The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the ...The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the geometrical shape and connectivity of pores were analyzed based on image process method, and the three dimensional reconstruction of pore structure images was realized. The results show that the porosity of ore particles bed in leaching column is 42.92%, 41.72%, 39.34% at top, middle and bottom zone, respectively. Obviously it has spatial variability and decreases appreciably along the height of the column. The overall average porosity obtained by image processing is 41.33% while the porosity gotten from general measurement method in laboratory is 42.77% showing the results of both methods are consistent well. The pore structure of ore granular media is characterized as a dynamical space network composed of interconnected pore bodies and pore throats. The ratio of throats with equivalent diameter less than 1.91 mm to the total pores is 29.31%, and that of the large pores with equivalent diameter more than 5.73 mm is 2.90%.展开更多
We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal theory.Given the large-scale image data of tibia species with DICOM...We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal theory.Given the large-scale image data of tibia species with DICOM standard for clinical applications,we take advantage of algorithms such as image binarization,hot pixel removing and close operation to obtain visually clear image for tibia microstructure.All of these images are based on 20 CT scanning images with 30μm slice thickness and 30μm interval and continuous changes in pores.For each pore,we determine its profile by using an improved algorithm for edge detection.Then,to calculate its three-dimensional fractal dimension,we measure the circumference perimeter and area of the pores of bone microstructure using a line fitting method based on the least squares.Subsequently,we put forward an algorithm for the pore profiles through ellipse fitting.The results show that the pores have significant fractal characteristics because of the good linear correlation between the perimeter and the area parameters in log–log scale coordinates system,and the ratio of the elliptical short axis to the long axis through ellipse fitting tends to 0.6501.Based on support vector machine and structural risk minimization principle,we put forward a mapping database theory of structure parameters among the pores of CT images and fractal dimension,Poisson’s ratios,porosity and equivalent aperture.On this basis,we put forward a new concept for 3D modeling called precision-measuring digital expressing to reconstruct tibia microstructure for human hard tissue.展开更多
In micro milling machining,tool wear directly affects workpiece quality and accuracy,making effective tool wear monitoring a key factor in ensuring product integrity.The use of machine vision-based methods can provide...In micro milling machining,tool wear directly affects workpiece quality and accuracy,making effective tool wear monitoring a key factor in ensuring product integrity.The use of machine vision-based methods can provide an intuitive and efficient representation of tool wear conditions.However,micro milling tools have non-flat flanks,thin coatings can peel off,and spindle orientation is uncertain during downtime.These factors result in low pixel values,uneven illumination,and arbitrary tool position.To address this,we propose an image-based tool wear monitoring method.It combines multiple algorithms to restore lost pixels due to uneven illumination during segmentation and accurately extract wear areas.Experimental results demonstrate that the proposed algorithm exhibits high robustness to such images,effectively addressing the effects of illumination and spindle orientation.Additionally,the algorithm has low complexity,fast execution time,and significantly reduces the detection time in situ.展开更多
Structural Health Monitoring(SHM)systems play a key role in managing buildings and infrastructure by delivering vital insights into their strength and structural integrity.There is a need for more efficient techniques...Structural Health Monitoring(SHM)systems play a key role in managing buildings and infrastructure by delivering vital insights into their strength and structural integrity.There is a need for more efficient techniques to detect defects,as traditional methods are often prone to human error,and this issue is also addressed through image processing(IP).In addition to IP,automated,accurate,and real-time detection of structural defects,such as cracks,corrosion,and material degradation that conventional inspection techniques may miss,is made possible by Artificial Intelligence(AI)technologies like Machine Learning(ML)and Deep Learning(DL).This review examines the integration of computer vision and AI techniques in Structural Health Monitoring(SHM),investigating their effectiveness in detecting various forms of structural deterioration.Also,it evaluates ML and DL models in SHM for their accuracy in identifying and assessing structural damage,ultimately enhancing safety,durability,and maintenance practices in the field.Key findings reveal that AI-powered approaches,especially those utilizing IP and DL models like CNNs,significantly improve detection efficiency and accuracy,with reported accuracies in various SHM tasks.However,significant research gaps remain,including challenges with the consistency,quality,and environmental resilience of image data,a notable lack of standardized models and datasets for training across diverse structures,and concerns regarding computational costs,model interpretability,and seamless integration with existing systems.Future work should focus on developing more robust models through data augmentation,transfer learning,and hybrid approaches,standardizing protocols,and fostering interdisciplinary collaboration to overcome these limitations and achieve more reliable,scalable,and affordable SHM systems.展开更多
This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert ...This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert triggering and light curve generation for transient sources.By applying the STRIP pipeline to both simulated and real observational data of the Mini-Si Tian survey,it successfully identified various types of variable sources,including stellar flares,supernovae,variable stars,and asteroids,while meeting requirements of reduction speed within 5 minutes.For the real observational data set,the pipeline detected one flare event,127 variable stars,and14 asteroids from three monitored sky regions.Additionally,two data sets were generated:one,a real-bogus training data set comprising 218,818 training samples,and the other,a variable star light curve data set with 421instances.These data sets will be used to train machine learning algorithms,which are planned for future integration into STRIP.展开更多
In the period of Industries 4.0,cyber-physical systems(CPSs)were a major study area.Such systems frequently occur in manufacturing processes and people’s everyday lives,and they communicate intensely among physical e...In the period of Industries 4.0,cyber-physical systems(CPSs)were a major study area.Such systems frequently occur in manufacturing processes and people’s everyday lives,and they communicate intensely among physical elements and lead to inconsistency.Due to the magnitude and importance of the systems they support,the cyber quantum models must function effectively.In this paper,an image-processing-based anomalous mobility detecting approach is suggested that may be added to systems at any time.The expense of glitches,failures or destroyed products is decreased when anomalous activities are detected and unplanned scenarios are avoided.The presently offered techniques are not well suited to these operations,which necessitate information systems for issue treatment and classification at a degree of complexity that is distinct from technology.To overcome such challenges in industrial cyber-physical systems,the Image Processing aided Computer Vision Technology for Fault Detection System(IM-CVFD)is proposed in this research.The Uncertainty Management technique is introduced in addition to achieving optimum knowledge in terms of latency and effectiveness.A thorough simulation was performed in an appropriate processing facility.The study results suggest that the IM-CVFD has a high performance,low error frequency,low energy consumption,and low delay with a strategy that provides.In comparison to traditional approaches,the IM-CVFD produces a more efficient outcome.展开更多
The prerequisite for doctors to diagnose and treat patients is to be able to accurately determine the patient's physical condition, which requires the help of some medical image data to help doctors to judge. At p...The prerequisite for doctors to diagnose and treat patients is to be able to accurately determine the patient's physical condition, which requires the help of some medical image data to help doctors to judge. At present, many hospitals in China are equipped with more advanced and complete imaging equipment. The normal operation of these equipment is closely related to computer image processing technology. This technology is a new technology based on computer technology and biomedical technology. Its key role is to provide convenient conditions for doctors to carry out treatment scientifically and efficiently, and improve the comprehensive service level of the hospital. This paper analyzes and studies the progress and application of computer image processing technology in medical imaging.展开更多
In order to obtain good welding quality, it is necessary to apply quality control because there are many influencing factors in laser welding process. The key to realize welding quality control is to obtain the qualit...In order to obtain good welding quality, it is necessary to apply quality control because there are many influencing factors in laser welding process. The key to realize welding quality control is to obtain the quality information. Abundant weld quality information is contained in weld pool and keyhole. Aiming at Nd：YAG laser welding of stainless steel, a coaxial visual sensing system was constructed. The images of weld pool and keyhole were obtained. Based on the gray character of weld pool and keyhole in images, an image processing algorithm was designed. The search start point and search criteria of weld pool and keyhole edge were determined respectively.展开更多
Objective: To study the effective computerized image processing of underexposed and overexposed X-rays of bones and joints. Methods: Ninety-nine conventional X-ray images (82 were overexposed and 17 were underexposed)...Objective: To study the effective computerized image processing of underexposed and overexposed X-rays of bones and joints. Methods: Ninety-nine conventional X-ray images (82 were overexposed and 17 were underexposed),scanned by an UMAX Astra 4000U Scanner, were converted into digital images on the basis of their analog images. A computerized imaging processing program consisting of five functional modules such as Contrast Stretch, Fast Flourier Transform (FFT), Image Smoothing Modules, Inverse Fast Flourier Transform (IFFT) and Nonlinear Transform performed image contrast stretch and smoothing. Three senior doctors from hospital image sections made their evaluation of all the processed images. Results: Of 82 overexposed films, 71 met the clinical requirements after image processing, and 11 were unable to be applied to clinical diagnosis, accounting for 87% and 13% respectively. Of the other 17 underexposed X-ray images, 11 met the clinical requirements while 6 were not, making a percentage of 64 and 35. Conclusion: Image contrast stretch and smoothing processing are significantly effective on conventional X-ray images which were inappropriately exposed, and can avoid more X-ray radiation caused by handling of radiological photograph again. This method can decrease hospital cost and provide acute and effective X-ray examinations for the treatment and cure for critical patients.展开更多
Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achie...Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction （HCI）-friendly in- terface based on VC ＋＋ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.展开更多
To study the application of TMS320C80 in image processing, an image processing system was designed based on this device, and the task of real time image processing was well accomplished on the hardware platform. TMS3...To study the application of TMS320C80 in image processing, an image processing system was designed based on this device, and the task of real time image processing was well accomplished on the hardware platform. TMS320C80 architecture's high degree of on chip integration and software flexibility will make it widely used in image processing that requires high processing speeds.展开更多
A survey of the population densities of rice planthoppers is important for forecasting decisions and efficient control. Tra- ditional manual surveying of rice planthoppers is time-consuming, fatiguing, and subjective....A survey of the population densities of rice planthoppers is important for forecasting decisions and efficient control. Tra- ditional manual surveying of rice planthoppers is time-consuming, fatiguing, and subjective. A new three-layer detection method was proposed to detect and identify white-backed planthoppers （WBPHs, Sogatella furcifera （Horvath）） and their developmental stages using image processing. In the first two detection layers, we used an AdaBoost classifier that was trained on a histogram of oriented gradient （HOG） features and a support vector machine （SVM） classifier that was trained on Gabor and Local Binary Pattern （LBP） features to detect WBPHs and remove impurities. We achieved a detection rate of 85.6% and a false detection rate of 10.2%. In the third detection layer, a SVM classifier that was trained on the HOG features was used to identify the different developmental stages of the WBPHs, and we achieved an identification rate of 73.1%, a false identification rate of 23.3%, and a 5.6% false detection rate for the images without WBPHs. The proposed three-layer detection method is feasible and effective for the identification of different developmental stages of planthoppers on rice plants in paddy fields.展开更多
To address the problems about the difficulty in accurate recognition of distribution features of gas flow center at blast furnace throat and determine the relationship between gas flow center distribution and gas util...To address the problems about the difficulty in accurate recognition of distribution features of gas flow center at blast furnace throat and determine the relationship between gas flow center distribution and gas utilization rate,a method for recognizing distribution features of blast furnace gas flow center was proposed based on infrared image processing,and distribution features of blast furnace gas flow center and corresponding gas utilization rates were categorized by using fuzzy C-means clustering and statistical methods.A concept of gas flow center offset was introduced.The results showed that,when the percentage of gas flow center without offset exceeded 85%,the average blast furnace gas utilization rate was as high as 41%;when the percentage of gas flow center without offset exceeded50%,the gas utilization rate was primarily the center gas utilization rate,and exhibited a positive correlation with no center offset degree;when the percentage of gas flow center without offset was below 50% but the sum of the percentage of gas flow center without offset and that of gas flow center with small offset exceeded 86%,the gas utilization rate depended on both the center and the edges,and was primarily the edge gas utilization rate.The method proposed was able to accurately and effectively recognize gas flow center distribution state and the relationship between it and gas utilization rate,providing evidence in favor of on-line blast furnace control.展开更多
The geological strength index(GSI) system,widely used for the design and practice of mining process,is a unique rock mass classification system related to the rock mass strength and deformation parameters based on the...The geological strength index(GSI) system,widely used for the design and practice of mining process,is a unique rock mass classification system related to the rock mass strength and deformation parameters based on the generalized Hoek-Brown and Mohr-Coulomb failure criteria.The GSI can be estimated using standard chart and field observations of rock mass blockiness and discontinuity surface conditions.The GSI value gives a numerical representation of the overall geotechnical quality of the rock mass.In this study,we propose a method to determine the GSI quantitatively using photographic images of in situ jointed rock mass with image processing technology,fractal theory and artificial neural network(ANN).We employ the GSI system to characterize the jointed rock mass around the working in a coal mine.The relative error between the proposed value and the given value in the GSI chart is less than 3.6%.展开更多
Up to now the imported commercial scanning probe microscope(SPM) has not an automatic error correcting and reducing system.In this paper a software system is presented to solve this problem.This software system gives ...Up to now the imported commercial scanning probe microscope(SPM) has not an automatic error correcting and reducing system.In this paper a software system is presented to solve this problem.This software system gives the average distance between the centers of mass of two adjacent atoms on the same horizontal line and its mean square root as well as the atoms shape and center of mass by filtering the measured image of a standard sample-highly oriented pyrolysis graphite(HOPG).This system forms the basis of SPMs automatic measurement error correcting.展开更多
Material degradation is accompanied by the changes in surface structure,morphology,and composition.These changes can be recorded by a variety of image acquisition devices that export digital images in grayscale or tru...Material degradation is accompanied by the changes in surface structure,morphology,and composition.These changes can be recorded by a variety of image acquisition devices that export digital images in grayscale or true color to a detector.Information regarding corrosion type and extent can be extracted with image processing methods.This paper provides a comprehensive review of material degradation assessed by digital image processing.Digital image processing systems used to assess material degradation are briefly reviewed,and the algorithms developed to process metallic materials degradation images are described.Physical and electrochemical methods that can be used to support digital image processing results are summarized,and future work that will augment the present methods of evaluating material degradation are discussed.展开更多
The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is present...The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is presented. It has many promising characteristics such as powerful computing capability, broad I/O bandwidth, topology flexibility, and expansibility. The parallel system performance is evaluated by practical experiment.展开更多
Using the method of mathematical morphology,this paper fulfills filtration,segmentation and extraction of morphological features of the satellite cloud image.It also gives out the relative algorithms,which is realized...Using the method of mathematical morphology,this paper fulfills filtration,segmentation and extraction of morphological features of the satellite cloud image.It also gives out the relative algorithms,which is realized by parallel C programming based on Transputer networks.It has been successfully used to process the typhoon and the low tornado cloud image.And it will be used in weather forecast.展开更多
Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results ...Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results The automatic identification of every parking place in the parking plot was realized. The automatic measuring of parked vehicle count and parking lot utilization was completed. Conclusion It can complete the real time recognition, and has some practicabilities.展开更多
The dipping process was recorded firstly by high-speed camera system; acceleration time, speed, and dipping time were set by the control system of dipping bed, respectively. By image processing of dipping process base...The dipping process was recorded firstly by high-speed camera system; acceleration time, speed, and dipping time were set by the control system of dipping bed, respectively. By image processing of dipping process based on Otsu's method, it was found that low-viscosity flux glue eliminates the micelle effectively, very low speed also leads to small micelle hidden between the bumps, and this small micelle and hidden phenomenon disappeared when the speed is ≥0.2 cm s-1. Dipping flux quantity of the bump decreases by about 100 square pixels when flux viscosity is reduced from4,500 to 3,500 mpa s. For the 3,500 mpa s viscosity glue, dipping flux quantity increases with the increase of the speed and decreases with the increase of the speed after the speed is up to 0.8 cm s-1. The stable time of dipping glue can be obtained by real-time curve of dipping flux quantity and is only 80–90 ms when dipping speed is from 1.6 to 4.0 cm s-1. Dipping flux quantity has an increasing trend for acceleration time and has a decreasing trend for acceleration. Dipping flux quantity increases with the increase of dipping time, and is becoming saturated when the time is ≥55 ms.展开更多
基金Project(2004CB619205) supported by the National Key Fundamental Research and Development Program of ChinaProject(50325415) supported by the National Science Fund for Distinguished Young ScholarsProject(50574099) supported by the National Natural Science Foundation of China
文摘The pore structure images of ore particles located at different heights of leaching column were scanned with X-ray computerized tomography (CT) scanner, the porosity and pore size distribution were calculated and the geometrical shape and connectivity of pores were analyzed based on image process method, and the three dimensional reconstruction of pore structure images was realized. The results show that the porosity of ore particles bed in leaching column is 42.92%, 41.72%, 39.34% at top, middle and bottom zone, respectively. Obviously it has spatial variability and decreases appreciably along the height of the column. The overall average porosity obtained by image processing is 41.33% while the porosity gotten from general measurement method in laboratory is 42.77% showing the results of both methods are consistent well. The pore structure of ore granular media is characterized as a dynamical space network composed of interconnected pore bodies and pore throats. The ratio of throats with equivalent diameter less than 1.91 mm to the total pores is 29.31%, and that of the large pores with equivalent diameter more than 5.73 mm is 2.90%.
基金supported by the National Key Research and Development Program of China(No.2016YFC1100600)the National Nature Science Foundation of China(Nos.61540006,61672363).
文摘We present a method for computed tomography(CT)image processing and modeling for tibia microstructure,achieved by using computer graphics and fractal theory.Given the large-scale image data of tibia species with DICOM standard for clinical applications,we take advantage of algorithms such as image binarization,hot pixel removing and close operation to obtain visually clear image for tibia microstructure.All of these images are based on 20 CT scanning images with 30μm slice thickness and 30μm interval and continuous changes in pores.For each pore,we determine its profile by using an improved algorithm for edge detection.Then,to calculate its three-dimensional fractal dimension,we measure the circumference perimeter and area of the pores of bone microstructure using a line fitting method based on the least squares.Subsequently,we put forward an algorithm for the pore profiles through ellipse fitting.The results show that the pores have significant fractal characteristics because of the good linear correlation between the perimeter and the area parameters in log–log scale coordinates system,and the ratio of the elliptical short axis to the long axis through ellipse fitting tends to 0.6501.Based on support vector machine and structural risk minimization principle,we put forward a mapping database theory of structure parameters among the pores of CT images and fractal dimension,Poisson’s ratios,porosity and equivalent aperture.On this basis,we put forward a new concept for 3D modeling called precision-measuring digital expressing to reconstruct tibia microstructure for human hard tissue.
基金Supported by National Natural Science Foundation of China(Grant No.52175528)。
文摘In micro milling machining,tool wear directly affects workpiece quality and accuracy,making effective tool wear monitoring a key factor in ensuring product integrity.The use of machine vision-based methods can provide an intuitive and efficient representation of tool wear conditions.However,micro milling tools have non-flat flanks,thin coatings can peel off,and spindle orientation is uncertain during downtime.These factors result in low pixel values,uneven illumination,and arbitrary tool position.To address this,we propose an image-based tool wear monitoring method.It combines multiple algorithms to restore lost pixels due to uneven illumination during segmentation and accurately extract wear areas.Experimental results demonstrate that the proposed algorithm exhibits high robustness to such images,effectively addressing the effects of illumination and spindle orientation.Additionally,the algorithm has low complexity,fast execution time,and significantly reduces the detection time in situ.
文摘Structural Health Monitoring(SHM)systems play a key role in managing buildings and infrastructure by delivering vital insights into their strength and structural integrity.There is a need for more efficient techniques to detect defects,as traditional methods are often prone to human error,and this issue is also addressed through image processing(IP).In addition to IP,automated,accurate,and real-time detection of structural defects,such as cracks,corrosion,and material degradation that conventional inspection techniques may miss,is made possible by Artificial Intelligence(AI)technologies like Machine Learning(ML)and Deep Learning(DL).This review examines the integration of computer vision and AI techniques in Structural Health Monitoring(SHM),investigating their effectiveness in detecting various forms of structural deterioration.Also,it evaluates ML and DL models in SHM for their accuracy in identifying and assessing structural damage,ultimately enhancing safety,durability,and maintenance practices in the field.Key findings reveal that AI-powered approaches,especially those utilizing IP and DL models like CNNs,significantly improve detection efficiency and accuracy,with reported accuracies in various SHM tasks.However,significant research gaps remain,including challenges with the consistency,quality,and environmental resilience of image data,a notable lack of standardized models and datasets for training across diverse structures,and concerns regarding computational costs,model interpretability,and seamless integration with existing systems.Future work should focus on developing more robust models through data augmentation,transfer learning,and hybrid approaches,standardizing protocols,and fostering interdisciplinary collaboration to overcome these limitations and achieve more reliable,scalable,and affordable SHM systems.
基金supported from the Strategic Pioneer Program of the Astronomy Large-Scale Scientific FacilityChinese Academy of Sciences and the Science and Education Integration Funding of University of Chinese Academy of Sciences+9 种基金the supports from the National Key Basic R&D Program of China via 2023YFA1608303the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0550103)the supports from the Strategic Priority Research Program of the Chinese Academy of Sciences under grant No.XDB0550000the National Natural Science Foundation of China(NSFC,grant Nos.12422303 and12261141690)the supports from the NSFC(grant No.12403024)supports from the NSFC through grant Nos.11988101 and 11933004the Postdoctoral Fellowship Program of CPSF under grant No.GZB20240731the Young Data Scientist Project of the National Astronomical Data Centerthe China Post-doctoral Science Foundation(No.2023M743447)supports from the New Cornerstone Science Foundation through the New Cornerstone Investigator Program and the XPLORER PRIZE。
文摘This paper provides a comprehensive introduction to the mini-Si Tian Real-time Image Processing pipeline(STRIP)and evaluates its operational performance.The STRIP pipeline is specifically designed for real-time alert triggering and light curve generation for transient sources.By applying the STRIP pipeline to both simulated and real observational data of the Mini-Si Tian survey,it successfully identified various types of variable sources,including stellar flares,supernovae,variable stars,and asteroids,while meeting requirements of reduction speed within 5 minutes.For the real observational data set,the pipeline detected one flare event,127 variable stars,and14 asteroids from three monitored sky regions.Additionally,two data sets were generated:one,a real-bogus training data set comprising 218,818 training samples,and the other,a variable star light curve data set with 421instances.These data sets will be used to train machine learning algorithms,which are planned for future integration into STRIP.
文摘In the period of Industries 4.0,cyber-physical systems(CPSs)were a major study area.Such systems frequently occur in manufacturing processes and people’s everyday lives,and they communicate intensely among physical elements and lead to inconsistency.Due to the magnitude and importance of the systems they support,the cyber quantum models must function effectively.In this paper,an image-processing-based anomalous mobility detecting approach is suggested that may be added to systems at any time.The expense of glitches,failures or destroyed products is decreased when anomalous activities are detected and unplanned scenarios are avoided.The presently offered techniques are not well suited to these operations,which necessitate information systems for issue treatment and classification at a degree of complexity that is distinct from technology.To overcome such challenges in industrial cyber-physical systems,the Image Processing aided Computer Vision Technology for Fault Detection System(IM-CVFD)is proposed in this research.The Uncertainty Management technique is introduced in addition to achieving optimum knowledge in terms of latency and effectiveness.A thorough simulation was performed in an appropriate processing facility.The study results suggest that the IM-CVFD has a high performance,low error frequency,low energy consumption,and low delay with a strategy that provides.In comparison to traditional approaches,the IM-CVFD produces a more efficient outcome.
文摘The prerequisite for doctors to diagnose and treat patients is to be able to accurately determine the patient's physical condition, which requires the help of some medical image data to help doctors to judge. At present, many hospitals in China are equipped with more advanced and complete imaging equipment. The normal operation of these equipment is closely related to computer image processing technology. This technology is a new technology based on computer technology and biomedical technology. Its key role is to provide convenient conditions for doctors to carry out treatment scientifically and efficiently, and improve the comprehensive service level of the hospital. This paper analyzes and studies the progress and application of computer image processing technology in medical imaging.
基金Project (10776020) supported by the Joint Foundation of the National Natural Science Foundation of China and China Academy of Engineering Physics
文摘In order to obtain good welding quality, it is necessary to apply quality control because there are many influencing factors in laser welding process. The key to realize welding quality control is to obtain the quality information. Abundant weld quality information is contained in weld pool and keyhole. Aiming at Nd：YAG laser welding of stainless steel, a coaxial visual sensing system was constructed. The images of weld pool and keyhole were obtained. Based on the gray character of weld pool and keyhole in images, an image processing algorithm was designed. The search start point and search criteria of weld pool and keyhole edge were determined respectively.
文摘Objective: To study the effective computerized image processing of underexposed and overexposed X-rays of bones and joints. Methods: Ninety-nine conventional X-ray images (82 were overexposed and 17 were underexposed),scanned by an UMAX Astra 4000U Scanner, were converted into digital images on the basis of their analog images. A computerized imaging processing program consisting of five functional modules such as Contrast Stretch, Fast Flourier Transform (FFT), Image Smoothing Modules, Inverse Fast Flourier Transform (IFFT) and Nonlinear Transform performed image contrast stretch and smoothing. Three senior doctors from hospital image sections made their evaluation of all the processed images. Results: Of 82 overexposed films, 71 met the clinical requirements after image processing, and 11 were unable to be applied to clinical diagnosis, accounting for 87% and 13% respectively. Of the other 17 underexposed X-ray images, 11 met the clinical requirements while 6 were not, making a percentage of 64 and 35. Conclusion: Image contrast stretch and smoothing processing are significantly effective on conventional X-ray images which were inappropriately exposed, and can avoid more X-ray radiation caused by handling of radiological photograph again. This method can decrease hospital cost and provide acute and effective X-ray examinations for the treatment and cure for critical patients.
基金National Natural Science Foundation of China(No.61302159,61227003,61301259)Natual Science Foundation of Shanxi Province(No.2012021011-2)+2 种基金Specialized Research Fund for the Doctoral Program of Higher Education,China(No.20121420110006)Top Science and Technology Innovation Teams of Higher Learning Institutions of Shanxi Province,ChinaProject Sponsored by Scientific Research for the Returned Overseas Chinese Scholars,Shanxi Province(No.2013-083)
文摘Real-time detection for object size has now become a hot topic in the testing field and image processing is the core algorithm. This paper focuses on the processing and display of the collected dynamic images to achieve a real-time image pro- cessing for the moving objects. Firstly, the median filtering, gain calibration, image segmentation, image binarization, cor- ner detection and edge fitting are employed to process the images of the moving objects to make the image close to the real object. Then, the processed images are simultaneously displayed on a real-time basis to make it easier to analyze, understand and identify them, and thus it reduces the computation complexity. Finally, human-computer interaction （HCI）-friendly in- terface based on VC ＋＋ is designed to accomplish the digital logic transform, image processing and real-time display of the objects. The experiment shows that the proposed algorithm and software design have better real-time performance and accu- racy which can meet the industrial needs.
文摘To study the application of TMS320C80 in image processing, an image processing system was designed based on this device, and the task of real time image processing was well accomplished on the hardware platform. TMS320C80 architecture's high degree of on chip integration and software flexibility will make it widely used in image processing that requires high processing speeds.
基金financially supported by the National High Technology Research and Development Program of China (863 Program, 2013AA102402)the 521 Talent Project of Zhejiang Sci-Tech University, Chinathe Key Research and Development Program of Zhejiang Province, China (2015C03023)
文摘A survey of the population densities of rice planthoppers is important for forecasting decisions and efficient control. Tra- ditional manual surveying of rice planthoppers is time-consuming, fatiguing, and subjective. A new three-layer detection method was proposed to detect and identify white-backed planthoppers （WBPHs, Sogatella furcifera （Horvath）） and their developmental stages using image processing. In the first two detection layers, we used an AdaBoost classifier that was trained on a histogram of oriented gradient （HOG） features and a support vector machine （SVM） classifier that was trained on Gabor and Local Binary Pattern （LBP） features to detect WBPHs and remove impurities. We achieved a detection rate of 85.6% and a false detection rate of 10.2%. In the third detection layer, a SVM classifier that was trained on the HOG features was used to identify the different developmental stages of the WBPHs, and we achieved an identification rate of 73.1%, a false identification rate of 23.3%, and a 5.6% false detection rate for the images without WBPHs. The proposed three-layer detection method is feasible and effective for the identification of different developmental stages of planthoppers on rice plants in paddy fields.
基金Item Sponsored by National Natural Science Foundation of China(61263015)
文摘To address the problems about the difficulty in accurate recognition of distribution features of gas flow center at blast furnace throat and determine the relationship between gas flow center distribution and gas utilization rate,a method for recognizing distribution features of blast furnace gas flow center was proposed based on infrared image processing,and distribution features of blast furnace gas flow center and corresponding gas utilization rates were categorized by using fuzzy C-means clustering and statistical methods.A concept of gas flow center offset was introduced.The results showed that,when the percentage of gas flow center without offset exceeded 85%,the average blast furnace gas utilization rate was as high as 41%;when the percentage of gas flow center without offset exceeded50%,the gas utilization rate was primarily the center gas utilization rate,and exhibited a positive correlation with no center offset degree;when the percentage of gas flow center without offset was below 50% but the sum of the percentage of gas flow center without offset and that of gas flow center with small offset exceeded 86%,the gas utilization rate depended on both the center and the edges,and was primarily the edge gas utilization rate.The method proposed was able to accurately and effectively recognize gas flow center distribution state and the relationship between it and gas utilization rate,providing evidence in favor of on-line blast furnace control.
文摘The geological strength index(GSI) system,widely used for the design and practice of mining process,is a unique rock mass classification system related to the rock mass strength and deformation parameters based on the generalized Hoek-Brown and Mohr-Coulomb failure criteria.The GSI can be estimated using standard chart and field observations of rock mass blockiness and discontinuity surface conditions.The GSI value gives a numerical representation of the overall geotechnical quality of the rock mass.In this study,we propose a method to determine the GSI quantitatively using photographic images of in situ jointed rock mass with image processing technology,fractal theory and artificial neural network(ANN).We employ the GSI system to characterize the jointed rock mass around the working in a coal mine.The relative error between the proposed value and the given value in the GSI chart is less than 3.6%.
文摘Up to now the imported commercial scanning probe microscope(SPM) has not an automatic error correcting and reducing system.In this paper a software system is presented to solve this problem.This software system gives the average distance between the centers of mass of two adjacent atoms on the same horizontal line and its mean square root as well as the atoms shape and center of mass by filtering the measured image of a standard sample-highly oriented pyrolysis graphite(HOPG).This system forms the basis of SPMs automatic measurement error correcting.
基金financially supported by the National Natural Science Foundation of China(No.51701140)。
文摘Material degradation is accompanied by the changes in surface structure,morphology,and composition.These changes can be recorded by a variety of image acquisition devices that export digital images in grayscale or true color to a detector.Information regarding corrosion type and extent can be extracted with image processing methods.This paper provides a comprehensive review of material degradation assessed by digital image processing.Digital image processing systems used to assess material degradation are briefly reviewed,and the algorithms developed to process metallic materials degradation images are described.Physical and electrochemical methods that can be used to support digital image processing results are summarized,and future work that will augment the present methods of evaluating material degradation are discussed.
基金This project was supported by the National Natural Science Foundation of China (60135020).
文摘The flexibility of traditional image processing system is limited because those system are designed for specific applications. In this paper, a new TMS320C64x-based multi-DSP parallel computing architecture is presented. It has many promising characteristics such as powerful computing capability, broad I/O bandwidth, topology flexibility, and expansibility. The parallel system performance is evaluated by practical experiment.
文摘Using the method of mathematical morphology,this paper fulfills filtration,segmentation and extraction of morphological features of the satellite cloud image.It also gives out the relative algorithms,which is realized by parallel C programming based on Transputer networks.It has been successfully used to process the typhoon and the low tornado cloud image.And it will be used in weather forecast.
文摘Aim To study the parking management in the condition of vehicles' increasing. Methods The methods of pattern recognition and image processing were used to analyze the eigenvalues of parking lot images. Results The automatic identification of every parking place in the parking plot was realized. The automatic measuring of parked vehicle count and parking lot utilization was completed. Conclusion It can complete the real time recognition, and has some practicabilities.
基金supported by National Natural Science Foundation of China (No. 51275536)the China High Technology R&D Program 973 (No. 2015CB057206)
文摘The dipping process was recorded firstly by high-speed camera system; acceleration time, speed, and dipping time were set by the control system of dipping bed, respectively. By image processing of dipping process based on Otsu's method, it was found that low-viscosity flux glue eliminates the micelle effectively, very low speed also leads to small micelle hidden between the bumps, and this small micelle and hidden phenomenon disappeared when the speed is ≥0.2 cm s-1. Dipping flux quantity of the bump decreases by about 100 square pixels when flux viscosity is reduced from4,500 to 3,500 mpa s. For the 3,500 mpa s viscosity glue, dipping flux quantity increases with the increase of the speed and decreases with the increase of the speed after the speed is up to 0.8 cm s-1. The stable time of dipping glue can be obtained by real-time curve of dipping flux quantity and is only 80–90 ms when dipping speed is from 1.6 to 4.0 cm s-1. Dipping flux quantity has an increasing trend for acceleration time and has a decreasing trend for acceleration. Dipping flux quantity increases with the increase of dipping time, and is becoming saturated when the time is ≥55 ms.
