Understanding the thermodynamic behavior of complex fluids in confined environments is critical for various industrial and natural processes including but not limited to polymer flooding enhanced oil recovery(EOR).In ...Understanding the thermodynamic behavior of complex fluids in confined environments is critical for various industrial and natural processes including but not limited to polymer flooding enhanced oil recovery(EOR).In this work,we develop Atif-V2.0,an extended classical density functional theory(cDFT)framework that integrates the interfacial statistical associating fluid theory(iSAFT)to model multicomponent associating fluids composed of water-soluble polymers,alkanes,and water.Building on the original theoretical framework of Atif for modeling nanoconfined inhomogeneous fluids,Atif-V2.0 embeds explicit solvent and captures additional physical interactions-hydrogen bonding,which are critical in associating fluid systems.The other key feature of Atif-V2.0 is its ability to account for polymer topology.We demonstrate its capability by predicting the equilibrium structure and thermodynamic behavior of branched hydrolyzed polyacrylamide solutions near hard walls with various branching topologies,which provides a robust theoretical tool for the rational design of EOR polymers.展开更多
We aim to find one highly nontrivial example of the solutions to the vortex fluid dynamical equation on the unit sphere(S^(2))and compare it with the numerical simulation.Since the rigid rotating steady solution for v...We aim to find one highly nontrivial example of the solutions to the vortex fluid dynamical equation on the unit sphere(S^(2))and compare it with the numerical simulation.Since the rigid rotating steady solution for vortex fluids on S^(2)is already known to us,we consider the perturbations above it.After decomposing the perturbation of the vortex number density and vortex charge density into spherical harmonics,we find that the perturbations are propagating waves.To be precise,the velocities for different single-mode vortex number density waves are all the same,while the velocities for single-mode vortex charge density waves depend on the degree of the spherical harmonics l,which is a signal of the existence of dispersion.Meanwhile,we find that there is a beat phenomenon for the positive(or negative)vortex density wave.Numerical simulation based on the canonical equations for the point vortex model agrees perfectly with our theoretical calculations.展开更多
Predictions of fluid distribution,stress field,and natural fracture are essential for exploiting unconventional shale gas reservoirs.Given the high likelihood of tilted fractures in subsurface formations,this study fo...Predictions of fluid distribution,stress field,and natural fracture are essential for exploiting unconventional shale gas reservoirs.Given the high likelihood of tilted fractures in subsurface formations,this study focuses on simultaneous seismic inversion to estimate fluid bulk modulus,effective stress parameter,and fracture density in the tilted transversely isotropic(TTI)medium.In this article,a novel PP-wave reflection coefficient approximation equation is first derived based on the constructed TTI stiffness matrix incorporating fracture density,effective stress parameter,and fluid bulk modulus.The high accuracy of the proposed equation has been demonstrated using an anisotropic two-layer model.Furthermore,a stepwise seismic inversion strategy with the L_(P) quasi-norm sparsity constraint is implemented to obtain the anisotropic and isotropic parameters.Three synthetic model tests with varying signal-to-noise ratios(SNRs)confirm the method's feasibility and noise robustness.Ultimately,the proposed method is applied to a 3D fractured shale gas reservoir in the Sichuan Basin,China.The results have effectively characterized shale gas distribution,stress fields,and tilted natural fractures,with validation from geological structures,well logs,and microseismic events.These findings can provide valuable guidance for hydraulic fracturing development,enabling more reliable predictions of reservoir heterogeneity and completion quality.展开更多
Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging tec...Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.展开更多
Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturiza...Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturization.In particular,the spin-exchange relaxation-free(SERF)atomic gyroscope relies on optical pumping to polarize atoms,enabling rotation sensing through the Faraday optical rotation angle(FORA).However,fluctuations in atomic density introduce systematic errors in FORA measurements,limiting long-term stability.We present a data-driven decoupling method that isolates atomic density fluctuations from the FORA signal by modeling spatially resolved light absorption in the vapor cell.The model accounts for the spatial distribution of spin polarization in the pump-light interaction volume,density-dependent relaxation rates,wall-induced relaxation,and polarization diffusion,and is implemented within a finite-element framework.Compared to the conventional Lambert-Beer law,which assumes one-dimensional homogeneity,our approach captures the full threedimensional density and polarization distribution,significantly improving the accuracy of light absorption modeling.The resulting absorption-density maps are used to train a feedforward neural network,yielding a high-precision estimator for atomic density fluctuations.This estimator enables the construction of a decoupling equation that separates the density contribution from the FORA signal.Experimental validation shows that this method improves the bias instability atσ(100 s)of the gyroscope was improved by 73.1%compared to traditional platinum-resistance-based stabilization.The proposed framework is general and can be extended to other optical pumping-based sensors,such as optically pumped magnetometers.展开更多
In this study,we analyze the impact of the May 2024 geomagnetic storm on the thermospheric mass density by using TianMu-1 constellation satellite(TM02,TM06,TM07,TM11,TM15)observations.These observations reveal intense...In this study,we analyze the impact of the May 2024 geomagnetic storm on the thermospheric mass density by using TianMu-1 constellation satellite(TM02,TM06,TM07,TM11,TM15)observations.These observations reveal intense large-scale traveling atmospheric disturbances(TADs)originating at high latitudes and propagating equatorward.Observations by TM02 captured the evolution of a TAD structure:An initial amplitude of~3.89×10^(-12)kg/m^(3)at hundred-kilometer scale subsequently intensified to 4.78×10^(-12)kg/m^(3),with the spatial extent expanding to the thousand-kilometer level.Significant hemispheric asymmetry was observed:the absolute density was higher predominantly in the northern hemisphere(TM02,TM06,TM07,TM11),whereas the difference in the relative density consistently showed greater enhancements in the southern hemisphere across all satellites,with the maximum north-south density differences exceeding 195%-640%above 60°latitude.In conjunction with SuperDARN(Super Dual Auroral Radar Network)observations,this striking hemispheric asymmetry can likely be attributed to disparities in plasma convection patterns between the two hemispheres.Furthermore,density perturbation characteristics exhibited strong local time(LT)dependence:Near noon(~10.7 LT,TM02 descending),the northern hemisphere onset preceded the southern onset.Conversely,near dusk(~17.6 LT,TM15 descending),the southern onset led the northern onset by approximately 3 hours.Ascending orbits(TM02,TM06,TM07,TM15)typically yielded larger global density enhancements compared with smaller southern-confined enhancements during descending orbits.Satellite TM11 showed comparable perturbations in both ascending and descending orbits.By leveraging its unique orbital architecture,the TianMu-1 constellation enables global near-simultaneous multi-LT sampling,providing a robust data foundation for both scientific research and engineering applications.展开更多
Charge density wave,a periodic modulation of electronic charge density often accompanied by a periodic lattice distortion,plays a vital role to induce exotic phenomena in condensed matter physics.In non-magnetic quant...Charge density wave,a periodic modulation of electronic charge density often accompanied by a periodic lattice distortion,plays a vital role to induce exotic phenomena in condensed matter physics.In non-magnetic quantum materials,contrast inversion in scanning tunneling microscopy images,observed between opposite bias polarity,serves as a hallmark of the charge density wave.However,in itinerant ferromagnetic systems,charge density wave formation competes with magnetism:A charge density wave order typically reduces the density of states at the Fermi level,while the Stoner criterion for spontaneous spin polarization requires a high density of states at Fermi level.Therefore,direct real-space observation of such polarity-dependent contrast inversion in ferromagnetic materials remains elusive and experimentally challenging.Here,we demonstrate the observation of a charge density wave in itinerant ferromagnet Fe_(5)GeTe_(2) associated with √3×√3 superlattice,revealed through polarity-dependent scanning tunneling microscopy imaging.Importantly,we observe a gap-like dip at the Fermi level in tunneling spectra,serving additional evidence for the emergence of charge density wave in Fe_(5)GeTe_(2).Interestingly,the strength of charge modulation can be systematically tuned by Fe1 vacancies and impurities,while the spectroscopic intensity shows a high sensitivity to surface degradation.Our finding provides an inspiring insight to charge density wave on the van der Waals ferromagnetic materials.展开更多
Hydrocarbons are very often associated with salt structures. The oil and gas industry is often required to drill along and through long salt sections to reach and recover hydrocarbons. The unique physical properties o...Hydrocarbons are very often associated with salt structures. The oil and gas industry is often required to drill along and through long salt sections to reach and recover hydrocarbons. The unique physical properties of salt require special techniques to ensure borehole stability and adequate casing design. This paper assumed that the mechanical behavior of salt is regulated by the magnitude of mean stress and octahedral shear stress and under the influence of different stress conditions the deformation of rock salt can be represented by three domains, i.e. compression domain, volume unchanged domain, and dilatancy domain, which are separated by a stress dependent boundary. In the compression domain, the volume of salt decreases until all microcracks are closed, with only elastic deformation and pure creep; in the volume unchanged domain the deformation is considered steady incompressible flow controlled by pure creep; and in the dilatancy domain the volume of salt increases during deformation due to micro-cracking, causing damage and accelerating ＂creep＂ until failure. This paper presents a hypothesis that the borehole is stable only when the magnitude of octahedral shear stress is below the dilatancy boundary. It gives the design method for determining drilling fluids density, and calculates the closure rate ofborehole with the recommended drilling fluids density. If the closure rate of the borehole is less than 0.1%, the drilling fluids density window can be used during drilling through extremely thick salt formations.展开更多
To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the theology of water-based drilling fluids. This paper examines...To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the theology of water-based drilling fluids. This paper examines temperature effects on the rheological properties of two types of high-density water-based drilling fluids （fresh water-based and brine-based） under high temperature and high pressure （HTHP） with a Fann 50SL rheometer. On the basis of the water-based drilling fluid systems formulated in laboratory, this paper mainly describes the influences of different types and concentration of clay, the content of a colloid stabilizer named GHJ-1 and fluid density on the rheological parameters such as viscosity and shear stress. In addition, the effects of aging temperature and aging time of the drilling fluid on these parameters were also examined. Clay content and proportions for different densities of brine-based fluids were recommended to effectively regulate the rheological properties. Four theological models, the Bingham, power law, Casson and H-B models, were employed to fit the rheological parameters. It turns out that the H-B model was the best one to describe the rheological properties of the high-density drilling fluid under HTHP conditions and power law model produced the worst fit. In addition, a new mathematical model that describes the apparent viscosity as a function of temperature and pressure was established and has been applied on site.展开更多
Covering a wide range of bulk densities, density profiles for hard-sphere chain fluids (HSCFs) with chain length of 3,4,8,20,32 and 64 confined between two surfaces were obtained by Monte Carlo simulations using exten...Covering a wide range of bulk densities, density profiles for hard-sphere chain fluids (HSCFs) with chain length of 3,4,8,20,32 and 64 confined between two surfaces were obtained by Monte Carlo simulations using extended continuum configurational-bias (ECCB) method. It is shown that the enrichment of beads near surfaces is happened at high densities due to the bulk packing effect, on the contrary, the depletion is revealed at low densities owing to the configurational entropic contribution. Comparisons with those calculated by density functional theory presented by Cai et al. indicate that the agreement between simulations and predictions is good. Compressibility factors of bulk HSCFs calculated using volume fractions at surfaces were also used to test the reliability of various equations of state of HSCFs by different authors.展开更多
This study simulates the behavior of a jet issuing into a two-layer density-stratified fluid in a cylindrical tank and the resulting mixing phenomena. The upper and lower fluids are water and an aqueous solution of so...This study simulates the behavior of a jet issuing into a two-layer density-stratified fluid in a cylindrical tank and the resulting mixing phenomena. The upper and lower fluids are water and an aqueous solution of sodium chloride (NaCl), respectively, with the lower fluid issuing diagonally upward from a nozzle on the bottom of the tank. The angle between the centerline of the jet and the tank bottom is 60°. The phenomena when the Reynolds number Re of the jet is 475, 1426, and 2614 are simulated. The mass concentration of the aqueous solution of NaCl is 0.02. The simulation successfully grasps the jet behavior and the resulting mixing, which agree with the authors’ experimental results at the corresponding Re value. The secondary flows that appear in the horizontal cross-sections consist of a pair of vortices and flows along the tank wall. The secondary flow at the density interface represents the intrusion of an internal density current, which gives rise to mixing along the interface.展开更多
This study experimentally investigates a jet flow issued into a two-layer density-stratified fluid in a tank and the resultant mixing phenomena. The upper and lower fluids are water and a NaCl- water solution, respect...This study experimentally investigates a jet flow issued into a two-layer density-stratified fluid in a tank and the resultant mixing phenomena. The upper and lower fluids are water and a NaCl- water solution, respectively, with the lower fluid issued vertically upward from a circular nozzle mounted on the tank bottom. Experimental highlights of the jet behavior and mixing phenomena are classified into three patterns according to the jet Reynolds number and mass concentration of the NaCl-water solution. The internal density current clearly occurs along the density interface, and the maximum jet height is predicted by the Froude number defined by the density difference between the upper and lower fluids. The effect of fluid thickness on the maximum jet height is also clarified.展开更多
This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The...This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The density interface displacements and the velocity potentials were solved to the second-order by an expansion approach used by Longuet-Higgins （1963） and Dean （1979） in the study of random surface waves and by Song （2004） in the study of second- order random wave solutions for internal waves in a two-layer fluid. The obtained results indicate that the first-order solutions are a linear superposition of many wave components with different amplitudes, wave numbers and frequencies, and that the amplitudes of first-order wave components with the same wave numbers and frequencies between the adjacent density interfaces are modulated by each other. They also show that the second-order solutions consist of two parts： the first one is the first-order solutions, and the second one is the solutions of the second-order asymptotic equations, which describe the second-order nonlinear modification and the second-order wave-wave interactions not only among the wave components on same density interfaces but also among the wave components between the adjacent density interfaces. Both the first-order and second-order solutions depend on the density and depth of each layer. It is also deduced that the results of the present work include those derived by Song （2004） for second-order random wave solutions for internal waves in a two-layer fluid as a particular case.展开更多
This study is concerned with the experimental investigation of a jet issuing diagonally upward into a two-layer density-stratified fluid in a cylindrical tank and the resulting mixing phenomena. The upper and lower fl...This study is concerned with the experimental investigation of a jet issuing diagonally upward into a two-layer density-stratified fluid in a cylindrical tank and the resulting mixing phenomena. The upper and lower fluids are water and an aqueous solution of sodium chloride (NaCl), respectively, and the lower fluid issues from a nozzle on the bottom of the tank. The angle between the centerline of the jet and the bottom of the tank is 60o, and the mass concentration of the NaCl solution is 0.02. The investigation reveals that secondary flow is caused by the jet in the horizontal cross-sections of the tank and that it is composed of a pair of vortices. It confirms that the secondary flow at the density interface corresponds to an internal density current. The investigation also clarifies the effect of the Reynolds number of the jet on mixing between the lower and upper fluids.展开更多
Three high-temperature resistant polymeric additives for water-based drilling fluids are designed and developed:weakly cross-linked zwitterionic polymer fluid loss reducer(WCZ),flexible polymer microsphere nano-pluggi...Three high-temperature resistant polymeric additives for water-based drilling fluids are designed and developed:weakly cross-linked zwitterionic polymer fluid loss reducer(WCZ),flexible polymer microsphere nano-plugging agent(FPM)and comb-structure polymeric lubricant(CSP).A high-temperature resistant and high-density polymeric saturated brine-based drilling fluid was developed for deep drilling.The WCZ has a good anti-polyelectrolyte effect and exhibits the API fluid loss less than 8 mL after aging in saturated salt environment at 200°C.The FPM can reduce the fluid loss by improving the quality of the mud cake and has a good plugging effect on nano-scale pores/fractures.The CSP,with a weight average molecular weight of 4804,has multiple polar adsorption sites and exhibits excellent lubricating performance under high temperature and high salt conditions.The developed drilling fluid system with a density of 2.0 g/cm^(3)has good rheological properties.It shows a fluid loss less than 15 mL at 200°C and high pressure,a sedimentation factor(SF)smaller than 0.52 after standing at high temperature for 5 d,and a rolling recovery of hydratable drill cuttings similar to oil-based drilling fluid.Besides,it has good plugging and lubricating performance.展开更多
This article studied experimentally the effect of multi-wall carbon nanotubes （MWCNTs） on the thermo physical properties of ionic liquid-based nanofluids. The nanofluids were composed of ionic liquid, 1-ethyl-3- met...This article studied experimentally the effect of multi-wall carbon nanotubes （MWCNTs） on the thermo physical properties of ionic liquid-based nanofluids. The nanofluids were composed of ionic liquid, 1-ethyl-3- methylimidazolium diethylphosphate [EMIM][DEP], or its aqueous solution[EMIM][DEP]（1） ＋ H20（2） and MWCNTs without any surfactants. The thermal conductivity, viscosity and density of the nanofluids were mea- sured experimentally. The effects of the mass fraction of MWCNTs, temperature and the mole fraction of water on the thermo physical properties of nanofluids were studied. Results show that the thermal conductivity of nanofluids increases within the range of 1.3%-9.7% compared to their base liquids, and have a well linear depen- dence on temperature. The viscosity and density of the nanofluids exhibit a remarkable increase compared with those of the base liquids. Finally, the correlation of the effective thermal conductivity and viscosity of the nanofluids was made using the models in the literatures.展开更多
The relationship between fluid density and saturation and sonic wave velocity of rock samples taken from the WXS Depression in the South China Sea was studied by an oil-water replacement experiment under simulated in-...The relationship between fluid density and saturation and sonic wave velocity of rock samples taken from the WXS Depression in the South China Sea was studied by an oil-water replacement experiment under simulated in-situ temperature and pressure conditions.Two kinds of low-density oils（0.691 and 0.749 g/cm^3） and two kinds of high-density oils（0.834 and 0.873 g/cm^3） were used to saturate the rock samples at different oil-saturation states,and the saturated P- and S-wave velocities were measured.Through Gassmann＇s equation,the theoretical P- and S-wave velocities were also calculated by the fluid replacement method.With the comparison of the measured values and the theoretical values, this study comes to the following conclusions.（1） With the increase of oil saturation and the decrease of water saturation,the P-wave velocity of rock samples saturated by low-density oil increases and the changing rule is in accord with the effective fluid theory;the P-wave velocity of rock samples saturated by high-density oil decreases and the changing rule goes against the theory.（2） With the increase of oil density（namely 0.691→0.749→0.834→0.873 g/cm^3） when oil saturation is unchanged,P-wave velocity increases gradually.（3） The S-wave velocity is always stable and is not affected by the change of oil density and saturation.The results can be used to constrain pre-stack seismic inversion,and the variation rule of sonic wave velocity is valuable for hydrocarbon identification in the study area.展开更多
By using the statistical mechanics, the pressure tensor for the multi component fluid mixture is derived. With the help of the classical density functional theory, profiles of the pressure components are calculated, a...By using the statistical mechanics, the pressure tensor for the multi component fluid mixture is derived. With the help of the classical density functional theory, profiles of the pressure components are calculated, and the influence of the total volume fraction, ratio of volume fraction, and size asymmetry on the pressure are studied. In addition, our results show that for the mixture confined in the hard cavity, the pressure shows a discontinuity near the cavity wall. However, in the soft cavity condition, the discontinuity disappears.展开更多
The excess Helmholtz free energy functional for nonpolar chain-like molecules is formulated in terms of a weighted density approximation （WDA） for short-range interactions and a Weaks Chandler Andersen （WCA） appro...The excess Helmholtz free energy functional for nonpolar chain-like molecules is formulated in terms of a weighted density approximation （WDA） for short-range interactions and a Weaks Chandler Andersen （WCA） approximation and a Barker Henderson （BH） theory for long-range attraction. Within the framework of density functional theory （DFT）, vapour liquid interracial properties including density profile and surface tension, and vapour-liquid nucleation properties including density profile, work of formation and number of particles are investigated for spherical and chain- like molecules. The obtained vapour liquid surface tension and the number of particles in critical nucleus for Lennard- Jones （L J） fluids are consistent with the simulation results. The influences of supersaturation, temperature and chain length on vapour liquid nucleation properties are discussed.展开更多
As the depth and horizontal length of shale gas development wells increase,the requirement for the temperature resistance and the ability of the drilling fluids to stabilize the shale formation becomes higher.A new ty...As the depth and horizontal length of shale gas development wells increase,the requirement for the temperature resistance and the ability of the drilling fluids to stabilize the shale formation becomes higher.A new type of high temperature and high density white oil based drilling fluid system has been developed in laboratory.Research shows that the drilling fluid system has good rheological property,low filtration loss,strong anti-debris pollution capability and good plugging performance at high temperature and high density.The system has been successfully applied in the 201H7-6 well.Application results show that the drilling fluid rheology,high temperature and high pressure fluid loss and demulsification voltage meet the field requirements.The drilling fluid performance is stable in drilling an 1800 m horizontal section,and no stuck or shale swelling and wellbore collapsing are induced.It is the first well drilled successfully with domestic white oil-based drilling fluid in Zigong Region.It also sets several new records including the deepest well,the shortest drilling cycle,and the fastest drilling speed in that region,which provides valuable experience for the future drilling activities.展开更多
基金financially supported by the Key Technologies R&D Program of China National Offshore Oil Corporation(No.KJGG2021-0504)。
文摘Understanding the thermodynamic behavior of complex fluids in confined environments is critical for various industrial and natural processes including but not limited to polymer flooding enhanced oil recovery(EOR).In this work,we develop Atif-V2.0,an extended classical density functional theory(cDFT)framework that integrates the interfacial statistical associating fluid theory(iSAFT)to model multicomponent associating fluids composed of water-soluble polymers,alkanes,and water.Building on the original theoretical framework of Atif for modeling nanoconfined inhomogeneous fluids,Atif-V2.0 embeds explicit solvent and captures additional physical interactions-hydrogen bonding,which are critical in associating fluid systems.The other key feature of Atif-V2.0 is its ability to account for polymer topology.We demonstrate its capability by predicting the equilibrium structure and thermodynamic behavior of branched hydrolyzed polyacrylamide solutions near hard walls with various branching topologies,which provides a robust theoretical tool for the rational design of EOR polymers.
基金supported by the Scientific research projects of Hunan Provincial Department of Education(Grant Nos.22A0477 and 20B273)。
文摘We aim to find one highly nontrivial example of the solutions to the vortex fluid dynamical equation on the unit sphere(S^(2))and compare it with the numerical simulation.Since the rigid rotating steady solution for vortex fluids on S^(2)is already known to us,we consider the perturbations above it.After decomposing the perturbation of the vortex number density and vortex charge density into spherical harmonics,we find that the perturbations are propagating waves.To be precise,the velocities for different single-mode vortex number density waves are all the same,while the velocities for single-mode vortex charge density waves depend on the degree of the spherical harmonics l,which is a signal of the existence of dispersion.Meanwhile,we find that there is a beat phenomenon for the positive(or negative)vortex density wave.Numerical simulation based on the canonical equations for the point vortex model agrees perfectly with our theoretical calculations.
基金financially supported by the Natural Science Foundation of Sichuan Province(Grant Nos.2023NSFSC0767 and2024NSFSC0809)the China Postdoctoral Science Foundation(Grant No.2024MF750281)the Postdoctoral Fellowship Program of CPSF(Grant No.GZC20230326)。
文摘Predictions of fluid distribution,stress field,and natural fracture are essential for exploiting unconventional shale gas reservoirs.Given the high likelihood of tilted fractures in subsurface formations,this study focuses on simultaneous seismic inversion to estimate fluid bulk modulus,effective stress parameter,and fracture density in the tilted transversely isotropic(TTI)medium.In this article,a novel PP-wave reflection coefficient approximation equation is first derived based on the constructed TTI stiffness matrix incorporating fracture density,effective stress parameter,and fluid bulk modulus.The high accuracy of the proposed equation has been demonstrated using an anisotropic two-layer model.Furthermore,a stepwise seismic inversion strategy with the L_(P) quasi-norm sparsity constraint is implemented to obtain the anisotropic and isotropic parameters.Three synthetic model tests with varying signal-to-noise ratios(SNRs)confirm the method's feasibility and noise robustness.Ultimately,the proposed method is applied to a 3D fractured shale gas reservoir in the Sichuan Basin,China.The results have effectively characterized shale gas distribution,stress fields,and tilted natural fractures,with validation from geological structures,well logs,and microseismic events.These findings can provide valuable guidance for hydraulic fracturing development,enabling more reliable predictions of reservoir heterogeneity and completion quality.
基金supported by the National Natural Science Foundation of China(U23B20151 and 52171253).
文摘Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.
基金supported by the Beijing Natural Science Foundation(Grant No.3252013)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0300402)+1 种基金the National Natural Science Foundation of China(Grant No.61673041)Key Area Research and Development Program of Guangdong Province(Grant No.2021B0101410005)。
文摘Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturization.In particular,the spin-exchange relaxation-free(SERF)atomic gyroscope relies on optical pumping to polarize atoms,enabling rotation sensing through the Faraday optical rotation angle(FORA).However,fluctuations in atomic density introduce systematic errors in FORA measurements,limiting long-term stability.We present a data-driven decoupling method that isolates atomic density fluctuations from the FORA signal by modeling spatially resolved light absorption in the vapor cell.The model accounts for the spatial distribution of spin polarization in the pump-light interaction volume,density-dependent relaxation rates,wall-induced relaxation,and polarization diffusion,and is implemented within a finite-element framework.Compared to the conventional Lambert-Beer law,which assumes one-dimensional homogeneity,our approach captures the full threedimensional density and polarization distribution,significantly improving the accuracy of light absorption modeling.The resulting absorption-density maps are used to train a feedforward neural network,yielding a high-precision estimator for atomic density fluctuations.This estimator enables the construction of a decoupling equation that separates the density contribution from the FORA signal.Experimental validation shows that this method improves the bias instability atσ(100 s)of the gyroscope was improved by 73.1%compared to traditional platinum-resistance-based stabilization.The proposed framework is general and can be extended to other optical pumping-based sensors,such as optically pumped magnetometers.
基金funded by the TianMu-1 Constellation Atmospheric Density Detector(Grant No.E3C1162110).
文摘In this study,we analyze the impact of the May 2024 geomagnetic storm on the thermospheric mass density by using TianMu-1 constellation satellite(TM02,TM06,TM07,TM11,TM15)observations.These observations reveal intense large-scale traveling atmospheric disturbances(TADs)originating at high latitudes and propagating equatorward.Observations by TM02 captured the evolution of a TAD structure:An initial amplitude of~3.89×10^(-12)kg/m^(3)at hundred-kilometer scale subsequently intensified to 4.78×10^(-12)kg/m^(3),with the spatial extent expanding to the thousand-kilometer level.Significant hemispheric asymmetry was observed:the absolute density was higher predominantly in the northern hemisphere(TM02,TM06,TM07,TM11),whereas the difference in the relative density consistently showed greater enhancements in the southern hemisphere across all satellites,with the maximum north-south density differences exceeding 195%-640%above 60°latitude.In conjunction with SuperDARN(Super Dual Auroral Radar Network)observations,this striking hemispheric asymmetry can likely be attributed to disparities in plasma convection patterns between the two hemispheres.Furthermore,density perturbation characteristics exhibited strong local time(LT)dependence:Near noon(~10.7 LT,TM02 descending),the northern hemisphere onset preceded the southern onset.Conversely,near dusk(~17.6 LT,TM15 descending),the southern onset led the northern onset by approximately 3 hours.Ascending orbits(TM02,TM06,TM07,TM15)typically yielded larger global density enhancements compared with smaller southern-confined enhancements during descending orbits.Satellite TM11 showed comparable perturbations in both ascending and descending orbits.By leveraging its unique orbital architecture,the TianMu-1 constellation enables global near-simultaneous multi-LT sampling,providing a robust data foundation for both scientific research and engineering applications.
基金the support by the National Key Research and Development Program of China(No.2024YFA1408104(H.T.Y.))the National Natural Science Foundation of China(Nos.92365203(H.T.Y.),U24A6002(H.T.Y.),12104238(Y.F.L.),and U21A2085(Z.Y.L.(Zhongyuan Liu))+2 种基金Innovation Program for Quantum Science and Technology(No.2021ZD0302502(H.T.Y.))the Natural Science Foundation of Jiangsu Province(Nos.BK20253012(H.T.Y.),BK20233001(H.T.Y.),BK20243011(H.T.Y.),and BK20253027(Y.F.L.))the support from the Jiangsu Key Laboratory of Artificial Functional Materials.
文摘Charge density wave,a periodic modulation of electronic charge density often accompanied by a periodic lattice distortion,plays a vital role to induce exotic phenomena in condensed matter physics.In non-magnetic quantum materials,contrast inversion in scanning tunneling microscopy images,observed between opposite bias polarity,serves as a hallmark of the charge density wave.However,in itinerant ferromagnetic systems,charge density wave formation competes with magnetism:A charge density wave order typically reduces the density of states at the Fermi level,while the Stoner criterion for spontaneous spin polarization requires a high density of states at Fermi level.Therefore,direct real-space observation of such polarity-dependent contrast inversion in ferromagnetic materials remains elusive and experimentally challenging.Here,we demonstrate the observation of a charge density wave in itinerant ferromagnet Fe_(5)GeTe_(2) associated with √3×√3 superlattice,revealed through polarity-dependent scanning tunneling microscopy imaging.Importantly,we observe a gap-like dip at the Fermi level in tunneling spectra,serving additional evidence for the emergence of charge density wave in Fe_(5)GeTe_(2).Interestingly,the strength of charge modulation can be systematically tuned by Fe1 vacancies and impurities,while the spectroscopic intensity shows a high sensitivity to surface degradation.Our finding provides an inspiring insight to charge density wave on the van der Waals ferromagnetic materials.
文摘Hydrocarbons are very often associated with salt structures. The oil and gas industry is often required to drill along and through long salt sections to reach and recover hydrocarbons. The unique physical properties of salt require special techniques to ensure borehole stability and adequate casing design. This paper assumed that the mechanical behavior of salt is regulated by the magnitude of mean stress and octahedral shear stress and under the influence of different stress conditions the deformation of rock salt can be represented by three domains, i.e. compression domain, volume unchanged domain, and dilatancy domain, which are separated by a stress dependent boundary. In the compression domain, the volume of salt decreases until all microcracks are closed, with only elastic deformation and pure creep; in the volume unchanged domain the deformation is considered steady incompressible flow controlled by pure creep; and in the dilatancy domain the volume of salt increases during deformation due to micro-cracking, causing damage and accelerating ＂creep＂ until failure. This paper presents a hypothesis that the borehole is stable only when the magnitude of octahedral shear stress is below the dilatancy boundary. It gives the design method for determining drilling fluids density, and calculates the closure rate ofborehole with the recommended drilling fluids density. If the closure rate of the borehole is less than 0.1%, the drilling fluids density window can be used during drilling through extremely thick salt formations.
文摘To maintain tight control over rheological properties of high-density water-based drilling fluids, it is essential to understand the factors influencing the theology of water-based drilling fluids. This paper examines temperature effects on the rheological properties of two types of high-density water-based drilling fluids （fresh water-based and brine-based） under high temperature and high pressure （HTHP） with a Fann 50SL rheometer. On the basis of the water-based drilling fluid systems formulated in laboratory, this paper mainly describes the influences of different types and concentration of clay, the content of a colloid stabilizer named GHJ-1 and fluid density on the rheological parameters such as viscosity and shear stress. In addition, the effects of aging temperature and aging time of the drilling fluid on these parameters were also examined. Clay content and proportions for different densities of brine-based fluids were recommended to effectively regulate the rheological properties. Four theological models, the Bingham, power law, Casson and H-B models, were employed to fit the rheological parameters. It turns out that the H-B model was the best one to describe the rheological properties of the high-density drilling fluid under HTHP conditions and power law model produced the worst fit. In addition, a new mathematical model that describes the apparent viscosity as a function of temperature and pressure was established and has been applied on site.
基金Supported by the National Science Foundation of China (No. 29736170, No. 20025618) and the Doctoral Research Foundation by Ministry of Education of China (No. 1999025103). Additional support provided by the Visiting Researcher Foundation of University La
文摘Covering a wide range of bulk densities, density profiles for hard-sphere chain fluids (HSCFs) with chain length of 3,4,8,20,32 and 64 confined between two surfaces were obtained by Monte Carlo simulations using extended continuum configurational-bias (ECCB) method. It is shown that the enrichment of beads near surfaces is happened at high densities due to the bulk packing effect, on the contrary, the depletion is revealed at low densities owing to the configurational entropic contribution. Comparisons with those calculated by density functional theory presented by Cai et al. indicate that the agreement between simulations and predictions is good. Compressibility factors of bulk HSCFs calculated using volume fractions at surfaces were also used to test the reliability of various equations of state of HSCFs by different authors.
文摘This study simulates the behavior of a jet issuing into a two-layer density-stratified fluid in a cylindrical tank and the resulting mixing phenomena. The upper and lower fluids are water and an aqueous solution of sodium chloride (NaCl), respectively, with the lower fluid issuing diagonally upward from a nozzle on the bottom of the tank. The angle between the centerline of the jet and the tank bottom is 60°. The phenomena when the Reynolds number Re of the jet is 475, 1426, and 2614 are simulated. The mass concentration of the aqueous solution of NaCl is 0.02. The simulation successfully grasps the jet behavior and the resulting mixing, which agree with the authors’ experimental results at the corresponding Re value. The secondary flows that appear in the horizontal cross-sections consist of a pair of vortices and flows along the tank wall. The secondary flow at the density interface represents the intrusion of an internal density current, which gives rise to mixing along the interface.
文摘This study experimentally investigates a jet flow issued into a two-layer density-stratified fluid in a tank and the resultant mixing phenomena. The upper and lower fluids are water and a NaCl- water solution, respectively, with the lower fluid issued vertically upward from a circular nozzle mounted on the tank bottom. Experimental highlights of the jet behavior and mixing phenomena are classified into three patterns according to the jet Reynolds number and mass concentration of the NaCl-water solution. The internal density current clearly occurs along the density interface, and the maximum jet height is predicted by the Froude number defined by the density difference between the upper and lower fluids. The effect of fluid thickness on the maximum jet height is also clarified.
基金Project supported by the National Science Fund for Distinguished Young Scholars （Grant No 40425015）, the Cooperative Project of Chinese Academy Sciences and the China National 0ffshore oil Corporation （＂Behaviours of internal waves and their roles on the marine structures＂） and the National Natural Science Foundation of China （Grant No10461005）.
文摘This paper studies the random internal wave equations describing the density interface displacements and the velocity potentials of N-layer stratified fluid contained between two rigid walls at the top and bottom. The density interface displacements and the velocity potentials were solved to the second-order by an expansion approach used by Longuet-Higgins （1963） and Dean （1979） in the study of random surface waves and by Song （2004） in the study of second- order random wave solutions for internal waves in a two-layer fluid. The obtained results indicate that the first-order solutions are a linear superposition of many wave components with different amplitudes, wave numbers and frequencies, and that the amplitudes of first-order wave components with the same wave numbers and frequencies between the adjacent density interfaces are modulated by each other. They also show that the second-order solutions consist of two parts： the first one is the first-order solutions, and the second one is the solutions of the second-order asymptotic equations, which describe the second-order nonlinear modification and the second-order wave-wave interactions not only among the wave components on same density interfaces but also among the wave components between the adjacent density interfaces. Both the first-order and second-order solutions depend on the density and depth of each layer. It is also deduced that the results of the present work include those derived by Song （2004） for second-order random wave solutions for internal waves in a two-layer fluid as a particular case.
文摘This study is concerned with the experimental investigation of a jet issuing diagonally upward into a two-layer density-stratified fluid in a cylindrical tank and the resulting mixing phenomena. The upper and lower fluids are water and an aqueous solution of sodium chloride (NaCl), respectively, and the lower fluid issues from a nozzle on the bottom of the tank. The angle between the centerline of the jet and the bottom of the tank is 60o, and the mass concentration of the NaCl solution is 0.02. The investigation reveals that secondary flow is caused by the jet in the horizontal cross-sections of the tank and that it is composed of a pair of vortices. It confirms that the secondary flow at the density interface corresponds to an internal density current. The investigation also clarifies the effect of the Reynolds number of the jet on mixing between the lower and upper fluids.
基金Supported by the National Natural Science Foundation of China(52288101).
文摘Three high-temperature resistant polymeric additives for water-based drilling fluids are designed and developed:weakly cross-linked zwitterionic polymer fluid loss reducer(WCZ),flexible polymer microsphere nano-plugging agent(FPM)and comb-structure polymeric lubricant(CSP).A high-temperature resistant and high-density polymeric saturated brine-based drilling fluid was developed for deep drilling.The WCZ has a good anti-polyelectrolyte effect and exhibits the API fluid loss less than 8 mL after aging in saturated salt environment at 200°C.The FPM can reduce the fluid loss by improving the quality of the mud cake and has a good plugging effect on nano-scale pores/fractures.The CSP,with a weight average molecular weight of 4804,has multiple polar adsorption sites and exhibits excellent lubricating performance under high temperature and high salt conditions.The developed drilling fluid system with a density of 2.0 g/cm^(3)has good rheological properties.It shows a fluid loss less than 15 mL at 200°C and high pressure,a sedimentation factor(SF)smaller than 0.52 after standing at high temperature for 5 d,and a rolling recovery of hydratable drill cuttings similar to oil-based drilling fluid.Besides,it has good plugging and lubricating performance.
基金Supported by the National Natural Science Foundation of China(51376036)
文摘This article studied experimentally the effect of multi-wall carbon nanotubes （MWCNTs） on the thermo physical properties of ionic liquid-based nanofluids. The nanofluids were composed of ionic liquid, 1-ethyl-3- methylimidazolium diethylphosphate [EMIM][DEP], or its aqueous solution[EMIM][DEP]（1） ＋ H20（2） and MWCNTs without any surfactants. The thermal conductivity, viscosity and density of the nanofluids were mea- sured experimentally. The effects of the mass fraction of MWCNTs, temperature and the mole fraction of water on the thermo physical properties of nanofluids were studied. Results show that the thermal conductivity of nanofluids increases within the range of 1.3%-9.7% compared to their base liquids, and have a well linear depen- dence on temperature. The viscosity and density of the nanofluids exhibit a remarkable increase compared with those of the base liquids. Finally, the correlation of the effective thermal conductivity and viscosity of the nanofluids was made using the models in the literatures.
基金supported by the Science and Technology Research Key Project of Ministry of Education (Grant No.109035)the National Natural Science Foundation Key Project(Grant No.40830423)the Key Project of Students Extra-curricular Science and Technology Research Program of Schlumberger(Grant No.SLBX0908)
文摘The relationship between fluid density and saturation and sonic wave velocity of rock samples taken from the WXS Depression in the South China Sea was studied by an oil-water replacement experiment under simulated in-situ temperature and pressure conditions.Two kinds of low-density oils（0.691 and 0.749 g/cm^3） and two kinds of high-density oils（0.834 and 0.873 g/cm^3） were used to saturate the rock samples at different oil-saturation states,and the saturated P- and S-wave velocities were measured.Through Gassmann＇s equation,the theoretical P- and S-wave velocities were also calculated by the fluid replacement method.With the comparison of the measured values and the theoretical values, this study comes to the following conclusions.（1） With the increase of oil saturation and the decrease of water saturation,the P-wave velocity of rock samples saturated by low-density oil increases and the changing rule is in accord with the effective fluid theory;the P-wave velocity of rock samples saturated by high-density oil decreases and the changing rule goes against the theory.（2） With the increase of oil density（namely 0.691→0.749→0.834→0.873 g/cm^3） when oil saturation is unchanged,P-wave velocity increases gradually.（3） The S-wave velocity is always stable and is not affected by the change of oil density and saturation.The results can be used to constrain pre-stack seismic inversion,and the variation rule of sonic wave velocity is valuable for hydrocarbon identification in the study area.
基金supported by the National Natural Science Foundation of China(Grant No.21503077)the Fundamental Research Fund for the Central Universities of China(Grant Nos.2016MS156 and 13MS105)+1 种基金the Technology Research and Development Program of Hebei Province,China(Grant No.13213704)the Program of Study Abroad for Young Teachers by Agricultural University of Hebei
文摘By using the statistical mechanics, the pressure tensor for the multi component fluid mixture is derived. With the help of the classical density functional theory, profiles of the pressure components are calculated, and the influence of the total volume fraction, ratio of volume fraction, and size asymmetry on the pressure are studied. In addition, our results show that for the mixture confined in the hard cavity, the pressure shows a discontinuity near the cavity wall. However, in the soft cavity condition, the discontinuity disappears.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 20576030 and 20606009）, the Program for New Century Excellent Talents of China （Grant No 06-0206）, and the Research Fund of Key Laboratory for Nanomaterials, Ministry of Education of China （Grant No 2006-2）.
文摘The excess Helmholtz free energy functional for nonpolar chain-like molecules is formulated in terms of a weighted density approximation （WDA） for short-range interactions and a Weaks Chandler Andersen （WCA） approximation and a Barker Henderson （BH） theory for long-range attraction. Within the framework of density functional theory （DFT）, vapour liquid interracial properties including density profile and surface tension, and vapour-liquid nucleation properties including density profile, work of formation and number of particles are investigated for spherical and chain- like molecules. The obtained vapour liquid surface tension and the number of particles in critical nucleus for Lennard- Jones （L J） fluids are consistent with the simulation results. The influences of supersaturation, temperature and chain length on vapour liquid nucleation properties are discussed.
文摘As the depth and horizontal length of shale gas development wells increase,the requirement for the temperature resistance and the ability of the drilling fluids to stabilize the shale formation becomes higher.A new type of high temperature and high density white oil based drilling fluid system has been developed in laboratory.Research shows that the drilling fluid system has good rheological property,low filtration loss,strong anti-debris pollution capability and good plugging performance at high temperature and high density.The system has been successfully applied in the 201H7-6 well.Application results show that the drilling fluid rheology,high temperature and high pressure fluid loss and demulsification voltage meet the field requirements.The drilling fluid performance is stable in drilling an 1800 m horizontal section,and no stuck or shale swelling and wellbore collapsing are induced.It is the first well drilled successfully with domestic white oil-based drilling fluid in Zigong Region.It also sets several new records including the deepest well,the shortest drilling cycle,and the fastest drilling speed in that region,which provides valuable experience for the future drilling activities.
