Effects of Mn content on the hydrogen-induced amorphization of LaNi3-xMnx(x=0.0,0.1,0.3 and 0.5) hydrogen storage alloys were studied systematically.All the alloys were prepared using a rapid quenching and annealing m...Effects of Mn content on the hydrogen-induced amorphization of LaNi3-xMnx(x=0.0,0.1,0.3 and 0.5) hydrogen storage alloys were studied systematically.All the alloys were prepared using a rapid quenching and annealing method.As the charging time increased,the hydrogen-induced amorphization occurred gradually in all the compounds for the first cycle.During the discharge process,discharge potential plateau was not observed in LaNi3.As Mn content increased,however,structural changes were inhibited partly,and a p...展开更多
In order to develop the new cathode materials suitable for intermediate and low temperature solid oxide fuel cells (IT/LTSOFCs), LaNi1-xFexO3 (x=0.4-0.8) (LNF) materials were synthesized using coprecipitation method. ...In order to develop the new cathode materials suitable for intermediate and low temperature solid oxide fuel cells (IT/LTSOFCs), LaNi1-xFexO3 (x=0.4-0.8) (LNF) materials were synthesized using coprecipitation method. Their structures and morphologies were investigated by XRD and SEM, and their electronic conductivities at different temperatures were measured by dc four terminal method. Fuel cells were fabricated to evaluate the electrochemical properties of the LNF materials as cathodes at different temperatures. The performance of 450-497 mW·cm-2 was obtained in the temperature region of 580-650 ℃ for the LaNi0.2Fe0.8O3 cathode, and of 209-227 mW·cm-2 at 400-500 ℃ for the LaNi0.4Fe0.6O3. The excellent fuel cell performances indicate that the LNF materials are good cathodes for IT/LTSOFCs.展开更多
LaNi（0.6）Fe（0.4）O（3-δ） （LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infil...LaNi（0.6）Fe（0.4）O（3-δ） （LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infiltration from LNF porous backbones. Electrochemical properties and Cr-poisoning behavior of LNF-GDC cathodes were studied. Single phase perovskite LNF could be obtained at the glycine to nitrate molar ratio of 1：1. The polarization resistance of the LNF-GDC nanocomposite cathode was significantly decreased in comparison with the LNF. This phenomenon was associated with enhanced catalytic activity and enlarged triple-phase boundary （TPB） length by GDC nano particles. In addition, the nanocomposite cathode showed good Cr tolerance under open circuit condition. The LNF-GDC nanocomposite cathodes were expected for use as a potential cathode in intermediate- temperature solid oxide fuel cells （IT-SOFC）.展开更多
文摘Effects of Mn content on the hydrogen-induced amorphization of LaNi3-xMnx(x=0.0,0.1,0.3 and 0.5) hydrogen storage alloys were studied systematically.All the alloys were prepared using a rapid quenching and annealing method.As the charging time increased,the hydrogen-induced amorphization occurred gradually in all the compounds for the first cycle.During the discharge process,discharge potential plateau was not observed in LaNi3.As Mn content increased,however,structural changes were inhibited partly,and a p...
文摘In order to develop the new cathode materials suitable for intermediate and low temperature solid oxide fuel cells (IT/LTSOFCs), LaNi1-xFexO3 (x=0.4-0.8) (LNF) materials were synthesized using coprecipitation method. Their structures and morphologies were investigated by XRD and SEM, and their electronic conductivities at different temperatures were measured by dc four terminal method. Fuel cells were fabricated to evaluate the electrochemical properties of the LNF materials as cathodes at different temperatures. The performance of 450-497 mW·cm-2 was obtained in the temperature region of 580-650 ℃ for the LaNi0.2Fe0.8O3 cathode, and of 209-227 mW·cm-2 at 400-500 ℃ for the LaNi0.4Fe0.6O3. The excellent fuel cell performances indicate that the LNF materials are good cathodes for IT/LTSOFCs.
基金supported by a grant from the Fundamental R&D Program for Core Technology of Materials (No.10051006)funded by the Ministry of Knowledge Economy, Republic of Koreasupported by the New & Renewable Energy Core Technology Program of the Korea Institute of Energy Technology Evaluation and Planning (KETEP), granted financial resource from the Ministry of Trade, Industry & Energy, Republic of Korea (No. 20113020030050)
文摘LaNi（0.6）Fe（0.4）O（3-δ） （LNF） powders were synthesized by the glycine-nitrate process and LNF-gadolinium-doped ceria （GDC） nanocomposite cathodes for solid oxide fuel cells （SOFCs） were fabricated by infiltration from LNF porous backbones. Electrochemical properties and Cr-poisoning behavior of LNF-GDC cathodes were studied. Single phase perovskite LNF could be obtained at the glycine to nitrate molar ratio of 1：1. The polarization resistance of the LNF-GDC nanocomposite cathode was significantly decreased in comparison with the LNF. This phenomenon was associated with enhanced catalytic activity and enlarged triple-phase boundary （TPB） length by GDC nano particles. In addition, the nanocomposite cathode showed good Cr tolerance under open circuit condition. The LNF-GDC nanocomposite cathodes were expected for use as a potential cathode in intermediate- temperature solid oxide fuel cells （IT-SOFC）.
