To clarify the importance of various influencing factors on asphalt pavement rutting deformation and determine a screening method of model indicators,the data of the RIOHTrack full-scale track were examined using the ...To clarify the importance of various influencing factors on asphalt pavement rutting deformation and determine a screening method of model indicators,the data of the RIOHTrack full-scale track were examined using the factor analysis method(FAM).Taking the standard test pavement structure of RIOHTrack as an example,four rutting influencing factors from different aspects were determined through statistical analysis.Furthermore,the common influencing factors among the rutting influencing factors were studied based on FAM.Results show that the common factor can well characterize accumulative ESALs,center-point deflection,and temperature,besides humidity,which indicates that these three influencing factors can have an important impact on rutting.Moreover,an empirical rutting prediction model was established based on the selected influencing factors,which proved to exhibit high prediction accuracy.These analysis results demonstrate that the FAM is an effective screening method for rutting prediction model indicators,which provides a reference for the selection of independent model indicators in other rutting prediction model research when used in other areas and is of great significance for the prediction and control of rutting distress.展开更多
Metals and metalloids（termed as metals in this article）are important constituent elements of the earth＇s crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined a...Metals and metalloids（termed as metals in this article）are important constituent elements of the earth＇s crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined as toxic metals.展开更多
In order to improve the precision of mining subsidence prediction, a mathematical model using Support Vector Machine （SVM） was established to calculate the displacement factor. The study is based on a comprehensive ...In order to improve the precision of mining subsidence prediction, a mathematical model using Support Vector Machine （SVM） was established to calculate the displacement factor. The study is based on a comprehensive analysis of factors affecting the displacement factor, such as mechanical properties of the cover rock, the ratio of mining depth to seam thickness, dip angle of the coal seam and the thickness of loose layer. Data of 63 typical observation stations were used as a training and testing sample set. A SVM regression model of the displacement factor and the factors affecting it was established with a kernel function, an insensitive loss factor and a properly selected penalty factor. Given an accurate calculation algorithm for testing and analysis, the results show that an SVM regression model can calcu- late displacement factor precisely and reliable precision can be obtained which meets engineering requirements. The experimental results show that the method to calculation of the displacement factor, based on the SVM method, is feasible. The many factors affecting the displacement factor can be consid- ered with this method. The research provides an efficient and accurate approach for the calculation of displacement in mining subsidence orediction.展开更多
The scientific assessment of ecosystem ser-vice value(ESV)plays a critical role in regional ecologi-cal protection and management,rational land use planning,and the establishment of ecological security barriers.The ec...The scientific assessment of ecosystem ser-vice value(ESV)plays a critical role in regional ecologi-cal protection and management,rational land use planning,and the establishment of ecological security barriers.The ecosystem service value of the Northeast Forest Belt from 2005 to 2020 was assessed,focusing on spatial–temporal changes and the driving forces behind these dynamics.Using multi-source data,the equivalent factor method,and geo-graphic detectors,we analyzed natural and socio-economic factors affecting the region.which was crucial for effective ecological conservation and land-use planning.Enhanced the effectiveness of policy formulation and land use plan-ning.The results show that the ESV of the Northeast Forest Belt exhibits an overall increasing trend from 2005 to 2020,with forests and wetlands contributing the most.However,there are significant differences between forest belts.Driven by natural and socio-economic factors,the ESV of forest belts in Heilongjiang and Jilin provinces showed significant growth.In contrast,the ESV of Forest Belts in Liaoning and Inner Mongolia of China remains relatively stable,but the spatial differentiation within these regions is characterized by significant clustering of high-value and low-value areas.Furthermore,climate regulation and hydrological regulation services were identified as the most important ecological functions in the Northeast Forest Belt,contributing greatly to regional ecological stability and human well-being.The ESV in the Northeast Forest Belt is improved during the study period,but the stability of the ecosystem is still chal-lenged by the dual impacts of natural and socio-economic factors.To further optimize regional land use planning and ecological protection policies,it is recommended to prior-itize the conservation of high-ESV areas,enhance ecological restoration efforts for wetlands and forests,and reasonably control the spatial layout of urban expansion and agricul-tural development.Additionally,this study highlights the importance of tailored ecological compensation policies and strategic land-use planning to balance environmental protec-tion and economic growth.展开更多
To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmental...To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmentally friendly soy protein isolate with methyl methacrylate.This dust suppressant could effectively control dust pollution in open cut coal mines. The optimized conditions for graft copolymerization in this case were determined by a response surface experiment designed with Design-Expert 10 software. Characterization by scanning electron microscopy showed a significant morphology change of the dust suppressant and the generation of a rigid and dense layer on its surface after interacting with coal dust.The layer exhibited good bonding and dust suppression performance. The analysis with Fourier-transform infrared spectroscopy revealed the appearance of new absorption peaks near 1300, 1072, and 1631 cm, demonstrating effective graft copolymerization. The proposed dust suppressant exhibited excellent wind erosion resistance, with a resistance that exceeded 90% at a wind speed of 6.5 m/sec. The successful graft copolymerization and effective bonding and curing of the dust suppressant on coal dust were experimentally verified.This is of great significance to the control of coal dust pollution.展开更多
The plane strain asymmetrical rolling was analyzed using slab method. The contact arc was replaced by parabola, and the constant surface friction status was adopted during the analysis. The deformation area was divide...The plane strain asymmetrical rolling was analyzed using slab method. The contact arc was replaced by parabola, and the constant surface friction status was adopted during the analysis. The deformation area was divided into three zones according to the direction of the friction. Then, the three zones were studied, respectively. A rolling force model and a rolling torque model were developed based on the analysis, and they were used to analyze the influ- ence of asymmetrical rolling factors on deformation area and unit pressure if they had good precision which was determined by comparing the calculated results with the measured ones.展开更多
A new fuzzy stochastic finite element method based on the fuzzy factor method and random factor method is given and the analysis of structural dynamic characteristic for fuzzy stochastic truss structures is presented....A new fuzzy stochastic finite element method based on the fuzzy factor method and random factor method is given and the analysis of structural dynamic characteristic for fuzzy stochastic truss structures is presented. Considering the fuzzy randomness of the structural physical parameters and geometric dimensions simultaneously, the structural stiffness and mass matrices axe constructed based on the fuzzy factor method and random factor method; from the Rayleigh＇s quotient of structural vibration, the structural fuzzy random dynamic characteristic is obtained by means of the interval arithmetic; the fuzzy numeric characteristics of dynamic characteristic axe then derived by using the random variable＇s moment function method and algebra synthesis method. Two examples axe used to illustrate the validity and rationality of the method given. The advantage of this method is that the effect of the fuzzy randomness of one of the structural parameters on the fuzzy randomness of the dynamic characteristic can be reflected expediently and objectively.展开更多
Seismic random vibration analysis of stochastic truss structures is presented.A new method called random factor method is used for dynamic analysis of structures with uncertain parameters,due to variability in their m...Seismic random vibration analysis of stochastic truss structures is presented.A new method called random factor method is used for dynamic analysis of structures with uncertain parameters,due to variability in their material properties and geometry.Using the random factor method,the natural frequencies and modeshapes of a stochastic structure can be respectively described by the product of two parts,corresponding to the random factors of the structural parameters with uncertainty,and deterministic values of the natural frequencies and modeshapes obtained by conventional finite element analysis.The stochastic truss structure is subjected to stationary or non-stationary random earthquake excitation.Computational expressions for the mean and standard deviation of the mean square displacement and mean square stress are developed by means of the random variable's functional moment method and the algebra synthesis method.An antenna and a truss bridge are used as practical engineering examples to illustrate the application of the random factor method in the seismic response analysis of random structures under stationary or non-stationary random earthquake excitation.展开更多
Based on energy equilibrium,a new procedure called the Membrane Factor Method is devel- oped to analyze the dynamic plastic response of plates with deflections in the range where both bending mo- ments and membrane fo...Based on energy equilibrium,a new procedure called the Membrane Factor Method is devel- oped to analyze the dynamic plastic response of plates with deflections in the range where both bending mo- ments and membrane forces are important.The final deflection of a simply -supported circular rigid-plastic plate loaded by a uniformly distributed impulse is obtained.In comparison with other approximate solutions, the present results are found to be simpler and in better agreement with the corresponding experimental values reoorded by Florence.展开更多
This paper is concerned with the inverse scattering problems for Schrdinger equations with compactly supported potentials.For purpose of reconstructing the support of the potential,we derive a factorization of the sca...This paper is concerned with the inverse scattering problems for Schrdinger equations with compactly supported potentials.For purpose of reconstructing the support of the potential,we derive a factorization of the scattering amplitude operator A and prove that the ranges of （A＊ A） ^1/4 and G which maps more general incident fields than plane waves into the scattering amplitude coincide.As an application we characterize the support of the potential using only the spectral data of the operator A.展开更多
The compact implicit integration factor （cIIF） method is an efficient time discretization scheme for stiff nonlinear diffusion equations in two and three spatial dimensions. In the current work, we apply the cIIF me...The compact implicit integration factor （cIIF） method is an efficient time discretization scheme for stiff nonlinear diffusion equations in two and three spatial dimensions. In the current work, we apply the cIIF method to some complex-valued nonlinear evolutionary equations such as the nonlinear SchrSdinger （NLS） equation and the complex Ginzburg-Landau （GL） equation. Detailed algorithm formulation and practical implementation of cIIF method are performed. The numerical results indicate that this method is very accurate and efficient.展开更多
In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface contai...In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface containing the obstacle and corresponding to infinitely many incident point sources also placed on the measurement surface. The obstacle is allowed to be an impenetrable scatterer or a penetrable scatterer. We establish the validity of the factorization method with the nearfield data to characterize the obstacle in the planar waveguide by constructing an outgoing-to-incoming operator which is an integral operator defined on the measurement surface with the kernel given in terms of an infinite series.展开更多
In the preliminary design stage of the full form ships, in order to obtain a hull form with low resistance and maximum propulsion efficiency, an optimization design program for a full form ship with the minimum thrust...In the preliminary design stage of the full form ships, in order to obtain a hull form with low resistance and maximum propulsion efficiency, an optimization design program for a full form ship with the minimum thrust deduction factor has been developed, which combined the potential flow theory and boundary layer theory with the optimization technique. In the optimization process, the Sequential Unconstrained Minimization Technique（SUMT） interior point method of Nonlinear Programming（NLP） was proposed with the minimum thrust deduction factor as the objective function. An appropriate displacement is a basic constraint condition, and the boundary layer separation is an additional one. The parameters of the hull form modification function are used as design variables. At last, the numerical optimization example for lines of after-body of 50000 DWT product oil tanker was provided, which indicated that the propulsion efficiency was improved distinctly by this optimal design method.展开更多
In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples...In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.展开更多
The scaled boundary finite element method （SBFEM） is a recently developed numerical method combining advantages of both finite element methods （FEM） and boundary element methods （BEM） and with its own special fe...The scaled boundary finite element method （SBFEM） is a recently developed numerical method combining advantages of both finite element methods （FEM） and boundary element methods （BEM） and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors （SIFs） directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.展开更多
The prediction of dynamic crack propagation in brittle materials is still an important issue in many engineering fields. The remeshing technique based on scaled boundary finite element method(SBFEM) is extended to pre...The prediction of dynamic crack propagation in brittle materials is still an important issue in many engineering fields. The remeshing technique based on scaled boundary finite element method(SBFEM) is extended to predict the dynamic crack propagation in brittle materials. The structure is firstly divided into a number of superelements, only the boundaries of which need to be discretized with line elements. In the SBFEM formulation, the stiffness and mass matrices of the super-elements can be coupled seamlessly with standard finite elements, thus the advantages of versatility and flexibility of the FEM are well maintained. The transient response of the structure can be calculated directly in the time domain using a standard time-integration scheme. Then the dynamic stress intensity factor(DSIF) during crack propagation can be solved analytically due to the semi-analytical nature of SBFEM. Only the fine mesh discretization for the crack-tip super-element is needed to ensure the required accuracy for the determination of stress intensity factor(SIF). According to the predicted crack-tip position, a simple remeshing algorithm with the minimum mesh changes is suggested to simulate the dynamic crack propagation. Numerical examples indicate that the proposed method can be effectively used to deal with the dynamic crack propagation in a finite sized rectangular plate including a central crack. Comparison is made with the results available in the literature, which shows good agreement between each other.展开更多
In this paper we try to introduce the ladder operators associated with the pseudoharmonic oscillator, after solving the corresponding Schrrdinger equation by using the factorization method. The obtained generalized ra...In this paper we try to introduce the ladder operators associated with the pseudoharmonic oscillator, after solving the corresponding Schrrdinger equation by using the factorization method. The obtained generalized raising and lowering operators naturally lead us to the Dirac representation space of the system which is much easier to work with, in comparison to the functional Hilbert space. The SU（1, 1） dynamical symmetry group associated with the considered system is exactly established through investigating the fact that the deduced operators satisfy appropriate commutation relations. This result enables us to construct two important and distinct classes of Barut-Girardello and Gilmore-Perelomov coherent states associated with the system. Finally, their identities as the most important task are exactly resolved and some of their nonclassical properties are illustrated, numerically.展开更多
Marine structures are frequently subjected to repeated impact loadings,resulting in failure of the structures,even causing serious accidents.The analytical expressions of dimensionless permanent deflection and impact ...Marine structures are frequently subjected to repeated impact loadings,resulting in failure of the structures,even causing serious accidents.The analytical expressions of dimensionless permanent deflection and impact force of a metal beam based on maximal normal yield surface are derived by membrane factor method(MFM),then the results are compared with repeated impact tests.It can be found that the solutions based on MFM are between the upper and lower bounds,and very close to the results of the repeated impact tests,indicating the theoretical model proposed can predict the plastic responses of the metal beam accurately.What’s more,the influences of impact location and boundary condition on the dynamic responses of the beam subjected to repeated impacts are determined.Results show that,as the distance of impact location from the middle span of the beam increases,the permanent deflection decreases,while the impact force increases.Meanwhile,the influences of impact location enhance as the impact number increases.When the permanent deflection is smaller than the thickness,the effect of boundary condition on the plastic responses is significant.However,when the deflection is larger than the thickness,the beam will be like a string and only axial force works,resulting in little influence of boundary condition on the plastic responses of the beam.展开更多
For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geomet...For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geometries may lead to difficulties in the accuracy when discretizing the high-order derivatives on grid points near the boundary.It is very challenging to design numerical methods that can efficiently and accurately handle both difficulties.Applying an implicit scheme may be able to remove the stability constraints on the time step,however,it usually requires solving a large global system of nonlinear equations for each time step,and the computational cost could be significant.Integration factor(IF)or exponential time differencing(ETD)methods are one of the popular methods for temporal partial differential equations(PDEs)among many other methods.In our paper,we couple ETD methods with an embedded boundary method to solve a system of reaction-diffusion equations with complex geometries.In particular,we rewrite all ETD schemes into a linear combination of specificФ-functions and apply one state-of-the-art algorithm to compute the matrix-vector multiplications,which offers significant computational advantages with adaptive Krylov subspaces.In addition,we extend this method by incorporating the level set method to solve the free boundary problem.The accuracy,stability,and efficiency of the developed method are demonstrated by numerical examples.展开更多
Based on the introduction of factors affecting the income level of farmers in China,a total of 31 provinces,autonomous regions and municipality cities are taken as samples to select 13 factors affecting the income lev...Based on the introduction of factors affecting the income level of farmers in China,a total of 31 provinces,autonomous regions and municipality cities are taken as samples to select 13 factors affecting the income level of farmers,which are arable land area(X1),disaster area(X2),effective irrigation area(X3),fertilizer application(X4),mobile phone(X5),personal computer(X6),people joining in the new rural cooperative medical care(X7),rural investment(X8),household-use machine(X9),agricultural product price(X10),proportion of labor force with above junior high school education(X11),rural delivery route(X12),and rural electricity consumption(X13).At the same time,factor analysis method is used to analyze the factors affecting the income level of farmers.Result shows that common factors affecting the income of farmers are the agricultural production factor F1,the expanded reproduction factor F2,the information use factor F3,and the output reduction factor F4.At present,education degree of farmers and ability of farmers in grasping information have relatively great impact on the income of farmers,and can effectively promote the income growth of farmers.Scores of F1 in Henan,Shandong and Hebei are generally higher;Jiangsu,Guangdong,Zhejiang and Shandong Provinces have relatively high scores of F2;Shanghai,Beijing and Guangdong have relatively high scores of F3;and Hunan,Hubei and Xinjiang have relatively high scores of F4.Finally,countermeasures are put forward to improve the income of farmers based on empirical study.展开更多
基金The National Key Research and Development Program of China(No.2018YFB1600300,2018YFB1600304,2018YFB1600305)Postgraduate Research&Practice Innovation Program of Jiangsu Province(No.KYCX21_0133)the Scientific Research Foundation of Graduate School of Southeast University.
文摘To clarify the importance of various influencing factors on asphalt pavement rutting deformation and determine a screening method of model indicators,the data of the RIOHTrack full-scale track were examined using the factor analysis method(FAM).Taking the standard test pavement structure of RIOHTrack as an example,four rutting influencing factors from different aspects were determined through statistical analysis.Furthermore,the common influencing factors among the rutting influencing factors were studied based on FAM.Results show that the common factor can well characterize accumulative ESALs,center-point deflection,and temperature,besides humidity,which indicates that these three influencing factors can have an important impact on rutting.Moreover,an empirical rutting prediction model was established based on the selected influencing factors,which proved to exhibit high prediction accuracy.These analysis results demonstrate that the FAM is an effective screening method for rutting prediction model indicators,which provides a reference for the selection of independent model indicators in other rutting prediction model research when used in other areas and is of great significance for the prediction and control of rutting distress.
文摘Metals and metalloids（termed as metals in this article）are important constituent elements of the earth＇s crust.A number of metals,if present in excess,are toxic to organisms and therefore they are usually defined as toxic metals.
基金the Research and Innovation Program for College and University Graduate Students in Jiangsu Province (No.CX10B_141Z)the National Natural Science Foundation of China (No.41071273) for support of this project
文摘In order to improve the precision of mining subsidence prediction, a mathematical model using Support Vector Machine （SVM） was established to calculate the displacement factor. The study is based on a comprehensive analysis of factors affecting the displacement factor, such as mechanical properties of the cover rock, the ratio of mining depth to seam thickness, dip angle of the coal seam and the thickness of loose layer. Data of 63 typical observation stations were used as a training and testing sample set. A SVM regression model of the displacement factor and the factors affecting it was established with a kernel function, an insensitive loss factor and a properly selected penalty factor. Given an accurate calculation algorithm for testing and analysis, the results show that an SVM regression model can calcu- late displacement factor precisely and reliable precision can be obtained which meets engineering requirements. The experimental results show that the method to calculation of the displacement factor, based on the SVM method, is feasible. The many factors affecting the displacement factor can be consid- ered with this method. The research provides an efficient and accurate approach for the calculation of displacement in mining subsidence orediction.
基金funded by the Central University D Project(HFW230600022)National Natural Science Foundation of China(71973021)+1 种基金National Natural Science Foundation Youth Funding Project(72003022)Heilongjiang Province University Think Tank Open Topic(ZKKF2022173).
文摘The scientific assessment of ecosystem ser-vice value(ESV)plays a critical role in regional ecologi-cal protection and management,rational land use planning,and the establishment of ecological security barriers.The ecosystem service value of the Northeast Forest Belt from 2005 to 2020 was assessed,focusing on spatial–temporal changes and the driving forces behind these dynamics.Using multi-source data,the equivalent factor method,and geo-graphic detectors,we analyzed natural and socio-economic factors affecting the region.which was crucial for effective ecological conservation and land-use planning.Enhanced the effectiveness of policy formulation and land use plan-ning.The results show that the ESV of the Northeast Forest Belt exhibits an overall increasing trend from 2005 to 2020,with forests and wetlands contributing the most.However,there are significant differences between forest belts.Driven by natural and socio-economic factors,the ESV of forest belts in Heilongjiang and Jilin provinces showed significant growth.In contrast,the ESV of Forest Belts in Liaoning and Inner Mongolia of China remains relatively stable,but the spatial differentiation within these regions is characterized by significant clustering of high-value and low-value areas.Furthermore,climate regulation and hydrological regulation services were identified as the most important ecological functions in the Northeast Forest Belt,contributing greatly to regional ecological stability and human well-being.The ESV in the Northeast Forest Belt is improved during the study period,but the stability of the ecosystem is still chal-lenged by the dual impacts of natural and socio-economic factors.To further optimize regional land use planning and ecological protection policies,it is recommended to prior-itize the conservation of high-ESV areas,enhance ecological restoration efforts for wetlands and forests,and reasonably control the spatial layout of urban expansion and agricul-tural development.Additionally,this study highlights the importance of tailored ecological compensation policies and strategic land-use planning to balance environmental protec-tion and economic growth.
基金supported by the National key R & D plan for the 13th five year plan (No. 2017YFC0805200)the Qingdao science and technology plan project (No.19-3-2-6-zhc)+1 种基金the Natural Science Foundation of Shandong Province (No. ZR2019MEE118)the National Natural Science Foundation of China (No. 51974179)。
文摘To relieve dust pollution in open cut coal mines and reduce the hazards of coal dust pollution to the environment and workers we optimized the synthesis of a dust suppressant by graft copolymerization of environmentally friendly soy protein isolate with methyl methacrylate.This dust suppressant could effectively control dust pollution in open cut coal mines. The optimized conditions for graft copolymerization in this case were determined by a response surface experiment designed with Design-Expert 10 software. Characterization by scanning electron microscopy showed a significant morphology change of the dust suppressant and the generation of a rigid and dense layer on its surface after interacting with coal dust.The layer exhibited good bonding and dust suppression performance. The analysis with Fourier-transform infrared spectroscopy revealed the appearance of new absorption peaks near 1300, 1072, and 1631 cm, demonstrating effective graft copolymerization. The proposed dust suppressant exhibited excellent wind erosion resistance, with a resistance that exceeded 90% at a wind speed of 6.5 m/sec. The successful graft copolymerization and effective bonding and curing of the dust suppressant on coal dust were experimentally verified.This is of great significance to the control of coal dust pollution.
基金Item Sponsored by National Natural Science Foundation of China (50104006)National Key Technology Research and Development Program of China(2006BAE03A08)
文摘The plane strain asymmetrical rolling was analyzed using slab method. The contact arc was replaced by parabola, and the constant surface friction status was adopted during the analysis. The deformation area was divided into three zones according to the direction of the friction. Then, the three zones were studied, respectively. A rolling force model and a rolling torque model were developed based on the analysis, and they were used to analyze the influ- ence of asymmetrical rolling factors on deformation area and unit pressure if they had good precision which was determined by comparing the calculated results with the measured ones.
基金Project supported by the Natural Science Foundation of Shaanxi Province of China (No,A200214)
文摘A new fuzzy stochastic finite element method based on the fuzzy factor method and random factor method is given and the analysis of structural dynamic characteristic for fuzzy stochastic truss structures is presented. Considering the fuzzy randomness of the structural physical parameters and geometric dimensions simultaneously, the structural stiffness and mass matrices axe constructed based on the fuzzy factor method and random factor method; from the Rayleigh＇s quotient of structural vibration, the structural fuzzy random dynamic characteristic is obtained by means of the interval arithmetic; the fuzzy numeric characteristics of dynamic characteristic axe then derived by using the random variable＇s moment function method and algebra synthesis method. Two examples axe used to illustrate the validity and rationality of the method given. The advantage of this method is that the effect of the fuzzy randomness of one of the structural parameters on the fuzzy randomness of the dynamic characteristic can be reflected expediently and objectively.
文摘Seismic random vibration analysis of stochastic truss structures is presented.A new method called random factor method is used for dynamic analysis of structures with uncertain parameters,due to variability in their material properties and geometry.Using the random factor method,the natural frequencies and modeshapes of a stochastic structure can be respectively described by the product of two parts,corresponding to the random factors of the structural parameters with uncertainty,and deterministic values of the natural frequencies and modeshapes obtained by conventional finite element analysis.The stochastic truss structure is subjected to stationary or non-stationary random earthquake excitation.Computational expressions for the mean and standard deviation of the mean square displacement and mean square stress are developed by means of the random variable's functional moment method and the algebra synthesis method.An antenna and a truss bridge are used as practical engineering examples to illustrate the application of the random factor method in the seismic response analysis of random structures under stationary or non-stationary random earthquake excitation.
基金The project supported by a fund from the National Educational Committee.
文摘Based on energy equilibrium,a new procedure called the Membrane Factor Method is devel- oped to analyze the dynamic plastic response of plates with deflections in the range where both bending mo- ments and membrane forces are important.The final deflection of a simply -supported circular rigid-plastic plate loaded by a uniformly distributed impulse is obtained.In comparison with other approximate solutions, the present results are found to be simpler and in better agreement with the corresponding experimental values reoorded by Florence.
基金The Major State Basic Research Development Program Grant (2005CB321701)the Heilongjiang Education Committee Grant (11551364) of China
文摘This paper is concerned with the inverse scattering problems for Schrdinger equations with compactly supported potentials.For purpose of reconstructing the support of the potential,we derive a factorization of the scattering amplitude operator A and prove that the ranges of （A＊ A） ^1/4 and G which maps more general incident fields than plane waves into the scattering amplitude coincide.As an application we characterize the support of the potential using only the spectral data of the operator A.
文摘The compact implicit integration factor （cIIF） method is an efficient time discretization scheme for stiff nonlinear diffusion equations in two and three spatial dimensions. In the current work, we apply the cIIF method to some complex-valued nonlinear evolutionary equations such as the nonlinear SchrSdinger （NLS） equation and the complex Ginzburg-Landau （GL） equation. Detailed algorithm formulation and practical implementation of cIIF method are performed. The numerical results indicate that this method is very accurate and efficient.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61421062 and 61520106004)the Microsoft Research Fund of Asia
文摘In this paper, we consider the inverse scattering problem of reconstructing a bounded obstacle in a three-dimensional planar waveguide from the scattered near-field data measured on a finite cylindrical surface containing the obstacle and corresponding to infinitely many incident point sources also placed on the measurement surface. The obstacle is allowed to be an impenetrable scatterer or a penetrable scatterer. We establish the validity of the factorization method with the nearfield data to characterize the obstacle in the planar waveguide by constructing an outgoing-to-incoming operator which is an integral operator defined on the measurement surface with the kernel given in terms of an infinite series.
基金financially supported by the National Natural Science Foundation of China(Grant No.51009087)
文摘In the preliminary design stage of the full form ships, in order to obtain a hull form with low resistance and maximum propulsion efficiency, an optimization design program for a full form ship with the minimum thrust deduction factor has been developed, which combined the potential flow theory and boundary layer theory with the optimization technique. In the optimization process, the Sequential Unconstrained Minimization Technique（SUMT） interior point method of Nonlinear Programming（NLP） was proposed with the minimum thrust deduction factor as the objective function. An appropriate displacement is a basic constraint condition, and the boundary layer separation is an additional one. The parameters of the hull form modification function are used as design variables. At last, the numerical optimization example for lines of after-body of 50000 DWT product oil tanker was provided, which indicated that the propulsion efficiency was improved distinctly by this optimal design method.
基金Supported by the Natural Basic Research Program of China(No.2005CB422207)the Fund of Eco-enviromental Impacts and Protection in Devoloping and Utilizing of Oil-shale Resources(No.OSR-01-06)
文摘In order to identify the day and night pollution sources of PM10 in ambient air in Longyan City,the authors analyzed the elemental composition of respirable particulate matters in the day and night ambient air samples and various pollution sources which were collected in January 2010 in Longyan with inductivity coupled plasma-mass spectrometry（ICP-MS）.Then chemical mass balance（CMB） model and factor analysis（FA） method were applied to comparatively study the inorganic components in the sources and receptor samples.The results of factor analysis show that the major sources were road dust,waste incineration and mixed sources which contained automobile exhaust,soil dust/secondary dust and coal dust during the daytime in Longyan City,China.There are two major sources of pollution which are soil dust and mixture sources of automobile exhaust and secondary dust during the night in Longyan.The results of CMB show that the major sources are secondary dust,automobile exhaust and road dust during the daytime in Longyan.The major sources are secondary dust,soil dust and automobile exhaust during the night in Longyan.The results of the two methods are similar to each other and the results will guide us to plan to control the PM10 pollution sources in Longyan.
基金The project supported by the National Natural Science Foundation of China (50579081)the Australian Research Council (DP0452681)The English text was polished by Keren Wang
文摘The scaled boundary finite element method （SBFEM） is a recently developed numerical method combining advantages of both finite element methods （FEM） and boundary element methods （BEM） and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors （SIFs） directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.
基金Supported by the Key Program of National Natural Science Foundation of China(No.51138001)the Science Fund for Creative Research Groups of National Natural Science Foundation of China(No.51121005)+2 种基金the Fundamental Research Funds for the Central Universities(DUT13LK16)the Young Scientists Fund of National Natural Science Foundation of China(No.51109134)China Postdoctoral Science Foundation(No.2011M500814)
文摘The prediction of dynamic crack propagation in brittle materials is still an important issue in many engineering fields. The remeshing technique based on scaled boundary finite element method(SBFEM) is extended to predict the dynamic crack propagation in brittle materials. The structure is firstly divided into a number of superelements, only the boundaries of which need to be discretized with line elements. In the SBFEM formulation, the stiffness and mass matrices of the super-elements can be coupled seamlessly with standard finite elements, thus the advantages of versatility and flexibility of the FEM are well maintained. The transient response of the structure can be calculated directly in the time domain using a standard time-integration scheme. Then the dynamic stress intensity factor(DSIF) during crack propagation can be solved analytically due to the semi-analytical nature of SBFEM. Only the fine mesh discretization for the crack-tip super-element is needed to ensure the required accuracy for the determination of stress intensity factor(SIF). According to the predicted crack-tip position, a simple remeshing algorithm with the minimum mesh changes is suggested to simulate the dynamic crack propagation. Numerical examples indicate that the proposed method can be effectively used to deal with the dynamic crack propagation in a finite sized rectangular plate including a central crack. Comparison is made with the results available in the literature, which shows good agreement between each other.
文摘In this paper we try to introduce the ladder operators associated with the pseudoharmonic oscillator, after solving the corresponding Schrrdinger equation by using the factorization method. The obtained generalized raising and lowering operators naturally lead us to the Dirac representation space of the system which is much easier to work with, in comparison to the functional Hilbert space. The SU（1, 1） dynamical symmetry group associated with the considered system is exactly established through investigating the fact that the deduced operators satisfy appropriate commutation relations. This result enables us to construct two important and distinct classes of Barut-Girardello and Gilmore-Perelomov coherent states associated with the system. Finally, their identities as the most important task are exactly resolved and some of their nonclassical properties are illustrated, numerically.
文摘Marine structures are frequently subjected to repeated impact loadings,resulting in failure of the structures,even causing serious accidents.The analytical expressions of dimensionless permanent deflection and impact force of a metal beam based on maximal normal yield surface are derived by membrane factor method(MFM),then the results are compared with repeated impact tests.It can be found that the solutions based on MFM are between the upper and lower bounds,and very close to the results of the repeated impact tests,indicating the theoretical model proposed can predict the plastic responses of the metal beam accurately.What’s more,the influences of impact location and boundary condition on the dynamic responses of the beam subjected to repeated impacts are determined.Results show that,as the distance of impact location from the middle span of the beam increases,the permanent deflection decreases,while the impact force increases.Meanwhile,the influences of impact location enhance as the impact number increases.When the permanent deflection is smaller than the thickness,the effect of boundary condition on the plastic responses is significant.However,when the deflection is larger than the thickness,the beam will be like a string and only axial force works,resulting in little influence of boundary condition on the plastic responses of the beam.
文摘For reaction-diffusion equations in irregular domains with moving boundaries,the numerical stability constraints from the reaction and diffusion terms often require very restricted time step sizes,while complex geometries may lead to difficulties in the accuracy when discretizing the high-order derivatives on grid points near the boundary.It is very challenging to design numerical methods that can efficiently and accurately handle both difficulties.Applying an implicit scheme may be able to remove the stability constraints on the time step,however,it usually requires solving a large global system of nonlinear equations for each time step,and the computational cost could be significant.Integration factor(IF)or exponential time differencing(ETD)methods are one of the popular methods for temporal partial differential equations(PDEs)among many other methods.In our paper,we couple ETD methods with an embedded boundary method to solve a system of reaction-diffusion equations with complex geometries.In particular,we rewrite all ETD schemes into a linear combination of specificФ-functions and apply one state-of-the-art algorithm to compute the matrix-vector multiplications,which offers significant computational advantages with adaptive Krylov subspaces.In addition,we extend this method by incorporating the level set method to solve the free boundary problem.The accuracy,stability,and efficiency of the developed method are demonstrated by numerical examples.
文摘Based on the introduction of factors affecting the income level of farmers in China,a total of 31 provinces,autonomous regions and municipality cities are taken as samples to select 13 factors affecting the income level of farmers,which are arable land area(X1),disaster area(X2),effective irrigation area(X3),fertilizer application(X4),mobile phone(X5),personal computer(X6),people joining in the new rural cooperative medical care(X7),rural investment(X8),household-use machine(X9),agricultural product price(X10),proportion of labor force with above junior high school education(X11),rural delivery route(X12),and rural electricity consumption(X13).At the same time,factor analysis method is used to analyze the factors affecting the income level of farmers.Result shows that common factors affecting the income of farmers are the agricultural production factor F1,the expanded reproduction factor F2,the information use factor F3,and the output reduction factor F4.At present,education degree of farmers and ability of farmers in grasping information have relatively great impact on the income of farmers,and can effectively promote the income growth of farmers.Scores of F1 in Henan,Shandong and Hebei are generally higher;Jiangsu,Guangdong,Zhejiang and Shandong Provinces have relatively high scores of F2;Shanghai,Beijing and Guangdong have relatively high scores of F3;and Hunan,Hubei and Xinjiang have relatively high scores of F4.Finally,countermeasures are put forward to improve the income of farmers based on empirical study.
