaces of a steel sheet were first prepared by scratching brushing before inserting it between two brass sheets with smooth surfaces. Three sheets were then subjected to a cold rolling process for producing a tri-layer composite with various thick- nesses. The sheet interface after rolling was studied by different techniques, and the bonding strength for each rolling condition was determined by peeling test. Moreover, a relation between interfacial bonding strength and thickness reduction was found. The simulation results were compared with the experimental data and the available theoretical models to modify the original simulation program with high application efficiency used for predicting the behavior of the interface under different pressures.
基金Project(51004085)supported by the National Natural Science Foundation of China
文摘Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.
文摘The mathematical model for the thermal process of billets rolling has beenestablished, including transporting in air and temperature-holding cover, descaling withhigh-pressure water, and the process of rolling and cooling in water box. The calculated data by themodel have been compared with the measured data and the results show that the model is right andcreditable. Based on the model, the main thermal characters of rolling line have been simulated andthe influence of all the parameters on the temperature of rolling has been analyzed.
