This study was aimed to prepare landslide susceptibility maps for the Pithoragarh district in Uttarakhand,India,using advanced ensemble models that combined Radial Basis Function Networks(RBFN)with three ensemble lear...This study was aimed to prepare landslide susceptibility maps for the Pithoragarh district in Uttarakhand,India,using advanced ensemble models that combined Radial Basis Function Networks(RBFN)with three ensemble learning techniques:DAGGING(DG),MULTIBOOST(MB),and ADABOOST(AB).This combination resulted in three distinct ensemble models:DG-RBFN,MB-RBFN,and AB-RBFN.Additionally,a traditional weighted method,Information Value(IV),and a benchmark machine learning(ML)model,Multilayer Perceptron Neural Network(MLP),were employed for comparison and validation.The models were developed using ten landslide conditioning factors,which included slope,aspect,elevation,curvature,land cover,geomorphology,overburden depth,lithology,distance to rivers and distance to roads.These factors were instrumental in predicting the output variable,which was the probability of landslide occurrence.Statistical analysis of the models’performance indicated that the DG-RBFN model,with an Area Under ROC Curve(AUC)of 0.931,outperformed the other models.The AB-RBFN model achieved an AUC of 0.929,the MB-RBFN model had an AUC of 0.913,and the MLP model recorded an AUC of 0.926.These results suggest that the advanced ensemble ML model DG-RBFN was more accurate than traditional statistical model,single MLP model,and other ensemble models in preparing trustworthy landslide susceptibility maps,thereby enhancing land use planning and decision-making.展开更多
Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening pa...Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.展开更多
Objective:To evaluate the value of rehabilitation nursing based on mind mapping model combined with psychological intervention for patients with nephrotic syndrome(NS).Methods:A total of 60 patients with NS who visite...Objective:To evaluate the value of rehabilitation nursing based on mind mapping model combined with psychological intervention for patients with nephrotic syndrome(NS).Methods:A total of 60 patients with NS who visited our hospital from January 2024 to December 2024 were selected as samples and randomly divided into groups.The observation group received rehabilitation nursing based on the mind mapping model combined with psychological intervention,while the control group received routine intervention.The differences in emotional scores,self-care ability scores,compliance,and complications were compared between the two groups.Results:The anxiety(SAS)and depression(SDS)scores of the observation group were lower than those of the control group,while the self-care ability scale(ESCA)score was higher than that of the control group(P<0.05).The compliance rate of the observation group was higher than that of the control group(P<0.05).The complication rate of NS in the observation group was lower than that in the control group(P<0.05).Conclusion:Rehabilitation nursing based on the mind mapping model combined with psychological intervention can enhance self-care ability,reduce negative emotions,and reduce complications in NS nursing,which is efficient and feasible.展开更多
Landslide susceptibility mapping(LSM)plays a crucial role in assessing geological risks.The current LSM techniques face a significant challenge in achieving accurate results due to uncertainties associated with region...Landslide susceptibility mapping(LSM)plays a crucial role in assessing geological risks.The current LSM techniques face a significant challenge in achieving accurate results due to uncertainties associated with regional-scale geotechnical parameters.To explore rainfall-induced LSM,this study proposes a hybrid model that combines the physically-based probabilistic model(PPM)with convolutional neural network(CNN).The PPM is capable of effectively capturing the spatial distribution of landslides by incorporating the probability of failure(POF)considering the slope stability mechanism under rainfall conditions.This significantly characterizes the variation of POF caused by parameter uncertainties.CNN was used as a binary classifier to capture the spatial and channel correlation between landslide conditioning factors and the probability of landslide occurrence.OpenCV image enhancement technique was utilized to extract non-landslide points based on the POF of landslides.The proposed model comprehensively considers physical mechanics when selecting non-landslide samples,effectively filtering out samples that do not adhere to physical principles and reduce the risk of overfitting.The results indicate that the proposed PPM-CNN hybrid model presents a higher prediction accuracy,with an area under the curve(AUC)value of 0.85 based on the landslide case of the Niangniangba area of Gansu Province,China compared with the individual CNN model(AUC=0.61)and the PPM(AUC=0.74).This model can also consider the statistical correlation and non-normal probability distributions of model parameters.These results offer practical guidance for future research on rainfall-induced LSM at the regional scale.展开更多
The existing ontology mapping methods mainly consider the structure of the ontology and the mapping precision is lower to some extent. According to statistical theory, a method which is based on the hidden Markov mode...The existing ontology mapping methods mainly consider the structure of the ontology and the mapping precision is lower to some extent. According to statistical theory, a method which is based on the hidden Markov model is presented to establish ontology mapping. This method considers concepts as models, and attributes, relations, hierarchies, siblings and rules of the concepts as the states of the HMM, respectively. The models corresponding to the concepts are built by virtue of learning many training instances. On the basis of the best state sequence that is decided by the Viterbi algorithm and corresponding to the instance, mapping between the concepts can be established by maximum likelihood estimation. Experimental results show that this method can improve the precision of heterogeneous ontology mapping effectively.展开更多
Soil erosion is an important environmental threat in China.However,quantitative estimates of soil erosion in China have rarely been reported in the literature.In this study,soil loss potential in China was estimated b...Soil erosion is an important environmental threat in China.However,quantitative estimates of soil erosion in China have rarely been reported in the literature.In this study,soil loss potential in China was estimated by integrating satellite images,field samples,and ground observations based on the Revised Universal Soil Loss Equation(RUSLE).The rainfall erosivity factor was estimated from merged rainfall data using Collocated CoKriging(ColCOK)and downscaled by geographically weighted regression(GWR).The Random Forest(RF)regression approach was used as a tool for understanding and predicting the relationship between the soil erodibility factor and a set of environment factors.Our results show that the average erosion rate in China is 1.44 t ha^(–1) yr^(–1).More than 60%of the territory in China is influenced by soil erosion limitedly,with an average potential erosion rate less than 0.1 t ha^(–1) yr^(–1).Other unused land and other forested woodlands showed the highest erosion risk.Our estimates are comparable to those of runoff plot studies.Our results provide a useful tool for soil loss assessments and ecological environment protections.展开更多
This work was to generate landslide susceptibility maps for the Three Gorges Reservoir(TGR) area, China by using different machine learning models. Three advanced machine learning methods, namely, gradient boosting de...This work was to generate landslide susceptibility maps for the Three Gorges Reservoir(TGR) area, China by using different machine learning models. Three advanced machine learning methods, namely, gradient boosting decision tree(GBDT), random forest(RF) and information value(InV) models, were used, and the performances were assessed and compared. In total, 202 landslides were mapped by using a series of field surveys, aerial photographs, and reviews of historical and bibliographical data. Nine causative factors were then considered in landslide susceptibility map generation by using the GBDT, RF and InV models. All of the maps of the causative factors were resampled to a resolution of 28.5 m. Of the 486289 pixels in the area,28526 pixels were landslide pixels, and 457763 pixels were non-landslide pixels. Finally, landslide susceptibility maps were generated by using the three machine learning models, and their performances were assessed through receiver operating characteristic(ROC) curves, the sensitivity, specificity,overall accuracy(OA), and kappa coefficient(KAPPA). The results showed that the GBDT, RF and In V models in overall produced reasonable accurate landslide susceptibility maps. Among these three methods, the GBDT method outperforms the other two machine learning methods, which can provide strong technical support for producing landslide susceptibility maps in TGR.展开更多
The E1 Nifio/La Nifia Southern Oscillation （ENSO） is an interannual phenomenon involved in the tropical Pacific ocean-atmosphere interactions. In this paper, a coupled system of sea-air oscillator model is studied. ...The E1 Nifio/La Nifia Southern Oscillation （ENSO） is an interannual phenomenon involved in the tropical Pacific ocean-atmosphere interactions. In this paper, a coupled system of sea-air oscillator model is studied. The aim is to create an asymptotic solving method of nonlinear equation for the ENSO model. And based on a class of oscillators of ENSO model, employing the method of homotopic mapping, the approximate solution of corresponding problem is studied. It is proven from the results that the homotopic method can be used for analysing the sea surface temperature anomaly in the equatorial eastern Pacific and the thermocline depth anomaly of the atmosphere-ocean oscillation for ENSO model.展开更多
Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challeng...Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challenging task. A multidatabase common data model is firstly introduced based on XML, named XML-based Integration Data Model (XIDM), which is suitable for integrating different types of schemas. Then an approach of schema mappings based on XIDM in multidatabase systems has been presented. The mappings include global mappings, dealing with horizontal and vertical partitioning between global schemas and export schemas, and local mappings, processing the transformation between export schemas and local schemas. Finally, the illustration and implementation of schema mappings in a multidatabase prototype - Panorama system are also discussed. The implementation results demonstrate that the XIDM is an efficient model for managing multiple heterogeneous data sources and the approaches of schema mapping based on XIDM behave very well when integrating relational, object-oriented database systems and other file systems.展开更多
With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel model...With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel modeling. Considering channel model is prerequisite for system design and performance evaluation of 6 G technologies, we face a challenging task: how to accurately and efficiently model 6 G channel for various scenarios? This paper tries to answer it. Firstly, the features of cluster-nuclei(CN) and principle of cluster-nuclei based channel model(CNCM) are introduced. Then, a novel modeling framework is proposed to implement CNCM,which consists four steps: propagation environment reconstruction, cluster-nuclei identification, multipath parameters generation, and channel coefficients generation. Three-dimensional environment with material information is utilized to map CN with scatterers in the propagation pathway. CN are identified by geometrical and electric field calculation based on environmental mapping, and multipath components within CN are calculated by statistical characteristics of angle, power and delay domains. Finally, we present a three-level verification structure to investigate the accuracy and complexity of channel modeling comprehensively. Simulation results reveal that CNCM can perform higher accuracy than geometrybased stochastic model while lower complexity compared with ray-tracing model for practical propagation environment.展开更多
Landslide hazard is as the probability of occurrence of a potentially damaging landslide phenomenon within specified period of time and within a given area. The susceptibility map provides the relative spatial probabi...Landslide hazard is as the probability of occurrence of a potentially damaging landslide phenomenon within specified period of time and within a given area. The susceptibility map provides the relative spatial probability of landslides occurrence. A study is presented of the application of GIS and artificial neural network model to landslide susceptibility mapping, with particular reference to landslides on natural terrain in this paper. The method has been applied to Lantau Island, the largest outlying island within the territory of Hong Kong. A three-level neural network model was constructed and trained by the back-propagate algorithm in the geographical database of the study area. The data in the database includes digital elevation modal and its derivatives, landslides distribution and their attributes, superficial geological maps, vegetation cover, the raingauges distribution and their 14 years 5-minute observation. Based on field inspection and analysis of correlation between terrain variables and landslides frequency, lithology, vegetation cover, slope gradient, slope aspect, slope curvature, elevation, the characteristic value, the rainstorms corresponding to the landslide, and distance to drainage Une are considered to be related to landslide susceptibility in this study. The artificial neural network is then coupled with the ArcView3.2 GIS software to produce the landslide susceptibility map, which classifies the susceptibility into three levels: low, moderate, and high. The results from this study indicate that GIS coupled with artificial neural network model is a flexible and powerful approach to identify the spatial probability of hazards.展开更多
Investigation on landslide phenomenon is necessary for understanding and delineating the landslide prone and safer places for different land use practices. On this basis, a new model known as genetic algorithm for the...Investigation on landslide phenomenon is necessary for understanding and delineating the landslide prone and safer places for different land use practices. On this basis, a new model known as genetic algorithm for the rule set production was applied in order to assess its efficacy to obtain a better result and a more precise landslide susceptibility map in Klijanerestagh area of Iran. This study considered twelve landslide conditioning factors(LCF) like altitude, slope, aspect, plan curvature, profile curvature, topographic wetness index(TWI), distance from rivers, faults, and roads, land use/cover, and lithology. For modeling purpose, the Genetic Algorithm for the Rule Set Production(GARP) algorithm was applied in order to produce the landslide susceptibility map. Finally, to evaluate the efficacy of the GARP model, receiver operating characteristics curve as well as the Kappa index were employed. Based on these indices, the GARP model predicted the probability of future landslide incidences with the area under the receiver operating characteristics curve(AUC-ROC) values of 0.932, and 0.907 for training and validating datasets, respectively. In addition, Kappa values for the training and validating datasets were computed as 0.775, and 0.716, respectively. Thus, it can be concluded that the GARP algorithm can be a new but effective method for generating landslide susceptibility maps(LSMs). Furthermore, higher contribution of the lithology, distance from roads, and distance from faults was observed, while lower contribution was attributed to soil, profile curvature, and TWI factors. The introduced methodology in this paper can be suggested for other areas with similar topographical and hydrogeological characteristics for land use planning and reducing the landslide damages.展开更多
Knowledge on the potential suitability of tree species to the site is very important for forest management planning.Natural forest distribution provides a good reference for afforestation and forest restoration.In thi...Knowledge on the potential suitability of tree species to the site is very important for forest management planning.Natural forest distribution provides a good reference for afforestation and forest restoration.In this study,we developed species distribution model(SDM)for 16 major tree species with 2,825 permanent sample plots with natural origin from Chinese National Forest Inventory data collected in Jilin Province using the Maxent model.Three types of environmental factors including bioclimate,soil and topography with a total of 33 variables were tested as the input.The values of area under the curve(AUC,one of the receiver operating characteristics of the Maxent model)in the training and test datasets were between 0.784 and 0.968,indicating that the prediction results were quite reliable.The environmental factors affecting the distribution of species were ranked in terms of their importance to the species distribution.Generally,the climatic factors had the greatest contribution,which included mean diurnal range,annual mean temperature,temperature annual range,and iosthermality.But the main environmental factors varied with tree species.Distribution suitability maps under current(1950-2000)and future climate scenarios(CCSM4-RCP 2.6 and RCP 6.0 during 2050)were produced for 16 major tree species in Jilin Province using the model developed.The predicted current and future ranges of habitat suitability of the 16 tree species are likely to be positively and negatively affected by future climate.Seven tree species were found to benefit from future climate including B etula costata,Fraxinus mandshurica,Juglans mandshurica,Phellodendron amurense,Populus ussuriensis,Quercus mongolica and Ulmus pumila;five tree species will experience decline in their suitable habitat including B.platyphylla,Tilia mongolica,Picea asperata,Pinus sylvestris,Pinus koraiensis;and four(Salix koreensis,Abies fabri,Pinus densiflora and Larix olgensis)showed the inconsistency under RCP 2.6 and RCP 6.0 scenarios.The maps of the habitat suitability can be used as a basis for afforestation and forest restoration in northeastern China.The SDMs could be a potential tool for forest management planning.展开更多
While the region of western Guangxi-southeastern Yunan, China, is known and considered prospective for manganese deposits, carrying out prospectivity mapping in this region is challenging due to the diversity of geolo...While the region of western Guangxi-southeastern Yunan, China, is known and considered prospective for manganese deposits, carrying out prospectivity mapping in this region is challenging due to the diversity of geological factors, the complexity of geological process and the asymmetry of geo-information. In this work, the manganese potential mapping for further exploration targeting is implemented via spatial analysis and modal-adaptive prospectivity modeling. On the basis of targeting criteria developed by the mineral system approach, the spatial analysis is leveraged to extract the predictor variables to identify features of the geological process. Specifically, a metallogenic field analysis approach is proposed to extract metallogenic information that quantifies the regional impacts of the synsedimentary faults and sedimentary basins. In the integration of the extracted predictor variables, a modal-adaptive prospectivity model is built, which allows to adapt different data availability and geological process. The resulting prospective areas of high potential not only correspond to the areas of known manganese deposits but also provide a number of favorable targets in the region for future mineral exploration.展开更多
Aiming at the problem of structure design in reverse-design of mechanism,a structure mapping method based on reverse solving of locus and motion(RSLM)is presented.The mechanism scheme meeting the requirements of geome...Aiming at the problem of structure design in reverse-design of mechanism,a structure mapping method based on reverse solving of locus and motion(RSLM)is presented.The mechanism scheme meeting the requirements of geometric and structural features is obtained through RSLM.The element instance subsets related to component are established based on the element type mapping,pair structure type mapping and design knowledge mapping between components and elements layer by layer.The assembly position mapping of elements is established based on the topological structure information of mechanism scheme,and the product modeling of structure mapping is realized.The algorithm program and prototype system of product structure mapping based on RSLM are developed.Application samples show that the method implements the integration of scheme design,assembly design and structure design,and modeling for product structure mapping based on RSLM.The feasibility of assembly is analyzed in scheme design that contributes to reducing the design error,and raising the design efficiency and quality.展开更多
The application of helicopter emergency rescue is becoming increasingly widespread,but the flight crew training in this area is still difficult due to high cost and risk.Nevertheless,with the development of Virtual Re...The application of helicopter emergency rescue is becoming increasingly widespread,but the flight crew training in this area is still difficult due to high cost and risk.Nevertheless,with the development of Virtual Reality(VR)technology,virtual simulation has become a significant role in crew training of helicopter rescue.During the implementation of VR-based training,how to transform complex real tasks into VR scenarios and how to evaluate the performance of crew are of great importance.To address these issues,a novel VR-based R-E-A-D(Report,Evaluate,Agree,Do)evaluation model for training is proposed,which is suitable for complex missions with multiple tasks,multiple scenarios,and multiple people.Then,a mapping method of VR scenarios is put forward,which can transform the real tasks into virtual scenarios to serve the virtual simulation training.Finally,an experiment is carried out to verify the feasibility of the evaluation method and virtual scenario mapping method.展开更多
In a complex urban scene,observation from a single sensor unavoidably leads to voids in observations,failing to describe urban objects in a comprehensive manner.In this paper,we propose a spatio-temporal-spectral-angu...In a complex urban scene,observation from a single sensor unavoidably leads to voids in observations,failing to describe urban objects in a comprehensive manner.In this paper,we propose a spatio-temporal-spectral-angular observation model to integrate observations from UAV and mobile mapping vehicle platform,realizing a joint,coordinated observation operation from both air and ground.We develop a multi-source remote sensing data acquisition system to effectively acquire multi-angle data of complex urban scenes.Multi-source data fusion solves the missing data problem caused by occlusion and achieves accurate,rapid,and complete collection of holographic spatial and temporal information in complex urban scenes.We carried out an experiment on Baisha Town,Chongqing,China and obtained multi-sensor,multi-angle data from UAV and mobile mapping vehicle.We first extracted the point cloud from UAV and then integrated the UAV and mobile mapping vehicle point cloud.The inte-grated results combined both the characteristics of UAV and mobile mapping vehicle point cloud,confirming the practicability of the proposed joint data acquisition platform and the effectiveness of spatio-temporal-spectral-angular observation model.Compared with the observation from UAV or mobile mapping vehicle alone,the integrated system provides an effective data acquisition solution toward comprehensive urban monitoring.展开更多
Since the complex impeller structure and the difficult remanufacturing process may easily cause advance remanufacturing or excessive use,an optimized design method of impeller and service mapping model was presented f...Since the complex impeller structure and the difficult remanufacturing process may easily cause advance remanufacturing or excessive use,an optimized design method of impeller and service mapping model was presented for its proactive remanufacturing with setting up to explore the best remanufacturing time point in this work.Considering a certain model of long distance pipeline compressor impeller with the Basquin equation and the design method of impeller,the mathematical relationship between the changes of structure and life of the impeller was established.And the service mapping model between the structure and life was set up and simulated by ANSYS software.Thus,the service mapping model was applied to feedback the original design for proactive remanufacturing.In this work,the best proactive remanufacturing time point of impeller was analyzed with the service mapping model,and the structural parameter values could be optimized at this time point.Meanwhile,in the results of this simulation,it proves that the impeller under this optimization performance could satisfy the impeller operating demands.Therefore,comparing with the traditional optimization design method,the remanufacturing optimized design based on the service mapping model is feasible in proactive remanufacturing for sustainable development.展开更多
In terms of 34-year monthly mean temperature series in 1946-1979,the multi-level maPPing model of neural netWork BP type was applied to calculate the system's fractual dimension Do=2'8,leading tO a three-level...In terms of 34-year monthly mean temperature series in 1946-1979,the multi-level maPPing model of neural netWork BP type was applied to calculate the system's fractual dimension Do=2'8,leading tO a three-level model of this type with ixj=3x2,k=l,and the 1980 monthly mean temperture predichon on a long-t6rm basis were prepared by steadily modifying the weighting coefficient,making for the correlation coefficient of 97% with the measurements.Furthermore,the weighhng parameter was modified for each month of 1980 by means of observations,therefore constrcuhng monthly mean temperature forecasts from January to December of the year,reaching the correlation of 99.9% with the measurements.Likewise,the resulting 1981 monthly predictions on a long-range basis with 1946-1980 corresponding records yielded the correlahon of 98% and the month-tO month forecasts of 99.4%.展开更多
This study aims to provide a predictive vegetation mapping approach based on the spectral data, DEM and Generalized Additive Models (GAMs). GAMs were used as a prediction tool to describe the relationship between vege...This study aims to provide a predictive vegetation mapping approach based on the spectral data, DEM and Generalized Additive Models (GAMs). GAMs were used as a prediction tool to describe the relationship between vegetation and environmental variables, as well as spectral variables. Based on the fitted GAMs model, probability map of species occurrence was generated and then vegetation type of each grid was defined according to the probability of species occurrence. Deviance analysis was employed to test the goodness of curve fitting and drop contribution calculation was used to evaluate the contribution of each predictor in the fitted GAMs models. Area under curve (AUC) of Receiver Operating Characteristic (ROC) curve was employed to assess the results maps of probability. The results showed that: 1) AUC values of the fitted GAMs models are very high which proves that integrating spectral data and environmental variables based on the GAMs is a feasible way to map the vegetation. 2) Prediction accuracy varies with plant community, and community with dense cover is better predicted than sparse plant community. 3) Both spectral variables and environmental variables play an important role in mapping the vegetation. However, the contribution of the same predictor in the GAMs models for different plant communities is different. 4) Insufficient resolution of spectral data, environmental data and confounding effects of land use and other variables which are not closely related to the environmental conditions are the major causes of imprecision.展开更多
基金the University of Transport Technology under the project entitled“Application of Machine Learning Algorithms in Landslide Susceptibility Mapping in Mountainous Areas”with grant number DTTD2022-16.
文摘This study was aimed to prepare landslide susceptibility maps for the Pithoragarh district in Uttarakhand,India,using advanced ensemble models that combined Radial Basis Function Networks(RBFN)with three ensemble learning techniques:DAGGING(DG),MULTIBOOST(MB),and ADABOOST(AB).This combination resulted in three distinct ensemble models:DG-RBFN,MB-RBFN,and AB-RBFN.Additionally,a traditional weighted method,Information Value(IV),and a benchmark machine learning(ML)model,Multilayer Perceptron Neural Network(MLP),were employed for comparison and validation.The models were developed using ten landslide conditioning factors,which included slope,aspect,elevation,curvature,land cover,geomorphology,overburden depth,lithology,distance to rivers and distance to roads.These factors were instrumental in predicting the output variable,which was the probability of landslide occurrence.Statistical analysis of the models’performance indicated that the DG-RBFN model,with an Area Under ROC Curve(AUC)of 0.931,outperformed the other models.The AB-RBFN model achieved an AUC of 0.929,the MB-RBFN model had an AUC of 0.913,and the MLP model recorded an AUC of 0.926.These results suggest that the advanced ensemble ML model DG-RBFN was more accurate than traditional statistical model,single MLP model,and other ensemble models in preparing trustworthy landslide susceptibility maps,thereby enhancing land use planning and decision-making.
基金financial support of the National Natural Science Foundation of China(No.52371103)the Fundamental Research Funds for the Central Universities,China(No.2242023K40028)+1 种基金the Open Research Fund of Jiangsu Key Laboratory for Advanced Metallic Materials,China(No.AMM2023B01).financial support of the Research Fund of Shihezi Key Laboratory of AluminumBased Advanced Materials,China(No.2023PT02)financial support of Guangdong Province Science and Technology Major Project,China(No.2021B0301030005)。
文摘Oxide dispersion strengthened(ODS)alloys are extensively used owing to high thermostability and creep strength contributed from uniformly dispersed fine oxides particles.However,the existence of these strengthening particles also deteriorates the processability and it is of great importance to establish accurate processing maps to guide the thermomechanical processes to enhance the formability.In this study,we performed particle swarm optimization-based back propagation artificial neural network model to predict the high temperature flow behavior of 0.25wt%Al2O3 particle-reinforced Cu alloys,and compared the accuracy with that of derived by Arrhenius-type constitutive model and back propagation artificial neural network model.To train these models,we obtained the raw data by fabricating ODS Cu alloys using the internal oxidation and reduction method,and conducting systematic hot compression tests between 400 and800℃with strain rates of 10^(-2)-10 S^(-1).At last,processing maps for ODS Cu alloys were proposed by combining processing parameters,mechanical behavior,microstructure characterization,and the modeling results achieved a coefficient of determination higher than>99%.
文摘Objective:To evaluate the value of rehabilitation nursing based on mind mapping model combined with psychological intervention for patients with nephrotic syndrome(NS).Methods:A total of 60 patients with NS who visited our hospital from January 2024 to December 2024 were selected as samples and randomly divided into groups.The observation group received rehabilitation nursing based on the mind mapping model combined with psychological intervention,while the control group received routine intervention.The differences in emotional scores,self-care ability scores,compliance,and complications were compared between the two groups.Results:The anxiety(SAS)and depression(SDS)scores of the observation group were lower than those of the control group,while the self-care ability scale(ESCA)score was higher than that of the control group(P<0.05).The compliance rate of the observation group was higher than that of the control group(P<0.05).The complication rate of NS in the observation group was lower than that in the control group(P<0.05).Conclusion:Rehabilitation nursing based on the mind mapping model combined with psychological intervention can enhance self-care ability,reduce negative emotions,and reduce complications in NS nursing,which is efficient and feasible.
基金funding support from the National Natural Science Foundation of China(Grant Nos.U22A20594,52079045)Hong-Zhi Cui acknowledges the financial support of the China Scholarship Council(Grant No.CSC:202206710014)for his research at Universitat Politecnica de Catalunya,Barcelona.
文摘Landslide susceptibility mapping(LSM)plays a crucial role in assessing geological risks.The current LSM techniques face a significant challenge in achieving accurate results due to uncertainties associated with regional-scale geotechnical parameters.To explore rainfall-induced LSM,this study proposes a hybrid model that combines the physically-based probabilistic model(PPM)with convolutional neural network(CNN).The PPM is capable of effectively capturing the spatial distribution of landslides by incorporating the probability of failure(POF)considering the slope stability mechanism under rainfall conditions.This significantly characterizes the variation of POF caused by parameter uncertainties.CNN was used as a binary classifier to capture the spatial and channel correlation between landslide conditioning factors and the probability of landslide occurrence.OpenCV image enhancement technique was utilized to extract non-landslide points based on the POF of landslides.The proposed model comprehensively considers physical mechanics when selecting non-landslide samples,effectively filtering out samples that do not adhere to physical principles and reduce the risk of overfitting.The results indicate that the proposed PPM-CNN hybrid model presents a higher prediction accuracy,with an area under the curve(AUC)value of 0.85 based on the landslide case of the Niangniangba area of Gansu Province,China compared with the individual CNN model(AUC=0.61)and the PPM(AUC=0.74).This model can also consider the statistical correlation and non-normal probability distributions of model parameters.These results offer practical guidance for future research on rainfall-induced LSM at the regional scale.
基金The Weaponry Equipment Foundation of PLA Equipment Ministry (No51406020105JB8103)
文摘The existing ontology mapping methods mainly consider the structure of the ontology and the mapping precision is lower to some extent. According to statistical theory, a method which is based on the hidden Markov model is presented to establish ontology mapping. This method considers concepts as models, and attributes, relations, hierarchies, siblings and rules of the concepts as the states of the HMM, respectively. The models corresponding to the concepts are built by virtue of learning many training instances. On the basis of the best state sequence that is decided by the Viterbi algorithm and corresponding to the instance, mapping between the concepts can be established by maximum likelihood estimation. Experimental results show that this method can improve the precision of heterogeneous ontology mapping effectively.
基金supported by the National Natural Science Foundation of China (41461063 and 41571339)the China Postdoctoral Science Foundation (2018M630682)the Research Fund of State Key Laboratory of Soil and Sustainable Agriculture, Nanjing Institute of Soil Science, the Chinese Academy of Sciences (Y412201430)
文摘Soil erosion is an important environmental threat in China.However,quantitative estimates of soil erosion in China have rarely been reported in the literature.In this study,soil loss potential in China was estimated by integrating satellite images,field samples,and ground observations based on the Revised Universal Soil Loss Equation(RUSLE).The rainfall erosivity factor was estimated from merged rainfall data using Collocated CoKriging(ColCOK)and downscaled by geographically weighted regression(GWR).The Random Forest(RF)regression approach was used as a tool for understanding and predicting the relationship between the soil erodibility factor and a set of environment factors.Our results show that the average erosion rate in China is 1.44 t ha^(–1) yr^(–1).More than 60%of the territory in China is influenced by soil erosion limitedly,with an average potential erosion rate less than 0.1 t ha^(–1) yr^(–1).Other unused land and other forested woodlands showed the highest erosion risk.Our estimates are comparable to those of runoff plot studies.Our results provide a useful tool for soil loss assessments and ecological environment protections.
基金This work was supported in part by the National Natural Science Foundation of China(61601418,41602362,61871259)in part by the Opening Foundation of Hunan Engineering and Research Center of Natural Resource Investigation and Monitoring(2020-5)+1 种基金in part by the Qilian Mountain National Park Research Center(Qinghai)(grant number:GKQ2019-01)in part by the Geomatics Technology and Application Key Laboratory of Qinghai Province,Grant No.QHDX-2019-01.
文摘This work was to generate landslide susceptibility maps for the Three Gorges Reservoir(TGR) area, China by using different machine learning models. Three advanced machine learning methods, namely, gradient boosting decision tree(GBDT), random forest(RF) and information value(InV) models, were used, and the performances were assessed and compared. In total, 202 landslides were mapped by using a series of field surveys, aerial photographs, and reviews of historical and bibliographical data. Nine causative factors were then considered in landslide susceptibility map generation by using the GBDT, RF and InV models. All of the maps of the causative factors were resampled to a resolution of 28.5 m. Of the 486289 pixels in the area,28526 pixels were landslide pixels, and 457763 pixels were non-landslide pixels. Finally, landslide susceptibility maps were generated by using the three machine learning models, and their performances were assessed through receiver operating characteristic(ROC) curves, the sensitivity, specificity,overall accuracy(OA), and kappa coefficient(KAPPA). The results showed that the GBDT, RF and In V models in overall produced reasonable accurate landslide susceptibility maps. Among these three methods, the GBDT method outperforms the other two machine learning methods, which can provide strong technical support for producing landslide susceptibility maps in TGR.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 90111011 and 10471039）, the State Key Development Program for Basic Research of China （Grant Nos 2003CB415101-03 and 2004CB418304）, the Key Project of the Chinese Academy of Sciences （Grant No KZCX3-SW-221）, in part by E-Institutes of Shanghai Municipal Education Commission （Grant No N.E03004）, and the Natural Science Foundation of Zhejiang Province, China （Grant No Y604127）.
文摘The E1 Nifio/La Nifia Southern Oscillation （ENSO） is an interannual phenomenon involved in the tropical Pacific ocean-atmosphere interactions. In this paper, a coupled system of sea-air oscillator model is studied. The aim is to create an asymptotic solving method of nonlinear equation for the ENSO model. And based on a class of oscillators of ENSO model, employing the method of homotopic mapping, the approximate solution of corresponding problem is studied. It is proven from the results that the homotopic method can be used for analysing the sea surface temperature anomaly in the equatorial eastern Pacific and the thermocline depth anomaly of the atmosphere-ocean oscillation for ENSO model.
文摘Multidatabase systems are designed to achieve schema integration and data interoperation among distributed and heterogeneous database systems. But data model heterogeneity and schema heterogeneity make this a challenging task. A multidatabase common data model is firstly introduced based on XML, named XML-based Integration Data Model (XIDM), which is suitable for integrating different types of schemas. Then an approach of schema mappings based on XIDM in multidatabase systems has been presented. The mappings include global mappings, dealing with horizontal and vertical partitioning between global schemas and export schemas, and local mappings, processing the transformation between export schemas and local schemas. Finally, the illustration and implementation of schema mappings in a multidatabase prototype - Panorama system are also discussed. The implementation results demonstrate that the XIDM is an efficient model for managing multiple heterogeneous data sources and the approaches of schema mapping based on XIDM behave very well when integrating relational, object-oriented database systems and other file systems.
基金supported by National Science Fund for Distinguished Young Scholars (No.61925102)Beijing University of Posts and TelecommunicationsChina Mobile Research Institute Joint Innovation Center。
文摘With the research of the upcoming sixth generation(6 G) systems, new technologies will require wider bandwidth, larger scale antenna arrays and more diverse wireless communication scenarios on the future channel modeling. Considering channel model is prerequisite for system design and performance evaluation of 6 G technologies, we face a challenging task: how to accurately and efficiently model 6 G channel for various scenarios? This paper tries to answer it. Firstly, the features of cluster-nuclei(CN) and principle of cluster-nuclei based channel model(CNCM) are introduced. Then, a novel modeling framework is proposed to implement CNCM,which consists four steps: propagation environment reconstruction, cluster-nuclei identification, multipath parameters generation, and channel coefficients generation. Three-dimensional environment with material information is utilized to map CN with scatterers in the propagation pathway. CN are identified by geometrical and electric field calculation based on environmental mapping, and multipath components within CN are calculated by statistical characteristics of angle, power and delay domains. Finally, we present a three-level verification structure to investigate the accuracy and complexity of channel modeling comprehensively. Simulation results reveal that CNCM can perform higher accuracy than geometrybased stochastic model while lower complexity compared with ray-tracing model for practical propagation environment.
基金National Natural Science Foundation of China, No.49971066.
文摘Landslide hazard is as the probability of occurrence of a potentially damaging landslide phenomenon within specified period of time and within a given area. The susceptibility map provides the relative spatial probability of landslides occurrence. A study is presented of the application of GIS and artificial neural network model to landslide susceptibility mapping, with particular reference to landslides on natural terrain in this paper. The method has been applied to Lantau Island, the largest outlying island within the territory of Hong Kong. A three-level neural network model was constructed and trained by the back-propagate algorithm in the geographical database of the study area. The data in the database includes digital elevation modal and its derivatives, landslides distribution and their attributes, superficial geological maps, vegetation cover, the raingauges distribution and their 14 years 5-minute observation. Based on field inspection and analysis of correlation between terrain variables and landslides frequency, lithology, vegetation cover, slope gradient, slope aspect, slope curvature, elevation, the characteristic value, the rainstorms corresponding to the landslide, and distance to drainage Une are considered to be related to landslide susceptibility in this study. The artificial neural network is then coupled with the ArcView3.2 GIS software to produce the landslide susceptibility map, which classifies the susceptibility into three levels: low, moderate, and high. The results from this study indicate that GIS coupled with artificial neural network model is a flexible and powerful approach to identify the spatial probability of hazards.
基金Science and Research Branch, Islamic Azad University
文摘Investigation on landslide phenomenon is necessary for understanding and delineating the landslide prone and safer places for different land use practices. On this basis, a new model known as genetic algorithm for the rule set production was applied in order to assess its efficacy to obtain a better result and a more precise landslide susceptibility map in Klijanerestagh area of Iran. This study considered twelve landslide conditioning factors(LCF) like altitude, slope, aspect, plan curvature, profile curvature, topographic wetness index(TWI), distance from rivers, faults, and roads, land use/cover, and lithology. For modeling purpose, the Genetic Algorithm for the Rule Set Production(GARP) algorithm was applied in order to produce the landslide susceptibility map. Finally, to evaluate the efficacy of the GARP model, receiver operating characteristics curve as well as the Kappa index were employed. Based on these indices, the GARP model predicted the probability of future landslide incidences with the area under the receiver operating characteristics curve(AUC-ROC) values of 0.932, and 0.907 for training and validating datasets, respectively. In addition, Kappa values for the training and validating datasets were computed as 0.775, and 0.716, respectively. Thus, it can be concluded that the GARP algorithm can be a new but effective method for generating landslide susceptibility maps(LSMs). Furthermore, higher contribution of the lithology, distance from roads, and distance from faults was observed, while lower contribution was attributed to soil, profile curvature, and TWI factors. The introduced methodology in this paper can be suggested for other areas with similar topographical and hydrogeological characteristics for land use planning and reducing the landslide damages.
基金supported by the forestry public welfare scientific research project(Grant No.201504303)。
文摘Knowledge on the potential suitability of tree species to the site is very important for forest management planning.Natural forest distribution provides a good reference for afforestation and forest restoration.In this study,we developed species distribution model(SDM)for 16 major tree species with 2,825 permanent sample plots with natural origin from Chinese National Forest Inventory data collected in Jilin Province using the Maxent model.Three types of environmental factors including bioclimate,soil and topography with a total of 33 variables were tested as the input.The values of area under the curve(AUC,one of the receiver operating characteristics of the Maxent model)in the training and test datasets were between 0.784 and 0.968,indicating that the prediction results were quite reliable.The environmental factors affecting the distribution of species were ranked in terms of their importance to the species distribution.Generally,the climatic factors had the greatest contribution,which included mean diurnal range,annual mean temperature,temperature annual range,and iosthermality.But the main environmental factors varied with tree species.Distribution suitability maps under current(1950-2000)and future climate scenarios(CCSM4-RCP 2.6 and RCP 6.0 during 2050)were produced for 16 major tree species in Jilin Province using the model developed.The predicted current and future ranges of habitat suitability of the 16 tree species are likely to be positively and negatively affected by future climate.Seven tree species were found to benefit from future climate including B etula costata,Fraxinus mandshurica,Juglans mandshurica,Phellodendron amurense,Populus ussuriensis,Quercus mongolica and Ulmus pumila;five tree species will experience decline in their suitable habitat including B.platyphylla,Tilia mongolica,Picea asperata,Pinus sylvestris,Pinus koraiensis;and four(Salix koreensis,Abies fabri,Pinus densiflora and Larix olgensis)showed the inconsistency under RCP 2.6 and RCP 6.0 scenarios.The maps of the habitat suitability can be used as a basis for afforestation and forest restoration in northeastern China.The SDMs could be a potential tool for forest management planning.
基金Project(2017YFC0601503)supported by the National Key R&D Program of ChinaProjects(41772349,41972309,41472301,41772348)supported by the National Natural Science Foundation of China。
文摘While the region of western Guangxi-southeastern Yunan, China, is known and considered prospective for manganese deposits, carrying out prospectivity mapping in this region is challenging due to the diversity of geological factors, the complexity of geological process and the asymmetry of geo-information. In this work, the manganese potential mapping for further exploration targeting is implemented via spatial analysis and modal-adaptive prospectivity modeling. On the basis of targeting criteria developed by the mineral system approach, the spatial analysis is leveraged to extract the predictor variables to identify features of the geological process. Specifically, a metallogenic field analysis approach is proposed to extract metallogenic information that quantifies the regional impacts of the synsedimentary faults and sedimentary basins. In the integration of the extracted predictor variables, a modal-adaptive prospectivity model is built, which allows to adapt different data availability and geological process. The resulting prospective areas of high potential not only correspond to the areas of known manganese deposits but also provide a number of favorable targets in the region for future mineral exploration.
基金supported by National Hi-tech Research Development Program of China(863 Program,No.2006AA04ZlI4)Research Fund for the Doctoral Program of Higher Education,China(No.20040335060)Zhejiang Provincial Scientific Personnel Educational Foundation,China(No.R603240).
文摘Aiming at the problem of structure design in reverse-design of mechanism,a structure mapping method based on reverse solving of locus and motion(RSLM)is presented.The mechanism scheme meeting the requirements of geometric and structural features is obtained through RSLM.The element instance subsets related to component are established based on the element type mapping,pair structure type mapping and design knowledge mapping between components and elements layer by layer.The assembly position mapping of elements is established based on the topological structure information of mechanism scheme,and the product modeling of structure mapping is realized.The algorithm program and prototype system of product structure mapping based on RSLM are developed.Application samples show that the method implements the integration of scheme design,assembly design and structure design,and modeling for product structure mapping based on RSLM.The feasibility of assembly is analyzed in scheme design that contributes to reducing the design error,and raising the design efficiency and quality.
文摘The application of helicopter emergency rescue is becoming increasingly widespread,but the flight crew training in this area is still difficult due to high cost and risk.Nevertheless,with the development of Virtual Reality(VR)technology,virtual simulation has become a significant role in crew training of helicopter rescue.During the implementation of VR-based training,how to transform complex real tasks into VR scenarios and how to evaluate the performance of crew are of great importance.To address these issues,a novel VR-based R-E-A-D(Report,Evaluate,Agree,Do)evaluation model for training is proposed,which is suitable for complex missions with multiple tasks,multiple scenarios,and multiple people.Then,a mapping method of VR scenarios is put forward,which can transform the real tasks into virtual scenarios to serve the virtual simulation training.Finally,an experiment is carried out to verify the feasibility of the evaluation method and virtual scenario mapping method.
基金This work is supported by the National Natural Science Foundation of China[grant numbers 42090012,41771452,41771454,and 41901340].
文摘In a complex urban scene,observation from a single sensor unavoidably leads to voids in observations,failing to describe urban objects in a comprehensive manner.In this paper,we propose a spatio-temporal-spectral-angular observation model to integrate observations from UAV and mobile mapping vehicle platform,realizing a joint,coordinated observation operation from both air and ground.We develop a multi-source remote sensing data acquisition system to effectively acquire multi-angle data of complex urban scenes.Multi-source data fusion solves the missing data problem caused by occlusion and achieves accurate,rapid,and complete collection of holographic spatial and temporal information in complex urban scenes.We carried out an experiment on Baisha Town,Chongqing,China and obtained multi-sensor,multi-angle data from UAV and mobile mapping vehicle.We first extracted the point cloud from UAV and then integrated the UAV and mobile mapping vehicle point cloud.The inte-grated results combined both the characteristics of UAV and mobile mapping vehicle point cloud,confirming the practicability of the proposed joint data acquisition platform and the effectiveness of spatio-temporal-spectral-angular observation model.Compared with the observation from UAV or mobile mapping vehicle alone,the integrated system provides an effective data acquisition solution toward comprehensive urban monitoring.
基金Project(2011CB013406)supported by National Basic Research Program of ChinaProjects(51305119,51375133)supported by National Natural Science Foundation of China
文摘Since the complex impeller structure and the difficult remanufacturing process may easily cause advance remanufacturing or excessive use,an optimized design method of impeller and service mapping model was presented for its proactive remanufacturing with setting up to explore the best remanufacturing time point in this work.Considering a certain model of long distance pipeline compressor impeller with the Basquin equation and the design method of impeller,the mathematical relationship between the changes of structure and life of the impeller was established.And the service mapping model between the structure and life was set up and simulated by ANSYS software.Thus,the service mapping model was applied to feedback the original design for proactive remanufacturing.In this work,the best proactive remanufacturing time point of impeller was analyzed with the service mapping model,and the structural parameter values could be optimized at this time point.Meanwhile,in the results of this simulation,it proves that the impeller under this optimization performance could satisfy the impeller operating demands.Therefore,comparing with the traditional optimization design method,the remanufacturing optimized design based on the service mapping model is feasible in proactive remanufacturing for sustainable development.
文摘In terms of 34-year monthly mean temperature series in 1946-1979,the multi-level maPPing model of neural netWork BP type was applied to calculate the system's fractual dimension Do=2'8,leading tO a three-level model of this type with ixj=3x2,k=l,and the 1980 monthly mean temperture predichon on a long-t6rm basis were prepared by steadily modifying the weighting coefficient,making for the correlation coefficient of 97% with the measurements.Furthermore,the weighhng parameter was modified for each month of 1980 by means of observations,therefore constrcuhng monthly mean temperature forecasts from January to December of the year,reaching the correlation of 99.9% with the measurements.Likewise,the resulting 1981 monthly predictions on a long-range basis with 1946-1980 corresponding records yielded the correlahon of 98% and the month-tO month forecasts of 99.4%.
基金Under the auspices of National Natural Science Foundation of China(No.41001363)
文摘This study aims to provide a predictive vegetation mapping approach based on the spectral data, DEM and Generalized Additive Models (GAMs). GAMs were used as a prediction tool to describe the relationship between vegetation and environmental variables, as well as spectral variables. Based on the fitted GAMs model, probability map of species occurrence was generated and then vegetation type of each grid was defined according to the probability of species occurrence. Deviance analysis was employed to test the goodness of curve fitting and drop contribution calculation was used to evaluate the contribution of each predictor in the fitted GAMs models. Area under curve (AUC) of Receiver Operating Characteristic (ROC) curve was employed to assess the results maps of probability. The results showed that: 1) AUC values of the fitted GAMs models are very high which proves that integrating spectral data and environmental variables based on the GAMs is a feasible way to map the vegetation. 2) Prediction accuracy varies with plant community, and community with dense cover is better predicted than sparse plant community. 3) Both spectral variables and environmental variables play an important role in mapping the vegetation. However, the contribution of the same predictor in the GAMs models for different plant communities is different. 4) Insufficient resolution of spectral data, environmental data and confounding effects of land use and other variables which are not closely related to the environmental conditions are the major causes of imprecision.
