This study aims to reveal the influence of Local Momentum Ratio(LMR)on the combustion efficiency of an LOX/GCH4 pintle injector from the perspective of spray characteristics.Hot fire tests were conducted to establish ...This study aims to reveal the influence of Local Momentum Ratio(LMR)on the combustion efficiency of an LOX/GCH4 pintle injector from the perspective of spray characteristics.Hot fire tests were conducted to establish the relationship between combustion efficiency and LMR.The spray characteristics for different LMRs were simulated by the validated volume of fluid-to-discrete phase model method,taking into account the combustion chamber wall confinement.Subsequently,the difference in combustion efficiency was analyzed by comparing the spray simulation results of backpressure conditions similar to hot fire tests.The results indicate that combustion efficiency increased initially(LMR=1.12-1.64)and then decreased(LMR>1.64).Quantitative analysis revealed a linear correlation(R^(2)=0.95)between LMR and combustion efficiency within 1.12<LMR<1.64.As the LMR increased,the improvement in combustion efficiency was attributed to a wider spray distribution range and smaller droplet sizes.The area of the mantle recirculation zone that is detrimental to combustion decreased by approximately 38%,and the droplet size reduced from 37 to 16μm.This effectively enhanced both the mixing of the propellant and the evaporation process.When the LMR exceeded the critical value(1.64 in this study),the impingement of liquid oxygen on the combustion chamber wall was confirmed via overheating discoloration marks on the inner surface of combustion chamber's cylindrical section.The impingement of liquid oxygen on the combustion chamber wall increased the transport of liquid oxygen to the wall,directly reducing the mixing quality and combustion efficiency.The outcomes of this study provide the practical guidance for design and improvement in combustion efficiency of the pintle injector thrust chamber.展开更多
In response to the increasing demand for hadron therapy facilities,significant efforts have been directed toward enhancing the performance of high-gradient and high-transmission injectors for light ion beams.For carbo...In response to the increasing demand for hadron therapy facilities,significant efforts have been directed toward enhancing the performance of high-gradient and high-transmission injectors for light ion beams.For carbon ion irradiations,which offer greater radiobiological efficiency in tumor treatment,recent research has focused on developing high-production sources of fully stripped C^(6+)ions and highly compact,high-frequency RFQ cavities.This study explores the design possibilities of a carbon ion acceleration section using 750 MHz Interdigital H-mode Drift Tube Linacs(IH-DTLs)as a high-efficiency solution for accelerating ions in the 5-10 MeV per nucleon energy range.A particle-tracking routine based on the TRAVEL code was developed to design the acceleration line through a tailored KONUS-type configuration.Three design solutions were proposed and compared,exploring different alternatives regarding the use of a MEBT to match the output beam phase space of the RFQ to the optics of the line,as well as varying considerations for magnetic systems to focus the beam.Additionally,the compatibility of the proposed solutions with the existing design of the carbon ion bent-linac for hadron therapy was assessed.展开更多
39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.Ar...39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.ArcGIS inverse distance weight difference method was used to analyze the characteristics of pollution distribution,and single-factor pollution index,Nemerow comprehensive pollution index,ground accumulation index,and potential ecological risk index were selected to evaluate the characteristics of heavy metal pollution.Based on correlation analysis,the absolute principal component-multiple linear regression(APCS-MLR)and positive definite matrix factorization(PMF)models were used to analyze the sources of soil heavy metals.The results showed that the average concentrations of all eight heavy metals exceeded both national and Guangxi soil background values.Hg,Cd,and Zn exhibited high variation(greater than 0.5),indicating significant external disturbances,and their spatial distribution was closely related to mining activity locations.The single-factor pollution index evaluation indicated varying degrees of pollution risk for Cd,Zn,and As,with Cd and Zn being the most severe pollutants,as 69.23%and 30.77%of the samples fell into the moderate pollution or higher category.The geoaccumulation index analysis ranked the mean pollution levels of the eight elements as follows:Zn>Cd>Ni>Pb>Cu>Cr>Hg>As,with Cd and Zn showing the most severe contamination,and 51.28%of the samples exhibiting moderate or higher pollution levels.The Nemerow comprehensive pollution index evaluation showed that 74.35%of soil samples were classified as moderate to heavy pollution.The potential ecological risk index assessment indicated significant ecological risks posed by Cd and Zn,with 82.05%and 5.12%of the samples classified as causing strong to extreme ecological risks,respectively.The source apportionment analysis revealed minor differences between the two models.The APCS-MLR model identified three pollution sources and their contribution rates:anthropogenic mining sources(31.13%),parent material sources(40.38%),and unidentified sources(28.49%).The PMF model identified three pollution sources with contribution rates of anthropogenic mining sources(26.10%),parent material sources(46.96%),and a combined traffic and agricultural source(26.61%).Pb,Hg,Cd,and Zn mainly originated from mining activities;Cr,As,and Ni were primarily derived from the parent material,while Cu was predominantly attributed to traffic and agricultural sources.These findings provide a scientific basis for the prevention and control of heavy metal pollution in mining areas.展开更多
Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced...Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.展开更多
The dependence of shrinkage porosities on microstructure characteristics of Mg−12Al alloy was investigated.The distribution,morphology,size,and number density of shrinkage porosities were analyzed under different cool...The dependence of shrinkage porosities on microstructure characteristics of Mg−12Al alloy was investigated.The distribution,morphology,size,and number density of shrinkage porosities were analyzed under different cooling rates.The relationship between shrinkage porosities and microstructure characteristics was discussed in terms of temperature conditions,feeding channel characteristics,and feeding capacity.Further,the feeding behavior of the residual liquid phase in the solid skeleton was quantified by introducing permeability.Results show a strong correlation between the solid microstructure skeleton and shrinkage porosity characteristics.An increase in permeability corresponds to a declining number density of shrinkage porosities.This study aims to provide a more complete understanding how to reduce shrinkage porosities by controlling microstructure characteristics.展开更多
The cosmetics industry operates on a global scale,making the accurate translation of ingredient terminology crucial for international trade and consumer comprehension.Cosmetic ingredient terms are characterized by the...The cosmetics industry operates on a global scale,making the accurate translation of ingredient terminology crucial for international trade and consumer comprehension.Cosmetic ingredient terms are characterized by their interdisciplinary nature,regulatory constraints,and function-oriented definitions.Based on real-world translation examples,this paper analyzes the challenges in translating cosmetics ingredient terminology for international trade and proposes targeted translation strategies.The study aims to facilitate the global marketing of cosmetic products while ensuring consumers can accurately understand product ingredient information.展开更多
This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and...This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.展开更多
Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath...Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.展开更多
Clarifying the photosynthetic and population characteristics of conventional japonica rice at different yield levels is crucial for boosting yield and ensuring food security.Therefore,a two-year field trial with two c...Clarifying the photosynthetic and population characteristics of conventional japonica rice at different yield levels is crucial for boosting yield and ensuring food security.Therefore,a two-year field trial with two conventional japonica varieties was conducted at four planting densities:16 cm×30 cm(D1),14 cm×30 cm(D2),12 cm×30 cm(D3),and 10 cm×30 cm(D4).This study aimed to investigate how photosynthetic and population characteristics influence grain yield under varying planting densities.The results indicated that higher yields were primarily driven by increased grain weight and seed-setting rate(with a 9.68%‒11.40%higher single panicle weight),supported by optimized dry matter translocation and source-sink relationships.Elevated planting density(D2‒D4)enhanced panicle number and total spikelet number(by 3.91%‒15.00%)but reduced the number of spikelets per panicle,1000-grain weight,and photosynthetic efficiency due to mutual shading.Despite these trade-offs,yield increased by 4.10%‒12.42%under higher densities.The use of planting density D4 in japonica rice cultivation contributed to maximize yield.These findings provide important theoretical insights and practical significance for increasing the yield of conventional japonica rice and ensuring food security.展开更多
Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles a...Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles appeared at the bottom of the part during single-step forming,but no wrinkles were observed during double-step forming.The thinning rate and deviation of the wall thickness of the part in each area were less than 20%and 2.7 mm,correspondingly,and the drawing depth of the part reached 45.8 mm.The effect of double-step forming was better than that of single-step forming,which was related to the IHF forming law.Besides,the characteristics of the IHF process were studied by numerical simulation.The results indicated that when double-step forming was utilized,there was almost no velocity field in the opposite direction of deformation after the bottom of the part contacted the die,and the existence of stress state at the bottom would restrain and eliminate the wrinkles.The inertia effect evolved with the driving pressure.Specially,the inertia effect can improve the flow of metal and reduce the deviation of the wall thickness of the part under double-step forming.展开更多
A flow transition prediction method for calculating effects of Reynolds numbers on aerodynamic characteristics of airfoil is developed,and the accuracy of the method is verified by wind tunnel experiment data and othe...A flow transition prediction method for calculating effects of Reynolds numbers on aerodynamic characteristics of airfoil is developed,and the accuracy of the method is verified by wind tunnel experiment data and other calculation results.On these basics,the infrared thermal imager experiment results of the flow transition in lowspeed wind tunnel and the aerodynamic characteristics experiment results with variable Reynolds number in highspeed wind tunnel are carried out respectively,and compared with the numerical results of helicopter rotor airfoil.Specially,effects of Reynolds numbers on airfoil aerodynamic characteristics by means of flow transition under different working conditions are researched and some meaningful conclusions are obtained.The calculation method,experiment method and results as well as the flow transition analysis conclusions for aerodynamic characteristics can be used for the design of helicopter rotor airfoil,especially for the helicopters under the high altitude and low Reynolds number working conditions.展开更多
BACKGROUND Appropriate care for individuals who attempt suicide and are admitted to the emergency department(ED)can prevent future suicidal behavior.It is vital to understand their sociodemographic characteristics and...BACKGROUND Appropriate care for individuals who attempt suicide and are admitted to the emergency department(ED)can prevent future suicidal behavior.It is vital to understand their sociodemographic characteristics and the effects of targeted psychological care.AIM To analyze sociodemographic characteristics of suicide attempters treated in the ED and evaluate the efficacy of psychological care.METHODS Data from 239 suicide attempters treated in the ED of the Central Hospital of Enshi Tujia and Miao Autonomous Prefecture(Hubei Province,China)between January 2021 and February 2025 were divided into 2:Control(n=108)and psychological care(n=131).The demographic characteristics and effects of the psychological care were analyzed.RESULTS The mean(±SD)age of the 239 patients[114 male(47.7%),125 female(52.3%)]was 26.25±9.3 years,of whom 122(45.2%)were single,117(48.9%)were married,and 106(44.4%)had secondary education.Thirty-eight(15.9%)patients had suicidal intent,with a mean of 1.26±0.59 suicide attempts each.Twenty-two(9.21%)patients had a family history of suicide,while 8(3.34%)had a family history of suicide attempt(s).Before intervention,mean Suicidal Intent Scale scores in the psychological nursing and control groups were 21.57±5.28 and 19.86±5.92,respectively(P>0.05).After 1 month of nursing intervention,the respective scores were 10.09±1.11 and 16.48±0.87(P<0.001);and the re-suicide rates were 11.45%(15/131)and 24.07%(26/108)(P<0.001).CONCLUSION Psychological care significantly reduces suicide risk;EDs should provide comprehensive mental health care.展开更多
Bottom-up and top-down endogenous automobile clusters exhibit distinct evolutionary traits and driving mechanisms,yet their comparative analysis remains understudied.Therefore,using Taizhou automobile industry cluster...Bottom-up and top-down endogenous automobile clusters exhibit distinct evolutionary traits and driving mechanisms,yet their comparative analysis remains understudied.Therefore,using Taizhou automobile industry cluster(TAIC)and Wuhu automobile industry cluster(WAIC)as cases,using historical statistical data and field interview data from the 1980s to 2023,combined with qualitative research methods of thematic and diachronic analysis,and quantitative research methods of social network analysis,we compare both endogenous automobile clusters’evolutionary traits and driving mechanisms.The results confirm both clusters undergo multi-scale spatial reconfiguration,organizational complexification,and intelligent networking technological transformation,yet diverge fundamentally:TAIC evolves through market-driven progressive expansion,transitioning from single to dual-core structures via private enterprise networking,with innovation following market-integrated logic and institutional thickness built on demand-driven evolution.Conversely,WAIC follows planned expansion,maintaining state-led hierarchical single-core stability through policy-driven breakthrough innovation and supply-dominated institutional construction-though both ultimately require formal-informal system synergy.Their coevolution is driven by dynamic interactions of path dependence(weakening influence),learning-innovation(strengthening influence),and relationship selection(inverted U-shaped trajectory),with divergent development paths rooted in TAIC’s grassroots self-organization genes versus WAIC’s top-level design genes,amplified by core enterprises’strategic disparities.The research findings can not only provide decision-making support for China’s industrial upgrading,but also contribute China’s insights to global economic governance.展开更多
The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfa...The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.展开更多
In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic tr...In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.展开更多
The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and redu...The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.展开更多
In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specia...In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specialized course“Application and Practice of RPA Technology in FinTech”.Addressing pain points in financial digital transformation,the course integrates robotic process automation(RPA)principles,financial domain knowledge,and RPA platform practice into a“technology-scenario-capability”trinity teaching system.Through 64 credit hours of integrated theory and practice,it covers RPA fundamentals,financial applications,RPA operations(including core skills like Web/desktop automation),and AI integration,cultivating students’ability to design and implement automated financial workflows.It innovatively features a RPA simulation platform,30+financial case studies,and modular task resources,creating a“teacher-machine-student”interactive model.Practice demonstrates the course effectively enhances students’integration of technical application and business acumen,providing a scalable paradigm for cultivating interdisciplinary FinTech talent.展开更多
The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential sc...The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential scenarios is vexed by the need for more theoretical support.This paper mainly studies the communication channel between the Tx at semibasement and receiver(Rx)at outdoor.The design of an effective communication system relies on an accurate understanding of channel characteristics.Channel measurements and ray-tracing channel modeling are conducted to obtain channel data.The influence of different positions at same semi-basement is studied.Typical channel characteristics are analyzed,such as power delay profile(PDP),power angular profile(PAP),root-mean-square(RMS)delay spread(DS),channel capacity,received power,and path loss.The influence of different semi-basement placements and different floor heights is also compared.Besides,the channel measurements and simulation data fit well,which can illustrate the validity and reliability of the acquired channel data.This paper can provide theoretical support for the design and optimization of smart meter communication systems in semi-basement scenarios.展开更多
This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investig...This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.展开更多
Aiming at the problem of innovative talent training in the industry field in characteristic software colleges,combined with the actual situation of Software College of Northeastern University,this paper analyzes the c...Aiming at the problem of innovative talent training in the industry field in characteristic software colleges,combined with the actual situation of Software College of Northeastern University,this paper analyzes the construction requirements of characteristic talent training mode and training scheme,puts forward the reform of characteristic software innovative talent training scheme integrating production and education,and takes the characteristic direction of financial technology as an example to introduce the curriculum construction based on industry-education integration and school-enterprise cooperation.展开更多
基金co-supported by the National Science Foundation Project,China(No.2019-JCJQ-ZQ-019)the National Natural Science Foundation of China(Nos.52476141 and T2221002)。
文摘This study aims to reveal the influence of Local Momentum Ratio(LMR)on the combustion efficiency of an LOX/GCH4 pintle injector from the perspective of spray characteristics.Hot fire tests were conducted to establish the relationship between combustion efficiency and LMR.The spray characteristics for different LMRs were simulated by the validated volume of fluid-to-discrete phase model method,taking into account the combustion chamber wall confinement.Subsequently,the difference in combustion efficiency was analyzed by comparing the spray simulation results of backpressure conditions similar to hot fire tests.The results indicate that combustion efficiency increased initially(LMR=1.12-1.64)and then decreased(LMR>1.64).Quantitative analysis revealed a linear correlation(R^(2)=0.95)between LMR and combustion efficiency within 1.12<LMR<1.64.As the LMR increased,the improvement in combustion efficiency was attributed to a wider spray distribution range and smaller droplet sizes.The area of the mantle recirculation zone that is detrimental to combustion decreased by approximately 38%,and the droplet size reduced from 37 to 16μm.This effectively enhanced both the mixing of the propellant and the evaporation process.When the LMR exceeded the critical value(1.64 in this study),the impingement of liquid oxygen on the combustion chamber wall was confirmed via overheating discoloration marks on the inner surface of combustion chamber's cylindrical section.The impingement of liquid oxygen on the combustion chamber wall increased the transport of liquid oxygen to the wall,directly reducing the mixing quality and combustion efficiency.The outcomes of this study provide the practical guidance for design and improvement in combustion efficiency of the pintle injector thrust chamber.
基金Project co-funded by European Union in the context of the precommercial public procurement of RD services managed by CDTI E.P.Eco-funded by the European Regional Development Fund(ERDF)as part of the project for the development of a Compact Linear Accelerator for Hadrontherapy,Exp.CPP 03/2023 AB(DCCPI/OCPI)。
文摘In response to the increasing demand for hadron therapy facilities,significant efforts have been directed toward enhancing the performance of high-gradient and high-transmission injectors for light ion beams.For carbon ion irradiations,which offer greater radiobiological efficiency in tumor treatment,recent research has focused on developing high-production sources of fully stripped C^(6+)ions and highly compact,high-frequency RFQ cavities.This study explores the design possibilities of a carbon ion acceleration section using 750 MHz Interdigital H-mode Drift Tube Linacs(IH-DTLs)as a high-efficiency solution for accelerating ions in the 5-10 MeV per nucleon energy range.A particle-tracking routine based on the TRAVEL code was developed to design the acceleration line through a tailored KONUS-type configuration.Three design solutions were proposed and compared,exploring different alternatives regarding the use of a MEBT to match the output beam phase space of the RFQ to the optics of the line,as well as varying considerations for magnetic systems to focus the beam.Additionally,the compatibility of the proposed solutions with the existing design of the carbon ion bent-linac for hadron therapy was assessed.
文摘39 soil samples surrounding a lead-zinc mining area in Guangxi were collected,and the contents of Pb,Hg,Cd,Cr,As,Cu,Zn,and Ni were determined to investigate the pollution characteristics and sources of heavy metals.ArcGIS inverse distance weight difference method was used to analyze the characteristics of pollution distribution,and single-factor pollution index,Nemerow comprehensive pollution index,ground accumulation index,and potential ecological risk index were selected to evaluate the characteristics of heavy metal pollution.Based on correlation analysis,the absolute principal component-multiple linear regression(APCS-MLR)and positive definite matrix factorization(PMF)models were used to analyze the sources of soil heavy metals.The results showed that the average concentrations of all eight heavy metals exceeded both national and Guangxi soil background values.Hg,Cd,and Zn exhibited high variation(greater than 0.5),indicating significant external disturbances,and their spatial distribution was closely related to mining activity locations.The single-factor pollution index evaluation indicated varying degrees of pollution risk for Cd,Zn,and As,with Cd and Zn being the most severe pollutants,as 69.23%and 30.77%of the samples fell into the moderate pollution or higher category.The geoaccumulation index analysis ranked the mean pollution levels of the eight elements as follows:Zn>Cd>Ni>Pb>Cu>Cr>Hg>As,with Cd and Zn showing the most severe contamination,and 51.28%of the samples exhibiting moderate or higher pollution levels.The Nemerow comprehensive pollution index evaluation showed that 74.35%of soil samples were classified as moderate to heavy pollution.The potential ecological risk index assessment indicated significant ecological risks posed by Cd and Zn,with 82.05%and 5.12%of the samples classified as causing strong to extreme ecological risks,respectively.The source apportionment analysis revealed minor differences between the two models.The APCS-MLR model identified three pollution sources and their contribution rates:anthropogenic mining sources(31.13%),parent material sources(40.38%),and unidentified sources(28.49%).The PMF model identified three pollution sources with contribution rates of anthropogenic mining sources(26.10%),parent material sources(46.96%),and a combined traffic and agricultural source(26.61%).Pb,Hg,Cd,and Zn mainly originated from mining activities;Cr,As,and Ni were primarily derived from the parent material,while Cu was predominantly attributed to traffic and agricultural sources.These findings provide a scientific basis for the prevention and control of heavy metal pollution in mining areas.
基金supported by the Hundred-person Program of Chinese Academy of Sciences and the National Natural Science Foundation of China(No.11905074).
文摘Electron beam injectors are pivotal components of large-scale scientific instruments,such as synchrotron radiation sources,free-electron lasers,and electron-positron colliders.The quality of the electron beam produced by the injector critically influences the performance of the entire accelerator-based scientific research apparatus.The injectors of such facilities usually use photocathode and thermionic-cathode electron guns.Although the photocathode injector can produce electron beams of excellent quality,its associated laser system is massive and intricate.The thermionic-cathode electron gun,especially the gridded electron gun injector,has a simple structure capable of generating numerous electron beams.However,its emittance is typically high.In this study,methods to reduce beam emittance are explored through a comprehensive analysis of various grid structures and preliminary design results,examining the evolution of beam phase space at different grid positions.An optimization method for reducing the emittance of a gridded thermionic-cathode electron gun is proposed through theoretical derivation,electromagnetic-field simulation,and beam-dynamics simulation.A 50%reduction in emittance was achieved for a 50 keV,1.7 A electron gun,laying the foundation for the subsequent design of a high-current,low-emittance injector.
基金financially supported by the National Key Research and Development Program of China(No.2021YFB3701000)the National Natural Science Foundation of China(Nos.52471118,52101125,U2037601,and U21A2048)Young Elite Scientists Sponsorship Program by CAST,China(No.2022QNRC001)。
文摘The dependence of shrinkage porosities on microstructure characteristics of Mg−12Al alloy was investigated.The distribution,morphology,size,and number density of shrinkage porosities were analyzed under different cooling rates.The relationship between shrinkage porosities and microstructure characteristics was discussed in terms of temperature conditions,feeding channel characteristics,and feeding capacity.Further,the feeding behavior of the residual liquid phase in the solid skeleton was quantified by introducing permeability.Results show a strong correlation between the solid microstructure skeleton and shrinkage porosity characteristics.An increase in permeability corresponds to a declining number density of shrinkage porosities.This study aims to provide a more complete understanding how to reduce shrinkage porosities by controlling microstructure characteristics.
基金funded by 2025 Graduate Teaching Construction Project of USST.
文摘The cosmetics industry operates on a global scale,making the accurate translation of ingredient terminology crucial for international trade and consumer comprehension.Cosmetic ingredient terms are characterized by their interdisciplinary nature,regulatory constraints,and function-oriented definitions.Based on real-world translation examples,this paper analyzes the challenges in translating cosmetics ingredient terminology for international trade and proposes targeted translation strategies.The study aims to facilitate the global marketing of cosmetic products while ensuring consumers can accurately understand product ingredient information.
文摘This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.
基金supported by the National Natural Science Foundation of China(Grant No.52374317).
文摘Understanding the bubble behaviours and flow characteristics of large-capacity bottom-blowing electric arc furnace(EAF)is crucial for potential exogenous gas-induced slag foaming process and enhancement of molten bath dynamics.A physical model and a 3D gas-slag-steel transient bottom-blowing numerical model of a 150 t EAF were established to investigate the bubble behaviour and flow characteristics throughout the molten steel bath and slag layer under bottom-blowing,with referring to gas flow rate,plug diameter,plug arrangement and injection angle.Results indicate that the average bubble sizes experience increase,dynamic stability and decrease in molten steel bath and then undergo decrease and increase after entering into slag layer for all bottom-blowing modes.The bubble numbers exhibit the opposing trends during the process.Increase in gas flow rate leads to a significant rise in average bubble size but a decrease in number,average dwelling time and the spread area of bubbles in slag layer.Increase in plug diameter causes an opposite impact.The effect of plug arrangement radii on bubbles is almost negligible.Increasing the injection angle results in an increase in bubble size and a decrease in both bubble number and dwelling time in slag layer.The slag foaming potential was discussed referring to the bubble size,number and dwelling time in slag layer.Increase in gas flow rate and plug diameters can significantly enhance the fluids flow through increasing average flow velocity,decreasing mixing time and dead zone ratio of molten bath.Plug arrangement radius and injection angle express nonlinear correlation with average flow velocity and dead zone ratio,and the plug arrangement radius of 0.5R(R represents the radius of bottom circle of EAF model)and injection angle of 15°perform better in enhancing dynamics of molten bath.A group of bottom-blowing parameters are proposed to achieve better comprehensive performance of bubble-induced slag foaming and molten bath dynamics.
基金funded by the National Key R&D Program of China (Grant No. 2024YFD2300301)the National Natural Science Foundation of China (Grant Nos. 32472223 and 31901447)+1 种基金the Priority Academic Program Development of Jiangsu Higher Education Institutionsthe Qinglan Project of Jiangsu Province, China
文摘Clarifying the photosynthetic and population characteristics of conventional japonica rice at different yield levels is crucial for boosting yield and ensuring food security.Therefore,a two-year field trial with two conventional japonica varieties was conducted at four planting densities:16 cm×30 cm(D1),14 cm×30 cm(D2),12 cm×30 cm(D3),and 10 cm×30 cm(D4).This study aimed to investigate how photosynthetic and population characteristics influence grain yield under varying planting densities.The results indicated that higher yields were primarily driven by increased grain weight and seed-setting rate(with a 9.68%‒11.40%higher single panicle weight),supported by optimized dry matter translocation and source-sink relationships.Elevated planting density(D2‒D4)enhanced panicle number and total spikelet number(by 3.91%‒15.00%)but reduced the number of spikelets per panicle,1000-grain weight,and photosynthetic efficiency due to mutual shading.Despite these trade-offs,yield increased by 4.10%‒12.42%under higher densities.The use of planting density D4 in japonica rice cultivation contributed to maximize yield.These findings provide important theoretical insights and practical significance for increasing the yield of conventional japonica rice and ensuring food security.
基金financially supported by the National Key R&D Program of China(No.2024YFE0108800/T24KITG014)the National Natural Science Foundation of China(No:52475411)the International Partnership Program of Chinese Academy of Sciences(No.172GJHZ2022096FN)。
文摘Taking half-tube part with curvature as an example,the Impact Hydroforming(IHF)characteristics were studied by combining the actual forming experiment and numerical simulation.The IHF experiment showed that wrinkles appeared at the bottom of the part during single-step forming,but no wrinkles were observed during double-step forming.The thinning rate and deviation of the wall thickness of the part in each area were less than 20%and 2.7 mm,correspondingly,and the drawing depth of the part reached 45.8 mm.The effect of double-step forming was better than that of single-step forming,which was related to the IHF forming law.Besides,the characteristics of the IHF process were studied by numerical simulation.The results indicated that when double-step forming was utilized,there was almost no velocity field in the opposite direction of deformation after the bottom of the part contacted the die,and the existence of stress state at the bottom would restrain and eliminate the wrinkles.The inertia effect evolved with the driving pressure.Specially,the inertia effect can improve the flow of metal and reduce the deviation of the wall thickness of the part under double-step forming.
文摘A flow transition prediction method for calculating effects of Reynolds numbers on aerodynamic characteristics of airfoil is developed,and the accuracy of the method is verified by wind tunnel experiment data and other calculation results.On these basics,the infrared thermal imager experiment results of the flow transition in lowspeed wind tunnel and the aerodynamic characteristics experiment results with variable Reynolds number in highspeed wind tunnel are carried out respectively,and compared with the numerical results of helicopter rotor airfoil.Specially,effects of Reynolds numbers on airfoil aerodynamic characteristics by means of flow transition under different working conditions are researched and some meaningful conclusions are obtained.The calculation method,experiment method and results as well as the flow transition analysis conclusions for aerodynamic characteristics can be used for the design of helicopter rotor airfoil,especially for the helicopters under the high altitude and low Reynolds number working conditions.
文摘BACKGROUND Appropriate care for individuals who attempt suicide and are admitted to the emergency department(ED)can prevent future suicidal behavior.It is vital to understand their sociodemographic characteristics and the effects of targeted psychological care.AIM To analyze sociodemographic characteristics of suicide attempters treated in the ED and evaluate the efficacy of psychological care.METHODS Data from 239 suicide attempters treated in the ED of the Central Hospital of Enshi Tujia and Miao Autonomous Prefecture(Hubei Province,China)between January 2021 and February 2025 were divided into 2:Control(n=108)and psychological care(n=131).The demographic characteristics and effects of the psychological care were analyzed.RESULTS The mean(±SD)age of the 239 patients[114 male(47.7%),125 female(52.3%)]was 26.25±9.3 years,of whom 122(45.2%)were single,117(48.9%)were married,and 106(44.4%)had secondary education.Thirty-eight(15.9%)patients had suicidal intent,with a mean of 1.26±0.59 suicide attempts each.Twenty-two(9.21%)patients had a family history of suicide,while 8(3.34%)had a family history of suicide attempt(s).Before intervention,mean Suicidal Intent Scale scores in the psychological nursing and control groups were 21.57±5.28 and 19.86±5.92,respectively(P>0.05).After 1 month of nursing intervention,the respective scores were 10.09±1.11 and 16.48±0.87(P<0.001);and the re-suicide rates were 11.45%(15/131)and 24.07%(26/108)(P<0.001).CONCLUSION Psychological care significantly reduces suicide risk;EDs should provide comprehensive mental health care.
基金Under the auspices of National Natural Science Foundation of China(No.42571219)Key Project of Zhejiang Province Soft Science Research Plan(No.2023C25014)。
文摘Bottom-up and top-down endogenous automobile clusters exhibit distinct evolutionary traits and driving mechanisms,yet their comparative analysis remains understudied.Therefore,using Taizhou automobile industry cluster(TAIC)and Wuhu automobile industry cluster(WAIC)as cases,using historical statistical data and field interview data from the 1980s to 2023,combined with qualitative research methods of thematic and diachronic analysis,and quantitative research methods of social network analysis,we compare both endogenous automobile clusters’evolutionary traits and driving mechanisms.The results confirm both clusters undergo multi-scale spatial reconfiguration,organizational complexification,and intelligent networking technological transformation,yet diverge fundamentally:TAIC evolves through market-driven progressive expansion,transitioning from single to dual-core structures via private enterprise networking,with innovation following market-integrated logic and institutional thickness built on demand-driven evolution.Conversely,WAIC follows planned expansion,maintaining state-led hierarchical single-core stability through policy-driven breakthrough innovation and supply-dominated institutional construction-though both ultimately require formal-informal system synergy.Their coevolution is driven by dynamic interactions of path dependence(weakening influence),learning-innovation(strengthening influence),and relationship selection(inverted U-shaped trajectory),with divergent development paths rooted in TAIC’s grassroots self-organization genes versus WAIC’s top-level design genes,amplified by core enterprises’strategic disparities.The research findings can not only provide decision-making support for China’s industrial upgrading,but also contribute China’s insights to global economic governance.
基金National Natural Science Foundation of China(Grant No.52278121).
文摘The cold chain environment is an important route for the long⁃distance transmission of pathogenic micro⁃organisms.In this study,we explored the mechanisms of secondary propagation through surface contact on cold surfaces.A quantitative statistical experimental method was adopted to study the surface⁃contact transmission of micro⁃organisms,wherein the transfer rate of surface contact was the dependent variable and Escherichia coli was used as the indicator bacterium.The effects of contact pressure(0.44,0.86,1.55,2.25,and 2.94 N/cm^(2)),contact time(0,15,30,45,and 60 s),contact angle(15°and 25°),and surface materials(rubber and cotton gloves)were measured at two storage temperatures:cold storage(5℃)and freezing(-18℃).The results showed that as temperature decreases,the transfer of micro⁃organisms through surface contact becomes less probable.The contact time did not significantly influence the transfer rate of micro⁃organisms when items were handled at cold⁃storage temperatures.Based on these results,we recommend placing items as flat as possible to minimize the tilt angle when handling them at cold⁃storage temperatures.Additionally,if the tilt angle cannot be avoided,rubber gloves should be used when handling items stored at large tilt angles,whereas cotton gloves may be used for items placed at smaller angles.
基金National Natural Science Foundation of China under Grant No.52278340Natural Science Foundation of Hebei Province under Grant No.E2023202028。
文摘In this study,the dynamic characteristics and microstructures of lacustrine soft clays were studied.Dynamic character tests were conducted on undisturbed,remolded,and saturated lacustrine soft clays,using a dynamic triaxial tester.A scanning electron microscope(SEM)was employed to assess the soil samples after dynamic testing.The results indicate that the dynamic characteristics of lacustrine soft clay were significantly affected by confining pressure and water content.A quantitative relationship was established among confining pressures,water content,and the dynamic shear modulus ratio.The dynamic characteristic parameters of undisturbed,remolded and saturated soil are obviously different,and the original structure can enhance the shear strength of soil.By comparing the results with those from other studies,we found that the dynamic characters of soft clays were considerably varied in different regions,and lacustrine soft clays had a larger dynamic shear modulus ratio and a smaller damping ratio when the dynamic shear strain was large.Using IPP software to process the microstructural images,we found that the soil was dominated by small pores and medium particles,and the roundness of pores and particles had an apparently positive correlation with the maximum diameter.Moreover,the pores and particles of the soil showed fractal characteristics and directionality,and the fractal dimensions and probability entropy were strongly correlated with the macrostructural parameters.Finally,we developed a prediction model for macrostructural and microstructural parameters.
基金the supports of the National Natural Science Foundation of China(Grant No.52375378)。
文摘The multi-pass intermittent local loading process,which features a more flexible processing path,can further enhance the second material distribution during local loading,improve the formability of components,and reduce forming loads.However,the absence of compatible forming equipment makes it difficult to control the constraint in the unloaded zones during the forming process.This difficulty complicates coordination and control of deformation,particularly for asymmetric rib-web components.Additionally,the current implementation involves multi-fire heating,a long process flow,and high energy consumption,which limits the popularization and application of the local loading process.In this study,a new multi-pass local loading hydraulic forming apparatus that can quickly and reliably switch between heavy-load deformation and low-load constraint for different local loading sub-dies was developed.A 10-tonne laboratory prototype was developed,and the forming characteristics during the forming process as well as the response characteristics of the hydraulic system during the multi-pass intermittent local loading of rib-web component were investigated using numerical simulations and physical experiments.Results indicated that,compared to a whole loading process with the same initial geometry of billet,the total forming load(i.e.,the sum of loaded and restrained loads)is reduced by more than 40%with the local loading process,and by nearly 50%with multi-pass local loading.The multi-pass local loading process allows for more effective control of material flow compared to single-pass local loading,leading to improved cavity filling and reduced flow line disturbance.For a large-scale,complex titanium alloy bulkhead,the cavity filling problem was addressed by optimizing the multi-pass local loading path with an unequal thickness billet.The dynamic performance of the multi-pass local loading hydraulic system was found to be robust,with stable pressure transitions during motion and load switching for the sub-die(s).The dynamic characteristic of the hydraulic cylinder when switching from non-moving/unloaded state to a moving/loading state are consistent whether a load is present or not.However,the dynamic characteristics differ when switching from a moving/loading state to non-moving/unloaded state,showing opposite behavior.The developed hydraulic drive mechanism provides a way for implementation of multi-pass local loading without auxiliary operation and extra heating.The results of the study provide a foundation for the industrial production of large-scale,complex components with reduced force requirement and low-energy consumption.
文摘In response to the Ministry of Education’s requirements for building distinctive model software schools,Software College of Northeastern University and Shenzhen Kingdom Technology Co.,Ltd.jointly developed the specialized course“Application and Practice of RPA Technology in FinTech”.Addressing pain points in financial digital transformation,the course integrates robotic process automation(RPA)principles,financial domain knowledge,and RPA platform practice into a“technology-scenario-capability”trinity teaching system.Through 64 credit hours of integrated theory and practice,it covers RPA fundamentals,financial applications,RPA operations(including core skills like Web/desktop automation),and AI integration,cultivating students’ability to design and implement automated financial workflows.It innovatively features a RPA simulation platform,30+financial case studies,and modular task resources,creating a“teacher-machine-student”interactive model.Practice demonstrates the course effectively enhances students’integration of technical application and business acumen,providing a scalable paradigm for cultivating interdisciplinary FinTech talent.
基金supported by the Natural Science Foundation of Shandong Province under Grant ZR2024MF062the open research fund of National Mobile Communications Research Laboratory,Southeast University under Grants 2025D03+1 种基金the Future Plan Program for Young Scholars of Shandong University,and the Innovation and Technology Support Program for Young Scholars of Colleges and Universities in Shandong Province under Grant 2022KJ009The B6G R&D Group in Shandong University is greatly thanked for channel measurements.
文摘The smart meter communication system has substantial application value for the construction and upgrading of the entire power system.The deployment of the transmitter(Tx)of the smart meter system in the residential scenarios is vexed by the need for more theoretical support.This paper mainly studies the communication channel between the Tx at semibasement and receiver(Rx)at outdoor.The design of an effective communication system relies on an accurate understanding of channel characteristics.Channel measurements and ray-tracing channel modeling are conducted to obtain channel data.The influence of different positions at same semi-basement is studied.Typical channel characteristics are analyzed,such as power delay profile(PDP),power angular profile(PAP),root-mean-square(RMS)delay spread(DS),channel capacity,received power,and path loss.The influence of different semi-basement placements and different floor heights is also compared.Besides,the channel measurements and simulation data fit well,which can illustrate the validity and reliability of the acquired channel data.This paper can provide theoretical support for the design and optimization of smart meter communication systems in semi-basement scenarios.
基金support provided by the National Natural Science Foundation of China(No.52274077)the Natural Science Foundation of Henan(No.242300421072)+2 种基金the Youth Elite Teachers Cultivation Program for Higher Education Institutions in Henan Province(No.2024GGJS036)the Funds for Distinguished Young Scholars of Henan Polytechnic University(No.J2023-3)the Young Core Teacher Funding Scheme of Henan Polytechnic University(No.2023XQG-09).
文摘This study examined non-uniform loading in goaf cantilever rock masses via testing,modeling,and mechanical analysis to solve instantaneous fracture and section buckling from mining abutment pressure.The study investigates the non-uniform load gradient effect on fracture characteristics,including load characteristics,fracture location,fracture distribution,and section roughness.A digital model for fracture interface buckling analysis was developed,elucidating the influence of non-uniform load gradients on Fracture Interface Curvature(FIC),Buckling Rate of Change(BRC),and Buckling Domain Field(BDF).The findings reveal that nonlinear tensile stress concentration and abrupt tensile-compressive-shear strain mutations under non-uniform loading are fundamental mechanisms driving fracture path buckling in cantilever rock mass structures.The buckling process of rock mass under non-uniform load can be divided into two stages:low load gradient and high gradient load.In the stage of low gradient load,the buckling behavior is mainly reflected in the compression-shear fracture of the edge.In the stage of high gradient load,a buckling band along the loading direction is gradually formed in the rock mass.These buckling principles establish a theoretical basis for accurately characterizing bearing fractures,fracture interface instability,and vibration sources within overlying cantilever rock masses in goaf.
文摘Aiming at the problem of innovative talent training in the industry field in characteristic software colleges,combined with the actual situation of Software College of Northeastern University,this paper analyzes the construction requirements of characteristic talent training mode and training scheme,puts forward the reform of characteristic software innovative talent training scheme integrating production and education,and takes the characteristic direction of financial technology as an example to introduce the curriculum construction based on industry-education integration and school-enterprise cooperation.
