Band offset in semiconductors is a fundamental physical quantity that determines the performance of optoelectronic devices.However,the current method of calculating band offset is difficult to apply directly to the la...Band offset in semiconductors is a fundamental physical quantity that determines the performance of optoelectronic devices.However,the current method of calculating band offset is difficult to apply directly to the large-lattice-mismatched and heterovalent semiconductors because of the existing electric field and large strain at the interfaces.Here,we proposed a modified method to calculate band offsets for such systems,in which the core energy level shifts caused by heterovalent effects and lattice mismatch are estimated by interface reconstruction and the insertion of unidirectional strain structures as transitions,respectively.Taking the Si and III-V systems as examples,the results have the same accuracy as what is a widely used method for small-lattice-mismatched systems,and are much closer to the experimental values for the large-lattice-mismatched and heterovalent systems.Furthermore,by systematically studying the heterojunctions of Si and III-V semiconductors along different directions,it is found that the band offsets of Si/InAs and Si/InSb systems in[100],[110]and[111]directions belong to the type I,and could be beneficial for silicon-based luminescence performance.Our study offers a more reliable and direct method for calculating band offsets of large-lattice-mismatched and heterovalent semiconductors,and could provide theoretical support for the design of the high-performance silicon-based light sources.展开更多
Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully construct...Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.展开更多
III-V semiconductors such as GaAs are widely studied as promising candidates for high-speed integrated circuit.Despite these applications for conventional bulk structures,their fundamental physical properties in the n...III-V semiconductors such as GaAs are widely studied as promising candidates for high-speed integrated circuit.Despite these applications for conventional bulk structures,their fundamental physical properties in the nanoscale limit are still in scarcity,which is of great importance for the development of nanoelectronics.In this work,we demonstrate that the III-V semiconductor MX(M=Al,Ga,In;X=P,As,Sb)in its two-dimensional(2D)limit could exhibit double layer honeycomb(DLHC)configuration and distorted tetrahedral coordination,according to our first-principles calculations with HSE06 hybrid functional.It is found that surface reconstruction endows 2D III-V DLHCs with pronouncedly different electronic and magnetic properties from their bulk counterparts due to strong interlayer coupling.Mexican-hat-shape bands emerge at the top valence bands of pristine AlP,GaP,InP,AlAs,and InAs DLHCs,inducing the density of states showing a sharp van Hove singularity near the Fermi level.As a result,these DLHCs exhibit itinerant magnetism upon moderate hole doping,while the rest GaAs,AlSb,GaSb,and InSb DLHCs become magnetic under tensile strain with hole doping.With an exchange splitting of the localized pz states at the top valence bands,the hole-doped III-V DLHCs become half-metals with 100%spin-polarization.Remarkably,the InSb DLHC shows inverted band structure near the Fermi level,bringing about nontrivial topological band structures in stacked InSb DLHC due to the strong spin-orbital coupling.These III-V DLHCs expand the members of 2D material family and their exotic magnetic and topological properties may offer great potential for applications in the novel electronic and spintronic devices.展开更多
In recent years, the narrow bandgap antimonide based compound semiconductors (ABCS) are widely regarded as the first candidate materials for fabrication of the third generation infrared photon detectors and integrated...In recent years, the narrow bandgap antimonide based compound semiconductors (ABCS) are widely regarded as the first candidate materials for fabrication of the third generation infrared photon detectors and integrated circuits with ultra-high speed and ultra-low power consumption. Due to their unique bandgap structure and physical properties, it makes a vast space to develop various novel devices, and becomes a hot research area in many developed countries such as USA, Japan, Germany and Israel etc. Research progress in the preparation and application of ABCS materials, existing problems and some latest results are briefly introduced.展开更多
The effect of doping concentrations and a transverse external magnetostatic field on operational characteristics of parametric amplification of backward Stokes signal has been studied, using hydrodynamic model of semi...The effect of doping concentrations and a transverse external magnetostatic field on operational characteristics of parametric amplification of backward Stokes signal has been studied, using hydrodynamic model of semiconductors, in the far infrared regime. The model suggests three achievable resonance conditions: (i) lattice frequency and plasma frequency (ii) stokes frequency and electron-cyclotron frequency (iii) stokes frequency and hybrid (plasma and electron-cyclotron) frequency and these conditions have been utilised, on one hand, to substantially reduce the value of threshold intensity for onset of the parametric amplification and on the other hand, for switching of parametric large positive and negative gain coefficient (i.e. amplification and absorption). For example a strong transverse magnetostatic field 10.0 T with free carrier concentration 1.5 x 1019m-3 enhances the gain by a factor of 103 as in its absence. Results also suggest that a weakly piezoelectric III–V semiconductor duly illuminated by slightly off-resonant not-too-high-power pulsed lasers with pulse duration sufficiently larger than the acoustic phonon lifetime is one of promising hosts for parametric amplifier/frequency converter.展开更多
Semiconductor optoelectronics devices,capable of converting electrical power into light or conversely light into electrical power in a compact and highly efficient manner represent one of the most advanced technologie...Semiconductor optoelectronics devices,capable of converting electrical power into light or conversely light into electrical power in a compact and highly efficient manner represent one of the most advanced technologies ever developed,which has profoundly reshaped the modern life with a wide range of applications.In recent decades,semiconductor technology has rapidly evolved from first-generation narrow bandgap materials(Si,Ge)to the latest fourth-generation ultra-wide bandgap semiconductor(GaO,diamond,AlN)with enhanced performance to meet growing demands.Additionally,merging semiconductor devices with other techniques,such as computer assisted design,state-of-the-art micro/nano fabrications,novel epitaxial growth,have significantly accelerated the development of semiconductor optoelectronics devices.Among them,integrating metasurfaces with semiconductor optoelectronic devices have opened new frontiers for on-chip control of their electromagnetic response,providing access to previously inaccessible degrees of freedom.We review the recent advances in on-chip control of a variety of semiconductor optoelectronic devices using integrated metasurfaces,including semiconductor lasers,semiconductor light emitting devices,semiconductor photodetectors,and low dimensional semiconductors.The integration of metasurfaces with semiconductors offers wafer-level ultracompact solutions for manipulating the functionalities of semiconductor devices,while also providing a practical platform for implementing cuttingedge metasurface technology in real-world applications.展开更多
Although there are numerous optical spectroscopy techniques and methods that have been used to extract the fundamental bandgap of a semiconductor,most of them belong to one of these three approaches:(1)the excitonic a...Although there are numerous optical spectroscopy techniques and methods that have been used to extract the fundamental bandgap of a semiconductor,most of them belong to one of these three approaches:(1)the excitonic absorption,(2)modulation spectroscopy,and(3)the most widely used Tauc-plot.The excitonic absorption is based on a many-particle theory,which is physically the most correct approach,but requires more stringent crystalline quality and appropriate sample preparation and experimental implementation.The Tauc-plot is based on a single-particle theo⁃ry that neglects the many-electron effects.Modulation spectroscopy analyzes the spectroscopy features in the derivative spectrum,typically,of the reflectance and transmission under an external perturbation.Empirically,the bandgap ener⁃gy derived from the three approaches follow the order of E_(ex)>E_(MS)>E_(TP),where three transition energies are from exci⁃tonic absorption,modulation spectroscopy,and Tauc-plot,respectively.In principle,defining E_(g) as the single-elec⁃tron bandgap,we expect E_(g)>E_(ex),thus,E_(g)>E_(TP).In the literature,E_(TP) is often interpreted as E_(g),which is conceptual⁃ly problematic.However,in many cases,because the excitonic peaks are not readily identifiable,the inconsistency be⁃tween E_(g) and E_(TP) becomes invisible.In this brief review,real world examples are used(1)to illustrate how excitonic absorption features depend sensitively on the sample and measurement conditions;(2)to demonstrate the differences between E_(ex),E_(MS),and E_(TP) when they can be extracted simultaneously for one sample;and(3)to show how the popular⁃ly adopted Tauc-plot could lead to misleading results.Finally,it is pointed out that if the excitonic absorption is not ob⁃servable,the modulation spectroscopy can often yield a more useful and reasonable bandgap than Tauc-plot.展开更多
Radiation doses to patients in diagnostics and interventional radiology need to be optimized to comply with the principles of radiation protection in medical practice. This involves using specific detectors with respe...Radiation doses to patients in diagnostics and interventional radiology need to be optimized to comply with the principles of radiation protection in medical practice. This involves using specific detectors with respective diagnostic beams to carry out quality control/quality assurance tests needed to optimize patient doses in the hospital. Semiconductor detectors are used in dosimetry to verify the equipment performance and dose to patients. This work aims to assess the performance, energy dependence, and response of five commercially available semiconductor detectors in RQR, RQR-M, RQA, and RQT at Secondary Standard Dosimetry for clinical applications. The diagnostic beams were generated using Exradin A4 reference ion chamber and PTW electrometer. The ambient temperature and pressure were noted for KTP correction. The detectors designed for RQR showed good performance in RQT beams and vice versa. The detectors designed for RQR-M displayed high energy dependency in other diagnostic beams. The type of diagnostic beam quality determines the response of semiconductor detectors. Therefore, a detector should be calibrated according to the beam qualities to be measured.展开更多
Semiconductors and related fields today hold vast application prospects.The semiconductor wafer fabrication process involves steps such as substrate preparation and epitaxy,which occur in high-temperature corrosive en...Semiconductors and related fields today hold vast application prospects.The semiconductor wafer fabrication process involves steps such as substrate preparation and epitaxy,which occur in high-temperature corrosive environments.Consequently,components like crucibles,susceptors and wafer carriers require carbon-based materials such as graphite and carbon-carbon composites.However,traditional carbon materials underperform in these extreme conditions,failing to effectively address the challenges.This leads to issues including product contamination and shortened equipment lifespan.Therefore,effective protection of carbon materials is crucial.This paper reviews current research status on the preparation methods and properties of corrosion-resistant coatings within relevant domestic and international fields.Preparation methods include various techniques such as physical vapor deposition(PVD),chemical vapor deposition(CVD)and the sol-gel method.Furthermore,it offers perspectives on future research directions for corrosion-resistant coated components in semiconductor equipment.These include exploring novel coating materials,improving coating preparation processes,enhancing coating corrosion resistance,as well as further investigating the interfacial interactions between coatings and carbon substrates to achieve better adhesion and compatibility.展开更多
Organic semiconductor materials have shown unique advantages in the development of optoelectronic devices due to their ease of preparation,low cost,lightweight,and flexibility.In this work,we explored the application ...Organic semiconductor materials have shown unique advantages in the development of optoelectronic devices due to their ease of preparation,low cost,lightweight,and flexibility.In this work,we explored the application of the organic semiconductor Y6-1O single crystal in photodetection devices.Firstly,Y6-1O single crystal material was prepared on a silicon substrate using solution droplet casting method.The optical properties of Y6-1O material were characterized by polarized optical microscopy,fluorescence spectroscopy,etc.,confirming its highly single crystalline performance and emission properties in the near-infrared region.Phototransistors based on Y6-1O materials with different thicknesses were then fabricated and tested.It was found that the devices exhibited good visible to near-infrared photoresponse,with the maximum photoresponse in the near-infrared region at 785 nm.The photocurrent on/off ratio reaches 10^(2),and photoresponsivity reaches 16 mA/W.It was also found that the spectral response of the device could be regulated by gate voltage as well as the material thickness,providing important conditions for optimizing the performance of near-infrared photodetectors.This study not only demonstrates the excellent performance of organic phototransistors based on Y6-1O single crystal material in near-infrared detection but also provides new ideas and directions for the future development of infrared detectors.展开更多
Realizing ferromagnetic semiconductors with high Curie temperature TC is still a challenge in spintronics.Recent experiments have reported two-dimensional(2D)room temperature ferromagnetic metals,such as monolayer Cr_...Realizing ferromagnetic semiconductors with high Curie temperature TC is still a challenge in spintronics.Recent experiments have reported two-dimensional(2D)room temperature ferromagnetic metals,such as monolayer Cr_(3)Te_(6).In this paper,through density functional theory(DFT)calculations,we propose a method to obtain 2D high TC ferromagnetic semiconductors through element replacement in these ferromagnetic metals.We predict that monolayer(Cr_(4/6),Mo_(2/6))_(3)Te_(6),created via element replacement in monolayer Cr_(3)Te_(6),is a room-temperature ferromagnetic semiconductor exhibiting a band gap of 0.34 eV and a TC of 384 K.Our analysis reveals that the metal-to-semiconductor transition stems from the synergistic interplay of Mo-induced lattice distortion,which resolves band overlap,and the electronic contributions of Mo dopants,which further drive the formation of a distinct band gap.The origin of the high TC is traced to strong superexchange coupling between magnetic ions,analyzed via the superexchange model with DFT and Wannier function calculations.Considering the fast developments in fabrication and manipulation of 2D materials,our theoretical results propose an approach to explore high-temperature ferromagnetic semiconductors derived from experimentally obtained 2D high-temperature ferromagnetic metals through element replacement.展开更多
The effect of intermetallic particles on the corrosion of 6061 aluminum alloy and its coating used in semiconductor processing systems was systematically studied via liquid and gas experiments and micromorphology char...The effect of intermetallic particles on the corrosion of 6061 aluminum alloy and its coating used in semiconductor processing systems was systematically studied via liquid and gas experiments and micromorphology characterization.The results revealed that a huge difference of corrosion resistance between imported and domestic 6061 aluminum alloys in HCl solution and gas acid mist experiments mainly was attributed to the different size and amount of Al_(15)(Fe,Mn)_(3)Si_(2).The corrosion resistance of domestic 6061 alloy in dry/wet semiconductor electronic special gas environments was worse than that of imported aluminum alloy,and there are great differences in the corrosion mechanism of 6061 alloy caused by the second phase in the two dry/wet environments.And the corrosion resistance of the hard anodized alumina film was closely related to the microscopic morphology of holes.The vertical and elongatedα-Al_(15)(Mn,Fe)_(3)Si_(2) phase was formed in the rolled aluminum alloy that has been rolled perpendicular to the surface of the substrate.Compared to the horizontal long hole,the longitudinal long holes generated by the verticalα-Al_(15)(Mn,Fe)_(3)Si_(2) phase will enable the corrosive medium to reach the substrate rapidly,which significantly weakens the corrosion resistance of the hard anodized film.展开更多
Flexoelectricity,an electromechanical coupling between strain gradient and electrical polarization in dielectrics or semiconductors,has attracted significant scientific interest.It is reported that large flexoelectric...Flexoelectricity,an electromechanical coupling between strain gradient and electrical polarization in dielectrics or semiconductors,has attracted significant scientific interest.It is reported that large flexoelectric behaviors can be obtained at the nanoscale because of the size effect.However,the flexoelectric responses of centrosymmetric semiconductors(CSs)are extremely weak under a conventional beam-bending approach,owing to weak flexoelectric coefficients and small strain gradients.The flexoelectric-like effect is an enhanced electromechanical effect coupling the flexoelectricity and piezoelectricity.In this paper,a composite structure consisting of piezoelectric dielectric layers and a CS layer is proposed.The electromechanical response of the CS is significantly enhanced via antisymmetric piezoelectric polarization.Consequently,the cross-scale mechanically tuned carrier distribution in the semiconductor is realized.Meanwhile,the significant size dependence of the electromechanical fields in the semiconductor is demonstrated.The flexoelectronics suppression is found when the semiconductor thickness reaches a critical size(0.8μm).In addition,the first-order carrier density of the composite structure under local loads is illustrated.Our results can suggest the structural design for flexoelectric semiconductor devices.展开更多
All-inorganic CsPbBr_(3) perovskite quantum dots(QDs)have attracted extensive attention in photoelectric detection for their excellent photoelectric properties and stability.However,the CsPbBr_(3) quantum dot film exh...All-inorganic CsPbBr_(3) perovskite quantum dots(QDs)have attracted extensive attention in photoelectric detection for their excellent photoelectric properties and stability.However,the CsPbBr_(3) quantum dot film exhibits a high non-radiative recombination rate,and the mismatch in energy levels with the carbon electrode weakens hole extraction efficiency.These reduces the device's performance.To improve this,a semiconductor photodetector based on fluorine-doped tin oxide(FTO)/dense titanium dioxide(c-TiO_(2))/mesoporous titanium dioxide(m-TiO_(2))/CsPbBr_(3) QDs/CsPbBr_(x)I_(3-x)(x=2,1.5,1)QDs/C struc-ture was studied.By adjusting the Br-:I-ratio,the synthesized CsPbBr_(x)I_(3-x)(x=2,1.5,1)QDs showed an adjustable band gap width of 2.284-2.394 eV.And forming a typeⅡband structure with CsPbBr_(3) QDs,which reduced the valence band offset between the active layer and the carbon electrode,this promoted carrier extraction and reduced non-radiative recombination rate.Compared with the original device(the photosensitive layer is CsPbBr_(3) QDs),the performance of the photodetector based on the CsPbBr_(3) QDs/CsPbBr2I QDs heterostructure is significantly improved,the responsivity(R)increased by 73%,the specific detectivity rate(D^(*))increased from 6.98×10^(12) to 3.19×10^(13) Jones,the on/off ratio reached 106.This study provides a new idea for the development of semiconductor tandem detectors.展开更多
We report the manipulation of ferromagnetism in magnetic semiconductor Ba(Zn,Mn,Cu)_(2)As_(2)through chemical pressure.The substitutions of Sr for Ba and Sb for As introduce positive and negative chemical pressures,re...We report the manipulation of ferromagnetism in magnetic semiconductor Ba(Zn,Mn,Cu)_(2)As_(2)through chemical pressure.The substitutions of Sr for Ba and Sb for As introduce positive and negative chemical pressures,respectively;neither Sr doping nor Sb doping change the tetragonal crystal structure.Based on Ba(Zn_(0.75)Mn_(0.125)Cu_(0.125))_(2)As_(2)with T_(C)~34 K,10%Sr/Ba substitutions significantly improve T_(C)by~15%to 39 K,whereas 10%Sb/As substitutions substantially reduce TCby~47%to 18 K.The AC magnetic susceptibility measurements indicate that Sr-doped and Sb-doped samples evolve into a spin glass state below the spin freezing temperature Tf.Electrical transport measurements demonstrate that Sr-doped specimens retain semiconducting behavior;additionally,they display a significant negative magnetoresistance effect under applied magnetic fields and the magnetoresistance reaches~-19%at 8 T.展开更多
TiO_(2)is a well-known photocatalyst with a band gap of 3.2 eV,yet its ability to absorb light is limited to the short wavelengths of ultraviolet light.To achieve a more effective photocatalytic material,we have desig...TiO_(2)is a well-known photocatalyst with a band gap of 3.2 eV,yet its ability to absorb light is limited to the short wavelengths of ultraviolet light.To achieve a more effective photocatalytic material,we have designed two-dimensional semiconductor TiOS materials using swarm intelligence algorithms combined with first-principles calculations.Three stable low-energy structures with space groups of P2_(1)/m,P3m1 and P2_(1)/c are identified.Among these structures,the Janus P3m1 phase is a direct bandgap semiconductor,while the P2_(1)/m and P2_(1)/c phases are indirect bandgap semiconductors.Utilizing the accurate hybrid density functional HSE06 method,the band gaps of the three structures are calculated to be 2.34 eV(P2_(1)/m),2.24 eV(P3m1)and 3.22 eV(P2_(1)/c).Optical calculations reveal that TiOS materials exhibit a good light-harvesting capability in both visible and ultraviolet spectral ranges.Moreover,the photocatalytic calculations also indicate that both P2_(1)/m and P3m1 TiOS can provide a strong driving force for converting H_(2)O to H_(2)and O_(2)in an acidic environment with pH=0.The structural stabilities,mechanical properties,electronic structures and hydrogen evolution reaction activities are also discussed in detail.Our research suggests that two-dimensional TiOS materials have potential applications in both semiconductor devices and photocatalysis.展开更多
The fracture mechanics theory posits that cracks induce strain energy concentration near their tips in structural components,generating localized flexibility that impedes crack propagation.Theoretically,cracks are rep...The fracture mechanics theory posits that cracks induce strain energy concentration near their tips in structural components,generating localized flexibility that impedes crack propagation.Theoretically,cracks are represented as dimensionless,massless spring models,effectively capturing crack characteristics and cross-sectional properties at the crack location.Leveraging this spring-based representation,this study establishes an open-crack model for a one-dimensional(1D)piezoelectric semiconductor(PSC)curved beam under dynamic loading.This model enables the investigation of vibration characteristics in cracked structures.The analytical solutions for the electromechanical fields of the beam are derived using the differential operator method,and the natural frequencies together with the corresponding generalized mode shapes of the beam are determined analytically.Furthermore,the effects of the crack parameters on the natural vibration characteristics of the PSC curved beam are analyzed.展开更多
A principle was proposed for designing a method to seal anodized aluminum used in semiconductor processing apparatuses.Thermodynamic calculations and Fick’s second law were used to reveal trends in the metal ion depo...A principle was proposed for designing a method to seal anodized aluminum used in semiconductor processing apparatuses.Thermodynamic calculations and Fick’s second law were used to reveal trends in the metal ion deposition,deposition product stability,vapor pressures of halides for selected metal ions,the holding temperature,and time.Interactions between ion concentrations and the sealing temperature were also revealed.According to the design principles,anodized aluminum dipped in 1 mM Cr^(3+)ion solution and steam-sealed for 18 h exhibited the highest corrosion resistance when exposed to 5 wt.%HCl solution and HCl gas,verifying the designed results.展开更多
Doping plays a pivotal role in enhancing the performance of organic semiconductors(OSCs)for advanced optoelectronic and thermoelectric applications.In this study,we systematically investigated the doping performance a...Doping plays a pivotal role in enhancing the performance of organic semiconductors(OSCs)for advanced optoelectronic and thermoelectric applications.In this study,we systematically investigated the doping performance and applicability of the ionic dopant 4-isopropyl-4′-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate)(DPI-TPFB)as a p-dopant for OSCs.Using the p-type OSC PBBT-2T as a model system,we demonstrated that DPI-TPFB shows significant doping effect,as confirmed by ESR spectra,ultraviolet-visible-near-infrared(UV-vis-NIR)absorption,and work function analysis,and enhances the electronic conductivity of PBBT-2T films by over four orders of magnitude.Furthermore,DPI-TPFB exhibited broad doping applicability,effectively doping various p-type OSCs and even imparting p-type characteristics to the n-type OSC N2200,transforming its intrinsic n-type behavior into p-type.The application of DPI-TPFB-doped PBBT-2T films in organic thermoelectric devices(OTEs)was also explored,achieving a power factor of approximately 10μW·m^(-1)·K^(-2).These findings highlight the potential of DPI-TPFB as a versatile and efficient dopant for integration into organic optoelectronic and thermoelectric devices.展开更多
Imagine a beanie that“sees”traffic lights for the visually impaired,or a shirt that doubles as a high-speed data receiver.These aren’t sci-fi fantasies-they’re the first threads of a revolution sparked by ultra-th...Imagine a beanie that“sees”traffic lights for the visually impaired,or a shirt that doubles as a high-speed data receiver.These aren’t sci-fi fantasies-they’re the first threads of a revolution sparked by ultra-thin,flexible semiconductor fibers.In a Nature study published February 2024,researchers from the Chinese Academy of Sciences and Nanyang Technological University unveiled a breakthrough in producing high-performance optoelectronic fibers,overcoming decades-old engineering hurdles.展开更多
基金This work was supported by the National Key Research and Development Program of China(Grant No.2018YFB2200100)the Key Research Program of the Chinese Academy of Sciences(Grant No.XDPB22)+1 种基金the National Natural Science Foundation of China(Grant No.118764347,11614003,11804333)H.X.D.was also supported by the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2017154).
文摘Band offset in semiconductors is a fundamental physical quantity that determines the performance of optoelectronic devices.However,the current method of calculating band offset is difficult to apply directly to the large-lattice-mismatched and heterovalent semiconductors because of the existing electric field and large strain at the interfaces.Here,we proposed a modified method to calculate band offsets for such systems,in which the core energy level shifts caused by heterovalent effects and lattice mismatch are estimated by interface reconstruction and the insertion of unidirectional strain structures as transitions,respectively.Taking the Si and III-V systems as examples,the results have the same accuracy as what is a widely used method for small-lattice-mismatched systems,and are much closer to the experimental values for the large-lattice-mismatched and heterovalent systems.Furthermore,by systematically studying the heterojunctions of Si and III-V semiconductors along different directions,it is found that the band offsets of Si/InAs and Si/InSb systems in[100],[110]and[111]directions belong to the type I,and could be beneficial for silicon-based luminescence performance.Our study offers a more reliable and direct method for calculating band offsets of large-lattice-mismatched and heterovalent semiconductors,and could provide theoretical support for the design of the high-performance silicon-based light sources.
文摘Under hydrothermal and solvothermal conditions,two novel cobalt-based complexes,{[Co_(2)(CIA)(OH)(1,4-dtb)]·3.2H_(2)O}n(HU23)and{[Co_(2)(CIA)(OH)(1,4-dib)]·3.5H2O·DMF}n(HU24),were successfully constructed by coordinatively assembling the semi-rigid multidentate ligand 5-(1-carboxyethoxy)isophthalic acid(H₃CIA)with the Nheterocyclic ligands 1,4-di(4H-1,2,4-triazol-4-yl)benzene(1,4-dtb)and 1,4-di(1H-imidazol-1-yl)benzene(1,4-dib),respectively,around Co^(2+)ions.Single-crystal X-ray diffraction analysis revealed that in both complexes HU23 and HU24,the CIA^(3-)anions adopt aκ^(7)-coordination mode,bridging six Co^(2+)ions via their five carboxylate oxygen atoms and one ether oxygen atom.This linkage forms tetranuclear[Co4(μ3-OH)2]^(6+)units.These Co-oxo cluster units were interconnected by CIA^(3-)anions to assemble into 2D kgd-type structures featuring a 3,6-connected topology.The 2D layers were further connected by 1,4-dtb and 1,4-dib,resulting in 3D pillar-layered frameworks for HU23 and HU24.Notably,despite the similar configurations of 1,4-dtb and 1,4-dib,differences in their coordination spatial orientations lead to topological divergence in the 3D frameworks of HU23 and HU24.Topological analysis indicates that the frameworks of HU23 and HU24 can be simplified into a 3,10-connected net(point symbol:(4^(10).6^(3).8^(2))(4^(3))_(2))and a 3,8-connected tfz-d net(point symbol:(4^(3))_(2)((4^(6).6^(18).8^(4)))),respectively.This structural differentiation confirms the precise regulatory role of ligands on the topology of metal-organic frameworks.Moreover,the ultraviolet-visible absorption spectra confirmed that HU23 and HU24 have strong absorption capabilities for ultraviolet and visible light.According to the Kubelka-Munk method,their bandwidths were 2.15 and 2.08 eV,respectively,which are consistent with those of typical semiconductor materials.Variable-temperature magnetic susceptibility measurements(2-300 K)revealed significant antiferromagnetic coupling in both complexes,with their effective magnetic moments decreasing markedly as the temperature lowered.CCDC:2457554,HU23;2457553,HU24.
基金supported by the National Natural Science Foundation of China(Nos.12274335 and 52202111)the Natural Science Foundation of Shaanxi Province(Nos.2022JM-008,2021JC-062,and 2019TD-020)This research used the resources of the HPCC platform in Xi’an Jiaotong University.
文摘III-V semiconductors such as GaAs are widely studied as promising candidates for high-speed integrated circuit.Despite these applications for conventional bulk structures,their fundamental physical properties in the nanoscale limit are still in scarcity,which is of great importance for the development of nanoelectronics.In this work,we demonstrate that the III-V semiconductor MX(M=Al,Ga,In;X=P,As,Sb)in its two-dimensional(2D)limit could exhibit double layer honeycomb(DLHC)configuration and distorted tetrahedral coordination,according to our first-principles calculations with HSE06 hybrid functional.It is found that surface reconstruction endows 2D III-V DLHCs with pronouncedly different electronic and magnetic properties from their bulk counterparts due to strong interlayer coupling.Mexican-hat-shape bands emerge at the top valence bands of pristine AlP,GaP,InP,AlAs,and InAs DLHCs,inducing the density of states showing a sharp van Hove singularity near the Fermi level.As a result,these DLHCs exhibit itinerant magnetism upon moderate hole doping,while the rest GaAs,AlSb,GaSb,and InSb DLHCs become magnetic under tensile strain with hole doping.With an exchange splitting of the localized pz states at the top valence bands,the hole-doped III-V DLHCs become half-metals with 100%spin-polarization.Remarkably,the InSb DLHC shows inverted band structure near the Fermi level,bringing about nontrivial topological band structures in stacked InSb DLHC due to the strong spin-orbital coupling.These III-V DLHCs expand the members of 2D material family and their exotic magnetic and topological properties may offer great potential for applications in the novel electronic and spintronic devices.
文摘In recent years, the narrow bandgap antimonide based compound semiconductors (ABCS) are widely regarded as the first candidate materials for fabrication of the third generation infrared photon detectors and integrated circuits with ultra-high speed and ultra-low power consumption. Due to their unique bandgap structure and physical properties, it makes a vast space to develop various novel devices, and becomes a hot research area in many developed countries such as USA, Japan, Germany and Israel etc. Research progress in the preparation and application of ABCS materials, existing problems and some latest results are briefly introduced.
文摘The effect of doping concentrations and a transverse external magnetostatic field on operational characteristics of parametric amplification of backward Stokes signal has been studied, using hydrodynamic model of semiconductors, in the far infrared regime. The model suggests three achievable resonance conditions: (i) lattice frequency and plasma frequency (ii) stokes frequency and electron-cyclotron frequency (iii) stokes frequency and hybrid (plasma and electron-cyclotron) frequency and these conditions have been utilised, on one hand, to substantially reduce the value of threshold intensity for onset of the parametric amplification and on the other hand, for switching of parametric large positive and negative gain coefficient (i.e. amplification and absorption). For example a strong transverse magnetostatic field 10.0 T with free carrier concentration 1.5 x 1019m-3 enhances the gain by a factor of 103 as in its absence. Results also suggest that a weakly piezoelectric III–V semiconductor duly illuminated by slightly off-resonant not-too-high-power pulsed lasers with pulse duration sufficiently larger than the acoustic phonon lifetime is one of promising hosts for parametric amplifier/frequency converter.
基金supported by the National Natural Science Foundation of China(62374150)Natural Science Foundation of Henan(242300421216)+3 种基金C.Zheng acknowledges the support of China Postdoctoral Science Foundation(Grant No.2023TQ0296)the Postdoctoral Fellowship Program of CPSF(Grant No.GZC20232389)Y.Xie acknowledges the support of National Natural Science Foundation of China(62074011,62134008)Beijing Outstanding Young Scientist Program(JWZQ20240102009).
文摘Semiconductor optoelectronics devices,capable of converting electrical power into light or conversely light into electrical power in a compact and highly efficient manner represent one of the most advanced technologies ever developed,which has profoundly reshaped the modern life with a wide range of applications.In recent decades,semiconductor technology has rapidly evolved from first-generation narrow bandgap materials(Si,Ge)to the latest fourth-generation ultra-wide bandgap semiconductor(GaO,diamond,AlN)with enhanced performance to meet growing demands.Additionally,merging semiconductor devices with other techniques,such as computer assisted design,state-of-the-art micro/nano fabrications,novel epitaxial growth,have significantly accelerated the development of semiconductor optoelectronics devices.Among them,integrating metasurfaces with semiconductor optoelectronic devices have opened new frontiers for on-chip control of their electromagnetic response,providing access to previously inaccessible degrees of freedom.We review the recent advances in on-chip control of a variety of semiconductor optoelectronic devices using integrated metasurfaces,including semiconductor lasers,semiconductor light emitting devices,semiconductor photodetectors,and low dimensional semiconductors.The integration of metasurfaces with semiconductors offers wafer-level ultracompact solutions for manipulating the functionalities of semiconductor devices,while also providing a practical platform for implementing cuttingedge metasurface technology in real-world applications.
基金Supported by Bissell Distinguished Professor Endowment Fund at UNC-Charlotte。
文摘Although there are numerous optical spectroscopy techniques and methods that have been used to extract the fundamental bandgap of a semiconductor,most of them belong to one of these three approaches:(1)the excitonic absorption,(2)modulation spectroscopy,and(3)the most widely used Tauc-plot.The excitonic absorption is based on a many-particle theory,which is physically the most correct approach,but requires more stringent crystalline quality and appropriate sample preparation and experimental implementation.The Tauc-plot is based on a single-particle theo⁃ry that neglects the many-electron effects.Modulation spectroscopy analyzes the spectroscopy features in the derivative spectrum,typically,of the reflectance and transmission under an external perturbation.Empirically,the bandgap ener⁃gy derived from the three approaches follow the order of E_(ex)>E_(MS)>E_(TP),where three transition energies are from exci⁃tonic absorption,modulation spectroscopy,and Tauc-plot,respectively.In principle,defining E_(g) as the single-elec⁃tron bandgap,we expect E_(g)>E_(ex),thus,E_(g)>E_(TP).In the literature,E_(TP) is often interpreted as E_(g),which is conceptual⁃ly problematic.However,in many cases,because the excitonic peaks are not readily identifiable,the inconsistency be⁃tween E_(g) and E_(TP) becomes invisible.In this brief review,real world examples are used(1)to illustrate how excitonic absorption features depend sensitively on the sample and measurement conditions;(2)to demonstrate the differences between E_(ex),E_(MS),and E_(TP) when they can be extracted simultaneously for one sample;and(3)to show how the popular⁃ly adopted Tauc-plot could lead to misleading results.Finally,it is pointed out that if the excitonic absorption is not ob⁃servable,the modulation spectroscopy can often yield a more useful and reasonable bandgap than Tauc-plot.
文摘Radiation doses to patients in diagnostics and interventional radiology need to be optimized to comply with the principles of radiation protection in medical practice. This involves using specific detectors with respective diagnostic beams to carry out quality control/quality assurance tests needed to optimize patient doses in the hospital. Semiconductor detectors are used in dosimetry to verify the equipment performance and dose to patients. This work aims to assess the performance, energy dependence, and response of five commercially available semiconductor detectors in RQR, RQR-M, RQA, and RQT at Secondary Standard Dosimetry for clinical applications. The diagnostic beams were generated using Exradin A4 reference ion chamber and PTW electrometer. The ambient temperature and pressure were noted for KTP correction. The detectors designed for RQR showed good performance in RQT beams and vice versa. The detectors designed for RQR-M displayed high energy dependency in other diagnostic beams. The type of diagnostic beam quality determines the response of semiconductor detectors. Therefore, a detector should be calibrated according to the beam qualities to be measured.
基金National Natural Science Foundation of China(12002196,12102140)。
文摘Semiconductors and related fields today hold vast application prospects.The semiconductor wafer fabrication process involves steps such as substrate preparation and epitaxy,which occur in high-temperature corrosive environments.Consequently,components like crucibles,susceptors and wafer carriers require carbon-based materials such as graphite and carbon-carbon composites.However,traditional carbon materials underperform in these extreme conditions,failing to effectively address the challenges.This leads to issues including product contamination and shortened equipment lifespan.Therefore,effective protection of carbon materials is crucial.This paper reviews current research status on the preparation methods and properties of corrosion-resistant coatings within relevant domestic and international fields.Preparation methods include various techniques such as physical vapor deposition(PVD),chemical vapor deposition(CVD)and the sol-gel method.Furthermore,it offers perspectives on future research directions for corrosion-resistant coated components in semiconductor equipment.These include exploring novel coating materials,improving coating preparation processes,enhancing coating corrosion resistance,as well as further investigating the interfacial interactions between coatings and carbon substrates to achieve better adhesion and compatibility.
基金Supported by the National Key Research and Development Program of China(2021YFB2012601)National Natural Science Foundation of China(12204109)+1 种基金Science and Technology Innovation Plan of Shanghai Science and Technology Commission(21JC1400200)Higher Education Indus⁃try Support Program of Gansu Province(2022CYZC-06)。
文摘Organic semiconductor materials have shown unique advantages in the development of optoelectronic devices due to their ease of preparation,low cost,lightweight,and flexibility.In this work,we explored the application of the organic semiconductor Y6-1O single crystal in photodetection devices.Firstly,Y6-1O single crystal material was prepared on a silicon substrate using solution droplet casting method.The optical properties of Y6-1O material were characterized by polarized optical microscopy,fluorescence spectroscopy,etc.,confirming its highly single crystalline performance and emission properties in the near-infrared region.Phototransistors based on Y6-1O materials with different thicknesses were then fabricated and tested.It was found that the devices exhibited good visible to near-infrared photoresponse,with the maximum photoresponse in the near-infrared region at 785 nm.The photocurrent on/off ratio reaches 10^(2),and photoresponsivity reaches 16 mA/W.It was also found that the spectral response of the device could be regulated by gate voltage as well as the material thickness,providing important conditions for optimizing the performance of near-infrared photodetectors.This study not only demonstrates the excellent performance of organic phototransistors based on Y6-1O single crystal material in near-infrared detection but also provides new ideas and directions for the future development of infrared detectors.
基金supported by the National Key R&D Program of China(Grant No.2022YFA1405100)Chinese Academy of Sciences Project for Young Scientists in Basic Research(Grant No.YSBR-030)+3 种基金the Basic Research Program of the Chinese Academy of Sciences Based on Major Scientific Infrastructures(Grant No.JZHKYPT-2021-08)GS was supported in part by the Innovation Program for Quantum Science and Technology(Grant No.2024ZD03005)the National Natural Science Foundation of China(Grant No.12447101)Chinese Academy of Sciences.
文摘Realizing ferromagnetic semiconductors with high Curie temperature TC is still a challenge in spintronics.Recent experiments have reported two-dimensional(2D)room temperature ferromagnetic metals,such as monolayer Cr_(3)Te_(6).In this paper,through density functional theory(DFT)calculations,we propose a method to obtain 2D high TC ferromagnetic semiconductors through element replacement in these ferromagnetic metals.We predict that monolayer(Cr_(4/6),Mo_(2/6))_(3)Te_(6),created via element replacement in monolayer Cr_(3)Te_(6),is a room-temperature ferromagnetic semiconductor exhibiting a band gap of 0.34 eV and a TC of 384 K.Our analysis reveals that the metal-to-semiconductor transition stems from the synergistic interplay of Mo-induced lattice distortion,which resolves band overlap,and the electronic contributions of Mo dopants,which further drive the formation of a distinct band gap.The origin of the high TC is traced to strong superexchange coupling between magnetic ions,analyzed via the superexchange model with DFT and Wannier function calculations.Considering the fast developments in fabrication and manipulation of 2D materials,our theoretical results propose an approach to explore high-temperature ferromagnetic semiconductors derived from experimentally obtained 2D high-temperature ferromagnetic metals through element replacement.
基金financially supported by the Program of the National Natural Science Foundation of China(Grant No.52371055)the Young Elite Scientist Sponsorship Program Cast(Grant No.YESS20200139)the Basic Scientific Research Project of Liaoning Provincial Department of Education(Grant No.JYTMS20230618)。
文摘The effect of intermetallic particles on the corrosion of 6061 aluminum alloy and its coating used in semiconductor processing systems was systematically studied via liquid and gas experiments and micromorphology characterization.The results revealed that a huge difference of corrosion resistance between imported and domestic 6061 aluminum alloys in HCl solution and gas acid mist experiments mainly was attributed to the different size and amount of Al_(15)(Fe,Mn)_(3)Si_(2).The corrosion resistance of domestic 6061 alloy in dry/wet semiconductor electronic special gas environments was worse than that of imported aluminum alloy,and there are great differences in the corrosion mechanism of 6061 alloy caused by the second phase in the two dry/wet environments.And the corrosion resistance of the hard anodized alumina film was closely related to the microscopic morphology of holes.The vertical and elongatedα-Al_(15)(Mn,Fe)_(3)Si_(2) phase was formed in the rolled aluminum alloy that has been rolled perpendicular to the surface of the substrate.Compared to the horizontal long hole,the longitudinal long holes generated by the verticalα-Al_(15)(Mn,Fe)_(3)Si_(2) phase will enable the corrosive medium to reach the substrate rapidly,which significantly weakens the corrosion resistance of the hard anodized film.
基金supported by the National Key Research and Development Program of China(Grant No.2021YFB2011400)the National Natural Science Foundation of China(Grant No.52375081).
文摘Flexoelectricity,an electromechanical coupling between strain gradient and electrical polarization in dielectrics or semiconductors,has attracted significant scientific interest.It is reported that large flexoelectric behaviors can be obtained at the nanoscale because of the size effect.However,the flexoelectric responses of centrosymmetric semiconductors(CSs)are extremely weak under a conventional beam-bending approach,owing to weak flexoelectric coefficients and small strain gradients.The flexoelectric-like effect is an enhanced electromechanical effect coupling the flexoelectricity and piezoelectricity.In this paper,a composite structure consisting of piezoelectric dielectric layers and a CS layer is proposed.The electromechanical response of the CS is significantly enhanced via antisymmetric piezoelectric polarization.Consequently,the cross-scale mechanically tuned carrier distribution in the semiconductor is realized.Meanwhile,the significant size dependence of the electromechanical fields in the semiconductor is demonstrated.The flexoelectronics suppression is found when the semiconductor thickness reaches a critical size(0.8μm).In addition,the first-order carrier density of the composite structure under local loads is illustrated.Our results can suggest the structural design for flexoelectric semiconductor devices.
文摘All-inorganic CsPbBr_(3) perovskite quantum dots(QDs)have attracted extensive attention in photoelectric detection for their excellent photoelectric properties and stability.However,the CsPbBr_(3) quantum dot film exhibits a high non-radiative recombination rate,and the mismatch in energy levels with the carbon electrode weakens hole extraction efficiency.These reduces the device's performance.To improve this,a semiconductor photodetector based on fluorine-doped tin oxide(FTO)/dense titanium dioxide(c-TiO_(2))/mesoporous titanium dioxide(m-TiO_(2))/CsPbBr_(3) QDs/CsPbBr_(x)I_(3-x)(x=2,1.5,1)QDs/C struc-ture was studied.By adjusting the Br-:I-ratio,the synthesized CsPbBr_(x)I_(3-x)(x=2,1.5,1)QDs showed an adjustable band gap width of 2.284-2.394 eV.And forming a typeⅡband structure with CsPbBr_(3) QDs,which reduced the valence band offset between the active layer and the carbon electrode,this promoted carrier extraction and reduced non-radiative recombination rate.Compared with the original device(the photosensitive layer is CsPbBr_(3) QDs),the performance of the photodetector based on the CsPbBr_(3) QDs/CsPbBr2I QDs heterostructure is significantly improved,the responsivity(R)increased by 73%,the specific detectivity rate(D^(*))increased from 6.98×10^(12) to 3.19×10^(13) Jones,the on/off ratio reached 106.This study provides a new idea for the development of semiconductor tandem detectors.
基金supported by the National Key Research and Development Program of China(Grant Nos.2022YFA1402701 and 2022YFA1403202)the National Natural Science Foundation of China(Grant No.12074333)the Key Research and Development Program of Zhejiang Province,China(Grant No.2021C01002)。
文摘We report the manipulation of ferromagnetism in magnetic semiconductor Ba(Zn,Mn,Cu)_(2)As_(2)through chemical pressure.The substitutions of Sr for Ba and Sb for As introduce positive and negative chemical pressures,respectively;neither Sr doping nor Sb doping change the tetragonal crystal structure.Based on Ba(Zn_(0.75)Mn_(0.125)Cu_(0.125))_(2)As_(2)with T_(C)~34 K,10%Sr/Ba substitutions significantly improve T_(C)by~15%to 39 K,whereas 10%Sb/As substitutions substantially reduce TCby~47%to 18 K.The AC magnetic susceptibility measurements indicate that Sr-doped and Sb-doped samples evolve into a spin glass state below the spin freezing temperature Tf.Electrical transport measurements demonstrate that Sr-doped specimens retain semiconducting behavior;additionally,they display a significant negative magnetoresistance effect under applied magnetic fields and the magnetoresistance reaches~-19%at 8 T.
基金supported by the National Natural Science Foundation of China(Grant Nos.52272219 and U1904612)the Natural Science Foundation of Henan Province(Grant No.242300421191).
文摘TiO_(2)is a well-known photocatalyst with a band gap of 3.2 eV,yet its ability to absorb light is limited to the short wavelengths of ultraviolet light.To achieve a more effective photocatalytic material,we have designed two-dimensional semiconductor TiOS materials using swarm intelligence algorithms combined with first-principles calculations.Three stable low-energy structures with space groups of P2_(1)/m,P3m1 and P2_(1)/c are identified.Among these structures,the Janus P3m1 phase is a direct bandgap semiconductor,while the P2_(1)/m and P2_(1)/c phases are indirect bandgap semiconductors.Utilizing the accurate hybrid density functional HSE06 method,the band gaps of the three structures are calculated to be 2.34 eV(P2_(1)/m),2.24 eV(P3m1)and 3.22 eV(P2_(1)/c).Optical calculations reveal that TiOS materials exhibit a good light-harvesting capability in both visible and ultraviolet spectral ranges.Moreover,the photocatalytic calculations also indicate that both P2_(1)/m and P3m1 TiOS can provide a strong driving force for converting H_(2)O to H_(2)and O_(2)in an acidic environment with pH=0.The structural stabilities,mechanical properties,electronic structures and hydrogen evolution reaction activities are also discussed in detail.Our research suggests that two-dimensional TiOS materials have potential applications in both semiconductor devices and photocatalysis.
基金supported by the National Natural Science Foundation of China(No.12272353)the Postdoctoral Research Grant in Henan Province of China(No.202003091)the Key Scientific Research Projects in Colleges and Universities of Henan Province of China(No.22A130008)。
文摘The fracture mechanics theory posits that cracks induce strain energy concentration near their tips in structural components,generating localized flexibility that impedes crack propagation.Theoretically,cracks are represented as dimensionless,massless spring models,effectively capturing crack characteristics and cross-sectional properties at the crack location.Leveraging this spring-based representation,this study establishes an open-crack model for a one-dimensional(1D)piezoelectric semiconductor(PSC)curved beam under dynamic loading.This model enables the investigation of vibration characteristics in cracked structures.The analytical solutions for the electromechanical fields of the beam are derived using the differential operator method,and the natural frequencies together with the corresponding generalized mode shapes of the beam are determined analytically.Furthermore,the effects of the crack parameters on the natural vibration characteristics of the PSC curved beam are analyzed.
基金supported by the Program of the National Natural Science Foundation of China(Grant No.52371055)the Young Elite Scientist Sponsorship Program Cast(Grant No.YESS20200139)+1 种基金the Basic Scientific Research Project of Liaoning Provincial Department of Education(Grant No.JYTMS20230618)Special thanks are due to the instrumental analysis from the Analytical and Testing Centre,Northeastern University.
文摘A principle was proposed for designing a method to seal anodized aluminum used in semiconductor processing apparatuses.Thermodynamic calculations and Fick’s second law were used to reveal trends in the metal ion deposition,deposition product stability,vapor pressures of halides for selected metal ions,the holding temperature,and time.Interactions between ion concentrations and the sealing temperature were also revealed.According to the design principles,anodized aluminum dipped in 1 mM Cr^(3+)ion solution and steam-sealed for 18 h exhibited the highest corrosion resistance when exposed to 5 wt.%HCl solution and HCl gas,verifying the designed results.
基金supported by the Fundamental Research Program of Shanxi Province(Nos.202303021212159 and 202303021222190)the National Natural Science Foundation of China(No.62222403)+2 种基金the Higher Education Institutions Science and Technology Innovation Program of Shanxi Province(No.2023L160)the Scientific Research Fund of Hunan Provincial Education Department(No.23B0842)the Natural Science Foundation of Shanxi Normal University(Nos.JCYJ2024017 and JCYJ2023015)。
文摘Doping plays a pivotal role in enhancing the performance of organic semiconductors(OSCs)for advanced optoelectronic and thermoelectric applications.In this study,we systematically investigated the doping performance and applicability of the ionic dopant 4-isopropyl-4′-methyldiphenyliodonium tetrakis(penta-fluorophenyl-borate)(DPI-TPFB)as a p-dopant for OSCs.Using the p-type OSC PBBT-2T as a model system,we demonstrated that DPI-TPFB shows significant doping effect,as confirmed by ESR spectra,ultraviolet-visible-near-infrared(UV-vis-NIR)absorption,and work function analysis,and enhances the electronic conductivity of PBBT-2T films by over four orders of magnitude.Furthermore,DPI-TPFB exhibited broad doping applicability,effectively doping various p-type OSCs and even imparting p-type characteristics to the n-type OSC N2200,transforming its intrinsic n-type behavior into p-type.The application of DPI-TPFB-doped PBBT-2T films in organic thermoelectric devices(OTEs)was also explored,achieving a power factor of approximately 10μW·m^(-1)·K^(-2).These findings highlight the potential of DPI-TPFB as a versatile and efficient dopant for integration into organic optoelectronic and thermoelectric devices.
文摘Imagine a beanie that“sees”traffic lights for the visually impaired,or a shirt that doubles as a high-speed data receiver.These aren’t sci-fi fantasies-they’re the first threads of a revolution sparked by ultra-thin,flexible semiconductor fibers.In a Nature study published February 2024,researchers from the Chinese Academy of Sciences and Nanyang Technological University unveiled a breakthrough in producing high-performance optoelectronic fibers,overcoming decades-old engineering hurdles.
