Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade...Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.展开更多
The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of...The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.展开更多
Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back ...Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back scattering diffraction(EBSD)observations showed that the grains in melted zone(MZ)transformed into equiaxial grains with an average size of 1.31μm,and the grains in heat affected zone(HAZ)were refined.Moreover,the texture intensity dropped significantly from 13.86 to 6.35 in MZ and 10.79 in HAZ.The temperature gradient(G)to solidification rate(R)ratio decreased when the laser scanning speed slowed down to a certain extent in the LR process,which effectively improved the highly preferred orientation and filled the hole defects in the surface of LPBF-Ti6Al4V.Furthermore,the hardness,wear resistance and corrosion resistance of the surface of the LPBF samples were improved by LR treatment.展开更多
The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Sur...The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."展开更多
The 193 nm deep-ultraviolet(DUV)laser plays a critical role in advanced semiconductor chip manufacturing[1,2],micro-nano material characterization[3,4]and biomedical analysis[5,6],due to its high spatial resolution an...The 193 nm deep-ultraviolet(DUV)laser plays a critical role in advanced semiconductor chip manufacturing[1,2],micro-nano material characterization[3,4]and biomedical analysis[5,6],due to its high spatial resolution and short wavelength.Efficient and compact 193 nm DUV laser source thus becomes a hot research area.Currently,193 nm Ar F excimer gas laser is widely employed in DUV lithography systems and serves as the enabling technology for 7 and 5 nm semiconductor fabrication.展开更多
Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance for applications of laser-plasma-based particle accelerators,the creation of high-energy-de...Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance for applications of laser-plasma-based particle accelerators,the creation of high-energy-density matter,understanding planetary science,and laser-driven fusion energy.However,experimental efforts in this regime have been limited by the lack of accessibility of over-critical densities and the poor spatiotemporal resolution of conventional diagnostics.Over the last decade,the advent of femtosecond brilliant hard X-ray free-electron lasers(XFELs)has opened new horizons to overcome these limitations.Here,for the first time,we present full-scale spatiotemporal measurements of solid-density plasma dynamics,including preplasma generation with tens of nanometer scale length driven by the leading edge of a relativistic laser pulse,ultrafast heating and ionization at the main pulse arrival,the laser-driven blast wave,and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction.These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics including small-angle X-ray scattering,resonant X-ray emission spectroscopy,and propagation-based X-ray phase-contrast imaging simultaneously at the European XFEL-HED beamline station.展开更多
Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a ...Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a laser energy output of 2.2 mJ at 10μm was obtained.By tuning the angle and temperature,a tunable laser output covering the wavelength range from 6μm to 17μm was obtained with a tuning precision better than 3 nm.The corresponding optical-to-optical conversion efficiency was 2.8%,and the slope efficiency was 4.4%.The damage effect of the output laser on detectors was also investigated,and point damage to the detector occurred at an output energy of 16.4μJ.The laser system has the advantages of miniaturization,a wide tuning range,high energy and high tuning resolution.Its broadband laser characteristics make it highly valuable for applications in atmospheric detection,infrared spectroscopy and electro-optical countermeasures.展开更多
Experiments with interacting high-velocity flows in a laser plasma can help answer fundamental questions in plasma physics and improve understanding of the mechanisms behind some astrophysical phenomena,such as the fo...Experiments with interacting high-velocity flows in a laser plasma can help answer fundamental questions in plasma physics and improve understanding of the mechanisms behind some astrophysical phenomena,such as the formation of collisionless shock waves,deceleration of accretion flows,and evolution of solar and stellar flares.This work presents the first direct experimental observations of stagnation and redirection of counterstreaming flows(jets)of laser plasma induced by intense laser pulses with intensity I~2×10^(18) W/cm^(2).Hybrid particlein-cell-fluid modeling,which takes into account the kinetic effects of ion motion and the evolution of the pressure tensor for electrons,demonstrates the compression of counterdirected toroidal self-generated magnetic fields embedded in counterstreaming plasma flows.The enhancement of the toroidal magnetic field in the interaction region results in plasma flow stagnation and redirection of the jets across the line of their initial propagation.展开更多
Able to precisely control and manipulate materials'states at micro/nano-scale level,femtosecond(fs)laser micro/nano processing technology has undergone tremendous development over the past three decades.Free-formi...Able to precisely control and manipulate materials'states at micro/nano-scale level,femtosecond(fs)laser micro/nano processing technology has undergone tremendous development over the past three decades.Free-forming three-dimensional(3D)microscale functional devices and inducing fascinating and unique physical or chemical phenomena have granted this technology powerful versatility that no other technology can match.As this technology advances rapidly in various fields of application,some key challenges have emerged and remain to be urgently addressed.This review firstly introduces the fundamental principles for understanding how fs laser pulses interact with materials and the associated unique phenomena in section 2.Then micro/nano-fabrication in transparent materials by fs laser processing is presented in section 3.Thereafter,several high efficiency/throughput fabrication methods as well as pulse-shaping techniques are listed in sections 4 and 5 reviews four-dimensional(4D)and nanoscale printing realized by fs laser processing technology.Special attention is paid to the heterogeneous integration(HI)of functional materials enabled by fs laser processing in section 6.Several intriguing examples of 3D functional micro-devices created by fs laser-based manufacturing methods such as microfluidics,lab-on-chip,micro-optics,micro-mechanics,micro-electronics,micro-bots and micro-biodevices are reviewed in section 7.Finally,a summary of the review and a perspective are proposed to explore the challenges and future opportunities for further betterment of fs laser micro/nano processing technology.展开更多
The suppression of ablative Rayleigh–Taylor instability(ARTI)by a spatially modulated laser in inertial confinement fusion(ICF)is studied through numerical simulations.The results show that in the acceleration phase ...The suppression of ablative Rayleigh–Taylor instability(ARTI)by a spatially modulated laser in inertial confinement fusion(ICF)is studied through numerical simulations.The results show that in the acceleration phase of ICF implosion,the growth of ARTI can be suppressed by using a short-wavelength spatially modulated laser.The ARTI growth rate decreases as the wavelength of the spatially modulated laser decreases,and ARTI is completely suppressed after a certain wavelength has been reached.A spatially uniform laser is introduced to keep the state of motion of the implosion fluid consistent,and it is found that the proportion of the spatially modulated laser required for complete suppression of ARTI decreases as the wavelength continues to decrease.We also optimize the spatial intensity distribution of the spatially modulated laser.In addition,as the duration of the spatially modulated laser decreases,the proportion required for completely suppressing ARTI increases,but the required energy decreases.When the perturbation wavenumber decreases,the wavelength of the spatially modulated laser required for complete suppression of ARTI becomes longer.In the case of multimode perturbation,ARTI can also be significantly suppressed by a spatially modulated laser,and the perturbation amplitude can be reduced to less than 10% of that without a spatially modulated laser.We believe that the conclusions drawn from our simulations can provide the basis for new approaches to control ARTI in ICF.展开更多
A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5w...A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.展开更多
To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the...To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the alloy across different planes were investigated.The anisotropy of SLM-fabricated Ti-6Al-4V alloys was analyzed,and the electron backscatter diffraction technique was used to investigate the influence of different grain types and orientations on the stress-strain distribution at various scales.Results reveal that in room-temperature compression tests at a strain rate of 10^(-3) s^(-1),both the compressive yield strength and microhardness vary along the deposition direction,indicating a certain degree of mechanical property anisotropy.The alloy exhibits a columnar microstructure;along the deposition direction,the grains appear equiaxed,and they have internal hexagonal close-packed(hcp)α/α'martensitic structure.α'phase has a preferential orientation approximately along the<0001>direction.Anisotropy arises from the high aspect ratio of columnar grains,along with the weak texture of the microstructure and low symmetry of the hcp crystal structure.展开更多
Combined pulsed laser(CPL),introduced in 1975 for target damage,integrates different lasers to achieve high peak power and pulse energy.However,despite decades of research,CPL remains unused for long-range target dama...Combined pulsed laser(CPL),introduced in 1975 for target damage,integrates different lasers to achieve high peak power and pulse energy.However,despite decades of research,CPL remains unused for long-range target damage due to the challenge of maintaining high peak power density over long distances.We note that a potential solution lies in leveraging the air filament generated by femtosecond laser,which can transmit peak power densities higher than 1014 W/cm^(2)under the power clamping effect.To address this,a concept of a femtosecond laser induced air filament-CW CPL for surface damage of ceramics was introduced.We found no surface changes in ceramic targets when irradiated with a CW laser alone.By way of contrast,the target can be penetrated in a very short time(20 ms)with the assistance of the femtosecond laser induced air filament.In this context,we employ high-speed shadow imaging,cross-timescale simulation models and macro-microscopic characterization,to elucidate the CPL damage mechanism.The optimal CPL,combining a 1 mJ femtosecond laser and a 500 W CW laser,yields a damage rate of 1.51×10^(7)μm^(3)/J,representing an improvement of approximately 175%compared to single femtosecond laser ablation and around 59%enhancement compared to coating-assisted CW laser ablation.Furthermore,the efficacy of the proposed femtosecond-CW CPL method is demonstrated in causing penetration damage of ceramic/metal composite material or direct damage of sapphire,showcasing its versatility in damaging applications.Consequently,the femtosecond-CW CPL ablation method presented in this paper holds great promise as a new type of damage method for transparent hard and brittle materials.展开更多
The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstru...The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.展开更多
Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric ...Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.展开更多
Tungsten(W),owing to its exceptional physical and chemical properties,is a promising candidate for plasma-facing materials.However,its intrinsic brittleness makes it highly susceptible to cracking during its processin...Tungsten(W),owing to its exceptional physical and chemical properties,is a promising candidate for plasma-facing materials.However,its intrinsic brittleness makes it highly susceptible to cracking during its processing,especially using the laser powder bed fusion(LPBF)process with high energy input.Alloying has been recognized as an effective strategy to deal with this challenge,yet investigations into rare earth element alloying for tungsten and corresponding LPBF production remain limited.In this study,yttrium(Y),a rare earth element,was introduced to alloy with tungsten,and W-Y alloys were fabricated via LPBF at various laser energy densities.Finite element simulations were conducted to predict the temperature field distributions of W-Y alloy under different laser energy densities,providing insight into the formation of metallurgical defects at various laser energy inputs.It revealed that at a suitable laser energy density of 500 J/mm^(3),the fabricated W-Y specimens exhibited smooth and flat melt paths without discernible internal pores or cracks,achieving densification of 99.3%.The W-Y alloy had a refined microstructure with fine columnar and equiaxial grains,with an average grain size of 15.83μm.The compressive strength and elongation after fracture of the W-Y alloy were 1531.93 MPa and 21.57%,respectively.The excellent hardness of 520 HV_(0.2)and wear resistance with a coefficient of friction(COF)of 0.47 were obtained.The enhanced mechanical performance could be attributed to grain refinement strengthening and dislocation strengthening.The study on the tensile properties of the intrinsic brittle W-Y sample was conducted for the first time,highlighting the intrinsic challenge of improving the tensile ductility of tungsten.This study not only provides a new perspective on rare-earth-alloyed tungsten but also offers a scientific reference for LPBF processing of high-performance W-Y alloy.展开更多
Desulfurization of CaO–Al_(2)O_(3) particles in molten steel was observed in situ using high-temperature confocal scanning laser microscopy.The effects of the aluminum and silicon contents of molten steel on desulfur...Desulfurization of CaO–Al_(2)O_(3) particles in molten steel was observed in situ using high-temperature confocal scanning laser microscopy.The effects of the aluminum and silicon contents of molten steel on desulfurization were analyzed.When the total aluminum content in the steel increased from 6 to 1100 ppm,the CaS content in CaO–Al_(2)O_(3) particles increased from 2.1wt%to 84.84wt%after the reaction for 90 s.Furthermore,when the silicon content in the steel increased from 0.01wt%to 2.20wt%,the CaS content in CaO–Al_(2)O_(3) particles increased from 1.53wt%to 79.01wt%after the reaction for 90 s.This indicates that the increase in the aluminum and silicon contents of the steel promoted the desulfurization of CaO–Al_(2)O_(3) particles.A kinetic model was established to predict the CaO–Al_(2)O_(3) particles composition,and the diffusion coefficient of sulfur in CaO–Al_(2)O_(3) particles was 9.375×10^(−10)m^(2)·s^(−1) at 1600℃,which provided a new method for the calculation of diffusion coefficient.展开更多
In this study,the effects of laser fields that can be achieved in the near future on cluster penetration probability and half-life are quantitatively investigated.The calculation results show that extreme laser fields...In this study,the effects of laser fields that can be achieved in the near future on cluster penetration probability and half-life are quantitatively investigated.The calculation results show that extreme laser fields can slightly change the cluster-decay half-life by affecting the penetration probability within a narrow range.Subsequently,we discuss the correlation between the change rate of the penetration probability and the tunneling path.The results indicate that for different parent nuclei emitting the same cluster,nuclei with longer tunneling paths are more easily affected by the laser fields.The shell effect on this correlation is also observed.In addition,the impact of laser fields on the penetration probability in any direction is investigated.展开更多
文摘Conventional ignition methods are proving to be ineffective for low-sensitivity energetic materials,highlighting the need to investigate alternative ignition systems,such as laser-based techniques.Over the past decade,lasers have emerged as a promising solution,providing focused energy beams for controllable,efficient,and reliable ignition in the field of energetic materials.This study presents a comparative analysis of two state-of-the-art ignition approaches:direct laser ignition and laser-driven flyer ignition.Experiments were performed using a Neodymium-doped Yttrium Aluminum Garnet(Nd:YAG)laser at different energy beam levels to systematically evaluate ignition onset.In the direct laser ignition test setup,the laser beam was applied directly to the energetic tested material,while laserdriven flyer ignition utilized 40 and 100μm aluminum foils,propelled at velocities ranging from 300 to 1250 m/s.Comparative analysis with the Lawrence and Trott model substantiated the velocity data and provided insight into the ignition mechanisms.Experimental results indicate that the ignition time for the laser-driven flyer method was significantly shorter,with the pyrotechnic composition achieving complete combustion faster compared to direct laser ignition.Moreover,precise ignition thresholds were determined for both methods,providing critical parameters for optimizing ignition systems in energetic materials.This work elucidates the advantages and limitations of each technique while advancing next-generation ignition technology,enhancing the reliability and safety of propulsion systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.11804348,11775056,11975154,12225505,and 12405281)the Science Challenge(Project No.TZ2018005)+2 种基金supported by the Shanghai Pujiang Program(Grant No.23PJ1414600)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0890203)supported by the Accelerator Technology Helmholtz Infrastructure consortium ATHENA.
文摘The effects of initial spin orientation on the final electron beam polarization in laser wakefield acceleration in a pre-polarized plasma are investigated theoretically and numerically.From the results of variation of the initial spin direction,the spin dynamics of the electron beam are found to depend on the self-injection mechanism.The effects of wakefields and laser fields are studied using test particle dynamics and particle-in-cell simulations based on the Thomas-Bargmann-Michel-Telegdi equation.Compared with transverse injection,longitudinal injection is found to be preferable for obtaining a highly polarized electron beam.
基金supported by the National Natural Science Foundation of China(No.51871243)the National Key Laboratory of Strength and Structural Integrity,China(No.ASSIKFJJ202304001)+3 种基金the State Key Laboratory of Precision Blasting and Hubei Key Laboratory of Blasting Engineering,China(No.PBSKL2022C01)the Guangdong-Hong Kong-Macao Joint Laboratory for Neutron Scattering Science and Technology,China(No.HT-CSNS-DG-CD-0092/2021)the Shock and Vibration of Engineering Materials and Structures Key Laboratory of Sichuan Province,China(No.22kfgk06)the Hubei Longzhong Laboratory,China(No.2022KF-08)。
文摘Laser remelting(LR)was used as an auxiliary post-treatment process for the Ti6Al4V titanium alloys fabricated by laser powder bed fusion(LPBF).Optical microscope(OM),scanning electron microscope(SEM)and electron back scattering diffraction(EBSD)observations showed that the grains in melted zone(MZ)transformed into equiaxial grains with an average size of 1.31μm,and the grains in heat affected zone(HAZ)were refined.Moreover,the texture intensity dropped significantly from 13.86 to 6.35 in MZ and 10.79 in HAZ.The temperature gradient(G)to solidification rate(R)ratio decreased when the laser scanning speed slowed down to a certain extent in the LR process,which effectively improved the highly preferred orientation and filled the hole defects in the surface of LPBF-Ti6Al4V.Furthermore,the hardness,wear resistance and corrosion resistance of the surface of the LPBF samples were improved by LR treatment.
文摘The original online version of this article was revised:Several errors occurred in the published version of the article.These have now been corrected as follows:Page 2,section"2.2 Laser Texturing Procedure of Surfaces",line 2:The device name was corrected from"YDFLP-E-50-M8"to"YDFLP-50-M8."Page 3,Section 2.4:The phrase"95%confidence interval"has been corrected to"95%confidence level."Page 3,Figure 1 caption:The phrase"fandg"has been corrected to"f and g."The order"C4 and C12"has been reversed to"C12 and C4,"in accordance with the display order in the figure.Page 4,Figure reference:The phrase"Figs.4c and d"has been corrected to"Figs.5b and c."Page 5,paragraph starting with"The ANOVA results are presented...":The phrase"95%confidence interval"has been corrected to"95%confidence level."
基金supported by the National Natural Science Foundation of China(Grant Nos.62450006,62304217,62274157,62127807,62234011,62034008,62074142,62074140)Tianshan Innovation Team Program(Grant No.2022TSYCTD0005)+1 种基金Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB0880000)Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant Nos.2023124,Y2023032)。
文摘The 193 nm deep-ultraviolet(DUV)laser plays a critical role in advanced semiconductor chip manufacturing[1,2],micro-nano material characterization[3,4]and biomedical analysis[5,6],due to its high spatial resolution and short wavelength.Efficient and compact 193 nm DUV laser source thus becomes a hot research area.Currently,193 nm Ar F excimer gas laser is widely employed in DUV lithography systems and serves as the enabling technology for 7 and 5 nm semiconductor fabrication.
基金funding from Grant No. HIDSS-0002 DASHH (Data Science in Hamburg-Helmholtz Graduate School for the Structure of Matter)partially supported by the Helmholtz Imaging platform through the project “Smart Phase.”
文摘Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance for applications of laser-plasma-based particle accelerators,the creation of high-energy-density matter,understanding planetary science,and laser-driven fusion energy.However,experimental efforts in this regime have been limited by the lack of accessibility of over-critical densities and the poor spatiotemporal resolution of conventional diagnostics.Over the last decade,the advent of femtosecond brilliant hard X-ray free-electron lasers(XFELs)has opened new horizons to overcome these limitations.Here,for the first time,we present full-scale spatiotemporal measurements of solid-density plasma dynamics,including preplasma generation with tens of nanometer scale length driven by the leading edge of a relativistic laser pulse,ultrafast heating and ionization at the main pulse arrival,the laser-driven blast wave,and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction.These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics including small-angle X-ray scattering,resonant X-ray emission spectroscopy,and propagation-based X-ray phase-contrast imaging simultaneously at the European XFEL-HED beamline station.
基金supported by Independent Innovation Science Foundation of National University of Defense Technology(Grant No.23-ZZCX-JDZ-44)。
文摘Tunable mid-infrared and far-infrared laser output was demonstrated based on BaGa_(4)Se_(7)crystals and an optical parametric oscillator(OPO).With a 1.06μm Nd:YAG laser and a double-pass singly resonant OPO cavity,a laser energy output of 2.2 mJ at 10μm was obtained.By tuning the angle and temperature,a tunable laser output covering the wavelength range from 6μm to 17μm was obtained with a tuning precision better than 3 nm.The corresponding optical-to-optical conversion efficiency was 2.8%,and the slope efficiency was 4.4%.The damage effect of the output laser on detectors was also investigated,and point damage to the detector occurred at an output energy of 16.4μJ.The laser system has the advantages of miniaturization,a wide tuning range,high energy and high tuning resolution.Its broadband laser characteristics make it highly valuable for applications in atmospheric detection,infrared spectroscopy and electro-optical countermeasures.
基金supported by Russian Science Foundation Grant No.24-62-00032.
文摘Experiments with interacting high-velocity flows in a laser plasma can help answer fundamental questions in plasma physics and improve understanding of the mechanisms behind some astrophysical phenomena,such as the formation of collisionless shock waves,deceleration of accretion flows,and evolution of solar and stellar flares.This work presents the first direct experimental observations of stagnation and redirection of counterstreaming flows(jets)of laser plasma induced by intense laser pulses with intensity I~2×10^(18) W/cm^(2).Hybrid particlein-cell-fluid modeling,which takes into account the kinetic effects of ion motion and the evolution of the pressure tensor for electrons,demonstrates the compression of counterdirected toroidal self-generated magnetic fields embedded in counterstreaming plasma flows.The enhancement of the toroidal magnetic field in the interaction region results in plasma flow stagnation and redirection of the jets across the line of their initial propagation.
基金supported by National Key R&D Program of China(Grant Nos.2021YFB2802000 and 2022YFB2804300)Science and Technology Commission of Shanghai Municipality(Grant No.21DZ1100500)+3 种基金Shanghai Municipal Science and Technology Major Projectthe Shanghai Frontiers Science Center Program(2021-2025 No.20)National Natural Science Foundation of China(Grant No.61975123)Shanghai Scienceand Technology Innovation Action Plan(Grant No.23JC1403100)。
文摘Able to precisely control and manipulate materials'states at micro/nano-scale level,femtosecond(fs)laser micro/nano processing technology has undergone tremendous development over the past three decades.Free-forming three-dimensional(3D)microscale functional devices and inducing fascinating and unique physical or chemical phenomena have granted this technology powerful versatility that no other technology can match.As this technology advances rapidly in various fields of application,some key challenges have emerged and remain to be urgently addressed.This review firstly introduces the fundamental principles for understanding how fs laser pulses interact with materials and the associated unique phenomena in section 2.Then micro/nano-fabrication in transparent materials by fs laser processing is presented in section 3.Thereafter,several high efficiency/throughput fabrication methods as well as pulse-shaping techniques are listed in sections 4 and 5 reviews four-dimensional(4D)and nanoscale printing realized by fs laser processing technology.Special attention is paid to the heterogeneous integration(HI)of functional materials enabled by fs laser processing in section 6.Several intriguing examples of 3D functional micro-devices created by fs laser-based manufacturing methods such as microfluidics,lab-on-chip,micro-optics,micro-mechanics,micro-electronics,micro-bots and micro-biodevices are reviewed in section 7.Finally,a summary of the review and a perspective are proposed to explore the challenges and future opportunities for further betterment of fs laser micro/nano processing technology.
基金supported by the National Natural Science Foundation of China(NSFC)(Nos.12074399,12204500,and 12004403)the Key Projects of Intergovernmental International Scientific and Technological Innovation Cooperation(No.2021YFE0116700)+1 种基金the Shanghai Natural Science Foundation(No.20ZR1464400)the Shanghai Sailing Program(No.22YF1455300).
文摘The suppression of ablative Rayleigh–Taylor instability(ARTI)by a spatially modulated laser in inertial confinement fusion(ICF)is studied through numerical simulations.The results show that in the acceleration phase of ICF implosion,the growth of ARTI can be suppressed by using a short-wavelength spatially modulated laser.The ARTI growth rate decreases as the wavelength of the spatially modulated laser decreases,and ARTI is completely suppressed after a certain wavelength has been reached.A spatially uniform laser is introduced to keep the state of motion of the implosion fluid consistent,and it is found that the proportion of the spatially modulated laser required for complete suppression of ARTI decreases as the wavelength continues to decrease.We also optimize the spatial intensity distribution of the spatially modulated laser.In addition,as the duration of the spatially modulated laser decreases,the proportion required for completely suppressing ARTI increases,but the required energy decreases.When the perturbation wavenumber decreases,the wavelength of the spatially modulated laser required for complete suppression of ARTI becomes longer.In the case of multimode perturbation,ARTI can also be significantly suppressed by a spatially modulated laser,and the perturbation amplitude can be reduced to less than 10% of that without a spatially modulated laser.We believe that the conclusions drawn from our simulations can provide the basis for new approaches to control ARTI in ICF.
基金Shaanxi Province Qin Chuangyuan“Scientist+Engineer”Team Construction Project(2022KXJ-071)2022 Qin Chuangyuan Achievement Transformation Incubation Capacity Improvement Project(2022JH-ZHFHTS-0012)+8 种基金Shaanxi Province Key Research and Development Plan-“Two Chains”Integration Key Project-Qin Chuangyuan General Window Industrial Cluster Project(2023QCY-LL-02)Xixian New Area Science and Technology Plan(2022-YXYJ-003,2022-XXCY-010)2024 Scientific Research Project of Shaanxi National Defense Industry Vocational and Technical College(Gfy24-07)Shaanxi Vocational and Technical Education Association 2024 Vocational Education Teaching Reform Research Topic(2024SZX354)National Natural Science Foundation of China(U24A20115)2024 Shaanxi Provincial Education Department Service Local Special Scientific Research Program Project-Industrialization Cultivation Project(24JC005,24JC063)Shaanxi Province“14th Five-Year Plan”Education Science Plan,2024 Project(SGH24Y3181)National Key Research and Development Program of China(2023YFB4606400)Longmen Laboratory Frontier Exploration Topics Project(LMQYTSKT003)。
文摘A dual-phase synergistic enhancement method was adopted to strengthen the Al-Mn-Mg-Sc-Zr alloy fabricated by laser powder bed fusion(LPBF)by leveraging the unique advantages of Er and TiB_(2).Spherical powders of 0.5wt%Er-1wt%TiB_(2)/Al-Mn-Mg-Sc-Zr nanocomposite were prepared using vacuum homogenization technique,and the density of samples prepared through the LPBF process reached 99.8%.The strengthening and toughening mechanisms of Er-TiB_(2)were investigated.The results show that Al_(3)Er diffraction peaks are detected by X-ray diffraction analysis,and texture strength decreases according to electron backscatter diffraction results.The added Er and TiB_(2)nano-reinforcing phases act as heterogeneous nucleation sites during the LPBF forming process,hindering grain growth and effectively refining the grains.After incorporating the Er-TiB_(2)dual-phase nano-reinforcing phases,the tensile strength and elongation at break of the LPBF-deposited samples reach 550 MPa and 18.7%,which are 13.4%and 26.4%higher than those of the matrix material,respectively.
基金National Natural Science Foundation of China(51504138,51674118,52271177)Hunan Provincial Natural Science Foundation of China(2023JJ50181)Supported by State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(P2024-022)。
文摘To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the alloy across different planes were investigated.The anisotropy of SLM-fabricated Ti-6Al-4V alloys was analyzed,and the electron backscatter diffraction technique was used to investigate the influence of different grain types and orientations on the stress-strain distribution at various scales.Results reveal that in room-temperature compression tests at a strain rate of 10^(-3) s^(-1),both the compressive yield strength and microhardness vary along the deposition direction,indicating a certain degree of mechanical property anisotropy.The alloy exhibits a columnar microstructure;along the deposition direction,the grains appear equiaxed,and they have internal hexagonal close-packed(hcp)α/α'martensitic structure.α'phase has a preferential orientation approximately along the<0001>direction.Anisotropy arises from the high aspect ratio of columnar grains,along with the weak texture of the microstructure and low symmetry of the hcp crystal structure.
基金supports from National Natural Science Foundation of China(Grant No.52105498)The science and technology innovation Program of Hunan Province(Grant No.2021RC3074)+2 种基金Advanced Laser Technology Laboratory of Anhui Province(AHL2022KF04)National Key R&D Program of China(Grant No.2023YFB14605500)Changsha Natural Science Foundation(kq2402089).
文摘Combined pulsed laser(CPL),introduced in 1975 for target damage,integrates different lasers to achieve high peak power and pulse energy.However,despite decades of research,CPL remains unused for long-range target damage due to the challenge of maintaining high peak power density over long distances.We note that a potential solution lies in leveraging the air filament generated by femtosecond laser,which can transmit peak power densities higher than 1014 W/cm^(2)under the power clamping effect.To address this,a concept of a femtosecond laser induced air filament-CW CPL for surface damage of ceramics was introduced.We found no surface changes in ceramic targets when irradiated with a CW laser alone.By way of contrast,the target can be penetrated in a very short time(20 ms)with the assistance of the femtosecond laser induced air filament.In this context,we employ high-speed shadow imaging,cross-timescale simulation models and macro-microscopic characterization,to elucidate the CPL damage mechanism.The optimal CPL,combining a 1 mJ femtosecond laser and a 500 W CW laser,yields a damage rate of 1.51×10^(7)μm^(3)/J,representing an improvement of approximately 175%compared to single femtosecond laser ablation and around 59%enhancement compared to coating-assisted CW laser ablation.Furthermore,the efficacy of the proposed femtosecond-CW CPL method is demonstrated in causing penetration damage of ceramic/metal composite material or direct damage of sapphire,showcasing its versatility in damaging applications.Consequently,the femtosecond-CW CPL ablation method presented in this paper holds great promise as a new type of damage method for transparent hard and brittle materials.
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
基金National Key Research and Development Program of China(2024YFB4610803)。
文摘The fatigue crack growth rate of a novel Ti-6Al-4V-1Mo titanium alloy,which is developed for laser directed energy deposition technique,was investigated before and after cyclic heat treatment(CHT).Changes in microstructure,fracture surfaces,and crack growth paths were analyzed before and after CHT.Results indicate that in the stable crack growth region,the growth rates for the as-deposited and cyclic heat-treated specimens follow the relationships da/dN=1.8651×10^(−8)(ΔK)^(3.2271)and da/dN=1.4112×10^(−8)(ΔK)^(3.1125),respectively.Compared with that at the as-deposited state,the microstructure after CHT is transformed from a uniform basket-weave microstructure to a dual-phase microstructure consisting of near-sphericalαandβ-transformed matrix phases.The cyclic process also disrupts the continuity of the grain boundaryα(αGB)at the primaryβ-phase grain boundary.The coarsening of primaryαand the disruption ofαGB continuity are the primary factors to release stress concentration and promote crack deflection,thereby decreasing the fatigue crack growth rate.Additionally,the increased occurrence of crack branching,secondary cracking,and crack bridging in cyclic heat-treated specimens further reduces the crack driving force and slows the fatigue crack growth rate.
基金supported by Research Fund of SWUST for PhD(Grant No.22zx7175)Sichuan Science and Technology Program(Grant No.2024NSFSC1097)。
文摘Based on the characteristics of laser-induced surface ignition,energetic photosensitive films show promising potential to meet the ignition requirements of various energetic materials(EMs).In this study,DATNBI/ferric alginate(DI/FeA),DI/cobalt alginate(DI/CoA),and DI/nickel alginate(DI/Ni A)films are fabricated by employing sodium alginate(SA)with a three-dimensional network structure as the film matrix,via ionic cross-linking of SA with Fe^(3+),Co^(2+),and Ni^(2+)ions.The study demonstrates that the ionic cross-linking enhances the hydrophobic performance of the films,with the water contact angle increasing from 82.1° to 123.5°.Concurrently,the films'near-infrared(NIR)light absorption improved.Furthermore,transition metal ions facilitate accelerated electron transfer,thereby catalyzing the thermal decomposition of DATNBI.Under 1064 nm laser irradiation,the DI/Fe A film exhibits exceptional combustion performance,with an ignition delay time as low as 76 ms.It successfully acts as an NIR laser ignition medium to initiate the self-sustained combustion of CL-20.This study demonstrates the synergistic realization of enhanced hydrophobicity,improved photosensitivity,and promoted catalytic decomposition through microstructural design of the material,providing new insights for the design of additive-free EMs in laser ignition applications.
基金supported by the Defense Industrial Technology Development Program(Grant No.JCKY2022212C002)the National Natural Science Foundation of China(Grant No.52225503)+1 种基金the National Natural Science Foundation of China for Creative Research Groups(Grant No.51921003)the Fundamental Research Funds for the Central Universities(Grant No.NI2024003)。
文摘Tungsten(W),owing to its exceptional physical and chemical properties,is a promising candidate for plasma-facing materials.However,its intrinsic brittleness makes it highly susceptible to cracking during its processing,especially using the laser powder bed fusion(LPBF)process with high energy input.Alloying has been recognized as an effective strategy to deal with this challenge,yet investigations into rare earth element alloying for tungsten and corresponding LPBF production remain limited.In this study,yttrium(Y),a rare earth element,was introduced to alloy with tungsten,and W-Y alloys were fabricated via LPBF at various laser energy densities.Finite element simulations were conducted to predict the temperature field distributions of W-Y alloy under different laser energy densities,providing insight into the formation of metallurgical defects at various laser energy inputs.It revealed that at a suitable laser energy density of 500 J/mm^(3),the fabricated W-Y specimens exhibited smooth and flat melt paths without discernible internal pores or cracks,achieving densification of 99.3%.The W-Y alloy had a refined microstructure with fine columnar and equiaxial grains,with an average grain size of 15.83μm.The compressive strength and elongation after fracture of the W-Y alloy were 1531.93 MPa and 21.57%,respectively.The excellent hardness of 520 HV_(0.2)and wear resistance with a coefficient of friction(COF)of 0.47 were obtained.The enhanced mechanical performance could be attributed to grain refinement strengthening and dislocation strengthening.The study on the tensile properties of the intrinsic brittle W-Y sample was conducted for the first time,highlighting the intrinsic challenge of improving the tensile ductility of tungsten.This study not only provides a new perspective on rare-earth-alloyed tungsten but also offers a scientific reference for LPBF processing of high-performance W-Y alloy.
基金supported by the National Key R&D Program of China(No.2023YFB3709900)the National Nature Science Foundation of China(No.U22A20171)+1 种基金the China Baowu Low Carbon Metallurgy Innovation Foundation(No.BWLCF202315)the High Steel Center(HSC)at North China University of Technology and University of Science and Technology Beijing,China.
文摘Desulfurization of CaO–Al_(2)O_(3) particles in molten steel was observed in situ using high-temperature confocal scanning laser microscopy.The effects of the aluminum and silicon contents of molten steel on desulfurization were analyzed.When the total aluminum content in the steel increased from 6 to 1100 ppm,the CaS content in CaO–Al_(2)O_(3) particles increased from 2.1wt%to 84.84wt%after the reaction for 90 s.Furthermore,when the silicon content in the steel increased from 0.01wt%to 2.20wt%,the CaS content in CaO–Al_(2)O_(3) particles increased from 1.53wt%to 79.01wt%after the reaction for 90 s.This indicates that the increase in the aluminum and silicon contents of the steel promoted the desulfurization of CaO–Al_(2)O_(3) particles.A kinetic model was established to predict the CaO–Al_(2)O_(3) particles composition,and the diffusion coefficient of sulfur in CaO–Al_(2)O_(3) particles was 9.375×10^(−10)m^(2)·s^(−1) at 1600℃,which provided a new method for the calculation of diffusion coefficient.
基金supported in part by the National Natural Science Foundation of China(Nos.12175100 and 11975132)the Construct Program of the Key Discipline in Hunan Province+5 种基金the Research Foundation of Education Bureau of Hunan Province,China(Nos.21B0402,18A237,22A0305)the Natural Science Foundation of Hunan Province,China(No.2018JJ2321)the Innovation Group of Nuclear and Particle Physics in USCthe Shandong Province Natural Science Foundation,China(No.ZR2022JQ04)the Opening Project of Cooperative Innovation Center for Nuclear Fuel Cycle Technology and Equipment,University of South China(No.2019KFZ10)the Hunan Provincial Innovation Foundation for Postgraduate(No.CX20251453)。
文摘In this study,the effects of laser fields that can be achieved in the near future on cluster penetration probability and half-life are quantitatively investigated.The calculation results show that extreme laser fields can slightly change the cluster-decay half-life by affecting the penetration probability within a narrow range.Subsequently,we discuss the correlation between the change rate of the penetration probability and the tunneling path.The results indicate that for different parent nuclei emitting the same cluster,nuclei with longer tunneling paths are more easily affected by the laser fields.The shell effect on this correlation is also observed.In addition,the impact of laser fields on the penetration probability in any direction is investigated.
