The hydrodynamic lifting force acting on a gate with high head is one of the key factors concerning the safety and reliability of gates. The lifting force is closely related to hydrodynamic pressure, and generally, is...The hydrodynamic lifting force acting on a gate with high head is one of the key factors concerning the safety and reliability of gates. The lifting force is closely related to hydrodynamic pressure, and generally, is obtained through the model test. This work presents a method of numerical simulation based on the VOF method for the flow and FEM for the structure of a gate to investigate this kind of the lifting force. The physical model experiments were conducted about the hydrodynamic pressure and the lifting force to verify the numerical results. The comparisons of those two methods show that the maximum relative error is smaller than 11.40 % and the method presented in this paper is feasible and could be used in the designs of hydropower projects.展开更多
To study the serious valve top gap cavitation of Datengxia high head single-lift ship lock,the 1:1 scale slice experiment is carried out,to truly reveal the gap flow characteristics,as well as the valve top gap cavita...To study the serious valve top gap cavitation of Datengxia high head single-lift ship lock,the 1:1 scale slice experiment is carried out,to truly reveal the gap flow characteristics,as well as the valve top gap cavitation characteristics and the anti-cavitation mechanism of natural aeration.Three kinds of cavitation,namely,the throat cavitation,the mainstream inner cavitation,and the valve plate cavitation,are determined and they are found to occur step-by-step in the gap section in the development of the cavitation.According to the anti-cavitation mechanism of the natural aeration,the pressure of the gap flow through the ventilation is increased,to avoid the mainstream inner cavitation and the valve plate cavitation,and to weaken the throat cavitation.The negative pressure zone in the gap section gradually extends with the development of the cavitation until the gap section is filled with a stable−10 m water head.When the natural aeration measure is employed,the pressure in the gap section approximately reaches the−2 m water head,and the cavitation disappears.The systematic tests reveal the quadratic polynomial relationship between the pressure in the gap and the ventilation per meter width.The pressure,which corresponds to the maximum value of the ventilation at the beginning of the gap,approximately reaches the−2 m water head,and the pressure and the ventilation reach the equilibrium state limit.When the pressure in the gap increases when the valve is opened,the ventilation gradually decreases until the natural aeration stops.The gap section length for the high head valves has a great effect on the natural aeration and should be long enough to maintain the stable negative pressure in the gap,whereas the throat width has a minimal effect.Results can be used for the anti-cavitation design of the high head lock valve.展开更多
The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seas...The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.展开更多
Senior high school students are in a sensitive period of emotional and psychological development. The head teachers and teachers need to give them active guidance to help them establish a correct outlook on life and v...Senior high school students are in a sensitive period of emotional and psychological development. The head teachers and teachers need to give them active guidance to help them establish a correct outlook on life and values. However, in the actual teaching process, many high school head teachers' own quality is not high, their sense of responsibility is not strong, and they do not pay attention to the moral education work and other factors lead to the unsatisfactory effect of the moral education work in high schools. Therefore, schools need to take further optimization measures to strengthen their awareness of the importance of moral education, to promote the effective development and positive practice of moral education, and to cultivate more ideological, cultural and moral socialist successors for national development. Next, the article discusses the causes and countermeasures of the low efficiency of the moral education of high school head teachers.展开更多
To explore the variation of permeability and deformation behaviors of a fractured rock mass in high water pressure,a high pressure permeability test（HPPT）,including measuring sensors of pore water pressure and displ...To explore the variation of permeability and deformation behaviors of a fractured rock mass in high water pressure,a high pressure permeability test（HPPT）,including measuring sensors of pore water pressure and displacement of the rock mass,was designed according to the hydrogeological condition of Heimifeng pumped storage power station.With the assumption of radial water flow pattern in the rock mass during the HPPT,a theoretical formula was presented to estimate the coefficient of permeability of the rock mass using water pressures in injection and measuring boreholes.The variation in permeability of the rock mass with the injected water pressure was studied according to the suggested formula.By fitting the relationship between the coefficient of permeability and the injected water pressure,a mathematical expression was obtained and used in the numerical simulations.For a better understanding of the relationship between the pore water pressure and the displacement of the rock mass,a 3D numerical method based on a coupled hydro-mechanical theory was employed to simulate the response of the rock mass during the test.By comparison of the calculated and measured data of pore water pressure and displacement,the deformation behaviors of the rock mass were analyzed.It is shown that the variation of displacement in the fractured rock mass is caused by water flow passing through it under high water pressure,and the rock deformation during the test could be calculated by using the coupled hydro-mechanical model.展开更多
Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statist...Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statistics of the current research and applications of VR training systems in mining industry, all the input/output devices are classified. Based on the classifications of the input/output devices that are used in the VR system, the current VR training systems for the mining industry could be divided into three types: screen-based general type, projector-based customized type, and head-mounted display(HMD)-based intuitive type. By employing a VR headset, a smartphone and a leap motion device, an HMDbased intuitive type VR training system prototype for drilling in underground mines has been developed.Ten trainees tried both the HMD-based intuitive system and the screen-based general control system to compare the experiences and training effects. The results show that the HMD-based system can give a much better user experience and is easy to use. Three of the five components of a VR training system,namely, the user, the tasks, and software and database should be given more attention in future research.With more available technologies of input and output devices, VR engines, and system software, the VR training system will eventually yield much better training results, and will play a more important role in as a training tool for mine safety.展开更多
基金supported by the National Natural Science Foundation of China (Grant No.51079044)
文摘The hydrodynamic lifting force acting on a gate with high head is one of the key factors concerning the safety and reliability of gates. The lifting force is closely related to hydrodynamic pressure, and generally, is obtained through the model test. This work presents a method of numerical simulation based on the VOF method for the flow and FEM for the structure of a gate to investigate this kind of the lifting force. The physical model experiments were conducted about the hydrodynamic pressure and the lifting force to verify the numerical results. The comparisons of those two methods show that the maximum relative error is smaller than 11.40 % and the method presented in this paper is feasible and could be used in the designs of hydropower projects.
基金Project supported by the National Nature Science Foundation of China(Grant Nos.51479124,51779151).
文摘To study the serious valve top gap cavitation of Datengxia high head single-lift ship lock,the 1:1 scale slice experiment is carried out,to truly reveal the gap flow characteristics,as well as the valve top gap cavitation characteristics and the anti-cavitation mechanism of natural aeration.Three kinds of cavitation,namely,the throat cavitation,the mainstream inner cavitation,and the valve plate cavitation,are determined and they are found to occur step-by-step in the gap section in the development of the cavitation.According to the anti-cavitation mechanism of the natural aeration,the pressure of the gap flow through the ventilation is increased,to avoid the mainstream inner cavitation and the valve plate cavitation,and to weaken the throat cavitation.The negative pressure zone in the gap section gradually extends with the development of the cavitation until the gap section is filled with a stable−10 m water head.When the natural aeration measure is employed,the pressure in the gap section approximately reaches the−2 m water head,and the cavitation disappears.The systematic tests reveal the quadratic polynomial relationship between the pressure in the gap and the ventilation per meter width.The pressure,which corresponds to the maximum value of the ventilation at the beginning of the gap,approximately reaches the−2 m water head,and the pressure and the ventilation reach the equilibrium state limit.When the pressure in the gap increases when the valve is opened,the ventilation gradually decreases until the natural aeration stops.The gap section length for the high head valves has a great effect on the natural aeration and should be long enough to maintain the stable negative pressure in the gap,whereas the throat width has a minimal effect.Results can be used for the anti-cavitation design of the high head lock valve.
基金supported by China National 863 Program(2001AA211191)100 Innovation Projects of Guangdong Province(2KB64804N)Natural Science Foundation of Guangdong Province(990501).
文摘The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.
文摘Senior high school students are in a sensitive period of emotional and psychological development. The head teachers and teachers need to give them active guidance to help them establish a correct outlook on life and values. However, in the actual teaching process, many high school head teachers' own quality is not high, their sense of responsibility is not strong, and they do not pay attention to the moral education work and other factors lead to the unsatisfactory effect of the moral education work in high schools. Therefore, schools need to take further optimization measures to strengthen their awareness of the importance of moral education, to promote the effective development and positive practice of moral education, and to cultivate more ideological, cultural and moral socialist successors for national development. Next, the article discusses the causes and countermeasures of the low efficiency of the moral education of high school head teachers.
文摘To explore the variation of permeability and deformation behaviors of a fractured rock mass in high water pressure,a high pressure permeability test（HPPT）,including measuring sensors of pore water pressure and displacement of the rock mass,was designed according to the hydrogeological condition of Heimifeng pumped storage power station.With the assumption of radial water flow pattern in the rock mass during the HPPT,a theoretical formula was presented to estimate the coefficient of permeability of the rock mass using water pressures in injection and measuring boreholes.The variation in permeability of the rock mass with the injected water pressure was studied according to the suggested formula.By fitting the relationship between the coefficient of permeability and the injected water pressure,a mathematical expression was obtained and used in the numerical simulations.For a better understanding of the relationship between the pore water pressure and the displacement of the rock mass,a 3D numerical method based on a coupled hydro-mechanical theory was employed to simulate the response of the rock mass during the test.By comparison of the calculated and measured data of pore water pressure and displacement,the deformation behaviors of the rock mass were analyzed.It is shown that the variation of displacement in the fractured rock mass is caused by water flow passing through it under high water pressure,and the rock deformation during the test could be calculated by using the coupled hydro-mechanical model.
基金funded by the ‘‘twelfth five” National Key Technology Research and Development Program of the Ministry of Science and Technology of China (Grant No. 2015BAK10B00)
文摘Virtual reality(VR) training technology in the mining industry is a new field of research and utilization.The successful application of VR training system is critical to mine safety and production. Through the statistics of the current research and applications of VR training systems in mining industry, all the input/output devices are classified. Based on the classifications of the input/output devices that are used in the VR system, the current VR training systems for the mining industry could be divided into three types: screen-based general type, projector-based customized type, and head-mounted display(HMD)-based intuitive type. By employing a VR headset, a smartphone and a leap motion device, an HMDbased intuitive type VR training system prototype for drilling in underground mines has been developed.Ten trainees tried both the HMD-based intuitive system and the screen-based general control system to compare the experiences and training effects. The results show that the HMD-based system can give a much better user experience and is easy to use. Three of the five components of a VR training system,namely, the user, the tasks, and software and database should be given more attention in future research.With more available technologies of input and output devices, VR engines, and system software, the VR training system will eventually yield much better training results, and will play a more important role in as a training tool for mine safety.
