Propelled by the rise of artificial intelligence,cloud services,and data center applications,next-generation,low-power,local-oscillator-less,digital signal processing(DSP)-free,and short-reach coherent optical communi...Propelled by the rise of artificial intelligence,cloud services,and data center applications,next-generation,low-power,local-oscillator-less,digital signal processing(DSP)-free,and short-reach coherent optical communication has evolved into an increasingly prominent area of research in recent years.Here,we demonstrate DSP-free coherent optical transmission by analog signal processing in frequency synchronous optical network(FSON)architecture,which supports polarization multiplexing and higher-order modulation formats.The FSON architecture that allows the numerous laser sources of optical transceivers within a data center can be quasi-synchronized by means of a tree-distributed homology architecture.In conjunction with our proposed pilot-tone assisted Costas loop for an analog coherent receiver,we achieve a record dual-polarization 224-Gb/s 16-QAM 5-km mismatch transmission with reset-free carrier phase recovery in the optical domain.Our proposed DSP-free analog coherent detection system based on the FSON makes it a promising solution for next-generation,low-power,and high-capacity coherent data center interconnects.展开更多
With the increasing attention to the state and role of people in intelligent manufacturing, there is a strong demand for human-cyber-physical systems (HCPS) that focus on human-robot interaction. The existing intellig...With the increasing attention to the state and role of people in intelligent manufacturing, there is a strong demand for human-cyber-physical systems (HCPS) that focus on human-robot interaction. The existing intelligent manufacturing system cannot satisfy efcient human-robot collaborative work. However, unlike machines equipped with sensors, human characteristic information is difcult to be perceived and digitized instantly. In view of the high complexity and uncertainty of the human body, this paper proposes a framework for building a human digital twin (HDT) model based on multimodal data and expounds on the key technologies. Data acquisition system is built to dynamically acquire and update the body state data and physiological data of the human body and realize the digital expression of multi-source heterogeneous human body information. A bidirectional long short-term memory and convolutional neural network (BiLSTM-CNN) based network is devised to fuse multimodal human data and extract the spatiotemporal features, and the human locomotion mode identifcation is taken as an application case. A series of optimization experiments are carried out to improve the performance of the proposed BiLSTM-CNN-based network model. The proposed model is compared with traditional locomotion mode identifcation models. The experimental results proved the superiority of the HDT framework for human locomotion mode identifcation.展开更多
Digital forensics is the science of identifying, extracting, analyzing and presenting the digital evidence that has been stored in the digital devices. Various digital tools and techniques are being used to achieve th...Digital forensics is the science of identifying, extracting, analyzing and presenting the digital evidence that has been stored in the digital devices. Various digital tools and techniques are being used to achieve this. Our paper explains forensic analysis steps in the storage media, hidden data analysis in the file system, network forensic methods and cyber crime data mining. This paper proposes a new tool which is the combination of digital forensic investigation and crime data mining. The proposed system is designed for finding motive, pattern of cyber attacks and counts of attacks types happened during a period. Hence the proposed tool enables the system administrators to minimize the system vulnerability.展开更多
Reverse engineering in the manufacturing field is a process in which the digitized data are obtained from an existing object model or a part of it, and then the CAD model is reconstructed. This paper presents an RBF n...Reverse engineering in the manufacturing field is a process in which the digitized data are obtained from an existing object model or a part of it, and then the CAD model is reconstructed. This paper presents an RBF neural network approach to modify and fit the digitized data. The centers for the RBF are selected by using the orthogonal least squares learning algorithm. A mathematically known surface is used for generating a number of samples for training the networks. The trained networks then generated a number of new points which were compared with the calculating points from the equations. Moreover, a series of practice digitizing curves are used to test the approach. The results showed that this approach is effective in modifying and fitting digitized data and generating data points to reconstruct the surface model.展开更多
A three-layer model for digital communication in a mine is proposed. Two basic platforms are discussed: A uniform transmission network and a uniform data warehouse. An actual,ControlNet based,transmission network plat...A three-layer model for digital communication in a mine is proposed. Two basic platforms are discussed: A uniform transmission network and a uniform data warehouse. An actual,ControlNet based,transmission network plat-form suitable for the Jining No.3 coal mine is presented. This network is an information superhighway intended to inte-grate all existing and new automation subsystems. Its standard interface can be used with future subsystems. The net-work,data structure and management decision-making all employ this uniform hardware and software. This effectively avoids the problems of system and information islands seen in traditional mine-automation systems. The construction of the network provides a stable foundation for digital communication in the Jining No.3 coal mine.展开更多
Network economy had changed manufacturing environme nt at all. Open global market offer more choice to customer, and it become changea ble and unpredictable as consumers’ needs become more and more characteristic an ...Network economy had changed manufacturing environme nt at all. Open global market offer more choice to customer, and it become changea ble and unpredictable as consumers’ needs become more and more characteristic an d diversified. Various new technology coming forth and application accelerate th e rapid change of the market. The manufacturing enterprises were compelled t o change their strategy by the variability of the market, and time has been put to the all-important place. There is a need driven by the market to set up a ne twork design and manufacturing mode which have rapid market responsiveness. In order to meet the need for network manufacturing, the organization and manage ment of manufacturing enterprise need a completely innovation, next generation o f manufacturing system must have the character such as digitization, flexibility , agility, customization and globalization and so on. As for an enterprise in au to industry, how to gather together the orders through the distribution, and rap id produce the product which can meet the customer’s need, it is the key that th e contemporary enterprises succeed in the competitive market. The competitive market requires rapid product development. Close cooperation amo ng the designers will accelerate the product development by shortening the devel opment cycle, improving the product quality and reducing the investment. It has been emphasized in the methodology of concurrent engineering (CE). But sometimes those partners are distributed in the world, so there is a need for an importan t technology contribution to collaborative engineering, and supporting distribut ed designers for rapid product development. This paper focuses on a collaborative design system: Product Digit Collaborative Design System (PDCDS). The solution of PDCDS can make it more efficient and rel iable to visit teledata as well as we can get it from local database. It will be ease to get the newest design process information aided by PDCDS, and it will h ave higher efficiency by collaborative work. Comparing with other traditional Pr oduct Data Management (PDM) software system, PDCDS have some new characters such as group, dynamicness, synchronization or asynchronism working mode, and the hi story recorder is needed, and it also surport Webservice.展开更多
The power system frequency fluctuations could be captured by digital recordings and extracted to compare with a reference database for forensic timestamp verification.It is known as the Electric Network Frequency(ENF)...The power system frequency fluctuations could be captured by digital recordings and extracted to compare with a reference database for forensic timestamp verification.It is known as the Electric Network Frequency(ENF)criterion,enabled by the properties of random fluctuations and intra-grid consistency.In essence,this is a task of matching a short random sequence within a long reference,whose accuracy is mainly concerned with whether this match could be uniquely correct.In this paper,we comprehensively analyze the factors affecting the reliability of ENF matching,including the length of test recording,length of reference,temporal resolution,and Signal-to-Noise Ratio(SNR).For synthetic analysis,we incorporate the first-order AutoRegressive(AR)ENF model and propose an efficient Time-Frequency Domain noisy ENF synthesis method.Then,the reliability analysis schemes for both synthetic and real-world data are respectively proposed.Through a comprehensive study,we quantitatively reveal that while the SNR is an important external factor to determine whether timestamp verification is viable,the length of test recording is the most important inherent factor,followed by the length of reference.However,the temporal resolution has little impact on performance.Finally,a practical workflow of the ENF-based audio timestamp verification system is proposed,incorporating the discovered results.展开更多
基金supported by the National Natural Science Foundation of China(Grant Nos.62405250 and 62471404)the China Postdoctoral Science Foundation(Grant No.2024M762955)+1 种基金the Key Project of Westlake Institute for Optoelectronics(Grant No.2023GD003)the Optical Com-munication and Sensing Laboratory,School of Engineering,Westlake University.
文摘Propelled by the rise of artificial intelligence,cloud services,and data center applications,next-generation,low-power,local-oscillator-less,digital signal processing(DSP)-free,and short-reach coherent optical communication has evolved into an increasingly prominent area of research in recent years.Here,we demonstrate DSP-free coherent optical transmission by analog signal processing in frequency synchronous optical network(FSON)architecture,which supports polarization multiplexing and higher-order modulation formats.The FSON architecture that allows the numerous laser sources of optical transceivers within a data center can be quasi-synchronized by means of a tree-distributed homology architecture.In conjunction with our proposed pilot-tone assisted Costas loop for an analog coherent receiver,we achieve a record dual-polarization 224-Gb/s 16-QAM 5-km mismatch transmission with reset-free carrier phase recovery in the optical domain.Our proposed DSP-free analog coherent detection system based on the FSON makes it a promising solution for next-generation,low-power,and high-capacity coherent data center interconnects.
基金Supported by National Natural Science Foundation of China(Grant Nos.52205288,52130501,52075479)Zhejiang Provincial Key Research&Development Program(Grant No.2021C01110).
文摘With the increasing attention to the state and role of people in intelligent manufacturing, there is a strong demand for human-cyber-physical systems (HCPS) that focus on human-robot interaction. The existing intelligent manufacturing system cannot satisfy efcient human-robot collaborative work. However, unlike machines equipped with sensors, human characteristic information is difcult to be perceived and digitized instantly. In view of the high complexity and uncertainty of the human body, this paper proposes a framework for building a human digital twin (HDT) model based on multimodal data and expounds on the key technologies. Data acquisition system is built to dynamically acquire and update the body state data and physiological data of the human body and realize the digital expression of multi-source heterogeneous human body information. A bidirectional long short-term memory and convolutional neural network (BiLSTM-CNN) based network is devised to fuse multimodal human data and extract the spatiotemporal features, and the human locomotion mode identifcation is taken as an application case. A series of optimization experiments are carried out to improve the performance of the proposed BiLSTM-CNN-based network model. The proposed model is compared with traditional locomotion mode identifcation models. The experimental results proved the superiority of the HDT framework for human locomotion mode identifcation.
文摘Digital forensics is the science of identifying, extracting, analyzing and presenting the digital evidence that has been stored in the digital devices. Various digital tools and techniques are being used to achieve this. Our paper explains forensic analysis steps in the storage media, hidden data analysis in the file system, network forensic methods and cyber crime data mining. This paper proposes a new tool which is the combination of digital forensic investigation and crime data mining. The proposed system is designed for finding motive, pattern of cyber attacks and counts of attacks types happened during a period. Hence the proposed tool enables the system administrators to minimize the system vulnerability.
文摘Reverse engineering in the manufacturing field is a process in which the digitized data are obtained from an existing object model or a part of it, and then the CAD model is reconstructed. This paper presents an RBF neural network approach to modify and fit the digitized data. The centers for the RBF are selected by using the orthogonal least squares learning algorithm. A mathematically known surface is used for generating a number of samples for training the networks. The trained networks then generated a number of new points which were compared with the calculating points from the equations. Moreover, a series of practice digitizing curves are used to test the approach. The results showed that this approach is effective in modifying and fitting digitized data and generating data points to reconstruct the surface model.
基金Project 50574094 supported by the National Natural Science Foundation of China
文摘A three-layer model for digital communication in a mine is proposed. Two basic platforms are discussed: A uniform transmission network and a uniform data warehouse. An actual,ControlNet based,transmission network plat-form suitable for the Jining No.3 coal mine is presented. This network is an information superhighway intended to inte-grate all existing and new automation subsystems. Its standard interface can be used with future subsystems. The net-work,data structure and management decision-making all employ this uniform hardware and software. This effectively avoids the problems of system and information islands seen in traditional mine-automation systems. The construction of the network provides a stable foundation for digital communication in the Jining No.3 coal mine.
文摘Network economy had changed manufacturing environme nt at all. Open global market offer more choice to customer, and it become changea ble and unpredictable as consumers’ needs become more and more characteristic an d diversified. Various new technology coming forth and application accelerate th e rapid change of the market. The manufacturing enterprises were compelled t o change their strategy by the variability of the market, and time has been put to the all-important place. There is a need driven by the market to set up a ne twork design and manufacturing mode which have rapid market responsiveness. In order to meet the need for network manufacturing, the organization and manage ment of manufacturing enterprise need a completely innovation, next generation o f manufacturing system must have the character such as digitization, flexibility , agility, customization and globalization and so on. As for an enterprise in au to industry, how to gather together the orders through the distribution, and rap id produce the product which can meet the customer’s need, it is the key that th e contemporary enterprises succeed in the competitive market. The competitive market requires rapid product development. Close cooperation amo ng the designers will accelerate the product development by shortening the devel opment cycle, improving the product quality and reducing the investment. It has been emphasized in the methodology of concurrent engineering (CE). But sometimes those partners are distributed in the world, so there is a need for an importan t technology contribution to collaborative engineering, and supporting distribut ed designers for rapid product development. This paper focuses on a collaborative design system: Product Digit Collaborative Design System (PDCDS). The solution of PDCDS can make it more efficient and rel iable to visit teledata as well as we can get it from local database. It will be ease to get the newest design process information aided by PDCDS, and it will h ave higher efficiency by collaborative work. Comparing with other traditional Pr oduct Data Management (PDM) software system, PDCDS have some new characters such as group, dynamicness, synchronization or asynchronism working mode, and the hi story recorder is needed, and it also surport Webservice.
基金funded by National Natural Science Foundation of China(No.62272347,62072343,and 61802284)National Key Research Development Program of China(No.2019QY(Y)0206).
文摘The power system frequency fluctuations could be captured by digital recordings and extracted to compare with a reference database for forensic timestamp verification.It is known as the Electric Network Frequency(ENF)criterion,enabled by the properties of random fluctuations and intra-grid consistency.In essence,this is a task of matching a short random sequence within a long reference,whose accuracy is mainly concerned with whether this match could be uniquely correct.In this paper,we comprehensively analyze the factors affecting the reliability of ENF matching,including the length of test recording,length of reference,temporal resolution,and Signal-to-Noise Ratio(SNR).For synthetic analysis,we incorporate the first-order AutoRegressive(AR)ENF model and propose an efficient Time-Frequency Domain noisy ENF synthesis method.Then,the reliability analysis schemes for both synthetic and real-world data are respectively proposed.Through a comprehensive study,we quantitatively reveal that while the SNR is an important external factor to determine whether timestamp verification is viable,the length of test recording is the most important inherent factor,followed by the length of reference.However,the temporal resolution has little impact on performance.Finally,a practical workflow of the ENF-based audio timestamp verification system is proposed,incorporating the discovered results.
