By using the method of eigenvectors, the atomic populations and emission spectrum are investigated in a system that consists of a cascade three-level atom resonantly interacting with a single-mode tield in a Kerr-like...By using the method of eigenvectors, the atomic populations and emission spectrum are investigated in a system that consists of a cascade three-level atom resonantly interacting with a single-mode tield in a Kerr-like medium. The atom and the field are assumed to be initially in the upper atomic state and the Fock state, respectively. Results for models with intensity-dependent coupling and with intensity-independent coupling are compared. It is found that both population dynamics and emission spectrum show no indications of atom-field decoupling in the strong field limit if the intensity-dependent coupling is taken into account.展开更多
In this paper, we find the invariant eigen-operators （IEOs） and the energy-level gap of a system with a two-level atom interacting with single mode cavity field through multi-photon transition in the presence of a K...In this paper, we find the invariant eigen-operators （IEOs） and the energy-level gap of a system with a two-level atom interacting with single mode cavity field through multi-photon transition in the presence of a Kerr-like medium. From this work, one can see that the IEO method in many eases is simpler and easier on obtaining the energy-level gap formula than the usual way.展开更多
The Hamiltonian of coupled three-level atoms interacting with light field in the cavity filled with Kerr-like medium is derived. A simplified analytic solution to the Schrodinger equation of the system is obtained. Th...The Hamiltonian of coupled three-level atoms interacting with light field in the cavity filled with Kerr-like medium is derived. A simplified analytic solution to the Schrodinger equation of the system is obtained. The case of A type atom with degenerate lower levels is discussed in detail. It is shown that the coupling strength between atoms and Kerr coefficient affect the system＇s dynamic behaviors, especially the modulation period and oscillation frequency of the squeezing parameters of the field and the collective dipole moment. Dynamic behaviors of the system are sensitive to the initial state of atoms.展开更多
In this paper, the entanglement dynamics of a double two-photon Jaynes-Cummings model with Kerr-like medium is investigated. It is shown that initial entanglement has an interesting subsequent time evolution, includin...In this paper, the entanglement dynamics of a double two-photon Jaynes-Cummings model with Kerr-like medium is investigated. It is shown that initial entanglement has an interesting subsequent time evolution, including the so-called entanglement sudden death effect. It is also shown analytically that the Kerr-like medium can repress entanglement sudden death and enhance the degree of atom-atom entanglement. A more interesting fact is that the Kerr effect is more obvious when each of the two cavities with have the Kerr-like medium than only one of them with the Kerr-like medium.展开更多
The time evolution of the linear entropy of an taking into consideration Stark shift and Kerr-like medium. atom in k-photon daynes-Cummings model is investigated The effect of both the Stark shift and Kerr-like medium...The time evolution of the linear entropy of an taking into consideration Stark shift and Kerr-like medium. atom in k-photon daynes-Cummings model is investigated The effect of both the Stark shift and Kerr-like medium on the linear entropy is analyzed using a numerical technique for the field initially in coherent state and in even coherent state. The results show that the presence of the Kerr-like medium and Stark shift has an important effect on the properties of the entropy and entanglement. It is also shown that the setting of the initial state plays a significant role in the evolution of the linear entropy and entanglement.展开更多
The cavity field spectrum of a cascade three-level atom interacting with single-mode field with Kerr-like medium in the cavity is investigated. The numerical results for the initial field in pure number state, coheren...The cavity field spectrum of a cascade three-level atom interacting with single-mode field with Kerr-like medium in the cavity is investigated. The numerical results for the initial field in pure number state, coherent state and squeezed vacuum state are calculated, respectively. It is found that the Kerr-like medium affects the spectral structure even though the initial field is in vacuum when the atom is in upper level. In the case of strong input field, the number state spectrum shows two peaks with different heights; and the superposition state spectrum shows a multipeak structure with an equal distance of two neighboring peaks. The spectral ＂central frequency＂ shifts away from the resonant frequency with the increasing of average photon number.展开更多
A system of a three-level atom interacting with single mode cavity field through multi-photon transition in the presence of a Kerr-like medium is proposed, and its pseudo-invariant eigen-operator （PIEO） and energy-l...A system of a three-level atom interacting with single mode cavity field through multi-photon transition in the presence of a Kerr-like medium is proposed, and its pseudo-invariant eigen-operator （PIEO） and energy-level gap are presented under one-order approximation.展开更多
In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entro...In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entropy alloys can exhibit similar properties to high entropy alloys and have lower costs.In this paper,a FeCoNi medium entropy alloy precursor was prepared via sol-gel and coprecipitation methods,respectively,and FeCoNi medium entropy alloys were prepared by carbothermal and hydrogen reduction.The phases and magnetic properties of FeCoNi medium entropy alloy were investigated.Results showed that FeCoNi medium entropy alloy was produced by carbothermal and hydrogen reduction at 1500℃.Some carbon was detected in the FeCoNi medium entropy alloy prepared by carbothermal reduction.The alloy prepared by hydrogen reduction was uniform and showed a relatively high purity.Moreover,the hydrogen reduction product exhibited better saturation magnetization and lower coercivity.展开更多
The influence of Nb-V microalloying on the hot deformation behavior and microstructures of medium Mn steel(MMS)was investigated by uniaxial hot compression tests.By establishing the constitutive equations for simulati...The influence of Nb-V microalloying on the hot deformation behavior and microstructures of medium Mn steel(MMS)was investigated by uniaxial hot compression tests.By establishing the constitutive equations for simulating the measured flow curves,we successfully constructed deformation activation energy(Q)maps and processing maps for identifying the region of flow instability.We concluded the following consequences of Nb-V alloying for MMS.(i)The critical strain increases and the increment diminishes with the increasing deformation temperature,suggesting that NbC precipitates more efficiently retard dynamic recrystallization(DRX)in MMS compared with solute Nb.(ii)The deformation activation energy of MMS is significantly increased and even higher than that of some reported high Mn steels,suggesting that its ability to retard DRX is greater than that of the high Mn content.(iii)The hot workability of MMS is improved by narrowing the hot processing window for the unstable flow stress,in which fine recrystallized and coarse unrecrystallized grains are present.展开更多
The growing demand for material properties in challenging environments has led to a surge of interest in rapid composition design. Given the great potential composition space, the field of high/medium entropy alloys (...The growing demand for material properties in challenging environments has led to a surge of interest in rapid composition design. Given the great potential composition space, the field of high/medium entropy alloys (H/MEAs) still lacks effective atomic-scale composition design and screening schemes, which hinders the accurate prediction of desired composition and properties. This study proposes a novel approach for rapidly designing the composition of materials with the aim of overcoming the trade-off between strength and ductility in metal matrix composites. The effect of chemical composition on stacking fault energy (SFE), shear modulus, and phase stability was investigated through the use of molecular dynamics (MD) and thermodynamic calculation software. The alloy's low SFE, highest shear modulus, and stable face-centered cubic (FCC) phase have been identified as three standard physical quantities for rapid screening to characterize the deformation mechanism, ultimate tensile strength, phase stability, and ductility of the alloy. The calculation results indicate that the optimal composition space is expected to fall within the ranges of 17 %–34 % Ni, 33 %–50 % Co, and 25 %–33 % Mn. The comparison of stress-strain curves for various predicted components using simulated and experimental results serves to reinforce the efficacy of the method. This indicates that the screening criteria offer a necessary design concept, deviating from traditional strategies and providing crucial guidance for the rapid development and application of MEAs.展开更多
Low-concentration coal mine methane(LC-CMM),which is predominantly composed of methane,serves as a clean and low-carbon energy resource with significant potential for utilization.Utilizing LC-CMM as fuel for solid oxi...Low-concentration coal mine methane(LC-CMM),which is predominantly composed of methane,serves as a clean and low-carbon energy resource with significant potential for utilization.Utilizing LC-CMM as fuel for solid oxide fuel cells(SOFCs)represents an efficient and promising strategy for its effective utilization.However,direct application in Ni-based anodes induces carbon deposition,which severely degrades cell performance.Herein,a medium-entropy oxide Sr_(2)FeNi_(0.1)Cr_(0.3)Mn_(0.3)Mo_(0.3)O_(6−δ)(SFNCMM)was developed as an anode internal reforming catalyst.Following reduction treatment,FeNi_(3) nano-alloy particles precipitate on the surface of the material,thereby significantly enhancing its catalytic activity for LC-CMM reforming process.The catalyst achieved a methane conversion rate of 53.3%,demonstrating excellent catalytic performance.Electrochemical evaluations revealed that SFNCMM-Gd_(0.1)Ce_(0.9)O_(2−δ)(GDC)with a weight ratio of 7:3 exhibited superior electrochemical performance when employed as the anodic catalytic layer.With H_(2) and LC-CMM as fuels,the single cell achieved maximum power densities of 1467.32 and 1116.97 mW·cm^(−2) at 800℃,respectively,with corresponding polarization impedances of 0.17 and 1.35Ω·cm^(2).Furthermore,the single cell maintained stable operation for over 100 h under LC-CMM fueling without significant carbon deposition,confirming its robust resistance to carbon formation.These results underscore the potential of medium-entropy oxides as highly effective catalytic layers for mitigating carbon deposition in SOFCs.展开更多
BACKGROUND Oil-based iodinated contrast media have excellent contrast properties and are widely used for hysterosalpingographic evaluation of female infertility.On abdominal radiography and computed tomography(CT)scan...BACKGROUND Oil-based iodinated contrast media have excellent contrast properties and are widely used for hysterosalpingographic evaluation of female infertility.On abdominal radiography and computed tomography(CT)scans,their radiodensity is similar to that of metallic objects,which can sometimes lead to diagnostic confusion in the postoperative settings.In this case,retained oil-based contrast medium was observed on an abdominal radiograph following a cesarean section,making it difficult to differentiate from an intraperitoneal foreign body from surgery.The patient was a 37-year-old pregnant woman who was referred to our hospital at 32 weeks and 1 day of pregnancy due to complete placenta previa for mana-gement of pregnancy and delivery.An elective cesarean section was performed at 37 weeks and 3 days.A plain abdominal radiograph taken immediately after surgery revealed a near-round,hyperdense,mass-like shadow with a regular margin in the pelvic cavity.An intraperitoneal foreign body was suspected;therefore,an abdominal CT scan was performed.The foreign body was located on the left side of the pouch of Douglas and had a CT value of 7000 Hounsfield units,similar to that of metals.The CT value strongly suggested the presence of an artificial object.However,further inquiries with the patient and her previous physician revealed a history of hysterosalpingography.Accordingly,retained oil-based iodinated contrast medium was suspected,and observation of the object’s course was adopted.CONCLUSION When intraperitoneal foreign bodies are suspected on postoperative radiographs,the possibility of oil-based iodinated contrast medium retention should be considered.展开更多
[Objectives]To evaluate the performance of two rapid chromogenic media for the detection of Bacillus cereus in milk powder,and verify the media's inclusivity,exclusivity,and accuracy,and to assess their applicabil...[Objectives]To evaluate the performance of two rapid chromogenic media for the detection of Bacillus cereus in milk powder,and verify the media's inclusivity,exclusivity,and accuracy,and to assess their applicability for the quantitative detection of B.cereus.[Methods]B.cereus in milk powder samples was quantified using two rapid chromogenic media in combination with the national standard method.Agreement between the quantitative results from the three methods was subsequently assessed for agreement via a paired t-test.[Results]No significant differences were observed between the bacterial counts yielded by the two rapid chromogenic media and the national standard method(P>0.05),with excellent agreement between them.[Conclusions]The method of rapid chromogenic culture medium is rapid and simple.展开更多
The dynamics of fluid and non-buoyant particles in a librating horizontal annulus is studied experimentally.In the absence of librations,the granular material forms a cylindrical layer near the outer boundary of the a...The dynamics of fluid and non-buoyant particles in a librating horizontal annulus is studied experimentally.In the absence of librations,the granular material forms a cylindrical layer near the outer boundary of the annulus and undergoes rigid-body rotation with the fluid and the annulus.It is demonstrated that the librational liquefaction of the granular material results in pattern formation.This self-organization process stems from the excitation of inertial modes induced by the oscillatory motion of liquefied granular material under the influence of the gravitational force.The inertial wave induces vortical fluid flow which entrains particles from rest and forms eroded areas that are equidistant from each other along the axis of rotation.Theoretical analysis and experiments demonstrate that a liquefied layer of granular material oscillates with a radian frequency equal to the angular velocity of the annulus and interacts with the inertial wave it excites.The new phenomenon of libration-induced pattern formation is of practical interest as it can be used to control multiphase flows and mass transfer in rotating containers in a variety of industrial processes.展开更多
The energy-focusing blast is an innovative and ingenious method to achieve directional fracturing.Understanding its energy regulation mechanism is critical to enhancing its practical effectiveness.This study investiga...The energy-focusing blast is an innovative and ingenious method to achieve directional fracturing.Understanding its energy regulation mechanism is critical to enhancing its practical effectiveness.This study investigates the energy regulation mechanism and explores the medium-filling effects within the energy-focusing blast by employing theoretical analysis,numerical simulations,and model tests.The findings by theoretical and numerical analysis first reveal that two stages of the fracturing and tensile stage govern the directionally crack propagation,in which the explosion energy in the non-energyfocusing direction is suppressed,compressing the borehole wall,while redirected energy produces tensile stress in the energy-focusing direction,driving the formation of directional cracks.The choice of filling medium significantly affects directional cracking due to its impact on energy distribution and regulation,and key properties such as wave impedance and compressibility of the filling medium are critical.Experimental comparisons using air,sand,and water as filling media further disclose the distinct effects of the medium on energy regulation and directional crack growth of the energy-focusing blast.The maximum shaped-energy coefficients for air,sand,and water are 1.30,4.41,and 6.12 in the energy-focusing direction,respectively.Meanwhile,the stress attenuation rate of air,sand,and water increases in that order.The higher wave impedance and lower compressibility of water support efficient and uniform energy propagation,which subtly enhances the tensile actions in the focusing direction and intensifies the overall stress impact of the energy-focusing blast.In addition,the stresses in the non-energyfocusing directions decrease as the angle from the energy-focusing direction increases,while the stresses are relatively uniform for both air and water but noticeably uneven for sand;meanwhile,the fractal dimensions of blasting cracks in the case of air,water,and sand are 1.076,1.068,and 1.112,respectively.Sand as a filling medium leads to increased crack irregularities due to its granularity and heterogeneity.The water medium strikes an optimal balance by promoting the blasting energy transition and optimizing the energy distribution,maintaining the least flatness of the directional crack during energy-focusing blasts.展开更多
The phase constitution,microstructure,damping capacity,and mechanical properties of as-cast AlxCrFe3Ni(x=0.5,0.52,0.54,and 0.56,respectively)medium entropy alloys were investigated.It is found that the volume fraction...The phase constitution,microstructure,damping capacity,and mechanical properties of as-cast AlxCrFe3Ni(x=0.5,0.52,0.54,and 0.56,respectively)medium entropy alloys were investigated.It is found that the volume fraction of BCC phase increases while that of FCC decreases with increasing the Al content.When the content of Al is 0.54,the alloy is composed of 82.1vol.%BCC matrix and 17.9vol.%FCC phase.Wherein the FCC phase is distributed on the BCC matrix,forming a structure where the hard BCC matrix is surrounded by soft FCC phase.This results in a hindering effect on the propagation process of vibration waves.The damping performance of Al0.54CrFe_(3)Ni alloy,characterized by an internal friction of Q^(-1) is as high as 0.059,is higher than that of most FeCr damping alloys.The volume fraction of the BCC phase and the peculiar distribution of the FCC phase are identified as the key factors affecting the damping capacity.In addition,the Al0.54CrFe3Ni alloy exhibits a high yield strength of 811.16 MPa.展开更多
The concept of grain boundary engineering(GBE)has been successfully applied to L1_(2)-strengthened(CoCrNi)_(94)Al_(3)Ti_(3)medium entropy alloy,with the aim of improving the oxidation resistance by increasing the rati...The concept of grain boundary engineering(GBE)has been successfully applied to L1_(2)-strengthened(CoCrNi)_(94)Al_(3)Ti_(3)medium entropy alloy,with the aim of improving the oxidation resistance by increasing the ratio of special boundaries and suppressing discontinuous precipitation.Surprisingly,our results reveal that GBE treatment not only slows down the oxidation kinetics and but also alters the oxide scale from TiO_(2)and multi-defect Cr_(2)O_(3)to continuous and protective Cr_(2)O_(3)and Al_(2)O_(3),thereby contributing to an enhanced oxidation and anti-spalling resistance.The GBE treatment reduces the oxidation weight gain of the current alloy from 1.950 mg cm^(-2)to 1.211 mg cm^(-2)after 100 h of cyclic oxidation at 800℃.The findings show that the extensive outward diffusion of Ti accelerates ion transport and promotes microporosity,thus leading to more defects being formed in the oxide film.The GBE treatment suppresses the discontinuous precipitation of the Ti-bearing L1_(2)phase and breaks the random large angular grain boundaries network,inhibiting the diffusion of Ti and ultimately enhancing the oxidation properties of the alloy.The current work provides an idea of oxidation resistance enhancement for Ti-bearing LI_(2)-strengthened alloys without changing the alloy composition.展开更多
Sodium superionic conductors(NASICONs)have attracted enormous attention owing to their excellent ionic diffusion and structural stability.However,the high cost of vanadium,limited capacity due to fewer redox reactions...Sodium superionic conductors(NASICONs)have attracted enormous attention owing to their excellent ionic diffusion and structural stability.However,the high cost of vanadium,limited capacity due to fewer redox reactions,and low electronic conductivity restrict their practical application.Herein,we designed Na_(3.5)V_(0.5)Mn_(0.5)Fe_(0.5)Ti_(0.5)(PO_(4))3 (NVMFTP)medium entropy NASICON with multi-electron reactions as a fast sodium storage cathode for sodium-ion batteries(SIBs).The incorporation of Fe,Mn and Ti not only reduces the cost but also activates multi-redox reactions of V^(2+)/V^(3+),Ti^(3+)/Ti^(4+),Fe^(2+)/Fe^(3+),V^(3+)/V^(4+),Mn^(2+)/Mn^(3+),V^(4+)/V^(5+).Owing to distinctive structural design with medium entropy,the NVMFTP delivered 168 mAh·g^(−1) at 0.5C with a remarkable rate capability of 93.51 mAh·g^(−1) at 60C and steady long-term cycling performance till 5000 cycles.More importantly,NVMFTP takes only 11 min to achieve 80%SOC at 5C.The in-situ and ex-situ X-ray diffraction(XRD)further demonstrate reversible multi-electron reaction mechanisms of slow charging and fast charging.NVMFTP/HC full cell shows 110 mAh·g^(−1) capacity and 208 Wh·kg^(−1) energy density.This study will provide comprehensive insight into developing low-cost,cutting-edge materials for SIBs.展开更多
The impact of various initial states on the ultimate mechanical properties of medium Mn steel(MMnS)following the hot stamping process is revealed.MMnS blanks with three typical initial states were prepared separately,...The impact of various initial states on the ultimate mechanical properties of medium Mn steel(MMnS)following the hot stamping process is revealed.MMnS blanks with three typical initial states were prepared separately,including hot-rolled,cold-rolled and cold-rolled and annealed(CRA).Their microstructures were observed and analyzed by scanning electron microscopy and electron backscatter diffraction,and their mechanical properties were measured by tensile tests following hot stamping and baking treatments.The results reveal that the microstructure of martensite and residual austenite characterizes the hot-stamped MMnS across different rolling conditions,with CRA state exhibiting a clearly higher residual austenite content compared to the other two states.Meanwhile,CRA state boasts not only the highest tensile strength but also the greatest elongation post-hot stamping treatment.The superior comprehensive mechanical properties are attributed to its unique biphase structure of Mn-rich austenite and Mn-poor ferrite,which emerges in CRA state following a 12 h intercritical annealing and can be partially preserved during the hot stamping process.This structure is instrumental in achieving a higher level of residual austenite,consequently leading to enhanced elongation.展开更多
The microstructural evolution,mechanical properties,and wear behavior of medium manganese steels(MMSs)with varying aluminum(Al)contents were investigated.It was observed that the microstructure of MMS transferred from...The microstructural evolution,mechanical properties,and wear behavior of medium manganese steels(MMSs)with varying aluminum(Al)contents were investigated.It was observed that the microstructure of MMS transferred from a predominantly martensitic phase(in the Al-free state)to a ferrite/martensite or ferrite/austenite duplex structure with increasing Al content.The hardness of MMS decreased with Al addition,while the impact absorbed energy and yield strength were optimized in 2%Al-containing variant.Frictional wear tests demonstrated that 2 wt.%Al-MMS exhibited superior wear resistance due to the twinning-induced plasticity effect.Conversely,under impact abrasion wear conditions,the Al-free MMS displayed the lowest mass loss,attributing to high surface hardness and remarkable work hardening capacity.These findings indicates that Al content-tailored MMSs can be selectively applied in different wear environments,with 2 wt.%Al-MMS being optimal for static load conditions and the Al-free MMS for dynamic impact abrasion scenarios.展开更多
基金The project supported by the ‘Qing Lan＇ project of Jiangsu Province of China under Grant No. 2005SL002J
文摘By using the method of eigenvectors, the atomic populations and emission spectrum are investigated in a system that consists of a cascade three-level atom resonantly interacting with a single-mode tield in a Kerr-like medium. The atom and the field are assumed to be initially in the upper atomic state and the Fock state, respectively. Results for models with intensity-dependent coupling and with intensity-independent coupling are compared. It is found that both population dynamics and emission spectrum show no indications of atom-field decoupling in the strong field limit if the intensity-dependent coupling is taken into account.
文摘In this paper, we find the invariant eigen-operators （IEOs） and the energy-level gap of a system with a two-level atom interacting with single mode cavity field through multi-photon transition in the presence of a Kerr-like medium. From this work, one can see that the IEO method in many eases is simpler and easier on obtaining the energy-level gap formula than the usual way.
文摘The Hamiltonian of coupled three-level atoms interacting with light field in the cavity filled with Kerr-like medium is derived. A simplified analytic solution to the Schrodinger equation of the system is obtained. The case of A type atom with degenerate lower levels is discussed in detail. It is shown that the coupling strength between atoms and Kerr coefficient affect the system＇s dynamic behaviors, especially the modulation period and oscillation frequency of the squeezing parameters of the field and the collective dipole moment. Dynamic behaviors of the system are sensitive to the initial state of atoms.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10374025)the Natural Science Foundation of Hunan Province of China (Grant No. 07JJ3013)the Education Ministry of Hunan Province of China (Grant No. 06A038)
文摘In this paper, the entanglement dynamics of a double two-photon Jaynes-Cummings model with Kerr-like medium is investigated. It is shown that initial entanglement has an interesting subsequent time evolution, including the so-called entanglement sudden death effect. It is also shown analytically that the Kerr-like medium can repress entanglement sudden death and enhance the degree of atom-atom entanglement. A more interesting fact is that the Kerr effect is more obvious when each of the two cavities with have the Kerr-like medium than only one of them with the Kerr-like medium.
基金Supported by the National Natural Science Foundation of China under Grant Nos. 10674038, 10604042National Basic Research Program of China under Grant No. 2006CB302901
文摘The time evolution of the linear entropy of an taking into consideration Stark shift and Kerr-like medium. atom in k-photon daynes-Cummings model is investigated The effect of both the Stark shift and Kerr-like medium on the linear entropy is analyzed using a numerical technique for the field initially in coherent state and in even coherent state. The results show that the presence of the Kerr-like medium and Stark shift has an important effect on the properties of the entropy and entanglement. It is also shown that the setting of the initial state plays a significant role in the evolution of the linear entropy and entanglement.
基金The project supported by the Natural Science Foundation of Shandong Province under Grant No. Y2004A09
文摘The cavity field spectrum of a cascade three-level atom interacting with single-mode field with Kerr-like medium in the cavity is investigated. The numerical results for the initial field in pure number state, coherent state and squeezed vacuum state are calculated, respectively. It is found that the Kerr-like medium affects the spectral structure even though the initial field is in vacuum when the atom is in upper level. In the case of strong input field, the number state spectrum shows two peaks with different heights; and the superposition state spectrum shows a multipeak structure with an equal distance of two neighboring peaks. The spectral ＂central frequency＂ shifts away from the resonant frequency with the increasing of average photon number.
文摘A system of a three-level atom interacting with single mode cavity field through multi-photon transition in the presence of a Kerr-like medium is proposed, and its pseudo-invariant eigen-operator （PIEO） and energy-level gap are presented under one-order approximation.
基金financially supported by the National Natural Science Foundation of China(Nos.52074078 and 52374327)the Applied Fundamental Research Program of Liaoning Province,China(No.2023JH2/101600002)+3 种基金the Liaoning Provincial Natural Science Foundation,China(No.2022-YQ-09)the Shenyang Young Middle-Aged Scientific and Technological Innovation Talent Support Program,China(No.RC220491)the Liaoning Province Steel Industry-University-Research Innovation Alliance Cooperation Project of Bensteel Group,China(No.KJBLM202202)the Fundamental Research Funds for the Central Universities,China(Nos.N2201023 and N2325009)。
文摘In recent years,medium entropy alloys have become a research hotspot due to their excellent physical and chemical performances.By controlling reasonable elemental composition and processing parameters,the medium entropy alloys can exhibit similar properties to high entropy alloys and have lower costs.In this paper,a FeCoNi medium entropy alloy precursor was prepared via sol-gel and coprecipitation methods,respectively,and FeCoNi medium entropy alloys were prepared by carbothermal and hydrogen reduction.The phases and magnetic properties of FeCoNi medium entropy alloy were investigated.Results showed that FeCoNi medium entropy alloy was produced by carbothermal and hydrogen reduction at 1500℃.Some carbon was detected in the FeCoNi medium entropy alloy prepared by carbothermal reduction.The alloy prepared by hydrogen reduction was uniform and showed a relatively high purity.Moreover,the hydrogen reduction product exhibited better saturation magnetization and lower coercivity.
基金financial support from the National Natural Science Foundation of China(Nos.52233018 and 51831002)the China Baowu Low Carbon Metallurgy Innovation Foudation(No.BWLCF202213)。
文摘The influence of Nb-V microalloying on the hot deformation behavior and microstructures of medium Mn steel(MMS)was investigated by uniaxial hot compression tests.By establishing the constitutive equations for simulating the measured flow curves,we successfully constructed deformation activation energy(Q)maps and processing maps for identifying the region of flow instability.We concluded the following consequences of Nb-V alloying for MMS.(i)The critical strain increases and the increment diminishes with the increasing deformation temperature,suggesting that NbC precipitates more efficiently retard dynamic recrystallization(DRX)in MMS compared with solute Nb.(ii)The deformation activation energy of MMS is significantly increased and even higher than that of some reported high Mn steels,suggesting that its ability to retard DRX is greater than that of the high Mn content.(iii)The hot workability of MMS is improved by narrowing the hot processing window for the unstable flow stress,in which fine recrystallized and coarse unrecrystallized grains are present.
基金funding from the National Natural Science Foundation of China(Nos.52063017 and 52061025)the Major Science and Technology Project of Gansu Province(Nos.22ZD6GA008 and 20ZD7GJ008)+3 种基金the Natural Science Foundation of Gansu Province(No.23JRRA820)The Science and Technology Project of Major Science and Technology Project of Gansu Province(No.22ZD6GA008)the Science and Technology Project of Gansu Province(No.23YFGA0058)the College Industry Support Plan of Gansu Province(No.2023CYZC-27).
文摘The growing demand for material properties in challenging environments has led to a surge of interest in rapid composition design. Given the great potential composition space, the field of high/medium entropy alloys (H/MEAs) still lacks effective atomic-scale composition design and screening schemes, which hinders the accurate prediction of desired composition and properties. This study proposes a novel approach for rapidly designing the composition of materials with the aim of overcoming the trade-off between strength and ductility in metal matrix composites. The effect of chemical composition on stacking fault energy (SFE), shear modulus, and phase stability was investigated through the use of molecular dynamics (MD) and thermodynamic calculation software. The alloy's low SFE, highest shear modulus, and stable face-centered cubic (FCC) phase have been identified as three standard physical quantities for rapid screening to characterize the deformation mechanism, ultimate tensile strength, phase stability, and ductility of the alloy. The calculation results indicate that the optimal composition space is expected to fall within the ranges of 17 %–34 % Ni, 33 %–50 % Co, and 25 %–33 % Mn. The comparison of stress-strain curves for various predicted components using simulated and experimental results serves to reinforce the efficacy of the method. This indicates that the screening criteria offer a necessary design concept, deviating from traditional strategies and providing crucial guidance for the rapid development and application of MEAs.
基金supported by the National Key R&D Program of China(No.2024YFB4007501)the Natural Science Foundation of Jiangsu Province(No.BK20240109)the project of Jiangsu Key Laboratory for Clean Utilization of Carbon Resources(No.BM2024007).
文摘Low-concentration coal mine methane(LC-CMM),which is predominantly composed of methane,serves as a clean and low-carbon energy resource with significant potential for utilization.Utilizing LC-CMM as fuel for solid oxide fuel cells(SOFCs)represents an efficient and promising strategy for its effective utilization.However,direct application in Ni-based anodes induces carbon deposition,which severely degrades cell performance.Herein,a medium-entropy oxide Sr_(2)FeNi_(0.1)Cr_(0.3)Mn_(0.3)Mo_(0.3)O_(6−δ)(SFNCMM)was developed as an anode internal reforming catalyst.Following reduction treatment,FeNi_(3) nano-alloy particles precipitate on the surface of the material,thereby significantly enhancing its catalytic activity for LC-CMM reforming process.The catalyst achieved a methane conversion rate of 53.3%,demonstrating excellent catalytic performance.Electrochemical evaluations revealed that SFNCMM-Gd_(0.1)Ce_(0.9)O_(2−δ)(GDC)with a weight ratio of 7:3 exhibited superior electrochemical performance when employed as the anodic catalytic layer.With H_(2) and LC-CMM as fuels,the single cell achieved maximum power densities of 1467.32 and 1116.97 mW·cm^(−2) at 800℃,respectively,with corresponding polarization impedances of 0.17 and 1.35Ω·cm^(2).Furthermore,the single cell maintained stable operation for over 100 h under LC-CMM fueling without significant carbon deposition,confirming its robust resistance to carbon formation.These results underscore the potential of medium-entropy oxides as highly effective catalytic layers for mitigating carbon deposition in SOFCs.
文摘BACKGROUND Oil-based iodinated contrast media have excellent contrast properties and are widely used for hysterosalpingographic evaluation of female infertility.On abdominal radiography and computed tomography(CT)scans,their radiodensity is similar to that of metallic objects,which can sometimes lead to diagnostic confusion in the postoperative settings.In this case,retained oil-based contrast medium was observed on an abdominal radiograph following a cesarean section,making it difficult to differentiate from an intraperitoneal foreign body from surgery.The patient was a 37-year-old pregnant woman who was referred to our hospital at 32 weeks and 1 day of pregnancy due to complete placenta previa for mana-gement of pregnancy and delivery.An elective cesarean section was performed at 37 weeks and 3 days.A plain abdominal radiograph taken immediately after surgery revealed a near-round,hyperdense,mass-like shadow with a regular margin in the pelvic cavity.An intraperitoneal foreign body was suspected;therefore,an abdominal CT scan was performed.The foreign body was located on the left side of the pouch of Douglas and had a CT value of 7000 Hounsfield units,similar to that of metals.The CT value strongly suggested the presence of an artificial object.However,further inquiries with the patient and her previous physician revealed a history of hysterosalpingography.Accordingly,retained oil-based iodinated contrast medium was suspected,and observation of the object’s course was adopted.CONCLUSION When intraperitoneal foreign bodies are suspected on postoperative radiographs,the possibility of oil-based iodinated contrast medium retention should be considered.
基金Supported by the Inner Mongolia Autonomous Region's Key Research and Achievement Transformation Plan(2025YFSH0029).
文摘[Objectives]To evaluate the performance of two rapid chromogenic media for the detection of Bacillus cereus in milk powder,and verify the media's inclusivity,exclusivity,and accuracy,and to assess their applicability for the quantitative detection of B.cereus.[Methods]B.cereus in milk powder samples was quantified using two rapid chromogenic media in combination with the national standard method.Agreement between the quantitative results from the three methods was subsequently assessed for agreement via a paired t-test.[Results]No significant differences were observed between the bacterial counts yielded by the two rapid chromogenic media and the national standard method(P>0.05),with excellent agreement between them.[Conclusions]The method of rapid chromogenic culture medium is rapid and simple.
基金funded by the Ministry of Education of the Russian Federation within the framework of a state assignment,number 1023032300071-6-2.3.1.
文摘The dynamics of fluid and non-buoyant particles in a librating horizontal annulus is studied experimentally.In the absence of librations,the granular material forms a cylindrical layer near the outer boundary of the annulus and undergoes rigid-body rotation with the fluid and the annulus.It is demonstrated that the librational liquefaction of the granular material results in pattern formation.This self-organization process stems from the excitation of inertial modes induced by the oscillatory motion of liquefied granular material under the influence of the gravitational force.The inertial wave induces vortical fluid flow which entrains particles from rest and forms eroded areas that are equidistant from each other along the axis of rotation.Theoretical analysis and experiments demonstrate that a liquefied layer of granular material oscillates with a radian frequency equal to the angular velocity of the annulus and interacts with the inertial wave it excites.The new phenomenon of libration-induced pattern formation is of practical interest as it can be used to control multiphase flows and mass transfer in rotating containers in a variety of industrial processes.
基金supported by the National Natural Science Foundation of China(No.51904188)the China Postdoctoral Science Foundation Funded Project(No.2024M763564)the Key Laboratory of Rock Mechanics and Geohazards of Zhejiang Province(No.ZJRMG-2022-03)。
文摘The energy-focusing blast is an innovative and ingenious method to achieve directional fracturing.Understanding its energy regulation mechanism is critical to enhancing its practical effectiveness.This study investigates the energy regulation mechanism and explores the medium-filling effects within the energy-focusing blast by employing theoretical analysis,numerical simulations,and model tests.The findings by theoretical and numerical analysis first reveal that two stages of the fracturing and tensile stage govern the directionally crack propagation,in which the explosion energy in the non-energyfocusing direction is suppressed,compressing the borehole wall,while redirected energy produces tensile stress in the energy-focusing direction,driving the formation of directional cracks.The choice of filling medium significantly affects directional cracking due to its impact on energy distribution and regulation,and key properties such as wave impedance and compressibility of the filling medium are critical.Experimental comparisons using air,sand,and water as filling media further disclose the distinct effects of the medium on energy regulation and directional crack growth of the energy-focusing blast.The maximum shaped-energy coefficients for air,sand,and water are 1.30,4.41,and 6.12 in the energy-focusing direction,respectively.Meanwhile,the stress attenuation rate of air,sand,and water increases in that order.The higher wave impedance and lower compressibility of water support efficient and uniform energy propagation,which subtly enhances the tensile actions in the focusing direction and intensifies the overall stress impact of the energy-focusing blast.In addition,the stresses in the non-energyfocusing directions decrease as the angle from the energy-focusing direction increases,while the stresses are relatively uniform for both air and water but noticeably uneven for sand;meanwhile,the fractal dimensions of blasting cracks in the case of air,water,and sand are 1.076,1.068,and 1.112,respectively.Sand as a filling medium leads to increased crack irregularities due to its granularity and heterogeneity.The water medium strikes an optimal balance by promoting the blasting energy transition and optimizing the energy distribution,maintaining the least flatness of the directional crack during energy-focusing blasts.
基金supported by the Natural Science Foundation of Liaoning Province(No.2022-BS-181).
文摘The phase constitution,microstructure,damping capacity,and mechanical properties of as-cast AlxCrFe3Ni(x=0.5,0.52,0.54,and 0.56,respectively)medium entropy alloys were investigated.It is found that the volume fraction of BCC phase increases while that of FCC decreases with increasing the Al content.When the content of Al is 0.54,the alloy is composed of 82.1vol.%BCC matrix and 17.9vol.%FCC phase.Wherein the FCC phase is distributed on the BCC matrix,forming a structure where the hard BCC matrix is surrounded by soft FCC phase.This results in a hindering effect on the propagation process of vibration waves.The damping performance of Al0.54CrFe_(3)Ni alloy,characterized by an internal friction of Q^(-1) is as high as 0.059,is higher than that of most FeCr damping alloys.The volume fraction of the BCC phase and the peculiar distribution of the FCC phase are identified as the key factors affecting the damping capacity.In addition,the Al0.54CrFe3Ni alloy exhibits a high yield strength of 811.16 MPa.
基金the National Natural Science Foundation of China(Nos.U1908219,52171163)the Key Research Program of the Chinese Academy of Sciences(No.ZDRW-CN-2021-2-2)+2 种基金the National key Research&Development Program of China(No.2022YFF0609002)the Natural Science Foundation of Liaoning Province(No.2022-BS-001)China Postdoctoral Science Foundation(No.2022M713210)。
文摘The concept of grain boundary engineering(GBE)has been successfully applied to L1_(2)-strengthened(CoCrNi)_(94)Al_(3)Ti_(3)medium entropy alloy,with the aim of improving the oxidation resistance by increasing the ratio of special boundaries and suppressing discontinuous precipitation.Surprisingly,our results reveal that GBE treatment not only slows down the oxidation kinetics and but also alters the oxide scale from TiO_(2)and multi-defect Cr_(2)O_(3)to continuous and protective Cr_(2)O_(3)and Al_(2)O_(3),thereby contributing to an enhanced oxidation and anti-spalling resistance.The GBE treatment reduces the oxidation weight gain of the current alloy from 1.950 mg cm^(-2)to 1.211 mg cm^(-2)after 100 h of cyclic oxidation at 800℃.The findings show that the extensive outward diffusion of Ti accelerates ion transport and promotes microporosity,thus leading to more defects being formed in the oxide film.The GBE treatment suppresses the discontinuous precipitation of the Ti-bearing L1_(2)phase and breaks the random large angular grain boundaries network,inhibiting the diffusion of Ti and ultimately enhancing the oxidation properties of the alloy.The current work provides an idea of oxidation resistance enhancement for Ti-bearing LI_(2)-strengthened alloys without changing the alloy composition.
基金supported by the National Natural Science Foundation of China(Nos.52027801 and 92263203)the National Key R&D Program of China(Nos.2022YFA1203902 and 2022YFA1200093)and the China-Germany Collaboration Project(No.M-0199)。
文摘Sodium superionic conductors(NASICONs)have attracted enormous attention owing to their excellent ionic diffusion and structural stability.However,the high cost of vanadium,limited capacity due to fewer redox reactions,and low electronic conductivity restrict their practical application.Herein,we designed Na_(3.5)V_(0.5)Mn_(0.5)Fe_(0.5)Ti_(0.5)(PO_(4))3 (NVMFTP)medium entropy NASICON with multi-electron reactions as a fast sodium storage cathode for sodium-ion batteries(SIBs).The incorporation of Fe,Mn and Ti not only reduces the cost but also activates multi-redox reactions of V^(2+)/V^(3+),Ti^(3+)/Ti^(4+),Fe^(2+)/Fe^(3+),V^(3+)/V^(4+),Mn^(2+)/Mn^(3+),V^(4+)/V^(5+).Owing to distinctive structural design with medium entropy,the NVMFTP delivered 168 mAh·g^(−1) at 0.5C with a remarkable rate capability of 93.51 mAh·g^(−1) at 60C and steady long-term cycling performance till 5000 cycles.More importantly,NVMFTP takes only 11 min to achieve 80%SOC at 5C.The in-situ and ex-situ X-ray diffraction(XRD)further demonstrate reversible multi-electron reaction mechanisms of slow charging and fast charging.NVMFTP/HC full cell shows 110 mAh·g^(−1) capacity and 208 Wh·kg^(−1) energy density.This study will provide comprehensive insight into developing low-cost,cutting-edge materials for SIBs.
基金supported by the National Key R&D Program of China(No.2022YFE0196600)the National Natural Science Foundation of China(No.52175349)the Shanghai Oriental Talent Program(No.BJKJ2024016).
文摘The impact of various initial states on the ultimate mechanical properties of medium Mn steel(MMnS)following the hot stamping process is revealed.MMnS blanks with three typical initial states were prepared separately,including hot-rolled,cold-rolled and cold-rolled and annealed(CRA).Their microstructures were observed and analyzed by scanning electron microscopy and electron backscatter diffraction,and their mechanical properties were measured by tensile tests following hot stamping and baking treatments.The results reveal that the microstructure of martensite and residual austenite characterizes the hot-stamped MMnS across different rolling conditions,with CRA state exhibiting a clearly higher residual austenite content compared to the other two states.Meanwhile,CRA state boasts not only the highest tensile strength but also the greatest elongation post-hot stamping treatment.The superior comprehensive mechanical properties are attributed to its unique biphase structure of Mn-rich austenite and Mn-poor ferrite,which emerges in CRA state following a 12 h intercritical annealing and can be partially preserved during the hot stamping process.This structure is instrumental in achieving a higher level of residual austenite,consequently leading to enhanced elongation.
基金supported by the Guangxi Major Science and Technology Project(AB24010120)Young Talent Support Project of Guangzhou Association for Science and Technology(QT-2024-047)+3 种基金Key-Area Research and Development Program of Jiangxi Province(20243BBG71023)GDAS'Project of Science and Technology Development(2023GDASQNRC-0205 and 2024GDASZH-2024010102)Evaluation Project of Guangdong Provincial Key Laboratory(2023B1212060043)Young Elite Scientists Sponsorship Program by CAST(2022QNRC001).
文摘The microstructural evolution,mechanical properties,and wear behavior of medium manganese steels(MMSs)with varying aluminum(Al)contents were investigated.It was observed that the microstructure of MMS transferred from a predominantly martensitic phase(in the Al-free state)to a ferrite/martensite or ferrite/austenite duplex structure with increasing Al content.The hardness of MMS decreased with Al addition,while the impact absorbed energy and yield strength were optimized in 2%Al-containing variant.Frictional wear tests demonstrated that 2 wt.%Al-MMS exhibited superior wear resistance due to the twinning-induced plasticity effect.Conversely,under impact abrasion wear conditions,the Al-free MMS displayed the lowest mass loss,attributing to high surface hardness and remarkable work hardening capacity.These findings indicates that Al content-tailored MMSs can be selectively applied in different wear environments,with 2 wt.%Al-MMS being optimal for static load conditions and the Al-free MMS for dynamic impact abrasion scenarios.
