The Mg-1Gd-0.75Er-0.5Zn-0.18Zr(at.%)alloy with long-period stacking ordered(LPSO)phase was prepared by metal mold casting and hot extrusion.The extruded samples had a typical bimodal microstructure.The different fract...The Mg-1Gd-0.75Er-0.5Zn-0.18Zr(at.%)alloy with long-period stacking ordered(LPSO)phase was prepared by metal mold casting and hot extrusion.The extruded samples had a typical bimodal microstructure.The different fractions of equiaxed grains were observed in annealed samples.The percentage of fine grains decreased in the extruded Mg alloys with and without annealing treatment when the extrusion temperature was increased.The LPSO phases promote recrystal-lization behavior in the samples through particle-stimulated nucleation(PSN)mechanism.The Mg alloys extruded at 300℃ with or without annealing treatment obtained the best tensile properties.At the low extrusion temperature,more finely equiaxed grains with random texture are formed through PSN,and more LPSO phase kink bands are formed,which could improve the mechanical properties of the extruded Mg alloys.展开更多
The homogenized Mg−5.6Gd−0.8Zn(wt.%)alloys were treated with water cooling and furnace cooling to obtain specimens without and with the 14H long-period stacking ordered(LPSO)phase.Subsequently,multi-directional forgin...The homogenized Mg−5.6Gd−0.8Zn(wt.%)alloys were treated with water cooling and furnace cooling to obtain specimens without and with the 14H long-period stacking ordered(LPSO)phase.Subsequently,multi-directional forging(MDF)experiments were carried out.The microstructure and mechanical properties of different regions(the center,middle and edge regions)in the MDFed alloys were systematically investigated,and the effect of LPSO phase on them was discussed.The results show that the alloys in different regions undergo significant grain refinement during the MDF process.Inhomogeneous microstructures with different degrees of dynamic recrystallization(DRX)are formed,resulting in microhardness heterogeneity.The alloy with the LPSO phase has higher microstructure homogeneity,a higher degree of recrystallization,and better comprehensive mechanical properties than the alloy without the LPSO phase.The furnace-cooled alloy after 18 passes of MDF has the best comprehensive mechanical properties,with an ultimate compressive strength of 488 MPa,yield strength of 258 MPa,and fracture strain of 21.2%.DRX behavior is closely related to the LPSO phase and deformation temperature.The kinked LPSO phase can act as a potential nucleation site for DRX grains,while the fragmented LPSO phase promotes DRX nucleation through the particle-stimulated nucleation mechanism.展开更多
This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period ...This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period stacked ordered(LPSO)phase in the two alloys during heat treatment was the focus.The morphology of the as-cast Mg_(95.34)Ni_(2)Y_(2.66)presented a disordered network.After heat treatment at 773 K for 2 hours,the eutectic phase was integrated into the matrix,and the LPSO phase maintained the 18R structure.As Zn partially replaced Ni,the crystal grains became rounded in the cast alloy,and lamellar LPSO phases and more solid solution atoms were contained in the matrix after heat treatment of the Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloy.Both Zn and the heat treatment had a significant effect on damping.Obvious dislocation internal friction peaks and grain boundary internal friction peaks were found after temperature-dependent damping of the Mg_(95.34)Ni_(2)Y_(2.66)and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys.After heat treatment,the dislocation peak was significantly increased,especially in the alloy Mg_(95.34)Ni_(2)Y_(2).66.The annealed Mg_(95.34)Ni_(2)Y_(2.66)alloy with a rod-shaped LPSO phase exhibited a good damping performance of 0.14 atε=10^(−3),which was due to the difference between the second phase and solid solution atom content.These factors also affected the dynamic modulus of the alloy.The results of this study will help in further development of high-damping magnesium alloys.展开更多
The LPSO phase can effectively enhance the mechanical properties of Mg alloys.To investigate the impact of different LPSO phase contents and morphologies on the mechanical properties and strengthening mechanisms of Mg...The LPSO phase can effectively enhance the mechanical properties of Mg alloys.To investigate the impact of different LPSO phase contents and morphologies on the mechanical properties and strengthening mechanisms of Mg-Y-Al alloys under room temperature deformation,this study prepared Mg-12Y-1Al(WA121)alloys containing Bulk-LPSO(B-LPSO),Lattice-LPSO(L-LPSO),and Needle-like LPSO(N-LPSO)with different contents through different heat-treatment processes.The results indicate that with the increase in heat treatment time,the contents of B-LPSO phases remain essentially unchanged,and the contents of L-LPSO and N-LPSO phases gradually increase.The increase in N-LPSO phase content is the most pronounced,with the highest content(7.29%)observed in the alloy treated for 4.5 h.Moreover,the alloy treated for 4.5 h exhibits the best mechanical properties,with ultimate tensile strength(UTS),tensile yield strength(TYS),and elongation(EL)values of 177 MPa,139 MPa,and 4.27%,respectively.Compared to the as-cast alloy,UTS,TYS,and EL increased by 9.94%,11.2%,and 27.1%,respectively.The study reveals that all three LPSO phases exhibit excellent dislocation hindering effects,effectively enhancing strength of the alloy.Additionally,the N-LPSO phase,due to its dense distribution,forms numerous dislocation channels within the grains,dispersing stress concentration within the grains to improve plasticity of the alloy.Furthermore,the interaction between the N-LPSO phase and the other phases in the alloy can also enhance plasticity of the alloy.Therefore,the alloy treated for 4.5 h demonstrates a synergistic improvement in strength and plasticity.Research has revealed that the precipitation mechanism of the N-LPSO phase in the as-cast WA121 alloy involves the formation of an Al-rich region adjacent to the needle-like Mg_(24)Y_(5) phase.Subsequently,the Y element provided by the dissolving Mg_(24)Y_(5) phase reacts with this region,ultimately leading to the formation of the needle-like LPSO phase.展开更多
The heterostructure preparation in Mg-rare earth(RE)alloy has attracted much attention due to the excellent enhancement of strength and ductility.However,the effect of heterostructure composition on mechanical propert...The heterostructure preparation in Mg-rare earth(RE)alloy has attracted much attention due to the excellent enhancement of strength and ductility.However,the effect of heterostructure composition on mechanical properties in Mg-RE alloy is still not clear.In this work,three types of heterostructures with different composition induced by lamellar 14H long period stacking ordered(LPSO)phase were achieved in the Mg-Gd-Y-Zn-Zr alloys after cyclic extrusion and compression(CEC).The heterostructure was mainly composed of dynamic recrystallization(DRX)grains,deformed coarse grains,multiscale LPSO phase(blocky,granular,lamellar LPSO phase).The strength and ductility of Mg-Gd-Y-Zn-Zr alloy with heterostructure were simultaneously improved.The DRX behavior during CEC process was largely affected by the lamellar LPSO phase.The lamellar LPSO with large spacing(∼92 nm)and low thickness(∼13.46 nm)is easy to occur kinking behavior and the zigzag kinking area can serve as nucleation sites to promote DRX behavior.While the lamellar LPSO phase with high thickness(∼23.41 nm)and similar spacing(∼82 nm)was ruptured into granular LPSO phase and thus increase the volume fraction of granular LPSO phase,which made a great contribution to DRX behavior by particle stimulated nucleation.The main deformation mechanism of solution treatment+furnace cooling(SF)sample during CEC process is dominated by the multiple slips composed of basal slips,prismatic slips and pyramidal slips.For the solution treatment+air cooling(SA)sample and solution treatment+ageing treatment(ST)sample,the activation of basal slips is the critical deformation mechanism.The main contribution to yield strength is from the grain boundary,dislocation and hetero-deformation induced(HDI)strengthening.Moreover,the HDI strengthening in the SF and SA sample after CEC deformation is much larger than that of ST sample due to the distinct heterostructure composition.展开更多
A yield phenomenon was firstly reported in an extruded Mg-6.8Y-2.5Cu alloy and the corresponding microstructure was also investigated in this work,The cast alloy is mainly composed ofα-Mg,18R long period stacking ord...A yield phenomenon was firstly reported in an extruded Mg-6.8Y-2.5Cu alloy and the corresponding microstructure was also investigated in this work,The cast alloy is mainly composed ofα-Mg,18R long period stacking order(LPSO)phase,eutectic phase(Mg_(20)Cu_(4)Y_(1)),and Mg_(2)Cu phase.The 18R LPSO phase at the dendritic grain boundary transforms into the 14H LPSO phase in the grain interior during homogenization.After extrusion,the grain size of the homogenized alloy is remarkably refined to-3.69μm and the second phase is significantly broken and distributed in the extrusion direction.Tensile testing curves of the extrude alloy at room temperature indicate that the yield strength and ultimate tensile strength increase while the elongation of the alloy decreases with increasing strain rate.Interestingly,a yield plateau fo rms and gradually decreases with increasing strain rate.The yield phenomenon is related to the dislocation multiplication and the interaction between the movable dislocations and solute atoms.展开更多
Although variant selection during the phase transformation of zirconium(Zr)alloys has been studied extensively,studies on the formation mechanism of microstructural characteristics related to a variant selection remai...Although variant selection during the phase transformation of zirconium(Zr)alloys has been studied extensively,studies on the formation mechanism of microstructural characteristics related to a variant selection remain limited.The formation mechanisms of the self-accommodation morphology and inter-variant boundary characteristics of a variants in homogenized Zr-2.5Nb alloy cooled by water quenching(WQ),furnace cooling(FC),and air cooling(AC)were systematically investigated from the perspective of local strain during phase transformation.The a variants exhibited triangular morphologies in both the WQ and AC samples,and a colony morphology in the FC sample.Further,there were five types of inter-variant boundaries:TypeI<0001>/10.53°,Typell<1120>/60°,Type Ill<1.377 I 2.3770.359>/60.83°,Type IV<10553>/63.26°,and Type V<12.381.380>/90°.The proportion of Type ll is up to 98%in the AC sample and 57.9%in the WQ sample;the Type I was very low in all three samples;and a high proportion of the Type V was observed in the FC sample(23.6%).The self-accommodation morphology of a variants is closely related to the equivalent strain(Evm)during the variant selection.Theoretical calculations indicated that,for a specific 2-variant combinations,there were always one or more 3-variant combinations with a lower Evm than the 2-variant combinations.A lower eym contributes to the presence of 3-variant combinations,which forms a triangle morphology.The formation of inter-variant boundaries is determined by the type and frequency of variants as well as the eym of the 2-variant combinations.The order of the mean values of evm for the five types of boundaries was Type II(0.0757),Type III(0.0859),Type IV(0.1012),Type V(0.1112),and Type I(0.1307).That is,Type II is the easiest and Type I is the most difficult,which resulted in a very high fraction of Type ll and a very low fraction of Type I in the WQ,AC,and FC samples.The presence of a high fraction of Type V in the FC sample was related to the type and fraction of each variant.展开更多
This study was aimed at identifying underlying strengthening mechanisms and predicting the yield strength of as-extruded Mg-Zn-Y alloys with varying amounts of yttrium （Y） element. The addition of Y resulted in the ...This study was aimed at identifying underlying strengthening mechanisms and predicting the yield strength of as-extruded Mg-Zn-Y alloys with varying amounts of yttrium （Y） element. The addition of Y resulted in the formation of ternary 1 （Mg3YZn6）, W （Mg3Y2Zn3） and LPSO （Mg12YZn） phases which subse- quently reinforced alloys ZM31 ＋ 0.3Y, ZM31 ＋ 3.2Y and ZM31 ＋ 6Y, where the value denoted the amount of Y element （in wt%）. Yield strength of the alloys was determined via uniaxial compression testing, and grain size and second-phase particles were characterized using OM and SEM. In-situ high-temperature XRD was performed to determine the coefficient of thermal expansion （CTE）, which was derived to be 1.38 x 10^-5 K^-1 and 2.35 x 10^-5 K^-1 for W and LPSO phases, respectively. The individual strengthening effects in each material were quantified for the first time, including grain refinement, Orowan looping, thermal mismatch, dislocation density, load-bearing, and particle shearing contributions. Grain refinement was one of the major strengthening mechanisms and it was present in all the alloys studied, irrespective of the second-phase particles. Orowan looping and crE mismatch were the predominant strengthening mechanisms in the ZM31＋0.3Y and ZM31 ＋ 3.2Y alloys containing I and W phases, respectively, while load-bearing and second-phase shearing were the salient mechanisms contributing largely to the superior yield strength of the LPSO-reinforced ZM31 ＋ 6Y alloy.2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.展开更多
Effects of chemical compositions, finish rolling temperature, isothermal temperature on runout table and coiling temperature on microstructure and mechanical properties of economical dual phase steel produced on CSP l...Effects of chemical compositions, finish rolling temperature, isothermal temperature on runout table and coiling temperature on microstructure and mechanical properties of economical dual phase steel produced on CSP line were investigated. Experimental results showed that martensite volume fraction could be enhanced and banding mi- crostructure could be reduced by controlling Mn, Si contents and applying proper finish rolling temperature. Opti- mized processing-parameters were obtained for DP580 production on CSP line of Wuhan Iron and Steel （group） Co （WISCO） in China. Optimal mierostructure and mechanical properties could be achieved when the strip was finished rolling at the range of 790 to 830 ~C, isothermally holding at 680 to 740 ~C and coiling below 250 ~C.展开更多
The influence of mischmetal （Ce-La） addition on phase transformation and as-cast microstructure characteristics of M2 high-speed steel （HSS） was investigated using Thermo-Calc software, differential scanning calor...The influence of mischmetal （Ce-La） addition on phase transformation and as-cast microstructure characteristics of M2 high-speed steel （HSS） was investigated using Thermo-Calc software, differential scanning calorimetry, X-ray diffractometry and scanning electron microscopy with energy dispersive spectrometry. The results showed that the measured phase transition points of M2 HSS were broadly consistent with the theoretical results. After mischmetal addition, the liquidus peak temperature, the peak temperature of the eutectic precipitation of M6C and MC were all increased, especially for the M6C which was affected significantly and increased about 31 °C. The contents of Mo and V in the eutectic carbide decreased and that of Fe increased, while in the matrix, the Mo, V and Cr contents all increased slightly. Furthermore, the microstructure of as-cast dendrite and ledeburite were refined, the total eutectic carbide content decreased and distributed into a discontinuous network, the lamellar spacing of M2C was reduced and the lamellae became thinner.展开更多
The homogenized Mg-8.2 Gd-3.8 Y-1.0 Zn-0.4 Zr(wt.%)alloy full of plate-shaped long period stacking ordered(LPSO)phases was hot extruded in the atmosphere and cooled by the forced-air,then the effect of forced-air cool...The homogenized Mg-8.2 Gd-3.8 Y-1.0 Zn-0.4 Zr(wt.%)alloy full of plate-shaped long period stacking ordered(LPSO)phases was hot extruded in the atmosphere and cooled by the forced-air,then the effect of forced-air cooling on the microstructure and age-hardening response of the alloy was investigated in this work.The results show that in comparison with the extruded sample cooling in the atmosphere,the forced-air cooling restricts dynamic recrystallization(DRX)and brings about finer dynamic recrystallized(DRXed)grain size,stronger basal texture and higher dislocation density.Furthermore,the forced-air cooling promotes the dynamic precipitation in the DRXed regions and facilitates formation of plate-shaped LPSO phases andγ’phases with smaller interspacing in the unrecrystallized(un DRXed)regions,then slightly restricts the precipitation ofβphases during aging.After peak-ageing treatment,the extruded sample with forced-air cooling shows superior tensile properties with a tensile yield strength of 439 MPa,an ultimate tensile strength of 493 MPa,and elongation to failure of 18.6%.展开更多
In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order...In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order(LPSO)phase was firstly introduced to improve both the mechanical properties and degradation rate of magnesium alloys.With the increase of LPSO phase,the compressive strength was improved significantly,while the elongation of the alloys decreased owing to the relatively brittle nature of LPSO phase.Due to the higher corrosion potential of LPSO phase,the LPSO phase can accelerate the corrosion process by providing more micro-couples.However,the LPSO phase would serve as the corrosion barrier between the corrosion medium and the matrix when the contents of LPSO phase are too high in Mg92.5Ni3Y4.5 and Mg87.5Ni5Y7.5 alloys.As-cast Mg97.5Ni1Y1.5 alloy with satisfactory mechanical properties and rapid degradation rate was successfully developed,exhibiting a high degradation rate of 6675 mm/a(93℃)in 3 wt.%KCl solution and a favorable ultimate compressive strength of 410 MPa.The degradation rate of Mg97.5Ni1Y1.5 alloy is 2-5 times of the current commercial magnesium alloy fracturing materials.展开更多
Featured initial microstructures of Mg-11Gd-4Y-2Zn-0.5Zr alloy(wt%) were obtained by adjusting temperatures of solid solution and cooling methods, including island intergranular 18R and 14H LPSO phases with low-densit...Featured initial microstructures of Mg-11Gd-4Y-2Zn-0.5Zr alloy(wt%) were obtained by adjusting temperatures of solid solution and cooling methods, including island intergranular 18R and 14H LPSO phases with low-density stacking faults, differentially spaced lamellar intragranular 14H-LPSO phases, and network intergranular 18R-LPSO phases with high-density intragranular stacking faults. Effects of these featured LPSO phases and stacking faults on dynamic recrystallization(DRX) behavior were investigated via hot compression. Promoted DRX behavior via particle stimulated nucleation(PSN) is introduced by coexisting intergranular island 18R and 14H LPSO phases and intragranular wide spacing lamellar 14H-LPSO phases, contributing the highest DRX fraction of 42.6%. Conversely, it is found that DRX behavior with network intergranular 18R-LPSO phases and dense intragranular stacking fault is considerably inhibited with the lowest fraction of 22.8%. That is, the restricted DRX due to dislocations pinning by stacking faults overwhelms the enhanced DRX behavior via PSN of island intergranular 18R and 14H LPSO phases. Specially, compared with dense intragranular lamellar 14H-LPSO phases, high-density stacking faults exert a larger inhibition effect on DRX behavior.展开更多
Effects of solid solution treatment and cooling on the morphology of long period stacking order(LPSO)phase and precipitation hardening behavior of Mg?2Dy?0.5Ni(molar fraction,%)alloy were investigated.Microstructures ...Effects of solid solution treatment and cooling on the morphology of long period stacking order(LPSO)phase and precipitation hardening behavior of Mg?2Dy?0.5Ni(molar fraction,%)alloy were investigated.Microstructures of the as-cast alloy mainly consisted ofα-Mg phase,bamboo-like Mg12DyNi phase with LPSO structure distributed between dendrites and small amounts of cubic Dy phases.During solid solution treatment at565oC for12h and subsequent different cooling conditions,dot-shaped,block,fine lamellar and rod-shaped LPSO phases precipitate in Mg matrix,respectively.For continuous cooling conditions(furnace and air cooling),the fine lamellar LPSO phase generally forms in grain interior and its volume fraction increases and block LPSO phase coarsens with increasing cooling time.For discontinuous cooling conditions(air cooling after furnace cooling to415and265°C),the dot-shaped LPSO grows into the rod-shaped phase,which results in an decrease of cooling hardening behavior of alloy.展开更多
The influence of solid solution treatment on the microstructure and corrosion resistance of as-cast Mg_(95.5)Zn_(1.5)Y_(3)alloy is characterized.The microstructure of the as-cast Mg_(95.5)Zn_(1.5)Y_(3)alloy mainly con...The influence of solid solution treatment on the microstructure and corrosion resistance of as-cast Mg_(95.5)Zn_(1.5)Y_(3)alloy is characterized.The microstructure of the as-cast Mg_(95.5)Zn_(1.5)Y_(3)alloy mainly consisted ofα-Mg,W(Mg_(3)Zn_(3)Y_(2))phase,and the long period stacking ordered(LPSO)(Mg_(12)ZnY)phase.After solid solution treatment,most of the W phase disappears gradually with increasing solution treatment time,with only a small amount of W phase distributed as particle.The LPSO phase slightly dissolved into substrate,and its morphology transitions from blocky shape to rod shape.Solid solution treatment of Mg_(95.5)Zn_(1.5)Y_(3)exhibits excellent corrosion resistance,because the Y and Zn atoms became enriched in the matrix and the changed morphologies of the LPSO and W phases were modified through heat treatment.The alloy created with solid solution treatment at 520℃for 10 hours exhibits corrosion potential of−1.419 V,suggesting a significant improvement in corrosion performance.展开更多
The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffracti...The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffraction technique.Tests were conducted at temperatures between room temperature and 350℃.Detailed microstructure investigation was provided by scanning electron microscopy,particularly the backscattered electron imaging and electron backscatter diffraction technique.The results show that twinning lost its dominance and kinking of the LPSO phase became more pronounced with increasing deformation temperature.No cracks of the LPSO phase and no debonding r at the interface between the LPSO phase and the Mg matrix were observed at temperatures above 200℃.At 350℃,the LPSO phase lost its strengthening effect and the deformation of the alloy was mainly realized by the dynamic recrystallization of the Mg matrix.展开更多
As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties w...As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties were investigated.Coupling the bulk LPSO phase and the lamellar γ' phase,and controlling the dynamic recrystallization processes during deformation by adjusting the volume fraction of LPSO and the density of the γ' phase,a synergistic increase in strength and degradation rate can be achieved.On the one hand,the increase in corrosion rate was related to the increased volume fraction of the bulk LPSO phase and the densities of the lamellar γ' phase,which provide more galvanic corrosion.Moreover,high densities of the lamellar γ' phase can provide more corrosion interface by inhibiting the recrystallization process to refine dynamic recrystallized(DRXed)grains during the hot extrusion.On the other hand,the ultimate tensile strength(UTS)and tensile yield strength(TYS)of the Mg-Er-Ni alloy increased from 345 and 265 MPa to 514 MPa and 358 MPa,respectively,which was mainly attributed to grain boundary and texture strengthening,bulk LPSO phase and lamellar γ' phase strengthening.Overall,Mg^(-1)4Er-4Ni alloy,which contains the highest volume fraction bulk LPSO phase and the densities of lamellar γ' phase,re-alized a synergistic enhancement of strength and degradation rate.The UTS,TYS,and degradation rate of Mg^(-1)4Er-4Ni were 514 MPa,358 MPa,and 142.5 mg cm^(-2)h^(-1)(3 wt%KCl solution at 93◦C),respectively.This research provides new insight into developing Mg alloys with high strength and degradation rates for fracturing tool materials in the application of oil and gas exploitation in harsh environments.展开更多
This study examined the mechanical properties, springback behavior from three-point bending loading–unloading tests and biocompatibility from human osteoblast cell adhesion and proliferation experiments in Ti-15Mo al...This study examined the mechanical properties, springback behavior from three-point bending loading–unloading tests and biocompatibility from human osteoblast cell adhesion and proliferation experiments in Ti-15Mo alloy with different microstructures. The springback ratio increased after the appearance of deformation microstructures including {332} < 113 > twins and dislocations, due to the increased bending strength and unchanged Young’s modulus. By contrast, the change in springback ratio was dependent on the competing effect of the simultaneous increase in bending strength and Young’s modulus after phase transformation, namely, the isothermal ω-phase formation. Good cell adhesion and proliferation were observed on the alloy surface, and they were not significantly affected by the deformation twins, dislocations and isothermal ω-phase.The diversity of deformation and phase transformation microstructures made it possible to control the springback behavior effectively while keeping the biocompatibility of the alloy as an implant rod used for spinal fixation devices.展开更多
The deformation behavior of the as-extruded Mg-Y-Ni alloys with different volume fraction of long period stacking ordered(LPSO)phase during tension and compression was investigated by in-situ synchrotron diffraction.T...The deformation behavior of the as-extruded Mg-Y-Ni alloys with different volume fraction of long period stacking ordered(LPSO)phase during tension and compression was investigated by in-situ synchrotron diffraction.The micro-yielding,macro-yielding,tension-compression asymmetry and strain hardening behavior of the alloys were explored by combining with deformation mechanisms.The micro-yielding is dominated by basal slip of dynamic recrystallized(DRXed)grains in tension,while it is dominated by extension twinning of non-dynamic recrystallized(non-DRXed)grains in compression.At macro-yielding,the non-DRXed grains are still elastic deformed in tension and the basal slip of DRXed grains in compression are activated.Meanwhile,the LPSO phase still retains elastic deformation,but can bear more load,so the higher the volume fraction of hard LPSO phase,the higher the tensile/compressive macro-yield strength of the alloys.Benefiting from the low volume fraction of the non-DRXed grains and the delay effect of LPSO andγphases on extension twinning,the as-extruded alloys exhibit excellent tension-compression symmetry.When the volume fraction of LPSO phase reaches∼50%,tension-compression asymmetry is reversed,which is due to the fact that the LPSO phase is stronger in compression than in tension.The tensile strain hardening behavior is dominated by dislocation slip,while the dominate mechanism for compressive strain hardening changes from twinning in theα-Mg grains to kinking of the LPSO phase with increasing volume fraction of LPSO phase.The activation of kinking leads to the constant compressive strain hardening rate of∼2500 MPa,which is significantly higher than the tensile strain hardening rate.展开更多
A large-scale fine-grained Mg-Gd-Y-Zn-Zr alloy plate with high strength and ductility was successfully prepared by multi-pass friction stir processing(MFSP)technology in this work.The structure of grains and long peri...A large-scale fine-grained Mg-Gd-Y-Zn-Zr alloy plate with high strength and ductility was successfully prepared by multi-pass friction stir processing(MFSP)technology in this work.The structure of grains and long period stacking ordered(LPSO)phase were characterized,and the mechanical properties uniformity was investigated.Moreover,a quantitative relationship between the microstructure and tensile yield strength was established.The results showed that the grains in the processed zone(PZ)and interfacial zone(IZ)were refined from 50μm to 3μm and 4μm,respectively,and numerous original LPSO phases were broken.In IZ,some block-shaped 18R LPSO phases were transformed into needle-like 14H LPSO phases due to stacking faults and the short-range diffusion of solute atoms.The severe shear deformation in the form of kinetic energy caused profuse stacking fault to be generated and move rapidly,greatly increasing the transformation rate of LPSO phase.After MFSP,the ultimate tensile strength,yield strength and elongation to failure of the large-scale plate were 367 MPa,305 MPa and 18.0% respectively.Grain refinement and LPSO phase strengthening were the major strengthening mechanisms for the MFSP sample.In particularly,the strength of IZ was comparable to that of PZ because the strength contribution of the 14H LPSO phase offsets the lack of grain refinement strengthening in IZ.This result opposes the widely accepted notion that IZ is a weak region in MFSP-prepared large-scale fine-grained plate.展开更多
基金support from Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.SJCX21_1764)Department Education of Jiangsu Province(No.22KJB430003)Guangdong Basic and Applied Basic Research Foundation(No.2020A1515110394).
文摘The Mg-1Gd-0.75Er-0.5Zn-0.18Zr(at.%)alloy with long-period stacking ordered(LPSO)phase was prepared by metal mold casting and hot extrusion.The extruded samples had a typical bimodal microstructure.The different fractions of equiaxed grains were observed in annealed samples.The percentage of fine grains decreased in the extruded Mg alloys with and without annealing treatment when the extrusion temperature was increased.The LPSO phases promote recrystal-lization behavior in the samples through particle-stimulated nucleation(PSN)mechanism.The Mg alloys extruded at 300℃ with or without annealing treatment obtained the best tensile properties.At the low extrusion temperature,more finely equiaxed grains with random texture are formed through PSN,and more LPSO phase kink bands are formed,which could improve the mechanical properties of the extruded Mg alloys.
基金the financial supports from the Key Research and Development Program of Hunan Province,China(No.2023GK2020)。
文摘The homogenized Mg−5.6Gd−0.8Zn(wt.%)alloys were treated with water cooling and furnace cooling to obtain specimens without and with the 14H long-period stacking ordered(LPSO)phase.Subsequently,multi-directional forging(MDF)experiments were carried out.The microstructure and mechanical properties of different regions(the center,middle and edge regions)in the MDFed alloys were systematically investigated,and the effect of LPSO phase on them was discussed.The results show that the alloys in different regions undergo significant grain refinement during the MDF process.Inhomogeneous microstructures with different degrees of dynamic recrystallization(DRX)are formed,resulting in microhardness heterogeneity.The alloy with the LPSO phase has higher microstructure homogeneity,a higher degree of recrystallization,and better comprehensive mechanical properties than the alloy without the LPSO phase.The furnace-cooled alloy after 18 passes of MDF has the best comprehensive mechanical properties,with an ultimate compressive strength of 488 MPa,yield strength of 258 MPa,and fracture strain of 21.2%.DRX behavior is closely related to the LPSO phase and deformation temperature.The kinked LPSO phase can act as a potential nucleation site for DRX grains,while the fragmented LPSO phase promotes DRX nucleation through the particle-stimulated nucleation mechanism.
基金funded by the National Natural Science Foundation of China(Nos.51801189)The Central Guidance on Local Science and Technology Development Fund of Shanxi Province(Nos.YDZJTSX2021A027)+2 种基金The National Natural Science Foundation of China(Nos.51801189)The Science and Technology Major Project of Shanxi Province(No.20191102008,20191102007)The North University of China Youth Academic Leader Project(No.11045505).
文摘This work studied the microstructure,mechanical properties and damping properties of Mg_(95.34)Ni_(2)Y_(2.66) and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys systematically.The difference in the evolution of the long-period stacked ordered(LPSO)phase in the two alloys during heat treatment was the focus.The morphology of the as-cast Mg_(95.34)Ni_(2)Y_(2.66)presented a disordered network.After heat treatment at 773 K for 2 hours,the eutectic phase was integrated into the matrix,and the LPSO phase maintained the 18R structure.As Zn partially replaced Ni,the crystal grains became rounded in the cast alloy,and lamellar LPSO phases and more solid solution atoms were contained in the matrix after heat treatment of the Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloy.Both Zn and the heat treatment had a significant effect on damping.Obvious dislocation internal friction peaks and grain boundary internal friction peaks were found after temperature-dependent damping of the Mg_(95.34)Ni_(2)Y_(2.66)and Mg_(95.34)Zn_(1)Ni_(1)Y_(2.66)alloys.After heat treatment,the dislocation peak was significantly increased,especially in the alloy Mg_(95.34)Ni_(2)Y_(2).66.The annealed Mg_(95.34)Ni_(2)Y_(2.66)alloy with a rod-shaped LPSO phase exhibited a good damping performance of 0.14 atε=10^(−3),which was due to the difference between the second phase and solid solution atom content.These factors also affected the dynamic modulus of the alloy.The results of this study will help in further development of high-damping magnesium alloys.
基金supported by the Qinghai Provincial Science and Technology Department Basic Research Program(No.2025ZY029).
文摘The LPSO phase can effectively enhance the mechanical properties of Mg alloys.To investigate the impact of different LPSO phase contents and morphologies on the mechanical properties and strengthening mechanisms of Mg-Y-Al alloys under room temperature deformation,this study prepared Mg-12Y-1Al(WA121)alloys containing Bulk-LPSO(B-LPSO),Lattice-LPSO(L-LPSO),and Needle-like LPSO(N-LPSO)with different contents through different heat-treatment processes.The results indicate that with the increase in heat treatment time,the contents of B-LPSO phases remain essentially unchanged,and the contents of L-LPSO and N-LPSO phases gradually increase.The increase in N-LPSO phase content is the most pronounced,with the highest content(7.29%)observed in the alloy treated for 4.5 h.Moreover,the alloy treated for 4.5 h exhibits the best mechanical properties,with ultimate tensile strength(UTS),tensile yield strength(TYS),and elongation(EL)values of 177 MPa,139 MPa,and 4.27%,respectively.Compared to the as-cast alloy,UTS,TYS,and EL increased by 9.94%,11.2%,and 27.1%,respectively.The study reveals that all three LPSO phases exhibit excellent dislocation hindering effects,effectively enhancing strength of the alloy.Additionally,the N-LPSO phase,due to its dense distribution,forms numerous dislocation channels within the grains,dispersing stress concentration within the grains to improve plasticity of the alloy.Furthermore,the interaction between the N-LPSO phase and the other phases in the alloy can also enhance plasticity of the alloy.Therefore,the alloy treated for 4.5 h demonstrates a synergistic improvement in strength and plasticity.Research has revealed that the precipitation mechanism of the N-LPSO phase in the as-cast WA121 alloy involves the formation of an Al-rich region adjacent to the needle-like Mg_(24)Y_(5) phase.Subsequently,the Y element provided by the dissolving Mg_(24)Y_(5) phase reacts with this region,ultimately leading to the formation of the needle-like LPSO phase.
基金the National Natural Science Foundation of China(Grant no.52475342,51975175 and 52375329).
文摘The heterostructure preparation in Mg-rare earth(RE)alloy has attracted much attention due to the excellent enhancement of strength and ductility.However,the effect of heterostructure composition on mechanical properties in Mg-RE alloy is still not clear.In this work,three types of heterostructures with different composition induced by lamellar 14H long period stacking ordered(LPSO)phase were achieved in the Mg-Gd-Y-Zn-Zr alloys after cyclic extrusion and compression(CEC).The heterostructure was mainly composed of dynamic recrystallization(DRX)grains,deformed coarse grains,multiscale LPSO phase(blocky,granular,lamellar LPSO phase).The strength and ductility of Mg-Gd-Y-Zn-Zr alloy with heterostructure were simultaneously improved.The DRX behavior during CEC process was largely affected by the lamellar LPSO phase.The lamellar LPSO with large spacing(∼92 nm)and low thickness(∼13.46 nm)is easy to occur kinking behavior and the zigzag kinking area can serve as nucleation sites to promote DRX behavior.While the lamellar LPSO phase with high thickness(∼23.41 nm)and similar spacing(∼82 nm)was ruptured into granular LPSO phase and thus increase the volume fraction of granular LPSO phase,which made a great contribution to DRX behavior by particle stimulated nucleation.The main deformation mechanism of solution treatment+furnace cooling(SF)sample during CEC process is dominated by the multiple slips composed of basal slips,prismatic slips and pyramidal slips.For the solution treatment+air cooling(SA)sample and solution treatment+ageing treatment(ST)sample,the activation of basal slips is the critical deformation mechanism.The main contribution to yield strength is from the grain boundary,dislocation and hetero-deformation induced(HDI)strengthening.Moreover,the HDI strengthening in the SF and SA sample after CEC deformation is much larger than that of ST sample due to the distinct heterostructure composition.
基金Project supported by the National Natural Science Foundation of China(51961021,52001152 and 51901174)China Postdoctoral Science Foundation(2020M673383)。
文摘A yield phenomenon was firstly reported in an extruded Mg-6.8Y-2.5Cu alloy and the corresponding microstructure was also investigated in this work,The cast alloy is mainly composed ofα-Mg,18R long period stacking order(LPSO)phase,eutectic phase(Mg_(20)Cu_(4)Y_(1)),and Mg_(2)Cu phase.The 18R LPSO phase at the dendritic grain boundary transforms into the 14H LPSO phase in the grain interior during homogenization.After extrusion,the grain size of the homogenized alloy is remarkably refined to-3.69μm and the second phase is significantly broken and distributed in the extrusion direction.Tensile testing curves of the extrude alloy at room temperature indicate that the yield strength and ultimate tensile strength increase while the elongation of the alloy decreases with increasing strain rate.Interestingly,a yield plateau fo rms and gradually decreases with increasing strain rate.The yield phenomenon is related to the dislocation multiplication and the interaction between the movable dislocations and solute atoms.
基金financially supported by the National Natural Science Foundation of China(No.52275161)the Key Projects of International Science and Technology Cooperation in Shaanxi Province(No.2024GH-ZDXM-01)+2 种基金the Shaanxi Science and Technology Innovation Team(No.2023-CX-TD-50)the Shaanxi Qin Chuangyuan Scientists and Engineers(No.2022KXJ-145)the National Natural Science Foundation of Jiangsu Province of China(No.BK20241873),and Shaanxi Province Science and Technology Department-Shaanxi International Science and Technology Cooperation Base(No.2020GHJD-10).
文摘Although variant selection during the phase transformation of zirconium(Zr)alloys has been studied extensively,studies on the formation mechanism of microstructural characteristics related to a variant selection remain limited.The formation mechanisms of the self-accommodation morphology and inter-variant boundary characteristics of a variants in homogenized Zr-2.5Nb alloy cooled by water quenching(WQ),furnace cooling(FC),and air cooling(AC)were systematically investigated from the perspective of local strain during phase transformation.The a variants exhibited triangular morphologies in both the WQ and AC samples,and a colony morphology in the FC sample.Further,there were five types of inter-variant boundaries:TypeI<0001>/10.53°,Typell<1120>/60°,Type Ill<1.377 I 2.3770.359>/60.83°,Type IV<10553>/63.26°,and Type V<12.381.380>/90°.The proportion of Type ll is up to 98%in the AC sample and 57.9%in the WQ sample;the Type I was very low in all three samples;and a high proportion of the Type V was observed in the FC sample(23.6%).The self-accommodation morphology of a variants is closely related to the equivalent strain(Evm)during the variant selection.Theoretical calculations indicated that,for a specific 2-variant combinations,there were always one or more 3-variant combinations with a lower Evm than the 2-variant combinations.A lower eym contributes to the presence of 3-variant combinations,which forms a triangle morphology.The formation of inter-variant boundaries is determined by the type and frequency of variants as well as the eym of the 2-variant combinations.The order of the mean values of evm for the five types of boundaries was Type II(0.0757),Type III(0.0859),Type IV(0.1012),Type V(0.1112),and Type I(0.1307).That is,Type II is the easiest and Type I is the most difficult,which resulted in a very high fraction of Type ll and a very low fraction of Type I in the WQ,AC,and FC samples.The presence of a high fraction of Type V in the FC sample was related to the type and fraction of each variant.
基金the Natural Sciences and Engineering Research Council of Canada (NSERC)Ontario Trillium Scholarships (OTS) program for providing financial support+8 种基金financial support by the Premier’s Research Excellence Award (PREA)Canada Foundation for Innovation (CFI)Ryerson Research Chair (RRC) programthe Ministry of Science and Technology of China (2014DFG52810)National Great Theoretic Research Project of China (2013CB632200)National Natural Science Foundation of China (Project 51474043)Ministry of Education of China (SRFDR 20130191110018)Chongqing Municipal Government(CSTC2013JCYJC60001)Chongqing Science and Technology Commission (CSTC2011gjhz50001)
文摘This study was aimed at identifying underlying strengthening mechanisms and predicting the yield strength of as-extruded Mg-Zn-Y alloys with varying amounts of yttrium （Y） element. The addition of Y resulted in the formation of ternary 1 （Mg3YZn6）, W （Mg3Y2Zn3） and LPSO （Mg12YZn） phases which subse- quently reinforced alloys ZM31 ＋ 0.3Y, ZM31 ＋ 3.2Y and ZM31 ＋ 6Y, where the value denoted the amount of Y element （in wt%）. Yield strength of the alloys was determined via uniaxial compression testing, and grain size and second-phase particles were characterized using OM and SEM. In-situ high-temperature XRD was performed to determine the coefficient of thermal expansion （CTE）, which was derived to be 1.38 x 10^-5 K^-1 and 2.35 x 10^-5 K^-1 for W and LPSO phases, respectively. The individual strengthening effects in each material were quantified for the first time, including grain refinement, Orowan looping, thermal mismatch, dislocation density, load-bearing, and particle shearing contributions. Grain refinement was one of the major strengthening mechanisms and it was present in all the alloys studied, irrespective of the second-phase particles. Orowan looping and crE mismatch were the predominant strengthening mechanisms in the ZM31＋0.3Y and ZM31 ＋ 3.2Y alloys containing I and W phases, respectively, while load-bearing and second-phase shearing were the salient mechanisms contributing largely to the superior yield strength of the LPSO-reinforced ZM31 ＋ 6Y alloy.2017 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science ＆ Technology.
文摘Effects of chemical compositions, finish rolling temperature, isothermal temperature on runout table and coiling temperature on microstructure and mechanical properties of economical dual phase steel produced on CSP line were investigated. Experimental results showed that martensite volume fraction could be enhanced and banding mi- crostructure could be reduced by controlling Mn, Si contents and applying proper finish rolling temperature. Opti- mized processing-parameters were obtained for DP580 production on CSP line of Wuhan Iron and Steel （group） Co （WISCO） in China. Optimal mierostructure and mechanical properties could be achieved when the strip was finished rolling at the range of 790 to 830 ~C, isothermally holding at 680 to 740 ~C and coiling below 250 ~C.
基金supported by National Natural Science Foundation of China(51171161,51101137)the Major Projects of the State Nuclear Power(2011ZX06004-016)Science Fund for Distinguished Young Scholars in Hebei Province(E2011203131)
文摘The influence of mischmetal （Ce-La） addition on phase transformation and as-cast microstructure characteristics of M2 high-speed steel （HSS） was investigated using Thermo-Calc software, differential scanning calorimetry, X-ray diffractometry and scanning electron microscopy with energy dispersive spectrometry. The results showed that the measured phase transition points of M2 HSS were broadly consistent with the theoretical results. After mischmetal addition, the liquidus peak temperature, the peak temperature of the eutectic precipitation of M6C and MC were all increased, especially for the M6C which was affected significantly and increased about 31 °C. The contents of Mo and V in the eutectic carbide decreased and that of Fe increased, while in the matrix, the Mo, V and Cr contents all increased slightly. Furthermore, the microstructure of as-cast dendrite and ledeburite were refined, the total eutectic carbide content decreased and distributed into a discontinuous network, the lamellar spacing of M2C was reduced and the lamellae became thinner.
基金financially supported by the National Natural Science Foundation for Young Scientists of China(Nos.51801042 and 51704088)the National Natural Science Foundation(Nos.51971075 and 51775150)+2 种基金the Fundamental Research Funds for the Central Universitiesthe JST Advanced Low Carbon Technology Researchthe Development Program(ALCA)(No.12102886)。
文摘The homogenized Mg-8.2 Gd-3.8 Y-1.0 Zn-0.4 Zr(wt.%)alloy full of plate-shaped long period stacking ordered(LPSO)phases was hot extruded in the atmosphere and cooled by the forced-air,then the effect of forced-air cooling on the microstructure and age-hardening response of the alloy was investigated in this work.The results show that in comparison with the extruded sample cooling in the atmosphere,the forced-air cooling restricts dynamic recrystallization(DRX)and brings about finer dynamic recrystallized(DRXed)grain size,stronger basal texture and higher dislocation density.Furthermore,the forced-air cooling promotes the dynamic precipitation in the DRXed regions and facilitates formation of plate-shaped LPSO phases andγ’phases with smaller interspacing in the unrecrystallized(un DRXed)regions,then slightly restricts the precipitation ofβphases during aging.After peak-ageing treatment,the extruded sample with forced-air cooling shows superior tensile properties with a tensile yield strength of 439 MPa,an ultimate tensile strength of 493 MPa,and elongation to failure of 18.6%.
基金This work is financially supported by the National Key Research and Development Program of China(Grant No.2016YFB0301100)the Chongqing Foundation and Advanced Research Project(Grant No.cstc2019jcyj-zdxmX0010)+1 种基金the Natural Science Foundation Commission of China(Grant No.51571044 and 51874062)Fundamental Research Funds for the Central Universities(Grant No.2018CDGFCL0005 and 2019CDXYCL0031).
文摘In this work,as-cast Mg-Ni-Y alloys were proposed to develop a feasible material for fracturing balls,and their mechanical performance and corrosion behavior were systematically investigated.Long period stacking order(LPSO)phase was firstly introduced to improve both the mechanical properties and degradation rate of magnesium alloys.With the increase of LPSO phase,the compressive strength was improved significantly,while the elongation of the alloys decreased owing to the relatively brittle nature of LPSO phase.Due to the higher corrosion potential of LPSO phase,the LPSO phase can accelerate the corrosion process by providing more micro-couples.However,the LPSO phase would serve as the corrosion barrier between the corrosion medium and the matrix when the contents of LPSO phase are too high in Mg92.5Ni3Y4.5 and Mg87.5Ni5Y7.5 alloys.As-cast Mg97.5Ni1Y1.5 alloy with satisfactory mechanical properties and rapid degradation rate was successfully developed,exhibiting a high degradation rate of 6675 mm/a(93℃)in 3 wt.%KCl solution and a favorable ultimate compressive strength of 410 MPa.The degradation rate of Mg97.5Ni1Y1.5 alloy is 2-5 times of the current commercial magnesium alloy fracturing materials.
基金supported by the National Key Research and Development Program of China (No.2021YFB3701100)the National Key Research and Development Program of China (Grant No.2018YFE0115800)the National Natural Science Foundation of China (Grant No.52105412)。
文摘Featured initial microstructures of Mg-11Gd-4Y-2Zn-0.5Zr alloy(wt%) were obtained by adjusting temperatures of solid solution and cooling methods, including island intergranular 18R and 14H LPSO phases with low-density stacking faults, differentially spaced lamellar intragranular 14H-LPSO phases, and network intergranular 18R-LPSO phases with high-density intragranular stacking faults. Effects of these featured LPSO phases and stacking faults on dynamic recrystallization(DRX) behavior were investigated via hot compression. Promoted DRX behavior via particle stimulated nucleation(PSN) is introduced by coexisting intergranular island 18R and 14H LPSO phases and intragranular wide spacing lamellar 14H-LPSO phases, contributing the highest DRX fraction of 42.6%. Conversely, it is found that DRX behavior with network intergranular 18R-LPSO phases and dense intragranular stacking fault is considerably inhibited with the lowest fraction of 22.8%. That is, the restricted DRX due to dislocations pinning by stacking faults overwhelms the enhanced DRX behavior via PSN of island intergranular 18R and 14H LPSO phases. Specially, compared with dense intragranular lamellar 14H-LPSO phases, high-density stacking faults exert a larger inhibition effect on DRX behavior.
基金Projects(51301082,51464031) supported by the National Natural Science Foundation of ChinaProject(2015011038) supported by the Natural Science Foundation of Shanxi Province,China
文摘Effects of solid solution treatment and cooling on the morphology of long period stacking order(LPSO)phase and precipitation hardening behavior of Mg?2Dy?0.5Ni(molar fraction,%)alloy were investigated.Microstructures of the as-cast alloy mainly consisted ofα-Mg phase,bamboo-like Mg12DyNi phase with LPSO structure distributed between dendrites and small amounts of cubic Dy phases.During solid solution treatment at565oC for12h and subsequent different cooling conditions,dot-shaped,block,fine lamellar and rod-shaped LPSO phases precipitate in Mg matrix,respectively.For continuous cooling conditions(furnace and air cooling),the fine lamellar LPSO phase generally forms in grain interior and its volume fraction increases and block LPSO phase coarsens with increasing cooling time.For discontinuous cooling conditions(air cooling after furnace cooling to415and265°C),the dot-shaped LPSO grows into the rod-shaped phase,which results in an decrease of cooling hardening behavior of alloy.
基金the National Natural Science Foundation of China(51361010,51665012)supported by China Scholarship Council.
文摘The influence of solid solution treatment on the microstructure and corrosion resistance of as-cast Mg_(95.5)Zn_(1.5)Y_(3)alloy is characterized.The microstructure of the as-cast Mg_(95.5)Zn_(1.5)Y_(3)alloy mainly consisted ofα-Mg,W(Mg_(3)Zn_(3)Y_(2))phase,and the long period stacking ordered(LPSO)(Mg_(12)ZnY)phase.After solid solution treatment,most of the W phase disappears gradually with increasing solution treatment time,with only a small amount of W phase distributed as particle.The LPSO phase slightly dissolved into substrate,and its morphology transitions from blocky shape to rod shape.Solid solution treatment of Mg_(95.5)Zn_(1.5)Y_(3)exhibits excellent corrosion resistance,because the Y and Zn atoms became enriched in the matrix and the changed morphologies of the LPSO and W phases were modified through heat treatment.The alloy created with solid solution treatment at 520℃for 10 hours exhibits corrosion potential of−1.419 V,suggesting a significant improvement in corrosion performance.
基金The authors acknowledge the Deutsches Elektronen-Synchrotron for the provision of facilities within the framework of the proposal I-20170459 ECThe authors are also grateful for support from the Grant Agency of the Charles University,grant number 1262217+3 种基金the grant SVV-2019-260442the Czech Science Foundation under grant 17-21855Sthe Operational Programme Research,Development and Education,The Ministry of Education,Youth and Sports(OP RDE,MEYS),grant number CZ.02.1.01/0.0/0.0/16_013/0001794GG thanks the support of the Spanish Ministry of Economy and Competitiveness,grant number MAT2016-78850-R.
文摘The compressive deformation behavior of the extruded WZ42(Mg98.5Y1Zn0.5 in at.%)magnesium alloy containing a low amount of long-period stacking ordered(LPSO)phase was studied by in-situ synchrotron radiation diffraction technique.Tests were conducted at temperatures between room temperature and 350℃.Detailed microstructure investigation was provided by scanning electron microscopy,particularly the backscattered electron imaging and electron backscatter diffraction technique.The results show that twinning lost its dominance and kinking of the LPSO phase became more pronounced with increasing deformation temperature.No cracks of the LPSO phase and no debonding r at the interface between the LPSO phase and the Mg matrix were observed at temperatures above 200℃.At 350℃,the LPSO phase lost its strengthening effect and the deformation of the alloy was mainly realized by the dynamic recrystallization of the Mg matrix.
基金support from the National Key Research and Development Program of China(No.2021YFB3701100)the Natural Science Foundation Commission of China(Grant Nos.U20A20234 and 51874062)+1 种基金the Fundamental Re-search Funds for Central Universities(No.2022CDJKYJH004C)the Science and Technology Major Project of Shanxi Province(No.20191102008).
文摘As-extruded Mg-Er-Ni alloys with different volume fractions of long-period stacking ordered(LPSO)phase and density of lamellar γ' phase were prepared,and the microstructure,mechanical,and degradation properties were investigated.Coupling the bulk LPSO phase and the lamellar γ' phase,and controlling the dynamic recrystallization processes during deformation by adjusting the volume fraction of LPSO and the density of the γ' phase,a synergistic increase in strength and degradation rate can be achieved.On the one hand,the increase in corrosion rate was related to the increased volume fraction of the bulk LPSO phase and the densities of the lamellar γ' phase,which provide more galvanic corrosion.Moreover,high densities of the lamellar γ' phase can provide more corrosion interface by inhibiting the recrystallization process to refine dynamic recrystallized(DRXed)grains during the hot extrusion.On the other hand,the ultimate tensile strength(UTS)and tensile yield strength(TYS)of the Mg-Er-Ni alloy increased from 345 and 265 MPa to 514 MPa and 358 MPa,respectively,which was mainly attributed to grain boundary and texture strengthening,bulk LPSO phase and lamellar γ' phase strengthening.Overall,Mg^(-1)4Er-4Ni alloy,which contains the highest volume fraction bulk LPSO phase and the densities of lamellar γ' phase,re-alized a synergistic enhancement of strength and degradation rate.The UTS,TYS,and degradation rate of Mg^(-1)4Er-4Ni were 514 MPa,358 MPa,and 142.5 mg cm^(-2)h^(-1)(3 wt%KCl solution at 93◦C),respectively.This research provides new insight into developing Mg alloys with high strength and degradation rates for fracturing tool materials in the application of oil and gas exploitation in harsh environments.
基金supported by the National Natural Science Foundation of China(No.52071051)。
文摘This study examined the mechanical properties, springback behavior from three-point bending loading–unloading tests and biocompatibility from human osteoblast cell adhesion and proliferation experiments in Ti-15Mo alloy with different microstructures. The springback ratio increased after the appearance of deformation microstructures including {332} < 113 > twins and dislocations, due to the increased bending strength and unchanged Young’s modulus. By contrast, the change in springback ratio was dependent on the competing effect of the simultaneous increase in bending strength and Young’s modulus after phase transformation, namely, the isothermal ω-phase formation. Good cell adhesion and proliferation were observed on the alloy surface, and they were not significantly affected by the deformation twins, dislocations and isothermal ω-phase.The diversity of deformation and phase transformation microstructures made it possible to control the springback behavior effectively while keeping the biocompatibility of the alloy as an implant rod used for spinal fixation devices.
基金supported by National Natural Science Foundation of China(no.U21A2047,no.51971076 and no.52001069).
文摘The deformation behavior of the as-extruded Mg-Y-Ni alloys with different volume fraction of long period stacking ordered(LPSO)phase during tension and compression was investigated by in-situ synchrotron diffraction.The micro-yielding,macro-yielding,tension-compression asymmetry and strain hardening behavior of the alloys were explored by combining with deformation mechanisms.The micro-yielding is dominated by basal slip of dynamic recrystallized(DRXed)grains in tension,while it is dominated by extension twinning of non-dynamic recrystallized(non-DRXed)grains in compression.At macro-yielding,the non-DRXed grains are still elastic deformed in tension and the basal slip of DRXed grains in compression are activated.Meanwhile,the LPSO phase still retains elastic deformation,but can bear more load,so the higher the volume fraction of hard LPSO phase,the higher the tensile/compressive macro-yield strength of the alloys.Benefiting from the low volume fraction of the non-DRXed grains and the delay effect of LPSO andγphases on extension twinning,the as-extruded alloys exhibit excellent tension-compression symmetry.When the volume fraction of LPSO phase reaches∼50%,tension-compression asymmetry is reversed,which is due to the fact that the LPSO phase is stronger in compression than in tension.The tensile strain hardening behavior is dominated by dislocation slip,while the dominate mechanism for compressive strain hardening changes from twinning in theα-Mg grains to kinking of the LPSO phase with increasing volume fraction of LPSO phase.The activation of kinking leads to the constant compressive strain hardening rate of∼2500 MPa,which is significantly higher than the tensile strain hardening rate.
基金supported by the National Key Research and Development Program of China(2021YFB3501002)State Key Program of National Natural Science Foundation of China(5203405)+3 种基金National Natural Science Foundation of China(51974220,52104383)National Key Research and Development Program of China(2021YFB3700902)Key Research and Development Program of Shaanxi Province(2020ZDLGY13-06,2017ZDXM-GY-037)Shaanxi Province National Science Fund for Distinguished Young Scholars(2022JC-24)。
文摘A large-scale fine-grained Mg-Gd-Y-Zn-Zr alloy plate with high strength and ductility was successfully prepared by multi-pass friction stir processing(MFSP)technology in this work.The structure of grains and long period stacking ordered(LPSO)phase were characterized,and the mechanical properties uniformity was investigated.Moreover,a quantitative relationship between the microstructure and tensile yield strength was established.The results showed that the grains in the processed zone(PZ)and interfacial zone(IZ)were refined from 50μm to 3μm and 4μm,respectively,and numerous original LPSO phases were broken.In IZ,some block-shaped 18R LPSO phases were transformed into needle-like 14H LPSO phases due to stacking faults and the short-range diffusion of solute atoms.The severe shear deformation in the form of kinetic energy caused profuse stacking fault to be generated and move rapidly,greatly increasing the transformation rate of LPSO phase.After MFSP,the ultimate tensile strength,yield strength and elongation to failure of the large-scale plate were 367 MPa,305 MPa and 18.0% respectively.Grain refinement and LPSO phase strengthening were the major strengthening mechanisms for the MFSP sample.In particularly,the strength of IZ was comparable to that of PZ because the strength contribution of the 14H LPSO phase offsets the lack of grain refinement strengthening in IZ.This result opposes the widely accepted notion that IZ is a weak region in MFSP-prepared large-scale fine-grained plate.
