The effects of ethanol vapor pretreatment on the performance of CrOx/SiO2 catalysts during the dehydrogenation of propane to propylene were studied with and without the presence of CO2.The catalyst pretreated with eth...The effects of ethanol vapor pretreatment on the performance of CrOx/SiO2 catalysts during the dehydrogenation of propane to propylene were studied with and without the presence of CO2.The catalyst pretreated with ethanol vapor exhibited better catalytic activity than the pristine CrOx/SiO2,generating 41.4% propane conversion and 84.8% propylene selectivity.The various catalyst samples prepared were characterized by X-ray diffraction,transmission electron microscopy,temperature-programmed reduction,X-ray photoelectron spectroscopy and reflectance UV-Vis spectroscopy.The data show that coordinative Cr^3＋ species represent the active sites during the dehydrogenation of propane and that these species serve as precursors for the generation of Cr^3＋.Cr^3＋ is reduced during the reaction,leading to a decrease in catalytic activity.Following ethanol vapor pretreatment,the reduced CrOx in the catalyst is readily re-oxidized to Cr^6＋ by CO2.The pretreated catalyst thus exhibits high activity during the propane dehydrogenation reaction by maintaining the active Cr^3＋ states.展开更多
With the rapid development of economy,the consumption of fossil fuels and excessive emissions of carbon dioxide(CO_(2))have led to many environmental issues.The thermocatalytic conversion of CO_(2) to high value‐adde...With the rapid development of economy,the consumption of fossil fuels and excessive emissions of carbon dioxide(CO_(2))have led to many environmental issues.The thermocatalytic conversion of CO_(2) to high value‐added chemicals is an effective strategy to meet the need of carbon neutralization.Among them,CO_(2) hydrogenation to light olefins has been well researched so that the selectivity of desired products can exceed the Anderson–Schulz–Flory(ASF)distribution to acquire an extremely high yield.However,although huge progress has been made in CO_(2) hydrogenation to produce long‐chainα‐olefins based on Fe catalysts as well,designing efficient catalysts with promoted C‐O dissociation and C‐C coupling remains challenging.In addition,ASF distribution restrains the selectivity of desired long‐chain products,whereas the approaches to breaking it still face issues.In this review,we focus on the design of Fe‐based catalysts for the synthesis of long‐chainα‐olefins through CO_(2) hydrogenation.We have summarized and analyzed the reaction mechanism,design of catalysts,structure–activity relationship,interaction between Fe and promoters,and strategies to break the ASF distribution.At the same time,the issues faced by CO_(2) hydrogenation to long‐chainα‐olefins are proposed and the possible future solutions are prospected.This review aims to provide a recent development on the design of Fe‐based catalysts for CO_(2) hydrogenation to long‐chainα‐olefins while considering the ASF distribution.展开更多
The deposition of NH4 HSO4 and the poisoning effect of SO2 on SCR catalyst are the main obstacles that restrict the industrial application of CeO2-doped SCR catalysts.In this work,deposited NH4 HSO4 decomposition beha...The deposition of NH4 HSO4 and the poisoning effect of SO2 on SCR catalyst are the main obstacles that restrict the industrial application of CeO2-doped SCR catalysts.In this work,deposited NH4 HSO4 decomposition behavior and SO2 poisoning over V2 O5-MoO3/TiO2 catalysts modified with CeO2 and SiO2 were investigated.By the means of characterization analysis,it was found that the addition of SiO2 into VMo/Ti-Ce had an impact on the interaction existed between catalyst surface atoms and NH4 HSO4.Temperatureprogrammed methods and in situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS)experiments indicated that the doping of SiO2 promoted the decomposition of deposited NH4 HSO4 on VMo/Ti-Ce catalyst surface by reducing the thermal stability of NH4 HSO4 and enhancing the NH4 HSO4 reactivity with NO in low temperature.And this improvement may be the reason for the better catalytic activity than VMo/Ti-Ce in the case of NH4 HSO4 deposition.Accompanied with cerium sulfate species generated over catalyst surface,the conversion of SO2 to SO3 was inhibited in SiCe mixed catalyst.The addition of SiO2 could promote the decomposition of cerium sulfate,which may be a potential strategy to enhance the resistance of SO2 poisoning over CeO2-modifed catalysts.展开更多
In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation meth...In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation method and characterized by XRD,Raman and XPS techniques. Appropriate amount of CO2 in the reactant gases enhanced the formation of surface tetrahedral Na2WO4 species and promoted the migration of O in MOx,Na,W from the catalyst bulk to surface,which were favorable for oxidative coupling of methane. When the molar ratio of CH4/O2/CO2 was 3/1/2,enriched surface tetrahedral Na2WO4 species and high surface concentration of O in MOx,Na,W were detected,and then high CH4 conversion of 33.1% and high C2H4 selectivity of 56.2% were obtained. With further increase of CO2 in the reagent gases,the content of active surface tetrahedral Na2WO4 species and surface concentration of O in MOx,Na,W decreased,while that of inactive species（Mn WO4 and Mn2O3） increased dramatically,leading to low CH4 conversion and low C2H4 selectivity. It could be speculated that Na2WO4 crystal was transformed into Mn WO4 crystal with excessive CO2 added under the reaction conditions. Pretreatment of Na2WO4/Mn/Si O2 catalyst by moderate amount of CO2 before OCM also promoted the formation of Na2WO4 species.展开更多
The effects of operating parameters on oxidative coupling of methane （OCM） over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity （GHSV） ...The effects of operating parameters on oxidative coupling of methane （OCM） over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity （GHSV） and low temperature conditions. Experimental results show that when the operating pressure is increased, C2＋ yield slightly decreases, while the maximum ratio of ethylene to ethane remains unchanged. Moreover, it has been found empirically that increase of pressure does not affect the catalyst behavior permanently, the catalyst recovers its original low pressure performance without hysteresis behavior by reducing the pressure. Under the investigated conditions, when oxygen is completely consumed, the increase of GHSV leads to improvement in C2 selectivity, while C3＋ and COx selectivities decrease slightly. The C2＋ selectivity increases by increase of nitrogen diluent in the feed, but the C3＋ hydrocarbons selectivities decrease with increase of nitrogen since it is possible that further dilution at high pressure may reduce the probability of collision between CH3 and C2＋ hydrocarbons. During the stability test at high pressure, the catalyst performance remains unchanged throughout the 20 h running. The fresh and used catalysts were characterized using XRD, SEM and N2 adsorption-desorption methods. It was found that the phase transformation of the support from α-cristobalite to tridymite and quartz does not have obvious effect on catalyst performance at high pressure.展开更多
The purpose of this study was to prepare iron-based catalysts supported on silica by autocombustion method for directly using for Fischer-Tropsch synthesis（FTS） without a reduction step. The effect of different citr...The purpose of this study was to prepare iron-based catalysts supported on silica by autocombustion method for directly using for Fischer-Tropsch synthesis（FTS） without a reduction step. The effect of different citric acid（CA）：iron nitrate（N） molar ratios and acid types on the FTS performance of catalysts were investigated. The CA：N molar ratios had an important influence on the formation of iron active phases and FTS activity. The iron carbide（FexC）, which is known to be one of the iron active phases, was demonstrated by the X-ray diffraction and X-ray photoelectron spectroscopy. Increasing the CA：N molar ratios up to 0.1 increased CO conversion of catalyst to 86.5%, which was then decreased markedly at higher CA：N molar ratios. An excess of CA resulted in carbon residues covering the catalyst surface and declined FTS activity. The optimal catalyst（CA：N molar ratio = 0.1） achieved the highest CO conversion when compared with other autocombustion catalysts as well as reference catalyst prepared by impregnation method, followed by a reduction step. The autocombustion method had the advantage to synthesize more efficient catalysts without a reduction step. More interestingly, iron-based FTS catalysts need induction duration at the initial stage of FTS reaction even after reduction, because metallic iron species need time to be transformed to FexC. But here, even if without reduction, FexC was formed directly by autocombustion and induction period was eliminated during FTS reaction.展开更多
Fe-based catalysts are efficient systems for CO_(2)conversion via reverse water-gas shift(rWGS)reaction.Nevertheless,the nature of the active phase,namely metallic iron,iron oxide or iron carbide remains a subject of ...Fe-based catalysts are efficient systems for CO_(2)conversion via reverse water-gas shift(rWGS)reaction.Nevertheless,the nature of the active phase,namely metallic iron,iron oxide or iron carbide remains a subject of debate which our paper is meant to close.Fe0 is a much better catalyst for the rWGS than Fe_(3)C.The activity of Fe0 can be promoted by the addition of Cs and Cu whose presence hinders iron carburisation while favouring both higher conversion and enhanced selectivity.When the samples are aged in the rWGS reaction mixture during stability test a new phase appear:Fe_(5)C_(2),resulting in a more active but less selective catalysts than Fe0 for the rWGS reaction.Hence our results indicate that we could potentially achieve an optimal activity/selective balance upon finely tuning the proportion Fe/Fe_(5)C_(2).Beyond the fundamental information concerning active phase we have observed the presence of advanced Fischer-Tropsch-like products at ambient pressure opening new opportunities for the design of hybrid rWGS/Fischer-Tropsch systems.展开更多
基金the financial support from China Postdoctoral Science Foundation (2014M560224)
文摘The effects of ethanol vapor pretreatment on the performance of CrOx/SiO2 catalysts during the dehydrogenation of propane to propylene were studied with and without the presence of CO2.The catalyst pretreated with ethanol vapor exhibited better catalytic activity than the pristine CrOx/SiO2,generating 41.4% propane conversion and 84.8% propylene selectivity.The various catalyst samples prepared were characterized by X-ray diffraction,transmission electron microscopy,temperature-programmed reduction,X-ray photoelectron spectroscopy and reflectance UV-Vis spectroscopy.The data show that coordinative Cr^3＋ species represent the active sites during the dehydrogenation of propane and that these species serve as precursors for the generation of Cr^3＋.Cr^3＋ is reduced during the reaction,leading to a decrease in catalytic activity.Following ethanol vapor pretreatment,the reduced CrOx in the catalyst is readily re-oxidized to Cr^6＋ by CO2.The pretreated catalyst thus exhibits high activity during the propane dehydrogenation reaction by maintaining the active Cr^3＋ states.
基金supported by the CNPC Innovation Found(2021DQ02‐0702).
文摘With the rapid development of economy,the consumption of fossil fuels and excessive emissions of carbon dioxide(CO_(2))have led to many environmental issues.The thermocatalytic conversion of CO_(2) to high value‐added chemicals is an effective strategy to meet the need of carbon neutralization.Among them,CO_(2) hydrogenation to light olefins has been well researched so that the selectivity of desired products can exceed the Anderson–Schulz–Flory(ASF)distribution to acquire an extremely high yield.However,although huge progress has been made in CO_(2) hydrogenation to produce long‐chainα‐olefins based on Fe catalysts as well,designing efficient catalysts with promoted C‐O dissociation and C‐C coupling remains challenging.In addition,ASF distribution restrains the selectivity of desired long‐chain products,whereas the approaches to breaking it still face issues.In this review,we focus on the design of Fe‐based catalysts for the synthesis of long‐chainα‐olefins through CO_(2) hydrogenation.We have summarized and analyzed the reaction mechanism,design of catalysts,structure–activity relationship,interaction between Fe and promoters,and strategies to break the ASF distribution.At the same time,the issues faced by CO_(2) hydrogenation to long‐chainα‐olefins are proposed and the possible future solutions are prospected.This review aims to provide a recent development on the design of Fe‐based catalysts for CO_(2) hydrogenation to long‐chainα‐olefins while considering the ASF distribution.
基金supported by the National Natural Science Foundation of China(No.51576039)
文摘The deposition of NH4 HSO4 and the poisoning effect of SO2 on SCR catalyst are the main obstacles that restrict the industrial application of CeO2-doped SCR catalysts.In this work,deposited NH4 HSO4 decomposition behavior and SO2 poisoning over V2 O5-MoO3/TiO2 catalysts modified with CeO2 and SiO2 were investigated.By the means of characterization analysis,it was found that the addition of SiO2 into VMo/Ti-Ce had an impact on the interaction existed between catalyst surface atoms and NH4 HSO4.Temperatureprogrammed methods and in situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS)experiments indicated that the doping of SiO2 promoted the decomposition of deposited NH4 HSO4 on VMo/Ti-Ce catalyst surface by reducing the thermal stability of NH4 HSO4 and enhancing the NH4 HSO4 reactivity with NO in low temperature.And this improvement may be the reason for the better catalytic activity than VMo/Ti-Ce in the case of NH4 HSO4 deposition.Accompanied with cerium sulfate species generated over catalyst surface,the conversion of SO2 to SO3 was inhibited in SiCe mixed catalyst.The addition of SiO2 could promote the decomposition of cerium sulfate,which may be a potential strategy to enhance the resistance of SO2 poisoning over CeO2-modifed catalysts.
基金support from the Ministry of Science and Technology (Nos.2012BAC20B10)the National Natural Science Foundation of China (Nos. 21321061 and 20976109)
文摘In this work,the influence of CO2 on the structural variation and catalytic performance of Na2WO4/Mn/Si O2 for oxidative coupling of methane to ethylene was investigated. The catalyst was prepared by impregnation method and characterized by XRD,Raman and XPS techniques. Appropriate amount of CO2 in the reactant gases enhanced the formation of surface tetrahedral Na2WO4 species and promoted the migration of O in MOx,Na,W from the catalyst bulk to surface,which were favorable for oxidative coupling of methane. When the molar ratio of CH4/O2/CO2 was 3/1/2,enriched surface tetrahedral Na2WO4 species and high surface concentration of O in MOx,Na,W were detected,and then high CH4 conversion of 33.1% and high C2H4 selectivity of 56.2% were obtained. With further increase of CO2 in the reagent gases,the content of active surface tetrahedral Na2WO4 species and surface concentration of O in MOx,Na,W decreased,while that of inactive species（Mn WO4 and Mn2O3） increased dramatically,leading to low CH4 conversion and low C2H4 selectivity. It could be speculated that Na2WO4 crystal was transformed into Mn WO4 crystal with excessive CO2 added under the reaction conditions. Pretreatment of Na2WO4/Mn/Si O2 catalyst by moderate amount of CO2 before OCM also promoted the formation of Na2WO4 species.
文摘The effects of operating parameters on oxidative coupling of methane （OCM） over Na-W-Mn/SiO2 catalyst have been studied at elevated pressures of 0.2, 0.3 and 0.4 MPa under low gaseous hourly space velocity （GHSV） and low temperature conditions. Experimental results show that when the operating pressure is increased, C2＋ yield slightly decreases, while the maximum ratio of ethylene to ethane remains unchanged. Moreover, it has been found empirically that increase of pressure does not affect the catalyst behavior permanently, the catalyst recovers its original low pressure performance without hysteresis behavior by reducing the pressure. Under the investigated conditions, when oxygen is completely consumed, the increase of GHSV leads to improvement in C2 selectivity, while C3＋ and COx selectivities decrease slightly. The C2＋ selectivity increases by increase of nitrogen diluent in the feed, but the C3＋ hydrocarbons selectivities decrease with increase of nitrogen since it is possible that further dilution at high pressure may reduce the probability of collision between CH3 and C2＋ hydrocarbons. During the stability test at high pressure, the catalyst performance remains unchanged throughout the 20 h running. The fresh and used catalysts were characterized using XRD, SEM and N2 adsorption-desorption methods. It was found that the phase transformation of the support from α-cristobalite to tridymite and quartz does not have obvious effect on catalyst performance at high pressure.
基金financial support to the Overseas Academic Presentation Scholarship for Graduate Students, Graduate School, Chulalongkorn University
文摘The purpose of this study was to prepare iron-based catalysts supported on silica by autocombustion method for directly using for Fischer-Tropsch synthesis（FTS） without a reduction step. The effect of different citric acid（CA）：iron nitrate（N） molar ratios and acid types on the FTS performance of catalysts were investigated. The CA：N molar ratios had an important influence on the formation of iron active phases and FTS activity. The iron carbide（FexC）, which is known to be one of the iron active phases, was demonstrated by the X-ray diffraction and X-ray photoelectron spectroscopy. Increasing the CA：N molar ratios up to 0.1 increased CO conversion of catalyst to 86.5%, which was then decreased markedly at higher CA：N molar ratios. An excess of CA resulted in carbon residues covering the catalyst surface and declined FTS activity. The optimal catalyst（CA：N molar ratio = 0.1） achieved the highest CO conversion when compared with other autocombustion catalysts as well as reference catalyst prepared by impregnation method, followed by a reduction step. The autocombustion method had the advantage to synthesize more efficient catalysts without a reduction step. More interestingly, iron-based FTS catalysts need induction duration at the initial stage of FTS reaction even after reduction, because metallic iron species need time to be transformed to FexC. But here, even if without reduction, FexC was formed directly by autocombustion and induction period was eliminated during FTS reaction.
基金provided by the Royal Society Research Grant RSGR1180353partially sponsored by the CO2Chem UK through the Engineering and Physical Sciences Research Council(EPSRC)grant EP/P026435/1the Spanish Ministry of Science and Innovation through the projects RYC2018-024387-I and PID2019-108502RJ-I00.
文摘Fe-based catalysts are efficient systems for CO_(2)conversion via reverse water-gas shift(rWGS)reaction.Nevertheless,the nature of the active phase,namely metallic iron,iron oxide or iron carbide remains a subject of debate which our paper is meant to close.Fe0 is a much better catalyst for the rWGS than Fe_(3)C.The activity of Fe0 can be promoted by the addition of Cs and Cu whose presence hinders iron carburisation while favouring both higher conversion and enhanced selectivity.When the samples are aged in the rWGS reaction mixture during stability test a new phase appear:Fe_(5)C_(2),resulting in a more active but less selective catalysts than Fe0 for the rWGS reaction.Hence our results indicate that we could potentially achieve an optimal activity/selective balance upon finely tuning the proportion Fe/Fe_(5)C_(2).Beyond the fundamental information concerning active phase we have observed the presence of advanced Fischer-Tropsch-like products at ambient pressure opening new opportunities for the design of hybrid rWGS/Fischer-Tropsch systems.
