The service load on high temperature rotating components of aero-engines generally exhibits flight mission characteristics. The general shape of the load spectrum is that Type Ⅲ/Ⅳ cyclic loading and creep loading ar...The service load on high temperature rotating components of aero-engines generally exhibits flight mission characteristics. The general shape of the load spectrum is that Type Ⅲ/Ⅳ cyclic loading and creep loading are superimposed on Type Ⅰ cyclic loading. Meanwhile, the sequence of the Type Ⅲ/Ⅳ cyclic and creep loading varies with mission. This work performed load spectrum test with this characteristic on the Ni-based alloy FGH96. Then a life prediction method was developed based on the Chaboche fatigue damage accumulation model and a modified time fraction model. Creep followed by Fatigue (C-F) test was carried out to reveal the creep-fatigue interaction and calibrate parameters. The results show that most test results fall within the 2-fold deviation band. The sequence of creep-fatigue loading within the load spectrum exhibited a limited effect on life. Finally, simplified methods were developed to improve analysis efficiency, and cases where simplified methods could replace the proposed method were discussed.展开更多
Based on the basic theory of mechanics,kinematic and dynamic analysis for a slider-crank mechanism with a balance mechanism is performed.The theoretical formula of the load spectrum for the interaction between the cra...Based on the basic theory of mechanics,kinematic and dynamic analysis for a slider-crank mechanism with a balance mechanism is performed.The theoretical formula of the load spectrum for the interaction between the crank shaft and the bearing seat of the upper beam is achieved by approximately simplifying the mechanical model of the crank shaft.The simulation for the load spectrum data of combined frame under the operating conditions of blanking or piling is performed using Matlab and the law of the load spectrum curves under these two conditions is analyzed.The simulation results show that under a no-load condition,the load spectrum curves of the interaction between the crank shaft and the bearing seat of the upper beam present a form of periodic sine wave and under the piling condition,the load spectrum curves of the interaction between the crank shaft and the bearing seat of the upper beam present a form of periodic pulse wave.The simulation results can provide a theoretical foundation for the load determination during the process of analyzing the dynamic characteristics on the combined frame of a closed high-speed press through the finite element method.展开更多
The rain-flow counting method is widely used to compile the fatigue load spectrum, The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reve...The rain-flow counting method is widely used to compile the fatigue load spectrum, The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reverse rain-flow counting method is proposed in this paper. In this counting method, the rule for counting of the rain-flow method is modified, so that the sequence of load-time need not be adjusted. This is a valid and useful method to count cycles and compile the load spectrum and it can be widely used in ocean engineering.展开更多
A filtering method of aero-engine load spectrum based on the rain flow counting is proposed in this paper.Firstly,the original load spectrum is counted through the rain flow method to get the peak and valley values.Th...A filtering method of aero-engine load spectrum based on the rain flow counting is proposed in this paper.Firstly,the original load spectrum is counted through the rain flow method to get the peak and valley values.Then,some data points in the original load spectrum are added between the peak and valley values.Finally,the filtering spectrum is obtained.The proposed method can reflect the path information of the original load spectrum.In addition,it can also eliminate the noise in the signal and improve the efficiency of signal processing,which is of practical significance for the research of aero-engine.展开更多
For the randomness of crane working load leading to the decrease of load spectrum prediction accuracy with time,an adaptive TSSA-HKRVM model for crane load spectrum regression prediction is proposed.The heterogeneous ...For the randomness of crane working load leading to the decrease of load spectrum prediction accuracy with time,an adaptive TSSA-HKRVM model for crane load spectrum regression prediction is proposed.The heterogeneous kernel relevance vector machine model(HKRVM)with comprehensive expression ability is established using the complementary advantages of various kernel functions.The combination strategy consisting of refraction reverse learning,golden sine,and Cauchy mutation+logistic chaotic perturbation is introduced to form a multi-strategy improved sparrow algorithm(TSSA),thus optimizing the relevant parameters of HKRVM.The adaptive updatingmechanismof the heterogeneous kernel RVMmodel under themulti-strategy improved sparrow algorithm(TSSA-HKMRVM)is defined by the sliding window design theory.Based on the sample data of the measured load spectrum,the trained adaptive TSSA-HKRVMmodel is employed to complete the prediction of the crane equivalent load spectrum.Applying this method toQD20/10 t×43m×12mgeneral bridge crane,the results show that:compared with other prediction models,although the complexity of the adaptive TSSA-HKRVMmodel is relatively high,the prediction accuracy of the load spectrum under long periods has been effectively improved,and the completeness of the load information during thewhole life cycle is relatively higher,with better applicability.展开更多
A new, more actual approach for omitting small loads in a loading history was pres-ented according to crack closure, and load interactive effects which are large on damage of com-ponents were studied. Intrinsic period...A new, more actual approach for omitting small loads in a loading history was pres-ented according to crack closure, and load interactive effects which are large on damage of com-ponents were studied. Intrinsic periodic spectrum block representing a damage element of a loadhistory, a new concept, was put out. It has been proven by theoretic analysis and tests that themodes of constructing fatigue loading spectrum have little effect on damage of components,which will change the incomplete knowledges on constructing fatigue spectrum ago.展开更多
The small load cycle dominates the load spectrum,resulting in inefficient laboratory-based accelerated reliability testing of tractors.While most traditional editing methods focus on accelerating single-type loading s...The small load cycle dominates the load spectrum,resulting in inefficient laboratory-based accelerated reliability testing of tractors.While most traditional editing methods focus on accelerating single-type loading spectrum,few are suitable for multi-type loading spectra.This paper proposes a synchronization acceleration method for the rotary tillage load spectrum based on wavelet transform.The method decomposes the power take-off(PTO)torque load data and suspension load data using Daubechies wavelet basis functions,calculates the square sum of cumulative wavelet components at each scale,and identifies large damage segments through threshold setting and Hilbert envelope analysis.Acceleration of the rotary tillage load spectrum is then achieved based on time-domain synchronization.In addition,to measure the acceleration efficiency of load spectrum and find the optimal acceleration parameters suitable for tractor tillage load spectra,a pseudo-damage acceleration efficiency(PDAE)index is proposed to evaluate the acceleration effect.Ultimately,through data comparison,the optimal acceleration parameters suitable for tractor tillage operation load spectra are determined.After acceleration,the time retention ratio of the rotary tillage load spectrum is 85.27%,the damage retention ratio of the PTO torque load spectrum is 97.14%,and the damage retention ratio of the suspension load spectrum is 96.94%.Compared to the damage retention acceleration method,the wavelet acceleration method saves an additional 10.07%of time while maintaining the effectiveness of the load spectrum.This study can provide a reference for accelerating the load spectrum of agricultural machinery and has significant implications for the field of accelerated reliability testing applications.展开更多
In fatigue damage tolerance verification tests of aircraft structures,the simulation and loading of flight-byflight spectra require considerable time and resources.To improve the efficiency of load spectrum design and...In fatigue damage tolerance verification tests of aircraft structures,the simulation and loading of flight-byflight spectra require considerable time and resources.To improve the efficiency of load spectrum design and testing,an equivalent constant-amplitude spectrum design method for flight-by-flight spectra is proposed based on the equivalence of crack growth behavior.By combining the Paris crack growth model with the Walker stress ratio correction,the equivalent stress amplitude is directly calculated using structural parameters and load spectrum characteristics,enabling a rapid transformation from variable-amplitude spectra to constant-amplitude spectra.The original spectrum is discretized based on the load-exceedance curve,and the equivalence relationship between multilevel block spectra and constant-amplitude spectra is established.Taking a typical lower wing skin structure of a transport aircraft as an example,two equivalent spectra are designed and validated through fatigue crack growth tests on 2024-T351 center-hole plate specimens.The experimental results show that the fatigue life deviation between the equivalent spectra and the original flight-by-flight spectrum is within 10%,demonstrating the effectiveness of the proposed method.Moreover,the equivalent spectrum constructed under the condition of invariant mean flight stress exhibits higher equivalence accuracy.The influence of spectral shape on the equivalent stress amplitude is further analyzed,revealing that the equivalent stress amplitude increases with the spectrum shape coefficient.The proposed method provides a useful reference for load spectrum design in aircraft structural damage tolerance verification tests.展开更多
In the fabrication and monitoring of parts in composite structures,which are being used more and more in a variety of engineering applications,the prediction and fatigue failure detection in composite materials is a d...In the fabrication and monitoring of parts in composite structures,which are being used more and more in a variety of engineering applications,the prediction and fatigue failure detection in composite materials is a difficult problem.This difficulty arises from several factors,such as the lack of a comprehensive investigation of the fatigue failure phenomena,the lack of a well-defined fatigue damage theory used for fatigue damage prediction,and the inhomogeneity of composites because of their multiple internal borders.This study investigates the fatigue behavior of carbon fiber reinforced with epoxy(CFRE)laminated composite plates under spectrum loading utilizing a uniqueDeep LearningNetwork consisting of a convolutional neural network(CNN).Themethod includes establishing Finite Element Model(FEM)in a plate model under a spectrum fatigue loading.Then,a CNN is trained for fatigue behavior prediction.The training phase produces promising results,showing the model’s performance with 94.21%accuracy,92.63%regression,and 91.55%F-score.To evaluate the model’s reliability,a comparison is made between fatigue data from the CNN and the FEM.It was found that the error band for this comparison is less than 0.3878MPa,affirming the accuracy and reliability of the proposed technique.The proposed method results converge with available experimental results in the literature,thus,the study suggests the broad applicability of this method to other different composite structures.展开更多
As the outfield load spectrum is so complicated that it cannot be used directly for test study in laboratory.This paper presents a method to determine load spectrum for high and low cycle combined fatigue of turbine m...As the outfield load spectrum is so complicated that it cannot be used directly for test study in laboratory.This paper presents a method to determine load spectrum for high and low cycle combined fatigue of turbine mortise at elevated temperature through experimental and numerical method.First of all,the low cycle load spectrum with duration time is determined through cumulative damage rule.The rain flow counting method is applied to obtain main cycles and sub cycles,and then the stress cycle is converted into pulsation cycle(stress ratio=0)based on the S-N curve and the Goodman curve;Secondly,three groups of different amplitudes tests are established to determine the high cycle amplitude.Finally,another three groups of the high-low combined cycle fatigue(HLCCF)tests for turbine mortise of a certain type engine are carried out.The results show that the macro and micro failure modes are identical with outfield's,which verifies the accuracy of the conversion method.展开更多
The aim of this study was to analyze the effects of the planting distance and depth on the power take-off(PTO)load spectrum of a small riding-type transplanter for the optimal design of the transplanter.To measure loa...The aim of this study was to analyze the effects of the planting distance and depth on the power take-off(PTO)load spectrum of a small riding-type transplanter for the optimal design of the transplanter.To measure load data during actual planting operation,a load measurement system was developed using a torque sensor,a data acquisition system,and an inverter.Field experiments were conducted at four planting distances(26 cm,35 cm,43 cm,and 80 cm)and three planting depths(85 mm,105 mm,and 136 mm)in a field with similar soil conditions.The measured load data were inverted into a load spectrum using rain-flow counting and Smith-Watson-Topper(SWT)methods.The safety factor of a transplanter according to the planting conditions was analyzed using the converted load spectrum and commercial software.The load spectrum for all planting conditions showed torque ratios similar within a high cycle region of 108 to 109.The torque ratio increased when the planting depth increased and planting distance decreased in the low cycle region under less than 108 cycles.The safety factors of the PTO driving gear and the driven gear increased as the planting distance increased at all planting depths.When the planting depth decreased at the same planting distance,the safety factor of the PTO gears increased.The results of this study might provide useful information for a transplanter PTO design considering the working load according to the various planting conditions.展开更多
The rainflow counting method is a reasonable cyclecounting procedure for fatigue life calculation and simulation testing of structures.It defines cycles as closed stress /strain hysteresis loops.Application of the rai...The rainflow counting method is a reasonable cyclecounting procedure for fatigue life calculation and simulation testing of structures.It defines cycles as closed stress /strain hysteresis loops.Application of the rainflow counting method requires a data processing of the loading spectrum,which consists of the elimination of non-peak value data points,load time histories adjustment and loop extraction.In the data processing of the loading spectrum,if a stress point is neither the peak nor the valley,it will be identified and eliminated from the loading spectrum.Generally,the loading process is idealized as a single peak-valley straight line.But in actually,there are polylines or nearly straight lines between peaks and valleys which can't be ignored.Therefore,in the process of eliminating such data points,it will produce error in method itself.To reduce the error produced by the traditional method itself,a new method which can well simplify the polylines in data processing of loading spectrum is proposed in this paper.Comparing with the original approximation method,the proposed method has higher precision.展开更多
Sediment load estimation is generally required for study and development of water resources system. In this regard, artificial neural network (ANN) is the most widely used modeling tool especially in data-constraint r...Sediment load estimation is generally required for study and development of water resources system. In this regard, artificial neural network (ANN) is the most widely used modeling tool especially in data-constraint regions. This research attempts to combine SSA (singular spectrum analysis) with ANN, hereafter called SSA-ANN model, with expectation to improve the accuracy of sediment load predicted by the existing ANN approach. Two different catchments located in the Lower Mekong Basin (LMB) were selected for the study and the model performance was measured by several statistical indices. In comparing with ANN, the proposed SSA-ANN model shows its better performance repeatedly in both catchments. In validation stage, SSA-ANN is superior for larger Nash-Sutcliffe Efficiency about 24% in Ban Nong Kiang catchment and 7% in Nam Mae Pun Luang catchment. Other statistical measures of SSA-ANN are better than those of ANN as well. This improvement reveals the importance of SSA which filters noise containing in the raw time series and transforms the original input data to be near normal distribution which is favorable to model simulation. This coupled model is also recommended for the prediction of other water resources variables because extra input data are not required. Only additional computation, time series decomposition, is needed. The proposed technique could be potentially used to minimize the costly operation of sediment measurement in the LMB which is relatively rich in hydrometeorological records.展开更多
Based on the platform of Matlab and the theory of digital signal processing, we propose a method in the cepstrum domain for dynamic load spectra identification of machinery. We demonstrate that the dynamic load spectr...Based on the platform of Matlab and the theory of digital signal processing, we propose a method in the cepstrum domain for dynamic load spectra identification of machinery. We demonstrate that the dynamic load spectra can be identified from the response signal of the system, based on cepstra. An ARMA model is built based on the harmonic retrieval by high-order spectra. The coefficients of a Green function are determined and the window width can be estimated. Finally the effectiveness of the method is validated by simulation results.展开更多
风扇盘是航空发动机的重要断裂关键结构,为保障其服役安全性和可靠性,需要编制反映实际使用情况的载荷谱,用于疲劳寿命评定。基于某发动机2种任务类型的实际使用数据,进行了风扇盘单参数载荷统计分析,采用任务段分析法编制了中值转速谱...风扇盘是航空发动机的重要断裂关键结构,为保障其服役安全性和可靠性,需要编制反映实际使用情况的载荷谱,用于疲劳寿命评定。基于某发动机2种任务类型的实际使用数据,进行了风扇盘单参数载荷统计分析,采用任务段分析法编制了中值转速谱;采用SWT(Smith-Watson-Topper)公式和线性累积损伤理论计算载荷谱损伤,采用DTW(Dynamic Time Warping)方法进行载荷谱相似性分析,结合TC17钛合金模拟试件成组试验,建立了基于载荷谱相似性的损伤分析方法;进行了机群风扇盘转速谱损伤计算,获得载荷谱损伤样本,拟合优度检验表明风扇盘转速谱损伤服从对数正态分布,中值转速谱损伤接近机群转速谱中值损伤,验证了编谱方法的合理性。为准确评估风扇盘安全寿命提供了重要支撑。展开更多
基金supported by the National Science and Technology Major Project of China(No.J2019-IV-0017-0085)the National Natural Science Foundation of China(Nos.12172021,52205177)the Natural Science Foundation of Hunan Province,China(No.2021JJ40741).
文摘The service load on high temperature rotating components of aero-engines generally exhibits flight mission characteristics. The general shape of the load spectrum is that Type Ⅲ/Ⅳ cyclic loading and creep loading are superimposed on Type Ⅰ cyclic loading. Meanwhile, the sequence of the Type Ⅲ/Ⅳ cyclic and creep loading varies with mission. This work performed load spectrum test with this characteristic on the Ni-based alloy FGH96. Then a life prediction method was developed based on the Chaboche fatigue damage accumulation model and a modified time fraction model. Creep followed by Fatigue (C-F) test was carried out to reveal the creep-fatigue interaction and calibrate parameters. The results show that most test results fall within the 2-fold deviation band. The sequence of creep-fatigue loading within the load spectrum exhibited a limited effect on life. Finally, simplified methods were developed to improve analysis efficiency, and cases where simplified methods could replace the proposed method were discussed.
基金The Key Technologies R& D Program of Jiangsu Province(No. BE2006036)Transformation Program of Science and Technology Achievements of Jiangsu Province (No. BA2008030)
文摘Based on the basic theory of mechanics,kinematic and dynamic analysis for a slider-crank mechanism with a balance mechanism is performed.The theoretical formula of the load spectrum for the interaction between the crank shaft and the bearing seat of the upper beam is achieved by approximately simplifying the mechanical model of the crank shaft.The simulation for the load spectrum data of combined frame under the operating conditions of blanking or piling is performed using Matlab and the law of the load spectrum curves under these two conditions is analyzed.The simulation results show that under a no-load condition,the load spectrum curves of the interaction between the crank shaft and the bearing seat of the upper beam present a form of periodic sine wave and under the piling condition,the load spectrum curves of the interaction between the crank shaft and the bearing seat of the upper beam present a form of periodic pulse wave.The simulation results can provide a theoretical foundation for the load determination during the process of analyzing the dynamic characteristics on the combined frame of a closed high-speed press through the finite element method.
基金The project was financially supported by the National Natural Science Foundation of China (Grant No. 50078010)
文摘The rain-flow counting method is widely used to compile the fatigue load spectrum, The second stage counting of the rain-flow method is a troublesome process. In order to overcome this drawback, the rain-flow and reverse rain-flow counting method is proposed in this paper. In this counting method, the rule for counting of the rain-flow method is modified, so that the sequence of load-time need not be adjusted. This is a valid and useful method to count cycles and compile the load spectrum and it can be widely used in ocean engineering.
基金This work was supported by the National Basic Research Program of China,National Nature Science Foundation of China(No.51675266)the Foundation Research Funds for the Center in NUAA(Nos.NJ20160038,NS2017011)Foundation of Graduate Innovation Center in NUAA(No.kfjj20170220)。
文摘A filtering method of aero-engine load spectrum based on the rain flow counting is proposed in this paper.Firstly,the original load spectrum is counted through the rain flow method to get the peak and valley values.Then,some data points in the original load spectrum are added between the peak and valley values.Finally,the filtering spectrum is obtained.The proposed method can reflect the path information of the original load spectrum.In addition,it can also eliminate the noise in the signal and improve the efficiency of signal processing,which is of practical significance for the research of aero-engine.
基金sponsored by the National Natural Science Foundation of China(52105269).
文摘For the randomness of crane working load leading to the decrease of load spectrum prediction accuracy with time,an adaptive TSSA-HKRVM model for crane load spectrum regression prediction is proposed.The heterogeneous kernel relevance vector machine model(HKRVM)with comprehensive expression ability is established using the complementary advantages of various kernel functions.The combination strategy consisting of refraction reverse learning,golden sine,and Cauchy mutation+logistic chaotic perturbation is introduced to form a multi-strategy improved sparrow algorithm(TSSA),thus optimizing the relevant parameters of HKRVM.The adaptive updatingmechanismof the heterogeneous kernel RVMmodel under themulti-strategy improved sparrow algorithm(TSSA-HKMRVM)is defined by the sliding window design theory.Based on the sample data of the measured load spectrum,the trained adaptive TSSA-HKRVMmodel is employed to complete the prediction of the crane equivalent load spectrum.Applying this method toQD20/10 t×43m×12mgeneral bridge crane,the results show that:compared with other prediction models,although the complexity of the adaptive TSSA-HKRVMmodel is relatively high,the prediction accuracy of the load spectrum under long periods has been effectively improved,and the completeness of the load information during thewhole life cycle is relatively higher,with better applicability.
文摘A new, more actual approach for omitting small loads in a loading history was pres-ented according to crack closure, and load interactive effects which are large on damage of com-ponents were studied. Intrinsic periodic spectrum block representing a damage element of a loadhistory, a new concept, was put out. It has been proven by theoretic analysis and tests that themodes of constructing fatigue loading spectrum have little effect on damage of components,which will change the incomplete knowledges on constructing fatigue spectrum ago.
基金supported by the Basic Research Plan of Shanxi Province(Grant No.202203021212158)the National Key Laboratory Construction Project of Intelligent Agricultural Power Equipment(Grant No.2024AC047)the National Key Research and Development Plan of China(Grant No.2016YFD0700102).
文摘The small load cycle dominates the load spectrum,resulting in inefficient laboratory-based accelerated reliability testing of tractors.While most traditional editing methods focus on accelerating single-type loading spectrum,few are suitable for multi-type loading spectra.This paper proposes a synchronization acceleration method for the rotary tillage load spectrum based on wavelet transform.The method decomposes the power take-off(PTO)torque load data and suspension load data using Daubechies wavelet basis functions,calculates the square sum of cumulative wavelet components at each scale,and identifies large damage segments through threshold setting and Hilbert envelope analysis.Acceleration of the rotary tillage load spectrum is then achieved based on time-domain synchronization.In addition,to measure the acceleration efficiency of load spectrum and find the optimal acceleration parameters suitable for tractor tillage load spectra,a pseudo-damage acceleration efficiency(PDAE)index is proposed to evaluate the acceleration effect.Ultimately,through data comparison,the optimal acceleration parameters suitable for tractor tillage operation load spectra are determined.After acceleration,the time retention ratio of the rotary tillage load spectrum is 85.27%,the damage retention ratio of the PTO torque load spectrum is 97.14%,and the damage retention ratio of the suspension load spectrum is 96.94%.Compared to the damage retention acceleration method,the wavelet acceleration method saves an additional 10.07%of time while maintaining the effectiveness of the load spectrum.This study can provide a reference for accelerating the load spectrum of agricultural machinery and has significant implications for the field of accelerated reliability testing applications.
基金supported by the National Natural Science Foundation of China(No.52075244).
文摘In fatigue damage tolerance verification tests of aircraft structures,the simulation and loading of flight-byflight spectra require considerable time and resources.To improve the efficiency of load spectrum design and testing,an equivalent constant-amplitude spectrum design method for flight-by-flight spectra is proposed based on the equivalence of crack growth behavior.By combining the Paris crack growth model with the Walker stress ratio correction,the equivalent stress amplitude is directly calculated using structural parameters and load spectrum characteristics,enabling a rapid transformation from variable-amplitude spectra to constant-amplitude spectra.The original spectrum is discretized based on the load-exceedance curve,and the equivalence relationship between multilevel block spectra and constant-amplitude spectra is established.Taking a typical lower wing skin structure of a transport aircraft as an example,two equivalent spectra are designed and validated through fatigue crack growth tests on 2024-T351 center-hole plate specimens.The experimental results show that the fatigue life deviation between the equivalent spectra and the original flight-by-flight spectrum is within 10%,demonstrating the effectiveness of the proposed method.Moreover,the equivalent spectrum constructed under the condition of invariant mean flight stress exhibits higher equivalence accuracy.The influence of spectral shape on the equivalent stress amplitude is further analyzed,revealing that the equivalent stress amplitude increases with the spectrum shape coefficient.The proposed method provides a useful reference for load spectrum design in aircraft structural damage tolerance verification tests.
文摘In the fabrication and monitoring of parts in composite structures,which are being used more and more in a variety of engineering applications,the prediction and fatigue failure detection in composite materials is a difficult problem.This difficulty arises from several factors,such as the lack of a comprehensive investigation of the fatigue failure phenomena,the lack of a well-defined fatigue damage theory used for fatigue damage prediction,and the inhomogeneity of composites because of their multiple internal borders.This study investigates the fatigue behavior of carbon fiber reinforced with epoxy(CFRE)laminated composite plates under spectrum loading utilizing a uniqueDeep LearningNetwork consisting of a convolutional neural network(CNN).Themethod includes establishing Finite Element Model(FEM)in a plate model under a spectrum fatigue loading.Then,a CNN is trained for fatigue behavior prediction.The training phase produces promising results,showing the model’s performance with 94.21%accuracy,92.63%regression,and 91.55%F-score.To evaluate the model’s reliability,a comparison is made between fatigue data from the CNN and the FEM.It was found that the error band for this comparison is less than 0.3878MPa,affirming the accuracy and reliability of the proposed technique.The proposed method results converge with available experimental results in the literature,thus,the study suggests the broad applicability of this method to other different composite structures.
基金This work is supported by National Natural Science Foundation of China(51305012)Doctoral Fund of Ministry of Education of China(20111102120011)National Natural Science Foundation of China(51375031).The writers are grateful。
文摘As the outfield load spectrum is so complicated that it cannot be used directly for test study in laboratory.This paper presents a method to determine load spectrum for high and low cycle combined fatigue of turbine mortise at elevated temperature through experimental and numerical method.First of all,the low cycle load spectrum with duration time is determined through cumulative damage rule.The rain flow counting method is applied to obtain main cycles and sub cycles,and then the stress cycle is converted into pulsation cycle(stress ratio=0)based on the S-N curve and the Goodman curve;Secondly,three groups of different amplitudes tests are established to determine the high cycle amplitude.Finally,another three groups of the high-low combined cycle fatigue(HLCCF)tests for turbine mortise of a certain type engine are carried out.The results show that the macro and micro failure modes are identical with outfield's,which verifies the accuracy of the conversion method.
基金This work was supported by the Industrial Strategic Technology Development Program(10062546,Construction database of work load and development of simulation model for tractor powertrain)funded by the Ministry of Trade,Industry&Energy(MI,Korea).
文摘The aim of this study was to analyze the effects of the planting distance and depth on the power take-off(PTO)load spectrum of a small riding-type transplanter for the optimal design of the transplanter.To measure load data during actual planting operation,a load measurement system was developed using a torque sensor,a data acquisition system,and an inverter.Field experiments were conducted at four planting distances(26 cm,35 cm,43 cm,and 80 cm)and three planting depths(85 mm,105 mm,and 136 mm)in a field with similar soil conditions.The measured load data were inverted into a load spectrum using rain-flow counting and Smith-Watson-Topper(SWT)methods.The safety factor of a transplanter according to the planting conditions was analyzed using the converted load spectrum and commercial software.The load spectrum for all planting conditions showed torque ratios similar within a high cycle region of 108 to 109.The torque ratio increased when the planting depth increased and planting distance decreased in the low cycle region under less than 108 cycles.The safety factors of the PTO driving gear and the driven gear increased as the planting distance increased at all planting depths.When the planting depth decreased at the same planting distance,the safety factor of the PTO gears increased.The results of this study might provide useful information for a transplanter PTO design considering the working load according to the various planting conditions.
基金National Natural Science Foundation of China(No.11272082)
文摘The rainflow counting method is a reasonable cyclecounting procedure for fatigue life calculation and simulation testing of structures.It defines cycles as closed stress /strain hysteresis loops.Application of the rainflow counting method requires a data processing of the loading spectrum,which consists of the elimination of non-peak value data points,load time histories adjustment and loop extraction.In the data processing of the loading spectrum,if a stress point is neither the peak nor the valley,it will be identified and eliminated from the loading spectrum.Generally,the loading process is idealized as a single peak-valley straight line.But in actually,there are polylines or nearly straight lines between peaks and valleys which can't be ignored.Therefore,in the process of eliminating such data points,it will produce error in method itself.To reduce the error produced by the traditional method itself,a new method which can well simplify the polylines in data processing of loading spectrum is proposed in this paper.Comparing with the original approximation method,the proposed method has higher precision.
文摘Sediment load estimation is generally required for study and development of water resources system. In this regard, artificial neural network (ANN) is the most widely used modeling tool especially in data-constraint regions. This research attempts to combine SSA (singular spectrum analysis) with ANN, hereafter called SSA-ANN model, with expectation to improve the accuracy of sediment load predicted by the existing ANN approach. Two different catchments located in the Lower Mekong Basin (LMB) were selected for the study and the model performance was measured by several statistical indices. In comparing with ANN, the proposed SSA-ANN model shows its better performance repeatedly in both catchments. In validation stage, SSA-ANN is superior for larger Nash-Sutcliffe Efficiency about 24% in Ban Nong Kiang catchment and 7% in Nam Mae Pun Luang catchment. Other statistical measures of SSA-ANN are better than those of ANN as well. This improvement reveals the importance of SSA which filters noise containing in the raw time series and transforms the original input data to be near normal distribution which is favorable to model simulation. This coupled model is also recommended for the prediction of other water resources variables because extra input data are not required. Only additional computation, time series decomposition, is needed. The proposed technique could be potentially used to minimize the costly operation of sediment measurement in the LMB which is relatively rich in hydrometeorological records.
基金Project 59775004 supported by National Natural Science Foundation of China
文摘Based on the platform of Matlab and the theory of digital signal processing, we propose a method in the cepstrum domain for dynamic load spectra identification of machinery. We demonstrate that the dynamic load spectra can be identified from the response signal of the system, based on cepstra. An ARMA model is built based on the harmonic retrieval by high-order spectra. The coefficients of a Green function are determined and the window width can be estimated. Finally the effectiveness of the method is validated by simulation results.
文摘风扇盘是航空发动机的重要断裂关键结构,为保障其服役安全性和可靠性,需要编制反映实际使用情况的载荷谱,用于疲劳寿命评定。基于某发动机2种任务类型的实际使用数据,进行了风扇盘单参数载荷统计分析,采用任务段分析法编制了中值转速谱;采用SWT(Smith-Watson-Topper)公式和线性累积损伤理论计算载荷谱损伤,采用DTW(Dynamic Time Warping)方法进行载荷谱相似性分析,结合TC17钛合金模拟试件成组试验,建立了基于载荷谱相似性的损伤分析方法;进行了机群风扇盘转速谱损伤计算,获得载荷谱损伤样本,拟合优度检验表明风扇盘转速谱损伤服从对数正态分布,中值转速谱损伤接近机群转速谱中值损伤,验证了编谱方法的合理性。为准确评估风扇盘安全寿命提供了重要支撑。
