This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and...This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.展开更多
This paper proposes a passive control method to reduce peak values of slipstream and turbulent kinetic energy in a high-speed train wake by attaching vortex generators(VGs)onto the upper surface of the tail car.The im...This paper proposes a passive control method to reduce peak values of slipstream and turbulent kinetic energy in a high-speed train wake by attaching vortex generators(VGs)onto the upper surface of the tail car.The impact of the VGs is assessed through the improved delayed detached eddy simulations(IDDES)after validating predictions against previous experimental measurements and other numerical predictions for the base case.The simulations indicate that strategically installed VGs can reduce the average slipstream velocity(U slipstream)and the upper limit of slipstream velocity(U_(slipstream,max))by~17%and~15%,respectively,as well as moving the peaks downstream by approximately train height,thus reducing the danger posed by slipstream to waiting passengers and trackside workers.Analysis shows that the wake turbulent kinetic energy diminishes as the vortex generators decelerate the downwash flow and reduce shear production in the wake.It is also found that the presence of VGs significantly impacts the flow on the upper surface near the tail by modifying the unsteady trailing longitudinal vortices through the formation of additional counter-rotating longitudinal vortices from the VGs.These latter vortices prevent the merging of vortical airflow around the trailing nose tip,which is otherwise induced by the longitudinal vortex of the train.They also reduce vortex intensity through cross-annihilation and cross diffusion as the wake advects downstream,limiting outwards advection through interaction with the image pair,and contributing to a decrease in the peak slipstream value.The method proposed offers a simple approach to wake control leading to significant slipstream benefits.展开更多
The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle b...The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle box bearing failures.Therefore,it is extremely important to study the mechanism of axle box bearings.Firstly,the medium of thermal deformation establishes a coupling relationship between the system dynamics model and the thermal grid model,and then obtains the thermal force coupling model of the high-speed train axle box bearing.The coupling model is validated from the perspectives of system dynamics response and temperature response,proving its effectiveness in system dynamics response and temperature characteristic response.Comparing the coupling model with the dynamics model,it is found that thermal deformation complicates the dynamic re-sponse.Finally,using the Lundberg-Palmgren(L-P)bearing fatigue calculation method and damage accumu-lation theory,the bearing fatigue life is calculated,and it is found that thermal deformation deteriorates the bearing operating environment,reducing the bearing fatigue life.Finally,by comparing the bearing fatigue life under different working conditions,it is concluded that the faster the vehicle speed,the greater the load,and the smaller the initial radial clearance of the bearing,the fatigue life of the bearing is reduced.The shorter the lifespan.展开更多
Research on high-speed railways is a relatively new yet highly significant field in Vietnam.Among its key components,train control signaling plays a critical role,as it directly affects various interconnected systems,...Research on high-speed railways is a relatively new yet highly significant field in Vietnam.Among its key components,train control signaling plays a critical role,as it directly affects various interconnected systems,including infrastructure,traction power supply,operational planning,and overall railway safety.This article focuses on evaluating the capacity of the line based on the types of signals suitable for high-speed railways that have been effectively implemented in several European countries and successfully adapted in China.The research and simulation are conducted using MATLAB software,a reliable and widely adopted tool in the scientific community.The findings demonstrate that under normal conditions,the European Railway Traffic Management System/European Train Control System(ERTMS/ETCS)Level 2 signaling can support up to 23.7485 trains/hour/direction.Meanwhile,ERTMS/ETCS Level 3 with full moving block can accommodate up to 30.8735 trains/hour/direction,and ERTMS/ETCS Level 3 with fixed virtual blocks up to 29.4694 trains/hour/direction.In emergency scenarios,ERTMS/ETCS Level 3 with full moving block reduces headway by 33.27%compared to CTCS Level 3,while ERTMS/ETCS Level 3 with fixed virtual blocks achieves a 28.78%reduction.Overall,the ERTMS/ETCS Level 3 emerges as a state-of-the-art signaling technology offering high capacity and operational efficiency,and is recommended as a forward-looking solution for future implementation in Vietnam.展开更多
As China's high-speed railway technology advances,high-speed trains have emerged as a pivotal mode of transportation,instrumental in facilitating passenger and freight mobility while fostering robust regional eco-...As China's high-speed railway technology advances,high-speed trains have emerged as a pivotal mode of transportation,instrumental in facilitating passenger and freight mobility while fostering robust regional eco-nomic and trade interactions.Nonetheless,the safety of train operations remains a paramount concern,prompting extensive research into the dynamic behavior of critical components,which is essential to ensuring seamless and secure transportation services.This article commences by comprehensively reviewing the current landscape and evolutionary trajectory of dynamic model analysis for both traditional bearings and axle box bearings.Emphasis is placed on elucidating the profound influence of diverse bearing fault types on the system's kinematic state,alongside delving into the research methodologies employed in developing multi-physics field coupling models.Subsequently,it expounds on the content of investigations focusing on various wheel and track impairments,grounded in the dynamic modeling of the bearing vehicle coupling system.Concurrently,the intricate interplay between wheel-rail excitation and axle box bearing faults on the system's performance is elucidated.Concludingly,the article underscores the inadequacy of current multi-source fault diagnosis meth-odologies in tackling the intricacies of complex train operating environments,thereby highlighting its sig-nificance as a pressing and vital research agenda for the future.展开更多
The spatial offset of bridge has a significant impact on the safety,comfort,and durability of high-speed railway(HSR)operations,so it is crucial to rapidly and effectively detect the spatial offset of operational HSR ...The spatial offset of bridge has a significant impact on the safety,comfort,and durability of high-speed railway(HSR)operations,so it is crucial to rapidly and effectively detect the spatial offset of operational HSR bridges.Drive-by monitoring of bridge uneven settlement demonstrates significant potential due to its practicality,cost-effectiveness,and efficiency.However,existing drive-by methods for detecting bridge offset have limitations such as reliance on a single data source,low detection accuracy,and the inability to identify lateral deformations of bridges.This paper proposes a novel drive-by inspection method for spatial offset of HSR bridge based on multi-source data fusion of comprehensive inspection train.Firstly,dung beetle optimizer-variational mode decomposition was employed to achieve adaptive decomposition of non-stationary dynamic signals,and explore the hidden temporal relationships in the data.Subsequently,a long short-term memory neural network was developed to achieve feature fusion of multi-source signal and accurate prediction of spatial settlement of HSR bridge.A dataset of track irregularities and CRH380A high-speed train responses was generated using a 3D train-track-bridge interaction model,and the accuracy and effectiveness of the proposed hybrid deep learning model were numerically validated.Finally,the reliability of the proposed drive-by inspection method was further validated by analyzing the actual measurement data obtained from comprehensive inspection train.The research findings indicate that the proposed approach enables rapid and accurate detection of spatial offset in HSR bridge,ensuring the long-term operational safety of HSR bridges.展开更多
Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may com...Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may compromise their fatigue capacity.The most common structural design for railway noise barriers consists of vertical configurations of posts and panels.However,there have been few dynamic analyses of steel post/wood panel noise barriers under train-induced aerodynamic loads.This study used dynamic finite element analysis to assess the dynamic behavior of such noise barriers.Analysis of a 40-m-long noise barrier model and a triangular simplified load model,the latter of which effectively represented the detailed aerodynamic load,were first used to establish the model and input of the moving load during dynamic simulation.Then,the effects of different parameters on the dynamic response of the noise barrier were evaluated,including the damping ratio,the profile of the steel post,the span length of the panel,the barrier height,and the train speed.Gray relational analysis indicated that barrier height exhibited the highest correlations with the dynamic responses,followed by train speed,post profile,span length,and damping ratio.A reduction in the natural frequency and an increase in the train speed result in a higher peak response and more pronounced fluctuations between the nose and tail waves.The dynamic amplification factor(DAF)was found to be related to both the natural frequency and train speed.A model was proposed showing that the DAF significantly increases as the square of the natural frequency decreases and the cube of the train speed rises.展开更多
Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along ...Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along the Primorsky No.1 and No.2 transportation corridors.First,the evaluation of urban accessibility level with and without Primorsky No.1 and No.2 high-speed rails(HSRs)opening was conducted with two indicators,i.e.,the weighted average travel time,and the economic potential.After the evaluation,the spatial differentiation pattern of the accessibility changes with and without Primorsky No.1 and No.2 HSRs opening was performed respectively using ArcGIS.On these bases,the regional spatial effects brought by Primorsky No.1 and No.2 HSRs opening were studied.The results are as following.First,the urban accessibility level will be greatly improved by the opening of Primorsky No.1 and No.2 HSRs.All adjacent cities will be integrated into‘1 h HSR communication circle’and the whole journey will be integrated into‘4 h HSR communication circle’along Primorsky No.1 and No.2 corridors,respectively.The HSR accessibility of Primorsky No.1 corridor is stronger than that of Primorsky No.2 corridor.But the HSR accessibility improvement degree of Primorsky No.1 corridor is weaker than that of Primorsky No.2 corridor.Second,spatially,along Primorsky No.1 and No.2 corridors,the HSR accessibility level of the cities which are located in China is stronger than those cities located in Russia,showing the‘High West,Low East’patterns.The HSR accessibility improvement degree of the cities which are located in Russia and Sino-Russian border is stronger than those cities located in China,showing the‘High East,Low West’patterns.Third,Primorsky No.1 and No.2 corridors could connect the China’s‘Heilongjiang Land Sea Silk Road Economic Belt’and‘Changchun-Jilin-Tumen Development Pilot Zone’respectively,gradually involving into the development of China’s Harbin-Changchun Megalopolis.Relying on Harbin(China)and Changchun(China),Primorsky No.1 and No.2 HSRs could connect Northeast China-Beijing HSR,accelerating the diffusion of population,economy and other flows from China’s Beijing-Tianjin-Hebei Urban Agglomeration to Northeast China,and then to Russia’s Far East Federal District.Relying on Suifenhe(China)and Hunchun(China),Primorsky No.1 and No.2 HSRs could be conducive to the development of the second largest sea channels for Northeast China,creating the Northeast Asian Urban Belt,and new sea-rail intermodal pattern among China,Russia,Democratic People’s Republic of Korea,Japan and Republic of Korea.Relying on Vladivostok(Russia)and Zarubino(Russia),Primorsky No.1 and No.2 corridors could connect the‘Ice Silk Road’,building the‘Sino-Russian Northern Maritime Corridor’and‘Sino-Russian Arctic Blue Economic Areas’.展开更多
Current sway test platforms for marine nuclear equipment face challenges in meeting the GJB 150.23A requirements.This is primarily because of the performance limitations of conventional actuators under extreme marine ...Current sway test platforms for marine nuclear equipment face challenges in meeting the GJB 150.23A requirements.This is primarily because of the performance limitations of conventional actuators under extreme marine conditions.This study aimed to overcome these constraints using an innovative parallel mechanism design.We developed a novel 6-PUS parallel platform featuring six kinematic chains with hybrid series-parallel actuators.Each chain combines(1)force-speed adaptive transmission,(2)redundant motor-driven dual-screw actuation,and(3)passive load-balancing mechanisms.Comprehensive kinematic/dynamic modeling and experimental validation were conducted.Tests demonstrated the capability of the platform to achieve cyclic speeds of±45°/7 s and±30°/3 s while supporting 10-ton loads.Successful sway tests on nuclear components(reactor pressurizer and control rod drive mechanism)confirmed the operational reliability.This work presented three key innovations:(1)a new parallel-platform architecture that overcomes the limitations of conventional actuators;(2)integrated hybrid actuation with adaptive transmission;and(3)high-speed,heavy-load performance that meets stringent marine testing standards.This solution significantly advances nuclear equipment qualification testing technology.展开更多
The current method of estimating the fatigue life of railway structures is to calculating the equivalent stress amplitude based on the measured stress data. However, the random of the measured data is not considered. ...The current method of estimating the fatigue life of railway structures is to calculating the equivalent stress amplitude based on the measured stress data. However, the random of the measured data is not considered. In this paper, a new method was established to compute the equivalent stress amplitude to evaluate the fatigue damage based on the measurable randomness, since the equivalent stress is the key parameter for assessment of structure fatigue life and load derivation. The equivalent stress amplitude of a high-speed train welded bogie frame was found to obey normal distribution under uniform operation route that verified by on-track dynamic stress data, and the proposed model is, in effect, an improved version of the mathematical model used to calculate the equivalent stress amplitude. The data of a long-term, on-track dynamic stress test program was analyzed to find that the normal distribution parameters of equivalent stress amplitude values differ across different operation route. Thus, the fatigue damage of the high-speed train welded bogie frame can be evaluated by the proposed method if the running schedule of the train is known a priori. The results also showed that the equivalent stress amplitude of the region connected to the power system is more random than in other regions of the bogie frame.展开更多
Piled embankments,which offer many advantages,are increasingly popular in construction of high-speed railways in China.Although the performance of piled embankment under static loading is well-known,the behavior under...Piled embankments,which offer many advantages,are increasingly popular in construction of high-speed railways in China.Although the performance of piled embankment under static loading is well-known,the behavior under the dynamic train load of a high-speed railway is not yet understood.In light of this,a heavily instrumented piled embankment model was set up,and a model test was carried out,in which a servo-hydraulic actuator outputting M-shaped waves was adopted to simulate the process of a running train.Earth pressure,settlement,strain in the geogrid and pile and excess pore water pressure were measured.The results show that the soil arching height under the dynamic train load of a high-speed railway is shorter than under static loading.The growth trend for accumulated settlement slowed down after long-term vibration although there was still a tendency for it to increase.Accumulated geogrid strain has an increasing tendency after long-term vibration.The closer the embankment edge,the greater the geogrid strain over the subsoil.Strains in the pile were smaller under dynamic train loads,and their distribution was different from that under static loading.At the same elevation,excess pore water pressure under the track slab was greater than that under the embankment shoulder.展开更多
To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at differen...To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at different cross-sections of the pile-board structure for high-speed railway. The dynamic deformation, permanent deformation and dynamic stress of main reinforcements were measured. The test results show that the dynamic responses of the pile-board structure almost did not vary with the forced vibration times under the simulated trainload. After one million times of forced vibration, the permanent deformations of the midspan section of intermediate span and midspan section of side span were 0.7 mm and 0. 6 mm, respectively, and there was no accumulative plastic deformation at the bearing section of intermediate span.展开更多
A series of tests have been conducted using a Cryogenic Wind Tunnel to study the effect of Reynolds number(Re)on the aerodynamic force and surface pressure experienced by a high speed train.The test Reynolds number ha...A series of tests have been conducted using a Cryogenic Wind Tunnel to study the effect of Reynolds number(Re)on the aerodynamic force and surface pressure experienced by a high speed train.The test Reynolds number has been varied from 1 million to 10 million,which is the highest Reynolds number a wind tunnel has ever achieved for a train test.According to our results,the drag coefficient of the leading car decreases with higher Reynolds number for yaw angles up to 30º.The drag force coefficient drops about 0.06 when Re is raised from 1 million to 10 million.The side force is caused by the high pressure at the windward side and the low pressure generated by the vortex at the lee side.Both pressure distributions are not appreciably affected by Reynolds number changes at yaw angles up to 30°.The lift force coefficient increases with higher Re,though the change is small.At a yaw angle of zero the down force coefficient is reduced by a scale factor of about 0.03 when the Reynolds number is raised over the considered range.At higher yaw angles the lift force coefficient is reduced about 0.1.Similar to the side force coefficient,the rolling moment coefficient does not change much with Re.The magnitude of the pitching moment coefficient increases with higher Re.This indicates that the load on the front bogie is higher at higher Reynolds numbers.The yawing moment coefficient increases with Re.This effect is more evident at higher yaw angles.The yawing moment coefficient increases by about 6%when Re is raised from 1 million to 10 million.The influence of Re on the rolling moment coefficient around the leeward rail is relatively smaller.It increases by about 2%over the considered range of Re.展开更多
China’s high-speed railways are always facing the potential damage risk induced by strong earthquakes.And the route design concept of“using bridge instead of embankment”has also greatly increased the probability of...China’s high-speed railways are always facing the potential damage risk induced by strong earthquakes.And the route design concept of“using bridge instead of embankment”has also greatly increased the probability of high speed trains moving on bridges when a strong earthquake happens.In the past decades,a bunch of theoretical and numerical studies have been conducted in the seismic dynamic field of high-speed railway.However,the effective dynamic test system for verifying the given method and theoretical results is still lacking.Therefore,a novel dynamic test system(DTS)consisting of a shaking table array and a train-pass-bridge reduced-scale model is proposed in this paper.Through some crucial technical problems discussion,the effectiveness of similar design scheme and the feasibility of reduced-scale DTS are elaborated,and then the detailed DTS structures are given and displayed as part-by-part.On this basis,the demonstration tests are conducted and compared with the numerical simulation.The results show that the proposed DTS is accurate and effective.Therefore,the DTS can provide a new physical simulation approach to study the high-speed train’s running safety on bridges under earthquakes and can also provide a reference for the construction of related systems.展开更多
A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a n...A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.展开更多
According to the valve port features of high speed on-off valve and its actions,the valve port can be simplified into an a-type half bridge construction.A method that tests the dynamic characteristics of the high spee...According to the valve port features of high speed on-off valve and its actions,the valve port can be simplified into an a-type half bridge construction.A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed.Having analyzed the factors related to the dynamic characteristics of an a-type half bridge,a rule for designing the outlet chamber's volume is worked out.According to the rule,a test stand is built to test the self-developed high-speed on-off valve.From the test results,it can be seen that with the outlet chamber's volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little.The test results conform to the simulation results,which nroves the correctness of the method.展开更多
For the purpose of establishing and validating aerodynamic performance predictions at transonic Mach numbers, a wind tunnel test was conducted in the High-Speed Tunnel（HST） of the German-Dutch Wind Tunnels. The test...For the purpose of establishing and validating aerodynamic performance predictions at transonic Mach numbers, a wind tunnel test was conducted in the High-Speed Tunnel（HST） of the German-Dutch Wind Tunnels. The test article is the aerodynamic validation model from the Chinese Aeronautical Establishment, which is a full-span scale model representation of a business jet aircraft. The wind tunnel test comprised of parallel deployments of balance, pressures, infrared thermography, and model marker measurement techniques. Dedicated investigations with a dummy support were conducted as well, in order to derive and correct for the interference that the support system imposed on the overall model loads. This enabled the establishment of a comprehensive dataset in which the steady overall model loads, the wing load distribution, the state of the wing boundary layer, and the aeroelastic wing shape were quantified for conditions up to and beyond the cruise Mach number of 0.85.展开更多
Purpose-This paper aims to analyze the stress and strain distribution on the track wheel web surface and study the optimal strain gauge location for force measurement system of the track wheel.Design/methodology/appro...Purpose-This paper aims to analyze the stress and strain distribution on the track wheel web surface and study the optimal strain gauge location for force measurement system of the track wheel.Design/methodology/approach-Finite element method was employed to analyze the stress and strain distribution on the track wheel web surface under varying wheel-rail forces.Locations with minimal coupling interference between vertical and lateral forces were identified as suitable for strain gauge installation.Findings-The results show that due to the track wheel web’s unique curved shape and wheel-rail force loading mechanism,both tensile and compressive states exit on the surface of the web.When vertical force is applied,Mises stress and strain are relatively high near the inner radius of 710 mm and the outer radius of 1110mmof the web.Under lateral force,high Mises stress and strain are observed near the radius of 670mmon the inner and outer sides of the web.As the wheel-rail force application point shifts laterally toward the outer side,the Mises stress and strain near the inner radius of 710 mm of the web gradually decrease under vertical force while gradually increasing near the outer radius of 1110 mm of the web.Under lateral force,the Mises stress and strain on the surface of the web remain relatively unchanged regardless of the wheel-rail force application point.Based on the analysis of stress and strain on the surface of the web under different wheel-rail forces,the inner radius of 870 mm is recommended as the optimal mounting location of strain gauges for measuring vertical force,while the inner radius of 1143 mm is suitable for measuring lateral force.Originality/value-The research findings provide valuable insights for determining optimal strain gauge locations and designing an effective track wheel force measurement system.展开更多
Motivated by the huge practical engineering demand for the fundamental understanding of mechanical characteristics of high-speed railway infrastructure,a fullscale multi-functional test platform for high-speed railway...Motivated by the huge practical engineering demand for the fundamental understanding of mechanical characteristics of high-speed railway infrastructure,a fullscale multi-functional test platform for high-speed railway track–subgrade system is developed in this paper,and its main functions for investigating the mechanical performance of track–subgrade systems are elaborated with three typical experimental examples.Comprising the full-scale subgrade structure and all the five types of track structures adopted in Chinese high-speed railways,namely the CRTS I,the CRTS II and the CRTS III ballastless tracks,the double-block ballastless track and the ballasted track,the test platform is established strictly according to the construction standard of Chinese high-speed railways.Three kinds of effective loading methods are employed,including the real bogie loading,multi-point loading and the impact loading.Various types of sensors are adopted in different components of the five types of track–subgrade systems to measure the displacement,acceleration,pressure,structural strain and deformation,etc.Utilizing this test platform,both dynamic characteristics and long-term performance evolution of high-speed railway track–subgrade systems can be investigated,being able to satisfy the actual demand for large-scale operation of Chinese high-speed railways.As examples,three typical experimental studies are presented to elucidate the comprehensive functionalities of the full-scale multi-functional test platform for exploring the dynamic performance and its long-term evolution of ballastless track systems and for studying the long-term accumulative settlement of the ballasted track–subgrade system in high-speed railways.Some interesting phenomena and meaningful results are captured by the developed test platform,which provide a useful guidance for the scientific operation and maintenance of high-speed railway infrastructure.展开更多
This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely re...This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely recognized AZ31 alloy in industry.Unlike the AZ31 alloy,which retains partially unrecrystallized grains,the high-speed-extruded BA56 alloy demonstrates a coarser but entirely recrystallized and more homogeneous microstructure.The fine-grained structure and abundant Mg_(3)Bi_(2) particles in the BA56 extrusion billet significantly enhance its DRX behavior,thus enabling rapid and complete recrystallization during extrusion.The BA56 alloy contains band-like fragmented Mg_(3)Bi_(2) particles and numerous fine Mg_(3)Bi_(2) particles distributed throughout the material,in contrast to the sparse Al_(8)Mn_(5) particles in the AZ31 alloy.These features contribute to superior mechanical properties of the BA56 alloy,which achieves tensile yield and ultimate tensile strengths of 205 and 292 MPa,respectively,compared to 196 and 270 MPa for the AZ31 alloy.The superior strength of the BA56 alloy,even with its coarser grain size,can be explained by its elevated Hall-Petch constant and the strengthening contribution from the fine Mg_(3)Bi_(2) particles.Additionally,the BA56 alloy demonstrates significant age-hardenability,achieving a 22%enhancement in hardness following T5 aging,attributed to the precipitation of nanoscale Mg_(3)Bi_(2) and Mg_(17)Al_(12) phases.By contrast,the AZ31 alloy shows minimal hardening due to the absence of precipitate formation during aging.These findings suggest that the BA56 alloy is a promising candidate for the production of extruded Mg components requiring a combination of high productivity,superior mechanical performance,and wide-ranging process adaptability.展开更多
文摘This paper studies the structural response of high-speed train wipers under the combined action of complex flow fields and scraping actions.The stress concentration areas are determined through simulation analysis,and the stress and aerodynamic load measurement points are reasonably arranged accordingly.The actual measurement is carried out in combination with the operating conditions of the existing lines.The stress variations and spectral characteristics of the train under different speed levels(80,160,180,200 km/h),tunnel entry and exit,and scraper action conditions were compared and analyzed.The stress amplification factors under tunnel intersection and scraper action were obtained,providing boundary conditions for the design of wipers for highspeed s.The research results show that the maximum stress of the wiper structure obtained through simulation calculation is concentrated at the connection of the wiper arm.Structural stress increases with the rise of speed grade.The stress increases by 1.11 times when the tunnel meets.When the scraper operates,the stress on the scraper arm increases by 4.1–7.6 times.Due to the broadband excitation effect of the aerodynamic load,the spectral energy of the structure is relatively high at the natural frequency,which excites the natural mode of the wiper.
基金Project(52372370)supported by the National Natural Science Foundation of ChinaProject(2023ZZTS0379)supported by the Graduate Student Independent Innovation Project of Central South University,ChinaProject(202206370058)supported by the China Scholarship Council。
文摘This paper proposes a passive control method to reduce peak values of slipstream and turbulent kinetic energy in a high-speed train wake by attaching vortex generators(VGs)onto the upper surface of the tail car.The impact of the VGs is assessed through the improved delayed detached eddy simulations(IDDES)after validating predictions against previous experimental measurements and other numerical predictions for the base case.The simulations indicate that strategically installed VGs can reduce the average slipstream velocity(U slipstream)and the upper limit of slipstream velocity(U_(slipstream,max))by~17%and~15%,respectively,as well as moving the peaks downstream by approximately train height,thus reducing the danger posed by slipstream to waiting passengers and trackside workers.Analysis shows that the wake turbulent kinetic energy diminishes as the vortex generators decelerate the downwash flow and reduce shear production in the wake.It is also found that the presence of VGs significantly impacts the flow on the upper surface near the tail by modifying the unsteady trailing longitudinal vortices through the formation of additional counter-rotating longitudinal vortices from the VGs.These latter vortices prevent the merging of vortical airflow around the trailing nose tip,which is otherwise induced by the longitudinal vortex of the train.They also reduce vortex intensity through cross-annihilation and cross diffusion as the wake advects downstream,limiting outwards advection through interaction with the image pair,and contributing to a decrease in the peak slipstream value.The method proposed offers a simple approach to wake control leading to significant slipstream benefits.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12393780,12032017,12302067)College Education Scientific Research Project of Hebei Province(Grant No.JZX2024006)Hebei Provincial S&T Program(Grant No.21567622 H).
文摘The axle box bearings of high-speed trains often operate in extremely harsh environments,bearing loads from different directions.Long-term operation and frequent changes in working conditions can easily lead to axle box bearing failures.Therefore,it is extremely important to study the mechanism of axle box bearings.Firstly,the medium of thermal deformation establishes a coupling relationship between the system dynamics model and the thermal grid model,and then obtains the thermal force coupling model of the high-speed train axle box bearing.The coupling model is validated from the perspectives of system dynamics response and temperature response,proving its effectiveness in system dynamics response and temperature characteristic response.Comparing the coupling model with the dynamics model,it is found that thermal deformation complicates the dynamic re-sponse.Finally,using the Lundberg-Palmgren(L-P)bearing fatigue calculation method and damage accumu-lation theory,the bearing fatigue life is calculated,and it is found that thermal deformation deteriorates the bearing operating environment,reducing the bearing fatigue life.Finally,by comparing the bearing fatigue life under different working conditions,it is concluded that the faster the vehicle speed,the greater the load,and the smaller the initial radial clearance of the bearing,the fatigue life of the bearing is reduced.The shorter the lifespan.
文摘Research on high-speed railways is a relatively new yet highly significant field in Vietnam.Among its key components,train control signaling plays a critical role,as it directly affects various interconnected systems,including infrastructure,traction power supply,operational planning,and overall railway safety.This article focuses on evaluating the capacity of the line based on the types of signals suitable for high-speed railways that have been effectively implemented in several European countries and successfully adapted in China.The research and simulation are conducted using MATLAB software,a reliable and widely adopted tool in the scientific community.The findings demonstrate that under normal conditions,the European Railway Traffic Management System/European Train Control System(ERTMS/ETCS)Level 2 signaling can support up to 23.7485 trains/hour/direction.Meanwhile,ERTMS/ETCS Level 3 with full moving block can accommodate up to 30.8735 trains/hour/direction,and ERTMS/ETCS Level 3 with fixed virtual blocks up to 29.4694 trains/hour/direction.In emergency scenarios,ERTMS/ETCS Level 3 with full moving block reduces headway by 33.27%compared to CTCS Level 3,while ERTMS/ETCS Level 3 with fixed virtual blocks achieves a 28.78%reduction.Overall,the ERTMS/ETCS Level 3 emerges as a state-of-the-art signaling technology offering high capacity and operational efficiency,and is recommended as a forward-looking solution for future implementation in Vietnam.
基金Supported by the National Natural Science Foundation of China(Grant Nos.12393783,12302067,12172235,52072249)Joint Funds of the National Natural Science Foundation of China(Grant No.U24A2003)+3 种基金College Education Scientific Research Project of Hebei Province(Grant No.JZX2024006)Central Guiding Local Scientific and Technological Development Funding Project(Grant No.246Z2206G)the Key Research Project of China State Railway Group Co.,Ltd.(Grant No.N2024T009)S&T Program of Hebei(Grant No.21567622H).
文摘As China's high-speed railway technology advances,high-speed trains have emerged as a pivotal mode of transportation,instrumental in facilitating passenger and freight mobility while fostering robust regional eco-nomic and trade interactions.Nonetheless,the safety of train operations remains a paramount concern,prompting extensive research into the dynamic behavior of critical components,which is essential to ensuring seamless and secure transportation services.This article commences by comprehensively reviewing the current landscape and evolutionary trajectory of dynamic model analysis for both traditional bearings and axle box bearings.Emphasis is placed on elucidating the profound influence of diverse bearing fault types on the system's kinematic state,alongside delving into the research methodologies employed in developing multi-physics field coupling models.Subsequently,it expounds on the content of investigations focusing on various wheel and track impairments,grounded in the dynamic modeling of the bearing vehicle coupling system.Concurrently,the intricate interplay between wheel-rail excitation and axle box bearing faults on the system's performance is elucidated.Concludingly,the article underscores the inadequacy of current multi-source fault diagnosis meth-odologies in tackling the intricacies of complex train operating environments,thereby highlighting its sig-nificance as a pressing and vital research agenda for the future.
基金sponsored by the National Natural Science Foundation of China(Grant No.52178100).
文摘The spatial offset of bridge has a significant impact on the safety,comfort,and durability of high-speed railway(HSR)operations,so it is crucial to rapidly and effectively detect the spatial offset of operational HSR bridges.Drive-by monitoring of bridge uneven settlement demonstrates significant potential due to its practicality,cost-effectiveness,and efficiency.However,existing drive-by methods for detecting bridge offset have limitations such as reliance on a single data source,low detection accuracy,and the inability to identify lateral deformations of bridges.This paper proposes a novel drive-by inspection method for spatial offset of HSR bridge based on multi-source data fusion of comprehensive inspection train.Firstly,dung beetle optimizer-variational mode decomposition was employed to achieve adaptive decomposition of non-stationary dynamic signals,and explore the hidden temporal relationships in the data.Subsequently,a long short-term memory neural network was developed to achieve feature fusion of multi-source signal and accurate prediction of spatial settlement of HSR bridge.A dataset of track irregularities and CRH380A high-speed train responses was generated using a 3D train-track-bridge interaction model,and the accuracy and effectiveness of the proposed hybrid deep learning model were numerically validated.Finally,the reliability of the proposed drive-by inspection method was further validated by analyzing the actual measurement data obtained from comprehensive inspection train.The research findings indicate that the proposed approach enables rapid and accurate detection of spatial offset in HSR bridge,ensuring the long-term operational safety of HSR bridges.
基金financially supported by the Swedish Transport Administration(Trafikverket)through the“Excellence Area 4”and FOI-BBT program(Grant Nos.BBT-2019-022 and BBT-TRV 2024/132497).
文摘Railway noise barriers are an essential piece of infrastructure for reducing noise propagation.However,these barriers experience aerodynamic loads generated by high-speed trains,leading to dynamic effects that may compromise their fatigue capacity.The most common structural design for railway noise barriers consists of vertical configurations of posts and panels.However,there have been few dynamic analyses of steel post/wood panel noise barriers under train-induced aerodynamic loads.This study used dynamic finite element analysis to assess the dynamic behavior of such noise barriers.Analysis of a 40-m-long noise barrier model and a triangular simplified load model,the latter of which effectively represented the detailed aerodynamic load,were first used to establish the model and input of the moving load during dynamic simulation.Then,the effects of different parameters on the dynamic response of the noise barrier were evaluated,including the damping ratio,the profile of the steel post,the span length of the panel,the barrier height,and the train speed.Gray relational analysis indicated that barrier height exhibited the highest correlations with the dynamic responses,followed by train speed,post profile,span length,and damping ratio.A reduction in the natural frequency and an increase in the train speed result in a higher peak response and more pronounced fluctuations between the nose and tail waves.The dynamic amplification factor(DAF)was found to be related to both the natural frequency and train speed.A model was proposed showing that the DAF significantly increases as the square of the natural frequency decreases and the cube of the train speed rises.
基金Under the auspices of Heilongjiang Provincial Natural Science Foundation of China(No.YQ2024D012),National Natural Science Foundation of China(No.42071162,42101165,42501220)。
文摘Under the background of‘the Belt and Road’and‘China-Mongolia-Russia Economic Corridor’initiatives,this paper studied the urban accessibility level,regional accessibility pattern and regional spatial effects along the Primorsky No.1 and No.2 transportation corridors.First,the evaluation of urban accessibility level with and without Primorsky No.1 and No.2 high-speed rails(HSRs)opening was conducted with two indicators,i.e.,the weighted average travel time,and the economic potential.After the evaluation,the spatial differentiation pattern of the accessibility changes with and without Primorsky No.1 and No.2 HSRs opening was performed respectively using ArcGIS.On these bases,the regional spatial effects brought by Primorsky No.1 and No.2 HSRs opening were studied.The results are as following.First,the urban accessibility level will be greatly improved by the opening of Primorsky No.1 and No.2 HSRs.All adjacent cities will be integrated into‘1 h HSR communication circle’and the whole journey will be integrated into‘4 h HSR communication circle’along Primorsky No.1 and No.2 corridors,respectively.The HSR accessibility of Primorsky No.1 corridor is stronger than that of Primorsky No.2 corridor.But the HSR accessibility improvement degree of Primorsky No.1 corridor is weaker than that of Primorsky No.2 corridor.Second,spatially,along Primorsky No.1 and No.2 corridors,the HSR accessibility level of the cities which are located in China is stronger than those cities located in Russia,showing the‘High West,Low East’patterns.The HSR accessibility improvement degree of the cities which are located in Russia and Sino-Russian border is stronger than those cities located in China,showing the‘High East,Low West’patterns.Third,Primorsky No.1 and No.2 corridors could connect the China’s‘Heilongjiang Land Sea Silk Road Economic Belt’and‘Changchun-Jilin-Tumen Development Pilot Zone’respectively,gradually involving into the development of China’s Harbin-Changchun Megalopolis.Relying on Harbin(China)and Changchun(China),Primorsky No.1 and No.2 HSRs could connect Northeast China-Beijing HSR,accelerating the diffusion of population,economy and other flows from China’s Beijing-Tianjin-Hebei Urban Agglomeration to Northeast China,and then to Russia’s Far East Federal District.Relying on Suifenhe(China)and Hunchun(China),Primorsky No.1 and No.2 HSRs could be conducive to the development of the second largest sea channels for Northeast China,creating the Northeast Asian Urban Belt,and new sea-rail intermodal pattern among China,Russia,Democratic People’s Republic of Korea,Japan and Republic of Korea.Relying on Vladivostok(Russia)and Zarubino(Russia),Primorsky No.1 and No.2 corridors could connect the‘Ice Silk Road’,building the‘Sino-Russian Northern Maritime Corridor’and‘Sino-Russian Arctic Blue Economic Areas’.
基金Supported by Shanghai Nuclear Engineering Research&Design Institute Co.,Ltd.
文摘Current sway test platforms for marine nuclear equipment face challenges in meeting the GJB 150.23A requirements.This is primarily because of the performance limitations of conventional actuators under extreme marine conditions.This study aimed to overcome these constraints using an innovative parallel mechanism design.We developed a novel 6-PUS parallel platform featuring six kinematic chains with hybrid series-parallel actuators.Each chain combines(1)force-speed adaptive transmission,(2)redundant motor-driven dual-screw actuation,and(3)passive load-balancing mechanisms.Comprehensive kinematic/dynamic modeling and experimental validation were conducted.Tests demonstrated the capability of the platform to achieve cyclic speeds of±45°/7 s and±30°/3 s while supporting 10-ton loads.Successful sway tests on nuclear components(reactor pressurizer and control rod drive mechanism)confirmed the operational reliability.This work presented three key innovations:(1)a new parallel-platform architecture that overcomes the limitations of conventional actuators;(2)integrated hybrid actuation with adaptive transmission;and(3)high-speed,heavy-load performance that meets stringent marine testing standards.This solution significantly advances nuclear equipment qualification testing technology.
基金Supported by National Key Research and Development Program of China(Grant No.2018YFB1201704)National Natural Science Foundation of China(Major Program,Grant No.11790281)
文摘The current method of estimating the fatigue life of railway structures is to calculating the equivalent stress amplitude based on the measured stress data. However, the random of the measured data is not considered. In this paper, a new method was established to compute the equivalent stress amplitude to evaluate the fatigue damage based on the measurable randomness, since the equivalent stress is the key parameter for assessment of structure fatigue life and load derivation. The equivalent stress amplitude of a high-speed train welded bogie frame was found to obey normal distribution under uniform operation route that verified by on-track dynamic stress data, and the proposed model is, in effect, an improved version of the mathematical model used to calculate the equivalent stress amplitude. The data of a long-term, on-track dynamic stress test program was analyzed to find that the normal distribution parameters of equivalent stress amplitude values differ across different operation route. Thus, the fatigue damage of the high-speed train welded bogie frame can be evaluated by the proposed method if the running schedule of the train is known a priori. The results also showed that the equivalent stress amplitude of the region connected to the power system is more random than in other regions of the bogie frame.
基金National Natural Science Foundation of China under Grant Nos.51622803,51378177 and 51420105013the 111 Project under Grant No.B13024
文摘Piled embankments,which offer many advantages,are increasingly popular in construction of high-speed railways in China.Although the performance of piled embankment under static loading is well-known,the behavior under the dynamic train load of a high-speed railway is not yet understood.In light of this,a heavily instrumented piled embankment model was set up,and a model test was carried out,in which a servo-hydraulic actuator outputting M-shaped waves was adopted to simulate the process of a running train.Earth pressure,settlement,strain in the geogrid and pile and excess pore water pressure were measured.The results show that the soil arching height under the dynamic train load of a high-speed railway is shorter than under static loading.The growth trend for accumulated settlement slowed down after long-term vibration although there was still a tendency for it to increase.Accumulated geogrid strain has an increasing tendency after long-term vibration.The closer the embankment edge,the greater the geogrid strain over the subsoil.Strains in the pile were smaller under dynamic train loads,and their distribution was different from that under static loading.At the same elevation,excess pore water pressure under the track slab was greater than that under the embankment shoulder.
基金Key Subject for Science Research and De-velopment Plan of Railway Ministry (No.2006G004-B)
文摘To simulate the fatigue characteristics of the pile-board structure under long-term dynamic load, using the in-situ dynamic testing system DTS-1, the forced vibration loading was repeated one million times at different cross-sections of the pile-board structure for high-speed railway. The dynamic deformation, permanent deformation and dynamic stress of main reinforcements were measured. The test results show that the dynamic responses of the pile-board structure almost did not vary with the forced vibration times under the simulated trainload. After one million times of forced vibration, the permanent deformations of the midspan section of intermediate span and midspan section of side span were 0.7 mm and 0. 6 mm, respectively, and there was no accumulative plastic deformation at the bearing section of intermediate span.
基金supported by a Major Programme of the National Science and Technology Support,China Grant(2013BAG24B00),under the project“Key technologies and engineering application demonstration of High-speed train for energy saving”.
文摘A series of tests have been conducted using a Cryogenic Wind Tunnel to study the effect of Reynolds number(Re)on the aerodynamic force and surface pressure experienced by a high speed train.The test Reynolds number has been varied from 1 million to 10 million,which is the highest Reynolds number a wind tunnel has ever achieved for a train test.According to our results,the drag coefficient of the leading car decreases with higher Reynolds number for yaw angles up to 30º.The drag force coefficient drops about 0.06 when Re is raised from 1 million to 10 million.The side force is caused by the high pressure at the windward side and the low pressure generated by the vortex at the lee side.Both pressure distributions are not appreciably affected by Reynolds number changes at yaw angles up to 30°.The lift force coefficient increases with higher Re,though the change is small.At a yaw angle of zero the down force coefficient is reduced by a scale factor of about 0.03 when the Reynolds number is raised over the considered range.At higher yaw angles the lift force coefficient is reduced about 0.1.Similar to the side force coefficient,the rolling moment coefficient does not change much with Re.The magnitude of the pitching moment coefficient increases with higher Re.This indicates that the load on the front bogie is higher at higher Reynolds numbers.The yawing moment coefficient increases with Re.This effect is more evident at higher yaw angles.The yawing moment coefficient increases by about 6%when Re is raised from 1 million to 10 million.The influence of Re on the rolling moment coefficient around the leeward rail is relatively smaller.It increases by about 2%over the considered range of Re.
基金Projects(51878674,52108433,52022113) supported by the National Natural Science Foundation of ChinaProject(2019RS3009) supported by the Hunan Innovative Provincial Construction,China+2 种基金Project(2021JJ40587) supported by the Hunan Provincial Natural Science Foundation of ChinaProject(21B0309) supported by the Research Foundation of Education Bureau of Hunan Province,ChinaProject(HSR202004) supported by the Open Foundation of National Engineering Research Center of High-Speed Railway Construction Technology,China。
文摘China’s high-speed railways are always facing the potential damage risk induced by strong earthquakes.And the route design concept of“using bridge instead of embankment”has also greatly increased the probability of high speed trains moving on bridges when a strong earthquake happens.In the past decades,a bunch of theoretical and numerical studies have been conducted in the seismic dynamic field of high-speed railway.However,the effective dynamic test system for verifying the given method and theoretical results is still lacking.Therefore,a novel dynamic test system(DTS)consisting of a shaking table array and a train-pass-bridge reduced-scale model is proposed in this paper.Through some crucial technical problems discussion,the effectiveness of similar design scheme and the feasibility of reduced-scale DTS are elaborated,and then the detailed DTS structures are given and displayed as part-by-part.On this basis,the demonstration tests are conducted and compared with the numerical simulation.The results show that the proposed DTS is accurate and effective.Therefore,the DTS can provide a new physical simulation approach to study the high-speed train’s running safety on bridges under earthquakes and can also provide a reference for the construction of related systems.
基金Project(24A0006)supported by the Key Project of Scientific Research Fund of Hunan Provincial Department of Education,ChinaProject(2024JJ5430)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(2024JK2045,2023RC3061)supported by the Science and Technology Innovation Program of Hunan Province,China。
文摘A high-speed train travelling from the open air into a narrow tunnel will cause the“sonic boom”at tunnel exit.When the maglev train’s speed reaches 600 km/h,the train-tunnel aerodynamic effect is intensified,so a new mitigation method is urgently expected to be explored.This study proposed a novel asymptotic linear method(ALM)for micro pressure wave(MPW)mitigation to achieve a constant gradient of initial c ompression waves(ICWs),via a study with various open ratios on hoods.The properties of ICWs and MPWs under various open ratios of hoods were analyzed.The results show that as the open ratio increases,the MPW amplitude at the tunnel exit initially decreases before rising.At the open ratio of 2.28%,the slope of the ICW curve is linearly coincident with a supposed straight line in the ALM,which further reduces the MPW amplitude by 26.9%at 20 m and 20.0%at 50 m from the exit,as compared to the unvented hood.Therefore,the proposed method effectively mitigates MPW and quickly determines the upper limit of alleviation for the MPW amplitude at a fixed train-tunnel operation condition.All achievements provide a ne w potential measure for the adaptive design of tunnel hoods.
文摘According to the valve port features of high speed on-off valve and its actions,the valve port can be simplified into an a-type half bridge construction.A method that tests the dynamic characteristics of the high speed on-off valve by the output pressure signal of the a-type half bridge is proposed.Having analyzed the factors related to the dynamic characteristics of an a-type half bridge,a rule for designing the outlet chamber's volume is worked out.According to the rule,a test stand is built to test the self-developed high-speed on-off valve.From the test results,it can be seen that with the outlet chamber's volume controlled by the rule the rise time of the pressure signals driven by signals with different frequencies changes very little.The test results conform to the simulation results,which nroves the correctness of the method.
文摘For the purpose of establishing and validating aerodynamic performance predictions at transonic Mach numbers, a wind tunnel test was conducted in the High-Speed Tunnel（HST） of the German-Dutch Wind Tunnels. The test article is the aerodynamic validation model from the Chinese Aeronautical Establishment, which is a full-span scale model representation of a business jet aircraft. The wind tunnel test comprised of parallel deployments of balance, pressures, infrared thermography, and model marker measurement techniques. Dedicated investigations with a dummy support were conducted as well, in order to derive and correct for the interference that the support system imposed on the overall model loads. This enabled the establishment of a comprehensive dataset in which the steady overall model loads, the wing load distribution, the state of the wing boundary layer, and the aeroelastic wing shape were quantified for conditions up to and beyond the cruise Mach number of 0.85.
基金funded by the Fund Project of China Academy of Railway Sciences Corporation Limited[Grant No.2022YJ194,2023YJ254].
文摘Purpose-This paper aims to analyze the stress and strain distribution on the track wheel web surface and study the optimal strain gauge location for force measurement system of the track wheel.Design/methodology/approach-Finite element method was employed to analyze the stress and strain distribution on the track wheel web surface under varying wheel-rail forces.Locations with minimal coupling interference between vertical and lateral forces were identified as suitable for strain gauge installation.Findings-The results show that due to the track wheel web’s unique curved shape and wheel-rail force loading mechanism,both tensile and compressive states exit on the surface of the web.When vertical force is applied,Mises stress and strain are relatively high near the inner radius of 710 mm and the outer radius of 1110mmof the web.Under lateral force,high Mises stress and strain are observed near the radius of 670mmon the inner and outer sides of the web.As the wheel-rail force application point shifts laterally toward the outer side,the Mises stress and strain near the inner radius of 710 mm of the web gradually decrease under vertical force while gradually increasing near the outer radius of 1110 mm of the web.Under lateral force,the Mises stress and strain on the surface of the web remain relatively unchanged regardless of the wheel-rail force application point.Based on the analysis of stress and strain on the surface of the web under different wheel-rail forces,the inner radius of 870 mm is recommended as the optimal mounting location of strain gauges for measuring vertical force,while the inner radius of 1143 mm is suitable for measuring lateral force.Originality/value-The research findings provide valuable insights for determining optimal strain gauge locations and designing an effective track wheel force measurement system.
基金This work was supported by the National Natural Science Foundation of China[Grant Nos.11790283,51978587,51708457]the Program of Introducing Talents of Discipline to Universities(111 Project)[Grant No.B16041].
文摘Motivated by the huge practical engineering demand for the fundamental understanding of mechanical characteristics of high-speed railway infrastructure,a fullscale multi-functional test platform for high-speed railway track–subgrade system is developed in this paper,and its main functions for investigating the mechanical performance of track–subgrade systems are elaborated with three typical experimental examples.Comprising the full-scale subgrade structure and all the five types of track structures adopted in Chinese high-speed railways,namely the CRTS I,the CRTS II and the CRTS III ballastless tracks,the double-block ballastless track and the ballasted track,the test platform is established strictly according to the construction standard of Chinese high-speed railways.Three kinds of effective loading methods are employed,including the real bogie loading,multi-point loading and the impact loading.Various types of sensors are adopted in different components of the five types of track–subgrade systems to measure the displacement,acceleration,pressure,structural strain and deformation,etc.Utilizing this test platform,both dynamic characteristics and long-term performance evolution of high-speed railway track–subgrade systems can be investigated,being able to satisfy the actual demand for large-scale operation of Chinese high-speed railways.As examples,three typical experimental studies are presented to elucidate the comprehensive functionalities of the full-scale multi-functional test platform for exploring the dynamic performance and its long-term evolution of ballastless track systems and for studying the long-term accumulative settlement of the ballasted track–subgrade system in high-speed railways.Some interesting phenomena and meaningful results are captured by the developed test platform,which provide a useful guidance for the scientific operation and maintenance of high-speed railway infrastructure.
基金supported by the National Research Foundation of Korea(NRF)grants funded by the Korea government(MSIT)(Nos.RS-2024–00351052 and RS-2024–00450561).
文摘This study compares the microstructural evolution,dynamic recrystallization(DRX)behavior,tensile properties,and age-hardenability between the newly developed high-speed-extrudable BA56 alloy and those of the widely recognized AZ31 alloy in industry.Unlike the AZ31 alloy,which retains partially unrecrystallized grains,the high-speed-extruded BA56 alloy demonstrates a coarser but entirely recrystallized and more homogeneous microstructure.The fine-grained structure and abundant Mg_(3)Bi_(2) particles in the BA56 extrusion billet significantly enhance its DRX behavior,thus enabling rapid and complete recrystallization during extrusion.The BA56 alloy contains band-like fragmented Mg_(3)Bi_(2) particles and numerous fine Mg_(3)Bi_(2) particles distributed throughout the material,in contrast to the sparse Al_(8)Mn_(5) particles in the AZ31 alloy.These features contribute to superior mechanical properties of the BA56 alloy,which achieves tensile yield and ultimate tensile strengths of 205 and 292 MPa,respectively,compared to 196 and 270 MPa for the AZ31 alloy.The superior strength of the BA56 alloy,even with its coarser grain size,can be explained by its elevated Hall-Petch constant and the strengthening contribution from the fine Mg_(3)Bi_(2) particles.Additionally,the BA56 alloy demonstrates significant age-hardenability,achieving a 22%enhancement in hardness following T5 aging,attributed to the precipitation of nanoscale Mg_(3)Bi_(2) and Mg_(17)Al_(12) phases.By contrast,the AZ31 alloy shows minimal hardening due to the absence of precipitate formation during aging.These findings suggest that the BA56 alloy is a promising candidate for the production of extruded Mg components requiring a combination of high productivity,superior mechanical performance,and wide-ranging process adaptability.
