Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of sh...Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.展开更多
Dispersion of Particle-laden Jet in Supersonic Crossflow(PJSC)is an essential process in many applications,experimental study on which,however,has rarely been reported.In order to gain physical insights into PJSC,a sp...Dispersion of Particle-laden Jet in Supersonic Crossflow(PJSC)is an essential process in many applications,experimental study on which,however,has rarely been reported.In order to gain physical insights into PJSC,a specialized experimental setup capable of producing a supersonic crossflow at Mach 2.6 and a particle-laden jet with particle mass loading up to 60%is developed.Visualization of the particles motion is achieved with the help of high-speed planar laser scattering technology.The dispersion characteristics of PJSC within a supersonic channel structured by cavity are systematically analyzed through six experimental cases.The results indicate that the vortices have a significant influence on particle dispersion,leading to preferential concentration of particles.i.e.particle clusters.The particle dispersion is summarized as the"scale dispersion"pattern.The primary pathways for particles entering the cavity are identified as the shear layer above the cavity and collisions at the cavity rear edge.Among the studied factors,the momentum flux ratio exerts the most substantial influence on the dispersion process.Importantly,a reduction in the injection distance is correlated with less particles entering the cavity.The insights gained from this research provide essential references for furthering understanding particle dispersion mechanisms in supersonic flows and developing highly accurate numerical models.展开更多
The pantograph area is a critical source of aerodynamic noise in high-speed trains,generating noise both directly and through its cavity,a factor that warrants considerable attention.One effective method for reducing ...The pantograph area is a critical source of aerodynamic noise in high-speed trains,generating noise both directly and through its cavity,a factor that warrants considerable attention.One effective method for reducing aerodynamic noise within the pantograph cavity involves the introduction of a jet at the leading edge of the cavity.This study investigates the mechanisms driving cavity aerodynamic noise under varying jet velocities,using Improved Delayed Detached Eddy Simulation(IDDES)and Ffowcs Williams-Hawkings(FW-H)equations.The numerical simulations reveal that an increase in jet velocity results in a higher elevation of the shear layer above the cavity.This elevation,in turn,diminishes the interaction area between the vortices produced by jet shedding and the trailing edge of the cavity wall.Consequently,the amplitude of pressure pulsations on the cavity surface is reduced,leading to a decrease in radiated far-field noise.Specifically,simulations conducted with a jet velocity of 111.11 m/s indicate a remarkable noise reduction of approximately 4 dB attributable to this mechanism.To further enhance noise mitigation,alterations to the inclination angles of the cavity’s front and rear walls are also explored.The findings demonstrate that,at a constant jet velocity,such modifications significantly diminish pressure pulsations at the intersection of the rear wall and cavity floor,optimizing overall noise reduction and achieving a maximum reduction of approximately 6 dB.展开更多
An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is p...An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is presented. Four collision tests have been performed: two tests in Backward Moving Plate(BMP) configuration, where the plate moves in opposition to jet, and two tests in Forward Moving Plate(FMP) configuration, where the plate moves alongside the jet. Based on the virtual origin approximation,a methodology(the Virtual Origin Method, VOM) is developed to extract quantities from the X-ray images, which serve as comparative data. γSPH simulations are carried out to complete the analysis, as they well capture the disturbance dynamics observed in the experiments. Based on these complementary experimental and numerical results, a new physical description is proposed through a detailed analysis of the interaction. It is shown that the SCJ/MP interaction is driven at first order by the contact geometry. Thus, BMP and FMP configurations do not generate the same disturbances because their local flow geometries are different. In the collision point frame of reference, the BMP flows in the same direction as the jet, causing its overall deflection. On the contrary, the FMP flow opposes that of the jet leading to an alternative creation of fragments and ligaments. An in-depth study, using the VOM shows that deflection angles, fragment-ligament creation frequencies, and deflection velocities evolve as the interaction progresses through slower jet elements.展开更多
Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is...Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is vacuumized. The experiment results show that observing jet appearance with the double reflecting mirrors system is feasible as long as the vacuum of the glass tube can meet the requirement of experiment.展开更多
A two-dimensional（2-D） incompressible plane jet is investigated using the lattice Boltzmann method（LBM） for low Reynolds numbers of 42 and 65 based on the jet-exit-width and the maximum jet-exit-velocity. The resu...A two-dimensional（2-D） incompressible plane jet is investigated using the lattice Boltzmann method（LBM） for low Reynolds numbers of 42 and 65 based on the jet-exit-width and the maximum jet-exit-velocity. The results show that the mean centerline velocity decays as x-1/3 and the jet spreads as x2/3 in the self-similar region, which are consistent with the theoretical predictions and the experimental data. The time histories and PSD analyses of the instantaneous centerline velocities indicate the periodic behavior and the interaction between periodic components of velocities should not be neglected in the far field region, although it is invisible in the near field region.展开更多
A primary air jet vectoring control system with a novel synthetic jet actuator （SJA） is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, ...A primary air jet vectoring control system with a novel synthetic jet actuator （SJA） is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either ＂push＂ or ＂pull＂, one novel synthetic jet actuator can fulfill both ＂push＂ and ＂pull＂ functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.展开更多
The Dual Synthetic Jet Actuator(DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional(2D)NACA0015 airfoil. The lift enhancement d...The Dual Synthetic Jet Actuator(DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional(2D)NACA0015 airfoil. The lift enhancement device is composed of a DSJA and a rounded trailing edge(Coanda surface). The two outlets of the DSJA eject two jets(Jet 1 and Jet 2). Jet 1 ejects from the upper trailing edge, which increases the circulation of airfoil with the help of the Coanda surface. Jet2 ejects from the lower trailing edge, which acts as a virtual flap. The Reynolds number based on the airfoil chord length and free flow velocity is 250000. The results indicate that the circulation control method based on Dual Synthetic Jet(DSJ) has good performance in lift enhancement, whose control effect is closely related to momentum coefficient and reduced frequency. With the increase of the reduced frequency, the control effect of the lift enhancement is slightly reduced. As the momentum coefficient increases, the control effect becomes better. When the angle of attack is greater than 4°, the increments of lift coefficients under the control of DSJ are larger than those under the control of the steady blowing at a same momentum coefficient. The maximum lift augmentation efficiency can reach 47 when the momentum coefficient is 0.02, which is higher than the value in the case with steady blowing jet circulation control.展开更多
A simple dielectric barrier discharge（DBD） jet array was designed with a liquid electrode and helium gas.The characteristics of the jet array discharge and the preliminary polymerization with acrylic acid（AA） mono...A simple dielectric barrier discharge（DBD） jet array was designed with a liquid electrode and helium gas.The characteristics of the jet array discharge and the preliminary polymerization with acrylic acid（AA） monomer were presented.The plasma reactor can produce a cold jet array with a gas temperature lower than 315 K,using an applied discharge power between 6 W and 30 W（V dis × I dis）.A silk fibroin film（SFF） was modified using the jet array and AA monomer,and the treated SFF samples were characterized by atomic force microscopy（AFM）,scanning electron microscopy（SEM）,Fourier transform infrared spectroscopy（FTIR）,and contact angle（CA）.The deposition rate of the poly acrylic acid（PAA） was able to reach 300 nm/min,and the surface roughness and energy increased with the AA flow rate.The FTIR results indicate that the modified SFF had more carboxyl groups（-COOH） than the original SFF.This latter characteristic allowed the modified SFF to immobilize more quantities of antimicrobial peptide（AP,LL-37） which inhibited the Escherichia coli（E.Coli） effectively.展开更多
The low latitude easterlies at 200 hPa in summer (May-October) is analysed climatically during the 13-year period from 1968 to 1980, with a special emphasis on the relationships between the anomalous tropical easterly...The low latitude easterlies at 200 hPa in summer (May-October) is analysed climatically during the 13-year period from 1968 to 1980, with a special emphasis on the relationships between the anomalous tropical easterly jet Stream over South Asia and the low latitude atmospheric circulation, and also the summer monsoon precipitation in India. The compositing analysis shows that the tropical easterly jet stream over South Asia has five anomalous patterns at 200 hPa i.e. the western pattern, middle pattern, eastern pattern, two-branch pattern and multi-core pattern. Evidence has shown that the precipitaion in India anomalously increased during the anomalous period of the western pattern and the middle pattern, but reverse case is true in the eastern pattern. Some different anomalies of the precipitation in different area of India were found during the other two anomalous pattern.展开更多
An atmospheric-pressure plasma jet array specially designed for HTV silicone rubber treatment is reported in this paper. Stable plasma containing highly energetic active particles was uniformly generated in the plasma...An atmospheric-pressure plasma jet array specially designed for HTV silicone rubber treatment is reported in this paper. Stable plasma containing highly energetic active particles was uniformly generated in the plasma jet array. The discharge pattern was affected by the applied voltage. The divergence phenomenon was observed at low gas flow rate and abated when the flow rate increased.Temperature of the plasma plume is close to room temperature which makes it feasible for temperature-sensitive material treatment. Hydrophobicity of contaminated HTV silicone rubber was significantly improved after quick exposure of the plasma jet array, and the effective treatment area reached 120 mm？×？50 mm（length？×？width）. Reactive particles in the plasma accelerate accumulation of the hydrophobic molecules, namely low molecular weight silicone chains, on the contaminated surface, which result in a hydrophobicity improvement of the HTV silicone rubber.展开更多
The primary issue regarding the plasma synthetic jet actuator(PSJA)is its performance attenuation at high frequencies.To solve this issue,a self-supplementing,dual-cavity,plasma synthetic jet actuator(SD-PSJA)is desig...The primary issue regarding the plasma synthetic jet actuator(PSJA)is its performance attenuation at high frequencies.To solve this issue,a self-supplementing,dual-cavity,plasma synthetic jet actuator(SD-PSJA)is designed,and the static properties of the SD-PSJA are investigated through experiments and numerical simulations.The pressure measurement shows that the SD-PSJA has two saturation frequencies(1200 Hz and 2100 Hz),and the experimental results show that both the saturation frequencies decrease as the volume of the bottom cavity of the SD-PSJA increases.As the size of the supplement hole increases,the first saturation frequency increases continuously,while the second saturation frequency shows a trend of first decreasing and then increasing.Numerical simulations show that the working process of the SD-PSJA is similar to that of the PSJA,but the volume of the cavity in the SD-PSJA is smaller than that of the PSJA;the SD-PSJA can supplement air to the top cavity through two holes,thus reducing the refresh time and effectively improving the jet intensity of the actuator at high frequencies.展开更多
In this paper,we propose a stable heat jet approach for accurate temperature control of the nonlinear Fermi-Pasta-Ulam beta(FPU-β)chain.First,we design a stable nonlinear boundary condition,with co-efficients determi...In this paper,we propose a stable heat jet approach for accurate temperature control of the nonlinear Fermi-Pasta-Ulam beta(FPU-β)chain.First,we design a stable nonlinear boundary condition,with co-efficients determined by a machine learning technique.Its stability can be proved rigorously.Based on this stable boundary condition,we derive a two-way boundary condition complying with phonon heat source,and construct stable heat jet approach.Numerical tests illustrate the stability of the boundary condition and the effectiveness in eliminating boundary reflections.Furthermore,we extend the bound-ary condition formulation with more atoms,and train the coefficients to eliminate extreme short waves by machine learning technique.Under this extended boundary condition,the heat jet approach is effec-tive for high temperature,and may be adopted for multiscale computation of atomic motion at finite temperature.展开更多
Plasma synthetic jet actuator（PSJA） has a wide application prospect in the high-speed flow control field for its high jet velocity.In this paper,the influence of the air pressure on the performance of a two-electrod...Plasma synthetic jet actuator（PSJA） has a wide application prospect in the high-speed flow control field for its high jet velocity.In this paper,the influence of the air pressure on the performance of a two-electrode PSJA is investigated by the schlieren method in a large range from 7 k Pa to 100 k Pa.The energy consumed by the PSJA is roughly the same for all the pressure levels.Traces of the precursor shock wave velocity and the jet front velocity vary a lot for different pressures.The precursor shock wave velocity first decreases gradually and then remains at 345 m/s as the air pressure increases.The peak jet front velocity always appears at the first appearance of a jet,and it decreases gradually with the increase of the air pressure.A maximum precursor shock wave velocity of 520 m/s and a maximum jet front velocity of 440 m/s are observed at the pressure of 7 k Pa.The averaged jet velocity in one period ranges from 44 m/s to 54 m/s for all air pressures,and it drops with the rising of the air pressure.High velocities of the precursor shock wave and the jet front indicate that this type of PSJA can still be used to influence the high-speed flow field at 7 k Pa.展开更多
The major features of the westerly jets in boreal winter, consisting of the Middle East jet stream （MEJS）, East Asian jet stream （EAJS） and North Atlantic jet stream （NAJS）, simulated by a newly developed climat...The major features of the westerly jets in boreal winter, consisting of the Middle East jet stream （MEJS）, East Asian jet stream （EAJS） and North Atlantic jet stream （NAJS）, simulated by a newly developed climate system model, were evaluated with an emphasis on the meridional location of the westerly jet axis （WJA）. The model was found to exhibit fairly good performance in simulating the EAJS and NAJS, whereas the MEJS was much weaker and indistinguishable in the model. Compared with the intensity bias, the southward shift of the WJA seems to be a more remarkable deficiency. From the perspective of Ertel potential vorticity, the profiles along different westerly jet cores in the model were similar with those in the reanalysis but all shifted southward, indicating an equatorward displacement of the dynamic tropopause and associated climatology. Diagnosis of the thermodynamic equation revealed that the model produced an overall stronger heating source and the streamfunction quantifying the convection and overturning Hadley circulation shifted southward significantly in the middle and upper troposphere. The two maximum centers of eddy kinetic energy, corresponding to the EAJS and NAJS, were reproduced, whereas they all shifted southwards with a much reduced intensity. A lack of transient eddy activity will reduce the efficiency of poleward heat transport, which may partially contribute to the meridionally non-uniform cooling in the middle and upper troposphere. As the WJA is closely related to the location of the Hadley cell, tropopause and transient eddy activity, the accurate simulation of westerly jets will greatly improve the atmospheric general circulation and associated climatology in the model.展开更多
In the titanium dioxide industry,there is a lack of a low-cost and high-efficiency treatment method for chloride containing tail gas.In this paper,the removal of HCl from the titanium dioxide industry by gas cyclone-l...In the titanium dioxide industry,there is a lack of a low-cost and high-efficiency treatment method for chloride containing tail gas.In this paper,the removal of HCl from the titanium dioxide industry by gas cyclone-liquid jet separator was studied,while Ca(OH)_(2),Na_(2)CO_(3),NaOH solution,and water were used as absorbents.This paper investigated the influence of gas cyclone-liquid jet separator’s various process parameters on the removal rate of hydrogen chloride gas.The mechanism of mass transfer in the process of removing hydrogen chloride was discussed,and the effect and feasibility of HCl gas removal in the gas cyclone-liquid jet absorption separator were studied.The results showd that the removal efficiency of hydrogen chloride maintained above 95%,up to 99.9%,and the total mass transfer coefficient reached0.28 mol·m^(-3)·s^(-1)·k Pa^(-1).Under the same conditions,the absorption effect and total mass transfer coefficient of weak basic absorption liquid can be greatly improved by increasing the flow rate of absorption liquid,but the absorption effect and total mass transfer coefficient of strong alkaline absorption liquid can’t be improved obviously.The larger the inlet gas volume,the higher the gas concentration,the lower the absorption efficiency and the lower the total volumetric mass transfer coefficient.展开更多
Based on the stress-algebraic model, the turbulent buoyant jet with variable density was studied by the relation between density and concentration. A simple expression for buoyancy coefficient was proposed. The govern...Based on the stress-algebraic model, the turbulent buoyant jet with variable density was studied by the relation between density and concentration. A simple expression for buoyancy coefficient was proposed. The governing equations of turbulent buoyant jet with variable density were closed by introducing the expression of β and the relation between density and concentration. Numerical results for the jet axis with density difference agree well with experimental ones. By finite volume method, the 2 - D vertical jet＇s flow field with different jet angles was studied. The analysis of the relation among the vortex center, the position of separation point and jet angles shows that the circumfluenee field is the largest when the jet angle is 90°. The area turbulent kinetic energy ka is proposed and the relationship between mixing intensity and jet angles is analyzed based on it. Results show that the jet angle of is the optimum condition for jet water mixing with environment water;and the reduced rate of difference between the centerline density of jet and the density of ambient water is the largest at the jet angle of 90°.展开更多
The intensification of a low-level jet off the Somali coast, as observed through GOES (I-O) satellite during Indian summer monsoon 1979 has been studied. Excitation of Low-level cross-equatorial flow in the western In...The intensification of a low-level jet off the Somali coast, as observed through GOES (I-O) satellite during Indian summer monsoon 1979 has been studied. Excitation of Low-level cross-equatorial flow in the western Indian ocean results from an interaction between extratropical perturbations moving eastward across the South African-Malgassy region of the Southern Hemisphere. This excitation occurs 2-3 days after the first appearance of a northward propagation cold front across the South African-Malgassy region. Inten-sification of cross-equatorial flow is followed by an increase in rainfall activity along the west coast of India after 3-4 days. The study reveals that this association can be used to forecast an increase in rainfall activity along the west coast of India 5-7 days in advance.展开更多
As an active flow control technology and with the advantages of no moving components, the Sweeping jet actuator has become a hotspot in the field of flow control. However, the linear relationship between oscillation f...As an active flow control technology and with the advantages of no moving components, the Sweeping jet actuator has become a hotspot in the field of flow control. However, the linear relationship between oscillation frequency and momentum coefficient in a sweeping jet actuator makes it difficult to determine the dominant factors that affect control effectiveness. Decoupling the oscillation frequency and momentum coefficient, as well as determining the control mechanism, is the focus of studying the sweeping jet actuator. In this study, a novel sweeping jet actuator is designed using synthetic jets instead of feedback channels and applied to the flow separation control of NACA0018 airfoil. This article studies the control effect under three oscillation frequencies of F<sup>+</sup> = f × c/U<sub>∞</sub> = 1, 10, 100 and three momentum coefficients of C<sub>μ</sub> = 0.45%, 0.625%, 0.9%. The numerical results indicate that all three oscillation frequencies have good control effects on flow separation, and the control effect is best when F<sup>+</sup> = 1, with the maximum lift coefficient increasing by approximately 14% compared to the other two cases. And the sweeping jet actuator has a better ability to control flow separation as the momentum coefficient increases. By decoupling the characteristics of the sweeping jet actuator and conducting numerical analysis of the flow control effect, it will promote its better engineering application in the field of flow control. .展开更多
基金supported by the National Science Foundation of China(Grant Nos.12372361,12102427,12372335 and 12102202)the Fundamental Research Funds for the Central Universities(Grant No.30923010908)Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX23_0520).
文摘Shaped charge has been widely used for penetrating concrete.However,due to the obvious difference between the propagation of shock waves and explosion products in water and air,the theory governing the formation of shaped charge jets in water as well as the underwater penetration effect of concrete need to be studied.In this paper,we introduced a modified forming theory of an underwater hemispherical shaped charge,and investigated the behavior of jet formation and concrete penetration in both air and water experimentally and numerically.The results show that the modified jet forming theory predicts the jet velocity of the hemispherical liner with an error of less than 10%.The underwater jets exhibit at least 3%faster and 11%longer than those in air.Concrete shows different failure modes after penetration in air and water.The depth of penetration deepens at least 18.75%after underwater penetration,accompanied by deeper crater with 65%smaller radius.Moreover,cracks throughout the entire target are formed,whereas cracks exist only near the penetration hole in air.This comprehensive study provides guidance for optimizing the structure of shaped charge and improves the understanding of the permeability effect of concrete in water.
基金co-supported by the National Natural Science Foundation of China (No. 12272409)the Scientific Research and Innovation Project of Hunan Province, China (Nos. CX20230058, kq2107001, 2022RC1233 and QL20230015)
文摘Dispersion of Particle-laden Jet in Supersonic Crossflow(PJSC)is an essential process in many applications,experimental study on which,however,has rarely been reported.In order to gain physical insights into PJSC,a specialized experimental setup capable of producing a supersonic crossflow at Mach 2.6 and a particle-laden jet with particle mass loading up to 60%is developed.Visualization of the particles motion is achieved with the help of high-speed planar laser scattering technology.The dispersion characteristics of PJSC within a supersonic channel structured by cavity are systematically analyzed through six experimental cases.The results indicate that the vortices have a significant influence on particle dispersion,leading to preferential concentration of particles.i.e.particle clusters.The particle dispersion is summarized as the"scale dispersion"pattern.The primary pathways for particles entering the cavity are identified as the shear layer above the cavity and collisions at the cavity rear edge.Among the studied factors,the momentum flux ratio exerts the most substantial influence on the dispersion process.Importantly,a reduction in the injection distance is correlated with less particles entering the cavity.The insights gained from this research provide essential references for furthering understanding particle dispersion mechanisms in supersonic flows and developing highly accurate numerical models.
基金supported by National Natural Science Foundation of China(12172308).
文摘The pantograph area is a critical source of aerodynamic noise in high-speed trains,generating noise both directly and through its cavity,a factor that warrants considerable attention.One effective method for reducing aerodynamic noise within the pantograph cavity involves the introduction of a jet at the leading edge of the cavity.This study investigates the mechanisms driving cavity aerodynamic noise under varying jet velocities,using Improved Delayed Detached Eddy Simulation(IDDES)and Ffowcs Williams-Hawkings(FW-H)equations.The numerical simulations reveal that an increase in jet velocity results in a higher elevation of the shear layer above the cavity.This elevation,in turn,diminishes the interaction area between the vortices produced by jet shedding and the trailing edge of the cavity wall.Consequently,the amplitude of pressure pulsations on the cavity surface is reduced,leading to a decrease in radiated far-field noise.Specifically,simulations conducted with a jet velocity of 111.11 m/s indicate a remarkable noise reduction of approximately 4 dB attributable to this mechanism.To further enhance noise mitigation,alterations to the inclination angles of the cavity’s front and rear walls are also explored.The findings demonstrate that,at a constant jet velocity,such modifications significantly diminish pressure pulsations at the intersection of the rear wall and cavity floor,optimizing overall noise reduction and achieving a maximum reduction of approximately 6 dB.
基金supported by the Ministère des Armées,and the Agence de l'Innovation de Défense(AID).
文摘An analysis of the interaction mechanisms between a Shaped Charge Jet(SCJ) and a single Moving Plate(MP) is proposed in this article using both experimental and numerical approaches. First, an experimental set-up is presented. Four collision tests have been performed: two tests in Backward Moving Plate(BMP) configuration, where the plate moves in opposition to jet, and two tests in Forward Moving Plate(FMP) configuration, where the plate moves alongside the jet. Based on the virtual origin approximation,a methodology(the Virtual Origin Method, VOM) is developed to extract quantities from the X-ray images, which serve as comparative data. γSPH simulations are carried out to complete the analysis, as they well capture the disturbance dynamics observed in the experiments. Based on these complementary experimental and numerical results, a new physical description is proposed through a detailed analysis of the interaction. It is shown that the SCJ/MP interaction is driven at first order by the contact geometry. Thus, BMP and FMP configurations do not generate the same disturbances because their local flow geometries are different. In the collision point frame of reference, the BMP flows in the same direction as the jet, causing its overall deflection. On the contrary, the FMP flow opposes that of the jet leading to an alternative creation of fragments and ligaments. An in-depth study, using the VOM shows that deflection angles, fragment-ligament creation frequencies, and deflection velocities evolve as the interaction progresses through slower jet elements.
文摘Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is vacuumized. The experiment results show that observing jet appearance with the double reflecting mirrors system is feasible as long as the vacuum of the glass tube can meet the requirement of experiment.
基金Supported by the National Nature Science Foundation of China(10472046)the Scientific Innova-tion Research of College Graduate in Jiangsu Province(CX08B-035Z)the Innovation and Excellence Foundation of Doctoral Dissertation of Nanjing University of Aeronautics and Astronautics(BCXJ08-01)~~
文摘A two-dimensional（2-D） incompressible plane jet is investigated using the lattice Boltzmann method（LBM） for low Reynolds numbers of 42 and 65 based on the jet-exit-width and the maximum jet-exit-velocity. The results show that the mean centerline velocity decays as x-1/3 and the jet spreads as x2/3 in the self-similar region, which are consistent with the theoretical predictions and the experimental data. The time histories and PSD analyses of the instantaneous centerline velocities indicate the periodic behavior and the interaction between periodic components of velocities should not be neglected in the far field region, although it is invisible in the near field region.
基金National Natural Science Foundation of China (90205016, 50176055)
文摘A primary air jet vectoring control system with a novel synthetic jet actuator （SJA） is presented and simulated numerically. The results show that, in comparison with an existing traditional synthetic jet actuator, which is able to perform the duty of either ＂push＂ or ＂pull＂, one novel synthetic jet actuator can fulfill both ＂push＂ and ＂pull＂ functions to vector the primary jet by shifting a slide block inside it. Therefore, because the new actuator possesses greater efficiency, it has potentiality to replace the existing one in various appli- cations, such as thrust vectoring and the reduction of thermal signature. Moreover, as the novel actuator can fulfill those functions that the existing one can not, it may well be expected to popularize it into more flow control systems.
基金co-supported by the National Natural Science Foundation of China(Nos.11972369 and 11872374)the Youth Science and Technology Innovation Award funded project of National University of Defense Technology,China(434517314).
文摘The Dual Synthetic Jet Actuator(DSJA) is used to develop a new type of lift enhancement device based on circulation control, and to control the flow over the two-dimensional(2D)NACA0015 airfoil. The lift enhancement device is composed of a DSJA and a rounded trailing edge(Coanda surface). The two outlets of the DSJA eject two jets(Jet 1 and Jet 2). Jet 1 ejects from the upper trailing edge, which increases the circulation of airfoil with the help of the Coanda surface. Jet2 ejects from the lower trailing edge, which acts as a virtual flap. The Reynolds number based on the airfoil chord length and free flow velocity is 250000. The results indicate that the circulation control method based on Dual Synthetic Jet(DSJ) has good performance in lift enhancement, whose control effect is closely related to momentum coefficient and reduced frequency. With the increase of the reduced frequency, the control effect of the lift enhancement is slightly reduced. As the momentum coefficient increases, the control effect becomes better. When the angle of attack is greater than 4°, the increments of lift coefficients under the control of DSJ are larger than those under the control of the steady blowing at a same momentum coefficient. The maximum lift augmentation efficiency can reach 47 when the momentum coefficient is 0.02, which is higher than the value in the case with steady blowing jet circulation control.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11175157)the Young Scientists Fund ofthe National Natural Science Foundation of China (Grant No. 11005151)+1 种基金the Natural Science Foundation of Zhejiang Province,China (Grant No. Y6100045)the Project for Zhejiang Provincial Key Innovation Team,China (Grant No. 2012R10038)
文摘A simple dielectric barrier discharge（DBD） jet array was designed with a liquid electrode and helium gas.The characteristics of the jet array discharge and the preliminary polymerization with acrylic acid（AA） monomer were presented.The plasma reactor can produce a cold jet array with a gas temperature lower than 315 K,using an applied discharge power between 6 W and 30 W（V dis × I dis）.A silk fibroin film（SFF） was modified using the jet array and AA monomer,and the treated SFF samples were characterized by atomic force microscopy（AFM）,scanning electron microscopy（SEM）,Fourier transform infrared spectroscopy（FTIR）,and contact angle（CA）.The deposition rate of the poly acrylic acid（PAA） was able to reach 300 nm/min,and the surface roughness and energy increased with the AA flow rate.The FTIR results indicate that the modified SFF had more carboxyl groups（-COOH） than the original SFF.This latter characteristic allowed the modified SFF to immobilize more quantities of antimicrobial peptide（AP,LL-37） which inhibited the Escherichia coli（E.Coli） effectively.
文摘The low latitude easterlies at 200 hPa in summer (May-October) is analysed climatically during the 13-year period from 1968 to 1980, with a special emphasis on the relationships between the anomalous tropical easterly jet Stream over South Asia and the low latitude atmospheric circulation, and also the summer monsoon precipitation in India. The compositing analysis shows that the tropical easterly jet stream over South Asia has five anomalous patterns at 200 hPa i.e. the western pattern, middle pattern, eastern pattern, two-branch pattern and multi-core pattern. Evidence has shown that the precipitaion in India anomalously increased during the anomalous period of the western pattern and the middle pattern, but reverse case is true in the eastern pattern. Some different anomalies of the precipitation in different area of India were found during the other two anomalous pattern.
基金supported in part by National Natural Science Foundation of China (Grant No. 51677105)Key project of Shenzhen Technology Innovation Plan (JSGG20170412151407005)
文摘An atmospheric-pressure plasma jet array specially designed for HTV silicone rubber treatment is reported in this paper. Stable plasma containing highly energetic active particles was uniformly generated in the plasma jet array. The discharge pattern was affected by the applied voltage. The divergence phenomenon was observed at low gas flow rate and abated when the flow rate increased.Temperature of the plasma plume is close to room temperature which makes it feasible for temperature-sensitive material treatment. Hydrophobicity of contaminated HTV silicone rubber was significantly improved after quick exposure of the plasma jet array, and the effective treatment area reached 120 mm？×？50 mm（length？×？width）. Reactive particles in the plasma accelerate accumulation of the hydrophobic molecules, namely low molecular weight silicone chains, on the contaminated surface, which result in a hydrophobicity improvement of the HTV silicone rubber.
基金National Natural Science Foundation of China(No.61971345)the Foundation for Key Laboratories of National Defense Science and Technology of China(No.614220120030810).
文摘The primary issue regarding the plasma synthetic jet actuator(PSJA)is its performance attenuation at high frequencies.To solve this issue,a self-supplementing,dual-cavity,plasma synthetic jet actuator(SD-PSJA)is designed,and the static properties of the SD-PSJA are investigated through experiments and numerical simulations.The pressure measurement shows that the SD-PSJA has two saturation frequencies(1200 Hz and 2100 Hz),and the experimental results show that both the saturation frequencies decrease as the volume of the bottom cavity of the SD-PSJA increases.As the size of the supplement hole increases,the first saturation frequency increases continuously,while the second saturation frequency shows a trend of first decreasing and then increasing.Numerical simulations show that the working process of the SD-PSJA is similar to that of the PSJA,but the volume of the cavity in the SD-PSJA is smaller than that of the PSJA;the SD-PSJA can supplement air to the top cavity through two holes,thus reducing the refresh time and effectively improving the jet intensity of the actuator at high frequencies.
基金partially supported by the National Natural Science Foundation of China (Grants 11988102, 11521202, 11832001, and 11890681)
文摘In this paper,we propose a stable heat jet approach for accurate temperature control of the nonlinear Fermi-Pasta-Ulam beta(FPU-β)chain.First,we design a stable nonlinear boundary condition,with co-efficients determined by a machine learning technique.Its stability can be proved rigorously.Based on this stable boundary condition,we derive a two-way boundary condition complying with phonon heat source,and construct stable heat jet approach.Numerical tests illustrate the stability of the boundary condition and the effectiveness in eliminating boundary reflections.Furthermore,we extend the bound-ary condition formulation with more atoms,and train the coefficients to eliminate extreme short waves by machine learning technique.Under this extended boundary condition,the heat jet approach is effec-tive for high temperature,and may be adopted for multiscale computation of atomic motion at finite temperature.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51407197,51522606,51336011,91541120,and 11472306)
文摘Plasma synthetic jet actuator（PSJA） has a wide application prospect in the high-speed flow control field for its high jet velocity.In this paper,the influence of the air pressure on the performance of a two-electrode PSJA is investigated by the schlieren method in a large range from 7 k Pa to 100 k Pa.The energy consumed by the PSJA is roughly the same for all the pressure levels.Traces of the precursor shock wave velocity and the jet front velocity vary a lot for different pressures.The precursor shock wave velocity first decreases gradually and then remains at 345 m/s as the air pressure increases.The peak jet front velocity always appears at the first appearance of a jet,and it decreases gradually with the increase of the air pressure.A maximum precursor shock wave velocity of 520 m/s and a maximum jet front velocity of 440 m/s are observed at the pressure of 7 k Pa.The averaged jet velocity in one period ranges from 44 m/s to 54 m/s for all air pressures,and it drops with the rising of the air pressure.High velocities of the precursor shock wave and the jet front indicate that this type of PSJA can still be used to influence the high-speed flow field at 7 k Pa.
基金supported by the National Natural Science Foundation of China(Grant Nos.41130963,41105044,and 41105045)the National Basic Research and Development(973)Program of China(Grant No.2012CB955901)the Research Fund for the Doctoral Program of Higher Education(Grant No.20100091110003)
文摘The major features of the westerly jets in boreal winter, consisting of the Middle East jet stream （MEJS）, East Asian jet stream （EAJS） and North Atlantic jet stream （NAJS）, simulated by a newly developed climate system model, were evaluated with an emphasis on the meridional location of the westerly jet axis （WJA）. The model was found to exhibit fairly good performance in simulating the EAJS and NAJS, whereas the MEJS was much weaker and indistinguishable in the model. Compared with the intensity bias, the southward shift of the WJA seems to be a more remarkable deficiency. From the perspective of Ertel potential vorticity, the profiles along different westerly jet cores in the model were similar with those in the reanalysis but all shifted southward, indicating an equatorward displacement of the dynamic tropopause and associated climatology. Diagnosis of the thermodynamic equation revealed that the model produced an overall stronger heating source and the streamfunction quantifying the convection and overturning Hadley circulation shifted southward significantly in the middle and upper troposphere. The two maximum centers of eddy kinetic energy, corresponding to the EAJS and NAJS, were reproduced, whereas they all shifted southwards with a much reduced intensity. A lack of transient eddy activity will reduce the efficiency of poleward heat transport, which may partially contribute to the meridionally non-uniform cooling in the middle and upper troposphere. As the WJA is closely related to the location of the Hadley cell, tropopause and transient eddy activity, the accurate simulation of westerly jets will greatly improve the atmospheric general circulation and associated climatology in the model.
基金the sponsorship of National Natural Science Foundation of China(21878099)Science and Technology Commission of Shanghai Municipality(19DZ1208000)。
文摘In the titanium dioxide industry,there is a lack of a low-cost and high-efficiency treatment method for chloride containing tail gas.In this paper,the removal of HCl from the titanium dioxide industry by gas cyclone-liquid jet separator was studied,while Ca(OH)_(2),Na_(2)CO_(3),NaOH solution,and water were used as absorbents.This paper investigated the influence of gas cyclone-liquid jet separator’s various process parameters on the removal rate of hydrogen chloride gas.The mechanism of mass transfer in the process of removing hydrogen chloride was discussed,and the effect and feasibility of HCl gas removal in the gas cyclone-liquid jet absorption separator were studied.The results showd that the removal efficiency of hydrogen chloride maintained above 95%,up to 99.9%,and the total mass transfer coefficient reached0.28 mol·m^(-3)·s^(-1)·k Pa^(-1).Under the same conditions,the absorption effect and total mass transfer coefficient of weak basic absorption liquid can be greatly improved by increasing the flow rate of absorption liquid,but the absorption effect and total mass transfer coefficient of strong alkaline absorption liquid can’t be improved obviously.The larger the inlet gas volume,the higher the gas concentration,the lower the absorption efficiency and the lower the total volumetric mass transfer coefficient.
基金the Natural Science Foundation of Liaoning Province(Grant No.20032115)
文摘Based on the stress-algebraic model, the turbulent buoyant jet with variable density was studied by the relation between density and concentration. A simple expression for buoyancy coefficient was proposed. The governing equations of turbulent buoyant jet with variable density were closed by introducing the expression of β and the relation between density and concentration. Numerical results for the jet axis with density difference agree well with experimental ones. By finite volume method, the 2 - D vertical jet＇s flow field with different jet angles was studied. The analysis of the relation among the vortex center, the position of separation point and jet angles shows that the circumfluenee field is the largest when the jet angle is 90°. The area turbulent kinetic energy ka is proposed and the relationship between mixing intensity and jet angles is analyzed based on it. Results show that the jet angle of is the optimum condition for jet water mixing with environment water;and the reduced rate of difference between the centerline density of jet and the density of ambient water is the largest at the jet angle of 90°.
文摘The intensification of a low-level jet off the Somali coast, as observed through GOES (I-O) satellite during Indian summer monsoon 1979 has been studied. Excitation of Low-level cross-equatorial flow in the western Indian ocean results from an interaction between extratropical perturbations moving eastward across the South African-Malgassy region of the Southern Hemisphere. This excitation occurs 2-3 days after the first appearance of a northward propagation cold front across the South African-Malgassy region. Inten-sification of cross-equatorial flow is followed by an increase in rainfall activity along the west coast of India after 3-4 days. The study reveals that this association can be used to forecast an increase in rainfall activity along the west coast of India 5-7 days in advance.
文摘As an active flow control technology and with the advantages of no moving components, the Sweeping jet actuator has become a hotspot in the field of flow control. However, the linear relationship between oscillation frequency and momentum coefficient in a sweeping jet actuator makes it difficult to determine the dominant factors that affect control effectiveness. Decoupling the oscillation frequency and momentum coefficient, as well as determining the control mechanism, is the focus of studying the sweeping jet actuator. In this study, a novel sweeping jet actuator is designed using synthetic jets instead of feedback channels and applied to the flow separation control of NACA0018 airfoil. This article studies the control effect under three oscillation frequencies of F<sup>+</sup> = f × c/U<sub>∞</sub> = 1, 10, 100 and three momentum coefficients of C<sub>μ</sub> = 0.45%, 0.625%, 0.9%. The numerical results indicate that all three oscillation frequencies have good control effects on flow separation, and the control effect is best when F<sup>+</sup> = 1, with the maximum lift coefficient increasing by approximately 14% compared to the other two cases. And the sweeping jet actuator has a better ability to control flow separation as the momentum coefficient increases. By decoupling the characteristics of the sweeping jet actuator and conducting numerical analysis of the flow control effect, it will promote its better engineering application in the field of flow control. .
