As the speeds of trains increase,higher demands are placed on brake materials.In order to overcome the thermal degradation phenomenon of brake pads during high-speed braking,we prepared copper fiber reinforced alkali-...As the speeds of trains increase,higher demands are placed on brake materials.In order to overcome the thermal degradation phenomenon of brake pads during high-speed braking,we prepared copper fiber reinforced alkali-activated slag composite(AASC)friction materials by hot-pressing method,using slag as matrix,Na_(2)SiO_(3)·9H_(2)O as alkali excitant,copper fiber as reinforcement,and graphite as friction modifier.The results show that the AASC prepared by hot-pressing method has undergone alkali-activated reaction and has geopolymer amorphous characteristics as the conventional cast molding AASC by XRD analysis.The addition of copper fibers can improve the mechanical strength and toughness of the composites substantially,and the AASC has the highest flexural strength,compressive strength and impact toughness when the volume fraction of copper fibers reaches 25 vol%.Toughening mechanisms such as drawing,bridging and crack deflection of copper fibers in composites were analyzed by SEM morphology.Addition of appropriate amount of graphite to AASC can effectively reduce the wear rate and improve the stability of the material friction coefficient.The coefficient of friction also remains stable in the high-speed friction experiments without thermal degradation.Therefore,copper fiber reinforced AASC friction materials prepared by hot-pressing method has good mechanical and friction properties.展开更多
Xishui National Forest Park in Heilongjiang Province hosts China's most pristine temperate forests and serves as a key site for ecotourism and forest therapy.However,the emission patterns of phytoncides(key bio ac...Xishui National Forest Park in Heilongjiang Province hosts China's most pristine temperate forests and serves as a key site for ecotourism and forest therapy.However,the emission patterns of phytoncides(key bio active compounds) remain poorly understood,limiting their therapeutic application.This study provides the first comprehensive characterization of spatiotemporal dynamics in airborne phytoncides and their synergistic interactions with environmental factors throughout the autumn-early spring seasonal transition in a temperate forest ecosystem.We analyzed the compositional dynamics of phytoncides and terpenoid content variations using thermal desorption-gas chromatography-mass spectrometry(TD-GC-MS) from September 2024 to March 2025.This period encompassed seasonal transitions from autumn to early spring,including diurnal variations in September and snowfall events in November.The method demonstrated detection limits(LODs) ranging from 1.35 to 5.33 ng m-3 and quantification limits(LOQs) from 4.09 to 16.15 ng m-3.Our results revealed pronounced seasonal fluctuations in phytoncide composition.In September,terpenoids,esters,alcohols,and alkanes displayed a diurnal "decrease-increase" trend,whereas aldehydes and ketones peaked at midday.Notably,esters and alcohols were undetectable in November and January.By January,terpenoids reached their lowest proportion(0.17±0.02%) at noon.Five terpenoids(α-pinene,myrcene,D-limonene,camphene,p-cymene) were detected in September,four(α-pinene,D-limonene,camphene,p-cymene) in November,two(D-limonene,p-cymene) in January,and only p-cymene in March.The total concentration and emission rate of the five terpenoids peaked in September afternoons at 1961.58±106.67 ng m^(-3) and653.86±35.56 ng m^(-3) h^(-1),respectively.Nocturnal emissions(32131.95±2522.21 ng m^(-3)) significantly surpassed daytime levels(14473.04±958.49 ng m^(-3)),with emission rates escalating from 1447.30±95.85 ng m^(-3) h^(-1)(day) to 5355.33±420.37 ng m^(-3) h^(-1)(night),marking a3.7-fold increase.Snowfall dramatically elevated terpenoid concentrations(pre-snowfall:158.58±14.12 ng m^(-3);post-snowfall:1080.57±57.76 ng m^(-3)) and emission rates(pre-snowfall:52.86±4.71 ng m^(-3) h^(-1);post-snowfall:360.19±19.25 ng m^(-3) h^(-1)),reflecting a 6.8-fold surge.This study underscores the profound influence of light intensity,seasonal shifts,and climatic conditions on airborne phytoncide levels,offering a scientific foundation for optimizing forest therapy and ecotourism strategies.展开更多
The performance of data restore is one of the key indicators of user experience for backup storage systems.Compared to the traditional offline restore process,online restore reduces downtime during backup restoration,...The performance of data restore is one of the key indicators of user experience for backup storage systems.Compared to the traditional offline restore process,online restore reduces downtime during backup restoration,allowing users to operate on already restored files while other files are still being restored.This approach improves availability during restoration tasks but suffers from a critical limitation:inconsistencies between the access sequence and the restore sequence.In many cases,the file a user needs to access at a given moment may not yet be restored,resulting in significant delays and poor user experience.To this end,we present Histore,which builds on the user’s historical access sequence to schedule the restore sequence,in order to reduce users’access delayed time.Histore includes three restore approaches:(i)the frequency-based approach,which restores files based on historical file access frequencies and prioritizes ensuring the availability of frequently accessed files;(ii)the graph-based approach,which preferentially restores the frequently accessed files as well as their correlated files based on historical access patterns,and(iii)the trie-based approach,which restores particular files based on both users’real-time and historical access patterns to deduce and restore the files to be accessed in the near future.We implement a prototype of Histore and evaluate its performance from multiple perspectives.Trace-driven experiments on two datasets show that Histore significantly reduces users’delay time by 4-700×with only 1.0%-14.5%additional performance overhead.展开更多
Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges...Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges.There has been a lack of a comprehensive and multidimensional assessment to inform strategic conservation planning.Therefore,this study integrated 4 key biodiversity indices including species richness(SR),phylogenetic diversity(PD),threatened species richness(TSR),and endemic species richness(ESR)to map species diversity distribution patterns,identify conservation gaps,and elucidate their effects of climatic factors.This study revealed that species diversity shows a clear trend of decreasing from the western region to the eastern region of Tajikistan.The central–western mountains(specifically the Gissar-Darvasian and Zeravshanian regions)emerge as irreplaceable biodiversity hotspots.However,we found a severe spatial mismatch between these priority areas and the existing protected areas(PAs).Protection coverage for all hotspots was alarmingly low,ranging from 31.00%to 38.00%.Consequently,a critical 64.80%of integrated priority areas fall outside of the current PAs,representing a major conservation gap.This study identified precipitation seasonality and isothermality as the principal drivers,collectively explaining over 50.00%of the diversity variation and suggesting high vulnerability to hydrological shifts.Furthermore,we detected significant geographic sampling bias in the public biodiversity databases,with the most critical hotspot being systematically under-sampled.This study provides a robust scientific basis for conservation action,highlighting the urgent need to strategically expand PAs in the under-protected southwestern region and to mitigate critical sampling gaps through targeted data digitization and field surveys.These measures are indispensable for securing Tajikistan’s unique biodiversity and achieving the Kunming-Montreal Global Biodiversity Framework Target 3(“30×30 Protection”).展开更多
A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforat...A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress.Introducing precurved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment,and even make the frequency higher with appropriate structural parameters.The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components.The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap.A simplified model is established for the local structure of the precurved component.The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models.The transmittance of flexural wave validates the effectiveness of the proposed design.展开更多
BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Resear...BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.展开更多
Global grassland degradation necessitates the identification of sustainable grazing management strategies.In semi-arid regions,grazing exclusion(GE),cold-season grazing(CG),and free grazing(FG)represent common practic...Global grassland degradation necessitates the identification of sustainable grazing management strategies.In semi-arid regions,grazing exclusion(GE),cold-season grazing(CG),and free grazing(FG)represent common practices in grassland ecosystems,yet the long-term ecological consequences of these patterns on plant community structure and soil aggregate stability remain inadequately elucidated.In this study,we evaluated the effects of GE,CG,and FG on soil organic carbon,soil water content,soil bulk density,soil aggregates,and vegetation indicators in Xilamuren steppe,a semi-arid grassland in northern China through field sampling and laboratory analyses in 2024.Our findings revealed that,compared to CG and FG,GE significantly enhanced aboveground and belowground biomass,species diversity,and soil physical-chemical properties in the 0–30 cm layer.The dominant plant species in GE and CG sites were Stipa krylovii,Leymus chinensis,and Agropyron cristatum,whereas Stipa krylovii,Artemisia frigida,and Leymus chinensis were predominant in FG site.Different grazing patterns led to distinct soil aggregate distributions,with>2.00 and<0.25 mm aggregates exhibiting the highest content in different soil layers depending on the grazing patterns.All grazing management strategies significantly improved soil aggregate stability,with the overall stability following the order:GE>CG>FG.Furthermore,random forest modeling identified plant species diversity,plant growth traits,and grazing patterns as the primary determinants of soil aggregate stability.Collectively,these results offer valuable insights into the sustainable management and ecological restoration of semi-arid grasslands under different grazing pressures.展开更多
Enamel,the inorganic tissue covering the crowns of teeth,is known for its remarkable resilience and hardness.These properties originate from its high proportion of mineralized matrix and complex internal microarchitec...Enamel,the inorganic tissue covering the crowns of teeth,is known for its remarkable resilience and hardness.These properties originate from its high proportion of mineralized matrix and complex internal microarchitecture.On an ultrastructural level,it consists of directionally arranged enamel prisms.Continuously growing rodent incisors are an exemplary case of this phenomenon.Their enamel has a consistent decussation pattern,providing teeth with extremely high resistance and ensuring they remain constantly sharp.While the decussation pattern has been described in detail,mechanisms behind its formation have not been experimentally proven.Here,we show that the highly organized enamel micropattern is generated by directional epithelial sliding of enamel-forming ameloblasts in vivo.Our results detail how enamel micropatterning stems from individual cell cluster segregation and subsequent reciprocal interweaving.Based on this determination,we introduce and experimentally demonstrate a new model of enamel decussation pattern formation.展开更多
Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of mineral...Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of minerals,with reserves of at least 38 of over 80 widely used minerals worldwide accounting for more than30%of the global total reserves.Asia continent experienced three main tectonic evolution and mineralization stages:The Precambrian,the Paleozoic,and the Mesozoic to Cenozoic.The abundant mineral resources in this continent can be divided into seven first-order metallogenic belts(metallogenic domains),18 second-order metallogenic belts(metallogenic provinces),61 third-order metallogenic belts(metallogenic zones),and nine main minerogenetic series.Asia continent exhibits the most significant metallogenic specialization among all continents.Specifically,granite belts of Asia continent manifest pronounced metallogenic specialization of tin,rare metals,and porphyry Cu-Au-Mo deposits.Its maficultramafic rock belts and ophiolite belts display notable metallogenic specialization of lateritic nickel deposits and magmatic type chromite deposits,while its Mesozoic to Cenozoic basalt belts show remarkable metallogenic specialization of lateritic bauxite deposits.Consequently,many giant metallogenic belts were formed,including the Southeast Asian tin belt,the Qinghai-Xizang Plateau rare metal metallogenic belt,the Tethyan porphyry Cu-Au-Mo metallogenic belt,the circum-Pacific porphyry Cu-Au-Mo metallogenic belt,the Southeast Asian lateritic bauxite metallogenic belt,the Deccan Plateau lateritic bauxite metallogenic belt in India,the Southeast Asian lateritic nickel metallogenic belt,and the Tethyan magmatic type chromite metallogenic belt—all of which are significant metallogenic belts in Asia continent.Future mineral exploration in Asia should focus primarily on the Precambrian mineralization of ancient cratons,the Paleozoic mineralization of the Central Asian-Mongolian orogenic belt,and the Mesozoic to Cenozoic mineralization of the Tethyan and circum-Pacific mobile belts.Asia's mining industry not only underpins its own economic growth but also propels global economic development and industrialization,contributing significantly to the world economy.Asia boasts the highest production value of minerals,the largest annual production of minerals,and the greatest trade value of mineral products among all the continents,having emerged as the trade center of global mineral products and the center of the mining industry economy.China is identified as one of the few countries that possess the most comprehensive kinds of minerals,and its mining industry has supported and driven the economic development and industrialization of Asia and even the world.Standing as the largest mineral producer worldwide,China ranked first in the production of 28 mineral commodities in the world in 2022.Besides,China exhibits the highest annual production value of minerals and the largest trade value of mineral products among all countries.Therefore,China's demand for global mineral products influences the global supply and demand patterns of minerals and the world economic situation.展开更多
HyperCoal was prepared from low-rank coal via high-temperature solvent extraction with N-methylpyrrolidone as an extraction solvent and a liquid-to-solid ratio of 50 mL/g in a high-temperature and high-pressure reacto...HyperCoal was prepared from low-rank coal via high-temperature solvent extraction with N-methylpyrrolidone as an extraction solvent and a liquid-to-solid ratio of 50 mL/g in a high-temperature and high-pressure reactor. When HyperCoal was used as a binder and pulverized coal was used as the raw material, the compressive strength of the hot-pressed briquettes(each with a diameter of 20 mm and mass of 5 g) under different conditions was studied using a hot-pressing mold and a high-temperature furnace. The compressive strength of the hot-pressed briquettes was substantially improved and reached 436 N when the holding time period was 15 min, the hot-pressing temperature was 673 K, and the HyperCoal content, was 15 wt%. Changes in the carbonaceous structure, as reflected by the intensity ratio between the Raman G-and D-bands(IG/ID), strongly affected the compressive strength of hot-pressed briquettes prepared at different hot-pressing temperatures. Compared with cold-pressed briquettes, hot-pressed briquettes have many advantages, including high compressive strength, low ash content, high moisture resistance, and good thermal stability; thus, we expect that hot-pressed briquettes will have broad application prospects.展开更多
Piezoelectric poly(vinylidene fluoride)(PVDF)has received considerable attention due to its ability of interconverting mechanical into electric energies and potential applications in wearable electronics.To achieve pi...Piezoelectric poly(vinylidene fluoride)(PVDF)has received considerable attention due to its ability of interconverting mechanical into electric energies and potential applications in wearable electronics.To achieve piezoelectricity,it is important to simultaneously control the formation of polar phases,crystallinity,and dipole alignments in PVDF-based films.Here we demonstrate that piezoelectricity can be obtained by directly hot-pressing PVDF films sandwiched between chitosan or cellulose films.The electrostatic interactions between PVDF and chitosan or cellulose enabled an exceptional high content of polar phases(β-andγ-phases)up to 90%and a measured piezoelectric charge coefficient d_(33)of up to-30 pC/N.This study provides a simple and low-cost approach for obtaining piezoelectric PVDF films used for sensors,actuators,and energy harvesters.展开更多
B4Cp/6061Al composites have become important structural and functional materials and can be fabricated by powder metallurgy and subsequent hot rolling. In this work, the effects of the hot-pressing temperature on micr...B4Cp/6061Al composites have become important structural and functional materials and can be fabricated by powder metallurgy and subsequent hot rolling. In this work, the effects of the hot-pressing temperature on microstructures and mechanical behaviors of the B4Cp/6061Al composites were investigated. The results showed that compared with the T4 heat treated B4Cp/6061Al composite hot pressed at 560℃, the yield strength and failure strain of the composites hot pressed at 580℃ were increased to 235 MPa and 18.4%, respectively. This was associated with the interface bonding strength between the B4C particles and the matrix. However, the reaction products, identified to be MgAl2O4 phases, were detected in the composites hot pressed at 600℃. The formation of the MgAl2O4 phases resulted in the Mg depletion, thus reducing the yield strength to 203.5 MPa after the T4 heat treatment due to the effect of the solid solution strengthening being weakened. In addition, the variation of hardness and electrical conductivity was mainly related to the Mg content in the matrix. Based on the as-rolled microstructures observed by SEM, SR-μCT and fracture surfaces, the deformation schematic diagram was depicted to reflect the tensile deformation process of the composites.展开更多
Safety issues induced by infinite anode volume change and uncontrolled lithium(Li)dendrite growth have become the biggest obstacle to the practical application of Li metal batteries.In addition,the tra-ditional rollin...Safety issues induced by infinite anode volume change and uncontrolled lithium(Li)dendrite growth have become the biggest obstacle to the practical application of Li metal batteries.In addition,the tra-ditional rolling method makes it difficult to manufacture thin Li foil with high mechanical strength and low Li content.Herein,a three-dimensional(3D)lithophilic carbon paper/copper(Cu)current collector hybrid anode with ultra-low Li metal content is prepared by a hot-pressing method.The highly re-versible and stable lithiophilic layer LiC_(x) formed in situ by heating/pressing treatment provides abun-dant nucleation sites and reduces the Li nucleation overpotential,thereby effectively suppressing Li den-drite growth.Moreover,the volume change and pulverization problems of Li metal anode during depo-sition/stripping also can be accommodated by the 3D skeleton.The optimization effect has been directly confirmed by in-situ optical and ex-situ scanning electron microscope observation.Therefore,highly sta-ble performance(158.4 mA h g^(-1) at 2 C after 200 cycles with a capacity retention of 95.24%)in Li@LCP-Cu||NCM811 coin cell can be achieved.Furthermore,the solid-state battery assembled with the hybrid anode,poly(vinylidene fluoride)(PVDF)-based polymer electrolyte and polyethylene oxide(PEO)interface functional layer also exhibits the best electrochemical and safety performance,which also proves that the Li@LCP-Cu anode has great potential for application in solid-state batteries.展开更多
A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/ Ni/Mo (hereafter called AI2O3/TiC composite) composite compacts decreases by 6% after adoptin...A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/ Ni/Mo (hereafter called AI2O3/TiC composite) composite compacts decreases by 6% after adopting this new technique, compared to traditional hot-pressing technique under the same sintering temperature. The flexural strength and Vicker hardness increase from 883 MPa to 980 MPa and from 16 GPa to 21.1 GPa, respectively. A theoretical model was given to analyze the densification mechanism of the composite in the process of repetitious-hot-pressing.展开更多
The Nd-Fe-B magnets are pre-sintered and then processed with hot-pressing,and the resulting magnets are called the hot-pressed pretreated(HPP)magnets.The coercivity of the HPP magnets increases as the annealed tempera...The Nd-Fe-B magnets are pre-sintered and then processed with hot-pressing,and the resulting magnets are called the hot-pressed pretreated(HPP)magnets.The coercivity of the HPP magnets increases as the annealed temperature increases.When the annealing temperature is 900℃,the coercivity of the magnet is only 17.6 kOe(1 Oe=79.5775 A·m^-1),but when the annealing temperature rises up to 1060℃,the coercivity of the magnet reaches 23.53 kOe,which is remarkably increased by 33.7%.The microstructure analysis indicates that the grain surface of the HPP magnet becomes smoother as the annealed temperature increases.The microstructure factorαis changed according to the intrinsic coercivity model formula.Theαof the magnet at 900℃is only 0.578,but it is 0.825 at 1060℃.Microstructural optimization is due mainly to the increase of coercivity of the HPP magnet.展开更多
Densification behavior of nanocrystalline Mg2Si （n-Mg2Si） with grain size about 30-50 nm was investigated by hot-pressing at 400℃. The results indicated that the densification process of n-Mg2Si exhibited three lin...Densification behavior of nanocrystalline Mg2Si （n-Mg2Si） with grain size about 30-50 nm was investigated by hot-pressing at 400℃. The results indicated that the densification process of n-Mg2Si exhibited three linear segments： p〈0.3 GPa, 0.3 GPa〈p〈1.2 GPa, and p〉1.2 GPa determined by Heckel formula, among which the third fast increasing segment in high pressure range p〉1.2 GPa has seldom been reported in conventional coarse-grained polycrystalline materials. Nevertheless, in the whole pressure range （0.125-1.500 GPa） investigated the densification behavior of n-Mg2Si can be well described by a Kawakita formula p/C=（1/a）p＋ 1/（ab） with constant α=0.452 being in good agreement with the initial porosity of the compact.展开更多
BN-MgA1ON composites were prepared by hot-pressing sintering under nitrogen atmosphere with BN-Mg- A1ON composite powders as raw material and Y2 O3 as sintering additive. Based on thermodynamic analysis, the oxi- dati...BN-MgA1ON composites were prepared by hot-pressing sintering under nitrogen atmosphere with BN-Mg- A1ON composite powders as raw material and Y2 O3 as sintering additive. Based on thermodynamic analysis, the oxi- dation resistance of BN-MgAION composites was investigated and the dynamics of oxidation process was also ana- lyzed. The oxidation process and the micro-morphology of the samples before and after oxidation were characterized by X-ray diffraction and scanning electron microscopy. The dynamics of oxidation resistance of the BN-MgA1ON composites was investigated via the analysis of the constant temperature oxidation mass gain curves. The results show that the main components of the material are MgA1ON, Sialon, BN and CaYAI3 07 at 1 650--1750 ＊C, and the content of CaYA1307 decreases as the sintering temperature increases. The BN-MgA1ON composites prepared at 1750 ℃ is uniform and compact with the balanced distributions of A1, Mg, O, and N. The oxidation process of BN- MgA1ON composites in air mainly consists of MgAION, Sialon and BN oxidation. The section after being oxidized at 1000--1300 ℃ involves three layers, namely, the outer layer, the middle layer and the inner layer. The oxidation process follows the parabola model. The apparent activation energy of the oxidation process is 2.13 × 10 5 J/mol and the frequency factor is 4.66 × 10 6.展开更多
The preparation of red,green,and blue quantum dot(QD)pixelated arrays with high precision,resolution,and brightness poses a significant challenge on the development of advanced micro-displays for virtual,augmented,and...The preparation of red,green,and blue quantum dot(QD)pixelated arrays with high precision,resolution,and brightness poses a significant challenge on the development of advanced micro-displays for virtual,augmented,and mixed reality applications.Alongside the controlled synthesis of high-performance QDs,a reliable QD patterning technology is crucial in overcoming this challenge.Among the various methods available,photolithography-based patterning technologies show great potentials in producing ultra-fine QD patterns at micron scale.This review article presents the recent advancements in the field of QD patterning using photolithography techniques and explores their applications in micro-display technology.Firstly,we discuss QD patterning through photolithography techniques employing photoresist(PR),which falls into two categories:PRassisted photolithography and photolithography of QDPR.Subsequently,direct photolithography techniques based on photo-induced crosslinking of photosensitive groups and photo-induced ligand cleavage mechanisms are thoroughly reviewed.Meanwhile,we assess the performance of QD arrays fabricated using these photolithography techniques and their integration into QD light emitting diode display devices as well as color conversionbased micro light emitting diode display devices.Lastly,we summarize the most recent developments in this field and outline future prospects.展开更多
Objective weather classification methods have been extensively applied to identify dominant ozone-favorable synoptic weather patterns(SWPs),however,the consistency of different classification methods is rarely examine...Objective weather classification methods have been extensively applied to identify dominant ozone-favorable synoptic weather patterns(SWPs),however,the consistency of different classification methods is rarely examined.In this study,we apply two widely-used objective methods,the self-organizing map(SOM)and K-means clustering analysis,to derive ozone-favorable SWPs at four Chinese megacities in 2015-2022.We find that the two algorithms are largely consistent in recognizing dominant ozone-favorable SWPs for four Chinese megacities.In the case of classifying six SWPs,the derived circulation fields are highly similar with a spatial correlation of 0.99 between the two methods,and the difference in themean frequency of each SWP is less than 7%.The six dominant ozone-favorable SWPs in Guangzhou are all characterized by anomaly higher radiation and temperature,lower cloud cover,relative humidity,and wind speed,and stronger subsidence compared to climatology mean.We find that during 2015-2022,the occurrence of ozone-favorable SWPs days increases significantly at a rate of 3.2 days/year,faster than the increases in the ozone exceedance days(3.0 days/year).The interannual variability between the occurrence of ozone-favorable SWPs and ozone exceedance days are generally consistent with a temporal correlation coefficient of 0.6.In particular,the significant increase in ozone-favorable SWPs in 2022,especially the Subtropical High type which typically occurs in September,is consistent with a long-lasting ozone pollution episode in Guangzhou during September 2022.Our results thus reveal that enhanced frequency of ozone-favorable SWPs plays an important role in the observed 2015-2022 ozone increase in Guangzhou.展开更多
基金Funded by the National Natural Science Foundation of China(No.51236003)the Natural Science Foundation of Gansu Province(No.1506RJZA076)。
文摘As the speeds of trains increase,higher demands are placed on brake materials.In order to overcome the thermal degradation phenomenon of brake pads during high-speed braking,we prepared copper fiber reinforced alkali-activated slag composite(AASC)friction materials by hot-pressing method,using slag as matrix,Na_(2)SiO_(3)·9H_(2)O as alkali excitant,copper fiber as reinforcement,and graphite as friction modifier.The results show that the AASC prepared by hot-pressing method has undergone alkali-activated reaction and has geopolymer amorphous characteristics as the conventional cast molding AASC by XRD analysis.The addition of copper fibers can improve the mechanical strength and toughness of the composites substantially,and the AASC has the highest flexural strength,compressive strength and impact toughness when the volume fraction of copper fibers reaches 25 vol%.Toughening mechanisms such as drawing,bridging and crack deflection of copper fibers in composites were analyzed by SEM morphology.Addition of appropriate amount of graphite to AASC can effectively reduce the wear rate and improve the stability of the material friction coefficient.The coefficient of friction also remains stable in the high-speed friction experiments without thermal degradation.Therefore,copper fiber reinforced AASC friction materials prepared by hot-pressing method has good mechanical and friction properties.
基金supported by the Key Research and Development Plan Project of Heilongjiang Province (2022ZX02C13)。
文摘Xishui National Forest Park in Heilongjiang Province hosts China's most pristine temperate forests and serves as a key site for ecotourism and forest therapy.However,the emission patterns of phytoncides(key bio active compounds) remain poorly understood,limiting their therapeutic application.This study provides the first comprehensive characterization of spatiotemporal dynamics in airborne phytoncides and their synergistic interactions with environmental factors throughout the autumn-early spring seasonal transition in a temperate forest ecosystem.We analyzed the compositional dynamics of phytoncides and terpenoid content variations using thermal desorption-gas chromatography-mass spectrometry(TD-GC-MS) from September 2024 to March 2025.This period encompassed seasonal transitions from autumn to early spring,including diurnal variations in September and snowfall events in November.The method demonstrated detection limits(LODs) ranging from 1.35 to 5.33 ng m-3 and quantification limits(LOQs) from 4.09 to 16.15 ng m-3.Our results revealed pronounced seasonal fluctuations in phytoncide composition.In September,terpenoids,esters,alcohols,and alkanes displayed a diurnal "decrease-increase" trend,whereas aldehydes and ketones peaked at midday.Notably,esters and alcohols were undetectable in November and January.By January,terpenoids reached their lowest proportion(0.17±0.02%) at noon.Five terpenoids(α-pinene,myrcene,D-limonene,camphene,p-cymene) were detected in September,four(α-pinene,D-limonene,camphene,p-cymene) in November,two(D-limonene,p-cymene) in January,and only p-cymene in March.The total concentration and emission rate of the five terpenoids peaked in September afternoons at 1961.58±106.67 ng m^(-3) and653.86±35.56 ng m^(-3) h^(-1),respectively.Nocturnal emissions(32131.95±2522.21 ng m^(-3)) significantly surpassed daytime levels(14473.04±958.49 ng m^(-3)),with emission rates escalating from 1447.30±95.85 ng m^(-3) h^(-1)(day) to 5355.33±420.37 ng m^(-3) h^(-1)(night),marking a3.7-fold increase.Snowfall dramatically elevated terpenoid concentrations(pre-snowfall:158.58±14.12 ng m^(-3);post-snowfall:1080.57±57.76 ng m^(-3)) and emission rates(pre-snowfall:52.86±4.71 ng m^(-3) h^(-1);post-snowfall:360.19±19.25 ng m^(-3) h^(-1)),reflecting a 6.8-fold surge.This study underscores the profound influence of light intensity,seasonal shifts,and climatic conditions on airborne phytoncide levels,offering a scientific foundation for optimizing forest therapy and ecotourism strategies.
基金supported in part by National Key R&D Program of China(2022YFB4501200),National Natural Science Foundation of China(62332018)Science and Technology Program(2024NSFTD0031,2024YFHZ0339 and 2025ZNSFSC0497).
文摘The performance of data restore is one of the key indicators of user experience for backup storage systems.Compared to the traditional offline restore process,online restore reduces downtime during backup restoration,allowing users to operate on already restored files while other files are still being restored.This approach improves availability during restoration tasks but suffers from a critical limitation:inconsistencies between the access sequence and the restore sequence.In many cases,the file a user needs to access at a given moment may not yet be restored,resulting in significant delays and poor user experience.To this end,we present Histore,which builds on the user’s historical access sequence to schedule the restore sequence,in order to reduce users’access delayed time.Histore includes three restore approaches:(i)the frequency-based approach,which restores files based on historical file access frequencies and prioritizes ensuring the availability of frequently accessed files;(ii)the graph-based approach,which preferentially restores the frequently accessed files as well as their correlated files based on historical access patterns,and(iii)the trie-based approach,which restores particular files based on both users’real-time and historical access patterns to deduce and restore the files to be accessed in the near future.We implement a prototype of Histore and evaluate its performance from multiple perspectives.Trace-driven experiments on two datasets show that Histore significantly reduces users’delay time by 4-700×with only 1.0%-14.5%additional performance overhead.
基金the Chinese Academy of Sciences Research Center for Ecology and Environment of Central Asia(RCEECA),the construction and joint research for the China-Tajikistan“Belt and Road”Joint Laboratory on Biodiversity Conservation and Sustainable Use(2024YFE0214200)the Shanghai Cooperation Organization Partnership and International Technology Cooperation Plan of Science and Technology Projects(2023E01018,2025E01056)the Chinese Academy of Sciences President’s International Fellowship Initiative(PIFI)(2024VBC0006).
文摘Tajikistan represents a core region of the biodiversity hotspot in Central Asian mountains and has exceptional vascular plant diversity.However,the species diversity of the country faces urgent conservation challenges.There has been a lack of a comprehensive and multidimensional assessment to inform strategic conservation planning.Therefore,this study integrated 4 key biodiversity indices including species richness(SR),phylogenetic diversity(PD),threatened species richness(TSR),and endemic species richness(ESR)to map species diversity distribution patterns,identify conservation gaps,and elucidate their effects of climatic factors.This study revealed that species diversity shows a clear trend of decreasing from the western region to the eastern region of Tajikistan.The central–western mountains(specifically the Gissar-Darvasian and Zeravshanian regions)emerge as irreplaceable biodiversity hotspots.However,we found a severe spatial mismatch between these priority areas and the existing protected areas(PAs).Protection coverage for all hotspots was alarmingly low,ranging from 31.00%to 38.00%.Consequently,a critical 64.80%of integrated priority areas fall outside of the current PAs,representing a major conservation gap.This study identified precipitation seasonality and isothermality as the principal drivers,collectively explaining over 50.00%of the diversity variation and suggesting high vulnerability to hydrological shifts.Furthermore,we detected significant geographic sampling bias in the public biodiversity databases,with the most critical hotspot being systematically under-sampled.This study provides a robust scientific basis for conservation action,highlighting the urgent need to strategically expand PAs in the under-protected southwestern region and to mitigate critical sampling gaps through targeted data digitization and field surveys.These measures are indispensable for securing Tajikistan’s unique biodiversity and achieving the Kunming-Montreal Global Biodiversity Framework Target 3(“30×30 Protection”).
基金Project supported by the National Natural Science Foundation of China(Nos.12102321 and 52192633)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2025JCYBMS-050)。
文摘A design idea for single-component metamaterial plates is proposed to achieve the thermal stability of flexural wave bandgap by the perforated and pre-curved patterns.The band structure analysis suggests that perforation can release part of the in-plane thermal expansion to weaken the softening effect of thermal stress.Introducing precurved components to the perforated structure will stop the decrement of the bandgap frequency in thermal environment,and even make the frequency higher with appropriate structural parameters.The bending stiffness of the heated plate is enhanced by the thermal deflection induced stiffening effect of the pre-curved components.The segmented pre-curved component presents a strong ability to resist the thermal influence on the flexural wave bandgap.A simplified model is established for the local structure of the precurved component.The theoretical calculations explain the thermally induced frequency increment of the bandgap and the discrepancy in the thermal response between the two pre-curved models.The transmittance of flexural wave validates the effectiveness of the proposed design.
文摘BACKGROUND Drug utilization research has an important role in assisting the healthcare administration to know,compute,and refine the prescription whose principal objective is to enable the rational use of drugs.Research in developing nations relating to the cost of treatment is scarce when compared with developed countries.Thus,the drug utilization research studies from developing nations are most needed,and their number has been growing.AIM To evaluate patterns of utilization of antipsychotic drugs and direct medical cost analysis in patients newly diagnosed with schizophrenia.METHODS The present study was observational in type and based on a retrospective cohort to evaluate patterns of utilization of antipsychotic drugs using World Health Organization(WHO)core prescribing indicators and anatomical therapeutic chemical/defined daily dose indicators.We also calculated direct medical costs for a period of 6 months.RESULTS This study has found that atypical antipsychotics are the mainstay of treatment for schizophrenia in every age group and subcategories of schizophrenia.The evaluation based on WHO prescribing indicators showed a low average number of drugs per prescription and low prescribing frequency of antipsychotics from the National List of Essential Medicines 2015 and the WHO Essential Medicines List 2019.The total mean drug cost of our study was 1396 Indian rupees.The total mean cost due to the investigation in our study was 1017.34 Indian rupees.Therefore,the total mean direct medical cost incurred on patients in our study was 4337.28 Indian rupees.CONCLUSION The information from the present study can be used for reviewing and updating treatment policy at the institutional level.
基金supported by the National Key Research and Development Program of China(2024YFF1306305)the Inner Mongolia Autonomous Region Natural Science Foundation Project(2025QN03106)+1 种基金the Research Start-up Project for the Introduction of High-level and Outstanding Doctoral Talent at Inner Mongolia Agricultural University(NDYB2024-42)the National Natural Science Foundation of China(42201012).
文摘Global grassland degradation necessitates the identification of sustainable grazing management strategies.In semi-arid regions,grazing exclusion(GE),cold-season grazing(CG),and free grazing(FG)represent common practices in grassland ecosystems,yet the long-term ecological consequences of these patterns on plant community structure and soil aggregate stability remain inadequately elucidated.In this study,we evaluated the effects of GE,CG,and FG on soil organic carbon,soil water content,soil bulk density,soil aggregates,and vegetation indicators in Xilamuren steppe,a semi-arid grassland in northern China through field sampling and laboratory analyses in 2024.Our findings revealed that,compared to CG and FG,GE significantly enhanced aboveground and belowground biomass,species diversity,and soil physical-chemical properties in the 0–30 cm layer.The dominant plant species in GE and CG sites were Stipa krylovii,Leymus chinensis,and Agropyron cristatum,whereas Stipa krylovii,Artemisia frigida,and Leymus chinensis were predominant in FG site.Different grazing patterns led to distinct soil aggregate distributions,with>2.00 and<0.25 mm aggregates exhibiting the highest content in different soil layers depending on the grazing patterns.All grazing management strategies significantly improved soil aggregate stability,with the overall stability following the order:GE>CG>FG.Furthermore,random forest modeling identified plant species diversity,plant growth traits,and grazing patterns as the primary determinants of soil aggregate stability.Collectively,these results offer valuable insights into the sustainable management and ecological restoration of semi-arid grasslands under different grazing pressures.
基金supported by the Czech Science Foundation (23-06160S)by the Faculty of Medicine of Masaryk University (MUNI/A/1738/2024)。
文摘Enamel,the inorganic tissue covering the crowns of teeth,is known for its remarkable resilience and hardness.These properties originate from its high proportion of mineralized matrix and complex internal microarchitecture.On an ultrastructural level,it consists of directionally arranged enamel prisms.Continuously growing rodent incisors are an exemplary case of this phenomenon.Their enamel has a consistent decussation pattern,providing teeth with extremely high resistance and ensuring they remain constantly sharp.While the decussation pattern has been described in detail,mechanisms behind its formation have not been experimentally proven.Here,we show that the highly organized enamel micropattern is generated by directional epithelial sliding of enamel-forming ameloblasts in vivo.Our results detail how enamel micropatterning stems from individual cell cluster segregation and subsequent reciprocal interweaving.Based on this determination,we introduce and experimentally demonstrate a new model of enamel decussation pattern formation.
基金funded by geological survey project of China Geological Survey(DD20211404)。
文摘Mineral resources in Asia continent and its mining industry play a significant role in the economic growth and industrialization of both Asia and the world.Asia continent boasts the most comprehensive kinds of minerals,with reserves of at least 38 of over 80 widely used minerals worldwide accounting for more than30%of the global total reserves.Asia continent experienced three main tectonic evolution and mineralization stages:The Precambrian,the Paleozoic,and the Mesozoic to Cenozoic.The abundant mineral resources in this continent can be divided into seven first-order metallogenic belts(metallogenic domains),18 second-order metallogenic belts(metallogenic provinces),61 third-order metallogenic belts(metallogenic zones),and nine main minerogenetic series.Asia continent exhibits the most significant metallogenic specialization among all continents.Specifically,granite belts of Asia continent manifest pronounced metallogenic specialization of tin,rare metals,and porphyry Cu-Au-Mo deposits.Its maficultramafic rock belts and ophiolite belts display notable metallogenic specialization of lateritic nickel deposits and magmatic type chromite deposits,while its Mesozoic to Cenozoic basalt belts show remarkable metallogenic specialization of lateritic bauxite deposits.Consequently,many giant metallogenic belts were formed,including the Southeast Asian tin belt,the Qinghai-Xizang Plateau rare metal metallogenic belt,the Tethyan porphyry Cu-Au-Mo metallogenic belt,the circum-Pacific porphyry Cu-Au-Mo metallogenic belt,the Southeast Asian lateritic bauxite metallogenic belt,the Deccan Plateau lateritic bauxite metallogenic belt in India,the Southeast Asian lateritic nickel metallogenic belt,and the Tethyan magmatic type chromite metallogenic belt—all of which are significant metallogenic belts in Asia continent.Future mineral exploration in Asia should focus primarily on the Precambrian mineralization of ancient cratons,the Paleozoic mineralization of the Central Asian-Mongolian orogenic belt,and the Mesozoic to Cenozoic mineralization of the Tethyan and circum-Pacific mobile belts.Asia's mining industry not only underpins its own economic growth but also propels global economic development and industrialization,contributing significantly to the world economy.Asia boasts the highest production value of minerals,the largest annual production of minerals,and the greatest trade value of mineral products among all the continents,having emerged as the trade center of global mineral products and the center of the mining industry economy.China is identified as one of the few countries that possess the most comprehensive kinds of minerals,and its mining industry has supported and driven the economic development and industrialization of Asia and even the world.Standing as the largest mineral producer worldwide,China ranked first in the production of 28 mineral commodities in the world in 2022.Besides,China exhibits the highest annual production value of minerals and the largest trade value of mineral products among all countries.Therefore,China's demand for global mineral products influences the global supply and demand patterns of minerals and the world economic situation.
基金financially supported by the NationalNatural Science Foundation of China (No. 51574023)the National Key Research and Development Program ofChina (No. 2016YFB0600701)
文摘HyperCoal was prepared from low-rank coal via high-temperature solvent extraction with N-methylpyrrolidone as an extraction solvent and a liquid-to-solid ratio of 50 mL/g in a high-temperature and high-pressure reactor. When HyperCoal was used as a binder and pulverized coal was used as the raw material, the compressive strength of the hot-pressed briquettes(each with a diameter of 20 mm and mass of 5 g) under different conditions was studied using a hot-pressing mold and a high-temperature furnace. The compressive strength of the hot-pressed briquettes was substantially improved and reached 436 N when the holding time period was 15 min, the hot-pressing temperature was 673 K, and the HyperCoal content, was 15 wt%. Changes in the carbonaceous structure, as reflected by the intensity ratio between the Raman G-and D-bands(IG/ID), strongly affected the compressive strength of hot-pressed briquettes prepared at different hot-pressing temperatures. Compared with cold-pressed briquettes, hot-pressed briquettes have many advantages, including high compressive strength, low ash content, high moisture resistance, and good thermal stability; thus, we expect that hot-pressed briquettes will have broad application prospects.
基金financially supported by the National Natural Science Foundation of China(Nos.51973150 and 21674076)the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(No.19KJA320009)a Project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Piezoelectric poly(vinylidene fluoride)(PVDF)has received considerable attention due to its ability of interconverting mechanical into electric energies and potential applications in wearable electronics.To achieve piezoelectricity,it is important to simultaneously control the formation of polar phases,crystallinity,and dipole alignments in PVDF-based films.Here we demonstrate that piezoelectricity can be obtained by directly hot-pressing PVDF films sandwiched between chitosan or cellulose films.The electrostatic interactions between PVDF and chitosan or cellulose enabled an exceptional high content of polar phases(β-andγ-phases)up to 90%and a measured piezoelectric charge coefficient d_(33)of up to-30 pC/N.This study provides a simple and low-cost approach for obtaining piezoelectric PVDF films used for sensors,actuators,and energy harvesters.
基金financial support of National Key Research and Development Program of China (No. 2017YFA0403803)the National Natural Science Foundation of China (Nos.51525401, 51774065, 51601028, 51690163)+1 种基金Dalian Support Plan for Innovation of High-level Talents (Top and Leading Talents, 2015R013)fundamental research funds for the central universities (Nos. DUT18RC(3)042, DUT17RC(3)108)
文摘B4Cp/6061Al composites have become important structural and functional materials and can be fabricated by powder metallurgy and subsequent hot rolling. In this work, the effects of the hot-pressing temperature on microstructures and mechanical behaviors of the B4Cp/6061Al composites were investigated. The results showed that compared with the T4 heat treated B4Cp/6061Al composite hot pressed at 560℃, the yield strength and failure strain of the composites hot pressed at 580℃ were increased to 235 MPa and 18.4%, respectively. This was associated with the interface bonding strength between the B4C particles and the matrix. However, the reaction products, identified to be MgAl2O4 phases, were detected in the composites hot pressed at 600℃. The formation of the MgAl2O4 phases resulted in the Mg depletion, thus reducing the yield strength to 203.5 MPa after the T4 heat treatment due to the effect of the solid solution strengthening being weakened. In addition, the variation of hardness and electrical conductivity was mainly related to the Mg content in the matrix. Based on the as-rolled microstructures observed by SEM, SR-μCT and fracture surfaces, the deformation schematic diagram was depicted to reflect the tensile deformation process of the composites.
基金supported by the National Key R&D Program of China (Grant No.2020YFA0710500)The authors acknowledge the basic scientific research business expenses Program of Xi’an Jiaotong University (Grant No.xzy022022053)the Independent Research Project of the State Key Laboratory of Electrical Insulation and Power Equipment (Grant No.EIPE23303)for financial support.
文摘Safety issues induced by infinite anode volume change and uncontrolled lithium(Li)dendrite growth have become the biggest obstacle to the practical application of Li metal batteries.In addition,the tra-ditional rolling method makes it difficult to manufacture thin Li foil with high mechanical strength and low Li content.Herein,a three-dimensional(3D)lithophilic carbon paper/copper(Cu)current collector hybrid anode with ultra-low Li metal content is prepared by a hot-pressing method.The highly re-versible and stable lithiophilic layer LiC_(x) formed in situ by heating/pressing treatment provides abun-dant nucleation sites and reduces the Li nucleation overpotential,thereby effectively suppressing Li den-drite growth.Moreover,the volume change and pulverization problems of Li metal anode during depo-sition/stripping also can be accommodated by the 3D skeleton.The optimization effect has been directly confirmed by in-situ optical and ex-situ scanning electron microscope observation.Therefore,highly sta-ble performance(158.4 mA h g^(-1) at 2 C after 200 cycles with a capacity retention of 95.24%)in Li@LCP-Cu||NCM811 coin cell can be achieved.Furthermore,the solid-state battery assembled with the hybrid anode,poly(vinylidene fluoride)(PVDF)-based polymer electrolyte and polyethylene oxide(PEO)interface functional layer also exhibits the best electrochemical and safety performance,which also proves that the Li@LCP-Cu anode has great potential for application in solid-state batteries.
基金supported by the National Natural Science Foundation of China(No.50105011)
文摘A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/ Ni/Mo (hereafter called AI2O3/TiC composite) composite compacts decreases by 6% after adopting this new technique, compared to traditional hot-pressing technique under the same sintering temperature. The flexural strength and Vicker hardness increase from 883 MPa to 980 MPa and from 16 GPa to 21.1 GPa, respectively. A theoretical model was given to analyze the densification mechanism of the composite in the process of repetitious-hot-pressing.
基金Project supported by the Major Project of“Science and Technology Innovation 2025”in Ningbo City,China(Grant Nos.2018B10086 and 2018B10017).
文摘The Nd-Fe-B magnets are pre-sintered and then processed with hot-pressing,and the resulting magnets are called the hot-pressed pretreated(HPP)magnets.The coercivity of the HPP magnets increases as the annealed temperature increases.When the annealing temperature is 900℃,the coercivity of the magnet is only 17.6 kOe(1 Oe=79.5775 A·m^-1),but when the annealing temperature rises up to 1060℃,the coercivity of the magnet reaches 23.53 kOe,which is remarkably increased by 33.7%.The microstructure analysis indicates that the grain surface of the HPP magnet becomes smoother as the annealed temperature increases.The microstructure factorαis changed according to the intrinsic coercivity model formula.Theαof the magnet at 900℃is only 0.578,but it is 0.825 at 1060℃.Microstructural optimization is due mainly to the increase of coercivity of the HPP magnet.
基金the National Natural Science Foundation of China under grant No. 50371081.
文摘Densification behavior of nanocrystalline Mg2Si （n-Mg2Si） with grain size about 30-50 nm was investigated by hot-pressing at 400℃. The results indicated that the densification process of n-Mg2Si exhibited three linear segments： p〈0.3 GPa, 0.3 GPa〈p〈1.2 GPa, and p〉1.2 GPa determined by Heckel formula, among which the third fast increasing segment in high pressure range p〉1.2 GPa has seldom been reported in conventional coarse-grained polycrystalline materials. Nevertheless, in the whole pressure range （0.125-1.500 GPa） investigated the densification behavior of n-Mg2Si can be well described by a Kawakita formula p/C=（1/a）p＋ 1/（ab） with constant α=0.452 being in good agreement with the initial porosity of the compact.
基金Item Sponsored by National Natural Science Foundation of China(50904022)Education Department of Hebei Province Outstanding Youth Fund Project of China(Y2011116)
文摘BN-MgA1ON composites were prepared by hot-pressing sintering under nitrogen atmosphere with BN-Mg- A1ON composite powders as raw material and Y2 O3 as sintering additive. Based on thermodynamic analysis, the oxi- dation resistance of BN-MgAION composites was investigated and the dynamics of oxidation process was also ana- lyzed. The oxidation process and the micro-morphology of the samples before and after oxidation were characterized by X-ray diffraction and scanning electron microscopy. The dynamics of oxidation resistance of the BN-MgA1ON composites was investigated via the analysis of the constant temperature oxidation mass gain curves. The results show that the main components of the material are MgA1ON, Sialon, BN and CaYAI3 07 at 1 650--1750 ＊C, and the content of CaYA1307 decreases as the sintering temperature increases. The BN-MgA1ON composites prepared at 1750 ℃ is uniform and compact with the balanced distributions of A1, Mg, O, and N. The oxidation process of BN- MgA1ON composites in air mainly consists of MgAION, Sialon and BN oxidation. The section after being oxidized at 1000--1300 ℃ involves three layers, namely, the outer layer, the middle layer and the inner layer. The oxidation process follows the parabola model. The apparent activation energy of the oxidation process is 2.13 × 10 5 J/mol and the frequency factor is 4.66 × 10 6.
基金supported by the National Natural Science Foundation of China(62374142,12175189 and 11904302)External Cooperation Program of Fujian(2022I0004)+1 种基金Fundamental Research Funds for the Central Universities(20720190005 and 20720220085)Major Science and Technology Project of Xiamen in China(3502Z20191015).
文摘The preparation of red,green,and blue quantum dot(QD)pixelated arrays with high precision,resolution,and brightness poses a significant challenge on the development of advanced micro-displays for virtual,augmented,and mixed reality applications.Alongside the controlled synthesis of high-performance QDs,a reliable QD patterning technology is crucial in overcoming this challenge.Among the various methods available,photolithography-based patterning technologies show great potentials in producing ultra-fine QD patterns at micron scale.This review article presents the recent advancements in the field of QD patterning using photolithography techniques and explores their applications in micro-display technology.Firstly,we discuss QD patterning through photolithography techniques employing photoresist(PR),which falls into two categories:PRassisted photolithography and photolithography of QDPR.Subsequently,direct photolithography techniques based on photo-induced crosslinking of photosensitive groups and photo-induced ligand cleavage mechanisms are thoroughly reviewed.Meanwhile,we assess the performance of QD arrays fabricated using these photolithography techniques and their integration into QD light emitting diode display devices as well as color conversionbased micro light emitting diode display devices.Lastly,we summarize the most recent developments in this field and outline future prospects.
基金supported by the Guangdong Basic and Applied Basic Research project (No.2020B0301030004)the Key-Area Research and Development Program of Guangdong Province (No.2020B1111360003)+1 种基金the National Natural Science Foundation of China (No.42105103)the Guangdong Basic and Applied Basic Research Foundation (No.2022A1515011554).
文摘Objective weather classification methods have been extensively applied to identify dominant ozone-favorable synoptic weather patterns(SWPs),however,the consistency of different classification methods is rarely examined.In this study,we apply two widely-used objective methods,the self-organizing map(SOM)and K-means clustering analysis,to derive ozone-favorable SWPs at four Chinese megacities in 2015-2022.We find that the two algorithms are largely consistent in recognizing dominant ozone-favorable SWPs for four Chinese megacities.In the case of classifying six SWPs,the derived circulation fields are highly similar with a spatial correlation of 0.99 between the two methods,and the difference in themean frequency of each SWP is less than 7%.The six dominant ozone-favorable SWPs in Guangzhou are all characterized by anomaly higher radiation and temperature,lower cloud cover,relative humidity,and wind speed,and stronger subsidence compared to climatology mean.We find that during 2015-2022,the occurrence of ozone-favorable SWPs days increases significantly at a rate of 3.2 days/year,faster than the increases in the ozone exceedance days(3.0 days/year).The interannual variability between the occurrence of ozone-favorable SWPs and ozone exceedance days are generally consistent with a temporal correlation coefficient of 0.6.In particular,the significant increase in ozone-favorable SWPs in 2022,especially the Subtropical High type which typically occurs in September,is consistent with a long-lasting ozone pollution episode in Guangzhou during September 2022.Our results thus reveal that enhanced frequency of ozone-favorable SWPs plays an important role in the observed 2015-2022 ozone increase in Guangzhou.
