In order to enhance the stability of single-phase microgrid,virtual synchronous generator(VSG)control method is investigated in this paper.Its electromagnetic model and electromechanical model are established to illus...In order to enhance the stability of single-phase microgrid,virtual synchronous generator(VSG)control method is investigated in this paper.Its electromagnetic model and electromechanical model are established to illustrate the performance of VSG.Considering the 2 nd fluctuation of fundamental-frequency in the output power,an instantaneous power calculation strategy is proposed based on the intrinsic frequency of single-phase VSG.Besides,a virtual power calculation method is presented to achieve islanded/grid-connected seamless transition.Stability analysis and comparison simulation results demonstrate the correctness of the presented power calculation method.At last,the effectiveness of the proposed approach is verified by comparison experiments of islanded/gridconnected operations in a 500 VA single-phase inverter.展开更多
Droplet-based electricity generators (DEGs) leveraging triboelectric effects are simple and high-performance devices for harvesting energy from ubiquitous water droplets. Instantaneous power plays a vital role in wide...Droplet-based electricity generators (DEGs) leveraging triboelectric effects are simple and high-performance devices for harvesting energy from ubiquitous water droplets. Instantaneous power plays a vital role in wide applications of DEGs. However, the governing law of the maximum instantaneous power and matching resistance is lacking and their determination suffers from heavy repetitive experiments, hindering the development of DEGs. Herein, we propose a quick evaluation method for the internal droplet impedance, instantaneous peak power, maximum instantaneous power and matching resistance which exhibits broad universality and excellent accuracy. Moreover, effects of diverse factors pertaining to droplets and devices are fully investigated, highlighting that the maximum instantaneous power and matching resistance can be effectively regulated across multiple orders of magnitudes by controlling the salt concentration. Our findings shed insights into the understanding, evaluation, and regulation of instantaneous power for DEGs, and shall promote the renovation of the DEG technology.展开更多
This paper first discusses the operating principle of instantaneous reactive power theory. Then, the theory is introduced into shunt active power filter and its control scheme is studied. Finally, Matlab/Simulink powe...This paper first discusses the operating principle of instantaneous reactive power theory. Then, the theory is introduced into shunt active power filter and its control scheme is studied. Finally, Matlab/Simulink power system toolbox is used to simulate the system. In the simulation model, as the most common harmonic source, 3-phase thyristor bridge rectifier circuit is constructed. The simulation results before and after the shunt active filter was switched to the system corresponding to different firing angles of the thyristors are presented and analyzed, which demonstrate the practicability and reliability of the proposed shunt active filter scheme.展开更多
For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous act...For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.展开更多
This paper describes two methods of representation of voltages and currents in electric circuits： in the vector form and in the shape of oscillations, represented as diagrams in the plane. The appropriate power compo...This paper describes two methods of representation of voltages and currents in electric circuits： in the vector form and in the shape of oscillations, represented as diagrams in the plane. The appropriate power components are discussed depending on the representation of voltages and currents. Special attention is paid to the instantaneous power peculiarities for diverse loads and non-sinusoidal conditions. A case study of power calculations in an electric circuit with a pluggable capacitor is presented. For these types of transient modes, the instantaneous power is represented in the form of active and reactive components. Calculation of active, reactive, and exchange powers for steady-state processes is presented.展开更多
Inevitably, the question of reactive power compensation was aroused by applied of power electronics. Based on the study of the instantaneous reactive power theory, the designs of TCR(thyristor control reactor) thyrist...Inevitably, the question of reactive power compensation was aroused by applied of power electronics. Based on the study of the instantaneous reactive power theory, the designs of TCR(thyristor control reactor) thyristor control reactor reac- tive power compensation system and TCR single closed loop strategy was pro- posed. In addition, as digital simulation software, Arene was applied to simulate the Jining coal mine No.2 system. The simulation results validate that the design is effective to improve power factor and stabilization of the system.展开更多
In this paper, a multiplexing technique is applied on a neural harmonics extraction method, based on an efficient formulation of the instantaneous reactive power theory. This approach can be used in nonlinear loads co...In this paper, a multiplexing technique is applied on a neural harmonics extraction method, based on an efficient formulation of the instantaneous reactive power theory. This approach can be used in nonlinear loads compensation with APFs （Active Power Filters）. The architecture for reference current generation, synchronized by a neural phase lock-loop, is composed of three Adaline neural networks. This leads to an important consumption of field programmable gate array resources during implementation. The proposed technique uses only one Adaline and keeps the immunity of the approach under non-sinusoidal and unbalanced conditions of voltage. Simulation results of the neural harmonics detection system connected to a reference current controller show balanced and sinusoidal source currents under various conditions. Results with experimental measurement made on an APF test bench demonstrate its good performances on harmonics filtering. Moreover, the simplified structure from the new approach called mp-q method shows a significant resource reduction.展开更多
This paper presents a mathematical model of three-level voltage PWM rectifier,and derives a power control model from the theory of instantaneous power.In the vector-space,the influences on instantaneous power exercise...This paper presents a mathematical model of three-level voltage PWM rectifier,and derives a power control model from the theory of instantaneous power.In the vector-space,the influences on instantaneous power exercised by all the switching vectors are studied and illustrated separately,then a direct power control(DPC) scheme for three-level PWM rectifier which uses multistage band hysteresis comparator is proposed,and a novel switching table is designed.Meanwhile,the neutralpoint voltage unbalance is inhibited by selecting the redundancy switching states of small voltage vectors.Simulation and experimental results show that the proposed strategy can not only stabilize the DC bus voltage but also realize the unity power factor operation and the balance of neutral-point voltage.Moreover,the proposed method can improve the performance of the three-level rectifier.展开更多
A novel ultra low-voltage,low-power baseband-processor for UHF radio frequency identification(RFID)tag is presented here.The baseband-processor is compatible with the EPC^(TM) class-1 generation-2(C1G2)UHF RFID protoc...A novel ultra low-voltage,low-power baseband-processor for UHF radio frequency identification(RFID)tag is presented here.The baseband-processor is compatible with the EPC^(TM) class-1 generation-2(C1G2)UHF RFID protocol,and fits the requirements of ultra low-power of passive tags.Based on the analysis of the special power consumption of the tag,a new architecture is proposed.A novel scheme for generating pseudo-random numbers as well as a new method of partial-decoding is developed.Besides,other low-power techniques are also adopted for the special baseband-processor which implements complex functions,such as encoding/coding,anti-collision and authorization scheme,and reading/writing operation to EEPROM.The chip was fabricated in 0.35 μm 1P3M standard CMOS process.Experimental results show that it achieves low power operation of 3.15 μW@1.5 V with the core area of 1.1 mm×0.8 mm.展开更多
Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clear...Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.展开更多
The paper presents development of a reinforcement learning(RL)and sliding mode control(SMC)algorithm for a 3-phase PV system integrated to a grid.The PV system is integrated to grid through a voltage source inverter(V...The paper presents development of a reinforcement learning(RL)and sliding mode control(SMC)algorithm for a 3-phase PV system integrated to a grid.The PV system is integrated to grid through a voltage source inverter(VSI),in which PVVSI combination supplies active power and compensates reactive power of the local non-linear load connected to the point of common coupling(PCC).For extraction of maximum power from the PV panel,we develop a RL based maximum power point tracking(MPPT)algorithm.The instantaneous power theory(IPT)is adopted for generation reference inverter current(RIC).An SMC algorithm has been developed for injecting current to the local non-linear load at a reference value.The RL-SMC scheme is implemented in both simulation using MATLAB/SIMULINK software and on a prototype PV experimental.The performance of the proposed RL-SMC scheme is compared with that of fuzzy logic-sliding mode control(FL-SMC)and incremental conductance-sliding mode control(IC-SMC)algorithms.From the obtained results,it is observed that the proposed RL-SMC scheme provides better maximum power extraction and active power control than the FL-SMC and IC-SMC schemes.展开更多
This paper deals with the analysis and control of a photovoltaic （PV） system connected to the main supply through a Boost converter and shunt active filter supplied by a PV system providing continuous supply of nonl...This paper deals with the analysis and control of a photovoltaic （PV） system connected to the main supply through a Boost converter and shunt active filter supplied by a PV system providing continuous supply of nonlinear load in variation. A robust control of a PV system connected to the grid while feeding a variable nonlinear load is developed and highlighted. This development is based on the control of the Boost converter to extract the maximum power from the PV system using the Perturb and Observe （P and O） algorithm in the presence of temperature and illumination. The proposed modeling and control strategy provide power to the variable nonlinear load and facilitates the transfer of power from solar panel to the grid while improving the quality of energy （harmonic currents compensation, power factor compensation and dc bus voltage regulation）. Validation of the developed model and control strategy is conducted using power system simulator Sim-Power System Blockset Matlab/Simulink. To demonstrate the effectiveness of the shunt active filter to load changes, the method of instantaneous power （pq theory） is used to identify harmonic currents. The obtained results show an accurate extraction of harmonic currents and perfect compensation of both reactive power and harmonic currents with a lower THD and in accordance with the IEEE-519 standard.展开更多
This article investigates the significant performances of orthogonal frequency division multiplexing （OFDM）-based dual-hop system in the presence of phase noise （PN）. A scenario with Rayleigh fading statistics on ...This article investigates the significant performances of orthogonal frequency division multiplexing （OFDM）-based dual-hop system in the presence of phase noise （PN）. A scenario with Rayleigh fading statistics on both hops is assumed. Amplification factor for this amplify-and-forward （AF） relay networks system is divided into two conditions, average power scaling （APS） and instantaneous power scaling （IPS）. Before deriving signal-to-noise ratios （SNR） under APS and IPS, the Gaussianity of intercarrier interference （ICI） is proved firstly. The accurate closed-form expressions of end-to-end SNR cumulative distribution functions （CDF） and probability density functions （PDF） for both cases are obtained later. With the help of moment generating functions （MGF）, we have closed-form asymptotic expressions of bit error rate （BER）, which show that the BER of system in the presence of PN cannot exceed a fixed level even when SNR in high regime. Finally, simulations verify accuracy of the results. Conclusion analysis will provide a useful help in future application of the system.展开更多
基金supported by the National Basic Research Program of China(973 Program)(No.2013CB02708201)
文摘In order to enhance the stability of single-phase microgrid,virtual synchronous generator(VSG)control method is investigated in this paper.Its electromagnetic model and electromechanical model are established to illustrate the performance of VSG.Considering the 2 nd fluctuation of fundamental-frequency in the output power,an instantaneous power calculation strategy is proposed based on the intrinsic frequency of single-phase VSG.Besides,a virtual power calculation method is presented to achieve islanded/grid-connected seamless transition.Stability analysis and comparison simulation results demonstrate the correctness of the presented power calculation method.At last,the effectiveness of the proposed approach is verified by comparison experiments of islanded/gridconnected operations in a 500 VA single-phase inverter.
基金financial support from the China Postdoctoral Science Foundation(No.2023TQ0210)the Postdoctoral Fellowship Program of CPSF(No.GZB20230403)+1 种基金the Fundamental Research Funds for the Central Universities(Shanghai Jiao Tong University)the Innovative Research Groups of the National Natural Science Foundation of China(No.51521004)。
文摘Droplet-based electricity generators (DEGs) leveraging triboelectric effects are simple and high-performance devices for harvesting energy from ubiquitous water droplets. Instantaneous power plays a vital role in wide applications of DEGs. However, the governing law of the maximum instantaneous power and matching resistance is lacking and their determination suffers from heavy repetitive experiments, hindering the development of DEGs. Herein, we propose a quick evaluation method for the internal droplet impedance, instantaneous peak power, maximum instantaneous power and matching resistance which exhibits broad universality and excellent accuracy. Moreover, effects of diverse factors pertaining to droplets and devices are fully investigated, highlighting that the maximum instantaneous power and matching resistance can be effectively regulated across multiple orders of magnitudes by controlling the salt concentration. Our findings shed insights into the understanding, evaluation, and regulation of instantaneous power for DEGs, and shall promote the renovation of the DEG technology.
文摘This paper first discusses the operating principle of instantaneous reactive power theory. Then, the theory is introduced into shunt active power filter and its control scheme is studied. Finally, Matlab/Simulink power system toolbox is used to simulate the system. In the simulation model, as the most common harmonic source, 3-phase thyristor bridge rectifier circuit is constructed. The simulation results before and after the shunt active filter was switched to the system corresponding to different firing angles of the thyristors are presented and analyzed, which demonstrate the practicability and reliability of the proposed shunt active filter scheme.
文摘For three phase four-wire active power filters （APFs）, several typical power theories and corresponding current reference generation strategies are induced, p-q, d-q, unify power factor （UPF） and instantaneous active current （IAC） methods are analyzed and compared with each other. The interpretation of active and reactive currents in non-sinusoidal and unbalanced three-phase four-wire systems is given based on the generalized instantaneous reactive power theory. The performance and the characteristic are evaluated, and the application conditions of current reference generation strategies are concluded. Simulation results under different source voltages and loads verify the evaluation result.
文摘This paper describes two methods of representation of voltages and currents in electric circuits： in the vector form and in the shape of oscillations, represented as diagrams in the plane. The appropriate power components are discussed depending on the representation of voltages and currents. Special attention is paid to the instantaneous power peculiarities for diverse loads and non-sinusoidal conditions. A case study of power calculations in an electric circuit with a pluggable capacitor is presented. For these types of transient modes, the instantaneous power is represented in the form of active and reactive components. Calculation of active, reactive, and exchange powers for steady-state processes is presented.
文摘Inevitably, the question of reactive power compensation was aroused by applied of power electronics. Based on the study of the instantaneous reactive power theory, the designs of TCR(thyristor control reactor) thyristor control reactor reac- tive power compensation system and TCR single closed loop strategy was pro- posed. In addition, as digital simulation software, Arene was applied to simulate the Jining coal mine No.2 system. The simulation results validate that the design is effective to improve power factor and stabilization of the system.
文摘In this paper, a multiplexing technique is applied on a neural harmonics extraction method, based on an efficient formulation of the instantaneous reactive power theory. This approach can be used in nonlinear loads compensation with APFs （Active Power Filters）. The architecture for reference current generation, synchronized by a neural phase lock-loop, is composed of three Adaline neural networks. This leads to an important consumption of field programmable gate array resources during implementation. The proposed technique uses only one Adaline and keeps the immunity of the approach under non-sinusoidal and unbalanced conditions of voltage. Simulation results of the neural harmonics detection system connected to a reference current controller show balanced and sinusoidal source currents under various conditions. Results with experimental measurement made on an APF test bench demonstrate its good performances on harmonics filtering. Moreover, the simplified structure from the new approach called mp-q method shows a significant resource reduction.
基金supported by the Key Program of National Natural Science Foundation of China (Grant No. 51037004)the National Natural Science Foundation of China (Grant No. 51077097)the Key Technologies Research and Development Program of Tianjin (Grant No.11ZCKFGX03300)
文摘This paper presents a mathematical model of three-level voltage PWM rectifier,and derives a power control model from the theory of instantaneous power.In the vector-space,the influences on instantaneous power exercised by all the switching vectors are studied and illustrated separately,then a direct power control(DPC) scheme for three-level PWM rectifier which uses multistage band hysteresis comparator is proposed,and a novel switching table is designed.Meanwhile,the neutralpoint voltage unbalance is inhibited by selecting the redundancy switching states of small voltage vectors.Simulation and experimental results show that the proposed strategy can not only stabilize the DC bus voltage but also realize the unity power factor operation and the balance of neutral-point voltage.Moreover,the proposed method can improve the performance of the three-level rectifier.
基金This work was supported by the National High Technology Research and Development Program of China(No.2003AA1Z1280).
文摘A novel ultra low-voltage,low-power baseband-processor for UHF radio frequency identification(RFID)tag is presented here.The baseband-processor is compatible with the EPC^(TM) class-1 generation-2(C1G2)UHF RFID protocol,and fits the requirements of ultra low-power of passive tags.Based on the analysis of the special power consumption of the tag,a new architecture is proposed.A novel scheme for generating pseudo-random numbers as well as a new method of partial-decoding is developed.Besides,other low-power techniques are also adopted for the special baseband-processor which implements complex functions,such as encoding/coding,anti-collision and authorization scheme,and reading/writing operation to EEPROM.The chip was fabricated in 0.35 μm 1P3M standard CMOS process.Experimental results show that it achieves low power operation of 3.15 μW@1.5 V with the core area of 1.1 mm×0.8 mm.
文摘Dynamic reactive power compensation equipment typically requires a fast response to output the necessary reactive power.The term"dynamic response time of reactive power"is often used but has never been clearly defined.This paper summarizes the reactive power calculations under different definitions and algorithms and considers these calculations in terms of signal processing to simulate and analyze the step response.This paper subsequently focuses on the widely used instantaneous reactive power algorithm and finally concludes that the dynamic reactive power response time closely depends on the reactive power calculation method itself.The single-phase instantaneous reactive power algorithm has the fastest response time.The reactive power response time of dynamic reactive devices in power systems is a minimum of a quarter of one cycle time for the well-known and widely used single-phase reactive power algorithms.
文摘The paper presents development of a reinforcement learning(RL)and sliding mode control(SMC)algorithm for a 3-phase PV system integrated to a grid.The PV system is integrated to grid through a voltage source inverter(VSI),in which PVVSI combination supplies active power and compensates reactive power of the local non-linear load connected to the point of common coupling(PCC).For extraction of maximum power from the PV panel,we develop a RL based maximum power point tracking(MPPT)algorithm.The instantaneous power theory(IPT)is adopted for generation reference inverter current(RIC).An SMC algorithm has been developed for injecting current to the local non-linear load at a reference value.The RL-SMC scheme is implemented in both simulation using MATLAB/SIMULINK software and on a prototype PV experimental.The performance of the proposed RL-SMC scheme is compared with that of fuzzy logic-sliding mode control(FL-SMC)and incremental conductance-sliding mode control(IC-SMC)algorithms.From the obtained results,it is observed that the proposed RL-SMC scheme provides better maximum power extraction and active power control than the FL-SMC and IC-SMC schemes.
文摘This paper deals with the analysis and control of a photovoltaic （PV） system connected to the main supply through a Boost converter and shunt active filter supplied by a PV system providing continuous supply of nonlinear load in variation. A robust control of a PV system connected to the grid while feeding a variable nonlinear load is developed and highlighted. This development is based on the control of the Boost converter to extract the maximum power from the PV system using the Perturb and Observe （P and O） algorithm in the presence of temperature and illumination. The proposed modeling and control strategy provide power to the variable nonlinear load and facilitates the transfer of power from solar panel to the grid while improving the quality of energy （harmonic currents compensation, power factor compensation and dc bus voltage regulation）. Validation of the developed model and control strategy is conducted using power system simulator Sim-Power System Blockset Matlab/Simulink. To demonstrate the effectiveness of the shunt active filter to load changes, the method of instantaneous power （pq theory） is used to identify harmonic currents. The obtained results show an accurate extraction of harmonic currents and perfect compensation of both reactive power and harmonic currents with a lower THD and in accordance with the IEEE-519 standard.
基金supported by the Fundamental Research Funds for the Central Universities of China (TD2014-01)
文摘This article investigates the significant performances of orthogonal frequency division multiplexing （OFDM）-based dual-hop system in the presence of phase noise （PN）. A scenario with Rayleigh fading statistics on both hops is assumed. Amplification factor for this amplify-and-forward （AF） relay networks system is divided into two conditions, average power scaling （APS） and instantaneous power scaling （IPS）. Before deriving signal-to-noise ratios （SNR） under APS and IPS, the Gaussianity of intercarrier interference （ICI） is proved firstly. The accurate closed-form expressions of end-to-end SNR cumulative distribution functions （CDF） and probability density functions （PDF） for both cases are obtained later. With the help of moment generating functions （MGF）, we have closed-form asymptotic expressions of bit error rate （BER）, which show that the BER of system in the presence of PN cannot exceed a fixed level even when SNR in high regime. Finally, simulations verify accuracy of the results. Conclusion analysis will provide a useful help in future application of the system.
