Elevation change monitoring of the Antarctic ice sheet has been a key issue in global change research.Satellite altimetry has been proven to be effective in detecting ice sheet variations. With the development of ICES...Elevation change monitoring of the Antarctic ice sheet has been a key issue in global change research.Satellite altimetry has been proven to be effective in detecting ice sheet variations. With the development of ICESat-2, many elevation observations can be used to derive elevation changes. However, the large amount of multitemporal data may include anomalous data points, increasing the uncertainty of the results. In this work, we improved the traditional repeat track method by introducing the Institute of Geodesy and Geophysics Ⅲ(IGGⅢ) method to obtain high-accuracy estimates of elevation change. The improved method was applied to analyze elevation changes along the transect from Zhongshan Station to Dome A in East Antarctica via ICESat-2 satellite altimetry data. The results show that the improved and traditional methods yield consistent numerical and spatial elevation change distributions. The elevation change calculated via the traditional method is 0.033 ± 0.131 m/yr, whereas the elevation change estimated via the IGGⅢ robust estimation method is 0.033 ± 0.109 m/yr from March 2019 to December 2021.In terms of spatial distribution, elevation changes in inland areas remain close to equilibrium, whereas regions with steeper ice sheet margins exhibit positive accumulation trends in elevation changes. The improved method reduces the standard error of the adjustment function from 0.975 to 0.691 m/yr. The improvement is particularly remarkable in the area between 72°S and 77°S. The results demonstrate that the IGGⅢ method effectively reduces errors caused by the inclusion of anomalous data and maintains the high data utilization rate of repeat-orbit methods.展开更多
Background: Biological maturation refers to the progressive process through which individuals transition toward an adult state during growth and development. To address the challenges posed by differences in biologica...Background: Biological maturation refers to the progressive process through which individuals transition toward an adult state during growth and development. To address the challenges posed by differences in biological maturity and the limitations of existing testing methods, particularly in adolescent sports contexts, there is a pressing need for a non-invasive method that is convenient, accurate, and broadly applicable to monitor the biological maturity of adolescent athletes comprehensively. In response to this need, a maturity assessment method based on the smartphone application Maturo has been developed. This study evaluates the accuracy and validity of the Maturo software, an automated tool for estimating biological age and related maturation metrics.Methods: A sample of 103 actively training teenage athletes aged 9-17 years. The sample included 76 males(age = 11.74 ± 1.55 years, mean ±SD) and 27 females(age = 13.95 ± 1.40 years), all without medical conditions that might impact growth or development.Results: Compared to traditional expert evaluations, the intraclass correlation coefficients(ICCs) and Pearson correlation coefficients demonstrated reliable positive correlations and significant agreement between the Maturo software and expert methods across multiple metrics, such as biological age(ICC = 0.965, R = 0.97), corrected biological age(ICC = 0.973, R = 0.99), predicted adult height(ICC = 0.991, R = 0.99), and percentage of adult height achieved(ICC = 0.955, R = 0.97). The Bland-Altman plots provided additional evidence of the validity of the Maturo software estimations, showing low systematic error in most measures. The linear regression analysis produced excellent adjusted R2values: 0.95for biological age and 0.99 for anticipated adult height. The Maturo approach demonstrated a high level of dependability in classifying teenagers into groups based on their maturity status and timing. The κ coefficients of 0.93 for maturity status and 0.82 for maturity timing indicate a nearly perfect agreement with the expert technique.Conclusion: While the Maturo software's non-invasive nature, cost-effectiveness, and ease of use could make it a potential tool for regular monitoring of growth and maturation in young athletes, its promising results in assessing maturation should be interpreted with caution due to limitations such as sample size and demographic constraints. Further longitude research with larger and more diverse populations is needed to validate these preliminary findings and strengthen the evidence for its broader applicability.展开更多
Axle box bearings serve as crucial components within the transmission system of high-speed trains.Their failure can directly impact the operational safety of these trains.Accurately determining the dynamic load experi...Axle box bearings serve as crucial components within the transmission system of high-speed trains.Their failure can directly impact the operational safety of these trains.Accurately determining the dynamic load experienced by bearings during the operation of high-speed trains can provide valuable boundary inputs for the study of bearing fatigue life and service performance,thereby holding significant engineering implications.In this study,we propose a high-speed train axle box bearing load estimation method(FMCC-DKF).This method is founded on the Kalman filtering technique of the Maximum Correntropy Criterion(MCC)and employs dummy measurement technology to enhance the stability of estimated loads.We develop a kernel size update algorithm to address the challenges associated with obtaining the key parameter,kernel size of MCC.Comparative analysis of the vertical and lateral loads of the axle box bearing obtained using FMCC-DKF,DKF,and AMCC-DKF,under both measurement noise-free and non-Gaussian noise conditions,is conducted to demonstrate the superiority of the proposed estimation method.The results indicate that the proposed FMCC-DKF method exhibits high estimation accuracy under both measurement noise-free and non-Gaussian noise interference,and maintains its high estimation accuracy despite changes in train speed.The proposed load estimation method demonstrates reliable performance within the low-frequency domain below 70 Hz.展开更多
Tungsten is considered the most promising plasma-facing material for fusion reactors with exceptional performance.Under certain conditions,activated tungsten dust can be generated through plasma–wall interactions and...Tungsten is considered the most promising plasma-facing material for fusion reactors with exceptional performance.Under certain conditions,activated tungsten dust can be generated through plasma–wall interactions and released into the atmosphere.Activated tungsten migrates downward in the soil after atmospheric deposition.However,effective methods for evaluating the environmental dose of gamma rays emitted by activated tungsten are still lacking.Consequently,a method for evaluating the air-absorbed dose rate of activated tungsten dust was proposed considering soil attenuation.Key parameters including the mass attenuation coefficient and energy absorption build-up factor were determined for the main gamma ray energies of radionuclides within the activated tungsten dust.Additionally,air-absorbed dose rates were calculated by assuming that radioactive sources were located at different soil depths and radii.It was found that a soil depth of 50 cm significantly attenuated the environmental dose by 99.9%,whereas the air-absorbed dose rates within the horizontal distance of 500 cm accounted for 91%of the total dose rate.Therefore,this study underscored the importance of soil attenuation in environmental dose assessments,which must be carefully re-examined for the safety analysis of fusion reactors.展开更多
The distribution of the sediment material storage quantity along the debris flow channels(SMSQ_DFC)can provide a foundation for runoffgenerated debris flow prediction or susceptibility assessment.Current models for es...The distribution of the sediment material storage quantity along the debris flow channels(SMSQ_DFC)can provide a foundation for runoffgenerated debris flow prediction or susceptibility assessment.Current models for estimating SMSQ_DFC do not consider the capacity of the channel cross-section to accommodate sediment materials.This accommodation condition serves as a limiting factor in determining whether the expected surplus of sediment materials can ultimately be stored.To address this issue,a mass-conservative index was used to represent the balance of deposit materials at any cross-section,considering the influx from upstream,outflux to downstream,and accommodation capacity.Based on this index,a new model for estimating SMSQ_DFC was developed and subsequently evaluated.The evaluation results show that the model meets the accuracy requirements with average error rates of 14.06%for self-validation and 14.81%for generalization ability validation.To assess its practical applications,the model was applied to the Yeniu Gully in Wenchuan County,Sichuan Province,an area with detailed field survey data.The results show that the model exhibits a commendable performance.Compared to traditional theoretical and semi-theoretical statistical models,our model is easier to use(input parameters can be obtained using Geographic Information Systems(GIS)).The modeling parameters chosen in this study have more theoretical significance than those used in existing purely statistical models,offering more effective technical support for estimating SMSQ_DFC.展开更多
In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to ...In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.展开更多
Convex feasibility problems are widely used in image reconstruction,sparse signal recovery,and other areas.This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery...Convex feasibility problems are widely used in image reconstruction,sparse signal recovery,and other areas.This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery.We rst derive the projection formulas for a vector onto the feasible sets.The centralized circumcentered-reection method is designed to solve the convex feasibility problem.Some numerical experiments demonstrate the feasibility and e ectiveness of the proposed algorithm,showing superior performance compared to conventional alternating projection methods.展开更多
Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The t...Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.展开更多
Combined with current specifications and stress characteristics of concrete filled steel tubular （CFST） arch bridges, the determination principle of safe-middle-failure threestage mode is given. Accordingly, damage ...Combined with current specifications and stress characteristics of concrete filled steel tubular （CFST） arch bridges, the determination principle of safe-middle-failure threestage mode is given. Accordingly, damage probability and failure probability and the corresponding reliability indices are calculated; a direct relationship between reliability indices and three-stage working status is made. Based on the three-stage working mode, a combined FNM （finite element-neural network- Monte-Carlo simulation） method is put forward to estimate the reliability of existing bridges. According to time-dependent reliability theory, subsequent service time is divided into several stages; minimum samples required by the Monte-Carlo method are generated by random sampling; training samples are calculated by the finite element method, and the training samples are extended by the neural network; failure probability and damage probability are calculated by the Monte-Carlo method. Thus, time dependent reliability indices are obtained, and the working status is judged. A case study is investigated to estimate the reliability of an actual bridge by the FNM method. The bridge is a CFST arch bridge with an 83.6 m span and it has been in operation for 10 years. According to analysis results, in the tenth year, the example bridge is still in safe status. This conclusion is consistent with the facts, which proves the feasibility of the FNM method for estimating the reliability of existing bridges.展开更多
The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate est...The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate estimation of SOCD in Karst areas is essential for carbon sequestration assessment in China. In this study, a modified method,which considers the vertical proportion of soil area in the profile when calculating the SOCD, was developed to estimate the SOCD in a typical Karst peak-cluster depression area in southwest China. In the modified method, ground-penetrating radar(GPR) technology was used to detect the distribution and thickness of soil. The accuracy of the method was confirmed through comparison with the data obtained using a validation method, in which the soil thickness was measured by excavation. In comparison with the conventional method and average-soil-depth method,the SOCD estimated using the GPR method showed the minimum relative error with respect to that obtained using the validation method. At a regional scale, the average SOCDs at depths of 0-20 cm and 0-100 cm, which were interpolated by ordinary kriging,were 1.49(ranging from 0.03-5.65) and 2.26(0.09-11.60) kgm-2based on GPR method in our study area(covering 393.6 hm2), respectively. Therefore, the modified method can be applied on the accurate estimation of SOCD in discontinuous soil areas such as Karst regions.展开更多
During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envel...During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.展开更多
A third-order correction was recently suggested to improve the accuracy of the half-power bandwidth method in estimating the damping of single DOF systems.This paper analyzes the accuracy of the half-power bandwidth m...A third-order correction was recently suggested to improve the accuracy of the half-power bandwidth method in estimating the damping of single DOF systems.This paper analyzes the accuracy of the half-power bandwidth method with the third-order correction in damping estimation for multi-DOF linear systems.Damping ratios in a two-DOF linear system are estimated using its displacement and acceleration frequency response curves,respectively.A wide range of important parameters that characterize the shape of these response curves are taken into account.Results show that the third-order correction may greatly improve the accuracy of the half-power bandwidth method in estimating damping in a two-DOF system.In spite of this,the half-power bandwidth method may significantly overestimate the damping ratios of two-DOF systems in some cases.展开更多
Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Qu...Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Quaternary rocks and is located in the Central Iran zone. According to the presence of signs of gold mineralization in this area, it is necessary to identify important mineral areas in this area. Therefore, finding information is necessary about the relationship and monitoring the elements of gold, arsenic, and antimony relative to each other in this area to determine the extent of geochemical halos and to estimate the grade. Therefore, a well-known and useful K-means method is used for monitoring the elements in the present study, this is a clustering method based on minimizing the total Euclidean distances of each sample from the center of the classes which are assigned to them. In this research, the clustering quality function and the utility rate of the sample have been used in the desired cluster (S(i)) to determine the optimum number of clusters. Finally, with regard to the cluster centers and the results, the equations were used to predict the amount of the gold element based on four parameters of arsenic and antimony grade, length and width of sampling points.展开更多
The existing research of steering efficiency mainly focuses on the mechanism efficiency of steering system, aiming at designing and optimizing the mechanism of steering system. In the development of assist steering sy...The existing research of steering efficiency mainly focuses on the mechanism efficiency of steering system, aiming at designing and optimizing the mechanism of steering system. In the development of assist steering system especially the evaluation of its comfort, the steering efficiency of driver physiological output usually are not considered, because this physiological output is difficult to measure or to estimate, and the objective evaluation of steering comfort therefore cannot be conducted with movement efficiency perspective. In order to take a further step to the objective evaluation of steering comfort, an estimating method for the steering efficiency of the driver was developed based on the research of the relationship between the steering force and muscle activity. First, the steering forces in the steering wheel plane and the electromyography （EMG） signals of the primary muscles were measured. These primary muscles are the muscles in shoulder and upper ann which mainly produced the steering torque, and their functions in steering maneuver were identified previously. Next, based on the multiple regressions of the steering force and EMG signals, both the effective steering force and the total force capacity of driver in steering maneuver were calculated. Finally, the steering efficiency of driver was estimated by means of the estimated effective force and the total force capacity, which represented the information of driver physiological output of the primary muscles. This research develops a novel estimating method for driver steering efficiency of driver physiological output, including the estimation of both steering force and the force capacity of primary muscles with EMG signals, and will benefit to evaluate the steering comfort with an objective perspective.展开更多
This paper presents a refined method for estimating the annual extreme wave heights at a coastal or offshore project site on the basis of the data acquired at some nearby routine hydrographic stations. This method is ...This paper presents a refined method for estimating the annual extreme wave heights at a coastal or offshore project site on the basis of the data acquired at some nearby routine hydrographic stations. This method is based on the orthogonality principle in linear mean square estimation of stochastic processes. The error of the method is analyzed and compared with that of the conventional method. It is found that the method is able to effectively reduce the error so long as some feasible measures are adopted. A simulated test of the method has been conducted in a large scale wind wave flume. The test results are in good agreement with those given by theoretical error analysis. A scheme to implement the method is proposed on the basis of error analysis. The scheme is so designed as to reduce the estimation error as far as possible. This method is also suitable to utilizing satellite wave data for the estimation.展开更多
Based on the meteorological data from 1951 to 2015 in Beijing,the reference crop evapotranspiration(ET_0)in Beijing was estimated using the FAO 56 Penman-Monteith method,the FAO PPP-17 Penman method,the Hargreaves met...Based on the meteorological data from 1951 to 2015 in Beijing,the reference crop evapotranspiration(ET_0)in Beijing was estimated using the FAO 56 Penman-Monteith method,the FAO PPP-17 Penman method,the Hargreaves method,and the Priestley-Taylor method.The results showed that the monthly and annual changing trends of ET0 estimated by the four methods are basically the same.In general,the ET0 values estimated by the Hargreaves method are the closest to those of the standard method FAO 56 Penman-Monteith,while the difference between the FAO PPP-17 Penman method and the standard method is the biggest.The Hargreaves method is the most suitable method for the estimation of ET0 in Beijing.展开更多
According to the Doppler sensitive of the phase coded pulse compression signal, a Doppler estimating and compensating method based on phase is put forward to restrain the Doppler sidelobes, raise the signal-to-noise r...According to the Doppler sensitive of the phase coded pulse compression signal, a Doppler estimating and compensating method based on phase is put forward to restrain the Doppler sidelobes, raise the signal-to-noise ratio and improve measuring resolution. The compensation method is used to decompose the echo to amplitude and phase, and then compose the new compensated echo by the amplitude and the nonlinear component of the phase. Furthermore the linear component of the phase can be used to estimate the Doppler frequency shift. The computer simulation and the real data processing show that the method has accurately estimated the Doppler frequency shift, successfully restrained the energy leakage on spectrum, greatly increased the echo signal-to-noise ratio and improved the detection performance of the radio system in both time domain and frequency domain.展开更多
The Hansen solubility parameters(HSP)are frequently used for solvent selection and characterization of polymers,and are directly related to the suspension behavior of pigments in solvent mixtures.The performance of cu...The Hansen solubility parameters(HSP)are frequently used for solvent selection and characterization of polymers,and are directly related to the suspension behavior of pigments in solvent mixtures.The performance of currently available group contribution(GC)methods for HSP were evaluated and found to be insufficient for computer-aided product design(CAPD)of paints and coatings.A revised and,for this purpose,improved GC method is presented for estimating HSP of organic compounds,intended for organic pigments.Due to the significant limitations of GC methods,an uncertainty analysis and parameter confidence intervals are provided in order to better quantify the estimation accuracy of the proposed approach.Compared to other applicable GC methods,the prediction error is reduced significantly with average absolute errors of 0.45 MPa^(1/2),1.35 MPa^(1/2),and 1.09 MPa^(1/2) for the partial dispersion(δD),polar(δP)and hydrogen-bonding(δH)solubility parameters respectively for a database of 1106 compounds.The performance for organic pigments is comparable to the overall method performance,with higher average errors forδD and lower average errors forδP andδH.展开更多
It is important to estimate the Signal-to-Noise Ratio(SNR) of unknown emitter signal accurately.In order to resolve the disadvantages of present algorithm,a novel method is proposed in this letter.We extract and norma...It is important to estimate the Signal-to-Noise Ratio(SNR) of unknown emitter signal accurately.In order to resolve the disadvantages of present algorithm,a novel method is proposed in this letter.We extract and normalize the information of zero frequency of received signal by the Wigner-Vile Distribution(WVD) transformation and then get the approximate power of original signal by mathematic transformation,at last,we get the estimate value of SNR by the known account formula of SNR.Simulation results show that it is correct and feasible.展开更多
基金supported by the National Key Research and Development Program of China under grant number 2023YFC2809103the Fundamental Research Funds for the Central Universities under grant numbers 2042022kf1204, 2042022kf1069, 2042023gf0012, 2042022dx0001+1 种基金the Hubei Provincial Natural Science Foundation of China under grant number 2022CFB081the State Key Laboratory of Geodesy and Earth's Dynamics, Innovation Academy for Precision Measurement Science and Technology under grant number SKLGED2023-2-6
文摘Elevation change monitoring of the Antarctic ice sheet has been a key issue in global change research.Satellite altimetry has been proven to be effective in detecting ice sheet variations. With the development of ICESat-2, many elevation observations can be used to derive elevation changes. However, the large amount of multitemporal data may include anomalous data points, increasing the uncertainty of the results. In this work, we improved the traditional repeat track method by introducing the Institute of Geodesy and Geophysics Ⅲ(IGGⅢ) method to obtain high-accuracy estimates of elevation change. The improved method was applied to analyze elevation changes along the transect from Zhongshan Station to Dome A in East Antarctica via ICESat-2 satellite altimetry data. The results show that the improved and traditional methods yield consistent numerical and spatial elevation change distributions. The elevation change calculated via the traditional method is 0.033 ± 0.131 m/yr, whereas the elevation change estimated via the IGGⅢ robust estimation method is 0.033 ± 0.109 m/yr from March 2019 to December 2021.In terms of spatial distribution, elevation changes in inland areas remain close to equilibrium, whereas regions with steeper ice sheet margins exhibit positive accumulation trends in elevation changes. The improved method reduces the standard error of the adjustment function from 0.975 to 0.691 m/yr. The improvement is particularly remarkable in the area between 72°S and 77°S. The results demonstrate that the IGGⅢ method effectively reduces errors caused by the inclusion of anomalous data and maintains the high data utilization rate of repeat-orbit methods.
文摘Background: Biological maturation refers to the progressive process through which individuals transition toward an adult state during growth and development. To address the challenges posed by differences in biological maturity and the limitations of existing testing methods, particularly in adolescent sports contexts, there is a pressing need for a non-invasive method that is convenient, accurate, and broadly applicable to monitor the biological maturity of adolescent athletes comprehensively. In response to this need, a maturity assessment method based on the smartphone application Maturo has been developed. This study evaluates the accuracy and validity of the Maturo software, an automated tool for estimating biological age and related maturation metrics.Methods: A sample of 103 actively training teenage athletes aged 9-17 years. The sample included 76 males(age = 11.74 ± 1.55 years, mean ±SD) and 27 females(age = 13.95 ± 1.40 years), all without medical conditions that might impact growth or development.Results: Compared to traditional expert evaluations, the intraclass correlation coefficients(ICCs) and Pearson correlation coefficients demonstrated reliable positive correlations and significant agreement between the Maturo software and expert methods across multiple metrics, such as biological age(ICC = 0.965, R = 0.97), corrected biological age(ICC = 0.973, R = 0.99), predicted adult height(ICC = 0.991, R = 0.99), and percentage of adult height achieved(ICC = 0.955, R = 0.97). The Bland-Altman plots provided additional evidence of the validity of the Maturo software estimations, showing low systematic error in most measures. The linear regression analysis produced excellent adjusted R2values: 0.95for biological age and 0.99 for anticipated adult height. The Maturo approach demonstrated a high level of dependability in classifying teenagers into groups based on their maturity status and timing. The κ coefficients of 0.93 for maturity status and 0.82 for maturity timing indicate a nearly perfect agreement with the expert technique.Conclusion: While the Maturo software's non-invasive nature, cost-effectiveness, and ease of use could make it a potential tool for regular monitoring of growth and maturation in young athletes, its promising results in assessing maturation should be interpreted with caution due to limitations such as sample size and demographic constraints. Further longitude research with larger and more diverse populations is needed to validate these preliminary findings and strengthen the evidence for its broader applicability.
基金National Key R&D Program of China(Grant numbers 2022YFB4301201-11,2022YFB4301203-05)National Natural Science Foundation of China(Grant number 52202464).
文摘Axle box bearings serve as crucial components within the transmission system of high-speed trains.Their failure can directly impact the operational safety of these trains.Accurately determining the dynamic load experienced by bearings during the operation of high-speed trains can provide valuable boundary inputs for the study of bearing fatigue life and service performance,thereby holding significant engineering implications.In this study,we propose a high-speed train axle box bearing load estimation method(FMCC-DKF).This method is founded on the Kalman filtering technique of the Maximum Correntropy Criterion(MCC)and employs dummy measurement technology to enhance the stability of estimated loads.We develop a kernel size update algorithm to address the challenges associated with obtaining the key parameter,kernel size of MCC.Comparative analysis of the vertical and lateral loads of the axle box bearing obtained using FMCC-DKF,DKF,and AMCC-DKF,under both measurement noise-free and non-Gaussian noise conditions,is conducted to demonstrate the superiority of the proposed estimation method.The results indicate that the proposed FMCC-DKF method exhibits high estimation accuracy under both measurement noise-free and non-Gaussian noise interference,and maintains its high estimation accuracy despite changes in train speed.The proposed load estimation method demonstrates reliable performance within the low-frequency domain below 70 Hz.
基金supported by the National Natural Science Foundation of China(No.12375314)。
文摘Tungsten is considered the most promising plasma-facing material for fusion reactors with exceptional performance.Under certain conditions,activated tungsten dust can be generated through plasma–wall interactions and released into the atmosphere.Activated tungsten migrates downward in the soil after atmospheric deposition.However,effective methods for evaluating the environmental dose of gamma rays emitted by activated tungsten are still lacking.Consequently,a method for evaluating the air-absorbed dose rate of activated tungsten dust was proposed considering soil attenuation.Key parameters including the mass attenuation coefficient and energy absorption build-up factor were determined for the main gamma ray energies of radionuclides within the activated tungsten dust.Additionally,air-absorbed dose rates were calculated by assuming that radioactive sources were located at different soil depths and radii.It was found that a soil depth of 50 cm significantly attenuated the environmental dose by 99.9%,whereas the air-absorbed dose rates within the horizontal distance of 500 cm accounted for 91%of the total dose rate.Therefore,this study underscored the importance of soil attenuation in environmental dose assessments,which must be carefully re-examined for the safety analysis of fusion reactors.
基金supported by Geological Disaster Patterns and Mitigation Strategies Under River-Reservoir Hydrodynamics in the Three Gorges Reservoir Fluctuation Zone(5000002024CC20004)the National Key Research and Development Program of China(2023YFC3007205)+1 种基金the National Natural Science Foundation of China(No.42271013)the West Light Foundation of the Chinese Academy of Sciences.
文摘The distribution of the sediment material storage quantity along the debris flow channels(SMSQ_DFC)can provide a foundation for runoffgenerated debris flow prediction or susceptibility assessment.Current models for estimating SMSQ_DFC do not consider the capacity of the channel cross-section to accommodate sediment materials.This accommodation condition serves as a limiting factor in determining whether the expected surplus of sediment materials can ultimately be stored.To address this issue,a mass-conservative index was used to represent the balance of deposit materials at any cross-section,considering the influx from upstream,outflux to downstream,and accommodation capacity.Based on this index,a new model for estimating SMSQ_DFC was developed and subsequently evaluated.The evaluation results show that the model meets the accuracy requirements with average error rates of 14.06%for self-validation and 14.81%for generalization ability validation.To assess its practical applications,the model was applied to the Yeniu Gully in Wenchuan County,Sichuan Province,an area with detailed field survey data.The results show that the model exhibits a commendable performance.Compared to traditional theoretical and semi-theoretical statistical models,our model is easier to use(input parameters can be obtained using Geographic Information Systems(GIS)).The modeling parameters chosen in this study have more theoretical significance than those used in existing purely statistical models,offering more effective technical support for estimating SMSQ_DFC.
基金Supported in part by Natural Science Foundation of Guangxi(2023GXNSFAA026246)in part by the Central Government's Guide to Local Science and Technology Development Fund(GuikeZY23055044)in part by the National Natural Science Foundation of China(62363003)。
文摘In this paper,we consider the maximal positive definite solution of the nonlinear matrix equation.By using the idea of Algorithm 2.1 in ZHANG(2013),a new inversion-free method with a stepsize parameter is proposed to obtain the maximal positive definite solution of nonlinear matrix equation X+A^(*)X|^(-α)A=Q with the case 0<α≤1.Based on this method,a new iterative algorithm is developed,and its convergence proof is given.Finally,two numerical examples are provided to show the effectiveness of the proposed method.
基金Supported by the Natural Science Foundation of Guangxi Province(Grant Nos.2023GXNSFAA026067,2024GXN SFAA010521)the National Natural Science Foundation of China(Nos.12361079,12201149,12261026).
文摘Convex feasibility problems are widely used in image reconstruction,sparse signal recovery,and other areas.This paper is devoted to considering a class of convex feasibility problem arising from sparse signal recovery.We rst derive the projection formulas for a vector onto the feasible sets.The centralized circumcentered-reection method is designed to solve the convex feasibility problem.Some numerical experiments demonstrate the feasibility and e ectiveness of the proposed algorithm,showing superior performance compared to conventional alternating projection methods.
基金Supported by the National Natural Science Foundation of China under Grant No.51975138the High-Tech Ship Scientific Research Project from the Ministry of Industry and Information Technology under Grant No.CJ05N20the National Defense Basic Research Project under Grant No.JCKY2023604C006.
文摘Marine thin plates are susceptible to welding deformation owing to their low structural stiffness.Therefore,the efficient and accurate prediction of welding deformation is essential for improving welding quality.The traditional thermal elastic-plastic finite element method(TEP-FEM)can accurately predict welding deformation.However,its efficiency is low because of the complex nonlinear transient computation,making it difficult to meet the needs of rapid engineering evaluation.To address this challenge,this study proposes an efficient prediction method for welding deformation in marine thin plate butt welds.This method is based on the coupled temperature gradient-thermal strain method(TG-TSM)that integrates inherent strain theory with a shell element finite element model.The proposed method first extracts the distribution pattern and characteristic value of welding-induced inherent strain through TEP-FEM analysis.This strain is then converted into the equivalent thermal load applied to the shell element model for rapid computation.The proposed method-particularly,the gradual temperature gradient-thermal strain method(GTG-TSM)-achieved improved computational efficiency and consistent precision.Furthermore,the proposed method required much less computation time than the traditional TEP-FEM.Thus,this study lays the foundation for future prediction of welding deformation in more complex marine thin plates.
基金The National Natural Science Foundation of China(No.10672060)
文摘Combined with current specifications and stress characteristics of concrete filled steel tubular （CFST） arch bridges, the determination principle of safe-middle-failure threestage mode is given. Accordingly, damage probability and failure probability and the corresponding reliability indices are calculated; a direct relationship between reliability indices and three-stage working status is made. Based on the three-stage working mode, a combined FNM （finite element-neural network- Monte-Carlo simulation） method is put forward to estimate the reliability of existing bridges. According to time-dependent reliability theory, subsequent service time is divided into several stages; minimum samples required by the Monte-Carlo method are generated by random sampling; training samples are calculated by the finite element method, and the training samples are extended by the neural network; failure probability and damage probability are calculated by the Monte-Carlo method. Thus, time dependent reliability indices are obtained, and the working status is judged. A case study is investigated to estimate the reliability of an actual bridge by the FNM method. The bridge is a CFST arch bridge with an 83.6 m span and it has been in operation for 10 years. According to analysis results, in the tenth year, the example bridge is still in safe status. This conclusion is consistent with the facts, which proves the feasibility of the FNM method for estimating the reliability of existing bridges.
基金supported by National Science and Technology Support Project (Grant No. 2012BAD05B03–6)Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No. XDA05070403)National Natural Science Foundationof China (Grant No. 41171246)
文摘The conventional method which assumes the soil distribution is continuous was unsuitable for estimating soil organic carbon density(SOCD) in Karst areas because of its discontinuous soil distribution. The accurate estimation of SOCD in Karst areas is essential for carbon sequestration assessment in China. In this study, a modified method,which considers the vertical proportion of soil area in the profile when calculating the SOCD, was developed to estimate the SOCD in a typical Karst peak-cluster depression area in southwest China. In the modified method, ground-penetrating radar(GPR) technology was used to detect the distribution and thickness of soil. The accuracy of the method was confirmed through comparison with the data obtained using a validation method, in which the soil thickness was measured by excavation. In comparison with the conventional method and average-soil-depth method,the SOCD estimated using the GPR method showed the minimum relative error with respect to that obtained using the validation method. At a regional scale, the average SOCDs at depths of 0-20 cm and 0-100 cm, which were interpolated by ordinary kriging,were 1.49(ranging from 0.03-5.65) and 2.26(0.09-11.60) kgm-2based on GPR method in our study area(covering 393.6 hm2), respectively. Therefore, the modified method can be applied on the accurate estimation of SOCD in discontinuous soil areas such as Karst regions.
基金supported by Aviation Science Foundation of China (No. 20100251006)the Technological Foundation Project (No. J132012C001)
文摘During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.
基金National Natural Science Foundation under Grant No. 51179093National Basic Research Program of China under Grant No. 2011CB013602Program for New Century Excellent Talents in University under Grant No.NCET-10-0531
文摘A third-order correction was recently suggested to improve the accuracy of the half-power bandwidth method in estimating the damping of single DOF systems.This paper analyzes the accuracy of the half-power bandwidth method with the third-order correction in damping estimation for multi-DOF linear systems.Damping ratios in a two-DOF linear system are estimated using its displacement and acceleration frequency response curves,respectively.A wide range of important parameters that characterize the shape of these response curves are taken into account.Results show that the third-order correction may greatly improve the accuracy of the half-power bandwidth method in estimating damping in a two-DOF system.In spite of this,the half-power bandwidth method may significantly overestimate the damping ratios of two-DOF systems in some cases.
文摘Tarq geochemical 1:100,000 Sheet is located in Isfahan province which is investigated by Iran’s Geological and Explorations Organization using stream sediment analyzes. This area has stratigraphy of Precambrian to Quaternary rocks and is located in the Central Iran zone. According to the presence of signs of gold mineralization in this area, it is necessary to identify important mineral areas in this area. Therefore, finding information is necessary about the relationship and monitoring the elements of gold, arsenic, and antimony relative to each other in this area to determine the extent of geochemical halos and to estimate the grade. Therefore, a well-known and useful K-means method is used for monitoring the elements in the present study, this is a clustering method based on minimizing the total Euclidean distances of each sample from the center of the classes which are assigned to them. In this research, the clustering quality function and the utility rate of the sample have been used in the desired cluster (S(i)) to determine the optimum number of clusters. Finally, with regard to the cluster centers and the results, the equations were used to predict the amount of the gold element based on four parameters of arsenic and antimony grade, length and width of sampling points.
基金Supported by National Natural Science Foundation of China(Grant No.51005133)National Hi-tech Research and Development Program of China(863 Program,Grant No.2011AA11A244)Special Financial Grant of National Science Foundation for Post-doctoral Scientists of China(Grant No.201104098)
文摘The existing research of steering efficiency mainly focuses on the mechanism efficiency of steering system, aiming at designing and optimizing the mechanism of steering system. In the development of assist steering system especially the evaluation of its comfort, the steering efficiency of driver physiological output usually are not considered, because this physiological output is difficult to measure or to estimate, and the objective evaluation of steering comfort therefore cannot be conducted with movement efficiency perspective. In order to take a further step to the objective evaluation of steering comfort, an estimating method for the steering efficiency of the driver was developed based on the research of the relationship between the steering force and muscle activity. First, the steering forces in the steering wheel plane and the electromyography （EMG） signals of the primary muscles were measured. These primary muscles are the muscles in shoulder and upper ann which mainly produced the steering torque, and their functions in steering maneuver were identified previously. Next, based on the multiple regressions of the steering force and EMG signals, both the effective steering force and the total force capacity of driver in steering maneuver were calculated. Finally, the steering efficiency of driver was estimated by means of the estimated effective force and the total force capacity, which represented the information of driver physiological output of the primary muscles. This research develops a novel estimating method for driver steering efficiency of driver physiological output, including the estimation of both steering force and the force capacity of primary muscles with EMG signals, and will benefit to evaluate the steering comfort with an objective perspective.
文摘This paper presents a refined method for estimating the annual extreme wave heights at a coastal or offshore project site on the basis of the data acquired at some nearby routine hydrographic stations. This method is based on the orthogonality principle in linear mean square estimation of stochastic processes. The error of the method is analyzed and compared with that of the conventional method. It is found that the method is able to effectively reduce the error so long as some feasible measures are adopted. A simulated test of the method has been conducted in a large scale wind wave flume. The test results are in good agreement with those given by theoretical error analysis. A scheme to implement the method is proposed on the basis of error analysis. The scheme is so designed as to reduce the estimation error as far as possible. This method is also suitable to utilizing satellite wave data for the estimation.
基金Supported by National Natural Science Foundation of China(41371065)
文摘Based on the meteorological data from 1951 to 2015 in Beijing,the reference crop evapotranspiration(ET_0)in Beijing was estimated using the FAO 56 Penman-Monteith method,the FAO PPP-17 Penman method,the Hargreaves method,and the Priestley-Taylor method.The results showed that the monthly and annual changing trends of ET0 estimated by the four methods are basically the same.In general,the ET0 values estimated by the Hargreaves method are the closest to those of the standard method FAO 56 Penman-Monteith,while the difference between the FAO PPP-17 Penman method and the standard method is the biggest.The Hargreaves method is the most suitable method for the estimation of ET0 in Beijing.
基金supported partly by the National Natural Science Foundation of China(40804042)the Post DoctorFoundation of China(20070420919).
文摘According to the Doppler sensitive of the phase coded pulse compression signal, a Doppler estimating and compensating method based on phase is put forward to restrain the Doppler sidelobes, raise the signal-to-noise ratio and improve measuring resolution. The compensation method is used to decompose the echo to amplitude and phase, and then compose the new compensated echo by the amplitude and the nonlinear component of the phase. Furthermore the linear component of the phase can be used to estimate the Doppler frequency shift. The computer simulation and the real data processing show that the method has accurately estimated the Doppler frequency shift, successfully restrained the energy leakage on spectrum, greatly increased the echo signal-to-noise ratio and improved the detection performance of the radio system in both time domain and frequency domain.
基金Financial support from the Sino-Danish Center for Education and Research(SDC)the Hempel Foundation to CoaST(The Hempel Foundation Coatings Science and Technology Centre)Hempel A/S。
文摘The Hansen solubility parameters(HSP)are frequently used for solvent selection and characterization of polymers,and are directly related to the suspension behavior of pigments in solvent mixtures.The performance of currently available group contribution(GC)methods for HSP were evaluated and found to be insufficient for computer-aided product design(CAPD)of paints and coatings.A revised and,for this purpose,improved GC method is presented for estimating HSP of organic compounds,intended for organic pigments.Due to the significant limitations of GC methods,an uncertainty analysis and parameter confidence intervals are provided in order to better quantify the estimation accuracy of the proposed approach.Compared to other applicable GC methods,the prediction error is reduced significantly with average absolute errors of 0.45 MPa^(1/2),1.35 MPa^(1/2),and 1.09 MPa^(1/2) for the partial dispersion(δD),polar(δP)and hydrogen-bonding(δH)solubility parameters respectively for a database of 1106 compounds.The performance for organic pigments is comparable to the overall method performance,with higher average errors forδD and lower average errors forδP andδH.
文摘It is important to estimate the Signal-to-Noise Ratio(SNR) of unknown emitter signal accurately.In order to resolve the disadvantages of present algorithm,a novel method is proposed in this letter.We extract and normalize the information of zero frequency of received signal by the Wigner-Vile Distribution(WVD) transformation and then get the approximate power of original signal by mathematic transformation,at last,we get the estimate value of SNR by the known account formula of SNR.Simulation results show that it is correct and feasible.
