In order to reduce time and cost in engineering design, such as gate design, integral field knowledge must be obtained efficiently. After studying ID3 and its improved methods, a new algorithm(Fuzzy ID3 ) and its main...In order to reduce time and cost in engineering design, such as gate design, integral field knowledge must be obtained efficiently. After studying ID3 and its improved methods, a new algorithm(Fuzzy ID3 ) and its main concepts are presented to overcome some disadvantage in classical ID3 algorithms. In its application of gate design, fuzzy knowledge gotten by the new algorithm is more efficient than the knowledge by other ID3 algorithms, the set of fuzzy knowledge is much smaller than that of knowledge by classical ID3 algorithms. On the other hand, fuzzy knowledge represents field data more naturally to the way of bar thinking and more robust in tolerating imprecise, conflicting and missing information展开更多
This paper proposes a novel design paradigm for circuits designed in quantum dot cellular automata （QCA） technology. Previously reported QCA circuits in the literature have generally been designed in a single layer ...This paper proposes a novel design paradigm for circuits designed in quantum dot cellular automata （QCA） technology. Previously reported QCA circuits in the literature have generally been designed in a single layer which is the main logical block in which the inverter and majority gate are on the base layer, except for the parts where multilayer wire crossing was used. In this paper the concept of multilayer wire crossing has been extended to design logic gates in multilayers. Using a 5-input majority gate in a multilayer, a 1-bit and 2-bit adder have been designed in the proposed multilayer gate design paradigm. A comparison has been made with some adders reported previously in the literature and it has been shown that circuits designed in the proposed design paradigm are much more efficient in terms of area, the requirement of QCA cells in the design and the input-output delay of the circuit. Over all, the availability of one additional spatial dimension makes the design process much more flexible and there is scope for the customizability of logic gate designs to make the circuit compact.展开更多
In this study, it is aimed to determine the ranking importance levels of the stages to be taken into consideration for new product development on a global scale in the automotive design process. New product design act...In this study, it is aimed to determine the ranking importance levels of the stages to be taken into consideration for new product development on a global scale in the automotive design process. New product design activity and stage-gate process differences between local automotive firms (serial production factory and stage-gate department in Turkey) and global automotive companies (serial production factory and stage-gate department in Turkey) are examined comparatively in the research area. In the automotive industry, which has been developing for a century, the question of how the local company products operating in the last sixty years have not been able to spread globally or how to develop global products is the background question of the research. For this purpose, one on one interviews were held with the managers of 3 national and 3 international automotive companies, who worked in the same region and who had previously designed a new vehicle, with design and product development departments.?According to?the data obtained by the AHP (Analytic Hierarchy Process) in the automotive design process, the importance of the criteria that should be taken into account for global product development has revealed. According to the results of the study, it was found that design validation stages were the most important globalization criterion in automotive design process as a new study area. In the comprehensive survey of the study, no other publication has been encountered to measure or evaluate the stages in the automotive design and new product development process in other sectors, including the vehicle industry. As in every industry sector, in the automotive industry, with the new product companies provide market development or competitive advantage. The new product is the life channel of a company and in the realization of this new vehicle;the disciplines of the automotive industry are formed by a hundred years of experience.展开更多
The design of casting gating system directly determines the solidification sequence,defect severity,and overall quality of the casting.A novel machine learning strategy was developed to design the counter pressure cas...The design of casting gating system directly determines the solidification sequence,defect severity,and overall quality of the casting.A novel machine learning strategy was developed to design the counter pressure casting gating system of a large thin-walled cabin casting.A high-quality dataset was established through orthogonal experiments combined with design criteria for the gating system.Spearman’s correlation analysis was used to select high-quality features.The gating system dimensions were predicted using a gated recurrent unit(GRU)recurrent neural network and an elastic network model.Using EasyCast and ProCAST casting software,a comparative analysis of the flow field,temperature field,and solidification field can be conducted to demonstrate the achievement of steady filling and top-down sequential solidification.Compared to the empirical formula method,this method eliminates trial-and-error iterations,reduces porosity,reduces casting defect volume from 11.23 cubic centimeters to 2.23 cubic centimeters,eliminates internal casting defects through the incorporation of an internally cooled iron,fulfilling the goal of intelligent gating system design.展开更多
This study aimed at designing and assembling an improvised Logic Gates Simulator that can be utilized as an instructional device in basic digital electronics instruction at Caraga State University Cabadbaran Campus, P...This study aimed at designing and assembling an improvised Logic Gates Simulator that can be utilized as an instructional device in basic digital electronics instruction at Caraga State University Cabadbaran Campus, Philippines. This instructional device is believed to enhance the teaching-learning process and would also help address the scarcity of instructional equipment in the school and in the country. Descriptive method of research was employed to come up with the design of the simulator based on the course content of basic digital electronics subject. Acceptability of the improvised simulator based on standards set in this study was?gathered from the experts as respondents using a self-made questionnaire. The data were treated using average weighted mean utilizing parametric scales with verbal descriptions. Findings revealed that the improvised logic gates simulator is highly acceptable in terms of its cost and availability of components,?design and construction,operations, and troubleshooting features. It is concluded that the improvised logic gates simulator is at par in terms of standards on instructional devices based on the evaluation results of experts and is therefore recommended to be used in basic digital electronics instruction. The simulator is an innovative answer and an alternate solution to the scarcity of instructional materials and devices at Caraga State University Cabadbaran Campus.展开更多
Reversible logic is a new emerging technology with many promising applications in optical information processing, low power (Complementary Metal Oxide Semiconductor) CMOS design, (De Oxy RiboNucleic Acid) DNA computin...Reversible logic is a new emerging technology with many promising applications in optical information processing, low power (Complementary Metal Oxide Semiconductor) CMOS design, (De Oxy RiboNucleic Acid) DNA computing, etc. In industrial automation, comparators play an important role in segregating faulty patterns from good ones. In previous works, these comparators have been implemented with more number of reversible gates and computational complexity. All these comparators use propagation technique to compare the data. This will reduce the efficiency of the comparators. To overcome the problem, this paper proposes an efficient comparator using (Thapliyal Ranganathan) TR gate utilizing full subtraction and half subtraction algorithm which will improve the computation efficiency. The comparator design using half subtraction algorithm shows an improvement in terms of quantum cost. The comparator design using full subtraction algorithm shows effectiveness in reducing number of reversible gates required and garbage output.展开更多
This paper addresses the challenges of System-on-Chip designs using High-Level Synthesis (HLS). HLS tools convert algorithms designed in C into hardware modules. This approach is a practical choice for developing comp...This paper addresses the challenges of System-on-Chip designs using High-Level Synthesis (HLS). HLS tools convert algorithms designed in C into hardware modules. This approach is a practical choice for developing complex applications. Nevertheless, certain hardware considerations are required when writing C applications for HLS tools. Hence, in order to demonstrate the fundamental hardware design concepts, a case studyis presented. Fast Fourier Transform (FFT) implementation in ANSI C is examined in order to explore the important design issues such as concurrency, data recurrences and memory accesses that need to be resolved before generating the hardware using HLS tools. There are additional language constraints that need to be addressed including use of pointers, recursion and floating point types.展开更多
Epilepsy is described as the most common chronic brain disorder. A typical symptom of epilepsy results in uncontrolled convulsions caused by temporary excessive neuronal discharges. Although several new anticon-vulsan...Epilepsy is described as the most common chronic brain disorder. A typical symptom of epilepsy results in uncontrolled convulsions caused by temporary excessive neuronal discharges. Although several new anticon-vulsants have been introduced, some types of seizures have still not been adequately controlled with these new and current therapies. There is an urgent need to develop new anticonvulsant drugs to control the many different types of seizures. Many studies have shown that the epilepsies involve more than one mechanism and therefore may be responsible for the various types of observed seizures. Recently reported studies have shown that a group of newly synthesized 6 Hz active anticonvulsant fluorinated N-benzamide enaminones exhibited selective inhibitions of voltage-gated sodium (Nav) channels. Nav channels are responsible for the initial inward currents during the depolarization phases of the action potential in excitable cells. The activation and opening of Nav channels result in the initial phases of action potentials. We hypothesize that there is an essential pharmacophore model for the interactions between these enaminones and the active sites of Nav channels. The research reported here is focused on molecular docking studies of the interactions that occur between the fluorinated N-benzamide enaminones and the Nav channels. These studies may open an avenue for designing anticonvulsant drugs by inhibiting Nav channels.展开更多
As integrated circuits scale down in size, a single high-energy ion strike often affects multiple adjacent logic nodes.The so-called single-event transient（SET） pulse quenching induced by single-event charge sharing...As integrated circuits scale down in size, a single high-energy ion strike often affects multiple adjacent logic nodes.The so-called single-event transient（SET） pulse quenching induced by single-event charge sharing collection has been widely studied. In this paper, SET pulse quenching enhancement is found in dummy gate isolated adjacent logic nodes compared with that isolated by the common shallow trench isolation（STI）. The physical mechanism is studied in depth and this isolation technique is explored for SET mitigation in combinational standard cells. Three-dimensional（3D） technology computer-aided design simulation（TCAD） results show that this technique can achieve efficient SET mitigation.展开更多
在TFT-LCD驱动的关键设计技术中,抖动算法FRC(frame rate control)是一种重要的技术。它能够用6 bit source的输出来达到8 bit full color(16.7 M colors)的显示效果,这样可以降低数据传输率以降低功耗,同时可以节省源驱动(Source Drive...在TFT-LCD驱动的关键设计技术中,抖动算法FRC(frame rate control)是一种重要的技术。它能够用6 bit source的输出来达到8 bit full color(16.7 M colors)的显示效果,这样可以降低数据传输率以降低功耗,同时可以节省源驱动(Source Driver,SD)芯片的面积。通过分析和实践,提出了针对用于平板电脑的Dual-Gate TFT-LCD屏和翻转方式,需要采用优化的FRC算法提高显示效果。在应用于平板电脑的dual-gate TFT-LCD屏的FRC方案中,分析了传统方案产生周期性竖线的原因,然后提出了改进方案,消除了竖线,提高了显示质量。最后,总结了FRC算法具体需要考虑的因素。展开更多
文摘In order to reduce time and cost in engineering design, such as gate design, integral field knowledge must be obtained efficiently. After studying ID3 and its improved methods, a new algorithm(Fuzzy ID3 ) and its main concepts are presented to overcome some disadvantage in classical ID3 algorithms. In its application of gate design, fuzzy knowledge gotten by the new algorithm is more efficient than the knowledge by other ID3 algorithms, the set of fuzzy knowledge is much smaller than that of knowledge by classical ID3 algorithms. On the other hand, fuzzy knowledge represents field data more naturally to the way of bar thinking and more robust in tolerating imprecise, conflicting and missing information
文摘This paper proposes a novel design paradigm for circuits designed in quantum dot cellular automata （QCA） technology. Previously reported QCA circuits in the literature have generally been designed in a single layer which is the main logical block in which the inverter and majority gate are on the base layer, except for the parts where multilayer wire crossing was used. In this paper the concept of multilayer wire crossing has been extended to design logic gates in multilayers. Using a 5-input majority gate in a multilayer, a 1-bit and 2-bit adder have been designed in the proposed multilayer gate design paradigm. A comparison has been made with some adders reported previously in the literature and it has been shown that circuits designed in the proposed design paradigm are much more efficient in terms of area, the requirement of QCA cells in the design and the input-output delay of the circuit. Over all, the availability of one additional spatial dimension makes the design process much more flexible and there is scope for the customizability of logic gate designs to make the circuit compact.
文摘In this study, it is aimed to determine the ranking importance levels of the stages to be taken into consideration for new product development on a global scale in the automotive design process. New product design activity and stage-gate process differences between local automotive firms (serial production factory and stage-gate department in Turkey) and global automotive companies (serial production factory and stage-gate department in Turkey) are examined comparatively in the research area. In the automotive industry, which has been developing for a century, the question of how the local company products operating in the last sixty years have not been able to spread globally or how to develop global products is the background question of the research. For this purpose, one on one interviews were held with the managers of 3 national and 3 international automotive companies, who worked in the same region and who had previously designed a new vehicle, with design and product development departments.?According to?the data obtained by the AHP (Analytic Hierarchy Process) in the automotive design process, the importance of the criteria that should be taken into account for global product development has revealed. According to the results of the study, it was found that design validation stages were the most important globalization criterion in automotive design process as a new study area. In the comprehensive survey of the study, no other publication has been encountered to measure or evaluate the stages in the automotive design and new product development process in other sectors, including the vehicle industry. As in every industry sector, in the automotive industry, with the new product companies provide market development or competitive advantage. The new product is the life channel of a company and in the realization of this new vehicle;the disciplines of the automotive industry are formed by a hundred years of experience.
基金supported by the National Natural Science Foundation of China(Nos.52074246,52275390,52375394)the National Defense Basic Scientific Research Program of China(No.JCKY2020408B002)the Key R&D Program of Shanxi Province(No.202102050201011).
文摘The design of casting gating system directly determines the solidification sequence,defect severity,and overall quality of the casting.A novel machine learning strategy was developed to design the counter pressure casting gating system of a large thin-walled cabin casting.A high-quality dataset was established through orthogonal experiments combined with design criteria for the gating system.Spearman’s correlation analysis was used to select high-quality features.The gating system dimensions were predicted using a gated recurrent unit(GRU)recurrent neural network and an elastic network model.Using EasyCast and ProCAST casting software,a comparative analysis of the flow field,temperature field,and solidification field can be conducted to demonstrate the achievement of steady filling and top-down sequential solidification.Compared to the empirical formula method,this method eliminates trial-and-error iterations,reduces porosity,reduces casting defect volume from 11.23 cubic centimeters to 2.23 cubic centimeters,eliminates internal casting defects through the incorporation of an internally cooled iron,fulfilling the goal of intelligent gating system design.
文摘This study aimed at designing and assembling an improvised Logic Gates Simulator that can be utilized as an instructional device in basic digital electronics instruction at Caraga State University Cabadbaran Campus, Philippines. This instructional device is believed to enhance the teaching-learning process and would also help address the scarcity of instructional equipment in the school and in the country. Descriptive method of research was employed to come up with the design of the simulator based on the course content of basic digital electronics subject. Acceptability of the improvised simulator based on standards set in this study was?gathered from the experts as respondents using a self-made questionnaire. The data were treated using average weighted mean utilizing parametric scales with verbal descriptions. Findings revealed that the improvised logic gates simulator is highly acceptable in terms of its cost and availability of components,?design and construction,operations, and troubleshooting features. It is concluded that the improvised logic gates simulator is at par in terms of standards on instructional devices based on the evaluation results of experts and is therefore recommended to be used in basic digital electronics instruction. The simulator is an innovative answer and an alternate solution to the scarcity of instructional materials and devices at Caraga State University Cabadbaran Campus.
文摘Reversible logic is a new emerging technology with many promising applications in optical information processing, low power (Complementary Metal Oxide Semiconductor) CMOS design, (De Oxy RiboNucleic Acid) DNA computing, etc. In industrial automation, comparators play an important role in segregating faulty patterns from good ones. In previous works, these comparators have been implemented with more number of reversible gates and computational complexity. All these comparators use propagation technique to compare the data. This will reduce the efficiency of the comparators. To overcome the problem, this paper proposes an efficient comparator using (Thapliyal Ranganathan) TR gate utilizing full subtraction and half subtraction algorithm which will improve the computation efficiency. The comparator design using half subtraction algorithm shows an improvement in terms of quantum cost. The comparator design using full subtraction algorithm shows effectiveness in reducing number of reversible gates required and garbage output.
文摘This paper addresses the challenges of System-on-Chip designs using High-Level Synthesis (HLS). HLS tools convert algorithms designed in C into hardware modules. This approach is a practical choice for developing complex applications. Nevertheless, certain hardware considerations are required when writing C applications for HLS tools. Hence, in order to demonstrate the fundamental hardware design concepts, a case studyis presented. Fast Fourier Transform (FFT) implementation in ANSI C is examined in order to explore the important design issues such as concurrency, data recurrences and memory accesses that need to be resolved before generating the hardware using HLS tools. There are additional language constraints that need to be addressed including use of pointers, recursion and floating point types.
文摘Epilepsy is described as the most common chronic brain disorder. A typical symptom of epilepsy results in uncontrolled convulsions caused by temporary excessive neuronal discharges. Although several new anticon-vulsants have been introduced, some types of seizures have still not been adequately controlled with these new and current therapies. There is an urgent need to develop new anticonvulsant drugs to control the many different types of seizures. Many studies have shown that the epilepsies involve more than one mechanism and therefore may be responsible for the various types of observed seizures. Recently reported studies have shown that a group of newly synthesized 6 Hz active anticonvulsant fluorinated N-benzamide enaminones exhibited selective inhibitions of voltage-gated sodium (Nav) channels. Nav channels are responsible for the initial inward currents during the depolarization phases of the action potential in excitable cells. The activation and opening of Nav channels result in the initial phases of action potentials. We hypothesize that there is an essential pharmacophore model for the interactions between these enaminones and the active sites of Nav channels. The research reported here is focused on molecular docking studies of the interactions that occur between the fluorinated N-benzamide enaminones and the Nav channels. These studies may open an avenue for designing anticonvulsant drugs by inhibiting Nav channels.
基金Project supported by the National Natural Science Foundation of China(Grant No.61376109)the Opening Project of National Key Laboratory of Science and Technology on Reliability Physics and Application Technology of Electrical Component,China(Grant No.ZHD201202)
文摘As integrated circuits scale down in size, a single high-energy ion strike often affects multiple adjacent logic nodes.The so-called single-event transient（SET） pulse quenching induced by single-event charge sharing collection has been widely studied. In this paper, SET pulse quenching enhancement is found in dummy gate isolated adjacent logic nodes compared with that isolated by the common shallow trench isolation（STI）. The physical mechanism is studied in depth and this isolation technique is explored for SET mitigation in combinational standard cells. Three-dimensional（3D） technology computer-aided design simulation（TCAD） results show that this technique can achieve efficient SET mitigation.
文摘在TFT-LCD驱动的关键设计技术中,抖动算法FRC(frame rate control)是一种重要的技术。它能够用6 bit source的输出来达到8 bit full color(16.7 M colors)的显示效果,这样可以降低数据传输率以降低功耗,同时可以节省源驱动(Source Driver,SD)芯片的面积。通过分析和实践,提出了针对用于平板电脑的Dual-Gate TFT-LCD屏和翻转方式,需要采用优化的FRC算法提高显示效果。在应用于平板电脑的dual-gate TFT-LCD屏的FRC方案中,分析了传统方案产生周期性竖线的原因,然后提出了改进方案,消除了竖线,提高了显示质量。最后,总结了FRC算法具体需要考虑的因素。
