Ga-doped Li_(7)La_(3)Zr_(2)O_(12)(Ga-LLZO)has long been considered as a promising garnet-type electrolyte candidate for all-solid-state lithium metal batteries(ASSLBs)due to its high room temperature ionic conductivit...Ga-doped Li_(7)La_(3)Zr_(2)O_(12)(Ga-LLZO)has long been considered as a promising garnet-type electrolyte candidate for all-solid-state lithium metal batteries(ASSLBs)due to its high room temperature ionic conductivity.However,the typical synthesis of Ga-LLZO is usually accompanied by the formation of undesired LiGaO_(2) impurity phase that causes severe instability of the electrolyte in contact with molten Li metal during half/full cell assembly.In this study,we show that by simply engineering the defect chemistry of Ga-LLZO,namely,the lithium deficiency level,LiGaO_(2) impurity phase is effectively inhibited in the final synthetic product.Consequently,defect chemistry engineered Ga-LLZO exhibits excellent electrochemical stability against lithium metal,while its high room temperature ionic conductivity(~1.9×10^(-3)S·cm^(-1))is well reserved.The assembled Li/Ga-LLZO/Li symmetric cell has a superior critical current density of 0.9 mA·cm^(-2),and cycles stably for 500 hours at a current density of 0.3 mA·cm^(-2).This research facilitates the potential commercial applications of high performance Ga-LLZO solid electrolytes in ASSLBs.展开更多
The author puts forward a proposal for developing chemistry and chemical engineering of China’s salt lakes on the basis of an investigation into exploitation and utilization of salt lake resources all over the world....The author puts forward a proposal for developing chemistry and chemical engineering of China’s salt lakes on the basis of an investigation into exploitation and utilization of salt lake resources all over the world. It contains the subjects of setting up an engineering research center, mainly developing leading products, giving priority to the development of a chemical industry by using Qinghai salt lake resources, actively popularizing results, stressing basic research and systematic management.展开更多
Synthesis of macromolecular systems with precise structural and functional control constitutes a fundamental challenge for materials science and engineering. Development of the ability to construct complex bio-macromo...Synthesis of macromolecular systems with precise structural and functional control constitutes a fundamental challenge for materials science and engineering. Development of the ability to construct complex bio-macromolecular architectures provides a solution to this challenge. The past few years have witnessed the emergence of a new category of peptide-protein chemistry which can covalently stitch together protein]peptide molecules with high specificity under mild physiological conditions. It has thus inspired the concept of genetically encoded click chemistry （GECC）. As a prototype of GECC, SpyTag/ SpyCatcher chemistry has enabled the precise synthesis ofmacromolecules both in vitro and in vivo, exerting precise control over the fundamental properties of these macromolecules including length, sequence, stereochemistry and topology and leading to the creation of diverse biomaterials for a variety of applications. We thus anticipate a potential toolbox of GECC comprising multiple mutually orthogonal, covalent-bond forming peptide-protein reactive pairs with diverse features, which shall bridge synthetic biology and materials science and open up enormous opportunities for biomaterialsin the future.展开更多
A kind of Levextrel resin separation process was developed for separation ofindium (III), gallium (III), and zinc (II) from aqueous sulfate solution with Levextrel resincontaining di(2-ethylhexyl) phosphoric acid (CL-...A kind of Levextrel resin separation process was developed for separation ofindium (III), gallium (III), and zinc (II) from aqueous sulfate solution with Levextrel resincontaining di(2-ethylhexyl) phosphoric acid (CL-P 204). The aim of the research is to collectpreliminary results for a pilot-scale production. Properties of adsorbing indium (III), gallium(III), and zinc (II) from sulfate solution with the Levextrel resin were first studied by batchoperation and column operation. The optimum pH, adsorption capacities and concentrations ofstripping agents for indium (III), gallium (III) were tested. The separation order of indium (III),gallium (III), and zinc (II) from sulfate solution with CL-P 204 Levextrel resin was found thatindium (III) could be first separated by adsorbing at the acidity of 1.0 mol/L whereas gallium (III)and zinc (II) could not, and they were adsorbed together by adsorbing at pH =2.8, then separatedfrom each other by stripping with 0.1 and 0.5 mol/L hydrochloric acid, respectively. The recoveriesof three metal ions were all higher than 99 percent. The cyclic properties of this resin are well.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant No.52171221)the National Key Research and Development Program of China (Grant No.2019YFA0704900)。
文摘Ga-doped Li_(7)La_(3)Zr_(2)O_(12)(Ga-LLZO)has long been considered as a promising garnet-type electrolyte candidate for all-solid-state lithium metal batteries(ASSLBs)due to its high room temperature ionic conductivity.However,the typical synthesis of Ga-LLZO is usually accompanied by the formation of undesired LiGaO_(2) impurity phase that causes severe instability of the electrolyte in contact with molten Li metal during half/full cell assembly.In this study,we show that by simply engineering the defect chemistry of Ga-LLZO,namely,the lithium deficiency level,LiGaO_(2) impurity phase is effectively inhibited in the final synthetic product.Consequently,defect chemistry engineered Ga-LLZO exhibits excellent electrochemical stability against lithium metal,while its high room temperature ionic conductivity(~1.9×10^(-3)S·cm^(-1))is well reserved.The assembled Li/Ga-LLZO/Li symmetric cell has a superior critical current density of 0.9 mA·cm^(-2),and cycles stably for 500 hours at a current density of 0.3 mA·cm^(-2).This research facilitates the potential commercial applications of high performance Ga-LLZO solid electrolytes in ASSLBs.
文摘The author puts forward a proposal for developing chemistry and chemical engineering of China’s salt lakes on the basis of an investigation into exploitation and utilization of salt lake resources all over the world. It contains the subjects of setting up an engineering research center, mainly developing leading products, giving priority to the development of a chemical industry by using Qinghai salt lake resources, actively popularizing results, stressing basic research and systematic management.
基金financial supports from the Research Grants Council of Hong Kong SAR Government to F. Sun (RGC-ECS Nos. #26103915 and Ao E/M-09/12)the 863 Program (No. 2015AA020941)+2 种基金the National Natural Science Foundation of China (Nos. 21474003, 91427304)"1000 Plan (Youth)"the Department of Chemical and Biological Engineering, HKUST for the faculty start-up fund
文摘Synthesis of macromolecular systems with precise structural and functional control constitutes a fundamental challenge for materials science and engineering. Development of the ability to construct complex bio-macromolecular architectures provides a solution to this challenge. The past few years have witnessed the emergence of a new category of peptide-protein chemistry which can covalently stitch together protein]peptide molecules with high specificity under mild physiological conditions. It has thus inspired the concept of genetically encoded click chemistry （GECC）. As a prototype of GECC, SpyTag/ SpyCatcher chemistry has enabled the precise synthesis ofmacromolecules both in vitro and in vivo, exerting precise control over the fundamental properties of these macromolecules including length, sequence, stereochemistry and topology and leading to the creation of diverse biomaterials for a variety of applications. We thus anticipate a potential toolbox of GECC comprising multiple mutually orthogonal, covalent-bond forming peptide-protein reactive pairs with diverse features, which shall bridge synthetic biology and materials science and open up enormous opportunities for biomaterialsin the future.
文摘A kind of Levextrel resin separation process was developed for separation ofindium (III), gallium (III), and zinc (II) from aqueous sulfate solution with Levextrel resincontaining di(2-ethylhexyl) phosphoric acid (CL-P 204). The aim of the research is to collectpreliminary results for a pilot-scale production. Properties of adsorbing indium (III), gallium(III), and zinc (II) from sulfate solution with the Levextrel resin were first studied by batchoperation and column operation. The optimum pH, adsorption capacities and concentrations ofstripping agents for indium (III), gallium (III) were tested. The separation order of indium (III),gallium (III), and zinc (II) from sulfate solution with CL-P 204 Levextrel resin was found thatindium (III) could be first separated by adsorbing at the acidity of 1.0 mol/L whereas gallium (III)and zinc (II) could not, and they were adsorbed together by adsorbing at pH =2.8, then separatedfrom each other by stripping with 0.1 and 0.5 mol/L hydrochloric acid, respectively. The recoveriesof three metal ions were all higher than 99 percent. The cyclic properties of this resin are well.
