Because of the end effect, a linear induction motor （LIM） runs in an asymmetrical state even though the winding of each phase is symmetric. Based on the basic principle of the LIM, a new approach was proposed to cal...Because of the end effect, a linear induction motor （LIM） runs in an asymmetrical state even though the winding of each phase is symmetric. Based on the basic principle of the LIM, a new approach was proposed to calculate the thrust of the LIM using the instantaneous current value. A three-phase LIM model with 12 slots and a singlelayer winding was designed to validate this method. The experiments show that when the current is small, the calculated results basically agree with the experiments. The agreement becomes worse with the increase of the current because of the saturation of the primary iron core. The proposed formula is suitable when the iron core of the LIM primary is in an unsaturated state.展开更多
Existing nanogenerator technologies for harvesting high-power energy from wind encounter significant chal-lenges due to limitations in current output.Here,we propose a rotating-switch triboelectric nanogenerator(RS-TE...Existing nanogenerator technologies for harvesting high-power energy from wind encounter significant chal-lenges due to limitations in current output.Here,we propose a rotating-switch triboelectric nanogenerator(RS-TENG)that uses mechanical triggering switches(on-off-on)to enhance the instantaneous current pulses during rotation.The rotating-switch in the proposed device addresses the issue of low instantaneous current output in triboelectric nanogenerators while maintaining voltage stability.At a constant rotational speed,the RS-TENG achieves an instantaneous current of 3.2 times that of its nonswitching counterpart,with an 89%reduction in response time.Furthermore,at a wind speed of 2 m·s^(-1),the RS-TENG achieves a wind power density of 10.4 mW·m^(-2)·m^(-1)·s.Additionally,by integrating the RS-TENG with energy management circuits,the nanogenerator can power wireless signal transmitters and temperature sensors,offering a self-sustaining power solution for remote wireless services.This research presents a promising technology for powering electronic devices in energy-scarce environments.展开更多
Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrod...Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrode and the Ni/graphite modified electrode has been carried out. The different effects of concentration, current density and temperature on the rate of degradation were studied. This study shows that the rate of the degradation is more for Ni doped modified graphite electrode. UV-Visible spectra before and after degradation of the dye solution were observed. The thin film formation of Ni or encapsulated in graphite rod is observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM & EDAX). The instantaneous current effectiveness values of different experimental conditions are evaluated. The anodic oxidation by Ni/ graphite modified electrode showed the complete degradation of aqueous solution indigocarmine, which is confirmed by UV-Visible and chemical oxygen demand (COD) measurements. The dye is converted into CO2, H2O and simpler inorganic salts. The results observed for reuse of modified electrodes indicate that the Ni/graphite modified electrode would be a promising anode for electrochemical degradation of indigocarmine. This method can be applied for the remediation of waste water containing organics, cost-effective and simple.展开更多
Voltage sag is one of the most common power quality disturbances in industry,which causes huge inrush currents in stator windings of induction motors,and adversely impacts the motor secure operation.This paper firstly...Voltage sag is one of the most common power quality disturbances in industry,which causes huge inrush currents in stator windings of induction motors,and adversely impacts the motor secure operation.This paper firstly introduces a 2D Time-Stepping multi-slice finite element method(2D T-S multi-slice FEM)which is used for calculating the magnetic field distribution in induction motors under different sag events.Then the paper deduces the transient analytical expression of stator inrush current based on the classical theory of AC motors and presents a separation method for the positive,negative and zero sequence values based on instantaneous currents.With this method,the paper studies the influences of voltage sag amplitude,phase-angle jump and initial phase angle on the stator positive-and negative-sequence peak currents of 5.5 kW and 55 kW induction motors.This paper further proposes a motor protection method under voltage sag condition with the stator negative-sequence peak currents as the protection threshold,so that the protection false trip can be avoided effectively.Finally,the calculation and analysis results are validated by the comparison of calculated and measured stator peak value of the 5.5 kW induction motor.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 50588201,50672078, and 50872116)the National Basic Research Program (973 program, No. 2007CB616906)+1 种基金the Australian Research Council (Grant No. DP0559872 and DP0881739)the PCSIRT of the Ministry of Education of China (No. IRT0751)
文摘Because of the end effect, a linear induction motor （LIM） runs in an asymmetrical state even though the winding of each phase is symmetric. Based on the basic principle of the LIM, a new approach was proposed to calculate the thrust of the LIM using the instantaneous current value. A three-phase LIM model with 12 slots and a singlelayer winding was designed to validate this method. The experiments show that when the current is small, the calculated results basically agree with the experiments. The agreement becomes worse with the increase of the current because of the saturation of the primary iron core. The proposed formula is suitable when the iron core of the LIM primary is in an unsaturated state.
基金financially supported by the National Natural Science Foundation of China(Grant No.62431006)the Inner Mongolia Major Science and Technology Project(Grant No.2020ZD0024)+2 种基金Local Science and Technology Development Project of the Central Government(Grant Nos.2021ZY0006,2022ZY0011)Natural Science Foundation of Inner Mongolia(Grant No.2024LHMS05046)Inner Mongolia Autonomous Region Key Research and Technological Achievements Transformation Plan Project(Grant No.2023YFHH0063).
文摘Existing nanogenerator technologies for harvesting high-power energy from wind encounter significant chal-lenges due to limitations in current output.Here,we propose a rotating-switch triboelectric nanogenerator(RS-TENG)that uses mechanical triggering switches(on-off-on)to enhance the instantaneous current pulses during rotation.The rotating-switch in the proposed device addresses the issue of low instantaneous current output in triboelectric nanogenerators while maintaining voltage stability.At a constant rotational speed,the RS-TENG achieves an instantaneous current of 3.2 times that of its nonswitching counterpart,with an 89%reduction in response time.Furthermore,at a wind speed of 2 m·s^(-1),the RS-TENG achieves a wind power density of 10.4 mW·m^(-2)·m^(-1)·s.Additionally,by integrating the RS-TENG with energy management circuits,the nanogenerator can power wireless signal transmitters and temperature sensors,offering a self-sustaining power solution for remote wireless services.This research presents a promising technology for powering electronic devices in energy-scarce environments.
文摘Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrode and the Ni/graphite modified electrode has been carried out. The different effects of concentration, current density and temperature on the rate of degradation were studied. This study shows that the rate of the degradation is more for Ni doped modified graphite electrode. UV-Visible spectra before and after degradation of the dye solution were observed. The thin film formation of Ni or encapsulated in graphite rod is observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM & EDAX). The instantaneous current effectiveness values of different experimental conditions are evaluated. The anodic oxidation by Ni/ graphite modified electrode showed the complete degradation of aqueous solution indigocarmine, which is confirmed by UV-Visible and chemical oxygen demand (COD) measurements. The dye is converted into CO2, H2O and simpler inorganic salts. The results observed for reuse of modified electrodes indicate that the Ni/graphite modified electrode would be a promising anode for electrochemical degradation of indigocarmine. This method can be applied for the remediation of waste water containing organics, cost-effective and simple.
基金This work was supported in part by the National Natural Science Foundation of China under Grant51307050。
文摘Voltage sag is one of the most common power quality disturbances in industry,which causes huge inrush currents in stator windings of induction motors,and adversely impacts the motor secure operation.This paper firstly introduces a 2D Time-Stepping multi-slice finite element method(2D T-S multi-slice FEM)which is used for calculating the magnetic field distribution in induction motors under different sag events.Then the paper deduces the transient analytical expression of stator inrush current based on the classical theory of AC motors and presents a separation method for the positive,negative and zero sequence values based on instantaneous currents.With this method,the paper studies the influences of voltage sag amplitude,phase-angle jump and initial phase angle on the stator positive-and negative-sequence peak currents of 5.5 kW and 55 kW induction motors.This paper further proposes a motor protection method under voltage sag condition with the stator negative-sequence peak currents as the protection threshold,so that the protection false trip can be avoided effectively.Finally,the calculation and analysis results are validated by the comparison of calculated and measured stator peak value of the 5.5 kW induction motor.
