期刊文献+
共找到501篇文章
< 1 2 26 >
每页显示 20 50 100
Increasing Liquid Yield and Diesel Fraction in Delayed Coking Process: Mechanism of Liquid Formation 被引量:2
1
作者 Mominou Nchare 《China Petroleum Processing & Petrochemical Technology》 SCIE CAS 2007年第3期23-27,共5页
The thermal upgrading of two residual oils tory-scale continuous delayed coking unit. The goal with different characteristics was studied in a labora- was to investigate the influence of the process vari- ables such a... The thermal upgrading of two residual oils tory-scale continuous delayed coking unit. The goal with different characteristics was studied in a labora- was to investigate the influence of the process vari- ables such as temperature, reaction time and additive on liquid yield and products distribution. A maximum liquid yield of 73% was achieved compared to 69% with the commercial unit. This yield was even increased to 75% under the effect of an additive. The fractionation of liquid oil by simulated vacuum distillation showed a high yield of diesel (46.9%), compared to 28% for the commercial unit. 展开更多
关键词 delayed coking liquid yield products distribution
在线阅读 下载PDF
RHEOLOGICAL PROPERTIES OF LIQUID CRYSTALLINE COPOLY (ρ-HYDR0XYBENZ0ATE/BISPHENOL A TEREPHTHALATE)
2
作者 王勇 吴大诚 李瑞霞 《Chinese Journal of Polymer Science》 SCIE CAS CSCD 1996年第2期97-104,共8页
Various aspects of the rheological behaviour of liquid crystalline copolyesters, i.e.,samples of copoly (p-hydroxybenzoate / bisphenol A terephthalate), were explored by usingInstron capillary rheometer. The experimen... Various aspects of the rheological behaviour of liquid crystalline copolyesters, i.e.,samples of copoly (p-hydroxybenzoate / bisphenol A terephthalate), were explored by usingInstron capillary rheometer. The experimental results indicated that the apparent viscositywas affected significantly by shear rate, melt temperature and p-hydroxybenzoate unit con-tent. The flow activation energies △E_η are in the range of 205.1 to 74.5 kJ/mol, dependingon the shear rate of 10-1000 s^(-1), at temperature 568-603K. These copolyesters exhibit ayield phenomenon in the shear flow, and the values of yield stress decrease with increasingtemperature. It is quite unusual that the extrudate of the copolyester shows the smallerswelling ratio even than unity at the lower temperature and lower shear rates. 展开更多
关键词 RHEOLOGY Copoly (p-hydroxybenzoate/bisphenol A terephthalate) liquid crystalline polymer yield stress
在线阅读 下载PDF
Application of in-house method for determinationof radium isotopes in environmental samples usingthe Liquid Scintillation counting technique
3
作者 Nik Azlin Nik Ariffin Zal Uyun Wan Mahmood Che Abd Rahim Mohamed 《Journal of Analytical Sciences, Methods and Instrumentation》 2011年第1期1-8,共8页
A method for determination of 226Ra and 228Ra in environmental samples using the α-β coincidence liquid scintillation counting (LSC) has been developed. Radium were preconcentrated from environmental samples by copr... A method for determination of 226Ra and 228Ra in environmental samples using the α-β coincidence liquid scintillation counting (LSC) has been developed. Radium were preconcentrated from environmental samples by coprecipitation with BaSO4, then purified from others radionuclide interferences using the cation column exchange (Bio-Rad AG 50 W-X4 resin with 200-400 mesh size and H+ form) and operating in warm temperature which is between 70-80oC. Then, the Ba(Ra)SO4 precipitate was filtered through the Millipore filter paper, dried and weighed to calculate chemical yield. The activity concentration of radium isotopes in mixture of liquid scintillation cocktails were measured using LSC after being stored for over 21 days to allow the growth of the progeny nuclides. The method has been validated with a certi-fied reference material supplied by the International Atomic Energy Agency and reliable results were obtained. The radiochemical yields for radium were 59% - 90% and recovery was 97% and 80% for 226Ra and 228Ra, respectively. Sixteen seawater and fish flesh samples collected in Kapar coastal water have been analyzed with the developed method. The obtained radium activity concentrations in seawater were in the range of 02.08 ± 0.82 mBq/L to 3.69 ± 1.29 mBq/L for 226Ra and 6.01 ± 3.05 mBq/L to 17.07 ± 6.62 mBq/L for 228Ra. Meanwhile, the activity concentrations of 226Ra and 228Ra in fish flesh were in the range of 11.82 ± 5.23 – 16.53 ± 6.53 Bq/kg dry wt. and 43.52 ± 16.34 – 53.57 ± 19.86 Bq/kg dry wt., respectively. 展开更多
关键词 226RA 228Ra ENVIRONMENTAL SAMPLES Chemical yield liquid Scintillation COUNTING
暂未订购
Synthesis of bis-ANS fluorescence probe in ionic liquids
4
作者 Wen Lu Liu Fa Qin Jiang +2 位作者 Jing Bao Liu Jian Cun Zhang Lei Fu 《Chinese Chemical Letters》 SCIE CAS CSCD 2009年第6期645-647,共3页
A new application of ionic liquids in the preparation of fluorescence probe 5,51-bis-8-phenylamino-l-naphthylsulfonate (bisANS) is represented. The method for the preparation of fluorescence probe bis-ANS in alkyl i... A new application of ionic liquids in the preparation of fluorescence probe 5,51-bis-8-phenylamino-l-naphthylsulfonate (bisANS) is represented. The method for the preparation of fluorescence probe bis-ANS in alkyl imidazolium cationic liquids under acidic conditions is described. The effects on reaction yields under different concentration of sodium nitrite and different ionic liquid were studied and good yields were achieved. 展开更多
关键词 Ionic liquid BIS-ANS Sodium nitrite PREPARATION yield
在线阅读 下载PDF
增施液态硅肥对设施番茄生长、产量及品质的影响 被引量:1
5
作者 夏秀波 梁潇 +4 位作者 张伟 初国栋 张焕春 王英杰 张超杰 《长江蔬菜》 2025年第6期81-84,共4页
试验以番茄和液态硅肥为材料,设3个处理,在常规施肥基础上,分别于定植时、定植后30 d、定植后60 d采用液态硅肥500倍液、1000倍液和1500倍液灌根。结果表明,液态硅肥1000倍液处理的番茄植株长势最强,植株高、茎粗和单株叶面积大,单果质... 试验以番茄和液态硅肥为材料,设3个处理,在常规施肥基础上,分别于定植时、定植后30 d、定植后60 d采用液态硅肥500倍液、1000倍液和1500倍液灌根。结果表明,液态硅肥1000倍液处理的番茄植株长势最强,植株高、茎粗和单株叶面积大,单果质量、产量最高。对各处理番茄植株的生长、产量、品质和发病率等指标采用DTOPSIS法进行综合分析,结果表明,液态硅肥1000倍液处理的Ci值最大,为0.7296,显著高于其他处理,说明在番茄根部增施液态硅肥1000倍液的效果最好。因此,在早春茬番茄生产上,推荐采用液态硅肥1000倍液灌根。 展开更多
关键词 番茄 液态硅肥 生长 品质
在线阅读 下载PDF
液体肥施用对滴灌棉田土壤无机氮素转化的影响 被引量:1
6
作者 马红红 吴湘琳 +8 位作者 蒲胜海 杨志莹 涂永峰 赵冬梅 吉丽丽 岳继生 魏建华 马兴旺 李磐 《西北农业学报》 北大核心 2025年第1期153-160,共8页
为突破氮肥利用率难以提高的瓶颈,选用液体肥替代常规肥料,旨在摸清液体肥与常规肥料施用对滴灌棉田土壤无机氮素转化的影响。2022年分别于新疆北疆8个地区(芳群农场,玛纳斯县兰州湾,昌吉市老龙河,红柳塘村,呼图壁红山村,昌吉市榆树沟,... 为突破氮肥利用率难以提高的瓶颈,选用液体肥替代常规肥料,旨在摸清液体肥与常规肥料施用对滴灌棉田土壤无机氮素转化的影响。2022年分别于新疆北疆8个地区(芳群农场,玛纳斯县兰州湾,昌吉市老龙河,红柳塘村,呼图壁红山村,昌吉市榆树沟,阜康市三工河乡,阜康市六运河)设置3个处理,分别为常规施肥、液体肥和减水10%+液体肥。结果表明,0~30 cm、30~60 cm土层土壤硝态氮、铵态氮含量为减水10%+液体肥>液体肥>常规施肥;土壤硝态氮、铵态氮含量均表现为滴头正下方明显高于距离滴头38 cm、-38 cm;单位面积液体肥较常规肥料养分投入量减少19.4 kg/667m^(2),但液体肥提供硝态氮、铵态氮高于常规肥料。可见,液体肥替代常规肥料在无机氮素转化方面起到正效应。 展开更多
关键词 液体肥 硝态氮 铵态氮 产量 棉田
在线阅读 下载PDF
A Damage-tolerant Bulk Metallic Glass at Liquid-nitrogen Temperature
7
作者 Jun Yi S.Mohsen Seifi +1 位作者 Weihua Wang John J.Lewandowski 《Journal of Materials Science & Technology》 SCIE EI CAS CSCD 2014年第6期627-630,共4页
Tensile tests and notch toughness tests were conducted on Zr61Ti2Cu25Al12 glass (ZT) at room temperature and liquid-nitrogen temperature. The tensile strength of ZT was improved from 1.63 GPa at room temperature to ... Tensile tests and notch toughness tests were conducted on Zr61Ti2Cu25Al12 glass (ZT) at room temperature and liquid-nitrogen temperature. The tensile strength of ZT was improved from 1.63 GPa at room temperature to 1.72 GPa at liquid-nitrogen temperature. Micro-notches with a root radius of 1-3μm were introduced to test the notch toughness of ZT at room temperature and liquid-nitrogen temperature. The test results revealed that the notch toughness of ZT at liquid-nitrogen temperature is comparable to that of ZT at room temperature. The combination of high yield strength and notch toughness of ZT at liquid-nitrogen temperature is comparable to that of the best cryogenic engineering materials. 展开更多
关键词 Metallic glasses yield strength Fracture toughness liquid-nitrogen temperature
原文传递
Recent progress of nuclear liquid gas phase transition 被引量:1
8
作者 MAYu-Gang SHENWen-Qing 《Nuclear Science and Techniques》 SCIE CAS CSCD 2004年第1期4-29,共26页
Recent progress on nuclear liquid gas phase transition (LGPT) has been reviewed, especially for the signals of LGPT in heavy ion collisions. These signals include the power-law charge distribution, cluster emission ra... Recent progress on nuclear liquid gas phase transition (LGPT) has been reviewed, especially for the signals of LGPT in heavy ion collisions. These signals include the power-law charge distribution, cluster emission rate, nuclear Zipf law, bimodality, the largest fluctuation of the fragments, Δ-scaling, caloric curve, phase coexis- tence diagram, critical temperature, critical exponent analysis, negative specific heat capacity and spinodal instability etc. The systematic works of the authors on experimental and theoretical LGPT are also introduced. 展开更多
关键词 核液化气相变 LGPT 重离子碰撞 临界温度 热量曲线
在线阅读 下载PDF
Mechanism from particle compaction to fluidization of liquid–solid two-phase flow
9
作者 Yue Zhang Jinchun Song +2 位作者 Lianxi Ma Liancun Zheng Minghe Liu 《Chinese Physics B》 SCIE EI CAS CSCD 2020年第1期373-377,共5页
A new model of particle yield stress including cohesive strength is proposed,which considers the friction and cohesive strength between particles.A calculation method for the fluidization process of liquid–solid two-... A new model of particle yield stress including cohesive strength is proposed,which considers the friction and cohesive strength between particles.A calculation method for the fluidization process of liquid–solid two-phase flow in compact packing state is given,and the simulation and experimental studies of fluidization process are carried out by taking the sand–water two-phase flow in the jet dredging system as an example,and the calculation method is verified. 展开更多
关键词 liquid–solid flow two-phase flow cohesive strength yield stress
原文传递
基于有效冲程新算法的功图软件设计及应用
10
作者 温后珍 陈颖 +3 位作者 吕岩 孟碧霞 张义举 李媛媛 《化工自动化及仪表》 2025年第4期580-586,共7页
油井产液量的准确计量可为油井采油工艺参数调节提供依据。传统功图量油算法大多通过计算泵功图有效冲程的方式计算产液量,但在生产实际中传统算法得到的产液量与实际产液量误差较大。因此,提出一种利用泵功图的包络矩形4个极点确定泵功... 油井产液量的准确计量可为油井采油工艺参数调节提供依据。传统功图量油算法大多通过计算泵功图有效冲程的方式计算产液量,但在生产实际中传统算法得到的产液量与实际产液量误差较大。因此,提出一种利用泵功图的包络矩形4个极点确定泵功图ABCD点进而求得泵有效冲程的新方法,并据此开发示功图量油软件系统。现场验证结果表明:油井产液量相对误差大多在10%以内,最小达到0.1%。对500口井预测产液量与实测产液量进行误差对比发现,准确率高达94.1%。 展开更多
关键词 示功图量油 数字化油田 柱塞有效冲程 功图计产 极点法
在线阅读 下载PDF
Investigation of Yield Regulation of Red Grapes on the Concentration of Some Crucial Wine Components
11
作者 Kinga K. Rácz Miklós Kállay +2 位作者 Nóra Bakos-Barczi László Rácz Csaba Csutorás 《Agricultural Sciences》 2016年第4期279-286,共8页
An essential concept of making quality wine is that the quality comes from the vineyard. The dissolved materials and components determine the value of wine. Their amount and proportion are essentially influenced by gr... An essential concept of making quality wine is that the quality comes from the vineyard. The dissolved materials and components determine the value of wine. Their amount and proportion are essentially influenced by grape variety, terroir, the way of cultivation, weather conditions, grape quality, the time of vintage and the method of grape and wine processing. In the present study the effect on wine quality of different ways of yield regulations was examined in wines of three consecutive years. Besides basic parameters, total polyphenol and resveratrol contents were determined in wines of Blaufr?nkisch and Merlot varieties. Our measurements were carried out by spectrophotometry, gas and liquid chromatography. Our investigations confirmed that yield regulation led to increased extract content and outstanding quality of the produced wine. 展开更多
关键词 yield Regulation POLYPHENOL RESVERATROL Gas Chromatography liquid Chromatography
在线阅读 下载PDF
菌糠浸提液与园试配方协同对水培生菜生长的影响
12
作者 罗爱华 李文甲 米彩霞 《山西农业科学》 2025年第4期100-108,共9页
为提高菌糠的利用率,探讨菌糠浸提液作为一种液体肥在蔬菜上的应用价值,以减少蔬菜生产中化肥的施用量,进而将菌糠消毒浸提制备成浸提液与日本园试配方协同作为液体肥在水培生菜上进行应用。试验选用宁夏地区常见的3种食用菌灵芝、香菇... 为提高菌糠的利用率,探讨菌糠浸提液作为一种液体肥在蔬菜上的应用价值,以减少蔬菜生产中化肥的施用量,进而将菌糠消毒浸提制备成浸提液与日本园试配方协同作为液体肥在水培生菜上进行应用。试验选用宁夏地区常见的3种食用菌灵芝、香菇、木耳的菌糠,使用煎煮法浸提制备浸提液,设置菌糠种类(A)、浸提液浓度(B)、园试配方剂量(C)3个因素,采用3因素3水平L_(9)(3^(4))正交试验设计,研究菌糠浸提液与园试配方作为营养液对水培生菜生长的影响。结果表明,影响生菜产量的主次顺序是菌糠种类(A)>园试配方剂量(C)>浸提液浓度(B)。灵芝、香菇、木耳菌糠浸提液对水培生菜产量、叶绿素含量的提高均有明显的促进作用,其中,以香菇菌糠表现最好,筛选的最优组合处理是A2B3C1,即在园试配方1/8剂量基础上,添加3%的香菇浸提液,水培生菜产量可以提高204.71%,叶绿素总含量增加230.02%。香菇菌糠浸提液协同园试配方,可以作为无土栽培水培有效的液体肥。 展开更多
关键词 菌糠 浸提液 园试配方 生菜 水培 液体肥 产量 叶绿素含量
在线阅读 下载PDF
液态地膜对番茄产量的影响
13
作者 李丹丹 杨浩瑜 +1 位作者 武晓燕 秦洁 《农业技术与装备》 2025年第2期131-133,共3页
为了了解液态地膜在番茄种植过程中的效果,设置液态地膜处理组和对照无处理组,对比探讨液态地膜对番茄种植过程中土壤温湿度及番茄产量的影响。结果表明,液态地膜处理组的土壤温湿度优于对照无处理组,液态地膜处理组的番茄产量显著高于... 为了了解液态地膜在番茄种植过程中的效果,设置液态地膜处理组和对照无处理组,对比探讨液态地膜对番茄种植过程中土壤温湿度及番茄产量的影响。结果表明,液态地膜处理组的土壤温湿度优于对照无处理组,液态地膜处理组的番茄产量显著高于对照无处理组,产量提高了17.52%,从经济效益验证了液态地膜覆盖的可行性,具有一定的推广意义。 展开更多
关键词 液态地膜 番茄 土壤保温 土壤保湿 产量
在线阅读 下载PDF
用于人工窖泥生产发酵的己酸菌液培养条件优化
14
作者 张敏丹 邓有辉 +7 位作者 申鹏森 刘小刚 廖苇 倪斌 李红梅 贾俊杰 敖灵 敖宗华 《中国酿造》 北大核心 2025年第1期191-196,共6页
为了获得高产己酸的菌液,该研究以己酸产量为评价指标,通过单因素试验及Box-Behnken试验对己酸菌液培养条件进行优化。结果表明,己酸菌液的最佳培养条件为无水乙酸钠8.0 g/L,酵母浸粉1.5 g/L,乙醇添加量2%,初始pH 7,发酵温度36℃,发酵时... 为了获得高产己酸的菌液,该研究以己酸产量为评价指标,通过单因素试验及Box-Behnken试验对己酸菌液培养条件进行优化。结果表明,己酸菌液的最佳培养条件为无水乙酸钠8.0 g/L,酵母浸粉1.5 g/L,乙醇添加量2%,初始pH 7,发酵温度36℃,发酵时间7 d。在此优化条件下,己酸产量能达到4.9 g/L,是优化前的1.40倍。 展开更多
关键词 人工窖泥 己酸菌液 己酸产量 响应面法
在线阅读 下载PDF
催化裂化装置催化剂粒径分布对产品分布影响分析 被引量:1
15
作者 柳召永 王艳飞 +1 位作者 刘涛 高雄厚 《炼油技术与工程》 2025年第1期49-51,共3页
对不同粒径分布的催化剂进行催化裂化反应性能评价,考察了催化剂粒径分布对产品分布的影响。结果表明:(1)对于同一粒径分布的催化剂而言,随着剂油比的增加,干气收率的增加并不显著,转化率先明显增加后增加趋势趋于平缓,重油收率逐渐减少... 对不同粒径分布的催化剂进行催化裂化反应性能评价,考察了催化剂粒径分布对产品分布的影响。结果表明:(1)对于同一粒径分布的催化剂而言,随着剂油比的增加,干气收率的增加并不显著,转化率先明显增加后增加趋势趋于平缓,重油收率逐渐减少,焦炭收率逐渐增加,汽油收率的变化趋势各有不同;(2)对于中位粒径为43.71μm的催化剂而言,剂油比达到6时,总液体收率最高,产品分布最优。催化剂的粒径分布对产品分布和催化剂流化性能有明显影响。粒径40μm的催化剂的流化性能较差,需引起重视。 展开更多
关键词 催化裂化装置 催化剂 粒径分布 产品分布 剂油比 轻油收率 总液体收率 转化率
在线阅读 下载PDF
蚯蚓有机液肥对草莓生长的效果研究
16
作者 陈燕华 孙莲 +3 位作者 陆雁 胡亮 李方勇 韩科峰 《浙江农业科学》 2025年第5期1087-1090,共4页
为进一步探究蚯蚓液肥对草莓生长的影响,筛选出适合草莓绿色生产的施肥配方,笔者在象山县东陈乡大塔村开展了田间试验。结果表明:T2处理草莓采收期最早,较CK处理提早了9 d,且T2处理草莓的产量最高,为23391 kg·hm^(-2),比CK增产4726... 为进一步探究蚯蚓液肥对草莓生长的影响,筛选出适合草莓绿色生产的施肥配方,笔者在象山县东陈乡大塔村开展了田间试验。结果表明:T2处理草莓采收期最早,较CK处理提早了9 d,且T2处理草莓的产量最高,为23391 kg·hm^(-2),比CK增产4726 kg·hm^(-2),增幅为25.3%,经济效益最显著。相较于CK,T2处理的平均单果重、可溶性固形物含量、果实硬度和总酸含量均达到了显著性差异(P<0.05),分别为20.43 g、9.8%、273.12 kg·cm^(-2)和6.59 g·kg^(-1),分别提高了21.0%、1.4百分点、11.4%和32.3%。 展开更多
关键词 草莓 蚯蚓有机液肥 产量 品质
在线阅读 下载PDF
复杂流体屈服应力的测定:理论、方法及应用 被引量:1
17
作者 徐家通 周子愉 +1 位作者 廖晴雨 张洪斌 《高分子通报》 北大核心 2025年第5期689-717,共29页
多相多组分复杂流体,因其独特的流变学性质在科学研究和工业应用中占有重要地位。很多高分子的溶液、乳液、悬浮液、凝胶、填充体系等,都是典型的具有屈服行为的复杂流体,也称屈服应力流体。屈服应力是描述这类流体发生固-液转变时的最... 多相多组分复杂流体,因其独特的流变学性质在科学研究和工业应用中占有重要地位。很多高分子的溶液、乳液、悬浮液、凝胶、填充体系等,都是典型的具有屈服行为的复杂流体,也称屈服应力流体。屈服应力是描述这类流体发生固-液转变时的最关键参数,对于理解其流变行为、加工和应用至关重要。尽管屈服应力的研究历史已经有数十年,但迄今仍有许多焦点问题有待解决和深入研究。屈服应力测定的理论、方法和应用场景一直处于不断发展中。特别是对于时间依赖的触变性屈服应力流体,其聚集态形式、热历史及剪切历史均在很大程度上影响其屈服应力的大小,对这类流体屈服应力的准确测定从理论到测试方法都充满挑战。本文综述了屈服应力流体的类别和屈服的形成机制,对现有各类流变模型以及测试方法进行了详细对比分析,还介绍了基于大振幅振荡剪切的应力分叉法和代数应力分叉法这2种屈服应力测定新方法以及二次屈服,着重指出了屈服应力测试中应考虑的科学性、合理性以及时间尺度问题。 展开更多
关键词 屈服应力 触变性 固-液转变 大振幅振荡剪切 复杂流体
原文传递
提高超重力油浆脱固工艺液体收率的方案研究
18
作者 贺安新 赵福利 +2 位作者 闵正红 侯俊毅 古亚坤 《石油炼制与化工》 北大核心 2025年第2期59-64,共6页
液体收率是油浆脱固装置的重要指标,直接关系到经济效益和高灰分组分后处理的难度。超重力分离机采用定期排渣的方式将高灰分的渣浆排出,以保证装置稳定运行。为提高油浆脱固过程的液体收率,通过研究产品油浆灰分变化考察了排渣周期、... 液体收率是油浆脱固装置的重要指标,直接关系到经济效益和高灰分组分后处理的难度。超重力分离机采用定期排渣的方式将高灰分的渣浆排出,以保证装置稳定运行。为提高油浆脱固过程的液体收率,通过研究产品油浆灰分变化考察了排渣周期、进料流量和油相阻垢剂对排渣量的影响。试验结果表明:超重力分离机排渣周期越长,液体收率越高,但每处理0.4 t油浆必须进行一次排渣,否则将影响装置稳定性;通过加入油相阻垢剂,可有效减轻渣浆在设备内黏附,从而有助于渣浆排出;在油相阻垢剂加剂量(w)为100μg g的情况下,排渣周期可延长66.7%,液体收率提高到96.07%,具有较好的经济效益,且不会影响油浆后续利用。 展开更多
关键词 超重力分离机 油浆脱固 液体收率 灰分 渣浆 阻垢剂
在线阅读 下载PDF
不同种植方式对土壤水热及马铃薯产量的影响 被引量:1
19
作者 王平 陈娟 +2 位作者 王镭 刘善霞 胡建萍 《中国瓜菜》 北大核心 2025年第10期148-155,共8页
以马铃薯品种冀张薯12号为供试材料,采用随机区组设计,研究了滴灌(W)与无灌溉(D)条件下3种覆盖方式[黑色地膜垄作覆盖(F)、喷液态膜垄作(Y)、露地垄作(L)]对土壤水热、马铃薯生长及产量的影响,分析滴灌条件下马铃薯的增产潜力,确定马铃... 以马铃薯品种冀张薯12号为供试材料,采用随机区组设计,研究了滴灌(W)与无灌溉(D)条件下3种覆盖方式[黑色地膜垄作覆盖(F)、喷液态膜垄作(Y)、露地垄作(L)]对土壤水热、马铃薯生长及产量的影响,分析滴灌条件下马铃薯的增产潜力,确定马铃薯的最佳种植方式。结果表明,不同种植方式下,滴灌与覆膜均能使马铃薯物候期提前,滴灌与不灌水相比,成熟期提前6~9 d。与传统露地种植相比,覆黑色地膜和液态膜可分别使马铃薯提早出苗15 d和2 d,成熟期提前2~7 d。与露地栽培相比,覆膜具有显著的增温保湿效果,且黑色地膜效果最优。马铃薯株高、茎粗、叶面积指数、SPAD值、单株结薯数、产量之间均呈极显著正相关,种植方式对马铃薯的生长影响显著,与D处理相比,W处理的平均马铃薯大薯数、产量与商品薯率分别显著提高109.74%、138.47%、145.95%,与L处理相比,F与Y处理分别增产42.65%~67.28%、11.34%~14.83%。综上,滴灌处理下覆黑色地膜与液态膜具有增温与抗旱保墒的作用,能够促进马铃薯出苗与成熟,其中覆黑色地膜滴灌(WF)处理在促进马铃薯植株生长和提高产量方面效果最优,是适合在旱作区推广应用的马铃薯种植模式。 展开更多
关键词 马铃薯 旱作区 液态膜 膜下滴灌 土壤水热 产量
在线阅读 下载PDF
新型气液分离式特低产液井油流量仪在油田中的应用
20
作者 张译文 《石油石化节能与计量》 2025年第6期39-43,共5页
为了增强集流伞的耐磨性,克服低产液测试、涡轮流量计砂卡的难题,以高性能涤纶防水伞布代替普通防水伞布、基于阵列传感器技术测量油流量的新型气液分离式特低产液井油流量仪,采用热式流量计解决涡轮流量计砂卡和低产液测试难题。通过... 为了增强集流伞的耐磨性,克服低产液测试、涡轮流量计砂卡的难题,以高性能涤纶防水伞布代替普通防水伞布、基于阵列传感器技术测量油流量的新型气液分离式特低产液井油流量仪,采用热式流量计解决涡轮流量计砂卡和低产液测试难题。通过分析测试数据,给出了定性或定量的分析结果。新型气液分离式特低产液井油流量仪适用于总产液量小于10 m^(3)/d、产油量小于5 m^(3)/d偏心抽油机井,油流量最低限可达到0.01 m^(3)/d,产液量可达到0.2 m^(3)/d。新型气液分离式特低产液井油流量测井仪油流量、产液测量下限低,该技术的大规模应用将推动我国低渗透油气藏开发效率提升30%以上。 展开更多
关键词 油流量仪 低产液井 砂卡 集流伞 热式流量计
在线阅读 下载PDF
上一页 1 2 26 下一页 到第
使用帮助 返回顶部