Magnetic properties and microstructure of Fe/RE multilayers(thickness of Fe single layers less than or equal to 2.0 nm) both as-deposited state and after annealing( T greater than or equal to 473 K) were studied, and ...Magnetic properties and microstructure of Fe/RE multilayers(thickness of Fe single layers less than or equal to 2.0 nm) both as-deposited state and after annealing( T greater than or equal to 473 K) were studied, and the reason of the change of magnetic properties was analyzed. The Fe single layers are considered to be composed of insular Fe domains in as-deposited films. Super-paramagnetic nature of the Fe domains of small size causes the films to exhibit paramagnetism. During annealing the growth of Fe domains results in the transformation of films from paramagnetic into ferromagnetic, which leads to the increase in H-c and M-s.展开更多
Multilayer complex dynamical networks,characterized by the intricate topological connections and diverse hierarchical structures,present significant challenges in determining complete structural configurations due to ...Multilayer complex dynamical networks,characterized by the intricate topological connections and diverse hierarchical structures,present significant challenges in determining complete structural configurations due to the unique functional attributes and interaction patterns inherent to different layers.This paper addresses the critical question of whether structural information from a known layer can be used to reconstruct the unknown intralayer structure of a target layer within general weighted output-coupling multilayer networks.Building upon the generalized synchronization principle,we propose an innovative reconstruction method that incorporates two essential components in the design of structure observers,the cross-layer coupling modulator and the structural divergence term.A key advantage of the proposed reconstruction method lies in its flexibility to freely designate both the unknown target layer and the known reference layer from the general weighted output-coupling multilayer network.The reduced dependency on full-state observability enables more deployment in engineering applications with partial measurements.Numerical simulations are conducted to validate the effectiveness of the proposed structure reconstruction method.展开更多
The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing te...The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing technology,which is expected to achieve effective vertical stimulation and commingled production across multiple pay zones.Under different geological and engineering conditions,the vertical propagation behavior of hydraulic fractures guided by radial boreholes can be determined by adjusting the interlayered lithologies and radial borehole configurations in experimental samples.Experimental results reveal four fracture network patterns:passivated,cross-layer,skip-layer,and hybrid fractures in the radial borehole fracturing.The radial boreholes perform better fracture guiding performances in the high-brittleness interlayers,which form cross-layer and hybrid fracture networks to improve the growth height.Hydraulic fractures tend to propagate from high-strength to low-strength layers under radial borehole guidance.When radial boreholes interconnect multiple lithology layers,hydraulic fractures initiate preferentially in lower-strength zones rather than remaining confined to borehole root ends.Increased radial borehole length and diameter facilitate fracture skip-layer initiation and cross-layer propagation,while multiple borehole branches enhance fracture penetration across high-strength interlayers.Radial boreholes with inclination angles below 30°enhance fracture height by generating cross-layer and hybrid fracture networks.Furthermore,an inter-borehole phase angle of less than 180°facilitates single-wing fracture cross-layer propagation.Fracture height is primarily governed by radial borehole length,followed by quantity,inclination angle,and diameter.Based on the geometric similarity criteria,the recommended parameters for radial borehole-assisted fracturing in a 5 1/2-inch horizontal well include a length>15 m,an inclination angle<30°,and a diameter>52 mm to ensure effective stimulation across three or more pay zones.Finally,the field-scale numerical model was developed to simulate the optimized radial borehole fracturing and demonstrate the technical superiority.These findings are expected to provide an in-depth understanding of the effective stimulation in multilayered reservoirs.展开更多
Electron doping has been established as an effective method to enhance the superconducting transition temperature and superconducting energy gap of FeSe thin films on strontium titanate(SrTiO_(3))substrates.Previous s...Electron doping has been established as an effective method to enhance the superconducting transition temperature and superconducting energy gap of FeSe thin films on strontium titanate(SrTiO_(3))substrates.Previous studies have demonstrated that electron/hole doping can be achieved through the adsorption of metal phthalocyanine(MPc,M=Co,Cu,Mn,Fe,and Ni)molecules on surfaces.This work explores the electron doping induced by the adsorption of MPc molecules,specifically cobalt phthalocyanine(CoPc)and copper phthalocyanine(CuPc),onto FeSe monolayer and multilayers.Utilizing first-principles calculations based on density functional theory,we demonstrate that charge rearrangement occurs when MPc molecules adsorb on the FeSe substrate,contributing to an accumulation of electrons at the interface.In the CoPc/FeSe systems,the electron accumulation increases with the layer number of FeSe substrate,converging for substrates with 3-5 layers.The analysis of the integrated planar charge difference up to the position with zero integrated charge transfer reveals that all the five MPc molecules donate electrons to the uppermost FeSe layer.The electron donation suggests that MPc adsorption can be a promising strategy to modulate the superconductivity of FeSe layers.展开更多
As the economy grows, environmental issues are becoming increasingly severe, making the promotion of green behavior more urgent. Information dissemination and policy regulation play crucial roles in influencing and am...As the economy grows, environmental issues are becoming increasingly severe, making the promotion of green behavior more urgent. Information dissemination and policy regulation play crucial roles in influencing and amplifying the spread of green behavior across society. To this end, a novel three-layer model in multilayer networks is proposed. In the novel model, the information layer describes green information spreading, the physical contact layer depicts green behavior propagation, and policy regulation is symbolized by an isolated node beneath the two layers. Then, we deduce the green behavior threshold for the three-layer model using the microscopic Markov chain approach. Moreover, subject to some individuals who are more likely to influence others or become green nodes and the limitations of the capacity of policy regulation, an optimal scheme is given that could optimize policy interventions to most effectively prompt green behavior.Subsequently, simulations are performed to validate the preciseness and theoretical results of the new model. It reveals that policy regulation can prompt the prevalence and outbreak of green behavior. Then, the green behavior is more likely to spread and be prevalent in the SF network than in the ER network. Additionally, optimal allocation is highly successful in facilitating the dissemination of green behavior. In practice, the optimal allocation strategy could prioritize interventions at critical nodes or regions, such as highly connected urban areas, where the impact of green behavior promotion would be most significant.展开更多
Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In orde...Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.展开更多
Exploiting high-performance absorption-dominant electromagnetic interference(EMI)shielding composites is urgently desired yet challenging for minimizing secondary electromagnetic radiation pollution.Herein,a nickel(Ni...Exploiting high-performance absorption-dominant electromagnetic interference(EMI)shielding composites is urgently desired yet challenging for minimizing secondary electromagnetic radiation pollution.Herein,a nickel(Ni)shell was in-situ grown on a copper nanowires(CuNWs)core to greatly improve the stability of CuNWs,while maintaining excellent electrical conductivity.Afterward,Ni nanowires/Ni@Cu nanowires/graphite paper/waterborne polyurethane(NiNWs/Ni@CuNWs/graphite paper/WPU,n Ni-m Ni@Cu-G)composite foams with the multilayered gradient architectures were fabricated by a facile multi-step freeze-casting method.In the resultant composite foams,the lowly conductive porous NiNWs/WPU layer plays a role as the impedance matching layer,the moderately conductive porous Ni@CuNWs/WPU layer acts as the transition layer,and the highly conductive graphite paper layer serves as the reflection layer.Arising from the rational layout of multilayered gradient magnetic-electrical networks,n Ni-m Ni@Cu-G foam holds the superior averaged total EMI shielding effectiveness(EMI SET)of 75.2 dB and optimal absorption coefficient(A)of 0.93 at the incident direction from NiNWs/WPU layer,suggesting the dominant absorption in EMI shielding mechanism and efficiently alleviating the secondary electromagnetic pollution.Furthermore,n Ni-m Ni@Cu-G foam also exhibits fascinating compressive properties with a compressive strength of 49.3 kPa,which is essential for its practical application.This multilayered gradient architecture design provides valuable insight into high-efficiently constructing absorption-dominant EMI shielding composites.展开更多
When detecting objects in Unmanned Aerial Vehicle(UAV)taken images,large number of objects and high proportion of small objects bring huge challenges for detection algorithms based on the You Only Look Once(YOLO)frame...When detecting objects in Unmanned Aerial Vehicle(UAV)taken images,large number of objects and high proportion of small objects bring huge challenges for detection algorithms based on the You Only Look Once(YOLO)framework,rendering them challenging to deal with tasks that demand high precision.To address these problems,this paper proposes a high-precision object detection algorithm based on YOLOv10s.Firstly,a Multi-branch Enhancement Coordinate Attention(MECA)module is proposed to enhance feature extraction capability.Secondly,a Multilayer Feature Reconstruction(MFR)mechanism is designed to fully exploit multilayer features,which can enrich object information as well as remove redundant information.Finally,an MFR Path Aggregation Network(MFR-Neck)is constructed,which integrates multi-scale features to improve the network's ability to perceive objects of var-ying sizes.The experimental results demonstrate that the proposed algorithm increases the average detection accuracy by 14.15%on the Vis Drone dataset compared to YOLOv10s,effectively enhancing object detection precision in UAV-taken images.展开更多
Molybdenum disulfide(MoS_(2)) is an emerging two-dimensional(2D) semiconductor and has great potential for highend applications beyond the traditional silicon-based electronics. Compared to the monolayers, multilayer ...Molybdenum disulfide(MoS_(2)) is an emerging two-dimensional(2D) semiconductor and has great potential for highend applications beyond the traditional silicon-based electronics. Compared to the monolayers, multilayer MoS_(2) has improved electron mobility and current density, and therefore provides a more promising platform in terms of thin-film transistors, flexible electronic devices, etc. However, the synthesis of large-area, high-quality multilayer MoS_(2) films with controlled layer number remains a challenge. Here, we develop a two-step oxygen-assisted chemical vapor deposition(OA-CVD) methodology for the synthesis of 4-inch MoS_(2) films from monolayer to trilayer on sapphire substrates. The influence of critical growth parameters on the growth of multilayer MoS_(2) is systematically explored, such as the evaporation temperature of MoO_(3) and the flow rate of O_(2). Flexible field-effect transistor(FET) devices fabricated from bilayer/trilayer MoS_(2) show substantial improvements in mobility compared with flexible FETs based on monolayer films.展开更多
The effects of accumulative hot rolling followed by solution treatment on the microstructural evolution and fracture behavior of 30CrMo/316L multilayered composites have been investigated.A scanning electron microscop...The effects of accumulative hot rolling followed by solution treatment on the microstructural evolution and fracture behavior of 30CrMo/316L multilayered composites have been investigated.A scanning electron microscope equipped with an electron backscatter diffraction probe,a laser confocal microscope,an electron probe microanalysis,and a universal testing machine were employed to characterize the microstructures and mechanical properties.The results indicate that solution treatment transformed the microstructure of the 30CrMo layer from ferrite to martensite,while the 316L layer remained austenitic but transitioned from the rolled to the recrystallized state.Additionally,solution treatment significantly enhanced the mechanical properties of the composite,leading to an increase in yield strength and ultimate tensile strength to 744 and 1106 MPa,respectively—258 and 276 MPa higher than those of the hot-rolled plate.The enhancement in strength is primarily attributed to the formation of high-strength martensite in the 30CrMo layer.During deformation,the composite interface effectively impeded crack propagation and induced step-like deflection.However,the formation of cross-layer grains facilitated crack nucleation at grain boundaries,leading to rapid crack propagation and instantaneous fracture.Therefore,preventing the formation of cross-layer grains during the heat treatment process is crucial,as their presence weakens the interfacial strengthening effect of the composite plate.This study provides valuable insights for the design and development of multi-layered steels.展开更多
Ti/TiN/Zr/ZrN multilayer coatings were deposited on Cr_17Ni_2 steel substrates with different surface roughnesses by vacuum cathodic arc deposition method. Microstructure, micro-hardness, adhesion strength and cross-s...Ti/TiN/Zr/ZrN multilayer coatings were deposited on Cr_17Ni_2 steel substrates with different surface roughnesses by vacuum cathodic arc deposition method. Microstructure, micro-hardness, adhesion strength and cross-sectional morphology of the obtained multilayer coatings were investigated. The results show that the Vickers hardness of Ti/TiN/Zr/ZrN multilayer coating, with a film thickness of 11.37 μm, is 29.36 GPa. The erosion and salt spray resistance performance of Cr_17Ni_2 steel substrates can be evidently improved by Ti/TiN/Zr/ZrN multilayer coating. The surface roughness of Cr_17Ni_2 steel substrates plays an important role in determining the mechanical and erosion performances of Ti/TiN/Zr/ZrN multilayer coatings. Overall, a low value of the surface roughness of substrates corresponds to an improved performance of erosion and salt spray resistance of multilayer coatings. The optimized performance of Ti/TiN/Zr/ZrN multilayer coatings can be achieved provided that the surface roughness of Cr_17Ni_2 steel substrates is lower than 0.4μm.展开更多
Nano-scaled ZrNbAlN films with different negative bias voltages（Vb） were deposited on bronze substrate and Si（100） wafers by a reactive unbalanced magnetron sputtering technique. Composition and structure properti...Nano-scaled ZrNbAlN films with different negative bias voltages（Vb） were deposited on bronze substrate and Si（100） wafers by a reactive unbalanced magnetron sputtering technique. Composition and structure properties were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. It is found that mole concentrations of Zr and Nb are affected by Vb, which leads to the increase of binding energy of N 1s and Al 2p and decrease of binding energy of Zr 3d5/2 and Nb 3d5/2. Surface morphologies evolution controlled by Vb could be observed. Furthermore, X-ray diffraction patterns reveal that these films show a（111） preferred orientation. Moreover, mechanical property and corrosion behavior of ZrNbAlN films were characterized by nanoindentation test and corrosion test, respectively. A maximum value of 21.85 GPa at-70 V occurs in the ZrNbAlN- bronze system, which outperforms uncoated bronze. Corrosion experiments in 0.5 mol/L NaCl and 0.5 mol/L HCl solution show that corrosion potential and corrosion current are dependent on Vb, and better anti-corrosion property could be obtained at-90 V.展开更多
Using the same conditions and various starting materials, such as lead acetate trihydrate, tetrabulyl titanate, zirconium n-butoxide, and acetylacetone, two kinds of solid precursors, lead zirconate titanate （PZT, Zr...Using the same conditions and various starting materials, such as lead acetate trihydrate, tetrabulyl titanate, zirconium n-butoxide, and acetylacetone, two kinds of solid precursors, lead zirconate titanate （PZT, Zr/Ti=15/85） and lead titanate （PT）, were fabricated. With three different combinations, namely, PZT, PT/PZT-PZT/PT, and PT/PZT/-/PZT/PT, three multilayer thin films were deposited on three Pt-Ti-Si3N4-SiO2-Si substrates by a modified sol-gel process. The fabrication process of the thin films is discussed in detail. We found that there is a large built-in stress in the thin film, which can be diminished by annealing at 600 ℃, when the gel is turned into solid material through drying and sintering. The Raman scattering spectra of the films with different compositions and structures were investigated. With the help of X-ray diffraction （XRD） analyzer and Raman scattering spectra analyzer, it was found that the thin films with the PT/PZT-PZT/PT structure have reasonable crystallinity and less residual stress. XRD testing shows that the diffraction pattern of the multilayer film results from the superimposition of the PZT and PT patterns. This leads to the conclusion that the PT/PZT-PZT/PT multilayer thin film has a promising future in pyroelectric infrared detectors with high performance.展开更多
文摘Magnetic properties and microstructure of Fe/RE multilayers(thickness of Fe single layers less than or equal to 2.0 nm) both as-deposited state and after annealing( T greater than or equal to 473 K) were studied, and the reason of the change of magnetic properties was analyzed. The Fe single layers are considered to be composed of insular Fe domains in as-deposited films. Super-paramagnetic nature of the Fe domains of small size causes the films to exhibit paramagnetism. During annealing the growth of Fe domains results in the transformation of films from paramagnetic into ferromagnetic, which leads to the increase in H-c and M-s.
基金Project supported by the National Natural Science Foun-dation of China(Grant No.62373197)the Natural Science Foundation of the Higher Education Institutions of Jiangsu Province,China(Grant No.23KJB120010)+1 种基金the Industry-University-Research Cooperation Project of Jiangsu Province,China(Grant No.BY20251038)the Cultivation and In-cubation Project of the College of Automation,Nanjing Uni-versity of Posts and Telecommunications.
文摘Multilayer complex dynamical networks,characterized by the intricate topological connections and diverse hierarchical structures,present significant challenges in determining complete structural configurations due to the unique functional attributes and interaction patterns inherent to different layers.This paper addresses the critical question of whether structural information from a known layer can be used to reconstruct the unknown intralayer structure of a target layer within general weighted output-coupling multilayer networks.Building upon the generalized synchronization principle,we propose an innovative reconstruction method that incorporates two essential components in the design of structure observers,the cross-layer coupling modulator and the structural divergence term.A key advantage of the proposed reconstruction method lies in its flexibility to freely designate both the unknown target layer and the known reference layer from the general weighted output-coupling multilayer network.The reduced dependency on full-state observability enables more deployment in engineering applications with partial measurements.Numerical simulations are conducted to validate the effectiveness of the proposed structure reconstruction method.
基金supported by the National Natural Science Foundation of China(Nos.U24B6001,52421002,52474016,and 52020105001)Research on Key Technologies for Exploration and Development of Dry Geothermal Resources(No.2022DJ5503)Deep-land National Science and Technology Major Project of China(No.2024ZD1003504).
文摘The strong vertical discontinuities pose a fundamental challenge to optimizing stimulated reservoir volume(SRV)in multilayered reservoirs.This research proposes a radial borehole-assisted horizontal well fracturing technology,which is expected to achieve effective vertical stimulation and commingled production across multiple pay zones.Under different geological and engineering conditions,the vertical propagation behavior of hydraulic fractures guided by radial boreholes can be determined by adjusting the interlayered lithologies and radial borehole configurations in experimental samples.Experimental results reveal four fracture network patterns:passivated,cross-layer,skip-layer,and hybrid fractures in the radial borehole fracturing.The radial boreholes perform better fracture guiding performances in the high-brittleness interlayers,which form cross-layer and hybrid fracture networks to improve the growth height.Hydraulic fractures tend to propagate from high-strength to low-strength layers under radial borehole guidance.When radial boreholes interconnect multiple lithology layers,hydraulic fractures initiate preferentially in lower-strength zones rather than remaining confined to borehole root ends.Increased radial borehole length and diameter facilitate fracture skip-layer initiation and cross-layer propagation,while multiple borehole branches enhance fracture penetration across high-strength interlayers.Radial boreholes with inclination angles below 30°enhance fracture height by generating cross-layer and hybrid fracture networks.Furthermore,an inter-borehole phase angle of less than 180°facilitates single-wing fracture cross-layer propagation.Fracture height is primarily governed by radial borehole length,followed by quantity,inclination angle,and diameter.Based on the geometric similarity criteria,the recommended parameters for radial borehole-assisted fracturing in a 5 1/2-inch horizontal well include a length>15 m,an inclination angle<30°,and a diameter>52 mm to ensure effective stimulation across three or more pay zones.Finally,the field-scale numerical model was developed to simulate the optimized radial borehole fracturing and demonstrate the technical superiority.These findings are expected to provide an in-depth understanding of the effective stimulation in multilayered reservoirs.
基金support from the National Natural Science Foundation of China(Grant No.62488201)the National Key Research and Development Program of China(Grant No.2022YFA1204100).
文摘Electron doping has been established as an effective method to enhance the superconducting transition temperature and superconducting energy gap of FeSe thin films on strontium titanate(SrTiO_(3))substrates.Previous studies have demonstrated that electron/hole doping can be achieved through the adsorption of metal phthalocyanine(MPc,M=Co,Cu,Mn,Fe,and Ni)molecules on surfaces.This work explores the electron doping induced by the adsorption of MPc molecules,specifically cobalt phthalocyanine(CoPc)and copper phthalocyanine(CuPc),onto FeSe monolayer and multilayers.Utilizing first-principles calculations based on density functional theory,we demonstrate that charge rearrangement occurs when MPc molecules adsorb on the FeSe substrate,contributing to an accumulation of electrons at the interface.In the CoPc/FeSe systems,the electron accumulation increases with the layer number of FeSe substrate,converging for substrates with 3-5 layers.The analysis of the integrated planar charge difference up to the position with zero integrated charge transfer reveals that all the five MPc molecules donate electrons to the uppermost FeSe layer.The electron donation suggests that MPc adsorption can be a promising strategy to modulate the superconductivity of FeSe layers.
基金Project supported by the National Natural Science Foundation of China (Grant No. 62371253)the Postgraduate Research and Practice Innovation Program of Jiangsu Province, China (Grant No. KYCX24_1179)。
文摘As the economy grows, environmental issues are becoming increasingly severe, making the promotion of green behavior more urgent. Information dissemination and policy regulation play crucial roles in influencing and amplifying the spread of green behavior across society. To this end, a novel three-layer model in multilayer networks is proposed. In the novel model, the information layer describes green information spreading, the physical contact layer depicts green behavior propagation, and policy regulation is symbolized by an isolated node beneath the two layers. Then, we deduce the green behavior threshold for the three-layer model using the microscopic Markov chain approach. Moreover, subject to some individuals who are more likely to influence others or become green nodes and the limitations of the capacity of policy regulation, an optimal scheme is given that could optimize policy interventions to most effectively prompt green behavior.Subsequently, simulations are performed to validate the preciseness and theoretical results of the new model. It reveals that policy regulation can prompt the prevalence and outbreak of green behavior. Then, the green behavior is more likely to spread and be prevalent in the SF network than in the ER network. Additionally, optimal allocation is highly successful in facilitating the dissemination of green behavior. In practice, the optimal allocation strategy could prioritize interventions at critical nodes or regions, such as highly connected urban areas, where the impact of green behavior promotion would be most significant.
基金the Shaanxi Provincial Key Research and Development Program(No.2020GY-040)。
文摘Design of a miniaturized lumped-element bandpass filter in multilayer liquid crystal polymer technology is proposed.Fractional bandwidth of the bandpass filter is 20%,operating at a center frequency of 500 MHz.In order to further reduce the size and improve the performance of the proposed filter,defected ground structure(DGS)has been implemented in the filter.Based on this structure,the volume of the inductor is reduced by 60%eficiently compared with the inductor without DGS,and the Q-factor is increased up to 257%compared with the traditional multilayer spiral inductor.The measured results indicate that the designed filter has a very sharp stopband,an insertion loss of 2.3dB,and a return loss of 18.6dB in the passband.The whole volume of the fabricated filter is 0.032入_(g)×0.05入_(g)×0.00075入_(g),where Ag is the guided wavelength of the center frequency.The proposed filter is easily integrated into radio-frequency/microwave circuitry at a low manufacturing cost,especially wireless communication.
基金supported by the National Natural Science Foundation of China(Nos.52363004,51963003,and 52263003)Guizhou Provincial Science and Technology Projects(No.ZK[2022]Maj019).
文摘Exploiting high-performance absorption-dominant electromagnetic interference(EMI)shielding composites is urgently desired yet challenging for minimizing secondary electromagnetic radiation pollution.Herein,a nickel(Ni)shell was in-situ grown on a copper nanowires(CuNWs)core to greatly improve the stability of CuNWs,while maintaining excellent electrical conductivity.Afterward,Ni nanowires/Ni@Cu nanowires/graphite paper/waterborne polyurethane(NiNWs/Ni@CuNWs/graphite paper/WPU,n Ni-m Ni@Cu-G)composite foams with the multilayered gradient architectures were fabricated by a facile multi-step freeze-casting method.In the resultant composite foams,the lowly conductive porous NiNWs/WPU layer plays a role as the impedance matching layer,the moderately conductive porous Ni@CuNWs/WPU layer acts as the transition layer,and the highly conductive graphite paper layer serves as the reflection layer.Arising from the rational layout of multilayered gradient magnetic-electrical networks,n Ni-m Ni@Cu-G foam holds the superior averaged total EMI shielding effectiveness(EMI SET)of 75.2 dB and optimal absorption coefficient(A)of 0.93 at the incident direction from NiNWs/WPU layer,suggesting the dominant absorption in EMI shielding mechanism and efficiently alleviating the secondary electromagnetic pollution.Furthermore,n Ni-m Ni@Cu-G foam also exhibits fascinating compressive properties with a compressive strength of 49.3 kPa,which is essential for its practical application.This multilayered gradient architecture design provides valuable insight into high-efficiently constructing absorption-dominant EMI shielding composites.
基金co-supported by the National Natural Science Foundation of China(No.62103190)the Natural Science Foundation of Jiangsu Province,China(No.BK20230923)。
文摘When detecting objects in Unmanned Aerial Vehicle(UAV)taken images,large number of objects and high proportion of small objects bring huge challenges for detection algorithms based on the You Only Look Once(YOLO)framework,rendering them challenging to deal with tasks that demand high precision.To address these problems,this paper proposes a high-precision object detection algorithm based on YOLOv10s.Firstly,a Multi-branch Enhancement Coordinate Attention(MECA)module is proposed to enhance feature extraction capability.Secondly,a Multilayer Feature Reconstruction(MFR)mechanism is designed to fully exploit multilayer features,which can enrich object information as well as remove redundant information.Finally,an MFR Path Aggregation Network(MFR-Neck)is constructed,which integrates multi-scale features to improve the network's ability to perceive objects of var-ying sizes.The experimental results demonstrate that the proposed algorithm increases the average detection accuracy by 14.15%on the Vis Drone dataset compared to YOLOv10s,effectively enhancing object detection precision in UAV-taken images.
基金Project supported by the National Key Research and Development Program of China (Grant No. 2021YFA1202900)the National Natural Science Foundation of China (Grant Nos. 12422402, 61888102, 12274447, and 62204166)+1 种基金Chinese Academy of Sciences Strategic Priority Research Program (Grant No. XDB067020302)Guangdong Major Project of Basic and Applied Basic Research (Grant No. 2021B0301030002)。
文摘Molybdenum disulfide(MoS_(2)) is an emerging two-dimensional(2D) semiconductor and has great potential for highend applications beyond the traditional silicon-based electronics. Compared to the monolayers, multilayer MoS_(2) has improved electron mobility and current density, and therefore provides a more promising platform in terms of thin-film transistors, flexible electronic devices, etc. However, the synthesis of large-area, high-quality multilayer MoS_(2) films with controlled layer number remains a challenge. Here, we develop a two-step oxygen-assisted chemical vapor deposition(OA-CVD) methodology for the synthesis of 4-inch MoS_(2) films from monolayer to trilayer on sapphire substrates. The influence of critical growth parameters on the growth of multilayer MoS_(2) is systematically explored, such as the evaporation temperature of MoO_(3) and the flow rate of O_(2). Flexible field-effect transistor(FET) devices fabricated from bilayer/trilayer MoS_(2) show substantial improvements in mobility compared with flexible FETs based on monolayer films.
基金supported by the National Key Research and Development Program of China(No.2018YFA0707304).
文摘The effects of accumulative hot rolling followed by solution treatment on the microstructural evolution and fracture behavior of 30CrMo/316L multilayered composites have been investigated.A scanning electron microscope equipped with an electron backscatter diffraction probe,a laser confocal microscope,an electron probe microanalysis,and a universal testing machine were employed to characterize the microstructures and mechanical properties.The results indicate that solution treatment transformed the microstructure of the 30CrMo layer from ferrite to martensite,while the 316L layer remained austenitic but transitioned from the rolled to the recrystallized state.Additionally,solution treatment significantly enhanced the mechanical properties of the composite,leading to an increase in yield strength and ultimate tensile strength to 744 and 1106 MPa,respectively—258 and 276 MPa higher than those of the hot-rolled plate.The enhancement in strength is primarily attributed to the formation of high-strength martensite in the 30CrMo layer.During deformation,the composite interface effectively impeded crack propagation and induced step-like deflection.However,the formation of cross-layer grains facilitated crack nucleation at grain boundaries,leading to rapid crack propagation and instantaneous fracture.Therefore,preventing the formation of cross-layer grains during the heat treatment process is crucial,as their presence weakens the interfacial strengthening effect of the composite plate.This study provides valuable insights for the design and development of multi-layered steels.
基金Project(2011B050400007)supported by the International Cooperation Program of Guangdong Province,China
文摘Ti/TiN/Zr/ZrN multilayer coatings were deposited on Cr_17Ni_2 steel substrates with different surface roughnesses by vacuum cathodic arc deposition method. Microstructure, micro-hardness, adhesion strength and cross-sectional morphology of the obtained multilayer coatings were investigated. The results show that the Vickers hardness of Ti/TiN/Zr/ZrN multilayer coating, with a film thickness of 11.37 μm, is 29.36 GPa. The erosion and salt spray resistance performance of Cr_17Ni_2 steel substrates can be evidently improved by Ti/TiN/Zr/ZrN multilayer coating. The surface roughness of Cr_17Ni_2 steel substrates plays an important role in determining the mechanical and erosion performances of Ti/TiN/Zr/ZrN multilayer coatings. Overall, a low value of the surface roughness of substrates corresponds to an improved performance of erosion and salt spray resistance of multilayer coatings. The optimized performance of Ti/TiN/Zr/ZrN multilayer coatings can be achieved provided that the surface roughness of Cr_17Ni_2 steel substrates is lower than 0.4μm.
基金Project(50725413)supported by the National Natural Science Foundation of ChinaProject(2010BB4290)supported by Natural Science Foundation Project of CQ CSTC,China
文摘Nano-scaled ZrNbAlN films with different negative bias voltages（Vb） were deposited on bronze substrate and Si（100） wafers by a reactive unbalanced magnetron sputtering technique. Composition and structure properties were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. It is found that mole concentrations of Zr and Nb are affected by Vb, which leads to the increase of binding energy of N 1s and Al 2p and decrease of binding energy of Zr 3d5/2 and Nb 3d5/2. Surface morphologies evolution controlled by Vb could be observed. Furthermore, X-ray diffraction patterns reveal that these films show a（111） preferred orientation. Moreover, mechanical property and corrosion behavior of ZrNbAlN films were characterized by nanoindentation test and corrosion test, respectively. A maximum value of 21.85 GPa at-70 V occurs in the ZrNbAlN- bronze system, which outperforms uncoated bronze. Corrosion experiments in 0.5 mol/L NaCl and 0.5 mol/L HCl solution show that corrosion potential and corrosion current are dependent on Vb, and better anti-corrosion property could be obtained at-90 V.
文摘Using the same conditions and various starting materials, such as lead acetate trihydrate, tetrabulyl titanate, zirconium n-butoxide, and acetylacetone, two kinds of solid precursors, lead zirconate titanate （PZT, Zr/Ti=15/85） and lead titanate （PT）, were fabricated. With three different combinations, namely, PZT, PT/PZT-PZT/PT, and PT/PZT/-/PZT/PT, three multilayer thin films were deposited on three Pt-Ti-Si3N4-SiO2-Si substrates by a modified sol-gel process. The fabrication process of the thin films is discussed in detail. We found that there is a large built-in stress in the thin film, which can be diminished by annealing at 600 ℃, when the gel is turned into solid material through drying and sintering. The Raman scattering spectra of the films with different compositions and structures were investigated. With the help of X-ray diffraction （XRD） analyzer and Raman scattering spectra analyzer, it was found that the thin films with the PT/PZT-PZT/PT structure have reasonable crystallinity and less residual stress. XRD testing shows that the diffraction pattern of the multilayer film results from the superimposition of the PZT and PT patterns. This leads to the conclusion that the PT/PZT-PZT/PT multilayer thin film has a promising future in pyroelectric infrared detectors with high performance.
