To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the...To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the alloy across different planes were investigated.The anisotropy of SLM-fabricated Ti-6Al-4V alloys was analyzed,and the electron backscatter diffraction technique was used to investigate the influence of different grain types and orientations on the stress-strain distribution at various scales.Results reveal that in room-temperature compression tests at a strain rate of 10^(-3) s^(-1),both the compressive yield strength and microhardness vary along the deposition direction,indicating a certain degree of mechanical property anisotropy.The alloy exhibits a columnar microstructure;along the deposition direction,the grains appear equiaxed,and they have internal hexagonal close-packed(hcp)α/α'martensitic structure.α'phase has a preferential orientation approximately along the<0001>direction.Anisotropy arises from the high aspect ratio of columnar grains,along with the weak texture of the microstructure and low symmetry of the hcp crystal structure.展开更多
A multi-physics approach was used to quantify the effect of process parameters (laser power, scanning speed, hatch spacing, and scanning strategy) on the thermal history and corresponding microstructure evolution of T...A multi-physics approach was used to quantify the effect of process parameters (laser power, scanning speed, hatch spacing, and scanning strategy) on the thermal history and corresponding microstructure evolution of Ti-25Nb (at%) alloy during the dual-track selective laser melting (SLM) process. Simulation results reveal that during the dual-track SLM process, increasing laser power results in greater thermal accumulation, leading to a molten pool of larger volume and coarser grains. Reducing scanning speed enhances remelting and promotes cellular growth at the top of molten pool, whereas faster scanning speed leads to rougher melt tracks and finer grains. Notably, hatch spacing significantly influences the molten pool dimensions and microstructures, and smaller hatch spacing promotes remelting. Furthermore, the orientations of grains in the second track during zigzag scanning differ markedly from those in the first track. More importantly, compared with those after the first track, both the temperature gradient and cooling rate at the boundaries of remelting molten pool are reduced after the second track scanning, resulting in slower interface velocity and significant change in solidification microstructure. This research provides a theoretical foundation for controlling non-equilibrium microstructure and offering novel insights into the optimization of SLM process parameters of titanium alloys.展开更多
The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solutio...The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.展开更多
Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the deve...Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the development of melt crystallization is hampered by lacking solid–liquid equilibrium (SLE) data for some isomers.Therefore,the SLE data of both binary and ternary mixtures of 2,3-dimethylphenol (2,3-DMP),3,5-dimethylphenol (3,5-DMP),and 3,4-dimethylphenol (3,4-DMP) were determined by using differential scanning calorimetry in this work.Additionally,crystallographic analysis was conducted to investigate the thermodynamic characteristics of these mixtures.The experimental results indicated that all the systems investigated in this research exhibited eutectic behavior.The experimentally obtained SLE data were well correlated with the Wilson and non-random two-liquid models.The excess thermodynamic functions were calculated to analyze the types and intensities of the molecular interactions occurring in the mixtures.Furthermore,this study developed a model for the correlation between the theoretical crystallization yield and the actual cooling yield and final yield in melt crystallization.This study has furnished reliable data essential for developing and optimizing the melt crystallization process of mixtures of 2,3-DMP,3,5-DMP,and 3,4-DMP.展开更多
Selective laser melting(SLM)is an advanced additive manufacturing technique that enables the fabrication of complex metal components with high density,precision,and design flexibility.A novel Sc-free Al-4.58Mg-1.17Mn-...Selective laser melting(SLM)is an advanced additive manufacturing technique that enables the fabrication of complex metal components with high density,precision,and design flexibility.A novel Sc-free Al-4.58Mg-1.17Mn-1.59Zr-1.45Ti alloy was successfully fabricated via SLM,achieving a relative density of~99.89%.The microstructure of the as-fabricated alloy was characterized by scanning electron microscopy and transmission electron microscopy,which revealed refined equiaxed grains,a high density of low-angle grain boundaries and dislocation structures,as well as Mg segregation along grain boundaries.Additionally,a variety of dispersed precipitates were identified,including Mg-containing oxides,L1_(2)-Al_(3)(Ti_(x),Zr_(1−x)),and Al_(3)Zr particles.Room-temperature tensile tests showed that the alloy exhibits an excellent combination of strength and ductility,with a yield strength of 453.2±12 MPa,an ultimate tensile strength of 515.1±8 MPa,and an elongation of 22.5%±0.3%.The high strength was attributed to the combined effects of grain boundary strengthening,solid solution strengthening,precipitation strengthening,and dislocation strengthening.The developed Sc-free Al-Mg-Mn-Zr-Ti alloy demonstrates significant potential as an economical high-strength lightweight material for SLM-based manufacturing applications.展开更多
The corrosion wear behavior of the selective laser melting(SLM)and forged TC4 alloys in 3.5 wt.%NaCl solution is studied.Results indicate that the current densities of the two TC4 alloys increase with the increase in ...The corrosion wear behavior of the selective laser melting(SLM)and forged TC4 alloys in 3.5 wt.%NaCl solution is studied.Results indicate that the current densities of the two TC4 alloys increase with the increase in applied potential,meaning that the corrosion resistance of the alloys decreases.And the main product of the passive film is TiO_(2).What’s more,corrosion wear behavior is more severe due to the presence of corrosion,resulting in greater mass losses and deeper wear scars.To explore the interaction between corrosion and wear for the two TC4 alloys,the change of the mass loss proportions for wear caused by corrosion and corrosion caused by wear with potential is analyzed.The mass loss of wear caused by corrosion cannot be ignored,and it affects SLM TC4 alloy with the unique acicularα′-phase significantly.展开更多
Selective laser melting(SLM),as an additive manufacturing technology,has garnered widespread attention for its capability to fabricate components with complex geometries and to tailor the microstructure and mechanical...Selective laser melting(SLM),as an additive manufacturing technology,has garnered widespread attention for its capability to fabricate components with complex geometries and to tailor the microstructure and mechanical properties under specific conditions.However,the intrinsic influence mechanism of microstructure formation under non-equilibrium solidification conditions in SLM processes has not been clearly revealed.In the present work,the influence of Al concentration and process parameters on the microstructure forming mechanism of Al_(x)CoCrFeNi HEAs prepared by SLM is investigated by molecular dynamics simulation method.The simulation results show that the difference in Al content significantly affects the microstructure formation of HEAs,including the growth rate and morphology of columnar crystals,stress distribution at grain boundaries,and defect structure.In addition,the results show that increasing the substrate temperature improves the solidification formability,reduces microstructural defects,and helps reduce residual stress in Al_(x)CoCrFeNi HEAs.By analyzing the influence of heat and solute flow in the molten pool on the growth of columnar crystals,it is found that spatial fluctuations in Al concentration during the non-equilibrium solidification process inhibit the high cooling rates induced by steep temperature gradients.These findings promote the understanding of the forming mechanism of microstructure in HEAs prepared by SLM and provide theoretical guidance for designing high-performance SLM-fabricated HEAs.展开更多
Melt electrowriting(MEW) enables the precise deposition of polymeric fibers at micro-/nanoscale, allowing for the fabrication of 3D biomimetic scaffolds. By incorporating stimuli-responsive polymers and/or functional ...Melt electrowriting(MEW) enables the precise deposition of polymeric fibers at micro-/nanoscale, allowing for the fabrication of 3D biomimetic scaffolds. By incorporating stimuli-responsive polymers and/or functional fillers, MEW-based 4D printing creates scaffolds capable of undergoing controlled, reversible shape transformations in response to external stimuli over time. These dynamic 4D scaffolds can be tailored for minimally invasive delivery, remote actuation, and real-time responsiveness to physiological environments, making them highly relevant for biomedical applications. This review systematically elucidates the principles of MEW-based 4D printing, including material considerations, actuation methods, and structure design strategies, along with shape programming and morphing mechanisms. The versatility of MEW for rational fabrication of biomimetic scaffolds is firstly introduced. Subsequently, the critical elements underpinning MEW-based 4D printing process are overviewed, including an analysis of stimuli-responsive materials compatible with MEW, an evaluation of applicable external stimuli, and a discussion on the advancements in design strategies for 4D scaffolds. Recent progress of MEW 4D scaffolds for applications in tissue engineering, biomedical implants, and drug delivery systems are highlighted. Finally, key challenges and perspectives toward material innovation, fabrication optimization, and actuation control are discussed. This review aims to provide valuable insights for design and creation of multifunctional biomimetic dynamic scaffolds by MEW-based 4D printing.展开更多
The electric arc furnace(EAF)offers advantages in energy savings,environmental protection,and high efficiency by using scrap as the primary charge and utilizing a high-temperature electric arc as the main heat source ...The electric arc furnace(EAF)offers advantages in energy savings,environmental protection,and high efficiency by using scrap as the primary charge and utilizing a high-temperature electric arc as the main heat source for steel smelting.The improvement of EAF smelting efficiency is primarily influenced by three key factors:the heat transfer efficiency of the electric arc,the intensity of molten pool stirring,and the melting rate of scrap.The arc heat transfer efficiency determines the energy input efficiency and the maximum smelting temperature of the EAF.Molten pool stirring intensity plays a crucial role in ensuring uniformity in temperature,composition,and flow within the furnace,preventing the formation of dead zones.The scrap melting rate is a decisive factor in EAF smelting efficiency,largely governed by the coupling of heat and mass transfer.Thus,understanding not only the rapid melting mechanism of scrap but also the impact of arc heat transfer and molten pool stirring is essential to optimizing the smelting process.Advancing research in these areas is critical for shortening the EAF smelting cycle,reducing energy consumption,lowering costs,and improving resource utilization.Therefore,recent achievements and development trends in fundamental research on enhancing EAF smelting efficiency were summarized.展开更多
Selective Laser Melting(SLM),an advanced metal additive manufacturing technology,offers high precision and personalized customization advantages.However,selecting reasonable SLM parameters is challenging due to comple...Selective Laser Melting(SLM),an advanced metal additive manufacturing technology,offers high precision and personalized customization advantages.However,selecting reasonable SLM parameters is challenging due to complex relationships.This study proposes a method for identifying the optimal process window by combining the simulation model with an optimization algorithm.JAYA is guided by the principle of preferential behavior towards best solutions and avoidance of worst ones,but it is prone to premature convergence thus leading to insufficient global search.To overcome limitations,this research proposes a Differential Evolution-framed JAYA algorithm(DEJAYA).DEJAYA incorporates four key enhancements to improve the flexibility of the original algorithm,which include DE framework design,horizontal crossover operator,longitudinal crossover operator,and global greedy strategy.The effectiveness of DEJAYA is rigorously evaluated by a suite of 23 distinct benchmark functions.Furthermore,the numerical simulation establishes AlSi10Mg single-track formation models,and DEJAYA successfully identified the optimal process window for this problem.Experimental results validate that DEJAYA effectively guides SLM parameter selection for AlSi10Mg.展开更多
Background: This study focuses on the fabrication and optimization of Ti6Al4V alloy latticestructures produced by the Selective Laser Melting (SLM) process. Such structures areincreasingly used in biomedical implants ...Background: This study focuses on the fabrication and optimization of Ti6Al4V alloy latticestructures produced by the Selective Laser Melting (SLM) process. Such structures areincreasingly used in biomedical implants due to their potential to match the mechanicalproperties of human bone. Key features influencing their performance include porosity ratio,surface roughness, elastic modulus, and yield strength. Achieving a balance between theseparameters is essential for ensuring both mechanical integrity and biological compatibility.Methods: The Taguchi method integrated with Grey Relational Analysis (GRA) wasemployed to optimize the SLM process parameters—laser power (160-240 J), scanningspeed (1000-1500 mm/min), and hatch spacing (0.06-0.12 mm). The optimization aimed toproduce lattice structures with properties closely resembling human bone. Experimentaltrials were conducted to evaluate the effects of these parameters on porosity, surfaceroughness, elastic modulus, and yield strength, followed by statistical and relational analysisto determine the optimal configuration. Results: The results revealed that higher scanningspeed, wider hatch spacing, and lower laser power increased the porosity ratio compared toCAD models. A strong inverse relationship was observed between porosity and both yieldstrength and elastic modulus. Increasing laser power substantially reduced surfaceroughness. Through Taguchi-GRA optimization, the optimal parameter combination wasdetermined as laser power of 240 J, scanning speed of 1250 mm/min, and hatch spacing of0.06 mm. Under these conditions, the obtained values were: modulus of elasticity (0°) = 20GPa, modulus of elasticity (90°) = 18.874 GPa, yield strength (0°) = 265 MPa, yieldstrength (90°) = 260 MPa, porosity = 48.565%, and surface roughness = 6.223 μm.Conclusion: The optimized SLM parameters successfully produced Ti6Al4V latticestructures with mechanical and morphological characteristics compatible with human bone.The study highlights the critical balance between process parameters and structuralfeatures, providing a systematic approach for tailoring lattice structures for biomedicalapplications through Taguchi and GRA-based optimization.展开更多
Glacial meltwater constitutes a vital component of the water supply in arid and semi-arid areas.However,the influence of glacial melting on runoff and evapotranspiration under global warming remains insufficiently und...Glacial meltwater constitutes a vital component of the water supply in arid and semi-arid areas.However,the influence of glacial melting on runoff and evapotranspiration under global warming remains insufficiently understood.Previous studies coupling the Soil and Water Assessment Tool(SWAT)model with glacier modules often failed to consider the spatial heterogeneity of temperature during glacial melting,potentially leading to biased estimates of meltwater volume.In this study,we developed a glacier-coupled SWAT(SWAT-glacier)model considering the digital elevation model(DEM)based temperature-driven glacial melt processes to elucidate the impact of glacial melting on hydrological processes across four river basins(Dongda,Xiying,Jinta,and Zamu)of the upper Shiyang River Basin(SYRB)in northwestern China from 1986 to 2021.Compared with the standard SWAT model,the proposed SWAT-glacier model significantly improved the simulation accuracy for both runoff and evapotranspiration.Specifically,in comparison with the standard SWAT model,the Nash-Sutcliffe efficiency of the SWAT-glacier model showed a relative improvement of approximately 0.42%–9.16%and 1.50%–10.15%for runoff and evapotranspiration,respectively,in the four river basins during the validation period.Annual glacial runoff occurred predominantly from May to October,whereas glacial melt-induced evapotranspiration peaked between June and August.From 1986 to 2021,the average contributions of glacial melt to runoff were 6.97%for Dongda,3.06%for Xiying,2.70%for Jinta,and 0.67%for Zamu,whereas its contributions to evapotranspiration were 9.06%,5.14%,3.21%,and 1.59%,respectively.This study presents a SWAT-glacier modeling framework that enhances the simulation of hydrological processes in cold regions.The proposed methodology can be extended to other glacierized basins to provide valuable insights into water resource management under climate change.展开更多
Incorporating ceramic particles into metal matrices is a proven strategy for boosting mechanical properties and wear resistance.The reinforcement potential of tungsten carbide(WC)particles in 316L stainless steel is r...Incorporating ceramic particles into metal matrices is a proven strategy for boosting mechanical properties and wear resistance.The reinforcement potential of tungsten carbide(WC)particles in 316L stainless steel is revealed,utilizing selective laser melting(SLM)to fabricate composites with 5 and 10 vol.%WC.The WC incorporation markedly alters the composite’s microstructure and mechanical attributes.Notably,5 vol.%WC-316L composite exhibits a refined submicron cellular structure,averaging 0.67μm in grain size.Elemental diffusion at WC-316L interface formed a 0.8μm gradient transition layer enriched with M_(2)C carbides(Fe,Cr,W),ensuring robust metallurgical bonding.Compared with unreinforced 316L,5%WC composite exhibits a 70%increase in tensile strength,reaching 1012.6 MPa,and a 25.3%rise in hardness,while maintaining acceptable ductility.10%WC composite achieves a 70.8%hardness enhancement,albeit with reduced elongation.Friction coefficient is reduced by up to 17.3%,and the wear mechanism shifts from adhesive to abrasive,significantly improving wear resistance.展开更多
Strong and ductile Al alloys and their suitable design strategy have long been desired in selective laser melting(SLM).This work reports a non-equilibrium partitioning model and a correspondingly designed Al–7.5Mg–0...Strong and ductile Al alloys and their suitable design strategy have long been desired in selective laser melting(SLM).This work reports a non-equilibrium partitioning model and a correspondingly designed Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy.This model effectively quantifies the influence of Mg and Si on hot cracking in aluminum alloy by considering the non-equilibrium partitioning under high cooling rates in SLM.The designed Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy exhibits no hot cracks and achieves a remarkably enhanced strength–ductility synergy(a yield strength of(412±8)MPa and a uniform elongation of(15.6±0.6)%),superior to previously reported Al–Mg–Sc–Zr and Al–Mn alloys.A tensile cracking model is proposed to explore the origin of the improved ductility.Both the non-equilibrium partitioning model and the novel Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy offers a promising opportunity for producing highly reliable aluminum parts through SLM.展开更多
To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by...To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.展开更多
Selective laser melting(SLM)is a cost-effective 3 D metal additive manufacturing(AM)process.However,AM 316 L stainless steel(SS)has different surface and microstructure properties as compared to conventional ones.Bori...Selective laser melting(SLM)is a cost-effective 3 D metal additive manufacturing(AM)process.However,AM 316 L stainless steel(SS)has different surface and microstructure properties as compared to conventional ones.Boriding process is one of the ways to modify and increase the surface properties.The aim of this study is to predict and understand the growth kinetic of iron boride layers on AM 316 L SS.In this study,the growth kinetic mechanism was evaluated for AM 316 L SS.Pack boriding was applied at 850,900 and 950℃,each for 2,4 and 6 h.The thickness of the boride layers ranged from(1.8±0.3)μm to(27.7±2.2)μm.A diffusion model based on error function solutions in Fick’s second law was proposed to quantitatively predict and elucidate the growth rate of FeB and Fe_(2)B phase layers.The activation energy(Q)values for boron diffusion in FeB layer,Fe_(2)B layer,and dual FeB+Fe_(2)B layer were found to be 256.56,161.61 and 209.014 kJ/mol,respectively,which were higher than the conventional 316 L SS.The findings might provide and open new directions and approaches for applications of additively manufactured steels.展开更多
The melting of seasonal sea ice in Antarctica plays a pivotal role in the region’s carbon cycle,influencing global carbon storage and the exchange of carbon between the atmosphere and the ocean.However,the impact of ...The melting of seasonal sea ice in Antarctica plays a pivotal role in the region’s carbon cycle,influencing global carbon storage and the exchange of carbon between the atmosphere and the ocean.However,the impact of variability in the timing of seasonal sea ice retreat on the flux and composition of sinking particulate matter remains to be elucidated.In this study,we deployed sediment traps in Prydz Bay during the austral summers of 2019/2020 and 2020/2021,noting that sea ice melting occurred approximately one and a half months earlier in the former summer compared to the latter.We analyzed sediment trap data,which included total mass flux(TMF),particulate organic carbon(POC),biogenic silica(BSi),particulate inorganic carbon,and lithogenic particle(Litho)fluxes,as well as the stable isotopesδ^(13)C andδ^(15)N of particulate organic matter(POM).Additionally,we incorporated remote sensing data on sea ice concentration and chlorophyll a.This dramatic delay in sea ice melting timing could result in a significant increase in TMF,BSi and POC fluxes in the summer of 2020/2021 compared to 2019/2020.Elevated BSi fluxes and more ^(13)C-depleted POC in the austral summer of 2020/2021 suggest that the delayed melting of sea ice may have stimulated the productivity of centric diatoms.Furthermore,the higher BSi/POC ratio and more negativeδ^(15)N values of POM,along with a reduced presence of krill in the traps,indicate a diminished grazing pressure from zooplankton,which collectively enhanced the sedimentation efficiency of POC during the austral summer of 2020/2021.These findings highlight the critical role of sea ice melting timing in regulating productivity,flux and composition of sinking particulate matter in the Prydz Bay ecosystem,with significant implications for carbon cycling in polar oceans.展开更多
To clarify the densification behavior,deformation response and strengthening mechanisms of selective laser melted(SLM)Mg-RE alloys,this study systematically investigates a representative WE43 alloy via advanced materi...To clarify the densification behavior,deformation response and strengthening mechanisms of selective laser melted(SLM)Mg-RE alloys,this study systematically investigates a representative WE43 alloy via advanced material characterization techniques.A suitable laser output mode fell into the transition mode,allowing for the fabrication of nearly full-density samples(porosity=0.85±0.021%)with favorable mechanical properties(yield strength=351 MPa,ultimate tensile strength=417 MPa,the elongation at break=6.5%and microhardness=137.9±6.15 HV_(0.1))using optimal processing parameters(P=80 W,v=250 mm/s and d=50μm).Viscoplastic self-consistent analysis and transmission electron microscopy observations reveal that the plastic deformation response of the SLM Mg-RE alloys is primarily driven by basal and prismatic slips.Starting from a random texture before deformation(maximum multiple of ultimate density,Max.MUD=3.95),plastic stretching led the grains to align with the Z-axis,finally resulting in a{0001}<1010>texture orientation after fracture(Max.MUD=8.755).Main phases of the SLM state are mainly composed ofα-Mg,Mg_(24)Y_(5) andβ'-Mg_(41)Nd_(5),with an average grain size of only 4.27μm(about a quarter of that in the extruded state),resulting in a favorable strength-toughness ratio.Except for the nano-β'phase and semi-coherent Mg_(24)Y_(5) phase(mismatch=16.12%)around the grain boundaries,a small amount of nano-ZrO_(2) and Y_(2)O_(3) particles also play a role in dispersion strengthening.The high mechanical properties of the SLM state are chiefly attributed to precipitation hardening(44.41%),solid solution strengthening(34.06%)and grain boundary strengthening(21.53%),with precipitation hardening being predominantly driven by dislocation strengthening(67.77%).High-performance SLM Mg-RE alloy components were manufactured and showcased at TCT Asia 2024,receiving favorable attention.This work underscores the significant application potential of SLM Mg-RE alloys and establishes a strong foundation for advancing their use in the biomedical fields.展开更多
A key component of future lunar missions is the concept of in-situ resource utilization(ISRU),which involves the use of local resources to support human missions and reduce dependence on Earth-based supplies.This pape...A key component of future lunar missions is the concept of in-situ resource utilization(ISRU),which involves the use of local resources to support human missions and reduce dependence on Earth-based supplies.This paper investigates the thermal processing capability of lunar regolith without the addition of binders,with a focus on large-scale applications for the construction of lunar habitats and infrastructure.The study used a simulant of lunar regolith found on the Schr?dinger Basin in the South Pole region.This regolith simulant consists of20 wt%basalt and 80 wt%anorthosite.Experiments were conducted using a high power CO_(2)laser to sinter and melt the regolith in a 80 mm diameter laser spot to evaluate the effectiveness of direct large area thermal processing.Results indicated that sintering begins at approximately 1180℃and reaches full melt at temperatures above 1360℃.Sintering experiments with this material revealed the formation of dense samples up to 11 mm thick,while melting experiments successfully produced larger samples by overlapping molten layers and additive manufacturing up to 50 mm thick.The energy efficiency of the sintering and melting processes was compared.The melting process was about 10 times more energy efficient than sintering in terms of material consolidation,demonstrating the promising potential of laser melting technologies of anorthosite-rich regolith for the production of structural elements.展开更多
基金National Natural Science Foundation of China(51504138,51674118,52271177)Hunan Provincial Natural Science Foundation of China(2023JJ50181)Supported by State Key Laboratory of Materials Processing and Die&Mould Technology,Huazhong University of Science and Technology(P2024-022)。
文摘To explore the formation mechanism of anisotropy in Ti-6Al-4V alloy fabricated by selective laser melting(SLM),the compressive mechanical properties,microhardness,microstructure,and crystallographic orientation of the alloy across different planes were investigated.The anisotropy of SLM-fabricated Ti-6Al-4V alloys was analyzed,and the electron backscatter diffraction technique was used to investigate the influence of different grain types and orientations on the stress-strain distribution at various scales.Results reveal that in room-temperature compression tests at a strain rate of 10^(-3) s^(-1),both the compressive yield strength and microhardness vary along the deposition direction,indicating a certain degree of mechanical property anisotropy.The alloy exhibits a columnar microstructure;along the deposition direction,the grains appear equiaxed,and they have internal hexagonal close-packed(hcp)α/α'martensitic structure.α'phase has a preferential orientation approximately along the<0001>direction.Anisotropy arises from the high aspect ratio of columnar grains,along with the weak texture of the microstructure and low symmetry of the hcp crystal structure.
基金Guangdong Basic and Applied Basic Research Foundation (2024A1515011873)Shenzhen Basic Research Project (JCYJ20241202123504007)Shenzhen Science and Technology Innovation Commission (KJZD20240903101400001, KJZD20240903102006009)。
文摘A multi-physics approach was used to quantify the effect of process parameters (laser power, scanning speed, hatch spacing, and scanning strategy) on the thermal history and corresponding microstructure evolution of Ti-25Nb (at%) alloy during the dual-track selective laser melting (SLM) process. Simulation results reveal that during the dual-track SLM process, increasing laser power results in greater thermal accumulation, leading to a molten pool of larger volume and coarser grains. Reducing scanning speed enhances remelting and promotes cellular growth at the top of molten pool, whereas faster scanning speed leads to rougher melt tracks and finer grains. Notably, hatch spacing significantly influences the molten pool dimensions and microstructures, and smaller hatch spacing promotes remelting. Furthermore, the orientations of grains in the second track during zigzag scanning differ markedly from those in the first track. More importantly, compared with those after the first track, both the temperature gradient and cooling rate at the boundaries of remelting molten pool are reduced after the second track scanning, resulting in slower interface velocity and significant change in solidification microstructure. This research provides a theoretical foundation for controlling non-equilibrium microstructure and offering novel insights into the optimization of SLM process parameters of titanium alloys.
基金Tianjin Municipal Natural Science Foundation(23JCYBJC00040)National Natural Science Foundation of China(52175369)。
文摘The TiB+TiC dual-reinforced B_(4)C/TC4 composite was in-situ fabricated via incorporating 0.5wt%B_(4)C reinforcement during the laser melting deposition process.Different heat treatments of annealing and solid solution were used to regulate the microstructure,mechanical properties,and corrosion properties of B_(4)C/TC4 composite.Results show that with the increase in temperature from 500℃to 800°C,partial lamellarα-Ti in the as-deposited sample is gradually transformed into equiaxedα-Ti,accompanied by the disappearance of basketweave microstructure.At 1100°C,a small portion of TiC phase suffers fusion.This composite exhibits the optimal combination of strength and plasticity after annealing at 500℃for 4 h followed by furnace cooling,which is attributed to the stress release effect and the refined basketweave microstructure.However,this composite shows a decline in corrosion resistance after various heat treatments due to grain coarsening and micro-galvanic corrosion.
基金funded by the National Natural Science Foundation of China(22308358,22208346,22421003)IPE Project for Frontier Basic Research(QYJC-2023-05)CAS Project for Young Scientists in Basic Research(YSBR-038).
文摘Dimethylphenols serve as important intermediates in synthesizing pharmaceuticals and agrochemicals,yet traditional distillation struggles to separate their isomers due to minimal boiling point differences,and the development of melt crystallization is hampered by lacking solid–liquid equilibrium (SLE) data for some isomers.Therefore,the SLE data of both binary and ternary mixtures of 2,3-dimethylphenol (2,3-DMP),3,5-dimethylphenol (3,5-DMP),and 3,4-dimethylphenol (3,4-DMP) were determined by using differential scanning calorimetry in this work.Additionally,crystallographic analysis was conducted to investigate the thermodynamic characteristics of these mixtures.The experimental results indicated that all the systems investigated in this research exhibited eutectic behavior.The experimentally obtained SLE data were well correlated with the Wilson and non-random two-liquid models.The excess thermodynamic functions were calculated to analyze the types and intensities of the molecular interactions occurring in the mixtures.Furthermore,this study developed a model for the correlation between the theoretical crystallization yield and the actual cooling yield and final yield in melt crystallization.This study has furnished reliable data essential for developing and optimizing the melt crystallization process of mixtures of 2,3-DMP,3,5-DMP,and 3,4-DMP.
基金supported by the Jilin Scientific and Technological Development Program(No.20240302108GX)the National Natural Science Foundation of China(Nos.51974032,52174355,51874043,and 51604034).
文摘Selective laser melting(SLM)is an advanced additive manufacturing technique that enables the fabrication of complex metal components with high density,precision,and design flexibility.A novel Sc-free Al-4.58Mg-1.17Mn-1.59Zr-1.45Ti alloy was successfully fabricated via SLM,achieving a relative density of~99.89%.The microstructure of the as-fabricated alloy was characterized by scanning electron microscopy and transmission electron microscopy,which revealed refined equiaxed grains,a high density of low-angle grain boundaries and dislocation structures,as well as Mg segregation along grain boundaries.Additionally,a variety of dispersed precipitates were identified,including Mg-containing oxides,L1_(2)-Al_(3)(Ti_(x),Zr_(1−x)),and Al_(3)Zr particles.Room-temperature tensile tests showed that the alloy exhibits an excellent combination of strength and ductility,with a yield strength of 453.2±12 MPa,an ultimate tensile strength of 515.1±8 MPa,and an elongation of 22.5%±0.3%.The high strength was attributed to the combined effects of grain boundary strengthening,solid solution strengthening,precipitation strengthening,and dislocation strengthening.The developed Sc-free Al-Mg-Mn-Zr-Ti alloy demonstrates significant potential as an economical high-strength lightweight material for SLM-based manufacturing applications.
基金supported by the National Natural Science Foundation of China(No.52001142)Young Elite Scientists Sponsorship Program by CAST(No.2022QNRC001).
文摘The corrosion wear behavior of the selective laser melting(SLM)and forged TC4 alloys in 3.5 wt.%NaCl solution is studied.Results indicate that the current densities of the two TC4 alloys increase with the increase in applied potential,meaning that the corrosion resistance of the alloys decreases.And the main product of the passive film is TiO_(2).What’s more,corrosion wear behavior is more severe due to the presence of corrosion,resulting in greater mass losses and deeper wear scars.To explore the interaction between corrosion and wear for the two TC4 alloys,the change of the mass loss proportions for wear caused by corrosion and corrosion caused by wear with potential is analyzed.The mass loss of wear caused by corrosion cannot be ignored,and it affects SLM TC4 alloy with the unique acicularα′-phase significantly.
基金supported by the National Natural Science Foundation of China(Grant No.12102133).
文摘Selective laser melting(SLM),as an additive manufacturing technology,has garnered widespread attention for its capability to fabricate components with complex geometries and to tailor the microstructure and mechanical properties under specific conditions.However,the intrinsic influence mechanism of microstructure formation under non-equilibrium solidification conditions in SLM processes has not been clearly revealed.In the present work,the influence of Al concentration and process parameters on the microstructure forming mechanism of Al_(x)CoCrFeNi HEAs prepared by SLM is investigated by molecular dynamics simulation method.The simulation results show that the difference in Al content significantly affects the microstructure formation of HEAs,including the growth rate and morphology of columnar crystals,stress distribution at grain boundaries,and defect structure.In addition,the results show that increasing the substrate temperature improves the solidification formability,reduces microstructural defects,and helps reduce residual stress in Al_(x)CoCrFeNi HEAs.By analyzing the influence of heat and solute flow in the molten pool on the growth of columnar crystals,it is found that spatial fluctuations in Al concentration during the non-equilibrium solidification process inhibit the high cooling rates induced by steep temperature gradients.These findings promote the understanding of the forming mechanism of microstructure in HEAs prepared by SLM and provide theoretical guidance for designing high-performance SLM-fabricated HEAs.
基金financially supported by the National Natural Science Foundation of China (Grant No. 1230242212572342)+2 种基金Marie Sklodowska-Curie grant agreement ENSIGN (101086226)Nano Ram (101120146)L4DNANO (101086227)
文摘Melt electrowriting(MEW) enables the precise deposition of polymeric fibers at micro-/nanoscale, allowing for the fabrication of 3D biomimetic scaffolds. By incorporating stimuli-responsive polymers and/or functional fillers, MEW-based 4D printing creates scaffolds capable of undergoing controlled, reversible shape transformations in response to external stimuli over time. These dynamic 4D scaffolds can be tailored for minimally invasive delivery, remote actuation, and real-time responsiveness to physiological environments, making them highly relevant for biomedical applications. This review systematically elucidates the principles of MEW-based 4D printing, including material considerations, actuation methods, and structure design strategies, along with shape programming and morphing mechanisms. The versatility of MEW for rational fabrication of biomimetic scaffolds is firstly introduced. Subsequently, the critical elements underpinning MEW-based 4D printing process are overviewed, including an analysis of stimuli-responsive materials compatible with MEW, an evaluation of applicable external stimuli, and a discussion on the advancements in design strategies for 4D scaffolds. Recent progress of MEW 4D scaffolds for applications in tissue engineering, biomedical implants, and drug delivery systems are highlighted. Finally, key challenges and perspectives toward material innovation, fabrication optimization, and actuation control are discussed. This review aims to provide valuable insights for design and creation of multifunctional biomimetic dynamic scaffolds by MEW-based 4D printing.
基金supported by National Key R&D Program of China(Grant No.2022YFC3901403)China Baowu Low Carbon Metallurgy Innovation Foundation(Grant No.BWLCF202211)Program of Introducing Talents of Discipline to Universities(Grant No.B21001).
文摘The electric arc furnace(EAF)offers advantages in energy savings,environmental protection,and high efficiency by using scrap as the primary charge and utilizing a high-temperature electric arc as the main heat source for steel smelting.The improvement of EAF smelting efficiency is primarily influenced by three key factors:the heat transfer efficiency of the electric arc,the intensity of molten pool stirring,and the melting rate of scrap.The arc heat transfer efficiency determines the energy input efficiency and the maximum smelting temperature of the EAF.Molten pool stirring intensity plays a crucial role in ensuring uniformity in temperature,composition,and flow within the furnace,preventing the formation of dead zones.The scrap melting rate is a decisive factor in EAF smelting efficiency,largely governed by the coupling of heat and mass transfer.Thus,understanding not only the rapid melting mechanism of scrap but also the impact of arc heat transfer and molten pool stirring is essential to optimizing the smelting process.Advancing research in these areas is critical for shortening the EAF smelting cycle,reducing energy consumption,lowering costs,and improving resource utilization.Therefore,recent achievements and development trends in fundamental research on enhancing EAF smelting efficiency were summarized.
文摘Selective Laser Melting(SLM),an advanced metal additive manufacturing technology,offers high precision and personalized customization advantages.However,selecting reasonable SLM parameters is challenging due to complex relationships.This study proposes a method for identifying the optimal process window by combining the simulation model with an optimization algorithm.JAYA is guided by the principle of preferential behavior towards best solutions and avoidance of worst ones,but it is prone to premature convergence thus leading to insufficient global search.To overcome limitations,this research proposes a Differential Evolution-framed JAYA algorithm(DEJAYA).DEJAYA incorporates four key enhancements to improve the flexibility of the original algorithm,which include DE framework design,horizontal crossover operator,longitudinal crossover operator,and global greedy strategy.The effectiveness of DEJAYA is rigorously evaluated by a suite of 23 distinct benchmark functions.Furthermore,the numerical simulation establishes AlSi10Mg single-track formation models,and DEJAYA successfully identified the optimal process window for this problem.Experimental results validate that DEJAYA effectively guides SLM parameter selection for AlSi10Mg.
文摘Background: This study focuses on the fabrication and optimization of Ti6Al4V alloy latticestructures produced by the Selective Laser Melting (SLM) process. Such structures areincreasingly used in biomedical implants due to their potential to match the mechanicalproperties of human bone. Key features influencing their performance include porosity ratio,surface roughness, elastic modulus, and yield strength. Achieving a balance between theseparameters is essential for ensuring both mechanical integrity and biological compatibility.Methods: The Taguchi method integrated with Grey Relational Analysis (GRA) wasemployed to optimize the SLM process parameters—laser power (160-240 J), scanningspeed (1000-1500 mm/min), and hatch spacing (0.06-0.12 mm). The optimization aimed toproduce lattice structures with properties closely resembling human bone. Experimentaltrials were conducted to evaluate the effects of these parameters on porosity, surfaceroughness, elastic modulus, and yield strength, followed by statistical and relational analysisto determine the optimal configuration. Results: The results revealed that higher scanningspeed, wider hatch spacing, and lower laser power increased the porosity ratio compared toCAD models. A strong inverse relationship was observed between porosity and both yieldstrength and elastic modulus. Increasing laser power substantially reduced surfaceroughness. Through Taguchi-GRA optimization, the optimal parameter combination wasdetermined as laser power of 240 J, scanning speed of 1250 mm/min, and hatch spacing of0.06 mm. Under these conditions, the obtained values were: modulus of elasticity (0°) = 20GPa, modulus of elasticity (90°) = 18.874 GPa, yield strength (0°) = 265 MPa, yieldstrength (90°) = 260 MPa, porosity = 48.565%, and surface roughness = 6.223 μm.Conclusion: The optimized SLM parameters successfully produced Ti6Al4V latticestructures with mechanical and morphological characteristics compatible with human bone.The study highlights the critical balance between process parameters and structuralfeatures, providing a systematic approach for tailoring lattice structures for biomedicalapplications through Taguchi and GRA-based optimization.
基金supported by the National Key Research and Development Program of China(2022YFD1900501)the Gansu Provincial Water Conservancy Scientific Experimental Research and Technology Extension Project(25GSLK044,26GSLK093).
文摘Glacial meltwater constitutes a vital component of the water supply in arid and semi-arid areas.However,the influence of glacial melting on runoff and evapotranspiration under global warming remains insufficiently understood.Previous studies coupling the Soil and Water Assessment Tool(SWAT)model with glacier modules often failed to consider the spatial heterogeneity of temperature during glacial melting,potentially leading to biased estimates of meltwater volume.In this study,we developed a glacier-coupled SWAT(SWAT-glacier)model considering the digital elevation model(DEM)based temperature-driven glacial melt processes to elucidate the impact of glacial melting on hydrological processes across four river basins(Dongda,Xiying,Jinta,and Zamu)of the upper Shiyang River Basin(SYRB)in northwestern China from 1986 to 2021.Compared with the standard SWAT model,the proposed SWAT-glacier model significantly improved the simulation accuracy for both runoff and evapotranspiration.Specifically,in comparison with the standard SWAT model,the Nash-Sutcliffe efficiency of the SWAT-glacier model showed a relative improvement of approximately 0.42%–9.16%and 1.50%–10.15%for runoff and evapotranspiration,respectively,in the four river basins during the validation period.Annual glacial runoff occurred predominantly from May to October,whereas glacial melt-induced evapotranspiration peaked between June and August.From 1986 to 2021,the average contributions of glacial melt to runoff were 6.97%for Dongda,3.06%for Xiying,2.70%for Jinta,and 0.67%for Zamu,whereas its contributions to evapotranspiration were 9.06%,5.14%,3.21%,and 1.59%,respectively.This study presents a SWAT-glacier modeling framework that enhances the simulation of hydrological processes in cold regions.The proposed methodology can be extended to other glacierized basins to provide valuable insights into water resource management under climate change.
基金supported by Opening funding of National Key Laboratory of Aerospace Liquid Propulsion(HTKJ2024KL011004)Aeronautical Science Fund of China(ASFC-20240042070001)+2 种基金Opening funding of State Key Laboratory of Metal Forming Technology and Heavy Equipment(B2408100.W05)National Key R&D Program of China(2022YFB4601804)National Natural Science Foundation of China(52250287,52275375).
文摘Incorporating ceramic particles into metal matrices is a proven strategy for boosting mechanical properties and wear resistance.The reinforcement potential of tungsten carbide(WC)particles in 316L stainless steel is revealed,utilizing selective laser melting(SLM)to fabricate composites with 5 and 10 vol.%WC.The WC incorporation markedly alters the composite’s microstructure and mechanical attributes.Notably,5 vol.%WC-316L composite exhibits a refined submicron cellular structure,averaging 0.67μm in grain size.Elemental diffusion at WC-316L interface formed a 0.8μm gradient transition layer enriched with M_(2)C carbides(Fe,Cr,W),ensuring robust metallurgical bonding.Compared with unreinforced 316L,5%WC composite exhibits a 70%increase in tensile strength,reaching 1012.6 MPa,and a 25.3%rise in hardness,while maintaining acceptable ductility.10%WC composite achieves a 70.8%hardness enhancement,albeit with reduced elongation.Friction coefficient is reduced by up to 17.3%,and the wear mechanism shifts from adhesive to abrasive,significantly improving wear resistance.
基金financially supported by the National Natural Science Foundation of China(No.52071321)the Science Foundation of Anhui,China(No.2108085QE189)+2 种基金the Major Research Development Program of Wuhu,China(Nos.2023yf107 and 2023yf063)the Major Projects of Anhui Provincial Department of Education,China(Nos.2022AH050956 and 2022AH050974)the Start-up funding of Anhui Polytechnic University,China(No.2022YQQ006)。
文摘Strong and ductile Al alloys and their suitable design strategy have long been desired in selective laser melting(SLM).This work reports a non-equilibrium partitioning model and a correspondingly designed Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy.This model effectively quantifies the influence of Mg and Si on hot cracking in aluminum alloy by considering the non-equilibrium partitioning under high cooling rates in SLM.The designed Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy exhibits no hot cracks and achieves a remarkably enhanced strength–ductility synergy(a yield strength of(412±8)MPa and a uniform elongation of(15.6±0.6)%),superior to previously reported Al–Mg–Sc–Zr and Al–Mn alloys.A tensile cracking model is proposed to explore the origin of the improved ductility.Both the non-equilibrium partitioning model and the novel Al–7.5Mg–0.5Sc–0.3Zr–0.6Si alloy offers a promising opportunity for producing highly reliable aluminum parts through SLM.
基金supported by the Tianjin Municipal Natural Science Foundation(No.23JCYBJC00040)the National Nat-ural Science Foundation of China(No.52175369)the Tian-jin Research Innovation Project for Postgraduate Students(No.2022SKY134).
文摘To enhance the anti-corrosion performance of TC4 alloy across a wide temperature range for modern aircrafts operating in increasingly harsh environments, the (TiB+TiC) hybrid reinforced TC4 composites were prepared by laser melting deposition (LMD) via the in-situ reaction between B_(4)C reinforcement and molten TC4 alloy. The effect of B_(4)C content (0, 0.5, 1.5, wt%) on the microstructure and room/high-temperature corrosion behaviour of the composites was investigated. Microstructural analysis revealed that the microstructure of the composites was significantly influenced by the B_(4)C content. The composite containing 0.5 wt% B_(4)C exhibited an optimal microstructure characterized by refined grains, equiaxed α-Ti transformed from lath-shaped α-Ti, well-distributed (TiB+TiC) phases with a proper amount and reduced pore/dislocation defects. This composite also demonstrated the best corrosion resistance at both room temperature (25 ℃) and high temperature (800 ℃), which was primarily attributed to its comprehensive advantages including a favorable microstructure, a uniform dispersion of thermally stable (TiB+TiC) phases and a stable passivation film.
文摘Selective laser melting(SLM)is a cost-effective 3 D metal additive manufacturing(AM)process.However,AM 316 L stainless steel(SS)has different surface and microstructure properties as compared to conventional ones.Boriding process is one of the ways to modify and increase the surface properties.The aim of this study is to predict and understand the growth kinetic of iron boride layers on AM 316 L SS.In this study,the growth kinetic mechanism was evaluated for AM 316 L SS.Pack boriding was applied at 850,900 and 950℃,each for 2,4 and 6 h.The thickness of the boride layers ranged from(1.8±0.3)μm to(27.7±2.2)μm.A diffusion model based on error function solutions in Fick’s second law was proposed to quantitatively predict and elucidate the growth rate of FeB and Fe_(2)B phase layers.The activation energy(Q)values for boron diffusion in FeB layer,Fe_(2)B layer,and dual FeB+Fe_(2)B layer were found to be 256.56,161.61 and 209.014 kJ/mol,respectively,which were higher than the conventional 316 L SS.The findings might provide and open new directions and approaches for applications of additively manufactured steels.
基金The National Key Research and Development Program of China under contract No.2022YFE0136500the Scientific Research Fund of the Second Institute of Oceanography,Ministry of Natural Resources,under contract Nos JG2212 and JG2211+2 种基金the National Natural Science Foundation of China under contract Nos 42276255,41976228,and 42176227the National Polar Special Program“Impact and Response of Antarctic Seas to Climate Change”under contract Nos IRASCC 01-01-02 and IRASCC 02-02the China Scholarship Council under contract No.201704180017.
文摘The melting of seasonal sea ice in Antarctica plays a pivotal role in the region’s carbon cycle,influencing global carbon storage and the exchange of carbon between the atmosphere and the ocean.However,the impact of variability in the timing of seasonal sea ice retreat on the flux and composition of sinking particulate matter remains to be elucidated.In this study,we deployed sediment traps in Prydz Bay during the austral summers of 2019/2020 and 2020/2021,noting that sea ice melting occurred approximately one and a half months earlier in the former summer compared to the latter.We analyzed sediment trap data,which included total mass flux(TMF),particulate organic carbon(POC),biogenic silica(BSi),particulate inorganic carbon,and lithogenic particle(Litho)fluxes,as well as the stable isotopesδ^(13)C andδ^(15)N of particulate organic matter(POM).Additionally,we incorporated remote sensing data on sea ice concentration and chlorophyll a.This dramatic delay in sea ice melting timing could result in a significant increase in TMF,BSi and POC fluxes in the summer of 2020/2021 compared to 2019/2020.Elevated BSi fluxes and more ^(13)C-depleted POC in the austral summer of 2020/2021 suggest that the delayed melting of sea ice may have stimulated the productivity of centric diatoms.Furthermore,the higher BSi/POC ratio and more negativeδ^(15)N values of POM,along with a reduced presence of krill in the traps,indicate a diminished grazing pressure from zooplankton,which collectively enhanced the sedimentation efficiency of POC during the austral summer of 2020/2021.These findings highlight the critical role of sea ice melting timing in regulating productivity,flux and composition of sinking particulate matter in the Prydz Bay ecosystem,with significant implications for carbon cycling in polar oceans.
基金supported by the National Key Research and Development Program of China(No.2022YFC2406000)the Guangdong Basic and Applied Basic Research Foundation(2024A1515011024)+5 种基金the Guangzhou Science and Technology Project(2024A04J4943)the Guangdong Academy of Sciences Development Special Fund Project(2022GDASZH-2022010107)the Guangdong province Science and Technology Plan Projects(2023B1212120008,2023B1212060045)the GDAS Projects of International cooperation platform of Science and Technology(2022GDASZH-2022010203-003)Special Support Foundation of Guangdong Province(2023TQ07Z559)Shenzhen Basic Research Project(JCYJ20210324120001003 and JCYJ20220531091802006)。
文摘To clarify the densification behavior,deformation response and strengthening mechanisms of selective laser melted(SLM)Mg-RE alloys,this study systematically investigates a representative WE43 alloy via advanced material characterization techniques.A suitable laser output mode fell into the transition mode,allowing for the fabrication of nearly full-density samples(porosity=0.85±0.021%)with favorable mechanical properties(yield strength=351 MPa,ultimate tensile strength=417 MPa,the elongation at break=6.5%and microhardness=137.9±6.15 HV_(0.1))using optimal processing parameters(P=80 W,v=250 mm/s and d=50μm).Viscoplastic self-consistent analysis and transmission electron microscopy observations reveal that the plastic deformation response of the SLM Mg-RE alloys is primarily driven by basal and prismatic slips.Starting from a random texture before deformation(maximum multiple of ultimate density,Max.MUD=3.95),plastic stretching led the grains to align with the Z-axis,finally resulting in a{0001}<1010>texture orientation after fracture(Max.MUD=8.755).Main phases of the SLM state are mainly composed ofα-Mg,Mg_(24)Y_(5) andβ'-Mg_(41)Nd_(5),with an average grain size of only 4.27μm(about a quarter of that in the extruded state),resulting in a favorable strength-toughness ratio.Except for the nano-β'phase and semi-coherent Mg_(24)Y_(5) phase(mismatch=16.12%)around the grain boundaries,a small amount of nano-ZrO_(2) and Y_(2)O_(3) particles also play a role in dispersion strengthening.The high mechanical properties of the SLM state are chiefly attributed to precipitation hardening(44.41%),solid solution strengthening(34.06%)and grain boundary strengthening(21.53%),with precipitation hardening being predominantly driven by dislocation strengthening(67.77%).High-performance SLM Mg-RE alloy components were manufactured and showcased at TCT Asia 2024,receiving favorable attention.This work underscores the significant application potential of SLM Mg-RE alloys and establishes a strong foundation for advancing their use in the biomedical fields.
文摘A key component of future lunar missions is the concept of in-situ resource utilization(ISRU),which involves the use of local resources to support human missions and reduce dependence on Earth-based supplies.This paper investigates the thermal processing capability of lunar regolith without the addition of binders,with a focus on large-scale applications for the construction of lunar habitats and infrastructure.The study used a simulant of lunar regolith found on the Schr?dinger Basin in the South Pole region.This regolith simulant consists of20 wt%basalt and 80 wt%anorthosite.Experiments were conducted using a high power CO_(2)laser to sinter and melt the regolith in a 80 mm diameter laser spot to evaluate the effectiveness of direct large area thermal processing.Results indicated that sintering begins at approximately 1180℃and reaches full melt at temperatures above 1360℃.Sintering experiments with this material revealed the formation of dense samples up to 11 mm thick,while melting experiments successfully produced larger samples by overlapping molten layers and additive manufacturing up to 50 mm thick.The energy efficiency of the sintering and melting processes was compared.The melting process was about 10 times more energy efficient than sintering in terms of material consolidation,demonstrating the promising potential of laser melting technologies of anorthosite-rich regolith for the production of structural elements.
